lasses 0,2 MM MX 0,5 MM MX 0,5 MM MX 0,2 MM MX 15 B125 250 D400 250 B125 15 15 lass 15 ccess covers and gratings capable of withstanding a 1.5 tonnes test load. For use in areas where only pedestrians and pedal cyclists have access. B 125 lass B 125 ccess covers and gratings capable of withstanding a 12.5 tonnes test load. For use in car parks and pedestrian areas where occasional vehicular access is likely. 250 LSS 250 ccess covers and gratings capable of withstanding a 25 tonnes test load. For use in areas where not extending more than 500mm from the kerb face into the carriageway. D 400 lass D 400 ccess covers and gratings capable of withstanding a 40 tonnes test load. For use in areas where cars and lorries have access, including carriageways, hard shoulders and pedestrian areas. ll units to be either non-rock or silent in operation. E 600 lass E 600 ccess covers and gratings capable of withstanding a 60 tonnes test load. For use in areas where heavy wheel loads are imposed such as loading areas, docks or aircraft pavements. F 900 lass F 900 ccess covers and gratings capable of withstanding a 90 tonnes test load. For use in areas where very heavy wheel loads are imposed such as aircraft pavements.
ircular Manhole over ID 1035.ED - EN 124 Standard, lass 250, D400, E600 - Easy hinged cover to 120 - Blocks at 90 against accidental close - Removable when in vertical position - Easy opening with a special wrench - EPDM Gasket - Ventilated / Non-Ventilated ID 1035.MED P2 Ventilated 90 120 L utomatic opening-closing locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized personnel use. The locking mechanism is optionally integrated into the cover, it won t become deformed and is highly durable. The Lock can be easily unlocked using a special wrench. E With the single joint hinged system allowing the cover to be opened 120 which ensures a comfortable and safe working facility. The cover also locks at 90 which ensures the safety of the working personnel, therefore issues such as the cover falling on working personnel won t be happened anymore. lso, it could be removable when in vertical position. RG Rubber gasket system prevents; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. PITURE WEIGT LSS FETURES Ventilated Non-Ventilated ID 1036.EE ID 1035.EE 75 kg. E600 L E RG Ø 820 Ø 675 Ø 600 105 ID 1036.ED ID 1035.ED 56 kg. D400 L E RG Ø 820 Ø 675 Ø 600 105 ID 1036.E ID 1035.E 52 kg. 250 L E RG Ø 820 Ø 675 Ø 600 105 ID 1036.MED ID 1035.MED P2 56 kg. D400 ML E RG Ø 820 Ø 675 Ø 600 105 ID 1036.ME ID 1035.ME P2 52 kg. 250 ML E RG Ø 820 Ø 675 Ø 600 105 L : utomatic Locking ML : Manual Locking E : Easy inged RG : Rubber Gasket
ircular Manhole over ID 1035.SD - EN 124 Standard, lass 250, D400, E600 - Single hinged cover to 115 - Easy opening with a special wrench - EPDM Gasket - Ventilated / Non-Ventilated ID 1035.MSD P2 Ventilated L utomatic opening-closing locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized personnel use. The locking mechanism is optionally integrated into the cover, it won t become deformed and is highly durable. The Lock can be easily unlocked using a special wrench. RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. S With single joint hinged system allows the cover to be opened 115 which ensures a comfortable and safe working environment, issues such as the cover falling on working personnel won t be happened anymore. PITURE WEIGT LSS FETURES Ventilated Non-Ventilated ID 1036.SE ID 1035.SE 75 kg. E600 L P RG Ø 820 Ø 675 Ø 600 105 ID 1036.SD ID 1035.SD 56 kg. D400 L P RG Ø 820 Ø 675 Ø 600 105 ID 1036.S ID 1035.S 52 kg. 250 L P RG Ø 820 Ø 675 Ø 600 105 ID 1036.MSD ID 1035.MSD P2 56 kg. 250 ML P RG Ø 820 Ø 675 Ø 600 105 ID 1036.MS ID 1035.MS P2 52 kg. 250 ML P RG Ø 820 Ø 675 Ø 600 105 L : utomatic Locking ML : Manual Locking S : Single inged RG : Rubber Gasket
ircular Manhole over - EN 124 Standard, lass B125, 250, D400 - Single hinged cover to 115 - Easy opening with a special wrench - EPDM Gasket - Ventilated / Non-Ventilated ID 1050.80.D2 ID 1050.100.D2 ID 1057.60.D2 ID 1051.100.D1 P2 P3 P4 L utomatic opening-closing locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized personnel use. The locking mechanism is optionally integrated into the cover, it won t become deformed and is highly durable. The Lock can be easily unlocked using a special wrench. S With single joint hinged system allows the cover to be opened 115 which is safety for the workers. RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. The groove is cleaned by using the lathe machine. PITURE WEIGT LSS FETURES Ventilated Non-Ventilated ID 1050.100.D2 ID 1051.100.D2 P2 77 kg. D400 L S RG Ø 820 Ø 695 Ø 600 100 ID 1050.80.D2 ID 1051.80.D2 63 kg. D400 L S RG Ø 805 Ø 695 Ø 600 80 ID 1054.80.D2 ID 1055.80.D2 54 kg. 250 L S RG Ø 805 Ø 695 Ø 600 80 ID 1056.80.D2 ID 1056.80.D2 52 kg. B125 L S RG Ø 805 Ø 695 Ø 600 80 ID 1056.60.D2 ID 1057.60.D2 P3 46 kg. B125 L S RG Ø 805 Ø 695 Ø 600 60 ID 1050.100.D1 ID 1051.100.D1 P4 80 kg. D400 L S RG Ø 820 Ø 695 Ø 600 100 L : utomatic Locking S : Single inged RG : Rubber Gasket
ircular Manhole over - EN 124 Standard, lass D400 - Double hinged cover to 180 - Easy opening with a special wrench - EPDM Gasket - Ventilated / Non-Ventilated ID 1021 ID 1031 ID 1021.KK ID 1021.KK.150 ID 1021.150 P5 P3 P2 P5 L utomatic opening-closing locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized personnel use. The locking mechanism is optionally integrated into the cover, it won t become deformed and is highly durable. The Lock can be easily unlocked using a special wrench. D With double bolts joint hinged system allows the cover to be opened 180 which ensures a comfortable and safe working environment, issues such as the cover falling on working personnel won t be happened anymore. ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. The groove is cleaned by using the lathe machine. PITURE WEIGT LSS FETURES Ventilated Non-Ventilated ID 1021.KK ID 1020.KK P3 88 kg. D400 L D RG Ø 810 Ø 695 Ø 600 90 ID 1021.KK.150 ID 1020.KK.150 P2 88 kg. D400 L D RG Ø 810 Ø 695 Ø 600 150 ID 1021 ID 1020 88 kg. D400 ML D RG Ø 810 Ø 695 Ø 600 90 ID 1021.150 ID 1020.150 P4 88 kg. D400 ML D RG Ø 810 Ø 695 Ø 600 150 ID 1030 ID 1031 P5 62 kg. D400 ML D RG Ø 730 Ø 615 Ø 540 90 L : utomatic Locking ML : Manual Locking D : Double inged RG : Rubber Gasket
ircular Manhole over With Square Frame - EN 124 Standard, lass B125, 250, D400 - Single hinged cover to 115 - Double hinged cover to 180 - Easy opening with a special wrench - EPDM Gasket - Ventilated / Non-Ventilated ID 1022 P2 ID 1050K B ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. The groove is cleaned by using the lathe machine. (Figure ), P2 (Figure B) L utomatic opening-closing locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized personnel use. The locking mechanism is optionally integrated into the cover, it won t become deformed and is highly durable. The Lock can be easily unlocked using a special wrench. D With double bolts joint hinged system allows the cover to be opened 180 which ensures a comfortable and safe working environment, issues such as the cover falling on working personnel won t be happened anymore. S With single joint hinged system allows the cover to be opened 115 which is safety for the workers. X PITURE WEIGT LSS FETURES Ventilated Non-Ventilated ID 1050K ID 1051K 69 kg. D400 L S RG 810 X 810 Ø 695 Ø 600 100 ID 1054K ID 1055K 60 kg. 250 L S RG 810 X 810 Ø 695 Ø 600 100 ID 1056K ID 1057K 58 kg. B125 L S RG 810 X 810 Ø 695 Ø 600 100 ID 1022 ID 1023 P2 92 kg. D400 ML D RG 780 X 780 Ø 695 Ø 600 90 L : utomatic Locking ML : Manual Locking S : Single inged D : Double inged RG : Rubber Gasket
Square and Double Triangular Manhole over - EN 124 Standard, lass B125, D400 - Easy opening ID 1141.150 ID 1140.100 ID 1146.75 ID 1140.42B P2 P3 P4 DT European style double triangular two part cover with located machined seating in frame, allowing the cover to slot in place accurately reducing rocking and movement, increasing safety for vehicular use and pedestrian use. lso reduces noise pollution. This product can also be vented and locked. B The coupling bolt system allows authorised personnel increase 3D safety as the cover can be exhumed in one piece without risk of the cover falling down, the hole created for the location of the manhole or grating. s well as reducing the risk when in installation. PITURE WEIGT LSS FETURES ID 1140.100 P2 62 kg. D400 DT B 672 X 672 616 X 616 600 X 600 100 ID 1141.100 P2 78 kg. D400 DT B 747 X 747 692 X 692 675 X 675 100 ID 1141.150 91 kg. D400 DT B 815 X 815 692 X 692 675 X 675 150 ID 1146.75 P3 56 kg. D400-640 X 640 600 X 600 530 X 530 75 ID 1140.42B P4 40 kg. B125-673 X 673 653 X 653 600 X 600 42 ID 1141.42B P4 46 kg. B125-748 X 748 728 X 728 675 X 675 42 DT : Double Triangular B : oupling Bolt
Square Manhole over - EN 124 Standard, lass 15, B125, 250, D400 - Easy opening ID 1126 ID 1081.L50 P2 ID 1080 P3 ID 1084.01 P5 ID 1090 P4 ID 1135.03 P6 PITURE WEIGT LSS ID 1090 P4 133 kg. 250 1000 X 1000 900 X 900 800 X 800 60 ID 1096 P2 140 kg. B125 1160 X 1160 1077 X 1077 1000 X 1000 50 ID 1081.L150 P2 150 kg. D400 910 X 910 815 X 815 730 X 730 150 ID 1081.L50 P2 116 kg. D400 910 X 910 815 X 815 730 X 730 50 ID 1080 P3 156 kg. D400 750 X 750 685 X 685 600 X 600 100 ID 1081. P4 125 kg. 250 900 X 900 800 X 800 750 X 750 80 ID 1081.D P4 147 kg. D400 900 X 900 800 X 800 750 X 750 80 ID 1085.01 P5 53 kg. 250 580 X 580 470 X 470 400 X 400 85 ID 1084.01 P5 72 kg. 250 700 X 700 580 X 580 510 X 510 85 ID 1125 113 kg. 250 880 X 880 800 X 800 700 X 700 65 ID 1126 72 kg. 250 780 X 780 700 X 700 605 X 605 55 ID 1127 55 kg. 250 650 X 650 600 X 600 505 X 505 55 ID 1128 36 kg. 250 565 X565 500 X 500 410 X 410 45 ID 1129 20 kg. 250 465 X 465 400 X 400 325 X 325 35 ID 1130 14 kg. 250 340 X 340 300 X 300 215 X 215 35 ID 1135.05 P6 20 kg. 15 500 X 500 450 X 450 365 X 365 55 ID 1135.04 P6 15 kg. 15 400 X 400 350 X 350 265 X 265 55 ID 1135.03 P6 8 kg. 15 300 X 300 250 X 250 180 X 180 55
Square Manhole over - EN 124 Standard, lass 250, D400 - Single hinged cover to 115 / Non-inged - Easy opening ID 1084 P5 ID 1084.B P6 ID 1126.2E ID 1128.2D P2 ID 1129.2D P3 ID 1136.Z1 P4 S With single joint hinged system allows ML With the manual locking system, M the cover to be opened 115 which manhole covers can be opened and ensures a comfortable and safe locked by using the special wrench. working environment, issues such as the cover falling on working personnel won t be happened anymore. Rectangular manhole cover filled with concrete material which ensures long lasting performance (For the stone road). PITURE WEIGT LSS FETURES ID 1126.2E 65 kg. D400 ML S 740 X 740 700 X 700 600 X 600 45 ID 1128.2D P2 35 kg. D400 ML S 555 X 555 500 X 500 400 X 400 45 ID 1129.2D P3 27 kg. D400 ML S 400 X 500 395 X 395 320 X 320 45 ID 1136.Z1 P4 10 kg. D400 ML S 275 X 275 260 X 260 200 X 200 30 ID 1085 P5 53 kg. 250 ML 580 X 580 470 X 470 400 X 400 85 ID 1084 P5 72 kg. 250 ML 700 X 700 580 X 580 510 X 510 85 ID 1084.B P6 76 kg. 250 M 700 X 700 580 X 580 510 X 510 85 ML : Manual Locking S : Single inged M : oncrete Material
Rectengular Manhole over Ductile and Grey Iron - EN 124 Standard, lass 250, D400 - Single hinged cover to 115 / Non-inged - Easy opening ID 1091 ID 1091.DK P6 ID 1086 P3 ID 1082 P4 ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. ID 1083 P2 ID 1862 P5 M Rectangular manhole cover filled with concrete material which ensures long lasting performance (For the stone road). X D ID 1040 P7 ID 1861 P8 X 2 X B PITURE WEIGT LSS FETURES B D 2 ID 1082 P4 57 kg. 250 DI 640 740 570 670 500 600 50 ID 1083 P2 35 kg. 250 DI 460 560 400 500 325 425 50 ID 1086 P3 75 kg. 250 DI ML 640 740 570 670 500 600 105 ID 1087 P4 50 kg. 250 DI 560 660 500 600 430 530 50 ID 1860 130 kg. 250 GI 720 900 620 720 540 730 80 ID 1862 P5 86 kg. 250 GI M 620 820 600 800 585 785 60 ID 1091 83 kg. 250 DI 730 900 620 720 530 720 70 ID 1091.DK P6 57 kg. 250 DI 620 810 600 800 490 680 50 ID 1040 P7 233 kg. D400 DI 810 1340 1180-710 1080 110 ID 1861 P8 285 kg. 250 GI 900 1300 820 1240 730 1100 80 ML : Manual Locking M : oncrete Material DI : GI : Grey Iron
Rectangular Manhole over - EN 124 Standard, lass D400 - Double hinged cover to 180 / Non-inged - EPDM Gasket ID 1071 ID 1095.B ID 1095.D ID 1070 B B RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. The groove is cleaned by using the lathe machine. ID 1095.B (Figure ), ID 1095.D (Figure B), ID 1070 - ID 1071 (Figure ) ML M With the manual locking system, manhole covers can be opened and locked by using the special wrench. For big holes longitudinal rectangular manhole covers are set to each other by bolt which can be easily unlocked by special wrench. ID 1095.B (Figure ), ID 1070 - ID 1071 - ID 1095.D (Figure B) Rectangular manhole cover filled with concrete material which ensures long lasting performance. ID 1095.B (Figure ) X D D With double bolts joint hinged system allows the cover to be opened 180 which is safety for the workers. X 2 X B WEIGT LSS B D 2 ID 1070 190 kg. D400 610 1450 1150 1070 595 980 150 ID 1071 255 kg. D400 635 1510 1150 1070 595 980 150 ID 1095.D 270 kg. D400 950 1710 840 1600 740 1500 80 ID 1095.B 240 kg. D400 936 1696 836 1596 740 1500 80 ML : Manual Locking D : Double inged M : oncrete Material RG : Rubber Gasket
irport Manhole overs Ductile and Grey Iron ID 1350 - EN 124 Standard, lass F 900 - Single hinged cover to 115 / Non-inged - EPDM Gasket - Ventilated / Non-Ventilated ID 1370 ID 1015K ID 1015.100.D2 P2 P4 P3 L utomatic opening - closing With handles help the S With single joint hinged system RG Rubber gasket system prevents ; locking system integrated into the cover. Easily Lockable due to the self locking feature. Providing full security against an unauthorized cover to be opened and closed by the working personnel allows the cover to be opened 115 which is safety for the workers. Noise pollution. lso, it prevents the gasket from becoming loose from the using, provides firm installation for placing the grating personnel use. appropriately. The groove is cleaned by using the lathe machine. DR3 DR2 DR1 X D X D X X 2 X B X 2 Non-Ventilated Ventilated PI WEIGT LSS FETURES DRW B D 2 ID 1350-350 kg. F900 GI DR1 700 900 395 625 260 470 97 ID 1350.S2-190 kg. F900 DI DR1 700 900 395 625 260 470 97 ID 1370 - P2 495 kg. F900 GI DR2 Ø1250 - Ø860 Ø800 Ø740 Ø1000 255 ID 1016.100.D2 ID 1015.100.D2 P3 105 kg. F900 DI L S RG DR3 Ø820 - Ø695 - Ø600-100 ID 1016K ID 1015K P4 97 kg. F900 DI L S RG DR3 810X810 - Ø695 - Ø600-100 L : utomatic Locking S : Single inged RG : Rubber Gasket : andles DI : GI : Grey Iron
Water Valve Box and Gas Lids Ductile and Grey Iron - EN 124 Standard, lass B125, D400 - Vertical and horizental opening ID 1240 ID 1930 ML With the manual locking system, manhole covers can be opened and locked by using the special wrench. ID 1280 ID 1910 RG Rubber gasket system prevents ; Noise pollution, water leakage, and gas smell (in case of unventilated products). lso, it prevents the gasket from becoming loose from the using, and provides firm installation for placing the cover appropriately. The groove is cleaned by using the lathe machine. ID 1920 ID 1940 DR1 DR2 V The bolt is attached to the frame and the cover which enables the cover to be opened 360. X D X 2 X B WEIGT LSS FETURES DRWING B D 2 ID 1910 9 kg. B125 GI V DR1 Ø 245 - Ø 170 - Ø 150-210 ID 1920 13 kg. B125 GI V DR1 Ø 270 - Ø 190 - Ø 130-275 ID 1930 6 kg. B125 GI V DR1 Ø 170 - Ø 120 - Ø 75-250 ID 1240 37 kg. D400 DI V DR1 Ø 475 - Ø 357 - Ø 285-210 ID 1280 29 kg. D400 DI ML DR1 475 X 475 - Ø 357 - Ø 285-90 ID 1940 24 kg. B125 DI V DR2 320 425 260 355 275 370 257 ML : Manual Locking V : Vertical and orizental opening RG : Rubber Gasket DI : GI : Grey Iron