WKM Valves Triple Offset Valves

WKM Valves Triple Offset Valves High-quality, bidirectional valves for critical applications in demanding markets

ontents Triple offset geometry.......................................... 3 Major markets................................................... 4 pplications...................................................... 5 Part list: 3 to 24 in.............................................. 6 Lug pattern dimensions: 3 to 24 in.......................... 7 Short pattern dimensions: 3 to 24 in......................11 Long pattern dimensions: 3 to 24 in.......................15 Gear operator dimensions....................................19 Pressure and temperature ratings (SME B16.34).....21 Weights..........................................................21 v vs. disc angle................................................22 How to order....................................................23 The Difference Manufacturing The portfolio of WKM* valves include the triple offset valve (TOV), built with the manufacturing excellence and commitment to quality that comes with all ameron products. ombined with arduous qualification and testing processes that simulate valve life cycle, the TOV sets a new benchmark for performance. Support Our commitment to global support and strategic networks brings the TOV to markets where it s needed, when it s needed fully designed, tested, qualified, and backed by ameron. The TOV meets the demanding requirements for bidirectional shutoff, delivery, and quality. Organization Our global network of strategic partners helps distribute high-quality valves for critical applications. With millions of valves manufactured by ameron and delivered around the world, our portfolio also includes ORBIT* rising stem ball valves, TBV* valves, and NEWO* gate, globe, and check valves as part of the ameron family. Strong global distribution network Industry leader in valve technology and innovation Broadest portfolio of quarter-turn valves in the industry In-house engineering and manufacturing ommitment to health, safety, and the environment 2

WKM Valves Triple Offset Valves The TOV completes our reliable, performance-proven, quarter-turn butterfly valve portfolio. The true triple offset geometry of this valve allows for bubble-tight sealing to create a valve that delivers fully bidirectional zero-leakage shutoff per PI Standard 598. Backed by our world-class engineering, manufacturing, and sourcing expertise, the TOV provides a trusted solution ideal for crucial applications. Operators around the world rely on our dedication to high-quality standards, competitive manufacturing processes, and world-class support for total valve life cycle support. dvantages True triple offset geometry Fully bidirectional zero-leakage shutoff per PI 598 Field-replaceable metal seat Life cycle tested as a bubble-tight bidirectional valve Standard bearing seals Self-centering disc vailable in a wide range of configurations: lug and short (ISO) and long pattern arbon and stainless steel standard; other materials on request Triple Offset Geometry Seat ellipse Seat cone surface Pipe and valve center line Offset 3 Offset 2 Shaft center line Seat cone axis Offset 1 ompliance and Specifications PI Standard 609 SME B16.34 SME B16.5 PI Standard 598 ISO-5752 flange dimension SME B16.47 for Series mating pipe flange dimensions for valve sizes 26 in and larger, lasses 150, 300, and 600 SME B16.10 MSS-SP-55 ISO 5211 PI Standard 607, latest edition for fire testing Fugitive-emissions testing per PI Spec 641 and ISO 15848-1 Offset 1 provides full 360 uninterrupted sealing. Offset 2 provides eccentric rotation of the disc that swings the seal ring completely off the seat upon opening. Offset 3 moves the centerline of the cone rotation laterally from the centerline of the disc rotation, enabling the cone to seal without rubbing. 3

Major Markets Power and steam District heating Bitumen Petrochemicals (refining and chemicals) oking Reformers cracking Tank switching Ethylene Butadiene Isocyanates plastics Flange onnections Lug pattern per PI 609 Midstream Tank and terminal Tank switching Long pattern for gate valve replacement Storage for all types of hydrocarbons and chemicals Liquid transfer Upstream production Process equipment Separation molecular sieve Switching Floating production platforms Manifolds Slurry, oil sands, and SGD methods Secondary recovery Short pattern per ISO 5752/PI 609 Long pattern per SME B16.10 and PI 609 4

pplications Oil and gas ritical isolation Steam piping and condensate Offshore platforms ooling water systems Seawater Produced fluids processing systems Refining and petrochemical processing Hydrocarbon processing Hydrogen Oxygen Thermal fluids Hot gases Sulfur (tail gas) hemical solvents hlorinated solvents Flare gas Liquefied natural gas LNG storage LNG production Power and district heating Steam isolation Hot water control systems Geothermal steam Midstream Tank isolation Manifold system isolation Metering systems SD systems 5

Part List: 3 to 24 in SME lass 150, 300, and 600 lug, short, and long pattern 23 20 27 28 21 29 30 19 18 17 16 15 14 5 7 8 9 10 7 6 4 3 2 1 13 24 Item Part Material STM Specification Material STM Specification 1 Bottom cap arbon steel 105 Stainless steel 182 F316 2 Spiral-wound (SW) SS316 and graphite SS316 and graphite gasket 3 Thrust washer INONEL X-750 INONEL X-750 4 Split ring Stainless steel Stainless steel 182 F316 5 Solid bearing top Stainless steel Stainless steel 182 FXM-19 with nitriding 6 Solid bearing bottom Stainless steel 182 FXM-19 with nitriding Stainless steel 7 Bearing seal Graphite Graphite 8 Body arbon steel 216 carbon steel Stainless steel (WB) and Stellite 182 FXM-19 with nitriding 351 F8M and Stellite 9 Disc arbon steel 216 WB Stainless steel 351 F8M 10 Retainer arbon steel 516 Grade 70 Stainless steel 240 316 11 Seal ring Duplex and graphite 182 F51 Duplex and graphite 182 F51 12 Seal ring gasket Stainless steel and graphite 13 Seal locating pin 17-4PH condition H1150D 564 630 Stainless steel and graphite 17-4PH condition H1150D 564 630 14 Packing washer Stainless steel 182 F316 Stainless steel 182 F316 15 Packing Graphite Graphite 16 Packing bushing Stainless steel 182 F316 Stainless steel 182 F316 17 Blowout ring 17-4PH condition H1150D 564 630 17-4PH condition H1150D 564 630 18 Mounting bracket arbon steel 1020 arbon steel 1020 19 Shaft 17-4PH condition 564 630 17-4PH condition 564 630 H1150D H1150D 20 Key Steel ISI 1045 Steel ISI 1045 21 Packing retainer arbon steel 216 WB Stainless steel 351 F8M 22 enter key Stainless steel 182 F316 Stainless steel 182 F316 23 Wedge pin 17-4PH condition H1150D 24 Socket head cap screw (SHS) 564 630 17-4PH condition H1150D 564 630 arbon steel 193 B7M Stainless steel 453 660D 25 SHS arbon steel 193 B7M Stainless steel 453 660D 26 SHS arbon steel 193 B7M Stainless steel 453 660D 27 Stud arbon steel 193 B7M Stainless steel 453 660D 28 Hex nut arbon steel 194 2HM Stainless steel 453 660D 29 Stud arbon steel 193 B7M Stainless steel 453 660D 30 Hex nut arbon steel 194 2HM Stainless steel 453 660D 31 Nameplate Stainless steel Stainless steel 32 Dowel pin arbon steel 105 Stainless steel 182 F316 Recommended spare parts 25 Part not shown Notes Basic design application requirements of PI 609B and SME B16.34 Pressure test PI 598 End flanged SME B16.5 Face-to-face dimensions and tolerances PI 609B Fire test PI 607 ctuation mounting ISO 5211 Materials meet the requirements of NE MR0103 and MR0175 6

Lug Pattern Dimensions: 3 to 24 in per PI 609 SME lass 150, 300, and 600 U f9 N2 M H2 Z L3 For two keys B h9 +0.000/ 0.006 TYP N1 M H1 L2 L P S F For single key T K Section R L1 J G E X View D Y Lug Pattern Dimensions: 3 to 24 in per PI 609, SME lass 150, 300, and 600 Size, in lass f9 B h9 +0.000/ 0.006 No. of Keys D E F G K L L1 L2 L3 3 150 0.83 0.24 0.51 1 1.85 3.70 0.49 0.98 1.88 12.68 4.27 3.94 4.47 300 0.83 0.24 0.51 1 1.85 3.70 0.49 0.98 1.88 13.82 4.67 4.72 4.43 150 0.83 0.24 0.51 1 1.85 3.70 0.49 0.98 2.12 14.65 5.02 5.16 4.47 4 300 0.83 0.24 0.51 1 1.85 3.70 0.49 0.98 2.12 15.63 5.57 5.51 4.55 600 1.02 0.32 0.63 1 2.76 5.51 0.31 1.02 2.50 20.00 7.56 7.52 4.92 150 0.98 0.32 0.61 1 2.17 4.33 0.47 0.95 2.25 17.09 5.87 6.30 4.92 6 300 1.18 0.32 0.75 1 2.76 5.51 0.51 1.02 2.31 20.12 7.09 8.07 4.96 600 1.42 0.47 0.91 1 2.95 5.91 0.67 1.34 3.06 25.59 9.53 10.04 6.02 150 1.26 0.32 0.75 1 2.76 5.51 0.51 1.02 2.50 19.76 7.09 7.76 4.92 8 300 1.50 0.39 0.91 2 2.76 5.51 0.67 1.34 2.88 21.79 8.21 8.66 4.92 600 1.81 0.55 1.10 2 3.45 6.89 0.89 1.77 4.00 27.60 10.35 10.71 6.54 150 1.42 0.39 0.87 1 2.76 5.51 0.67 1.34 2.81 23.19 8.78 9.33 5.08 10 300 1.58 0.47 0.97 2 3.25 6.50 0.79 1.58 3.25 26.14 9.69 10.24 6.22 600 2.17 0.63 1.32 2 4.43 8.86 1.06 2.13 4.62 32.32 11.81 12.20 8.31 150 1.65 0.47 1.00 1 3.25 6.50 0.79 1.58 3.19 27.01 9.92 10.79 6.30 12 300 1.81 0.55 1.10 2 3.45 6.89 0.89 1.77 3.62 30.31 11.10 11.81 7.40 600 2.56 0.71 1.56 2 5.91 11.81 1.88 3.15 5.52 34.65 13.27 13.39 7.99 150 1.77 0.55 1.10 2 3.45 6.89 0.89 1.77 3.62 32.44 11.26 13.00 8.19 14 300 2.17 0.63 1.32 2 4.43 8.86 1.06 2.13 4.62 35.91 12.60 13.78 9.53 600 2.95 0.79 1.79 2 5.91 11.81 1.58 3.15 6.12 39.84 14.25 14.88 10.71 150 1.97 0.63 1.22 2 3.45 6.89 0.89 1.77 4.00 35.28 12.52 14.37 8.39 16 300 2.56 0.71 1.56 2 5.91 11.81 1.58 3.15 5.25 40.47 13.94 15.35 11.18 600 3.35 0.87 2.03 2 6.99 13.98 1.77 3.54 7.00 45.59 15.94 16.54 13.11 150 2.28 0.71 1.42 2 4.43 8.86 1.06 2.13 4.50 38.47 13.78 15.55 9.13 18 300 2.76 0.79 1.73 2 5.91 11.81 1.58 3.15 5.88 43.94 15.16 17.13 11.65 600 3.74 0.87 2.22 2 6.99 13.98 1.77 3.54 7.88 50.79 17.99 18.50 14.29 150 2.68 0.71 1.61 2 4.43 8.86 1.06 2.13 5.00 41.65 15.12 16.93 9.61 20 300 3.07 0.87 1.89 2 6.99 13.98 1.77 3.54 6.25 48.74 17.05 18.70 13.00 600 4.13 0.87 2.42 2 7.99 15.98 2.26 4.53 8.50 54.49 19.17 20.47 14.84 150 3.07 0.87 1.89 2 5.91 11.81 1.58 3.15 6.06 48.41 17.50 19.29 11.61 24 300 3.62 0.87 2.17 2 6.99 13.98 1.77 3.54 7.12 55.71 19.37 21.46 14.88 600 5.12 1.10 3.19 2 7.99 15.98 2.26 4.53 9.13 59.21 21.14 22.24 15.83 Face-to-face dimensions and tolerances per PI 609B 7

Lug Pattern Dimensions: 3 to 24 in per PI 609 U f9 N2 M H2 Z L3 B h9 For two keys +0.000/ 0.006 TYP N1 M H1 L2 L P S F For single key T K Section R L1 J G E X View D Y 8 Lug Pattern Dimensions: 3 to 24 in per PI 609, SME lass 150, 300, and 600 Size, in lass R P S M N1 N2 H1 H2 J T U X Y Z 3 150 6.00 4 M8 1.25 0.625 11 UN 4 0.79 2.54 1.77 4.33 1.57 1.70 300 6.62 4 M8 1.25 0.75 10 UN 8 0.79 2.54 1.77 4.33 1.81 1.70 150 7.50 4 M8 1.25 0.625 11 UN 8 0.94 2.54 1.77 4.33 1.65 1.70 4 300 7.88 4 M8 1.25 0.75 10 UN 8 0.94 2.54 1.77 4.33 1.89 1.70 600 8.50 4 M12 1.75 0.875 9 UN 8 1.02 3.47 2.17 6.50 2.28 2.09 150 9.50 4 M10 1.50 0.75 10 UN 8 0.94 2.74 2.17 5.71 1.89 1.97 6 300 10.62 4 M12 1.75 0.75 10 UN 12 1.02 3.47 2.17 6.50 2.13 2.17 600 11.50 4 M14 2.00 1 8 UN 10 2 1.30 0.67 4.33 2.17 7.28 2.91 2.36 150 11.75 4 M12 1.75 0.75 10 UN 8 1.10 3.55 2.17 6.50 2.13 2.28 8 300 13.00 4 M14 2.00 0.875 9 UN 12 1.26 3.86 2.17 6.50 2.56 2.36 600 13.75 4 M18 2.50 1.125 8 UN 10 2 1.77 0.79 0.47 5.04 2.95 8.27 3.54 2.64 150 14.25 4 M12 1.75 0.875 9 UN 12 1.26 4.07 2.17 6.50 2.44 2.36 10 300 15.25 4 M16 2.00 1 8 UN 16 1.50 0.47 4.75 2.76 7.68 2.76 2.56 600 17.00 4 M20 2.50 1.25 8 UN 12 4 1.89 0.84 0.47 6.30 3.35 10.63 4.13 3.03 150 17.00 4 M16 2.00 0.875 9 UN 12 1.42 4.08 2.76 7.68 2.80 2.64 12 300 17.75 4 M18 2.50 1.125 8 UN 14 2 1.65 0.71 0.47 4.25 3.74 8.07 3.07 2.76 600 19.25 4 M24 3.00 1.25 8 UN 16 4 1.97 0.84 0.63 6.10 3.94 13.78 5.04 2.95 150 18.75 4 M16 2.00 1 8 UN 12 1.65 0.47 4.92 3.74 8.07 3.19 3.07 14 300 20.25 4 M20 2.50 1.125 8 UN 12 4 2.17 0.75 0.47 5.71 5.51 10.63 3.94 3.07 600 20.75 4 M24 3.00 1.375 8 UN 16 4 2.05 0.94 0.63 7.09 5.12 13.78 5.43 3.27 150 21.25 4 M18 2.50 1 8 UN 16 1.85 0.47 5.00 3.94 8.07 3.62 3.15 16 300 22.50 4 M24 3.00 1.25 8 UN 16 4 2.44 0.87 0.63 5.63 5.71 13.78 5.12 3.35 600 23.75 4 M30 3.50 1.50 8 UN 16 4 2.24 1.02 0.87 8.27 5.91 16.38 6.38 3.70 150 22.75 4 M20 2.50 1.125 8 UN 14 2 2.09 0.79 0.47 5.31 4.72 10.63 3.70 3.27 18 300 24.75 4 M24 3.00 1.25 8 UN 20 4 2.76 0.87 0.63 5.91 6.30 13.78 5.12 3.39 600 25.75 4 M30 3.50 1.625 8 UN 16 4 2.56 1.10 0.87 9.84 7.28 16.34 7.24 3.94 150 25.00 4 M20 2.50 1.125 8 UN 16 4 2.36 0.98 0.47 6.97 4.72 10.63 4.21 3.54 20 300 27.00 4 M30 3.50 1.25 8 UN 20 4 2.95 0.87 0.87 7.48 6.50 16.73 5.51 3.46 600 28.50 4 M36 4.00 1.625 8 UN 20 4 2.56 1.18 0.87 10.04 7.28 19.69 7.87 4.13 150 29.50 4 M24 3.00 1.25 8 UN 16 4 2.87 1.77 0.63 7.48 6.50 13.78 5.04 3.35 24 300 32.00 4 M30 3.50 1.50 8 UN 20 4 3.39 0.98 0.87 7.48 8.07 16.34 5.91 3.54 600 33.00 4 M36 4.00 1.875 8 UN 20 4 2.83 1.26 0.87 11.02 8.66 18.70 8.46 4.72

Lug Pattern Dimensions: 3 to 24 in per PI 609 U f9 N2 M H2 Z L3 For two keys B h9 +0.000/ 0.15 TYP N1 M H1 L2 L P S F For single key T K Section R L1 J G E X View D Y Lug Pattern Dimensions: 3 to 24 in per PI 609, SME lass 150, 300, and 600 Size, mm lass f9 B h9 +0.00/ 0.15 No. of Keys D E F G K L L1 L2 L3 80 100 150 200 250 300 350 400 450 500 600 150 21 6 13.00 1 47.00 94 12.50 25.00 48 322 109 100 114 300 21 6 13.00 1 47.00 94 12.50 25.00 48 351 119 120 113 150 21 6 13.00 1 47.00 94 12.50 25.00 54 372 128 131 114 300 21 6 13.00 1 47.00 94 12.50 25.00 54 397 142 140 116 600 26 8 16.00 1 70.00 140 13.00 26.00 64 508 192 191 125 150 25 8 15.50 1 55.00 110 12.00 24.00 57 434 149 160 125 300 30 8 19.00 1 70.00 140 13.00 26.00 59 511 180 205 126 600 36 12 23.00 1 75.00 150 17.00 34.00 78 650 242 255 153 150 32 8 19.00 1 70.00 140 13.00 26.00 64 502 180 197 125 300 38 10 23.00 2 70.00 140 17.00 34.00 73 554 209 220 125 600 46 14 28.00 2 87.50 175 22.50 45.00 102 701 263 272 166 150 36 10 22.00 1 70.00 140 17.00 34.00 71 589 223 237 129 300 40 12 24.50 2 82.50 165 20.00 40.00 83 664 246 260 158 600 55 16 33.50 2 112.50 225 27.00 54.00 117 821 300 310 211 150 42 12 25.50 1 82.50 165 20.00 40.00 81 686 252 274 160 300 46 14 28.00 2 87.50 175 22.50 45.00 92 770 282 300 188 600 65 18 39.50 2 150.00 300 40.00 80.00 140 880 337 340 203 150 45 14 28.00 2 87.50 175 22.50 45.00 92 824 286 330 208 300 55 16 33.50 2 112.50 225 27.00 54.00 117 912 320 350 242 600 75 20 45.50 2 150.00 300 40.00 80.00 155 1,012 362 378 272 150 50 16 31.00 2 87.50 175 22.50 45.00 102 896 318 365 213 300 65 18 39.50 2 150.00 300 40.00 80.00 133 1,028 354 390 284 600 85 22 51.50 2 177.50 355 45.00 90.00 178 1,158 405 420 333 150 58 18 36.00 2 112.50 225 27.00 54.00 114 977 350 395 232 300 70 20 44.00 2 150.00 300 40.00 80.00 149 1,116 385 435 296 600 95 22 56.50 2 177.50 355 45.00 90.00 200 1,290 457 470 363 150 68 18 41.00 2 112.50 225 27.00 54.00 127 1,058 384 430 244 300 78 22 48.00 2 177.50 355 45.00 90.00 159 1,238 433 475 330 600 105 22 61.50 2 203.00 406 57.50 115.00 216 1,384 487 520 377 150 78 22 48.00 2 150.00 300 40.00 80.00 154 1,230 445 490 295 300 92 22 55.00 2 177.50 355 45.00 90.00 181 1,415 492 545 378 600 130 28 81.00 2 203.00 406 57.50 115.00 232 1,504 537 565 402 ll dimensions in mm unless otherwise specified Face-to-face dimensions and tolerances per PI 609B 9

Lug Pattern Dimensions: 3 to 24 in per PI 609 U f9 N2 M H2 Z L3 B h9 For two keys +0.000/ 0.15 TYP N1 M H1 L2 L P S F For single key T K Section R L1 J G E X View D Y 10 Lug Pattern Dimensions: 3 to 24 in per PI 609, SME lass 150, 300, and 600 Size, mm lass R P S M N1 N2 H1 H2 J T U X Y Z 80 150 152.40 4 M8 1.25 0.625 11 UN 4 20 65 45 110 40 43 300 168.30 4 M8 1.25 0.75 10 UN 8 20 65 45 110 46 43 150 190.50 4 M8 1.25 0.625 11 UN 8 24 65 45 110 42 43 100 300 200.00 4 M8 1.25 0.75 10 UN 8 24 65 45 110 48 43 600 215.90 4 M12 1.75 0.875-9 UN 8 26 88 55 165 58 53 150 241.30 4 M10 1.50 0.75 10 UN 8 24 70 55 145 48 50 150 300 270.00 4 M12 1.75 0.75 10 UN 12 26 88 55 165 54 55 600 292.10 4 M14 2.00 1 8 UN 10 2 33 17.10 110 55 185 74 60 150 298.50 4 M12 1.75 0.75 10 UN 8 28 90 55 165 54 58 200 300 330.00 4 M14 2.00 0.875 9 UN 12 32 100 55 165 65 60 600 349.20 4 M18 2.50 1.125-8 UN 10 2 45 20 12 128 75 210 90 67 150 362.00 4 M12 1.75 0.875 9 UN 12 32 104 55 165 62 60 250 300 387.40 4 M16 2.00 1 8 UN 16 38 12 122 70 195 70 65 600 431.80 4 M20 2.50 1.25 8 UN 12 4 48 21.30 12 160 85 270 105 77 150 431.80 4 M16 2.00 0.875 9 UN 12 36 105 70 195 71 67 300 300 450.80 4 M18 2.50 1.125 8 UN 14 2 42 18 12 110 95 205 78 70 600 489.00 4 M24 3.00 1.25 8 UN 16 4 50 21.30 16 155 100 350 128 75 150 476.30 4 M16 2.00 1 8 UN 12 42 12 125 95 205 81 78 350 300 514.40 4 M20 2.50 1.125 8 UN 12 4 55 19 12 145 140 270 100 78 600 527.00 4 M24 3.00 1.375-8 UN 16 4 52 24 16 180 130 350 138 83 150 540.00 4 M18 2.50 1 8 UN 16 47 12 127 100 205 92 80 400 300 571.50 4 M24 3.00 1.25 8 UN 16 4 62 22 16 143 145 350 130 85 600 603.20 4 M30 3.50 1.50 8 UN 16 4 57 26 22 210 150 416 162 94 150 577.50 4 M20 2.50 1.125 8 UN 14 2 53 20 12 135 120 270 94 83 450 300 628.60 4 M24 3.00 1.25 8 UN 20 4 70 22 16 150 160 350 130 86 600 654.00 4 M30 3.50 1.625-8 UN 16 4 65 28 22 250 185 415 184 100 150 635.00 4 M20 2.50 1.125 8 UN 16 4 60 25 12 177 120 270 107 90 500 300 685.80 4 M30 3.50 1.25 8 UN 20 4 75 22 22 190 165 425 140 88 600 723.90 4 M36 4.00 1.625 8 UN 20 4 65 30 22 255 185 500 200 105 150 749.30 4 M24 3.00 1.25 8 UN 16 4 73 45 16 190 165 350 128 85 600 300 812.80 4 M30 3.50 1.50 8 UN 20 4 86 25 22 190 205 415 150 90 600 838.20 4 M36 4.00 1.875 8 UN 20 4 72 32 22 280 220 475 215 120

Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609 SME lass 150, 300, and 600 Z F f9 L3 For two keys +0.000/ 0.006 TYP N2 M H2 B h9 N1 S H1 L2 L For single key H G Y L1 J R K E T D View Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609, SME lass 150, 300, and 600 Size, in lass f9 B h9 +0.00/ 0.006 No. of Keys Flange Type E F H J K L 3 150 0.83 0.24 0.51 1 F07 6.00 1.77 2.76 0.24 4.50 12.68 300 0.83 0.24 0.51 1 F07 6.62 1.77 2.76 0.24 4.50 13.82 150 0.83 0.24 0.51 1 F07 7.50 1.77 2.76 0.24 5.00 14.65 4 300 0.83 0.24 0.51 1 F07 7.88 1.77 2.76 0.24 5.00 15.63 600 1.02 0.32 0.63 1 F12 8.50 2.17 4.92 0.39 7.48 20.00 150 0.98 0.32 0.61 1 F10 9.50 2.17 4.02 0.39 5.50 17.09 6 300 1.18 0.32 0.75 1 F12 10.62 2.17 4.92 0.39 5.50 20.12 600 1.42 0.47 0.91 1 F14 11.50 2.17 5.51 0.39 8.27 25.59 150 1.26 0.32 0.75 1 F12 11.75 2.17 4.92 0.39 6.00 19.76 8 300 1.50 0.39 0.91 2 F14 13.00 2.17 5.51 0.39 6.00 21.79 600 1.81 0.55 1.10 2 F16 13.75 2.95 6.50 0.47 9.06 27.60 150 1.42 0.39 0.87 1 F12 14.25 2.17 4.92 0.39 6.50 23.19 10 300 1.58 0.47 0.97 2 F16 15.25 2.76 6.50 0.47 6.50 26.14 600 2.17 0.63 1.32 2 F25 17.00 3.35 10.00 0.47 9.84 32.32 150 1.65 0.47 1.00 1 F14 17.00 2.76 5.51 0.39 7.00 27.01 12 300 1.81 0.55 1.10 2 F16 17.75 3.74 6.50 0.47 7.00 30.31 600 2.56 0.71 1.56 2 F30 19.25 3.94 11.73 0.63 10.63 34.65 150 1.77 0.55 1.10 2 F16 18.75 3.74 6.50 0.47 7.48 32.44 14 300 2.17 0.63 1.32 2 F25 20.25 5.51 10.00 0.47 7.48 35.91 600 2.95 0.79 1.79 2 F30 20.75 5.12 11.73 0.63 11.42 39.84 150 1.97 0.63 1.22 2 F16 21.25 3.94 6.50 0.47 8.50 35.28 16 300 2.56 0.71 1.56 2 F30 22.50 5.71 11.73 0.63 8.50 40.47 600 3.35 0.87 2.03 2 F35 23.75 5.91 14.02 0.87 12.20 45.59 150 2.28 0.71 1.42 2 F25 22.75 4.72 10.00 0.47 8.74 38.46 18 300 2.76 0.79 1.73 2 F30 24.75 6.30 11.73 0.63 8.74 43.94 600 3.74 0.87 2.22 2 F35 25.75 7.28 14.02 0.87 12.99 50.79 150 2.68 0.71 1.61 2 F25 25.00 4.72 10.00 0.47 9.02 41.65 20 300 3.07 0.87 1.89 2 F35 27.00 6.50 14.02 0.87 9.02 48.74 600 4.13 0.87 2.42 2 F40 28.50 7.28 15.98 0.87 13.78 54.49 150 3.07 0.87 1.89 2 F30 29.50 6.50 11.73 0.63 10.51 48.41 24 300 3.62 0.87 2.17 2 F35 32.00 8.07 14.02 0.87 10.51 55.71 600 5.12 1.10 3.19 2 F40 33.00 8.66 15.98 0.87 15.35 59.21 Face-to-face dimensions and tolerances per PI 609B 11

Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609 f9 +0.000/ 0.006 TYP F Z L3 For two keys N2 M H2 N1 S H1 B h9 L2 L For single key H G Y L1 J R E T D View K Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609, SME lass 150, 300, and 600 Size, in lass L1 L2 L3 N2 M H2 N1 S H1 T D G R Y Z 3 150 4.27 3.94 4.47 4 0.75 0.71 4 M8 1.25 1.34 2.71 3.54 1.70 300 4.67 4.72 4.43 4 0.75 10 UN 0.87 4 0.875 1.06 4 M8 1.25 1.34 2.71 3.54 1.70 150 5.02 5.16 4.47 4 0.625 11 UN 0.91 4 0.75 0.91 4 M8 1.25 1.34 2.71 3.54 1.70 4 300 5.57 5.51 4.55 4 0.75 10 UN 0.79 4 0.875 1.22 4 M8 1.25 1.34 2.71 3.54 1.70 600 7.56 7.52 4.92 4 0.875 9 UN 1.10 4 1.00 1.54 4 M12 1.75 1.97 3.62 5.91 2.09 150 5.87 6.30 4.92 4 0.75 10 UN 0.87 4 0.875 0.94 4 M10 1.50 1.77 3.03 4.92 1.97 6 300 7.09 8.07 4.96 4 0.75 10 UN 0.87 8 0.875 1.38 4 M12 1.75 1.97 3.62 5.91 2.17 600 9.53 10.04 6.02 4 1.00 8 UN 1.50 8 1.14 1.89 4 M16 2.00 2.56 4.53 6.89 2.36 150 7.09 7.76 4.92 4 0.75 10 UN 0.94 4 0.875 1.06 4 M12 1.75 1.97 3.70 5.91 2.28 8 300 8.21 8.66 4.92 4 0.875 9 UN 0.98 8 1 1.57 4 M16 2.00 2.20 4.13 6.89 2.36 600 10.35 10.71 6.54 4 1.125 8 UN 1.57 8 1.26 2.20 4 M20 2.50 3.15 5.04 8.27 2.64 150 8.78 9.33 5.08 4 0.875 9 UN 1.02 8 1 1.14 4 M14 2.00 2.36 4.25 5.91 2.36 10 300 9.69 10.24 6.22 4 1 8 UN 1.18 12 1.125 1.85 4 M20 2.50 2.76 4.96 8.27 2.56 600 11.81 12.20 8.31 4 1.250 8 UN 1.89 12 1.38 2.52 8 M16 2.00 3.94 6.30 11.81 3.03 150 9.92 10.79 6.30 4 0.875 9 UN 1.02 8 1 1.22 4 M16 2.00 2.56 4.53 6.89 2.64 12 300 11.10 11.81 7.40 4 1.125 8 UN 1.38 12 1.25 1.97 4 M16 2.00 2.95 4.72 8.27 2.76 600 13.27 13.39 7.99 4 1.250 8 UN 1.77 16 1.38 2.64 8 M20 2.50 4.33 6.10 13.78 2.95 150 11.26 13.00 8.19 4 1 8 UN 1.50 8 1.125 1.38 4 M20 2.50 3.15 5.43 8.27 3.07 14 300 12.60 13.78 9.53 4 1.125 8 UN 1.57 16 1.25 2.13 8 M16 2.00 3.74 6.30 11.81 3.07 600 14.25 14.88 10.71 8 1.375 8 UN 2.05 12 1.50 2.76 8 M20 2.50 5.32 7.09 13.78 3.27 150 12.52 14.37 8.39 4 1 8 UN 1.50 12 1.125 1.46 4 M20 2.50 3.23 5.51 8.27 3.15 16 300 13.94 15.35 11.18 4 1.25 8 UN 1.57 16 1.375 2.28 8 M20 2.50 3.94 6.50 13.78 3.35 600 15.94 16.54 13.11 8 1.50 8 UN 2.28 12 1.65 3.03 8 M30 3.50 5.91 8.27 16.34 3.70 150 13.78 15.55 9.13 4 1.125 8 UN 1.57 12 1.25 1.57 8 M16 2.00 3.54 5.88 11.81 3.27 18 300 15.16 17.13 11.65 4 1.25 8 UN 1.57 20 1.375 2.40 8 M20 2.50 4.13 7.09 13.78 3.39 600 17.99 18.50 14.29 8 1.625 8 UN 2.16 12 1.75 3.27 8 M30 3.50 7.09 9.84 16.34 3.94 150 15.12 16.93 9.61 4 1.125 8 UN 1.77 16 1.25 1.69 8 M16 2.00 4.13 7.28 11.81 3.54 20 300 17.05 18.70 12.99 4 1.25 8 UN 1.57 20 1.375 2.52 8 M30 3.50 7.48 5.50 16.34 3.46 600 19.17 20.47 14.84 8 1.625 8 UN 2.05 16 1.75 3.54 8 M36 4.00 7.87 10.04 18.70 4.13 150 17.50 19.29 11.61 4 1.25 8 UN 1.57 16 1.375 1.89 8 M20 2.50 7.48 5.12 13.78 3.35 24 300 19.37 21.46 14.88 4 1.500 8 UN 1.97 20 1.625 2.76 8 M30 3.50 7.48 5.91 16.34 3.54 600 21.14 22.24 15.83 8 1.875 8 UN 2.36 16 2.01 4.02 8 M36 4.00 8.47 11.02 18.70 4.72 12

Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609 Z F f9 L3 For two keys +0.000/ 0.15 TYP N2 M H2 B h9 N1 S H1 L2 L For single key H G Y L1 J R K E T D View Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609, SME lass 150, 300, and 600 Size, mm lass f9 B h9 +0.00/ 0.15 No. of Keys Flange Type E F H J K L 80 150 21 6 13.0 1 F07 152.4 45 70 6 114 322 300 21 6 13.0 1 F07 168.3 45 70 6 114 351 150 21 6 13.0 1 F07 190.5 45 70 6 127 372 100 300 21 6 13.0 1 F07 200.0 45 70 6 127 397 600 26 8 16.0 1 F12 215.9 55 125 10 190 508 150 25 8 15.5 1 F10 241.3 55 102 10 140 434 150 300 30 8 19.0 1 F12 269.9 55 125 10 140 511 600 36 12 23.0 1 F14 292.0 55 140 10 210 650 150 32 8 19.0 1 F12 298.5 55 125 10 152 502 200 300 38 10 23.0 2 F14 330.2 55 140 10 152 569 600 46 14 28.0 2 F16 349.2 75 165 12 230 701 150 36 10 22.0 1 F12 362.0 55 125 10 165 589 250 300 40 12 24.5 2 F16 387.4 70 165 12 165 664 600 55 16 33.5 2 F25 431.8 85 254 12 250 821 150 42 12 25.5 1 F14 431.8 70 140 10 178 686 300 300 46 14 28.0 2 F16 450.9 95 165 12 178 770 600 65 18 39.5 2 F30 489.0 100 298 16 270 880 150 45 14 28.0 2 F16 476.3 95 165 12 190 824 350 300 55 16 33.5 2 F25 514.4 140 254 12 190 912 600 75 20 45.5 2 F30 527.0 130 298 16 290 1,012 150 50 16 31.0 2 F16 539.8 100 165 12 216 896 400 300 65 18 39.5 2 F30 571.5 145 298 16 216 1,028 600 85 22 51.5 2 F35 603.2 150 356 22 310 1,158 150 58 18 36.0 2 F25 577.9 120 254 12 222 977 450 300 70 20 42.0 2 F30 628.8 160 298 16 222 1,116 600 95 22 56.5 2 F35 654.0 185 356 22 330 1,290 150 68 18 41.0 2 F25 635.0 120 254 16 229 1,058 500 300 78 22 48.0 2 F35 685.8 165 356 22 229 1,238 600 105 22 61.5 2 F40 723.9 185 406 22 350 1,384 150 78 22 48.0 2 F30 749.3 165 298 16 267 1,230 600 300 92 22 55.0 2 F35 812.8 205 356 22 267 1,415 600 130 28 81.0 2 F40 838.2 220 406 22 390 1,504 ll dimensions in mm unless otherwise specified Face-to-face dimensions and tolerances per PI 609B 13

Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609 Z F f9 L3 For two keys +0.000/ 0.15 TYP N2 M H2 N1 S H1 B h9 L2 L For single key H G Y L1 J R K E T D View 14 Short Pattern Dimensions: 3 to 24 in per ISO 5752/PI 609, SME lass 150, 300, and 600 Size, mm lass L1 L2 L3 N2 M H2 N1 S H1 T D G R Y Z 80 150 109 100 114 4 19 18 4 M8 1.25 34 69 90 43 300 119 120 113 4 0.75 10 UN 22 4 22 27 4 M8 1.25 34 69 90 43 150 128 131 114 4 0.625 11 UN 23 4 19 23 4 M8 1.25 34 69 90 43 100 300 142 140 116 4 0.75 10 UN 20 4 22 31 4 M8 1.25 34 69 90 43 600 192 191 125 4 0.875 9 UN 28 4 25.4 39 4 M12 1.75 50 92 150 53 150 149 160 125 4 0.750 10 UN 22 4 22 24 4 M10 1.50 45 77 125 50 150 300 180 205 126 4 0.750 10 UN 22 8 22 35 4 M12 1.75 50 92 150 55 600 242 255 153 4 1.00 8 UN 38 8 29.0 48 4 M16 2.0 65 115 175 60 150 180 197 125 4 0.750 10 UN 24 4 22 27 4 M12 1.75 50 94 150 58 200 300 209 220 140 4 0.875 9 UN 25 8 25 40 4 M16 2.00 56 105 175 60 600 263 272 166 4 1.125 8 UN 40 8 32.0 56 4 M20 2.5 80 128 210 67 150 223 237 129 4 0.875 9 UN 26 8 25 29 4 M14 2.00 60 108 150 60 250 300 246 260 158 4 1 8 UN 30 12 29 47 4 M20 2.50 70 126 210 65 600 300 310 211 4 1.250 8 UN 48 12 35.0 64 8 M16 2.0 100 160 300 77 150 252 274 160 4 0.875 9 UN 26 8 25 31 4 M16 2.00 65 115 175 67 300 300 282 300 188 4 1.125 8 UN 35 12 32 50 4 M16 2.00 75 120 210 70 600 337 340 203 4 1.250 8 UN 45 16 35.0 67 8 M20 2.5 110 155 350 75 150 286 330 208 4 1 8 UN 38 8 29 35 4 M20 2.50 80 138 210 78 350 300 320 350 242 4 1.125 8 UN 40 16 32 54 8 M16 2.00 95 160 300 78 600 362 378 272 8 1.375 8 UN 52 12 38.0 70 8 M20 2.5 135 180 350 83 150 318 365 213 4 1 8 UN 38 12 29 37 4 M20 2.50 82 140 210 80 400 300 354 390 284 4 1.25 8 UN 40 16 35 58 8 M20 2.50 100 165 350 85 600 405 420 333 8 1.50 8 UN 58 12 42.0 77 8 M30 3.5 150 210 415 94 150 350 395 232 4 1.125 8 UN 40 12 32 40 8 M16 2.00 90 150 300 83 450 300 385 435 296 4 1.25 8 UN 40 20 35 61 8 M20 2.50 105 180 350 86 600 457 470 363 8 1.625 8 UN 55 12 44.5 83 8 M30 3.5 180 250 415 100 150 384 430 244 4 1.125 8 UN 45 16 32 43 8 M16 2.00 105 185 300 90 500 300 433 475 330 4 1.25 8 UN 40 20 35 64 8 M30 3.50 190 140 415 88 600 487 520 377 8 1.625 8 UN 52 16 44.5 90 8 M36 4.0 200 255 475 105 150 445 490 295 4 1.25 8 UN 40 16 35 48 8 M20 2.50 190 130 350 85 600 300 492 545 378 4 1.50 8 UN 50 20 41.50 70 8 M30 3.50 190 150 415 90 600 537 565 402 8 1.875 8 UN 60 16 51.0 102 8 M36 4.0 215 280 475 120

Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609 SME lass 150 and 300 f9 +0.000/ 0.006 TYP F L3 For two keys Z B h9 N2 S H L2 L For single key H G Y L1 R E J K T D View Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609, SME lass 150 and 300 Size, in lass f9 B h9 +0.00/ 0.006 No. of Keys Flange Type E F H J K L 3 150 0.827 0.236 0.512 1 F07 6.00 1.77 2.756 0.2362 8.00 12.68 300 0.827 0.236 0.512 1 F07 6.62 1.77 2.756 0.2362 11.12 13.82 4 150 0.827 0.236 0.512 1 F07 7.50 1.77 2.756 0.2362 9.00 14.65 300 0.827 0.236 0.512 1 F07 7.88 1.77 2.756 0.2362 12.00 15.63 6 150 0.984 0.315 0.610 1 F10 9.50 2.17 4.016 0.3937 10.50 17.09 300 1.181 0.315 0.748 1 F12 10.62 2.17 4.921 0.3937 15.88 20.12 8 150 1.260 0.315 0.748 1 F12 11.75 2.17 4.921 0.3937 11.50 19.76 300 1.496 0.394 0.906 2 F14 13.00 2.17 5.512 0.3937 16.50 21.79 10 150 1.417 0.394 0.866 1 F12 14.25 2.17 4.921 0.3937 13.00 23.19 300 1.575 0.472 0.965 2 F16 15.25 2.76 6.496 0.4724 18.00 26.14 12 150 1.654 0.472 1.004 1 F14 17.00 2.76 5.512 0.3937 14.00 27.01 300 1.811 0.551 1.102 2 F16 17.75 3.74 6.496 0.4724 19.75 30.31 14 150 1.772 0.551 1.102 2 F16 18.75 3.74 6.496 0.4724 15.00 32.44 300 2.165 0.630 1.319 2 F25 20.25 5.51 10.000 0.4724 30.00 35.91 16 150 1.969 0.630 1.220 2 F16 21.25 3.94 6.496 0.4724 16.00 35.28 300 2.559 0.709 1.555 2 F30 22.50 5.71 11.732 0.6299 33.00 40.47 18 150 2.283 0.709 1.417 2 F25 22.75 4.72 10.000 0.4724 17.00 38.46 300 2.756 0.787 1.732 2 F30 24.75 6.30 11.732 0.6299 36.00 43.94 20 150 2.677 0.709 1.614 2 F25 25.00 4.72 10.000 0.4724 18.00 41.65 300 3.071 0.866 1.890 2 F35 27.00 6.50 14.016 0.8661 39.00 48.74 24 150 3.071 0.866 1.890 2 F30 29.50 6.50 11.732 0.6299 20.00 48.41 300 3.622 0.866 2.165 2 F35 32.00 8.07 14.016 0.8661 45.00 55.71 SME lass 600 dimensions upon request Face-to-face dimensions and tolerances per PI 609B 15

Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609 f9 +0.000/ 0.006 TYP F L3 For two keys Z B h9 N S H L2 L For single key H G Y L1 R E J K T D View Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609, SME lass 150 and 300 Size, in lass L1 L2 L3 N S H T D G R Y Z 150 4.27 3.94 4.47 4 0.750 0.71 4 M8 1.25 1.34 2.71 3.54 1.70 3 300 4.67 4.72 4.43 8 0.875 1.06 4 M8 1.25 1.34 2.71 3.54 1.70 4 6 8 10 12 14 16 18 20 24 150 5.02 5.16 4.47 8 0.750 0.91 4 M8 1.25 1.34 2.71 3.54 1.70 300 5.57 5.51 4.55 8 0.875 1.22 4 M8 1.25 1.34 2.71 3.54 1.70 150 5.87 6.30 4.92 8 0.875 0.94 4 M10 1.50 1.77 3.03 4.92 1.97 300 7.09 8.07 4.96 12 0.875 1.38 4 M12 1.75 1.97 3.62 5.91 2.17 150 7.09 7.76 4.92 8 0.875 1.06 4 M12 1.75 1.97 3.70 5.91 2.28 300 8.21 8.66 4.92 12 1.000 1.57 4 M16 2.00 2.20 4.13 6.89 2.36 150 8.78 9.33 5.08 12 1.000 1.14 4 M14 2.00 2.36 4.25 5.91 2.36 300 9.69 10.24 6.22 16 1.125 1.85 4 M20 2.50 2.76 4.96 8.27 2.56 150 9.92 10.79 6.30 12 1.000 1.22 4 M16 2.00 2.56 4.53 6.89 2.64 300 11.10 11.81 7.40 16 1.250 1.97 4 M16 2.00 2.95 4.72 8.27 2.76 150 11.26 12.99 8.19 12 1.125 1.38 4 M20 2.50 3.15 5.43 8.27 3.07 300 12.60 13.78 9.53 20 1.250 2.13 8 M16 2.00 3.74 6.30 11.81 3.07 150 12.52 14.37 8.39 16 1.125 1.46 4 M20 2.50 3.23 5.51 8.27 3.15 300 13.94 15.35 11.18 20 1.375 2.28 8 M20 2.50 3.94 6.50 13.78 3.35 150 13.78 15.55 9.13 16 1.250 1.57 8 M16 2.00 3.54 5.91 11.81 3.27 300 15.16 17.13 11.65 24 1.375 2.40 8 M20 2.50 4.13 7.09 13.78 3.39 150 15.12 16.93 9.61 20 1.250 1.69 8 M16 2.00 4.13 7.09 11.81 3.54 300 17.05 18.70 12.99 24 1.375 2.52 8 M30 3.50 7.48 5.51 16.34 3.46 150 17.50 19.29 11.61 20 1.375 1.89 8 M20 2.50 7.48 5.12 13.78 3.35 300 19.37 21.46 14.88 24 1.625 2.76 8 M30 3.50 7.48 5.91 16.34 3.54 SME lass 600 dimensions upon request 16

Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609 f9 +0.000/ 0.15 TYP F L3 For two keys Z B h9 N S H L2 L For single key H G Y L1 R E J K T D View Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609, SME lass 150 and 300 Size, mm lass f9 B h9 +0.00/ 0.15 No. of Keys Flange type E F H J K L 80 150 21.00 6.00 13.00 1 F07 152.4 45.00 70.00 6.000 203.00 322.0 300 21.00 6.00 13.00 1 F07 168.3 45.00 70.00 6.000 282.00 351.0 100 150 21.00 6.00 13.00 1 F07 190.5 45.00 70.00 6.000 229.00 372.0 300 21.00 6.00 13.00 1 F07 200.0 45.00 70.00 6.000 305.00 397.0 150 150 25.00 8.00 15.50 1 F10 241.3 55.00 102.00 10.000 267.00 434.0 300 30.00 8.00 19.00 1 F12 269.9 55.00 125.00 10.000 403.00 511.0 200 150 32.00 8.00 19.00 1 F12 298.5 55.00 125.00 10.000 292.00 502.0 300 38.00 10.00 23.00 2 F14 330.2 55.00 140.00 10.000 418.00 553.5 250 150 36.00 10.00 22.00 1 F12 362.0 55.00 125.00 10.000 330.00 589.0 300 40.00 12.00 24.50 2 F16 387.4 70.00 165.00 12.000 457.00 664.0 300 150 42.00 12.00 25.50 1 F14 431.8 70.00 140.00 10.000 356.00 686.0 300 46.00 14.00 28.00 2 F16 450.9 95.00 165.00 12.000 502.00 770.0 350 150 45.00 14.00 28.00 2 F16 476.3 95.00 165.00 12.000 381.00 824.0 300 55.00 16.00 33.50 2 F25 514.4 140.00 254.00 12.000 762.00 912.0 400 150 50.00 16.00 31.00 2 F16 539.8 100.00 165.00 12.000 406.00 896.0 300 65.00 18.00 39.50 2 F30 571.5 145.00 298.00 16.000 838.00 1,028.0 450 150 58.00 18.00 36.00 2 F25 577.9 120.00 254.00 12.000 432.00 977.0 300 70.00 20.00 44.00 2 F30 628.6 160.00 298.00 16.000 914.00 1,116.0 500 150 68.00 18.00 41.00 2 F25 635.0 120.00 254.00 12.000 457.00 1,058.0 300 78.00 22.00 48.00 2 F35 685.8 165.00 356.00 22.000 991.00 1,238.0 600 150 78.00 22.00 48.00 2 F30 749.3 165.00 298.00 16.000 508.00 1,229.5 300 92.00 22.00 55.00 2 F35 812.8 205.00 356.00 22.000 1,143.00 1,415.0 ll dimensions in mm unless otherwise specified SME lass 600 dimensions upon request Face-to-face dimensions and tolerances per PI 609B 17

Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609 f9 +0.000/ 0.15 TYP F L3 For two keys Z B h9 N S H L2 L For single key H G Y L1 R E J K T D View Long Pattern Dimensions: 3 to 24 in per SME B16.10 and PI 609, SME lass 150 and 300 Size, mm lass L1 L2 L3 N S H T D G R Y Z 150 108.5 100.0 113.5 4 19 18 4 M8 1.25 34.0 69.0 90.0 43.0 80 300 118.5 120.0 112.5 8 22 27 4 M8 1.25 34.0 69.0 90.0 43.0 100 150 200 250 300 350 400 450 500 600 150 127.5 131.0 113.5 8 19 23 4 M8 1.25 34.0 69.0 90.0 43.0 300 141.5 140.0 115.5 8 22 31 4 M8 1.25 34.0 69.0 90.0 43.0 150 149.0 160.0 125.0 8 22 24 4 M10 1.50 45.0 77.0 125.0 50.0 300 180.0 205.0 126.0 12 22 35 4 M12 1.75 50.0 92.0 150.0 55.0 150 180.0 197.0 125.0 8 22 27 4 M12 1.75 50.0 94.0 150.0 58.0 300 208.5 220.0 125.0 12 25 40 4 M16 2.00 56.0 105.0 175.0 60.0 150 223.0 237.0 129.0 12 25 29 4 M14 2.00 60.0 108.0 150.0 60.0 300 246.0 260.0 158.0 16 29 47 4 M20 2.50 70.0 126.0 210.0 65.0 150 252.0 274.0 160.0 12 25 31 4 M16 2.00 65.0 115.0 175.0 67.0 300 282.0 300.0 188.0 16 32 50 4 M16 2.00 75.0 120.0 210.0 70.0 150 286.0 330.0 208.0 12 29 35 4 M20 2.50 80.0 138.0 210.0 78.0 300 320.0 350.0 242.0 20 32 54 8 M16 2.00 95.0 160.0 300.0 78.0 150 318.0 365.0 213.0 16 29 37 4 M20 2.50 82.0 140.0 210.0 80.0 300 354.0 390.0 284.0 20 35 58 8 M20 2.50 100.0 165.0 350.0 85.0 150 350.0 395.0 232.0 16 32 40 8 M16 2.00 90.0 150.0 300.0 83.0 300 385.0 435.0 296.0 24 35 61 8 M20 2.50 105.0 180.0 350.0 86.0 150 384.0 430.0 244.0 20 32 43 8 M16 2.00 105.0 180.0 300.0 90.0 300 433.0 475.0 330.0 24 35 64 8 M30 3.50 190.0 140.0 415.0 88.0 150 444.5 490.0 295.0 20 35 48 8 M20 2.50 190.0 130.0 350.0 85.0 300 492.0 545.0 378.0 24 42 70 8 M30 3.50 190.0 150.0 415.0 90.0 SME lass 600 dimensions upon request 18

Gear Operator Dimensions j k c 45 m B D d e f h i T a b g In closed position Gear Dimensions Valve Size, in [mm] 3 [80] 4 [100] 6 [150] 8 [200] 10 [250] 12 [300] 14 [350] 16 [400] 18 [450] 20 [500] 24 [600] SME lass Model d, in [mm] e, in [mm] c, in [mm] g, mm B, in [mm] T, in [mm] D, in [mm] 150 GB-BF 2.17 [55] 2.76 [70] 0.08 [2] 4-M8 12 0.24 [6] 0.52 [13.3] 0.83 [21] 300 GB-BF 2.17 [55] 2.76 [70] 0.08 [2] 4-M8 13 0.24 [6] 0.52 [13.3] 0.83 [21] 150 GB-BF 2.17 [55] 2.76 [70] 0.08 [2] 4-M8 14 0.24 [6] 0.52 [13.3] 0.83 [21] 300 GB-00 2.17 [55] 2.76 [70] 0.08 [2] 4-M8 12 0.24 [6] 0.52 [13.3] 0.83 [21] 600 GB-01-1S 3.35 [85] 4.92 [125] 0.08 [2] 4-M12 18 0.31 [8] 0.64 [16.3] 1.02 [26] 150 GB-00 2.76 [70] 4.02 [102] 0.08 [2] 4-M10 15 0.32 [8] 0.62[15.8] 0.98 [25] 300 GB-01 3.35 [85] 4.92 [125] 0.08 [2] 4-M12 18 0.32 [8] 0.76 [19.3] 1.18 [30] 600 GB-02-1S 3.94 [100] 5.51 [140] 0.08 [2] 4-M16 24 0.47 [12] 0.92 [23.3] 1.42 [36] 150 GB-0 3.35 [85] 4.92 [125] 0.08 [2] 4-M12 18 0.32 [8] 0.76 [19.3] 1.26 [32] 300 GB-02 3.94 [100] 5.51 [140] 0.08 [2] 4-M16 24 0.39 [10] 0.92 [23.3] 1.50 [30] 600 GB-04-1SD 6.50 [165] 4-M20 30 0.55 [14] 1.13 [28.8] 1.81 [46] 150 GB-01 3.35 [85] 4.92 [125] 0.08 [2] 4-M12 18 0.39 [10] 0.88 [22.3] 1.42 [36] 300 GB-03-1S 5.12 [130] 6.50 [165] 0.08 [2] 4-M20 25 0.47 [12] 0.98 [24.8] 1.58 [40] 600 B38 7.87 [200] 10.00 [254] 0.16 [4] 8-M16 24 0.63 [16] 1.33 [33.8] 2.17 [55] 150 GB-02 3.94 [100] 5.51 [140] 0.08 [2] 4-M16 24 0.47 [12] 1.02 [25.8] 1.65 [42] 300 GB-04-1S 5.12 [130] 6.50 [135] 0.08 [2] 4-M20 25 0.55 [14] 1.11 [28.3] 1.81 [46] 600 B48 9.06 [230] 11.73 [298] 0.16 [4] 8-M20 30 0.71 [18] 1.57 [39.9] 2.56 [65] 150 GB-02-1S 5.12 [130] 6.50 [165] 0.08 [2] 4-M20 25 0.55 [14] 1.11 [28.3] 1.77 [45] 300 B38 7.78 [200] 10 [254] 0.16 [4] 8-M16 24 0.63 [16] 1.33 [33.8] 2.17 [55] 600 B48 9.06 [230] 11.73 [298] 0.16 [4] 8-M20 30 0.79 [20] 1.81 [45.9] 2.95 [75] 150 GB-03-1S 5.12 [130] 6.50 [165] 0.08 [2] 4-M20 25 0.63 [16] 1.23 [31.3] 1.97 [50] 300 B48 9.06 [230] 11.73 [298] 0.16 [4] 8-M20 30 0.71 [18] 1.57 [39.9] 2.56 [65] 600 B58 10.24 [260] 14.02 [356] 0.20 [5] 8-M30 45 0.87 [22] 2.04 [51.9] 3.35 [85] 150 GB-04-1S 7.87 [200] 10.00 [254] 0.12 [3] 8-M16 24 0.71 [18] 1.43 [36.4] 2.28 [58] 300 B48 9.06 [230] 11.73 [298] 0.16 [4] 8-M20 30 0.79 [3] 1.75 [44.4] 2.76 [70] 600 B58+1S02 10.24 [260] 14.02 [356] 0.20 [5] 8-M30 45 0.87 [22] 2.24 [56.9] 3.74 [95] 150 B38 7.78 [200] 10.00 [254] 0.16 [4] 8-M16 24 0.71 [18] 1.63 [41.4] 2.68 [68] 300 B48 10.24 [260] 14.02 [356] 0.16 [4] 8-M30 38 0.87 [22] 1.91 [48.4] 3.07 [78] 600 GB-09-1SD+1S02 11.81 [300] 15.98 [406] 0.24 [6] 8-M36 54 0.87 [22] 2.44 [61.9] 4.13 [105] 150 B48 9.06 [230] 11.73 [298] 0.16 [4] 8-M20 30 0.87 [22] 1.91 [48.4] 3.07 [78] 300 B58 10.24 [260] 14.02 [356] 0.16 [4] 8-M30 38 0.87 [22] 2.18 [55.4] 3.62 [92] 600 GB-09-1SD+1S02 11.81 [300] 15.98 [406] 0.24 [6] 8-M36 54 1.10 [28] 3.20 [81.4] 5.12 [130] 19

Gear Operator Dimensions j k c 45 m B D d e f h i T a b g In closed position 20 Gear Dimensions Valve Size, in [mm] SME lass a, in [mm] b, in [mm] f, in [mm] h, in [mm] i, in [mm] j, in [mm] k, in [mm] m, in [mm] 3 [80] 150 1.81 [46] 1.10 [28] 3.54 [90] 4.45 [113] 1.58 [40] 2.09 [53] 3.58 [91] 6 [152] 300 1.81 [46] 1.10 [28] 3.54 [90] 4.45 [113] 1.58 [40] 2.09 [53] 3.58 [91] 8 [203] 150 1.81 [46] 1.10 [28] 3.54 [90] 4.45 [113] 1.58 [40] 2.09 [53] 3.58 [91] 6 [152] 4 [100] 300 2.87 [73] 1.30 [33] 4.92 [125] 5.91 [150] 2.17 [55] 2.80 [71] 4.06 [103] 12 [305] 600 3.66 [93] 1.89 [48] 6.89 [175] 8.86 [225] 2.95 [75] 3.66 [93] 6.73 [171] 14 [350] 150 2.87 [73] 1.30 [33] 4.92 [125] 5.91 [150] 2.17 [55] 2.80 [71] 4.06 [103] 10 [254] 6 [150] 300 3.82 [97] 1.89 [48] 6.89 [175] 7.99 [203] 2.95 [75] 3.66 [93] 5.71 [145] 20 [508] 600 4.33 [110] 2.52 [64] 8.27 [210] 11.26 [286] 3.62 [92] 4.45 [113] 8.07 [205] 18 [450] 150 3.70 [94] 1.89 [48] 5.91 [150] 7.13 [181] 2.60 [66] 3.27 [83] 5.28 [134] 16 [406] 8 [200] 300 4.49 [114] 2.52 [64] 8.27 [210] 9.65 [245] 3.62 [92] 4.45 [113] 7.64 [194] 34 [864] 600 4.88 [124] 2.48 [63] 11.81 [300] 15.31 [389] 5.67 [144] 6.22 [158] 11.30 [287] 26 [650] 150 3.82 [97] 1.89 [48] 6.89 [175] 7.99 [203] 2.95 [75] 3.66 [93] 5.71 [145] 24 [610] 10 [250] 300 4.50 [115] 2.28 [58] 9.84 [250] 12.80 [325] 4.37 [111] 4.92 [125] 8.54 [217] 22 [559] 600 5.79 [147] 3.03 [77] 13.78 [350] 16.69 [424] 5.98 [152] 6.26 [159] 10.91 [277] 28 [700] 150 4.49 [114] 2.52 [64] 8.27 [210] 9.65 [245] 3.62 [92] 4.45 [113] 7.64 [194] 28 [711] 12 [300] 300 5.04 [128] 2.48 [63] 11.81 [300] 15.08 [383] 5.67 [144] 6.22 [158] 9.69 [246] 34 [864] 600 6.50 [165] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 15.04 [382] 28 [700] 150 4.49 [114] 2.52 [64] 8.27 [210] 11.26 [286] 3.62 [92] 4.45 [113] 8.07 [205] 24 [610] 14 [350] 300 5.91 [150] 3.03 [77] 13.78 [350] 16.69 [424] 5.98 [152] 6.26 [159] 10.71 [272] 30 [762] 600 6.50 [165] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 15.04 [382] 33 [850] 150 4.50 [115] 2.28 [58] 9.84 [250] 12.80 [325] 4.37 [111] 4.92 [125] 8.54 [217] 26 [660] 16 [400] 300 6.69 [170] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 14.84 [377] 24 [610] 600 7.91 [201] 3.98 [101] 18.70 [475] 26.18 [665] 10.63 [270] 10.98 [279] 17.91 [455] 30 [750] 150 5.04 [128] 2.48 [63] 11.81 [300] 15.08 [383] 5.67 [144] 6.22 [158] 9.69 [246] 34 [864] 18 [450] 300 6.69 [170] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 14.84 [377] 32 [813] 600 7.91 [201] 3.98 [101] 18.70 [475] 26.18 [665] 10.63 [270] 10.98 [279] 21.14 [537] 30 [750] 150 5.91 [150] 3.03 [77] 13.78 [350] 16.69 [424] 5.98 [152] 6.26 [159] 10.71 [272] 26 [660] 20 [500] 300 6.69 [170] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 14.84 [377] 40 [1,016] 600 9.21 [234] 5.08 [129] 22.05 [560] 30.43 [773] 13.19 [335] 13.19 [335] 23.31 [592] 24 [600] 150 6.69 [170] 3.43 [87] 16.34 [415] 21.42 [544] 9.09 [231] 8.39 [213] 14.84 [377] 22 [559] 24 [600] 300 8.07 [205] 3.98 [101] 18.70 [475] 26.18 [665] 10.63 [270] 10.98 [279] 17.52 [445] 36 [914] 600 9.21 [234] 5.08 [129] 22.05 [560] 30.43 [773] 13.19 [335] 13.19 [335] 23.31 [592] 35 [900]

Pressure and Temperature Ratings (SME B16.34) Temperature, degf [deg] SME 150 SME 300 SME 600 arbon Steel Stainless Steel arbon Steel Stainless Steel arbon Steel Stainless Steel 20 to 100 [ 29 to 38] 285 275 740 720 1,480 1,440 200 [93] 260 240 675 620 1,350 1,240 300 [149] 230 215 655 560 1,315 1,120 400 [204] 200 195 635 515 1,270 1,030 500 [260] 170 170 600 480 1,200 955 600 [316] 140 140 550 450 1,095 905 650 [343] 125 125 535 445 1,075 890 700 [371] 110 110 535 430 1,065 865 750 [399] 95 95 505 425 1,010 845 800 [427] 80 80 410 415 825 830 850 [454] 65 65 270 405 535 810 900 [482] 50 50 170 395 345 790 950 [510] 35 35 105 385 205 775 1,000 [538] 20 20 50 365 105 725 1,100 [593] 20 305 610 1,150 [621] 20 235 472 1,200 [649] 20 185 370 1,250 [677] 20 145 295 1,300 [704] 20 115 235 1,350 [732] 20 95 190 1,400 [760] 20 75 150 1,450 [788] 20 60 115 1,500 [816] 15 40 85 Low-temperature gas test per PI 598 for services below 20 degf [ 29 deg] (316SS and PTFE seals) WB permissible, but not recommended for prolonged use above 800 degf [427 deg] bove 800 degf [427 deg] stainless steel body valves, stem material to be determined Flanged-end valve ratings terminate at 1,000 degf [538 deg] for SME lass 150 Weights Weight, lbm [kg] Valve Only Bare Stem and Bracket Lug Pattern ISO Short Pattern Long Pattern Size, in [mm] SME lass SME lass SME lass 150 300 600 150 300 600 150 300 3 [80] 20 [9] 27 [11] 34 [16] 46 [21] 37 [17] 53 [24] 4 [100] 30 [14] 34 [16] 61 [28] 47 [22] 67 [31] 129 [59] 51 [23] 80 [36] 6 [150] 48 [22] 67 [30] 126 [57] 79 [36] 123 [56] 233 [106] 82 [37] 153 [70] 8 [200] 78 [36] 112 [51] 213 [96] 124 [56] 182 [83] 373 [169] 131 [60] 223 [101] 10 [250] 127 [58] 184 [84] 393 [178] 184 [84] 281 [128] 591 [268] 198 [90] 350 [159] 12 [300] 199 [91] 270 [123] 573 [260] 270 [123] 392 [178] 787 [357] 294 [133] 497 [226] 14 [350] 271 [123] 482 [219] 712 [323] 373 [169] 591 [269] 988 [448] 392 [178] 813 [369] 16 [400] 367 [167] 690 [313] 1,068 [484] 477 [217] 816 [370] 1,414 [641] 528 [240] 1,116 [506] 18 [450] 522 [237] 870 [395] 1,388 [630] 646 [293] 1,020 [463] 1,797 [815] 680 [309] 1,402 [636] 20 [500] 699 [317] 1,127 [512] 1,817 [824] 819 [372] 1,310 [595] 2,329 [1,057] 892 [405] 1,871 [849] 24 [600] 1,060 [481] 1,670 [758] 2,457 [1,114] 1,211 [550] 1,906 [865] 3,194 [1,449] 1,317 [598] 2,781 [1,262] 21

v vs. Disc ngle The flow coefficient, or v value, is used to describe the inherent flow capacity of a valve. This v value is defined as the number of us gallons of water/min at standard conditions (60 degf and 14.7 absolute psi) that will flow through a valve at a constant 1.0-psi pressure drop. The capacity of the valve with other fluids at various flowing conditions can be calculated using this basic v value. The following tables indicate the v values at various disc angles of opening. SME lass 150 Valve Sizing oefficient ( v ) Valve Size, in Disc Position, 90 80 70 60 50 40 30 20 10 3 103 101 83 66 50 34 21 9 4 4 301 295 241 193 144 99 60 27 12 6 673 660 539 431 323 222 135 61 27 8 1,549 1,518 1,239 991 743 511 310 139 62 10 2,224 2,180 1,779 1,423 1,068 734 445 200 89 12 3,312 3,246 2,650 2,120 1,590 1,093 662 298 132 14 5,745 5,630 4,596 3,677 2,758 1,896 1,149 517 230 16 8,093 7,931 6,474 5,179 3,884 2,671 1,619 728 324 18 11,597 11,365 9,278 7,422 5,567 3,827 2,319 1,044 464 20 14,682 14,388 11,745 9,396 7,047 4,845 2,936 1,321 587 24 20,739 20,324 16,591 13,273 9,955 6,844 4,148 1,866 830 SME lass 300 Valve Sizing oefficient ( v ) Valve Size, in Disc Position, 90 80 70 60 50 40 30 20 10 3 104 102 83 66 50 34 21 9 4 4 301 295 241 193 144 99 60 27 12 6 618 605 497 395 299 205 123 54 22 8 1,406 1,378 1,125 900 675 464 281 127 56 10 2,092 2,051 1,674 1,339 1,004 690 418 188 84 12 3,117 3,055 2,494 1,995 1,496 1,029 623 281 125 14 5,006 4,906 4,005 3,204 2,403 1,652 1,001 451 200 16 7,523 7,372 6,018 4,815 3,611 2,482 1,505 677 301 18 10,368 10,160 8,294 6,635 4,976 3,421 2,074 933 415 20 13,340 13,073 10,672 8,538 6,403 4,402 2,668 1,201 534 24 19,520 19,130 15,616 12,493 9,370 6,442 3,904 1,757 781 SME lass 600 Valve Sizing oefficient ( v ) Valve Size, in Disc Position, 90 80 70 60 50 40 30 20 10 4 139 136 111 89 67 46 28 13 6 6 426 605 497 395 299 205 123 54 22 8 926 908 741 593 445 306 185 83 37 10 1,488 1,458 1,190 952 714 491 298 134 60 12 2,068 2,027 1,655 1,324 993 683 414 186 83 14 2,438 2,389 1,950 1,560 1,170 804 488 219 98 16 3,337 3,270 2,669 2,136 1,602 1,101 667 300 133 18 3,898 3,820 3,118 2,494 1,871 1,286 780 351 156 20 5,112 5,009 4,089 3,271 2,454 1,687 1,022 460 204 24 8,501 8,331 6,801 5,441 4,081 2,805 1,700 765 340 22

How to Order Figure number The figure number shown below identifies specific valve configuration details of TOVs, such as valve type, pressure class, end connections, body and bonnet and trim materials, and special features. Please specify end connections, body materials, and trims not listed below. When placing an order, refer to the respective product section of the catalog for size availability. detailed description must be included with any special orders. dditional details for nonstandard materials must be specified in the order. 91F-BN-N-FS-WGO Type 9 Triple offset lass 1 150 3 300 6 600 Fire-Safe FS Fire-safe PI 607 End onnections F Double flanged (long pattern to B16.10) P Lug Q ISO 5752 double flange (short pattern) Z Wafer W Butt weld NE N NE MR0175/NE MR0103 Body Material 20 STM 351, N7M... ast alloy 20 B STM 216, WB... ast carbon steel F3 STM 351, F3... ast 304l stainless steel 3M STM 351, F3M... ast 316l stainless steel F8 STM 351, F8... ast 304 stainless steel 8M STM 351, F8M... ast 316 stainless steel L STM 352, L... ast low-temperature carbon steel LB STM 352, LB... ast low-temperature carbon steel M STM 414, M35... ast nickel copper (MONEL ) H STM 494, W 12MW... HSTELLOY 276 NB STM B148 95,800... Nickel aluminum bronze (NB) SPL Special (customer specified) DUP Duplex SD Super duplex Disc, Stem, and Seat Material N arbon steel/17-4ph condition H1150D/duplex graphite I 316 SS/17-4PH condition H1150D/duplex graphite S 304 SS/17-4PH condition H1150D/duplex graphite 7 arbon steel/inonel 718/duplex graphite M 316 SS/INONEL 718/duplex graphite 5 MONEL/MONEL/MONEL graphite HSTELLOY 276/H/H graphite NB/NB/NB graphite L Special (customer specified disc, stem, seal ring) D Duplex/super duplex Suffix Letters BS Bare stem W hainwheel EB Extended body WGO Worm gear operated HO Hydraulic operator LV Live-load packing MO Motor operated PO Pneumatic operator SPL Special (customer specified) EXT Extended stem (customer specified) 23

WKM Valves Triple Offset Valves cameron.slb.com/wkmtov *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. opyright 2018 Schlumberger. ll rights reserved. 18-VL-383237