PAINT READY CABLE TRAY

Similar documents
STEEL CABLE TRAY LADDER

ACCESSORIES QUICK CONNECTOR COVER BRACKETS BARRIER CUSTOM TEES & CROSSES

and solid bottom 10 straight sections 72 Fittings 42 Covers 77 Splices & connectors 24 accessories Metallic 26 long-span tray

ADDER SYSTEM CABLE L

CABLE TRAY SURFACE RACEWAY J-HOOKS IN-FLOOR SYSTEMS POWER POLES DESK PEDESTALS CHANNEL TRAY

T&B Cable Tray. In this section...

Series 1 Steel - Straight Sections

Swifts XRF extra heavy duty return flange straight lengths

Quality from the Cutting Edge of Fabrication

Steel Ladder Cable Trays & Accessories

Series 1 Steel - Straight Sections

KwikSplice Aluminum Cable Tray - Straight Sections & Accessories

Cable & Pipe Supports

CLSME-12. NEMA 12B Rated Aluminium Cable Ladder System

Quality from The Cutting Edge of Fabrication

Cable Tray and Accessories

Series 2, 3, 4, & 5 Aluminum - Straight Sections

Cable Tray Ladder, Trough, Channel, Under Floor, Shielded CH-117O

HB 150 ED For. Hose I.D. 11/2 (3.8cm) The Best Hose Suspension in the World MODEL

Cable Tray Straight Sections Pages Fittings Pages Inside Vertical Bends. 90 Page Page Page Page 1-15

SVT Switch Mounting and Wiring Instructions

HDMANN. FRP Solutions for Cable Management Systems. cable management system. Cable Tray Instrumentation Tray Accessories

T&B Cable Tray. Metallic Aluminum. Covers. Number Selection

EXACTA. TURRET PRESS TOOLING Weideman & Behrens Type. H&O DIE SUPPLY, INC CAT #T064 SS-10 SS-8 SS-9 SS-4 SS-2 SS-6 SS-5

Cera-Notch Grooving and Threading System

2250 FT FLAT TOP BELTS (Pitch mm)

Low Profile Insertion Vortex

Oil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ. P1

Maximum 20 ma, 24 VDC 825 ohms (see section 3.3) Supply voltage dependence

Conductivity Measuring Cells ConduMax W CLS 19

Cushion and Pneumatic Forklift Trucks D35S / D40S / D45S-5 & D50C / D55C-5

Wire ø in. Cat. No. ETQ 2002SS *ETQ 2004SS *ETQ 2006SS

Dynamic O-Ring Sealing

Reference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data

T L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR

T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6

EFFECTIVE: October 1, October 15, 2008

Angles Hot rolled, weldable structural steel sections

General Introduction

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

T L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR

AIRSTREAM PUMPS & ACCESSORIES

Channel Cable Tray - Accessories & Fittings

ORDERING INFORMATION5

Vortex In Line Flow Meter

GRIP STRUT STAIR TREADS

CLEAN FITTING (C SERIES / CL SERIES)

Series 1 Steel - Straight Sections

... TRULIFE PROSTHETIC PRODUCTS. Comprehensive line of lower extremity modular components

model H with1920

CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY

- B 5 4 Voltage, Quantity, and Location of switches and lamps. Cable Hanger Position: 1, 2, 3, 4, 5, 6, 7, 8, 0 0 = unassembled

FRP/GRP Solutions for Cable Management Systems

RST INSTRUMENTS LTD.

REVEAL SERIES ARCHITECTURAL DECK PRODUCTS CANADA

Assembled Double Edge Ring System

REVEAL SERIES ARCHITECTURAL DECK PRODUCTS UNITED STATES

VORTEX IN-LINE FLOW METERS

Cable Ladder System for Ships

Vortex In Line Flow Meter

CHAINS & BELTS PRODUCTION PROGRAM

Leidenschaft means passion in Swiss German, which is abundant in the people who build SIDLER products, they are passionate about quality.

Energy Chain system E4-1 Series E4-56/H4-56/R4-56

Cable management ceiling systems

Installation manual. Pole-mount Deployment System

EVERCONNECT TM. Table of Contents. No-Hub Pipe. Flexible. 7 Couplings. Pipe Caps. Heavy Weight. Test Plugs. Couplings. Shielded Transition

GEMO. Fittings DIN11852/DIN11850 Weld to the DIN11850 and DIN11852 tubes 1.2 TUBES AND FITTINGS

Indumax P CLS50. Technical Information. Highly resistant, inductive conductivity sensor for standard, hazardous and high-temperature applications

Cable Connectors GET CONNECTED

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.G February 2006

Table of Contents. Type: UL/TG/ST 4. Type: UL/TU/ST 13. Type: UL/TT/ST or UL/TC/ST 22. Type: UL/TR/ST 34. Type: UL/LZ/ST 53.

Leidenschaft means passion in Swiss German, which is abundant in the people who build SIDLER products, they are passionate about quality.

Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area

PrimeLock Fittings. A premium PFA fitting for high-purity and corrosive chemical applications FEATURES & BENEFITS APPLICATIONS

Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6

Swifts SW. strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE

Alberta s Third Party Auditor Certification Program. Testing Your Knowledge at the Third Party Auditor Interview Stage

TECHNICAL GUIDE. COOLING & HEAT PUMP MODELS: F2RP024 THRU Hz SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS

MANUAL & AUTOMATED BALL VALVES

Solutions for a wide variety of applications

Trimble FMX Display Kit Installation Manual 54VT-TB-FMX

Coils for solenoid valves

VT-SENSOR AIR VELOCITY AND TEMP

DESIGNING & MANUFACTURING BATHROOMS SINCE 1975 SHOWER ENCLOSURES FOR YOUR HOME. Kali

Model FVP General Specification. Flanged Vortex Plate. Product Features

Piling Product Guide Edition. Servicesteel.org

Why Choose Twice Bright Lighting?

Series 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5

Tungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel

ZEPHYR ZT802X POSITIVE FEED DRILL

WORK WIZARD BALANCERS BALANCERS

Vortex Plate. Model VP General Specification. Product Features

PrimeLock Fittings. A premium PFA fitting for high-purity and corrosive chemical applications FEATURES & BENEFITS APPLICATIONS

Series AN /Series AMC

Bottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.

L91A,B,D Proportioning Pressuretrol. Controllers

Series 61 and Series 62 Modutrol IV Motors

M4-295X DC Servomotors Direct Replacement of SEM MT30 * motors

KAP A Plug-in Busbar Distribution System IEC ME 04

Tube Fitting Installation Instruction

Transcription:

PAINT EADY CABLE TAY SOLID CUSTOM PODE COATING 548 Nicola Place Port Coqutilam, BC V3B 0K4 Canada Direct Tel: 4-942-0050 Main Tel: 4-540-0011 Toll Free: 1-888-222-2633 Email: sales@codeelectric.com orderentry@codeelectric.com www.codeelectric.com MANUFACTUING LTD Tel: 4-540-0011 180 www.codeelectric.com

PAINT EADY - SOLID STAIGHT LENGTH SOLID Pg. 182-184 FITTINGS Pg. 185-202 ELBO OUTSIDE/INSIDE VETICAL ISE TEE COSS EDUCE ACCESSOIES - COVES FLAT Pg. 213 PEAKED LOUVEED CUSTOM ACCESSOIES - HADAE ADJUSTABLE ISE END PLATES Pg. 214-222 CUSTOM FITTINGS A B C www.codeelectric.com 181 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - STAIGHT LENGTH CSA CLASS C Trays are constructed from galvanneal. cm () SOLID idth in 6 12 18 24 36 *Custom width available on request HO TO ODE - EXAMPLE: PSC- Paint Solid idth eady P S C P S C6 *Length in 3 meters CSA C22.2 #126.1-98 Span, m Load kg/m (ft) (lb/ft) PSC 12 H 3 m (10 ft) 97 kg/m (65 lb/ft) PSC6 H for PSC: 102mm (4 ) H for PSC6: 0mm SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 182 www.codeelectric.com

PAINT EADY - SOLID - STAIGHT LENGTH CSA CLASS D Trays are constructed from galvanneal. cm () SOLID idth in 6 12 18 24 36 *Custom width available on request HO TO ODE - EXAMPLE: PSD6- Paint Solid idth eady P S D P S D6 *Length in 3 meters CSA C22.2 #126.1-98 Span, m (ft) Load kg/m (lb/ft) PSD 12 H 3 m (10 ft) 179 kg/m (120 lb/ft) PSD6 H for PSD: 1mm (4 1/2 ) H for PSD6: 0mm SPYDELOK www.codeelectric.com 183 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - STAIGHT LENGTH CSA CLASS E Trays are constructed from galvanneal. cm () SOLID idth in 6 12 18 24 36 *Custom width available on request HO TO ODE - EXAMPLE: PSE- Paint Solid idth eady P S E P S E6 *Length in 3 meters CSA C22.2 #126.1-98 Span, m Load kg/m (ft) (lb/ft) PSE 12 H 3 m (10 ft) 299 kg/m (200 lb/ft) PSE6 H for PSE: 1mm (4 1/2 ) H for PSE6: 0mm SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 184 www.codeelectric.com

PAINT EADY - SOLID - HOIZONTAL ELBO FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PES-C102-- Degree eference Side ail (H) idth () adius () P E S C 102 (4 ) ( ) DEGEES.00.00.00.00 SPYDELOK www.codeelectric.com 185 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - HOIZONTAL ELBO FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PES-D1-- Degree eference Side ail (H) idth () adius () P E S D or E 1 (4 1/2 ) ( ) DEGEES.00.00.00.00 SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 186 www.codeelectric.com

PAINT EADY - SOLID - HOIZONTAL ELBO FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PES-C0-- Degree eference Side ail (H) idth () adius () P E S C, D, or E 0 ( ) DEGEES.00.00.00.00 SPYDELOK www.codeelectric.com 187 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - OUTSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: POVS-C102-- Degree eference Side ail (H) idth () adius () P OV S C 102 (4 ) ( ) DEGEES.00.00.00.00 SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 188 www.codeelectric.com

PAINT EADY - SOLID - OUTSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: POVS-D1-- Degree eference Side ail (H) idth () adius () P OV S D or E 1 (4 1/2 ) ( ) DEGEES.00.00.00.00 SPYDELOK www.codeelectric.com 189 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - OUTSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: POVS-C0-- Degree eference Side ail (H) idth () adius () P OV S C, D, or E 0 ( ) DEGEES.00.00.00.00 SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 1 www.codeelectric.com

PAINT EADY - SOLID - INSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PIVS-C102-- Degree eference Side ail (H) idth () adius () SS IV S C 102 (4 ) ( ) DEGEES.00.00.00.00 SPYDELOK www.codeelectric.com 191 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - INSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PIVS-D1-- Degree eference Side ail (H) idth () adius () SS IV S D or E 1 (4 1/2 ) ( ) DEGEES.00.00.00.00 SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 192 www.codeelectric.com

PAINT EADY - SOLID - INSIDE VETICAL ISE FITTING s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PIVS-C0-- Degree eference Side ail (H) idth () adius () SS IV S C, D, or E 0 ( ) DEGEES.00.00.00.00 SPYDELOK www.codeelectric.com 193 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - HOIZONTAL TEE FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PTS-C102-- eference Side ail (H) idth () adius () P T S C 102 (4 ) ( ) TEE SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 194 www.codeelectric.com

PAINT EADY - SOLID - HOIZONTAL TEE FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PTS-D1-- eference Side ail (H) idth () adius () P T S D or E 1 (4 1/2 ) ( ) TEE SPYDELOK www.codeelectric.com 195 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - HOIZONTAL TEE FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PTS-C0-- eference Side ail (H) idth () adius () P T S C, D, or E 0 ( ) TEE SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 196 www.codeelectric.com

PAINT EADY - SOLID - HOIZONTAL COSS FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PXS-C102-- eference Side ail (H) idth () adius () P X S C 102 (4 ) ( ) COSS SPYDELOK www.codeelectric.com 197 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - SOLID - HOIZONTAL COSS FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PXS-D1-- eference Side ail (H) idth () adius () P X S D or E 1 (4 1/2 ) ( ) COSS SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 198 www.codeelectric.com

PAINT EADY - SOLID - HOIZONTAL COSS FITTINGS s are used to change the size or direction of the cable tray. : galvanneal. HO TO ODE - EXAMPLE: PXS-C0-- eference Side ail (H) idth () adius () P X S C, D, or E 0 ( ) COSS SPYDELOK www.codeelectric.com 199 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - FITTINGS - YE YE fittings are available in right hand or left hand styles. educer Side ail (H) idth (A) idth (B) idth (C) adius Direction cm in cm in cm in cm in () S L V or S C D or E 102 1 0 (4 ) (4 1/2 ) L or ( ) ( ) ( ) * eference corresponds with Side ail and only required for solid orders *idth (A) and idth (B) correspond together *idth (B) provides a range of measurements in centimeters and inches FITTING A A H C C B B C Shaped Profile Left YE educer (L) ight YE educer () SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 200 www.codeelectric.com

H PAINT EADY - FITTINGS - VETICAL TEE Vertical Tees are available in up or down styles. educer Side ail (H) idth () Direction cm in cm in adius () S VT L, V, or S C, D, or E 102 1 0 (4 ) (4 1/2 ) U or D ( ) * eference corresponds with Side ail and only required for solid orders *idth (A) and idth (B) correspond together *idth (B) provides a range of measurements in centimeters and inches FITTING H C Shaped Profile Up T educer (VTU) Down T educer (VTD) SPYDELOK www.codeelectric.com 201 Tel: 4-540-0011 MANUFACTUING LTD

PAINT EADY - FITTINGS - EDUCE reducers are available in right hand, left hand or concentric styles. CODE Manufacturing strongly recommends the use of offset or concentric reducers which provide cost savings and are easier to install while doing the same job. HO TO ODE - EXAMPLE: educer Solid eference PLV-0-- Side ail (H) idth (A) idth (B) cm in cm in cm in P L C L, V, or S C D or E C6, D6, or E6 102 1 0 (4 ) (4 1/2 ) ( ) ( ) * eference corresponds with Side ail and oly required for solid orders *idth (A) and idth (B) correspond together *idth (B) provides a range of measurements in centimeters and inches FITTING A B Left educer (L) Center educer (C) ight educer () SPYDELOK MANUFACTUING LTD Tel: 4-540-0011 202 www.codeelectric.com