With the FastFix elbow adapter, you can also reach concealed screws easily and conveniently. The FastFix depth stop guarantees exact, uniform screw-in depths.
Fitted without tools and quickly replaced: the FastFix attachments thus turn a Festool cordless drill into an elbow screwdriver, eccentric screwdriver or depth limiting screwdriver. Fast change between drilling, countersinking and screw driving: the CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred by balls for optimised power transmission and 10-fold higher true running. The EC-TEC drive concept from Festool stands for extraordinary power development with minimised power consumption across the entire speed range from the insertion of large screws to drilling at speeds of up to 1500 rpm. The EC-TEC is wear-free, has no carbon brushes and is thus maintenance-free and extremely robust. Many of our tools have been in operation for more than 30 years. This is no coincidence, but rather the logical consequence of careful development and production according to the slogan Made in Germany. For products that live up to our promise: Tools for the toughest demands.
The added value using the example of the battery packs in the C- and T+3-series: the 12-V batteries can also be used in the 15-V cordless drills. The lithium-ion batteries even match the jigsaw CARVEX PS 400. And the TRC 3 rapid charger charges all batteries quickly and reliably: Li-ion, NiCd and NiMH.
Powerful, or exactly controlled, in extremely tight spaces or for hours on end, with sufficient torque or high speed: the type of work defines the requirements and the Festool system has the answers. With the flexible capacity of the cordless drill series and its system accessories, from the matching quick-change attachments through the bit and drill bit range to the attachable lamp. SYSTAINER, SORTAINER and Systainer-Port protect tools and accessories. The flexibly arranged interior of the SORTAINERs keeps everything neat and tidy and the rollable Systainer-Port provides mobility in very tight spaces. Simple coupling option, including one for Festool mobile dust extractors, saves journeys, guarantees fast work progress and a professional image at the customer s.
NEW
The accessories are just like the CXS cordless drill itself: particularly small and handy. 1. The elbow adapter is for screwdriving around corners and for reaching concealed screws at tight angles. 2. The CENTROTEC quick-change system replaces chuck and bit holder and speeds up the change between drilling, countersinking and screwdriving. 3. The standard chuck is always included in the scope of delivery for all tools with cylindrical shank. Not only always at your fingertips: your hands are also free at the right moment: the belt clip can be attached for right- and left-handers as required. A real powerhouse: with its 10.8 Volts, the CXS meets all challenges. Torque can be adjusted precisely in 12 stages for controlled power development. For tight corners: as with all cordless drills from Festool, with the CXS the bits can also be inserted in the direct bit holder.
This switch really saves time: the torque setting for screwdriving is retained even if you drill now and again at maximum torque. The practical bit holder provides space for up to eight bits - magnetically secured against falling out. Precise work in dark areas with integrated LED light. It can already be activated prior to screwdriving and lights up automatically during work.
The power that reaches the screwhead is decisive. This is why the T+3-series is equipped with a real powerhouse: the EC-TEC motor. The intelligent motor management system converts the energy of the battery into output without almost no loss at all. This permits the T 18+3, for example, to reach new performance ranges. As in the CXS and C-series, the cordless drills in the T+3 series receive their power from lithium-ion battery packs. They are particularly light, efficient and tremendously durable. The light, compact design, the slender Softgrip handle and the perfectly balanced centre of gravity ensure superior handling.
The lithium-ion battery packs in the C- and T+3-series are interchangeable and also match the CARVEX cordless jigsaws.
Thanks to the FastFix interface, the CENTROTEC tool chuck and the attachments are changed in the flash. Every screw can be reached with the FastFix eccentric adapter.
The CENTROTEC Forstner drill bits have replaceable centring points and can be positioned exactly on the spot even when at an angle. They guarantee splinter-free bores in all materials and surfaces in planing quality.