ANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016

Similar documents
June Multilayer Low Pass Filter. For MHz DEA162500LT-1217A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

July Multilayer Band Pass Filter. For MHz DEA162450BT-1210A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

June Multilayer Low Pass Filter. For MHz DEA163800LT-5017C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

June Multilayer Band Pass Filter. For MHz DEA162450BT-1260B2. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

June Multilayer Band Pass Filter. For MHz DEA203600BT-1240B2. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]

January Multilayer Low Pass Filter. For MHz DEA101990LT-6302B1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]

June Multilayer Low Pass Filter. For MHz DEA160960LT-5044C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

April Multilayer Phase Shifter (Delay Line) For MHz DEA101910DT-6016A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]

April Multilayer Directional Coupler. For MHz HHM2220SA3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

October Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS

October Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS

December Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]

November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]

February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]

November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]

February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]

February Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]

Chip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]

Chip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]

MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015

MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015

September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]

July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]

VLS-E series. Inductors for Power Circuits. Wound Ferrite

October Isolator. Drop-in. CU1L2581 Series

MULTILAYER CERAMIC CHIP CAPACITORS

MULTILAYER CERAMIC CHIP CAPACITORS

CAPACITORS. February Ultra high voltage ceramic capacitors. With metal terminals For high voltage power supplies/lasers.

MULTILAYER CERAMIC CHIP CAPACITORS

MULTILAYER CERAMIC CHIP CAPACITORS

CAPACITORS. February Ultra high voltage ceramic capacitors. With metal terminals For distribution lines. FD/MD series

MULTILAYER CERAMIC CHIP CAPACITORS

AML series. Caution. Choke coil for DC motors EMC. Products in this catalog are in preparation for mass production.

July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]

Inductors for High-frequency Circuits

SPECIFICATION. Part No. : GW

Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF

Specification Status: Released

Specification Status: Released

CUSTOMER'S PRODUCT NAME TDK PRODUCT NAME 3-terminal Feed Through Filter Tape packaging RoHS compliant YFF15,YFF18,YFF21,YFF31 Type

GAS DISCHARGE TUBES (GDTS)

SolidMatrix 1206 Fast Acting Surface Mount Fuses

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

WLCW1608 SMD Wire Wound Ceramic Chip Inductors

Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).

Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.

Applications. Car audio. Robo

Notice for TAIYO YUDEN Products

Multi-Layer Power Inductors (IP_L Series)

Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *

Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18

Wirewound Chip Inductors

Surface Mount Aluminum Electrolytic Capacitors

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

Surface Mount Aluminum Electrolytic Capacitors

Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.

High Frequency Winding Type LQW15A/LQW18A Series. Rated Current (ma)

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

Power Splitter/Combiner

MHz Filter

G6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information

Notice for TAIYO YUDEN Products

Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T

Surface Mount Aluminum Electrolytic Capacitors NACEW Series

Shock Sensor Specification. Part No. : PSLE382E-R44. RoHS Compliant. Halogen-Free Compliant. 16.Dec KYOCERA CORPORATION

Fixed Inductors (Chip Inductors) 2. High Frequency Use High-Q (Non Magnetic Core) QF, QE

Thin-Film Directional Couplers

Approval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF

Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:

SPECIFICATION FOR APPROVAL

Metal Oxide Varistor:TVM-B Series

YAGEO CORPORATION Lead-Free & RoHs Compliance!!

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955

Multilayer Chip Inductor-CL Series

Ratings 0402 inch size : Type ERBRD ERBRD R X 0R25 0R3 0R37 0R50 0R75 R00 R25 R50 2R00 2R50 3R00 Rated Current (A)

RF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit

Gas Discharge Tubes SL1002A Series

Notice for TAIYO YUDEN Products

74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern

Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series

Tactile Switch. Ordering Information. A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force.

Reference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)

INPAQ. Specification. MCB & MHC W Series. Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516

Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler

CHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES

Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series

Multilayer Acrylic Polymer Film Capacitors

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B

Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T

GHz Standard Performance Dual Pole Parabolic Reflector Antenna

SMD B 15-22/R6G6C-A32/2T

15-22/R6G6C-A32/2T SMD B

Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:

17-223/R6G6C-D30/3C SMD B

Reference Only. Spec No. JELF243C-0023D-01. This reference specification applies to LQP02HQ series, Chip coil (Chip Inductors).

Surface Mount Aluminum Electrolytic Capacitors

Transcription:

R F C o m p o n e n t s September 216 Multilayer Antenna (Triple Band type) For 1574-1577MHz / 24-2484MHz / 515-585MHz ANT252LCT1575MA1 2.5x2.mm [EIA 18]* * Dimensions Code JIS[EIA]

Multilayer Antenna (Triple Band type) For 1574-1577MHz / 24-2484MHz / 515-585MHz Conformity to RoHS Directive ANT252LCT1575MA1 SHAPES AND DIMENSIONS [Top view] 2.5±.2 (4).6±.1 (1) (3) 2.±.2 (2) Marking [Bottom view] (.21).52±.2 (.21).74±.2 Terminal functions 1 Radiator electrode for GPS 2 Radiator electrode for 5.5GHz 3 Feed point 4 Radiator electrode for 2.4GHz Dimensions in mm RECOMMENDED LAND PATTERN 3.7 2.3 SOLDER RESIST PATTERN 3.7 2..6 1.4 3.1.6 1.4 3.1 1.9 Dimensions in mm 1.9 Dimensions in mm RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 EVALUATION BOARD Mt Common Ft 5.5GHz ANT252LCT1575MA1 Ft GPS PCB size : 13mm x 75mm x 1mm Antenna area : 16 x 6 mm Ft 2.4GHz Ft GPS Ft 2.4GHz Ft 5.5GHz Mt Common Component P/N 3.nH 1.6pF 1.nH 2.7nH Measurement condition for Radiation Pattern Er PCB θ Eø Chip antenna Eθ ø 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 ELECTRICAL CHARACTERISTICS Item Frequency Range (MHz) Min. Typ. Max. 1574 to 1577 1.3 4. 24 to 2484 1.8 4. 515 to 585 2.4 4. Polarization Linear PCB size (mm) 13 x 75 Antenna keep-out area (mm) 16 x 6 Characteristic Impedance ( ) 5 (Nominal) This is typical antenna performance with the standard PCB. TEMPERATURE RANGE Operating temperature Storage temperature C C 4 to +85 4 to +85 FREQUENC CHARACTERISTICS GPS BAND 11 1 1 2 9 Efficiency(dB) 3 4 5 6 7 8 7 6 5 4 8 3 9 2 1 1 1.5 1.525 1.55 1.575 1.6 1.625 1.65 Efficiency Spec () 2.4GHz BAND 5.5GHz BAND Efficiency(dB) 11 1 2 1 9 3 4 8 7 5 6 6 7 5 4 8 3 9 2 1 1 2.3 2.35 2.4 2.45 2.5 2.55 2.6 Efficiency Spec () 11 1 2 1 9 3 4 8 7 5 6 6 7 5 4 8 3 9 2 1 1 5 5.2 5.4 5.6 5.8 6 Efficiency(dB) Efficiency Spec () Tested antenna has been soldered. Evaluation board size is 13x75x1 mm. 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 RADIATION PATTERNS GPS BAND RHCP - plane - plane - plane 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 18 18 18 Average(dBic) Maximum(dBic) Minimum(dBic) 1.5755 6.4 1.7 19.6 Average(dBic) Maximum(dBic) Minimum(dBic) 1.5755 6.5 3.3 13.4 Average(dBic) Maximum(dBic) Minimum(dBic) 1.5755 4.8 2.7 8.8 27 9 27 9 27 9 Tested antenna has been soldered. Evaluation board size is 13x75x1 mm. 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 RADIATION PATTERNS 2.4GHz BAND 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 27 9 18 2.4 6.7 1.7 23.6 6. 1.1 23.6 6. 1. 24.1 2.4GHz GHz GHz 18 2.4 1.8 7.3 21.7 1.4 6.7 2.3 1.7 6.8 2.8 2.4GHz GHz GHz 27 9 27 1(dBi) 1 2 3 4 18 2.4 5.4.7 25.3 4.8.2 21.5 9 4.9.4 24.3 2.4GHz GHz GHz 27 1(dBi) 1 2 3 4 18 2.4 21.1 13.9 44.8 19.8 12.1 45.8 9 19.9 12.3 62.6 2.4GHz GHz GHz 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 27 9 18 2.4 1.5 4.9 38.2 1.2 4.6 4.7 11. 5.4 62.6 2.4GHz GHz GHz 18 2.4 2.8.8 5. 2.3.2 4.2 2.5.3 4.3 2.4GHz GHz GHz Tested antenna has been soldered. Evaluation board size is 13x75x1 mm. 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 RADIATION PATTERNS 5.5GHz BAND 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 27 9 18 5.15 16.4 7.5 4. 5.5 12.4 7.1 38.7 5.85 8.6 3.8 33.9 5.15GHz 5.5GHz 5.85GHz 18 5.15 4.4 1.5 19.1 5.5 3.3.5 2.7 5.85 5. 1.7 27.1 5.15GHz 5.5GHz 5.85GHz 27 9 27 1(dBi) 1 2 3 4 18 5.15 3.3 3.3 15.7 5.5 3.5 2.8 2.6 9 5.85 3.6 1.5 35.9 5.15GHz 5.5GHz 5.85GHz 27 1(dBi) 1 2 3 4 18 5.15 18.8 11.3 4. 5.5 14.8 7.4 36.2 9 5.85 15.6 9.6 38.6 5.15GHz 5.5GHz 5.85GHz 27 1(dBi) 1 2 3 4 9 27 1(dBi) 1 2 3 4 9 27 9 18 5.15 2.5 4.1 26.9 5.5 2.2 4. 27.2 5.85 4. 2.4 28.1 5.15GHz 5.5GHz 5.85GHz 18 5.15 5.1 1. 34.5 5.5 6. 1.2 21.4 5.85 4.3.1 11. 5.15GHz 5.5GHz 5.85GHz Tested antenna has been soldered. Evaluation board size is 13x75x1 mm. 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 RECOMMENDED REFLOW PROFILE Soaking Working Soldering Peak T4 T5 T4 T: Temperature T2 T3 t3 T3 T1 t1 t2 t: Time Soaking Working Soldering Peak Temp. Time Temp. Time Temp. Time Temp. T1 T2 t1 T3 t2 T4 t3 T5 15 C 18 C 6 to 12s 23 C 3 to 6s 247 to 253 C within 1s 26 C max. 216926 / rf_ant_ant252lct1575ma1_summary

ANT252LCT1575MA1 PACKAGING STLE REEL DIMENSIONS 2.±.5 ø6 +1.. ø18 + 1.5 ø13±.2 ø21±.8 9. +1.. 13.±1. Dimensions in mm TAPE DIMENSIONS ø1.5 +.1 2.±.5 4.±.1 1.75±.1.25±.5 B 3.5±.5 8.±.2 A 4.±.1 K Dimensions in mm A B K 2.35±.5 2.85±.5.9±.5 PACKAGE QUANTIT Standard package quantity (pieces/reel) 2, 216926 / rf_ant_ant252lct1575ma1_summary

REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFET REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (1) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety. 216926 / rf_ant_ant252lct1575ma1_summary