www.hafeleindia.com www.hafeleindia.com NEW ADDITIONS : INTRODUCING TWO NEW GLASS DOOR HINGE MODELS
Häfele reintroduces its Range of Glass Fittings from the Startec Series which includes Häfele s Glass Door Hardware Range, Saddle Plate for DCL 21 Door Closer and Glass Door Sealing Systems! 1. Häfele s Glass Door Hardware Range includes three design series - Linear, Arc and Nova. The products in each series are uniformly aligned in aesthetics and design to provide you with the most suitable combination of hinges, a lockset and a strike patch (or plate) for a given glass door application. Whether you want straight lines, or smooth curves or just a stellar looking combination, you are likely to find your best bet from within this range! This communication introduces two new glass door hinges recently added to the Linear and Arc Series respectively. 2. Installing a door closer on a frameless toughened glass door is now possible with Häfele s Saddle Plate. The saddle plate acts as a carrier for Häfele s StarTec DCL 21 Door Closer which gets attached to the plate with the help of fixing screws. The saddle plate does not require any pre-drilling on the glass; it simply clamps onto it. 3. Häfele s Range of Glass Door Sealing Systems radiates a minimalistic feel and a contemporary touch to your interiors as well as exteriors. As a range, these sealing systems are highly suited to combat unwanted infiltrations like noise, fire & smoke, weather & energy and external particles or organisms. TOPICS 1. GLASS DOOR HARDWARE Features & Benefits 5-6 Mounting of Hinges 7 Linear Series 8-10 Arc Series 11-13 Nova Series 14-16 Ordering Information 17 2. SADDLE PLATE FOR DCL 21 DOOR CLOSER Product & Technical Specifications 19 3. GLASS DOOR SEALING SYSTEMS Perimeter Sealing System 21 Sliding Door Sealing System / Glass Wall Sealing System 22 Door Bottom Sealing System 23 Ordering Information 24
GLASS DOOR HARDWARE RANGE LINEAR SERIES: Hinges Strike Patch* Strike Plate # Lock New Addition ARC SERIES: Hinges Strike Patch* Strike Plate # Lock New Addition NOVA SERIES: Hinges Strike Patch* Strike Plate # Lock * Strike Patch : For glass application # Strike Plate : For application with a wooden frame SADDLE PLATE SEALING SYSTEMS Note: Only for application on toughened glass door
Glass Door Hardware
Two-way Installation of Hinges: Selected glass door hinges from the range can be installed in two ways: into the frame for an inset application or onto the frame for an overlay / offset application. DIN Left & Right Compatible: All the fittings from the range are non-handed. They can be installed for DIN Left as well as DIN Right applications thereby facilitating order procurement, delivery and on-site handling and installation. DIN Right DIN Left For Glass Thicknesses from 8 to 12 mm: 8 12 mm All the fittings from this range are suitable for glass doors and panels with thicknesses ranging from 8 to 12 mm. Contemporaries in the market with similar fittings can only accommodate thicknesses up to 10 mm. For Glass Weight up to 90 kgs: Up to 90 kgs All glass door hinges (including the two newly introduced hinges) from the range are suitable for glass doors weighing up to 90 kgs (in case of a three-hinge application). This enables the possibility of installing heavy-duty glass doors especially required in case of commercial projects.
Made of Stainless Steel Grade 304: This range of Glass Fittings is made of stainless steel providing a sturdy and durable application. With a Grade rating of 304, this range can sustain corrosive environments especially in the case of for exterior applications (like entry doors). SS Grade 304 Seamless Hairline Finish: The entire range comes with a fine and seamless hairline finish, making way for an aesthetically pleasing combination of fittings for your glass doors. Locks with Computerized Cylinders & 5 Keys The glass door locks from this range come with sophisticated computerized cylinders and a bunch of 5 keys per lockset. Computerized cylinders provide a higher level of security than normal cylinders, minimizing the rick of break-ins. Cycle Tested to Last: This range of glass fittings has been cycle tested to last: the hinges have been tested to last for 100,000 cycles and the locks for 300,000 cycles; assuring hassle-free operations and durable functionality in use.
1. TWO HINGE APPLICATION : For door height up to 2.5 m and door weight up to 60 kgs a H: Height of the door = up to 2500 mm (2.5 m) a: Distance from top and bottom = 200 mm H a 2. THREE HINGE APPLICATION : For door height up to 3 m and door weight up to 90 kgs a b H: Height of the door = up to 3000 mm (3 m) a: Distance from top and bottom = 200 mm b: Distance between top and middle hinge = (H 400)/3 H c: Distance between middle and bottom hinge = (H 400)*2/3 c a Example: If the door height (H) = 2920mm, then: b = (2920 400)/3 = 840 mm c = (2920 400)*2/3=1680 mm
Hinges Strike Patch* Strike Plate # Lock New Addition * Strike Patch : For glass application # Strike Plate : For application with a wooden frame Hinges Material: Stainless Steel Grade 304 Finish: Glass Specifications: Thickness: Weight (2 hinges): Weight (3 hinges): Height (2 hinges): Stainless Steel Matt 8 to 12 mm (min) 30kg (max) 60kg (min) 30kg (max) 90kg (max) 2500 mm 981.50.164 Height (3 hinges): (max) 3000 mm Width (2 or 3 hinges): (min) 600 mm (max) 1000 mm 981.75.020 Lock and Strike Patch / Plate Material: Stainless Steel Grade 304 981.50.170 Casting: Finish: Latching function: Deadbolt: Cylinder: Zinc Alloy Stainless Steel Matt Yes No Computerized No. of Keys: 5 Glass Specifications: 981.50.175 981.50.17501 Thickness: 8 to 12 mm
1. GLASS TO GLASS APPLICATION 1 1 Hinge X 2 or 3 981.50.164 OR Hinge X 2 or 3 981.75.020 3 2 2 3 + Lock X 1 981.50.170 + Strike Patch X 1 981.50.175 2. GLASS TO WOODEN FRAME APPLICATION 1 1 Hinge X 2 or 3 981.50.164 OR Hinge X 2 or 3 981.75.020 3 2 2 + Lock X 1 981.50.170 + 3 Strike Plate X 1 981.50.17501 Note: Both the hinges from the LINEAR Series can only be installed into the frame/profile for an inset application
HINGE (981.50.164) Inset Application (Mounting into the frame/profile) Hinge Dimensions Glass Cut-out HINGE (981.75.020) Mounting Hinge Dimensions Glass Cut-out Installation LOCK (981.50.170) & STRIKE PATCH (981.50.175) Glass Cut-out for Strike Patch Glass Cut-out for Lock
Hinges Strike Patch* Strike Plate # Lock New Addition * Strike Patch : For glass application # Strike Plate : For application with a wooden frame Hinges Material: Stainless Steel Grade 304 Finish: Glass Specifications: Thickness: Weight (2 hinges): Weight (3 hinges): Height (2 hinges): Stainless Steel Matt 8 to 12 mm (min) 30kg (max) 60kg (min) 30kg (max) 90kg (max) 2500 mm 981.50.163 Height (3 hinges): (max) 3000 mm Width (2 or 3 hinges): (min) 600 mm (max) 1000 mm 981.75.020 Lock and Strike Patch / Plate Material: Stainless Steel Grade 304 981.50.171 Casting: Finish: Latching function: Deadbolt: Cylinder: Zinc Alloy Stainless Steel Matt Yes No Computerized No. of Keys: 5 Glass Specifications: 981.50.176 981.50.17501 Thickness: 8 to 12 mm
1. GLASS TO GLASS APPLICATION 1 1 Hinge X 2 or 3 981.50.163 OR Hinge X 2 or 3 981.75.010 3 2 2 3 + Lock X 1 981.50.171 + Strike Patch X 1 981.50.176 2. GLASS TO WOODEN FRAME APPLICATION 1 1 Hinge X 2 or 3 981.50.163 OR Hinge X 2 or 3 981.75.010 3 2 2 + Lock X 1 981.50.171 + 3 Strike Plate X 1 981.50.17501 Note: Of the two hinges under the ARC Series, Art. No. 981.50.163 can be installed in two ways, i.e. into the frame for an inset application or onto the frame for an overlay / offset application while Art. No. 981.75.010 can only be installed into the frame/profile for an inset application
HINGE (981.50.163) Mounting Option 1: Inset Application (into the frame/profile) Mounting Option 2: Offset Application (onto the frame/profile) Hinge Dimensions Glass Cut-out HINGE (981.75.010) Inset Application (Mounting into the frame/profile) Hinge Dimensions Glass Cut-out Installation LOCK (981.50.171) & STRIKE PATCH (981.50.176) Glass Cut-out for Strike Patch Glass Cut-out for Lock
Hinges Strike Patch* Strike Plate # Lock * Strike Patch : For glass application # Strike Plate : For application with a wooden frame Hinges Material: Stainless Steel Grade 304 Finish: Glass Specifications: Thickness: Weight (2 hinges): Weight (3 hinges): Height (2 hinges): Stainless Steel Matt 8 to 12 mm (min) 30kg (max) 60kg (min) 30kg (max) 90kg (max) 2500 mm 981.50.161 Height (3 hinges): Width (2 or 3 hinges): (max) 3000 mm (min) 600 mm (max) 1000 mm 981.50.162 Lock and Strike Patch / Plate Material: Stainless Steel Grade 304 981.50.172 Casting: Finish: Latching function: Deadbolt: Cylinder: Zinc Alloy Stainless Steel Matt Yes Yes Computerized No. of Keys: 5 Glass Specifications: 981.50.177 981.39.136 Thickness: 8 to 12 mm
1. GLASS TO GLASS APPLICATION 1 1 Hinge X 2 or 3 981.50.161 OR Hinge X 2 or 3 981.50.162 3 2 2 3 + Lock X 1 981.50.172 + Strike Patch X 1 981.50.177 2. GLASS TO WOODEN FRAME APPLICATION 1 1 Hinge X 2 or 3 981.50.161 OR Hinge X 2 or 3 981.50.162 3 2 2 + Lock X 1 981.50.172 + 3 Strike Plate X 1 981.39.136 Note: Both the hinges falling under the NOVA Series, can be installed in two ways, i.e. into the frame for an inset application or onto the frame for an overlay / offset application
HINGE (981.50.161) Mounting Option 1: Inset Application (into the frame/profile) Mounting Option 2: Offset Application (onto the frame/profile) Hinge Dimensions Glass Cut-out HINGE (981.50.162) Mounting Option 1: Inset Application (into the frame/profile) Mounting Option 2: Offset Application (onto the frame/profile) Hinge Dimensions Glass Cut-out LOCK (981.50.172) & STRIKE PATCH (981.50.177) Glass Cut-out for Strike Patch Glass Cut-out for Lock
Article No. Description M.R.P (INR) LINEAR SERIES 981.50.164 Square hinge 3,177/- 981.75.020 Square Hinge [NEW] 2,684/- 981.50.170 Square Lock 7,621/- 981.50.175 Square Strike Patch 2,702/- 981.50.17501 Square Strike Plate 265/- ARC SERIES 981.50.163 Round hinge 4,193/- 981.75.010 Round Hinge [NEW] 2,684/- 981.50.171 Round Lock 7,411/- 981.50.176 Round Strike Patch 2,237/- NOVA SERIES 981.50.161 Hinge 3,429/- 981.50.162 Hinge 3,473/- 981.50.172 Lock 11,939/- 981.50.177 Strike Patch 7,114/- 911.39.136 Strike Plate 932/-
Saddle Plate for DCL 21 Door Closer
107.5 Material: Finish: Glass Specifications: Thickness: Other Specifications: Aluminium Aluminium Anodised 10 mm Compatible with Häfele s StarTec DCL 21 Door Closer; Article No. - 931.84.129 Suitable for DIN right hand and DIN left hand Three point holding for better grip and stability Thick metal surface for increased fastening area & strength Silicon sheets come pre-embedded to enable smoother fixing Easy installation Ordering Information: Article Number: 931.84.90002 MRP (INR) 3,300/- 931.84.90002 TECHNICAL SPECIFICATIONS 29 38.5 Saddle Plate Dimensions Mounting
Glass Door Sealing Systems
GLASS LIP is an adhesive perimetric seal for glass doors and walls of simple and easy fitting. It can be applied with a template which allows a perfect positioning always in the center of the glass. It is a soft transparent seal which can be quickly installed with an high strength transparent adhesive. Application : Hinged glass doors Fixing Type : High strength adhesive seal Article Number: 950.40.00101 Minimum Gap: Maximum Gap: Length: Colour: 2.5 mm 7 mm 3000 mm Transparent Glass Specifications: Thickness: 8 to 14 mm FRAME SEAL is a perimeter seal used to close the gap around the leafs of a glass door, without the use of glues and adhesives and with an immediate installation. It consists of an anodized aluminum profile with anti-vibration soft seals on the inside. The patented system of the seal allows to compensate gaps from a minimum of 4 mm to a maximum of 8 mm. Application : All types of glass doors Fixing Type : Push / Pull on glass Article Number: Minimum Gap: Maximum Gap: Length: Colour: 950.40.00105 (Glass Thickness: 10 mm) 950.40.00106 (Glass Thickness: 12 mm) 4 mm 8 mm 2500 mm Silver Anodised Glass Specifications: Thickness: 10 and 12 mm
GLASS LIP SLIDE is an adhesive seal for sliding glass doors that provides for a simple and quick installation. It consists of a soft transparent seal with an adjustable single lip, which is installed on the fixed part of the sliding door to compensate for the gap created by the moving part. The seal lip can be shortened by each millimeter, by simply tearing off a part of the lip, to meet door gaps from 12 to 30 mm. Application : Hinged glass doors Fixing Type : High strength adhesive seal Article Number: 950.40.00104 Minimum Gap: Maximum Gap: Length: Colour: 12 mm 30 mm 3000 mm Transparent Glass Specifications: Thickness: 8 to 14 mm GLASS TO GLASS sealing system holds together two glass walls without the use of glues and adhesives. GLASS TO FLOOR is a system created for fixing glass walls to the floor. Both these systems consist of an anodized aluminum profile with antivibration soft seals on the inside that strongly clutch the glass walls. These systems also provide for better aesthetics and ease of assembly. Application : All types of glass walls Fixing Type : Push / Pull on glass, with high-strength double-sided adhesive tape between aluminium and floor Article Number: Length: Colour: GLASS TO GLASS: 950.40.00107 (Glass Thickness: 10 mm) 950.40.00108 (Glass Thickness: 12 mm) GLASS TO FLOOR: 950.40.00109 (Glass Thickness: 10 mm) 950.40.00110 (Glass Thickness: 12 mm) 2500 mm Silver Anodised Glass Specifications: Thickness: 10 and 12 mm
BRUSH SEAL is a door bottom seal which closes the gap between the glass door bottom and the floor. It can be installed on every traditional hinged door and also on pivot doors with concealed floor spring. The seal adapts to the floor spring plate with its self-levelling spring mechanism. The fine hair of the brush allow to create a barrier against dust and insects without interfering with the functional operation of the door, even when the floor is not perfectly smooth. Application : All types of glass doors Fixing Type : High strength double-sided adhesive tape Article Number: 950.40.00121 Length: Colour: Components: 1030 mm Silver Anodised Primary Aluminium Profile with Polypropylene Brush Seal Secondary Aluminium Profile Rear Cover End Caps LOCKER BRUSH FOR PATCH is a simple way to close the gap between the glass door and the floor when the glass door is equipped with patch fittings. Application : All types of glass walls Fixing Type : Push / Pull on glass, with high-strength double-sided adhesive tape between aluminium and floor Article Number: 950.40.00112 Length: Colour: Seal: 200 mm Silver Anodised Silicone Oil-impregnated Polypropylene Brush Seal
Article No. Description M.R.P (INR) Perimeter Sealing Systems 950.40.00101 GLASS LIP 3,436/- 950.40.00105 FRAME SEAL; Glass Thickness: 10 mm 7,405/- 950.40.00106 FRAME SEAL; Glass Thickness: 12 mm 7,405/- Sliding Door Sealing System 950.40.00104 GLASS LIP SLIDE 4,532/- Glass Wall Sealing Systems 950.40.00107 GLASS TO GLASS; Glass Thickness: 10 mm 7,229/- 950.40.00108 GLASS TO GLASS; Glass Thickness: 12 mm 7,447/- 950.40.00109 GLASS TO FLOOR; Glass Thickness: 10 mm 7,229/- 950.40.00110 GLASS TO FLOOR; Glass Thickness: 12 mm 7,447/- Door Bottom Sealing Systems 950.40.00121 BRUSH SEAL 4,481/- 950.40.00112 LOCKER BRUSH FOR PATCH 1,147/- Template and Cleaning Wipes 950.40.00113 GLASS CLEANING WIPES 197/- 950.40.00114 GLASS LIP TEMPLATE 908/-
Häfele India Private Limited Office No. 3, Building A, BETA, I Think Techno Campus, Off J.V.L.R, Opp. Kanjurmarg East, Mumbai 400 042. Tel.: 022 6142 6100 Fax: 022 6702 0531 New Delhi Kolkata Chennai Hyderabad Bangalore Pune Ahmedabad Srilanka Bangladesh Nepal Toll Free Customer Care No.:1800 266 6667 SMS HAFELE to 56070 customercare@hafeleindia.com www.hafeleindia.com