1. accessories forklift jack...1.1-1 forklift stand...1.1-2 chain cutter...1.1-3 test equipment...1.1-4 tools...1.1-7 assortment box...1.1-9 battery connector...1.1-11 battery cable...1.1-20 forklift attachment...1.1-22 battery charger...1.1-23 back up alarm...1.1-31 horn...1.1-35 mirror...1.1-37 work light...1.1-39 combi light...1.1-43 rotating light...1.1-49 strobe light...1.1-51 oil & lubricant...1.1-53 load wheels...1.1-56 drive wheel...1.1-59 stabilizing wheel...1.1-67 polyurethane wheel...1.1-69 pallettruck wheel...1.1-70 pallettruck & wheel...1.1-71 gasspring...1.1-79 paint...1.1-83 paint accesories...1.1-85 sealants...1.1-88 safe tred...1.1-89 forklift seat...1.1-91
notes
forklift jacks 05604001 05604004 alligator al4000 forklift jack 4ton EXCLUSIVE ALLIGATOR STEEL FORKLIFT JACK, DESIGNED FOR USE ON FORKLIFT TRUCKS MAX LOAD 4000KG MINIMUM HEIGHT 60-68MM LIFT HEIGHT 420MM WIDTH 200MM WEIGHT 31KG 24 MONTHS WARRANTY FORKLIFT JACK 4 TON MAX LOAD 4000KG MINIMUM HEIGHT 66MM LIFT HEIGHT 410MM WEIGHT 32KG 2 MONTHS WARRANTY 05604005 67154585 forklift jack 4ton (5ton on pump unit) MAX LOAD 4000KG MAX LOAD on pump unit 5000KG MINIMUM HEIGHT 66-415MM LIFT HEIGHT 413-725MM WEIGHT 45KG 2 MONTHS WARRANTY forklift jack 7ton max. load 7000kg min. height 66mm lift height 435mm weight 57kg 2 months warranty 1.1-1
forklift jacks / forklift stands 200947 200948 JACK 5TON JACK 10TON COMPACT AND STABLE CAN BE USED IN ANY POSITION HOUSING REVOLVE 360 LOWERING SPEED CAN BE ADJUSTED PROTECTED AGAINST OVERLOADING pump lever is removable COMPACT AND STABLE CAN BE USED IN ANY POSITION HOUSING REVOLVE 360 LOWERING SPEED CAN BE ADJUSTED PROTECTED AGAINST OVERLOADING pump lever is removable MAX LOAD 5000KG lift range foot 25-230 lift range head 368-573 max lever force 38kg weight 25kg MAX LOAD 10000KG lift range foot 30-260 lift range head 420-650 max lever force 40kg weight 35kg 201327 FORKLIFT STANDS JACK 25TON COMPACT AND STABLE CAN BE USED IN ANY POSITION HOUSING REVOLVE 360 LOWERING SPEED CAN BE ADJUSTED PROTECTED AGAINST OVERLOADING pump lever is removable MAX LOAD 4500KG 05604150 AL150 HEIGHT 150/200mm 05604200 AL200 HEIGHT 200/250/300mm MAX LOAD 25000KG lift range foot 58-273 lift range head 505-720 max lever force 40kg weight 102kg 05604300 AL300 HEIGHT 300/350/400mm 1.1-2
c h a i n c u t t e r ALCATRAZ CHAIN CUTTEr SPECIAL DESIGNED TOOL FOR CUTTING CHAIN ON LENGHT WHEN CHAIN NEEDS TO BE FIXED ON LENGHTH THE ALCATRAZ IS THE BEST TOOL TO CUT CHAIN QUICKLY AND SAFELY EACH ALCATRAZ WILL BE DELIVERED WITH ONE SET OF TOOLS FOR ONE TYPE OF CHAIN AT CHOICE COMPLETE SET IS AVAILABLE AS WELL ASK US FOR YOUR DISCOUNT! ALCATRAZ CHAIN CUTTER UP TO 2 INCH 6x6 08011000 ALCATRAZ CHAIN CUTTER EXTRA LONG UP TO 2 INCH 8x8 08012000 BLOCK ADJUSTER FOR LONG version 08012001 REPLACEMENT PARTS SPRING 08014000 PIN FRAME 08014002 PUMP HANDLE 08014004 BUllet 08004000 BULLET HOLDER 08004002 PIN HOLDER SCREW 08004006 Chain type Pin PIN HOLDER Block AL 4XX 3,5x40 mm 08002000 08003000 1/2 08001000 AL 5XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003002 5/8 08001002 AL 6XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003002 3/4 08001004 AL 8XX 6x60 mm 08002006 08003004 1 08001006 AL10XX 8x100 mm 08002010 08003006 1 1/4 08001008 BL 4XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003002 1/2 08001000 BL 5XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003002 5/8 08001002 BL 6XX 6x60 mm 08002006 08003004 3/4 08001004 BL 8XX 8x60 mm / 8x100 mm 08002008 / 08002010 08003006 1 08001006 BL10XX 8x100 mm 08002010 08003008 1 1/4 08001008 BL1234 & BL1246 12x80 mm 08002012 08003010 1 1/2 08001010 BL1266 & BL1288 12,5x100 mm / 12,5x135 mm 08002014 / 08002016 08003012 1 1/2 08001010 BL14XX 12,5x100 mm 08002014 08003012 1 3/4 08001012 BL1644 12,5x135 mm 08002016 08003012 2 08001014 BL1666 & BL1688 12,5x100 mm / 12,5x160 mm 08002014 / 08002018 08003012 2 08001014 LL10XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003014 5/8 08001002 LL12XX 4x40 mm / 4x60 mm 08002002 / 08002004 08003014 3/4 08001004 LL16XX 8x100 mm 08002010 08003006 1 08001006 LL24XX 12,5x100 mm / 135 mm / 160 mm 08002014 / 2016 / 2018 08003012 1 1/2 08001010 LINDE CHAIN 8x100mm 08002020 08003008 LINDE 08001016 1.1-3
test equipment MICO quadrigages MICO quadrigages are pressure testing devices for hydraulic, air,and vacuum systems. Perform 4 gauge functions Read in lbs/in2(psig) and kg/cm 2 (bar) Case is dust and moisture resistant Compact for toolbox storage Includes bleeder screw and convenient hanger Compatible with most hydraulic fluids MICO QUADRIGAGE standard 09011030 MICO QUADRIGAGE GLYCERIN FILLED 09011015 ITK-1 IMPCO TEST KIT 05601005 TEST KIT FOR TROUBLESHOOTING IMPCO SYSTEMS. INCLUDES 0-160 PSI GAUGE 0-5 PSID GAUGE 0-10 W.C. (H2O) GAUGE G2-2 LEVER GAUGE ASSORTED FITTINGS HOSE INSTRUCTIONS MANUAL TOOL KIT FOR AISiN convertors 05601010 1.1-4
test equipment MULTIMETEr Part# 05601300 Digital clamp and multimeter 3 3/4 Digits compact clamp and multimeter for measuring ampere as well as DC & AC voltage Basis Accouracy 0.5% DC Voltage 400mV/4/40/400 +- 0.5% 40mV600V/+- 8% AC Voltage 4/40/400V +- 0.8% 40mV/400mV/600V DC Current 400A +- 2% 600A +- 2.5% AC Curren 400A +- 2% 600A +- 2.5% Resistance 400 ω/4/40/400k ω/4m ω +-1% 40Mω +-2% Capacitance 4nF/4/40uF +- 5% 40nF +-3% 400nF/4/40uF +-2% 4000uF +-20% Frequency 10Hz - 10MHz +- 0.1% Duty Cycle 0.1% - 99.9% +- 2.5% Temperature 0 C - 40 C Incl. Temperature probe, test lead, protective cover and manual (Dutch, english, german, french and swedisch) starter tester WITH COMPLETE CABLE SET Part# 05601009 With the new Starter Circuit Tester, testing starters on 12V and 24V systems couldn t be easier. Hook the tester up to your starter, solenoid, and battery positions and let the unit do all the work. The Sidekick measures battery charge; positive, negative, and switch circuit drop; and provides the users with either a green light (good) or a red light (bad) feedback. handyman TESTEr Part# 05601200 CARRYING CASE part# 05601201 The Handyman Component Tester represents a giant step forward in portable test equipment. It enables you to test SCRs, Diodes, Capacitors, Transistors, Contactor Drivers, Snubbers, Suppressors and more with a level of confidence never before possible with a VOM (multimeter) alone. How many times have you seen a component test OK with a VOM, but found that it breaks down when full voltage is applied? Combining the Handyman with your VOM (multimeter) creates an even more powerful troubleshooting tool.. 1.1-5
test equipment GE EV100/200 LOGIC HANDSET This is a multifunctional G.E. Handset to be used with the LX, ZX, and SX series of G.E. solidstate controls. The unit consists of a handset with LED display, keyboard for data entry, an eight-foot interface cable to plug into the EV100, and a carrying case. GE EV100/200 LOGIC handset 05601100 8 FOOT CABLE 8 PIN PLUg 05601101 8 FOOT CABLE 14 PIN PLUg 05601102 CURTIS HANDHELD PROGRAMMER 05601000 The Curtis Model 1311 LP Handheld Programmer simplifies the programming, testing, and diagnosing of Curtis Speed Controllers and Auxiliary Devices. The programmer provides a simple and intuitive interface to Curtis products for testing, diagnostics, and parameter adjustments. Features: Compatible with all Curtis speed controllers and auxiliary devices Backward compatible to the Curtis Model 1037 Programmer Easy menu navigation with clear and intuitive parameter organization Inc/dec key for real-time adjustment of parameters Read and clear fault history, monitor real-time data, and perform tests Bookmark keys to facilitate fast swapping between three user selected menus Detail screen shows units, min/ max ranges, and bargraph Allows cloning of parameter settings between controllers Graphic LCD can display up to seven lines of information Restricted data is controlled by four access levels: OEM, Dealer, Service, and User Cable options to interface with all Curtis controllers: Molex, Conxall, and RJ11 CURTIS HANDHELD PROGRAMMER 05601000 CONXALL CABLE 05601001 RJ11 CABLE 05601002 MOLEX CABLE 05601003 1.1-6
t o o l s 05601027 BATTERY TESTER 05601011 ACCU HYDRO METER 06101000 FORK WEAR CALIPER 06051500 FB CHAIN WEAR GAUGE 05601007 CHAIN WEAR SCALE 05601012 HAND CRIMPING TOOL 05601013 HAND CABLE CUTTER OIL FILTER WRENCH 60-73 MM 05601020 73-83 MM 05601021 87-95 MM 05601022 102-111 MM 05601023 05601024 OIL FILTER WRENCH CAM 61-95 MM 05601025 OIL FILTER WRENCH SPIDER 61-121 MM 1.1-7
t o o l s 05601026 OIL FILTER WRENCH SELF ADJUST 60-152 MM 05601029 FLEXIBLE SCREWDRIVER 7 MM 05601030 FLEXIBLE SCREWDRIVER 7 MM LONG VERSION 05601031 TOOL BLADE FUSE & TESTER 05601028 TOOL FOR FLEET MARKING 1.1-8