4c 39 404 406 40 409 409 Glass door fittings Glass door hinges Glass door knobs Inset handles for glass doors Glass door handle Glass door stop
Overview 13 4224 Pages 39, 399 13 422 Page 404 13 4220 Pages 400, 401 13 4223 Pages 402, 403 13 4227 Page 405 36 36 Page 409 23 002 Page 406 23 02 Page 407 23 029 Page 407 23 044 Page 406 13 4230 Page 409 42 4256 Page 40 42 4256 Page 40 396 FSB Manual 2012
Fittings for glass doors Glass has always had a multi-layered role in architecture as a design tool and shape-giving material. Glass doors take the interior architectural shape into account. They create more light, link rooms, and radiate a wonderful atmosphere. The transparency of glass doors requires a particularly high level of care when choosing the fittings. The lock area, handle and hinges are what give a glass door its look. With this in mind, we would like to point out one particular solution for a glass door fitting that FSB developed in collaboration with Ingenhoven Architekten. This fitting concept is notable for the absence of any handle roses (including on the heavy-duty version) and for the extremely discreet dimensions, but no less importantly for the fact that when DIN frames are used, flush installation makes it absolutely appealing on every level. A number of additional components by Gira (installation system for ITS 30 partition systems), Mabeg (Comform orientation system) and Inotec (escape route lighting system ITS 30) are available that match the proportions of the glass door fittings. Please contact the manufacturers for full product information. Nor should we forget the particularly charming detail of the glass door fittings of series 13 4224: the dividing line on handle 107 is congruent with the edge of the glass door fitting. Colour can also be introduced if desired: the glass door fitting and handle set can also be powder-coated in any colour on the RAL colour chart. Fittings in the series 13 4220 / 13 4223 can optionally be fitted with or without a rose handle set, which offers the option to use door handle sets with AGL heavy-duty bearings for heavy or large-sized glass doors. Glass door fittings with the electric access control function (system EZK) match the consistent design of the FSB handle ranges. What makes these fittings so innovative and unique on the market is that they can also be fitted to all-glass doors and used for an electronic access control function that operates on a number of buildings, so these concepts are no longer limited to active or inactive leaf doors. You will find detailed information on page 41ff. There is also the option to fit the locks of the glass door fittings of series 13 4220 and 13 4223 with an anti-panic function (APD) in combination with EZK please state when ordering. Hinges to match the glass door fittings are the perfect complement to the FSB programme. All of the fittings in this chapter can be combined with almost any of the door handles in the FSB programme. 4c 397
Glass door fi tting compact 13 4224 A13 4224 042 (R) 13 4224 052 (L) Glass door fitting, rectangular, compact, with cover plates, with heavy-duty glass lock (DIN 1251-1, class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic / die casting combination, low-noise Bolt head made of bright nickel-plated casting. Door handle heavy-duty bearing in aluminium/stainless steel, Teflon-coated, to match FSB door handles Ill.: DIN right 56,5 60 170 72 74 5,2 41,6 20,5 9 16,1 fsb.de/134224 The door handle shown here is a design suggestion. Can be combined with almost any FSB door handle. Please state direction with order 39 FSB Manual 2012
Lock case compact for double-leaf doors 13 4224 B13 4224 045 (R) 13 4224 055 (L) Lock case, rectangular, compact, to match glass door fitting 13 4224 042 (R) 13 4224 052 (L) Ill.: DIN left 4c 56,5 60 170 170 72 104 5,2 16,1 104 74 5,2 R2 9 9 9 16,1 fsb.de/134224 Please state direction with order 399
Glass door fittings 13 4220 C13 4220 041 (R) 13 4220 051 (L) B13 4220 042 (R) 13 4220 052 (L) Glass door fitting rectangular, with cover plates, with heavy-duty glass door lock (DIN 1 251-1, based on class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic / die casting combination, low-noise 13 4220 041 (R) 13 4220 051 (L) PC-ready, bolt head made of bright nickelplated casting, door handle bushing made of glass fibre reinforced polyamide, suitable for FSB door handle 13 4220 042 (R) 13 4220 052 (L) PC-ready with switch, bolt head made of bright nickel-plated casting, prepared for the installation of rose sets Standard and FSB heavy-duty fittings with AGL bearing in rose version Also available as an EZK version (see page 41 ff.) and with self-locking anti-panic lock Ill.: DIN right 56,5 6 14 72 1 10 20,5 21,5 96 fsb.de/134220 The door handle shown here is a design suggestion. Can be combined with almost any FSB door handle. Please state direction with order 400 FSB Manual 2012
Lock case for double-leaf doors 13 4220 B13 4220 045 (R) 13 4220 055 (L) Lock case rectangular to match glass door fittings 13 4220 041 (R) 13 4220 051 (L) 13 4220 042 (R) 13 4220 052 (L) Ill.: DIN left 4c 56,5 6 14 14 72 111 10 111 1 10 21,5 21,5 96 96 96 fsb.de/134220 Please state direction with order 401
Glass door fi ttings 13 4223 C13 4223 041 (R) 13 4223 051 (L) B13 4223 042 (R) 13 4223 052 (L) Glass door fitting, rectangular, rounded, with cover plates, with heavy-duty glass lock (DIN 1251-1, based on class 4) PC 72 mm, mm steel clamp nut with a polyamide bearing ring Trap made from a plastic/die casting combination, low-noise 13 4223 041 (R) 13 4223 051 (L) PC-ready, bolt head made of bright nickelplated casting, door handle bushing made of glass fibre reinforced polyamide, suitable for FSB door handle 13 4223 042 (R) 13 4223 052 (L) PC-ready with switch, bolt head made of bright nickel-plated casting, prepared for the installation of rose sets Standard and FSB heavy-duty fittings with AGL bearing in rose version Also available as an EZK version (see page 41 ff.) and with self-locking anti-panic lock Ill.: DIN right 56,5 6 14 72 1 10 20,5 21,5 96 fsb.de/134223 The door handle shown here has been allocated as a design element. Can be combined with almost any FSB door handle. Please state direction with order 402 FSB Manual 2012
Lock case for double-leaf doors 13 4223 B13 4223 045 (R) 13 4223 055 (L) Lock case, rectangular, rounded, to match the glass door fittings 13 4223 041 (R) 13 4223 051 (L) 13 4223 042 (R) 13 4223 052 (L) Ill.: DIN left 4c 56,5 6 14 14 72 111 10 111 1 10 21,5 21,5 96 96 96 fsb.de/134223 Please state direction with order 403
Glass door hinge rectangular 13 422 BVARIANT glass door hinge made of chrome-plated matt steel to match FSB finish aluminium 0105 or stainless steel, with hinge connection to match glass door fittings of the series 13 4220 and 13 4224 1 42 45 95 27 74 VARIANT heavy-duty hinge 13 422 00101 for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements 13 422 00101 13 422 00102 13 422 00102 for glass doors on rebated steel frames with three-dimensionally adjustable holding elements 13 422 00103 for glass doors on rebated steel frames 13 422 04104 (R) 13 422 05104 (L) for glass doors on rebated wooden wraparound and block frames 13 422 00103 13 422 04104 05104 fsb.de/13422 Loading capacity: 60 kg, 2 hinges 90 kg, 3 hinges Glass door hinges prepared at the factory for glass thicknesss and 10 mm Further technical information on page 414 f. 404 FSB Manual 2012
Glass door hinge round 13 4227 BVARIANT glass door hinge made of chrome-plated matt steel to match FSB finish aluminium 0105 or stainless steel, with hinge connection to match glass door fittings of series 13 4223 4c 1 42 45 95 27 74 VARIANT heavy-duty hinge 13 4227 00101 for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements 13 4227 00101 13 4227 00102 13 4227 00102 for glass doors on rebated steel frames with three-dimensionally adjustable holding elements 13 4227 00103 for glass doors on rebated steel frames 13 4227 04104 (R) 13 4227 05104 (L) for glass doors on rebated wooden wraparound and block frames 13 4227 00103 13 4227 04104 05104 fsb.de/134227 Loading capacity: 60 kg, 2 hinges 90 kg, 3 hinges Glass door hinges prepared at the factory for glass thicknesss and 10 mm Further technical information on page 414 f. 405
Doorknobs for glass doors 23 002 23 002 00007 Aluminium Stainless steel Bronze Brass X = 77 mm X = 73 mm X = 72 mm X = 72 mm Drill Ø 13 mm X 50 23 044 23 044 00007 Design: Jasper Morrison Drill Ø 13 mm 0 52 fsb.de/23002 fsb.de/23044 Fixed knobs Fixed doorknobs are usually mounted directly on glass doors. A lock is not used. The doorknobs are connected by an mm square spindle (for two drill holes) when they are mounted. 406 FSB Manual 2012
Doorknobs for glass doors 23 02 23 02 00007 Drill Ø 13 mm 4c 52 45 23 029 23 029 00007 Aluminium Stainless steel Bronze Ø = 50 mm Ø = 55 mm Ø = 50 mm Drill Ø 13 mm 52 Ø fsb.de/2302 fsb.de/23029 Fixed knobs Fixed doorknobs are usually mounted directly on glass doors. A lock is not used. The doorknobs are connected by an mm square spindle (for two drill holes) when they are mounted. 407
Inset handles for glass doors 42 4256 Product no. B A 42 4256 00100 mm 16 mm 42 4256 00200 10 mm 1 mm 42 4256 00300 12 mm 20 mm Glass thickness = B, total thickness = A open version pair, for inner and outer side glass cut-out Ø 70 mm mounted without adhesive, screwed in pair with through fixing using 3.9 mm countersunk screws, included in delivery A 75 4 B 2 42 4256 Product no. B A 42 4256 00101 mm 20 mm 42 4256 00201 10 mm 22 mm 42 4256 00301 12 mm 24 mm Glass thickness = B, total thickness = A closed version pair, for inner and outer side glass cut-out Ø 70 mm mounted without adhesive, screwed congruntly in pairs using 3.9 mm countersunk screws, included in delivery A 75 4 B 2 fsb.de/424256 40 FSB Manual 2012
Glass door handle and door stop 36 36 Fixed in pairs and going through on one side; see page 492 Design: Christoph Ingenhoven 4c 66 30 210 13 4230 Product no. B A 13 4230 000 mm 27 mm 13 4230 010 10 mm 29 mm 13 4230 012 12 mm 31 mm Glass thickness = B, total thickness = A 40 50 B 25 A Ø 10 fsb.de/3636 fsb.de/134230 409
Technical information Fittings for glass doors Door handle fittings for glass door locks In addition to its own range of glass doors, FSB can also adapt its entire door handle/knob handle programme to the standard commercial glass door fittings manufactured by its competitors (with just a few exceptions). Just a few minor technical changes to the door handle connection and fixing order need to be taken into account. To prevent misunderstandings, the lock type should be given as precisely as possible when ordering door handles and door knobs for glass door locks (e. g. the manufacturer s name and order number). Door handles for glass doors Door handles with round or oval cross sections can be used in lots of different ways for opening glass doors or as safety handle constructions and as design elements with special fixing tools for mounting in pairs or individually. FSB can utilise existing special solutions for glass doors and also develop individual handle designs. You will find the standard fixing solutions for glass doors and the individually available door handle models starting on page 419. Please order in plenty of time to allow for the adaptation to be carried out. Delivery ex warehouse is not possible. Glass doot fitting compact 13 4224 FSB glass door fitting 13 4224 closes flush with DIN frames, and combines the door frame and fitting in a single visual unit. Of course, non-din frames can also be used, but in this case we cannot guarantee that they will fit flush against the frame. Can also be used in combination with partition wall systems. The transparency of the glass door is enhanced by the discreet dimensions of the lock cover, which at 170 x 9 mm is some 10 % less than on other glass door fittings. This reduction is achieved thanks to the development of a special lock that is easily on a par with the solidity and function of other large locks, and furthermore is suitable for all glass door sizes. We have also developed a special heavy-duty bearing in the form of a Teflon-coated bearing sleeve that encompasses the door handle along its entire guide length, and can also cope with the mechanical loads associated with large-sized glass doors. Designs: deadlock (LL) without key hole bathroom / WC: Please state when ordering, since the fittings are prepared at the works for the WC locking set 17 1735 09005 as standard. The WC lock is mounted on-site, and is to be ordered separately. Order information for 13 4220 13 4223 13 4224 Door handles are not included in the delivery of glass door fittings. When ordering, please provide the following information and refer to the glass doors and fitting: the desired door handle design the fitting design for standard or heavyduty bearing the DIN direction Designs for 13 4220 13 4223 deadlock (LL) without key hole bathroom/wc fittings prepared for WC lock sets from FSB s delivery programme (see page 23). Please order WC lock sets separately; assembly on-site. Dimensions for 13 4220 13 4223 13 4224 Dimensions based on glass thickness mm. The glass door fittings and lock cases are prepared at the works for glass thicknesses and 10 mm (13 4224 on enquiry). 410 FSB Manual 2012
Door dimensions to DIN 1 101 34 for frame dimension 41 34 for frame dimension 41 214,5 237 35,5 hinge reference line 237 232 35,5 hinge reference line 16 45 1972 for frame dimension 193 16 45 1972 for frame dimension 193 4c 57 57 1435 1435 1435 0 1435 0 50 50 960 960 35,5 hinge reference line 35,5 hinge reference line 45 45 16 16 13 4227 00101 13 4227 00102 13 422 00101 13 422 00102 13 4227 00103 13 4227 04104 (R) 13 4227 05104 (L) 13 422 00103 13 422 04104 (R) 13 422 05104 (L) Approximate carcass dimensions 750 x 2,000 mm 75 x 2,000 mm 1000 x 2,000 mm Frame rebate dimensions 716 x 1,93 mm 41 x 1,93 mm 966 x 1,93 mm Standard glass dimensions 709 x 1,972 mm 34 x 1,972 mm 959 x 1,972 mm Approximate carcass dimensions 750 x 2,125 mm 75 x 2,125 mm 1000 x 2,125 mm Frame rebate dimensions 716 x 2,10 mm 41 x 2,10 mm 966 x 2,10 mm Standard glass dimensions 709 x 2,097 mm 34 x 2,097 mm 959 x 2,097 mm 411
Series 13 4220 and 13 4223 Door handle specification 20,5 42 Glass door fittings of the series 13 4220 041/051 and 13 4223 041/051 specifically require these matching door handle pairs with a shorter door handle base on one side. When ordering, this specification will be made by our sales staff. Bearings Glass door fittings of the series 13 4220 042/052 and 13 4223 042/052 (rose set version) can be fitted either with standard bearings or with AGL bearings. 39 20,5 54 CStandard BAGL Profile cylinder 39 13 26 min. 27,5 min. 27,5 55 For aesthetic reasons, profile cylinders 27.5/27.5 mm long are recommended for all glass door fittings because of the comparatively small cylinder projection. Bathroom and WC versions The glass door fittings can also all be used as a bathroom/wc version. The series 13 4220 and 13 4223 can be fitted with any WC bolt in FSB s delivery programme (see page 23). Please order separately for fitting on-site. 39 20,5 The fittings are equally suitable for doors that open inwards and outwards. fsb.de/134220 fsb.de/134223 412 FSB Manual 2012
Series 13 4224 Door handle specification 20,5 41,6 The glass door fittings of series 13 4224 042/052 require special door handle pairs with a different pin projection from the FSB standard. When ordering, this specification will be made by our sales staff. Bearing In series 13 4224 042/052, the bearing elements are integrated in the shape of a suitable Teflon-coated bearing sleeve that encompasses the handle shank along its entire guide length and can reliably withstand the mechanical loads that occur on heavy-duty glass doors. Does not require additional roses with heavy-duty bearings. BSuitable bearings 4c Profile cylinder 29,3 9 20,3 25 (27,5) 25 (27,5) 50 (54) For aesthetic reasons, profile cylinders 25/25 mm or 27.5/27.5 mm long are recommended for all glass door fittings because of the comparatively small cylinder projection. Profile cylinders 25/25 mm can be checked for their suitability in lock systems in individual cases. Bathroom and WC versions 29,3 20,5 Please state WC version when ordering. A special WC bolt set 17 1735 09005 is required for this fitting. The fittings are equally suitable for doors that open inwards and outwards. fsb.de/134224 413
Hinge connections 13 4227 and 13 422 241 214,5 241 214,5 35,5 35,5 0 45 70 45 hinge reference line hinge reference line hole Ø 16 mm hole Ø 16 mm 241 232 241 232 35,5 35,5 35 45 11,5 22 45 hinge reference line hinge reference line hole Ø 16 mm hole Ø 16 mm The hinge connections and their position to the hinge reference line need to be aligned to the drill holes in the glass door. Please note this requirement in connection with FSB heavy-duty hinges 13 4227 00101 or 3 4227 00102, and 13 422 00101 or 13 422 00102 in particular. 414 FSB Manual 2012
Frame connection dimension 13 4227 and 13 422 2 2 0 VARIANT heavy-duty hinge for glass doors on rebated wood, steel or aluminium frames with three-dimensionally adjustable holding elements VX aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm no-twist screw pin concealed maintenance-free axial-radial plain bearing can be combined with holding element: for block frames VX 7501 3D for lining frames VX 7502 3D for block frames VX 7505 3D for steel frames VX 7611 3D VX 7612 3D for aluminium frames VX 7521 3D can be used on right and left 24 24 70 VARIANT heavy-duty hinge for glass doors on rebated steel frames with three-dimensionally adjustable holding elements aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm no-twist screw pin concealed maintenance-free axial-radial plain bearing can be combined with holding element VN 760/120 3D can be used on right and left 4c VARIANT heavy-duty hinges for glass doors on rebated steel frames for holding elements V 600 or V 610 can be used on right and left 30 17,5 35 aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm 30 17,5 11,5 22 VARIANT heavy-duty hinge for glass doors on rebated wooden wrap-around and block frames aligned for all-glass doors with a standard vertical drilling diagram for glass thicknesses and 10 mm for holding elements series V 3600, V 3610, V 3630, V 3650, V 3690 and terminal block V 3604 or V 3607 DIN direction required Please refer to the current SIMONSWERK manual for further information on hinges, hinge connections, frame fixing elements etc. 415