Telescopic pillar. For infant care CPMB. Benefits. Standards

Similar documents
Steering units by SKF. By-wire technology for improved vehicle efficiency and performance

TLT. Standards. Telescopic pillar. Very small built-in dimension EN/IEC UL Powerful

Linear actuator CAR 32. Benefits. Industrial reliable and robust actuator Wide range of components Right- and left-hand version

Cylindrical roller bearings for large electric motors

Linear actuator CAT 33. Benefits. Small Robust Highly efficient Lubricated for service life Digital encoder feedback

Evolving chiller performance SKF solutions for centrifugal compressors in chillers

SKF solutions for CNC turning centres

SKF Explorer spherical roller bearings

Telescopic pillars Telesmart TMA

SKF Multilube pumping unit

SKF SEAL JET. NG 040 / NG 060 machines

Wall mount PMV pump with suction kits and hoses

Linear actuator CAHM-31. Benefits. Modular Robust Reliable High speed and/or high load All metal design. Picture CAHM-3130-LS0300-D1-010

Sealed SKF single row angular contact ball bearings. Robust, cost-effective and interchangeable

SKF Flowline. for circulating oil lubrication systems

Air and water reels. Models and Series B. Installation and maintenance guide DANGER

The economical machinery mounting solution

SKF Mudblock cassette seals. A new generation of radial shaft sealing units for off-highway, oil-lubricated applications

Hose reels for diesel exhaust fluid (DEF)

SKF Explorer cylindrical roller bearings. Extended range for large, heavy industrial applications

SKF linear motion solutions for medical equipment

Linear actuator CAT 32B. Benefits. Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback

SKF, the market leader for gas spring seals

SKF Energy Efficient double row angular contact ball bearings. Reduced friction for reduced energy use

ORSCO lubrication systems

SKF Belt Tension System. The SKF way to support transmission Easy Quick Repeatable

Servo pillar CPSM. Тел.: (495) The irst telescopic pillar with servo-power for industrial applications

P653S Centro-Matic oil pump

Product series DSA, DSB, DSC, DSD

SKF sealing solutions for off-highway machines Protecting productivity and profitability at jobsites worldwide

High-speed permanent magnet motor solutions from SKF Optimizing energy efficiency and reliability at wastewater plants

Bearing designs. Spherical roller bearings. Extract from the Railway technical handbook, volume 1, chapter 4, page 96 to 98

SKF Energy Efficient Y-bearings. Reduced friction for reduced energy use

Special industrial solutions. SKF custom-engineered bearings and bearing units

Flexibility and precision in high-performance production. SKF solutions for material joining technologies

Models P, P, P, , DANGER

SKF Multilube pumping unit. for single-, dual-line and progressive lubrication systems

" " (495) For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min

SKF SEAL JET. NG 025 / NG 040 / NG 060 machines

For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems

Engine seals. The Power of Knowledge Engineering

SKF Super-precision Bearing Lubrication Unit. Improved reliability, profitability and reduced environmental impact

Manually or pneumatically actuated Piston pumps

Standard filter Disk filter Return filter. Lubrication systems can fail from the following

for SKF DuoFlex dual-line lubrication systems

SKF Maxilube pumping centre. for SKF DuoFlex, dual-line lubrication systems

SGA and SG-dosers. for SKF DuoFlex dual-line lubrication systems

SKF ConCentra roller bearing units. The fast, easy, error-free way to install and remove plummer blocks

SKF Energy Efficient deep groove ball bearings. Reduced friction for reduced energy use

Lubrication solutions for the rail industry

Steering bearing solutions

For grease For application in SKF DuoFlex dual-line centralized lubrication systems

Maximizing performance. Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility

PTFE seals for screw compressors

The power of lubrication SKF and Lincoln: The world s most complete portfolio of lubrication systems and solutions

Electronic lube meter

Accessories for Minimal Quantity Metering

Motor-driven pump unit GSJB

Electronic lubrication control unit

Relubrication-free solutions for industrial air handling units. Easy to install Long service life Relubrication-free Reduced power consumption

PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2

SKF fan upgrade services. One source for a full range of solutions, from unique bearing systems to circulating oil lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems

LMC 301 controller. For reliable control of small, large or multi-system-type lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems

ElectroPuls E1000 All-Electric Dynamic Test Instrument

UD and UC Gear pump unit

Chain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN

Keep your trucks moving

SKF Explorer angular contact ball bearings. Designed to run faster, cooler, smoother, longer

Spanners and sockets

Improve fleet reliability

SKF bearings with solid oil

Electric Plug-and-Socket Connectors

For reliable control of small, large or multi-system-type lubrication systems

SKF Cooper split bearings

SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B EN

Application List for SKF Linear Ball Bearings

Chain lubrication, accessories

SKF Retractable in stabilizer

Inexpensive solution for the lubrication of linear guides and rolling bearings

SKF EasyRail. Intelligent mobile centralized lubrication systems for wheel flange lubrication and top of rail conditioning

Single-Line Centralized Lubrication Systems

Fuel transfer pump. Model 1550, 12 V DC 15 gal./min. Installation and maintenance guide DANGER

PS/PSL Centrifugal pumps

Directional Valves for oil or grease

Electric cylinders CASM

Suspension bearing solutions SKF solutions for the automotive industry

Bogie subsystems. Articulation joints. Extract from the Railway technical handbook, volume 1, chapter 9, page 172 to 175

Air-oil centralized lubrication systems

SKF VectoLub, VE1B units

PRA Centrifugal pumps

SKF insert bearing units UC range

Electric cylinders CASM-100

Metric dovetail slides. A selection of sizes for tooling, work feeding and positioning operations

Reliable sealing solutions create value

SKF ball bearing units UC range. Japanese Industrial Standards compliant ball bearing units

Product series LP2 and LPC. Lubrication pinions to lubricate open gear wheels and gear racks

Miniature profi le rail guides

Lubrigun lubrication unit

Transcription:

Telescopic pillar For infant care CPB Universal power supply Plug and play Soft start and stop control Low noise level Cable through pillar Grounding continuity IEC 60601-1:2005 (3rd edition)

For infant care CPB Telescopic pillars Suitable operating devices drawing External power supply 2 V DC EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 ZKA-109-2500 ZKA-1050-2500 ZKA-1051-2500 ZKA-1052-2500 ZKA-1058-2500 ZKA-1060-2500 ZKA-1053-2500 ZKA-105-2500 ZKA-1055-2500 ZKA-1056-2500 ZKA-1059-2500 ZKA-1061-2500 109,5 ±1 19,5 ±1 Hand switch Foot switch Desk switch box ains cable Detacheable mains cord Stroke ±2 Connecting diagrams 2 V DC + 100-20 V AC L - PE Operating device N PE Operating device Retracted length ±2 Stroke +160 165 ±1 125 ±1 Technical data Unit Rated push load (with self locking) N 1 000 2 000 2 000 Rated pull load N 0 0 0 Bending moment (dynamic) Nm up to 115 1) up to 250 1) up to 250 1) Speed (full load to no load) mm/s 1 to 15 11 to 15 11 to 15 Telescopic pillar version # of section 2-section 2-section 2-section Stroke mm 230 to 00 230 to 00 200 to 00 Retracted length mm S+160 S+160 S+160 Static Load (ax) in push way N 8 000 8 000 8 000 Static bending moment (ax) Nm 500 500 500 Voltage (rated) V 100 20 AC 50/60 Hz 100 20 AC 50/60 Hz 2 DC Input current (rated) A 1,5 1,6 5 Duty cycle: intermittent operation on/off 1 min./9 min. 1 min./9 min. 1 min./9 min. Ambient temperature C +10 to +0 +10 to +0 +10 to +0 Type of protection IP 20 20 20 Protection class I I Type of control electrical electrical electrical Noise level (ax) db(a) 5 5 5 Weight kg 8 to 11 9 to 12 8 to 11 Stand by power (ax) W 1 to 2.1 2) 1 to 2.1 2) 1) For details, see offset load diagrams 2) The lowest value when powered with the lowest voltage 2

Telescopic pillars For infant care CPB Offset load diagram Load [N] Offset load diagram and Load [N] Speed-load diagram Speed [mm/s] 1 000 900 2 000 1 800 20 18 800 700 600 500 Ideal range Overload range 1 600 1 00 1 200 1 000 Ideal range Overload range 16 1 12 10 00 800 8 300 200 Underload range 600 00 Underload range 6 100 200 2 0 0 100 200 300 Load distance from the center of the pillar [mm] Offset load at full extension in the best axis 0 0 100 200 300 Load distance from the center of the pillar [mm] Offset load at full extension in the best axis 0 0 1 000 2 000 Load [N] ore flexibility with Series CPB design options Built-in with outer tube on top ore hygienic and easy-to-clean design Built-in with outer tube on bottom ore aesthetic design otor orientation B otor orientation A otor orientation A otor orientation B Connections and fastening RJ 5 LAN location 121 ( 6) 133 ( 6) ains power connection (Terminal block) 93 81 ains power connection (Terminal block) RJ 5 LAN location RJ5 Operating device location! IPORTANT 6-8 Nm 6-11 mm Pillar must be attached on plane and rigid surface by screws 6 with a depth of 6 to 11 mm in the pillar. The total length of the screw must be adjusted to the height of the fixture. Screw 6 property class 8.8 3

For infant care CPB Inlet socket box Telescopic pillars Hand Foot Desk ains cables Detacheable mains cords Technical data IEC inlet mains power socket with retainer 1 RJ5 for operating device 1 RJ5 for LAN 2 replacable fuses 8 A Plate with holes as the plates of the pillar CPB Can be fastened on inner and outer tube 205,5 138 161 58 Outlet socket box Hand Foot Desk Detacheable mains cords EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 ZKA-109-2500 ZKA-1050-2500 ZKA-1051-2500 ZKA-1052-2500 ZKA-1058-2500 ZKA-1060-2500 ZKA-1053-2500 ZKA-105-2500 ZKA-1055-2500 ZKA-1056-2500 ZKA-1059-2500 ZKA-1061-2500 ultifunction plug and play accessory Detachable mains power cord Replaceable fuses LAN Connector Easy to use Cord strain relief Designation Order N 0130030 ains cables ZKA-109-2500 ZKA-1050-2500 ZKA-1051-2500 ZKA-1052-2500 ZKA-1058-2500 ZKA-1060-2500 ZKA-1053-2500 ZKA-105-2500 ZKA-1055-2500 ZKA-1056-2500 ZKA-1059-2500 ZKA-1061-2500 ultifunction plug and play accessory 3 IEC outlet sockets Replaceable fuses Integrated mounting plate LAN Connector Easy to use Technical data 3 IEC mains power outlet sockets 1 RJ5 for operating device 1 RJ5 for LAN 2 replacable fuses 8 A Integrated mounting plate with holes 9 mm diameter screws to fasten on pillar CPB Can be fastened on inner and outer tube Designation Order N 52 138 58 215 10 120 160 180 0130032

Telescopic pillars ounting plate For infant care CPB 180 160 ains cable and detacheable mains cord 10 120 ZPL-38382 Easy to use Technical data Can be fastened on inner and outer tube ounting plate with holes 9 mm diameter Designation Order N ZPL-38382 013002 ains cable Detacheable mains cord ZKA-109-2500 ZKA-1050-2500 ZKA-1051-2500 ZKA-1052-2500 ZKA-1058-2500 ZKA-1060-2500 ZKA-1053-2500 ZKA-105-2500 ZKA-1055-2500 ZKA-1056-2500 ZKA-1059-2500 ZKA-1061-2500 Easy to use Identification by a product label ains cable and detachable mains cord Ordering key Description Designation Order N ains cable straight 2,5 m, Schuko : Germany, France,. ZKA-109-2500 0130015 ains cable straight 2,5 m, Typ-L : Italy ZKA-1050-2500 0130016 ains cable straight 2,5 m, British standard : UK ZKA-1051-2500 0130017 ains cable straight 2,5 m, NEA : USA, Japan, ZKA-1052-2500 0130018 ains cable straight 2,5 m, SEV : Switzerland ZKA-1058-2500 0130256 ains cable straight 2,5 m, AS 3112 : PRC, Australia ZKA-1060-2500 0130391 Detachable mains cord straight 2,5 m, Schuko : Germany, France,. ZKA-1053-2500 0130019 Detachable mains cord straight 2,5 m, Typ-L : Italy ZKA-105-2500 0130020 Detachable mains cord straight 2,5 m, British standard : UK ZKA-1055-2500 0130021 Detachable mains cord straight 2,5 m, NEA : USA, Japan, ZKA-1056-2500 0130022 Detachable mains cord straight 2,5 m, SEV : Switzerland ZKA-1059-2500 0130257 Detachable mains cord straight 2,5 m, AS 3112 : PRC, Australia ZKA-1061-2500 0130392 5

For infant care CPB Desk switch STK Telescopic pillars Easy and precise Stylish design Tactile buttons with finger guide 2 colors LED for power and feedback status STK01-SW3000-X100 STK01-UW3000-X100 66,7 12,3 20,8 39 55,8 6 8 Designation L mm 10,5,2 38 STK01-SW3000-X100 500 STK01-UW3000-X100 1 000 See page 7 for technical data and ordering key 17 L 7 Hand switch EHA Robust ergonomic design Tactile buttons Easy mountable fastening hook 2 colors LED for power and feedback status EHA1-13N10N-000 500 300 510 15 57 Ø 32 29 See page 7 for technical data and ordering key 6

Telescopic pillars Foot switch STL For infant care CPB Easy and precise Ergonomic design STL01-GW1000-X190 105 0 82 5 Position Ø 7,6 700 300 150 22 192 5 Position Switches Technical data Unit EHA STL STK ax. operating channels n 1 1 1 Operating power V DC/mA 5/20 5/20 5/20 Type of protection IP 67 x2 Color Grey Grey and anthracite Grey Indicator LED 2 colors for power and feedback status LED 2 colors for power and feedback status Plug RJ5 RJ5 RJ5 Hook with hook Symbols with arrows up/down with arrows up/down with arrows up/down Switches Ordering key Description Designation Order N Desk switch with LED, cable 0,5 m STK01-SW3000-X100 0130025 Desk switch with LED, cable 1,0 m STK01-UW3000-X100 0130026 Hand switch with LED and arrows, coiled cable 1,3 m EHA1-13N10N-000 0131033 Foot switch, coiled cable 1,3 m STL01-GW1000-X190 0131873 7

Seals echatronics Bearings and units Services Lubrication systems The Power of Knowledge Engineering Combining products, people, and applicationspecific knowledge, SKF delivers innovative solutions to equipment manufacturers and production facilities in every major industry worldwide. Having expert ise in multiple competence areas supports SKF Life Cycle anagement, a proven approach to improv ing equipment reliability, optimizing operational and energy efficiency and reducing total cost of ownership. These competence areas include bearings and units, seals, lubrication systems, mecha tronics, and a wide range of services, from 3-D computer modelling to cloud-based condition monitoring and asset management services. SKF s global footprint provides SKF customers with uniform quality standards and worldwide product availability. Our local presence provides direct access to the experience, knowledge and ingenuity of SKF people. SKF BeyondZero is more than our climate strategy for a sustainable environment: it is our mantra; a way of thinking, innovating and acting. For us, SKF BeyondZero means that we will reduce the negative environmental impact from our own operations and at the same time, increase the positive environmental contri bution by offering our customers the SKF BeyondZero portfolio of products and services with enhanced envir onmental performance characteristics. For inclusion in the SKF BeyondZero portfolio, a product, service or solution must deliver significant environmental benefits without serious envir onmental trade-offs. The CPB telescopic pillars are included in the SKF BeyondZero portfolio because they cut power consumption by 72%, compared to standard SKF and competitor s pillars over a ten-year service life, reducing standby power losses. Telescopic pillar Ordering key For accessories, see pages, 5, 6 and 7 Type C P B 2 0 000 Voltage 100 20 V AC 50/60 Hz 1 2 V DC 2 Load: Push (N) 1 000 Only for AC version 1 2 000 2 Tube set 2-section 2 Stroke length (mm) 200 Only for DC version 230 250 300 00 Other per 10 mm from 200 mm or 230 mm for AC version up to 00 mm otor orientation* otor in inner tube otor in outer tube A B Operating device orientation Operating device socket as the motor Operating device socket at both sides A B *Pillar can be placed with outer tube on the top or bottom (please refer to page 3) SKF is a registered trademark of the SKF Group. SKF Group 201 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB T/P2 1531 EN December 201 This publication supersedes publication PUB T/P8 13275 EN. skf.com