SNAP-IN PLUGS Flush Front Type (Flush - fits -6 gauge material) NIA 659* NIA 659- NIA NIA 0 NIA 0-S NIA 7 NIA NIA 8 NIA NIA 65 Fits Hole Size A B D E F /8 /8 / -/ - /6 - -5/ -7/6-5/6.0.0.50.675.675.70.790.90.070.50.75.75..65.65.680.00.0.05.00..55.556.65.000.0.0.00.00.0.060.00.080.080 Std. Pkg. 0,000 8,000 0,000 7,000 NIA 57 NIA NIA 5 NIA 6 NIA 7 -/6 - -/ - -9/6 - - -/8-7/6.0.90.50.790.080.00.50..00.050.00.60.00.0.0.05.00.00,,,000,, Type : Flush front. Type : Recessed front. Snap-In Plugs are tough, flexible ÒfinishingÓ plugs used extensively in all sheet metal work to seal access holes. Insertion is a snap. Thanks to an internal bead, they hold on tight when the handling gets tough. Snap-In Plugs are used by auto rustproofers, on refrigeration units, water heaters, steel doors, paint cans, lawn mowersðeven piggy banks! These can be hot stamped with your logo to provide a unique and attractive solution for product identification. all us for a quote on hot stamping. NIA 9 NIA 7 NIA NIA NIA 5* NIA 5-S* -/ - - Type (Recessed) NIA - NIA - NIA 8- NIA - NIA 65- NIA - NIA 5- NIA 8- NIA 6- NIA 7- NIA 9- NIA - -/8 -/8 -/ -/.580.675.060.780.00.00.50.65.000.00.00.75.50.850.650.900.900.00.00.0.50.075.080.0 Fits Hole Size A B D E F / -/ - -/ - - -/ -5/ - -/8-7/6 - - -/8 -/8 -/ Minimums available on request..58.800.95.050.08.550.675.800.050.570.060..000.50..65.000..000.0.660.795.90.000.70.0.50.670.90.00.90.70.55.60.60.0.50.60.60.80.60.90.85.60.70.60.80.0 50 00 Std. Pkg. 8,000,000,,000,, Black Low Density Polyethylene Tolerances on all decimal dimensions are ±.00 per inch (example:. ±.00 per inch =.05). Tolerances for fractional dimensions are ± /Ó per inch. Heat distortion temperatures are as follows: Low Density Polyethylene: 00- F (66 P.S.I.) Medium Density Polyethylene: 0-65 F (66 P.S.I.) High Density Polyethylene: 0-80 F (66 P.S.I.) ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689
HOLE PLUGS DOME PLUGS lose unneeded chassis holes. Moulded of black nylon, these feature a convex, matte finish head that tapers to a thin edge. Gives your product an uninterrupted, completed surface you can even paint over. No tools required. Just a quick push locks these firmly into chassis up to " thick. Heyco has hole plugs for all occasions and in virtually every size you'll ever need. Plug unwanted holes, provide ventilation, allow viewing access, seal against liquidsðthese are just some of the things you can do with our hole plugs. For further information about hole plugs and other Heyco products, ask for the most current Heyco catalogue. Mounting Hole Diameter A B Diameter Overall Height Maximum hassis Minimum Order Qty. DP87 DP50 DP DP75 DP7.87.50..75.7 5/6 /8 5/ 7/ 5/6 5/6 5/6 DP DP56 DP65 DP687 DP750..56.65.687 / / 5/ 59/6 DP8 DP875 DP000 DP09 DP87.8.000.09*.87 5 -/6 -/6-7/ -5/6 9/6 9/6 9/6 9/6 DP50 DP75 DP DP750 DP000.50.75..000 5/6 -/8 -/ -/6-9/ -9/6 9/6 9/6 9/6 9/6 5/ 00 00 DP.09 DP.5 DP.5 DP.0 DP.75 DP.5 DP.0.09**.50..000.75..000 - - -/ -/6 -/ -/ -5/ Standard colour: Black. Other colours available at premium charge if quantities are sufficient..50.50.50.50.50.50.50 00 00 00 00 00 00 50 * can be used up to diameter ** can be used up to diameter ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689
HOLE PLUGS ONTINUED SHORTY PLUGS MAXIMUM HASSIS THIKNESS Use when space inside the panel is a problem. Shorty plugs have a limited (/8Ó) protrusion inside the panel. They have a matte finish head tapering to a thin edge for a smooth finished look. Quickly and easily installed. A Mounting Hole Diameter A B Diameter Overall Height Maximum hassis SP8 SP8 SP SP SP75.8.8...75 9/ / /8 5/ SP06 SP7 SP68 SP SP5.06.7.68..5 5/ 7/ 7/ 9/ SP59 SP65 SP750 SP78 SP875.59.65.78 / 7/ 5 / Minimum order 000. Standard colour: Black. Other colours available at premium charge if quantities are sufficient. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689 5
HOLE PLUGS ONTINUED VENT PLUGS Just like a dome plug, but with holes that permit air ventilation and heat dissipation. It leaves you with an attractive cover for unsightly or roughedged chassis holes. Twenty sizes for use in /" to " diameter holes. Quick and easy installation with only fingertip pressure. ALSO AVAILABLE: PRY OUT PLUGS INSULATION PLUGS PAPER TUBE PLUGS The Ó to 6Ó polyethylene paper tube plugs come with convenient fingerpull tabs (one or two, depending on size), and are /" deep. Standard colour is natural white. Other colours available (minimum order 0,000). The 8" to " diameters only come in black high density polyethylene. They have a wide flange for easy removal from tubes, and are -" deep. Fits Tube ID Fits Tube ID TP 000 TP 50 TP 75 TP - -/8 -/ TP 750 TP 000 TP TP 000 - -/ TP 750 TP 000 TP 50 TP - - -/ TP 0 TP 6000 TP 8000 TP 0000 TP 000 5 6 8 0 6 ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689
HOLE PLUGS ONTINUED DOUBLE D PLUGS Got a strain relief hole where it shouldn't be? Don't start again; just fill it with a double "D" plug. These work for other chorded or "DD" holes as well (holes punched or moulded with two opposing flats). The convex, matte finish head tapers to a thin edge, giving your chassis a completed look. All sizes have a head thickness of ", and fit a maximum chassis thickness of. Mounting Hole Diameter D To Prevent Rotation B Diameter Overall Height DD7-90 DD-5 DD56-50 DD65-550 DD750-65 DD875-770.7..56.65.90.5.50.550.65.770 7/ / / 59/6 -/6 9/6 Minimum order 000. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689 7
UNIVERSAL PLUG GLIDES FLAT HEAD - gauge Tube OD Tube OD U / U U U U U X* *0- gauge. / U -/8 U - U -/ U - U -/8 - -/ - SQUARE Tube OD Tube OD UT UT UT UT X* UT - *0- gauge. - UT -/ UT UT X* UT -/ -/ -/ BALL HEAD Tube OD Tube OD UB UB UB / UB / UB - UB -/ UB - - -/ - RETANGULAR UP X UP -/ X UP X -/ Tube OD X -/ X X -/ 8 ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689
PLUG GLIDES Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications. Ask about our Ball Glides and Oval Glides. Round Plug Glides Size Gauge PG.65 PG PG PG.000 PG PG.50 PG.75 -/8 - -/8 6 Size Gauge PG. PG PG PG.000 PG.50 PG. -/ - - - -/ 8 6 6 Square Plug Glides Size Gauge PGS.65 PGS PGS PGS.000 8 PGS.50 PGS. PGS.000 - -/ Rectangular Plug Glides Size Gauge PGR.X PGR.X.5 PGR X.5 PGR.000X / X / X -/ X -/ X Angled Square Plug Glides Size Gauge PGA PGA Standard olour: Black. Also available: White. Other sizes and gauges available for all styles. Other styles also available. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: -800-6-5080 Fax: (6) -689 9