ducting systems for ventilation and extraction

The bathroom and WC; a place where we need privacy and comfort. These are areas where odours and humidity can occur. This is the world where Gonal s Technology can help; sometimes seen, sometimes not. Gonal s ducting systems for extraction and air renewal ensures air quality within the home. Using the latest technology to give you high performance that is both quiet and effective. ducting systems for ventilation and extraction We spend a lot of time in the kitchen preparing and cooking food, naturally smells and fumes are created. Extracting them to the outside of your home is the responsibility of Gonal s Ducting Systems. Gonal has the largest ducting range available, and can offer maximum performance in extracting smells and fumes with products suitable for every extractor hood in the market. 2

PRODUCTS INDEX TECHNICAL INFORMATION 4 CHARACTERISTICS OF GONAL SYSTEMS 5 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION 6 TELESCOPIC SYSTEMS FOR VENTILATION 16 FLEXIBLE ELBOWS 17 WALL OUTLETS WINDOWS AND GRILLES FOR VENTILATION 18 KITS FOR EXTRACTION 20 FLEXIBLE HOSE 21 SOUNDPROOF PIPE 22 FLAME RETARDANT SYSTEM 22 EXTRACTOR FAN 23 24 MULTIFORM WC 26 ISO 9001 CERTIFICATE 27 3

TECHNICAL INFORMATION Technical Information is available for ventilation system designers, specifiers and installers to assist you in choosing the optimum GONAL system, assuring the lowest resistance with the best performance. To ensure the correct ventilation/ extraction current building regulations demand that you take into account different factors. Those are extractor ventilation fan, the extraction and flow ratio (l/s o m 3 /h), ducting circuit configuration, its length, pressure loss(pa),etc. Room Rapid ventilation Background ventilation Extractor fan Habitable room 1/20 of floor area 8.000 mm 2 - Kitchen Window 4.000 mm 2 30 l/s near worktop Utility room Window 4.000 mm 2 15 l/s Bathroom Window 4.000 mm 2 15 l/s Toilet room Window 4.000 mm 2 - Domestic building Without window Same conditions with extractor fan, with 15 minutes automatic overrun. Room Rapid ventilation Background ventilation Extractor fan Habitable room 1/20 of floor area < 10 m 2 4.000 m 2 Non-smoking area 8 l/s/pers. < 10 m 2 4.000 mm 2 Smoking area 16 l/s/pers. Kitchen Domestic Type Window 4.000 mm 2 30 l/s near worktop 60 l/s elsewhere Bathroom Window 4.000 mm 2 15 l/s Toilet room 1/20 of floor area 4.000 mm 2 6 l/s/wc or 3 ACH Non Domestic building Without window Same conditions with extractor fan, with 15 minutes automatic overrun or manual control or occupant detecting. All new domestic buildings and extensions must comply with F1 building regulations and provide ventilation in kitchens, utility rooms, bathrooms and WCs. It is essential to make the flow calculation of the area to be ventilated, to make the correct choice of GONAL ducting system. This ca lcu lation is mad e b y multiplying the volu me by th e ACH (air cha nges per hou r) Plea se, se e a tta ched ch art w it h some exa mp les a ccordin g to t he cur rent reg ula tion s. To assure a clean air environment, always use the appropriate fan for your ventilation requirements. By using a sup erio r GONAL syst em y ou will b e prepa red f or an y un fo reseen demand. AN OPTIMUM SYSTEM FOR EACH NEED Room Air changes Example Room volume Necessary Recommended per Hour Flow System Room 2-4 ACH Room 5 x 3 x 2,6 m 5 x 3 x 2,60 = 39m 3 from 78 m 3 /h System 100 (600) Kitchen 10-15 ACH Kitchen 5 x 4 x 2,60 m 5 x 4 x 2,60 = 52m 3 from 780 m 3 /h System 150 (SUPRA) volume = a x b x c = m 3 Utility room Bathroom 15-20 ACH 12-16 ACH Utility room 4 x 3 x 2,60 = 31,2m 3 from 468 m 3 /h System 120 (800) 4 x 3 x 2,60 m System 125 (DUPLA) Bathroom System 120 (800) 4 x 4 x 2,40 m 4 x,4 x 2,40 = 38,4m 3 from 230 m 3 /h System 125 (DUPLA) c Toilet room 3-10 ACH Toilet room 3 x 2 x 2,40 m 3 x 2 x 2,40 = 14,4m 3 from 144 m 3 /h System 100 (600) a b 4

CHARACTERISTICS OF GONAL SYSTEMS EXTRACTION VENTILATION SERIE 500 600 800 DUPLA SUPRA SISTEMA 100 100 120 125 150 RECTANGULAR DUCTING Dimension mm 55 x 110 60 x 120 75 x 150 55 x 220 90 x 180 Cross section mm 2 5565 6669 10584 11284 15399 ROUND DUCTING Dimension mm Ø 100 Ø 100 Ø 120 Ø 125 Ø 150 Cross section mm 2 7850 7850 11304 12265 17660 Flow rate (m 3 /h)* < 300 < 300 300-550 550-650 > 650 * Orientative SPECIFICATIONS Made of self-extinguishing material Maximum working temperature of 80 C For flows from 250 to 1250 m 3 /h Easy and quick assembly A wide range of accessories enables a large versatility Hermetic closure guaranteed Modular assembly without need of silicons or adhesives 92% of ventilation efficiency 5

SERIE SUPRA SYSTEM 150 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION Flat channel Horizontal rectangular 90 elbow (mm) SU-2002/1 90 x 180 / L=1000 9 m SU-2002 90 x 180 / L=1500 13,5 m SU-2002/3 90 x 180 / L=3000 6 m Round pipe (mm) SU2005/1 Ø 150 / L=1000 5 m SU2005 Ø 150 / L=1500 7,5 m SU2005/3 Ø 150 / L=3000 6 m Rectangular flat connector (mm) SU2070 90 x 180 4 u. Round elbow 90 elbow (mm) SU2075 Ø 150 5 u. Round wall plate (mm) SU2020 90 x 180 16 u. SU2045 Ø 150 36 u. Round connector Flat channel wall plate (mm) (mm) SU2030 Ø 150 10 u. SU2090 90 x 180 25 u. Round to rectangular adapter Rectangular flat channel wall outlet (mm) (mm) SU2040 Ø 150 to 90 x 180 20 u. SU2100 90 x 180 10 u. Vertical mixed 90º elbow (mm) Round louvred grille (mm) SU2050 Ø 150 to 90 x 180 4 u. SU2052 Ø 150 18 u. Vertical rectangular 90 elbow Metallic rectangular clamp (mm) (mm) SU2060 90 x 180 5 u. SU2110 90 x 180 25 u. Round flexible elbow Rectangular flexible elbow (mm) (mm) CRF-150C Ø 150 / L=500 3 u. CCF-900-C 90 x 180 / L=500 3 u. 6

Reducer cone Round flexible hose Round louvred grille SU2065 Ø 150 to 125 30 u. 0690/1 Ø 150 / L=1000 40 u. 0690/3 Ø 150 / L=3000 20 u. 0690/6 Ø 150 / L=6000 1 0 u. Characteristics of GONAL systems SUPRA SYSTEM / 150 mm Motors for air flows of more of 650 m 3 /h The diameter of intake pipe must not be less than 150 mm. Ø 150 mm 0464 Ø 150 25 u. Internal damper SU2031 Ø 150 15 u. The sizes of all series are expressed in mm. We recommend pipe diameters to suit your extraction volume requirements as per IEC 61591standards. Made of self-extinguishing material. Maximum working temperature of 80 C. For flows from 650 m 3 /h. Easy and quick assembly. A wide range of accessories for maximum versatility. Hermetic closure guaranteed. Modular assembly does not require sealant or adhesive. 92% of ventilation efficiency. 7

SERIE DUPLA SYSTEM 125 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION Flat channel Piezas Round 90 elbow T-P-1002/1 55 x 220 / L=1000 9 m T-P-1002 55 x 220 / L=1500 13,5 m T-P-1002/3 55 x 220 / L=3000 12 m Round pipe T-P 1005/1 Ø 125 / L=1000 7 m T-P 1005 Ø 125 / L=1500 10,5 m T-P 1005/3 Ø 125 / L=3000 12 m Rectangular flat connector T-P 1500 Ø 125 10 u. Flat channel wall plate T-P 1090 55 x 220 25 u. Rectangular flat channel wall outlet Finish T-P 1020 55 x 220 24 u. T-P 1100 55 x 220 White 24 u. Round connector Rectangular flat channel wall outlet Finish T-P 1030 Ø 125 24 u. T-P 1100S 55 x 220 Sandstone 24 u. Round to rectangular adapter Rectangular flat channel wall outlet Finish T-P 1040 Ø 125 to 55 x 220 10 u. T-P 1100T 55 x 220 Brick / Terracota 24 u. Vertical mixed 90 elbow Metallic rectangular clamp T-P 1050 Ø 125 to 55 x 220 24 u. T-P 1110 55 x 220 25 u. Orientative vertical mixed 90 elbow Metallic round clamp T-P 1025 Ø 125 to 55 x 220 10 u. 0857 Ø 120 25 u. Vertical rectangular 90 elbow Multi cone reducer T-P 1060 55 x 220 20 u. 0660 Ø 125 to 100 40 u. Horizontal rectangular 45 elbow Reducer cone T-P 1075 55 x 220 18 u. 0860 Ø 125 to 120 22 u. Horizontal rectangular 90 elbow Reducer cone Ø 125 to Ø 100 T-P 1070 50 x 220 12 u. T-P 1300 Ø 125 to 100 25 u. Round flexible elbow Rectangular flexible elbow CRF-125-C Ø 125 / L=500 4 u. CCF-1000-C 55 x 220 / L=500 3 u. 8

Round flexible hose 0689/1,5 Ø 127 / L=1500 60 u. 0689/3 Ø 127 / L=3000 30 u. 0689/6 Ø 127 / L=6000 15 u. Characteristics of GONAL systems DUPLA SYSTEM / 125 mm Motors for air flows between 550 to 650 m 3 /h Ø 125 mm Round louvred grille T-P 1200 Ø 125 10 u. Internal damper The diameter of intake pipe must not be less than 125 mm. T-P 1031 Ø 125 15 u. Mixed T-joint T-2 55 x 220 x L=300 Ø 125 8 u. Round T-joint TR-125 Ø 125 4 u. Rectangular T-joint TT-4 55 x 220 12 u. We recommend pipe diameters to suit your extraction volume requirements as per IEC 61591standards Made of self-extinguishing material. Maximum working temperature of 80 C. For flows from 550 to 650 m 3 /h. Easy and quick assembly. A wide range of accessories for maximum versatility. Hermetic closure guaranteed. Modular assembly does not require sealant or adhesive. 92% of ventilation efficiency. Rectangular end cap TPC-2 55 x 220 24 u. Reducer 45º elbow T-P 1545 55 x 220 10 u. Rubber joint T-P 1115 Ø 125 1 u. 9

SERIE 800 SYSTEM 120 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION Flat Channel* Round 90 elbow 0801/1 75 x 150 / L=1000 9 m 0801 75 x 150 / L=1500 13,5 m 0801/3 75 x 150 / L=3000 12 m Round pipe* 0805/1 Ø 120 / L=1000 8 m 0805 Ø 120 / L=1500 12 m 0805/3 Ø 1 20 / L=3000 12 m Rectangular flat connector 0870 Ø 120 22 u. 0870-B Ø 120 6 u. Round 45 elbow Flat channel wall plate 0876 Ø 120 22 u. 0810 75 x 150 27 u. 0810-B 75 x 150 24 u. 0840 75 x 150 25 u. 0840-TB 75 x 150 50 u. Round connector Round wall plate 0815 Ø 120 24 u. 0815-B Ø 120 26 u. Round to rectangular adapter 0845 Ø 120 25 u. 0845-TB Ø 120 50 u. Rectangular flat channel wall outlet 0820 Ø 120 to 75 x 150 28 u. 0820-B Ø 120 to 75 x 150 6 u. Vertical mixed 90º elbow 0826 Ø 120 to 75 x 150 34 u. 0826-B Ø 120 to 75 x 150 6 u. Vertical rectangular 90 elbow 0850 75 x 150 20 u. 0850-B 75 x 150 20 u. Round louvred grille 0852 Ø 120 18 u. 0852-B Ø 120 16 u. Metallic rectangular clamp 0830 75 x 150 38 u. 0830-B 75 x 150 9 u. Horizontal rectangular 45 elbow 0875 75 x 150 36 u. Round flexible elbow CRF-120-C Ø 120 / L=500 4 u. CRF-120-B Ø 120 / L=500 6 u. Mixed round flexible elbow 0855 75 x 150 25 u. 0855-TB 75 x 150 50 u. Metallic round clamp 0857 Ø 120 25 u. 0857-TB Ø 120 50 u. Rectangular flexible elbow CCF-800-C 75 x 150 / L=500 8 u. CCF-800-B 75 x 150 / L=500 6 u. Mixed rectangular flexible elbow CMF-120-C Ø 120 to 75 x 150 / L=500 4 u. CMF-800-C 75 x 150 to Ø 120 / L= 500 4 u. Horizontal rectangular 90º elbow Cone reducer 0835 75 x 150 24 u. 0835-B 75 x 150 5 u. 0860 Ø 125 to 120 22 u. 0860-B Ø 125 to 120 23 u. 10

Multi-cone reducer Round flexible hose* 0660 Ø 125 to 100 40 u. 0689/1,5 Ø 127 / L=1500 60 u. 0689/3** Ø 127 / L=3000 30 u. 0689/6 Ø 127 / L=6000 15 u. Rectangular flexible hose Characteristics of GONAL systems 800 SYSTEM / 120 mm Motors for air flows from 300 a 550 m 3 /h The diameter of intake pipe must not be less than 120 mm. Ø 120 mm PR-800 75 x 150 / L=1000 4 u. Embedded inner grille 0595 Ø 120 25 u. We recommend pipe diameters to suit your extraction volume requirements as per IEC 61591standards Internal damper 0816 Ø 120 16 u. Rectangular T-joint TT-3 75 x 150 10 u. (*) Including (-B) at these codes you will receive the items with bar code. (**) 0688/3-B is packaged in 8 units. Made of self-extinguishing material. Maximum working temperature of 80 C. For flows from 300 to 550 m 3 /h. Easy and quick assembly. A wide range of accessories for maximum versatility. Hermetic closure guaranteed. Modular assembly does not require sealant or adhesive. 92% of ventilation efficiency. s ended in ( - B ) refers to INNOVATIVE EXPOGONAL see page 26/27 11

SERIE 600 SYSTEM 100 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION Flat channel* Round 45 elbow 0601/1 60 x 120 / L=1000 10 m 0601 60 x 120 / L=1500 15 m 0601/3 60 x 120 / L=3000 18 m Round pipe* 0605/1 Ø 100 / L=1000 8 m 0605 Ø 100 / L=1500 12 m 0605/3 Ø 100 / L=3000 18 m Rectangular flat connector 0676 Ø 100 36 u. Flat channel wall plate 0640 60 x 120 25 u. 0640-TB 60 x 120 50 u. Round-round embellish wall plate 0610 60 x 120 56 u. 0610-B 60 x 120 58 u. 0565 Ø 100 a Ø 100 24 u. Round connector Round wall plate 0615 Ø 100 40 u. 0615-B Ø 100 45 u. Round to rectangular adapter 0645 Ø 100 25 u. 0645-TB Ø 100 50 u. Rectangular flat channel wall outlet 0620 Ø 100 to 60 x 120 48 u. 0620-B Ø 100 to 60 x 120 16 u. Vertical mixed 90 elbow 0652 60 x 120 20 u. 0652-B 60 x 120 20 u. Round louvred grille 0625 Ø 100 to 60 x 120 50 u. 0625-B Ø 100 to 60 x 120 16 u. Vertical rectangular 90 elbow 0630 60 x 120 64 u. 0630-B 60 x 120 19 u. Horizontal rectangular 45 elbow 0653 Ø 100 30 u. Rectangular flat channel wall outlet 0550-M Ø 100 / 55 x 110 - Brown 30 u. 0550 Ø 100 / 55 x 110 - White 30 u. 0550-B Ø 100 / 55 x 110 - White 24 u. Metallic rectangular clamp 0671 60 x 120 20 u. Horizontal rectangular 90 elbow 0635 60 x 120 45 u. 0635-B 60 x 120 12 u. Round flexible elbow 0655 60 x 120 25 u. 0655-TB 60 x 120 50 u. Metallic round clamp 0656 Ø 100 25 u. 0656-TB Ø 100 50 u. Rectangular flexible elbow CRF-100-C Ø 100 / L=500 8 u. CRF-100-B Ø 100 / L=500 9 u. CCF-600-C 60 x 120 / L=500 4 u. CCF-600-B 60 x 120 / L=500 3 u. Round 90 elbow Cone reducer 0670 Ø 100 36 u. 0670-B Ø 100 11 u. 0665 Ø 120 to 100 36 u. 12

Multi cone reducer Round flexible hose* 0688/2 Ø 102 / L=2000 60 u. 0688/3** Ø 102 / L=3000 45 u. 0688/6 Ø 102 / L=6000 30 u. Internal damper 0660 Ø 125 to 100 40 u. 0660-B Ø 125 to 100 56 u. Characteristics of GONAL systems 600 SYSTEM / 100 mm Motors for air flows up to 300 m 3 /h The diameter of intake pipe must not be less than 100 mm. Ø 100 mm 0616 Ø 100 20 u. Round T-Joint TR-100 Ø 100 12 u. Embedded grille 0463 Ø 100 25 u. (*) Including (-B) at these codes you will receive the items with bar code. (**) 0688/3-B is packaged in 8 units. We recommend pipe diameters to suit your extraction volume requirements as per IEC 61591standards Made of self-extinguishing material. Maximum working temperature of 80 C. For flows from 300 m 3 /h Easy and quick assembly. A wide range of accessories for maximum versatility. Hermetic closure guaranteed. Modular assembly does not require sealant or adhesive. 92% of ventilation efficiency. s ended in ( - B ) refers to INNOVATIVE EXPOGONAL see page 26/27 13

SERIE 500 SYSTEM 100 DUCTING SYSTEMS FOR VENTILATION AND EXTRACTION Flat channel* Round 90 elbow 0501/1 55 x 110 / L=1000 12 m 0501 55 x 110 / L=1500 18 m 0501/3 55 x 110 / L=3000 18 m Round pipe* Rectangular flat connector 0510 55 x 110 66 u. 0510-B 55 x 110 72 u. Round connector 0605/1 Ø 100 / L=1000 8 m 0605 Ø 100 / L=1500 12 m 0605/3 Ø 100 / L=3000 18 m 0670 Ø 100 36 u. 0670-B Ø 100 11 u. Round 45 elbow Flat channel wall plate 0676 Ø 100 36 u. Round wall plate 0645 Ø 100 25 u. 0645-B Ø 100 50 u. 0615 Ø 100 40 u. 0615-B Ø 100 45 u. Round to rectangular adapter 0540 55 x 110 25 u. 0540-TB 55 x 110 50 u. Rectangular-round embellish wall plate 0520 Ø 100 to 55 x 110 36 u. 0520-B Ø 100 to 55 x 110 16 u. Vertical mixed 90 elbow 0525 Ø 100 to 55 x 110 45 u. 0525-B Ø 100 to 55 x 110 18 u. Rectangular vertical 90 elbow 0545 Ø 100 to 55 x 110 24 u. Round-round embellish wall plate 0565 Ø 100 to Ø 100 24 u. Round louvred grille 0530 55 x 110 70 u. 0530-B 55 x 110 24 u. Horizontal rectangular 45 elbow 0550 Ø 100 / 55 x 110 - White 30 u. 0550-B Ø 100 / 55 x 110 - White 30 u. Round louvred grille 0570 55 x 110 20 u. 0570-B 55 x 110 24 u. Round flexible elbow CRF-100-C Ø 100 / L=500 8 u. CRF-100-B Ø 100 / L=500 9 u. Rectangular flexible elbow 0550-M Ø 100 / 55 x 110 - Brown 30 u. Mixed round flexible elbow CMF-100-C Ø 100 to 55 x 110 / L=500 4 u. Mixed rectangular flexible elbow CCF-500-C 55 x 110 / L=500 8 u. CCF-500-B 55 x 110 / L=500 10 u. CMF-500-C 55 x 110 to Ø 100 / L=500 4 u. Horizontal rectangular 90 elbow Embedded grille 0535 55 x 110 48 u. 0535-B 55 x 110 15 u. 0463 Ø 100 25 u. 14

Metallic rectangular clamp 0555 55 x 110 25 u. 0555-TB 55 x 110 50 u. Metallic round clamp 0656 Ø 100 25 u. 0656-TB Ø 100 50 u. Multi cone reducer Characteristics of GONAL systems 500 SYSTEM / 100 Motors for air flows up to 300 m 3 /h The diameter of intake pipe must not be less than 100 mm. Ø 100 mm 0660 Ø 125 to 100 40 u. 0660-B Ø 125 to 100 56 u. Round flexible hose* 0688/2 Ø 102 / L=2000 60 u. 0688/3** Ø 102 / L=3000 45 u. 0688/6 Ø 102 / L=6000 30 u. Rectangular flexible hose Round T-Joint PR-500 55 x 110 /L=1000 4 u. TR-100 Ø 100 12 u. Rectangular end cap We recommend pipe diameters to suit your extraction volume requirements as per IEC 61591standards Made of self-extinguishing material. Maximum working temperature of 80 C. For flows from 300 m 3 /h Easy and quick assembly. A wide range of accessories for maximum versatility. Hermetic closure guaranteed. Modular assembly does not require sealant or adhesive. 92% of ventilation efficiency. TPC-1 55 x 110 25 u. Rectangular T-joint TT-2 55 x 110 9 u. Mixed T-joint T-1 55 x 110 x 300 Ø 100 12 u. s ended in ( - B ) refers to INNOVATIVE EXPOGONAL see page 26/27 Internal damper 0616 Ø 100 20 u. (*) Including (-B) at these codes you will receive the items with bar code. (**) 0688/3-B is packaged in 8 units. 15

TELESCOPIC SYSTEMS FOR VENTILATION Necessary to guarantee a room air renovation, from inside to outside. The external grille shape assure the non-return of air Compatible with our rigid ducting pipes. INTERIOR-EXTERIOR SYSTEM PHOTOGRAPH Description System Air flow SVD 100 Direct System interior / exterior Exterior wall outlet grille Ø 100 mm 1 100 300 m 3 /h Telescopic pipe 180-360 1 Exterior wall grille 1 SVD 125 Direct System interior / exterior Exterior wall outlet grille Ø 125 mm 1 125 300-550 m 3 /h Telescopic pipe 180-360 1 Exterior wall grille 1 SYSTEM CONNECTION PHOTOGRAPH Description System Air flow STT 100 Telescopic system 100 Wall outlet with internal damper 1 100 300 m 3 /h Telescopic pipe 250-450 mm 1 Wall outlet window 1 STT 125 Telescopic system 125 Wall outlet with internal damper 1 125 300-550 m 3 /h Telescopic pipe 250-450 mm 1 Wall outlet window 1 STT 150 Telescopic system 150 Wall outlet with internal damper 1 150 > 650 m 3 /h Telescopic pipe 250-450 mm 1 Wall outlet window 1 We supply telescopic systems according to your needs. Please ask for them! 16

FLEXIBLE ELBOWS QUICK ASSEMBLY EASY HANDLING TOTAL COMPATIBILITY Variable angles from 0 to 90 ADAPTABLE AND EASY TO INTEGRATE TO ANY INSTALLATION PHOTOGRAPH Description System CRF-100-C Round flexible elbow Ø 100 mm 500 8 CRF-120-C Round flexible elbow Ø 120 mm 800 4 CRF-125-C Round flexible elbow Ø 125 mm DUPLA 4 CRF-150-C Round flexible elbow Ø 150 mm SUPRA 3 CCF-500-C Rectangular flexible elbow 55 x 110 mm 500 8 CCF-800-C Rectangular flexible elbow 75 x 150 mm 800 8 CCF-1000-C Rectangular flexible elbow 55 x 220 mm DUPLA 3 CCF-900-C Rectangular flexible elbow 90 x 180 mm SUPRA 4 CMF-100-C Mixed round flexible elbow Ø 100 to 55 x 110 mm 500 4 CMF-120-C Mixed round flexible elbow Ø 120 to 75 x 150 mm 800 4 CMF-500-C Mixed rectangular flexible elbow 55 x 110 to Ø 100 mm 500 4 CMF-800-C Mixed rectangular flexible elbow 75 x 150 to Ø 100 mm 800 4 CCF600-C Rectangular flexible elbow 60 x 120 mm 600 3 17

WALL OUTLETS AND GRILLES FOR VENTILATION The ventilation is one of the requirements of a modern home, for this reason GONAL offers a range of wall outlets and grilles for ventilation... practical, easy to assemble with a proven efficiency in the market. BS 493: Airbriks and gratings for ventilation meet Standard BS 493. PLASTIC GRILLES SURFACE MOUNTED PRODUCT Dimension/mm Air movement /cm 2 0461 230 x 230 210 60 u. 0462 230 x 430 420 32 u. 0460 150 x 200 140 52 u. EMBEDDED PLASTIC GRILLES PRODUCT Dimension/mm Air movement /cm 2 0463 Ø inner grille 96* 40 25 u. 0595 Ø inner grille 121* 100 25 u. 0464 Ø inner grille 156* 135 25 u. We supply telescopic systems according to your needs. PLASTIC FIXED GRILLES WHITE COLOUR Our range of wall outlets grilles can be installed both inside an out for applications such as bathrooms, kitchens, utility rooms, and other areas which need air renewal. PRODUCT Dimension /mm Air movement/cm 2 0592 Ø 90-140* 100 25 u. 0593 Ø 125-160* 140 25 u. 0596 183 x 154 (with pegs) (Ø 80-140) 60 20 u. Versatile grilles, one grille for all diameters. *Grilles adaptable to ducting systems with diameters of 90/125 and 140/160 18

METALLIC GRILLES PRODUCT Dimension/mm Air movement /cm 2 0465 150 x 150 140 25 u. 0466 170 x 170 170 25 u. 0467 200 x 200 200 25 u. White lacquered STAINLESS STEEL GRILLES Finished in high quality stainless steel with good design aesthetics. ADVANTAGES: Embodies an internal damper. High quality finished. Long life. Does not tarnish. Easy cleaning Good design High strength and durable PRODUCT Dimension/mm System 0402/0 Front: (190 x 190 ) Inner: (Ø ext. 100) 100 1 u. 0402/1 Front: (190 x 190) Inner: (Ø ext. 125) 125 1 u. WOOD VENT GRILLES Grilles made of decorative wood in oak and beech. Available in both square and round. PRODUCT Dimension/mm Air movement /cm 2 Colour 0470 96 x 96 30 Oak 10 u. 0471 96 x 96 30 Beech 10 u. 0472 156 x 156 77 Oak 10 u. 0473 156 x 156 77 Beech 10 u. 0474 Ø 96 inner 27 Oak 10 u. 0475 Ø 96 inner 27 Beech 10 u. 0476 Ø 156 inner 60 Oak 10 u. 0477 Ø 156 inner 60 Beech 10 u. 19

KITS FOR EXTRACTION Our KITS have been specially designed for the extraction of fumes on cooker hoods. Are available on system 100-125 and 150, covering therefore, the flow needs from 300 m 3 /h to 900 m 3 /h. Maximum length 3 mts. We can provide the kit with all of accessories that you need. PRODUCT Description Air flow KV-100 KIT SYSTEM 100 300-600 m 3 /h Composition: Flat channel 55 x 110 x 1000 mm 2 Rectangular flat connector 1 Mixed 90º elbow 1 Flat channel wall plate 1 Round louvred grille 1 Reducer cone Ø 100 to 120 mm 2 Flexible hose Ø 102 mm, L= 1 m 1 Screw and plugs 1 KV-125 KIT SYSTEM 125 600-900 m 3 /h Composition: Flat channel 55 x 220 x 1000 mm 2 Rectangular flat connector 1 Mixed 90º elbow 1 Flat channel wall plate 1 Round louvred grille 1 Reducer cone Ø 120 to 125 mm 2 Flexible hose Ø 127 mm, L= 1 m 1 Screw and plugs 1 KV-150 KIT SYSTEM 150 > 900 m 3 /h Composition: Flat channel 90 x 180 x 1000 mm 2 Rectangular flat connector 1 Mixed 90º elbow 1 Flat channel wall plate 1 Round louvred grille 1 Reducer cone Ø 120 to 125 mm 2 Flexible hose Ø 150 mm, L= 1 m 1 Screw and plugs 1 We can provide the kit with all of accessories that you need. 20

FLEXIBLE HOSE Flexible hose is made of PVC, encapsulating a spring steel helix wire. Flexible hose provides solutions for small installations or modifications. It is available in different diameters and lengths. IDEAL FOR : Kitchen stores, DIY, ironmongery and industrial suppliers, plumbing outlets WORKING TEMPERATURE: MAXIMUM PRESSURE: COLOUR: CLASSIFIED: From 0 to 80 C 100 m.c.a. White Self-extinguish Round flexible hose Dimension/mm 0690/1 Ø 1 50 / L=1000 40 u. 0690/3 Ø 1 50 / L=3000 20 u. 0690/6 Ø 1 50 / L=6000 10 u. 0689/1,5 Ø 127 / L=1500 60 u. 0689/3 Ø 127 / L=3000 30 u. 0689/6 Ø 127 / L=6000 15 u. 0688/2 Ø 102 / L=2000 60 u. 0688/3 Ø 102 / L=3000 45 u. 0688/6 Ø 102 / L=6000 30 u. Rectangular flexible hose Dimension/mm Piezas PR-800 75 x 150 / L=1000 4 u. Rectangular flexible hose Dimension/mm Piezas PR-500 55 x 110 / L=1000 4 u. APPLICATIONS EXTRACTION TUMBLE DRYERS VENTILATION AIR INTAKES STEAM EVACUATION BATHROOMS SMALL INSTALLATIONS Carton box size: 600 x 400 x 400 mm Pallet size: 800 x 1200 x 2100 mm PLEASE CONSULT FOR ANY SPECIAL LENGTHS AND PACKAGING 21

SOUNDPROOF PIPE Acoustic insulation for ducting systems for extraction of fumes TECHNICAL SPECIFICATIONS: 25 mm / 16 Kg. m 3 fibreglass insulation. Reinforced by an external aluminium foil / polyester 25 micras The jacket prevents steam CHARACTERISTICS: Temperatures range: -30 C / + 140 C M1 classified (flame retardant) 560 mm 500 mm Reference Composition Description AL 120 Pipe of Ø 120 mm. L=560 mm cover L= 500 mm Insulating pipe Ø 120 mm AL 125 Pipe of Ø 125 mm. L=560 mm cover L= 500 mm Insulating pipe Ø 125 mm AL 150 Pipe of Ø 150 mm. L=560 mm cover L= 500 mm Insulating pipe Ø 150 mm AL 600 Pipe of 60 x 120 mm. L=560 mm cover L= 500 mm Insulating pipe Ø Serie 600 AL 800 Pipe of 75 x 150 mm. L=560 mm cover L= 500 mm Insulating pipe Ø Serie 800 FLAME RETARDANT SYSTEM An effective seal to stop fire ACTION Protection acts between 180-200 ºC, the self-extinguish filter expands itself with a ratio of 17 times its volume, causing a pressure upon t he tube of 10 bar. The expansion of the self-extinguish filter causes the pipe to break, by its oppression. Therefore, damaged area w ill be isolated from the remaining areas. Tested by B5476 Standards Parts 20 to 22, for 2 hours of fire protection. COMPOSITION This self-extinguish and self-expanding material is wrapped by a thin plastic covering which reacts to the heat from fire. It expands inwards stopping the spread of fire by rapidly providing 100% fire proof seal. INSTALATION It is fixed around the ducting with an adhesive tape.protection must be placed between the duct and the wall. In the event of fire the self-extinguish and self-expanding material expands due to the temperature and pressure. As a result constricts the duct preventing the fire spreading towards the tube. Reference FW110 x 55 FW150 x 75 FW220 x 55 FW100 FW125 FW150 Description Protection against fire 55 x 110 mm Protection against fire 75 x 150 mm Protection against fire 55 x 220 mm Protection against fire Ø 100 mm Protection against fire Ø 125 mm Protection against fire Ø 150 mm 22

EXTRACTOR FANS The extractor fans are essential elements for all the cooker hoods without extractor engine. Their easy installation as well as their adaptability to the Gonal System 100 (Serie 500), pipes and accessories makes the extractor fans indispensable for the air flow circuits lower than 300 m 3 /h PRODUCT Technical specifications Description 0580 Tension: 220 Extractor with filter 4 u. Frequency: 50Hz Absorbed power: 120W Air flow: max 320 m 3 /h Loudness: 50 db Engine with thermal frequency Weight: 2,5 Kg 0585 Tension: 220 In-line tubular 4 u. Frequency: 50Hz extractor fan Absorbed power: 120W Air flow: max 320 m 3 /h Loudness: 50 db Engine with thermal frequency Weight: 2,5 Kg 0590 Engine: 30W In-line tubular 2 u. Air flow: max 250 m 3 /h extractor fan Adaptable to pipes From 100 to 120 mm A 150 D C A = 235 mm B = 125 mm C = 98 mm D = 118 mm B 23

DIMENSION Height 184 x Width 117 x Depth 51 cm Available in: SERIE 500 / SERIE 600 / SERIE 800 Combined: SERIE 500-800 / SERIE 600-800 Accessories Identifiable EAN label 24

An innovative point sales presentation for ventilation and extraction systems. Less storage space required with these new accesories BOX PACK. ADVANTAGES OF THE NEW PACKAGING BOX PACK Less number of pieces per box Piece with barcode Stronger packaging Functional box for packaging and display An image of the piece is show in the box Maximum utilization of space Assembly details DIY Usual presentation easily accesible 27 25

MULTIFORM WC ONE SOLUTION FOR ALL SITUATIONS EXTENDIBLE SLEEVE WITH DIFFERENT LENGTH Adapts to all needs. No adhesive required, watertight, maintain required shape. 90º 90º 90º Description /mm Round multiform pipe Ø 100 / Ø 100 In PE 280 x 650 Round multiform pipe Ø 90 / Ø 120 In PP 280 x 570 8111 15 u. 8220 16 u. To solve your installation in 5 minutes Long or short S shape Elbow shape 26

IS0 9001 CERTIFICATE Socio protector 27

NOTES 28

27 31

It is forbidden to reproduce the catalogue