PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 All Stainless Steel All In Stock www.gibsonstainless.com Price List 114 7/01/08 1/1/16 PRICE LIST 118
Contents Item...Page Made in USA...3 2 Piece Pipe Clamps...18 90º Angles...19 Beam Clamps, 2100 Series...15 Beam Clamps, 2000 Series...15 Channel Nuts...18 Conduit...4 Conduit Bodies...6,7 Conduit Elbows...5 Conduit Hangers...14 Conduit Nipples...4 Couplings...5 Device Boxes...8 Device Box Covers...9 EYS Sealing Fittings...9 Fender Washers...21 Flat Washers...21 GUA Series Conduit Bodies...10 Ground Rod Clamps...22 Grounding Hubs...11 Grounding Liquidtight Connectors...12 Grounding Locknuts...11 Grounding Rods...22 Hex Head Cap Screws...20 Hex Nuts...20 Hubs...11 Junior Top Beam Clamps...15 Liquidtight Connectors...12 Lock Washers...20 Locknuts...11 One Hole Straps...14 Parallel Clamps...15 Plates...19 Plugs...13 Post Bases...18 Reducing Bushings...13 Right Angle Beam Clamps for Strut...18 Right Angle Clamps...15 Rod Couplings...19 Slotted Machine Screws...20 Spring Nuts...18 Square Washers...19 Strut...18 Threaded Rod...19 Three Piece Couplings...4 Two Hole Straps...14 U-bolts...16,17 U-bolt Plates...16,17 Wedge Anchors...21 2 Terms & Conditions All orders must be placed through a distributor authorized by Gibson Stainless & Specialty, Inc. PAYMENT TERMS: 2/10, NET 30 MINIMUM ORDER: $50 LIST ORDERS: All orders are subject to acceptance by Gibson Stainless & Specialty, Inc. GUARANTEE: All Gibson Stainless & Specialty, Inc. products are guaranteed to be free of defects in material and workmanship for a period of one year from shipment date. Guarantee shall be for replacement of parts only. No further warranties exist, expressed or implied. FREIGHT POLICY: Conduit: Consult Factory Fittings: $175 LIST UPS Ground or common carrier, within the 48 contiguous states. Combined Conduit and Fittings: Consult Factory RETURN POLICY: Returns may not be made without prior factory approval and issuance of a RGA. Restocking charges will apply.
Gibson Stainless & Specialty, Inc. Made in USA Policy Gibson Stainless & Specialty, Inc. is an American company, 100% American owned. From the very beginning, Gibson Stainless has used castings from only American foundries. All of our original products, from beam clamps to right angle clamps to conduit bodies, have always been cast in the USA. Machining, finishing, assembly and packaging are done at Gibson Stainless by Gibson Stainless employees. With the loss of manufacturing jobs in the United States, it has been very difficult at times to find American made component parts such as the small screws that hold the lid onto a conduit body; very difficult but not impossible. Gibson Stainless is now making a concerted effort to produce 100% Made in USA parts; not just the casting, but also all component parts such as nuts and screws. We have made great strides and many of our products are now 100% Made in USA. This new price sheet shows the 100% Made in USA products by Gibson Stainless. It also shows the products which have some foreign component and those that are direct imports. We will continue our efforts to either manufacture or source from domestic manufacturers those smaller component items which, in the past, have been foreign products. Body Please refer to the following key or contact the factory for specific country of origin details: 100% Made in USA Product is manufactured in the United States from American-Made material. Gasket Manufactured in USA Product is manufactured in the United States; however, raw material may or may not be of U.S. origin. May Contain Imported Component Product is manufactured in the United States but may contain a component that is an import. The product s manufacturing costs in the United States are greater than 50% of the cost of all of its components. Cover Screws Please note: any changes in a product s country of origin will be updated immediately on our website www.gibsonstainless.com. 3
Conduit Inside Outside Wall Length w/o Weight/ Number Size Threads Diameter Diameter Thickness Coupling Stick (lbs.) Material Price ($) CND50-1 2 in. 14 0.62 0.84 0.11 9-11- 1 4 8 316 SS * CND75-3 4 in. 14 0.82 1.05 0.11 9-11- 1 4 11 316 SS * CND100-1 in. 11 1 2 1.05 1.32 0.13 9-11 16 316 SS * CND125-1- 1 4 in. 11 1 2 1.38 1.66 0.14 9-11 22 316 SS * CND150-1- 1 2 in. 11 1 2 1.61 1.90 0.15 9-11 26 316 SS * CND200-2 in. 11 1 2 2.07 2.38 0.15 9-11 35 316 SS * CND250-2- 1 2 in. 8 2.49 2.88 0.19 9-10 1 2 55 316 SS * CND300-3 in. 8 3.09 3.50 0.21 9-10 1 2 72 316 SS * CND400-4 in. 8 4.05 4.50 0.23 9-10 1 4 100 316 SS * Inside Outside Wall Length w/o Weight/ Number Size Threads Diameter Diameter Thickness Coupling Stick (lbs.) Material Price ($) CND50-304SS - 1 2 in. 14 0.62 0.84 0.11 9-11- 1 4 8 304 SS * CND75-304SS - 3 4 in. 14 0.82 1.05 0.11 9-11- 1 4 11 304 SS * CND100-304SS -1 in. 11 1 2 1.05 1.32 0.13 9-11 16 304 SS * CND125-304SS -1-1 4 in. 11 1 2 1.38 1.66 0.14 9-11 22 304 SS * CND150-304SS -1-1 2 in. 11 1 2 1.61 1.90 0.15 9-11 26 304 SS * CND200-304SS -2 in. 11 1 2 2.07 2.38 0.15 9-11 35 304 SS * CND250-304SS -2-1 2 in. 8 2.49 2.88 0.19 9-10 1 2 55 304 SS * CND300-304SS -3 in. 8 3.09 3.50 0.21 9-10 1 2 72 304 SS * CND400-304SS -4 in. 8 4.05 4.50 0.23 9-10 1 4 100 304 SS * *Consult rep. or factory for pricing. Custom lengths available; consult factory. Sold as 10 lengths with coupling Sold as 10 lengths with coupling Conduit Nipple Three Piece Coupling Length Conduit Number Size Close 2 2-1 2 3 3-1 2 4 5 6 8 10 12 NIP50x - 1 2 in. 1.13 NIP75x - 3 4 in. 1.38 Consult rep. or factory for pricing. NIP100x -1 in. 1.50 Custom lengths available; consult factory. NIP125x 1-1 4 in. 1.75 NIP150x 1-1 2 in. 1.75 2 x close nipples are 2 long. NIP200x -2 in. 2.00 N/A* Length Conduit Number Size Close 2 2-1 2 3 3-1 2 4 5 6 8 10 12 NIP50x -304SS - 1 2 in. 1.13 NIP75x -304SS - 3 4 in. 1.38 Consult rep. or factory for pricing. NIP100x -304SS -1 in. 1.50 Custom lengths available; consult factory. NIP125x -304SS 1-1 4 in. 1.75 NIP150x -304SS 1-1 2 in. 1.75 2 x close nipples are 2 long. NIP200x -304SS -2 in. 2.00 N/A* NOTE: Format of full part number is part number x length. Example: NIP75x 2-304SS Weight/ Price/ Number Size 100 (lbs.) Material Each ($) TPC75 3 4 in. 34 316 SS 80.00 TPC100 1 in. 32 316 SS 89.00 4
90º Standard Radius Elbow Weight/ Centerline Number Size Each (lbs.) Offset A Straight End B Radius C Material Price ($) ELB50-1 2 in. 1 6.50 2.12 4.00 316 SS * ELB75-3 4 in. 1 7.25 2.75 4.50 316 SS * ELB100-1 in. 2 8.63 2.88 5.75 316 SS * ELB125 1-1 4 in. 3 10.75 3.25 7.50 316 SS * ELB150 1-1 2 in. 4 11.63 3.38 8.25 316 SS * ELB200-2 in. 6 13.31 3.81 9.50 316 SS * ELB250-2- 1 2 in. 13 16.50 5.75 10.50 316 SS * ELB300-3 in. 19 18.75 5.75 13.00 316 SS * ELB400-4 in. 31 23.18 7.96 16.00 316 SS * Weight/ Centerline Number Size Each (lbs.) Offset A Straight End B Radius C Material Price ($) ELB50-304SS - 1 2 in. 1 6.50 2.12 4.00 304 SS * ELB75-304SS - 3 4 in. 1 7.25 2.75 4.50 304 SS * ELB100-304SS -1 in. 2 8.63 2.88 5.75 304 SS * ELB125-304SS 1-1 4 in. 3 10.75 3.25 7.50 304 SS * ELB150-304SS 1-1 2 in. 4 11.63 3.38 8.25 304 SS * ELB200-304SS -2 in. 6 13.31 3.81 9.50 304 SS * ELB250-304SS -2-1 2 in. 13 16.50 5.75 10.50 304 SS * ELB300-304SS -3 in. 19 18.75 5.75 13.00 304 SS * ELB400-304SS -4 in. 31 23.18 7.96 16.00 304 SS * *Consult rep. or factory for pricing. Coupling Weight/ Price/ Number Size 100 (lbs.) Material Each ($) CPL50 1 / 2 in. 15 316 SS 25.00 CPL75 3 / 4 in. 18 316 SS 30.00 CPL100 1 in. 32 316 SS 47.00 CPL125 1-1 / 4 in. 41 316 SS 64.00 CPL150 1-1 / 2 in. 58 316 SS 79.00 CPL200 2 in. 77 316 SS 97.00 CPL250 2-1 / 2 in. 179 316 SS 153.00 CPL300 3 in. 245 316 SS 245.00 CPL400 4 in. 309 316 SS 378.00 Weight/ Price/ Number Size 100 (lbs.) Material Each ($) CPL50-304SS 1 / 2 in. 15 304 SS 20.00 CPL75-304SS 3 / 4 in. 18 304 SS 24.00 CPL100-304SS 1 in. 32 304 SS 37.00 CPL125-304SS 1-1 / 4 in. 41 304 SS 52.00 CPL150-304SS 1-1 / 2 in. 58 304 SS 58.00 CPL200-304SS 2 in. 77 304 SS 79.00 CPL250-304SS 2-1 / 2 in. 179 304 SS 136.00 CPL300-304SS 3 in. 245 304 SS 213.00 CPL400-304SS 4 in. 309 304 SS 311.00 5
Conduit Bodies LB Conduit Body T Conduit Body Number Size Each (lbs.) Style Material Each ($) 7050LB 1 2 in. 1 Form 8 CF8M/316 SS 123.00 7075LB 3 4 in. 2 Form 8 CF8M/316 SS 132.00 7100LB 1 in. 3 Form 8 CF8M/316 SS 144.00 7125LB 1-1 4 in. 5 Form 8 CF8M/316 SS 194.00 7150LB 1-1 2 in. 5 Form 8 CF8M/316 SS 257.00 7200LB 2 in. 9 Form 8 CF8M/316 SS 322.00 7300LB 3 in. 18 Form 8 CF8M/316 SS 810.00 7400LB 4 in. 28 Form 8 CF8M/316 SS 978.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. Number Size Each (lbs.) Style Material Each ($) 7050T 1 2 in. 2 Form 8 CF8M/316 SS 136.00 7075T 3 4 in. 3 Form 8 CF8M/316 SS 149.00 7100T 1 in. 4 Form 8 CF8M/316 SS 170.00 7125T 1-1 4 in. 5 Form 8 CF8M/316 SS 262.00 7150T 1-1 2 in. 6 Form 8 CF8M/316 SS 277.00 7200T 2 in. 9 Form 8 CF8M/316 SS 338.00 7300T 3 in. 19 Form 8 CF8M/316 SS 840.00 7400T 4 in. 29 Form 8 CF8M/316 SS 992.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. TB Conduit Body X Conduit Body NEW PRODUCT Number Size Each (lbs.) Style Material Each ($) 7075TB 3 4 in. 3 Form 8 CF8M/316 SS 148.00 7100TB 1 in. 3 Form 8 CF8M/316 SS 167.00 7125TB 1-1 4 in. 5 Form 8 CF8M/316 SS 262.00 7150TB 1-1 2 in. 6 Form 8 CF8M/316 SS 294.00 7200TB 2 in. 9 Form 8 CF8M/316 SS 354.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. Number Size Each (lbs.) Style Material Each ($) 7075X 3 4 in. 3 Form 8 CF8M/316 SS 162.00 7100X 1 in. 4 Form 8 CF8M/316 SS 186.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. 6
Conduit Bodies C Conduit Body Number Size Each (lbs.) Style Material Each ($) 7050C 1 2 in. 1 Form 8 CF8M/316 SS 127.00 7075C 3 4 in. 2 Form 8 CF8M/316 SS 135.00 7100C 1 in. 3 Form 8 CF8M/316 SS 149.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. LR Conduit Body Number Size Each (lbs.) Style Material Each ($) 7075LR 3 4 in. 2 Form 8 CF8M/316 SS 129.00 7100LR 1 in. 3 Form 8 CF8M/316 SS 145.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. LL Conduit Body Number Size Each (lbs.) Style Material Each ($) 7075LL 3 4 in. 2 Form 8 CF8M/316 SS 129.00 7100LL 1 in. 3 Form 8 CF8M/316 SS 145.00 NOTE: Supplied complete with 316 SS stamped cover, neoprene gasket and 316 SS screws. 7
Device Boxes FD FDC Number Size Each (lbs.) Material Each($) FD75 3 / 4 in. 3 CF8M/316 SS 157.00 NOTE: Internal grounding screw, mounting feet standard. FDA Number Size Each (lbs.) Material Each($) FDC75 3 / 4 in. 3 CF8M/316 SS 165.00 NOTE: Internal grounding screw, mounting feet standard. FDS Number Size Each (lbs.) Material Each($) FDA75 3 / 4 in. 3 CF8M/316 SS 159.00 NOTE: Internal grounding screw standard. Number Size Each (lbs.) Material Each($) FDS75 3 / 4 in. 3 CF8M/316 SS 165.00 NOTE: Internal grounding screw standard. FDX FDDX Number Size Each (lbs.) Material Each($) FDX75 3 / 4 in. 4 CF8M/316 SS 169.00 NOTE: Internal grounding screw standard. 8 Number Size Each (lbs.) Material Each($) FDDX75 3 / 4 in. 5 CF8M/316 SS 226.00 NOTE: Internal grounding screw, mounting feet standard.
Device Box Covers BLANK SWITCH RECEPTACLE DOUBLE-GANG BLANK GIBSON STAINLESS F S F D NOTE: Wet locations when used with gasket and Gibson Stainless device box. NOTE: Dry locations only. NOTE: Dry locations only. NOTE: Wet locations when used with gasket and Gibson Stainless device box. Price/ Number Description Material Each ($) 7000-BF Blank Formed Cover 316 SS 24.00 7000-BC Blank Cast Cover CF8M/316 SS 45.00 7000-SF Switch Cover 316 SS 24.00 7000-RF Receptacle Cover 316 SS 24.00 7000-BF2 Double-Gang Blank Formed Cover 316 SS 40.00 7000-BC2 Double-Gang Blank Cast Cover CF8M/316 SS 75.00 NOTE: Supplied complete with gasket and 316 SS screws. Product may contain imported component. Body 100% Made in USA; screws, gasket may or may not be of U.S. origin. EYS Sealing Fitting Conduit Price/ Number Size Material Each($) EYS75 3 4 in. CF8M/316 SS 130.00 EYS100 1 in. CF8M/316 SS 140.00 9
GUA Series Conduit Bodies www.gibsonstainless.com GUAC GUAT Number Size Each (lbs.) Material Each($) GUAC75 3 4 in. 4 CF8M/316 SS 219.00 GUAC100 1 in. 4 CF8M/316 SS 230.00 NOTE: Supplied complete with a cover and neoprene o-ring. Number Size Each (lbs.) Material Each($) GUAT75 3 4 in. 4 CF8M/316 SS 244.00 GUAT100 1 in. 5 CF8M/316 SS 251.00 NOTE: Supplied complete with a cover and neoprene o-ring. GUAX GUAB Number Size Each (lbs.) Material Each($) GUAX75 3 4 in. 4 CF8M/316 SS 255.00 GUAX100 1 in. 5 CF8M/316 SS 269.00 NOTE: Supplied complete with a cover and neoprene o-ring. Number Size Each (lbs.) Material Each($) GUAB75 3 4 in. 4 CF8M/316 SS 229.00 GUAB100 1 in. 4 CF8M/316 SS 242.00 NOTE: Supplied complete with a cover and neoprene o-ring. GUAL Designed for Hazardous Locations CL I, DIV 1, Groups C, D CL II, DIV 1, Groups E, F, G CL III, NEMA 4X Rated Number Size Each (lbs.) Material Each($) GUAL75 3 4 in. 4 CF8M/316 SS 237.00 GUAL100 1 in. 4 CF8M/316 SS 240.00 NOTE: Supplied complete with a cover and neoprene o-ring. 10
Hub Number Size 100 (lbs.) Material Each ($) 7050-HUB 1 2 in. 20 CF8M/316 SS 56.00 7075-HUB 3 4 in. 31 CF8M/316 SS 59.00 7100-HUB 1 in. 45 CF8M/316 SS 68.00 7125-HUB 1-1 4 in. 71 CF8M (316 SS) 85.00 7150-HUB 1-1 2 in. 85 CF8M (316 SS) 92.00 7200-HUB 2 in. 112 CF8M (316 SS) 106.00 7250-HUB 2-1 2 in. 190 CF8M (316 SS) 162.00 7300-HUB 3 in. 331 CF8M (316 SS) 191.00 7400-HUB 4 in. 453 CF8M (316 SS) 238.00 Grounding Hub Number Size 100 (lbs.) Material Each ($) 7050-G-HUB 1 2 in. 22 CF8M/316 SS 68.00 7075-G-HUB 3 4 in. 34 CF8M/316 SS 74.00 7100-G-HUB 1 in. 49 CF8M/316 SS 82.00 7125-G-HUB 1-1 4 in. 73 CF8M/316 SS 97.00 7150-G-HUB 1-1 2 in. 87 CF8M/316 SS 105.00 7200-G-HUB 2 in. 114 CF8M/316 SS 124.00 7250-G-HUB 2-1 2 in. 192 CF8M/316 SS 180.00 7300-G-HUB 3 in. 334 CF8M/316 SS 201.00 7400-G-HUB 4 in. 459 CF8M/316 SS 249.00 Locknut Conduit Weight/ Number Size 100 (lbs.) Material Price/100 ($) 8050 1 2 in. 2 316 SS 664.00 8075 3 4 in. 4 316 SS 707.00 8100 1 in. 6 316 SS 748.00 8125 1-1 4 in. 10 CF8M (316 SS) 1,394.00 8150 1-1 2 in. 14 CF8M (316 SS) 1,547.00 8200 2 in. 19 CF8M (316 SS) 1,800.00 8250 2-1 2 in. 24 CF8M (316 SS) 4,460.00 8300 3 in. 41 CF8M (316 SS) 5,535.00 8400 4 in. 60 CF8M (316 SS) 7,175.00 Grounding Locknut Conduit Weight/ Number Size 100 (lbs.) Material Price/100 ($) 8050-G 1 2 in. 3 CF8M/316 SS 1,640.00 8075-G 3 4 in. 7 CF8M/316 SS 1,743.00 8100-G 1 in. 8 CF8M/316 SS 1,948.00 8125-G 1-1 4 in. 13 CF8M/316 SS 2,050.00 8150-G 1-1 2 in. 16 CF8M/316 SS 2,152.00 8200-G 2 in. 21 CF8M/316 SS 2,563.00 8250-G 2-1 2 in. 26 CF8M/316 SS 4,930.00 8300-G 3 in. 45 CF8M/316 SS 6,355.00 8400-G 4 in. 67 CF8M/316 SS 8,200.00 11
Liquidtight Connectors Straight Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50 1 2 in. 25 CF8M/316 SS 57.00 LT75 3 4 in. 35 CF8M/316 SS 68.00 LT100 1 in. 51 CF8M/316 SS 76.00 45 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-45 1 2 in. 40 CF8M/316 SS 64.00 LT75-45 3 4 in. 55 CF8M/316 SS 77.00 LT100-45 1 in. 77 CF8M/316 SS 86.00 90 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-90 1 2 in. 45 CF8M/316 SS 66.00 LT75-90 3 4 in. 61 CF8M/316 SS 79.00 LT100-90 1 in. 86 CF8M/316 SS 88.00 Grounding Liquidtight Connectors Grounding Straight Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-G 1 2 in. 27 CF8M/316 SS 71.00 LT75-G 3 4 in. 38 CF8M/316 SS 84.00 LT100-G 1 in. 55 CF8M/316 SS 92.00 Grounding 45 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-45-G 1 2 in. 42 CF8M/316 SS 78.00 LT75-45-G 3 4 in. 58 CF8M/316 SS 93.00 LT100-45-G 1 in. 81 CF8M/316 SS 102.00 Grounding 90 o Liquidtight Connector Conduit Weight/ Number Size 100 (lbs.) Material Price/Each ($) LT50-90-G 1 2 in. 47 CF8M/316 SS 80.00 LT75-90-G 3 4 in. 64 CF8M/316 SS 95.00 LT100-90-G 1 in. 90 CF8M/316 SS 104.00 12 NOTE: All liquidtight connectors contain Type 316 SS inside ferrule. This helps provide extra corrosion resistance on inside of fitting.
Hex Head Reducing Bushing Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500RB 1 2 x 1 4 8 316 SS 674.00 7500RB 1 2 x 3 8 7 316 SS 718.00 7500RB 3 4 x 1 4 16 316 SS 934.00 7500RB 3 4 x 3 8 15 316 SS 979.00 7500RB 3 4 x 1 2 12 316 SS 1,024.00 7500RB 1 x 3 8 22 316 SS 1,144.00 7500RB 1 x 1 2 20 316 SS 1,184.00 7500RB 1 x 3 4 16 316 SS 1,473.00 7500RB 1-1 4 x 1 2 41 316 SS 2,066.00 7500RB 1-1 4 x 3 4 38 316 SS 2,186.00 7500RB 1-1 4 x 1 31 316 SS 2,222.00 7500RB 1-1 2 x 1 2 70 316 SS 2,287.00 7500RB 1-1 2 x 3 4 67 316 SS 2,307.00 7500RB 1-1 2 x 1 61 316 SS 2,341.00 7500RB 1-1 2 x 1-1 4 47 316 SS 2,378.00 7500RB 2 x 1 2 92 316 SS 4,379.00 7500RB 2 x 3 4 84 316 SS 4,593.00 7500RB 2 x 1 79 316 SS 4,764.00 Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500RB 2 x 1-1 4 79 316 SS 4,866.00 7500RB 2 x 1-1 2 69 316 SS 4,999.00 7500RB 2-1 2 x 1 2 170 316 SS 5,670.00 7500RB 2-1 2 x 3 4 163 316 SS 5,972.00 7500RB 2-1 2 x 1 172 316 SS 6,079.00 7500RB 2-1 2 x 1-1 4 155 316 SS 6,184.00 7500RB 2-1 2 x 1-1 2 145 316 SS 6,235.00 7500RB 2-1 2 x 2 117 316 SS 6,286.00 7500RB 3 x 1 279 316 SS 7,847.00 7500RB 3 x 1-1 4 264 316 SS 8,119.00 7500RB 3 x 1-1 2 247 316 SS 8,174.00 7500RB 3 x 2 219 316 SS 8,217.00 7500RB 3 x 2-1 2 183 316 SS 8,371.00 7500RB 4 x 1-1 4 415 316 SS 10,390.00 7500RB 4 x 1-1 2 423 316 SS 10,488.00 7500RB 4 x 2 441 316 SS 10,586.00 7500RB 4 x 2-1 2 428 316 SS 10,684.00 7500RB 4 x 3 353 316 SS 10,831.00 Face Reducing Bushing Import NOTE: Full part number is 7500RB followed by the size. Example: 7500RB - 3 4 x 1 2 Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500FB 3 4 x 1 2 7 316 SS 2,500.00 7500FB 1 x 1 2 20 316 SS 3,500.00 7500FB 1 x 3 4 12 316 SS 3,400.00 7500FB 1-1 2 x 1 2 59 316 SS 5,600.00 7500FB 1-1 2 x 3 4 50 316 SS 5,500.00 7500FB 1-1 2 x 1 37 316 SS 5,400.00 Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7500FB 1-1 2 x 1-1 4 15 316 SS 5,300.00 7500FB 2 x 1 2 103 316 SS 7,500.00 7500FB 2 x 3 4 95 316 SS 7,400.00 7500FB 2 x 1 82 316 SS 7,300.00 7500FB 2 x 1-1 4 59 316 SS 7,200.00 7500FB 2 x 1-1 2 40 316 SS 7,100.00 NOTE: Full part number is 7500FB followed by the size. Example: 7500FB - 3 4 x 1 2 NEW PRODUCT Hex Head Plug Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7038P 3 8 in. 10 316 SS 358.00 7050P 1 2 in. 12 316 SS 537.00 7075P 3 4 in. 17 316 SS 797.00 7100P 1 in. 26 316 SS 997.00 7125P 1-1 4 in. 47 316 SS 1,419.00 7150P 1-1 2 in. 65 316 SS 1,749.00 7200P 2 in. 99 316 SS 3,922.00 7250P 2-1 2 in. 155 316 SS 6,333.00 7300P 3 in. 244 316 SS 8,148.00 7400P 4 in. 430 316 SS 12,919.00 Socket Plug Weight/ Number Size 100 (lbs.) Material Price/100 ($) 7075SP 3 4 in. 9 316 SS 2,108.00 7100SP 1 in. 18 316 SS 2,350.00 Import 13
One Hole Strap Pipe / Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) 3050 1 2 in. 4 316 SS 106.00 3075 3 4 in. 5 316 SS 148.00 3100 1 in. 8 316 SS 216.00 3125 1-1 4 in. 12 316 SS 303.00 3150 1-1 2 in. 15 316 SS 408.00 3200 2 in. 24 316 SS 503.00 3250 2-1 2 in. 43 316 SS 1,009.00 3300 3 in. 47 316 SS 1,354.00 3350 3-1 2 in. 66 316 SS 1,778.00 3400 4 in. 72 316 SS 1,973.00 Clamp back spacers available; consult factory. Two Hole Strap Pipe / Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) 3038-2 3 8 in. 2 316 SS 57.00 3050-2 1 2 in. 2 316 SS 68.00 3075-2 3 4 in. 3 316 SS 91.00 3100-2 1 in. 4 316 SS 157.00 3125-2 1-1 4 in. 6 316 SS 213.00 3150-2 1-1 2 in. 9 316 SS 349.00 3200-2 2 in. 11 316 SS 393.00 3250-2 2-1 2 in. 16 316 SS 438.00 3300-2 3 in. 20 316 SS 641.00 3350-2 3-1 2 in. 26 316 SS 787.00 3400-2 4 in. 29 316 SS 1,024.00 Conduit Hanger Number Size 100 (lbs.) Material 100 ($) 6050 1 2 in. 7 316 SS 243.00 6075 3 4 in. 8 316 SS 261.00 6100 1 in. 9 316 SS 288.00 6125 1-1 4 in. 11 316 SS 350.00 6150 1-1 2 in. 17 316 SS 416.00 6200 2 in. 23 316 SS 472.00 6250 2-1 2 in. 33 316 SS 700.00 6300 3 in. 38 316 SS 852.00 6400 4 in. 48 316 SS 1,202.00 NOTES: 1 2-2 sizes are supplied complete with Type 316 SS slotted machine screw and nut. 2-1 2, 3 and 4 sizes are supplied complete with Type 316 SS carriage bolt and nut. Product may contain imported component. Body 100% Made in USA; bolt and hex nut may or may not be of U.S. origin. 14
Right Angle Clamp Parallel Clamp Pipe/ Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) 1050 1 2 in. 34 CF8M/316 SS 1,495.00 1075 3 4 in. 35 CF8M/316 SS 1,630.00 1100 1 in. 43 CF8M/316 SS 1,662.00 1125 1-1 4 in. 51 CF8M/316 SS 2,089.00 1150 1-1 2 in. 61 CF8M/316 SS 2,427.00 1200 2 in. 96 CF8M/316 SS 3,141.00 1250 2-1 2 in. 125 CF8M/316 SS 3,765.00 1300 3 in. 146 CF8M/316 SS 4,361.00 1350 3-1 2 in. 166 CF8M/316 SS 4,639.00 1400 4 in. 177 CF8M/316 SS 5,015.00 1600 6 in. 351 CF8M/316 SS 12,834.00 NOTE: Design allows for pipe diameter variations; will fit PVC-coated conduit. Product may contain imported component. Saddle 100% Made in USA; hex nuts, raw material for U-bolt may or may not be of U.S. origin. Pipe/ Weight/ Price/ Number Rigid Conduit Size 100 (lbs.) Material 100 ($) 4075 3 4 in. 58 CF8M/316 SS 3,052.00 4100 1 in. 60 CF8M/316 SS 3,302.00 NOTE: Design allows for pipe diameter variations; will fit PVC-coated conduit. Product may contain imported component. Body 100% Made in USA; hex nut and bolt may or may not be of U.S. origin. 2000 Series Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.)* 100 (lbs.) Material 100 ($) 2001 1 4 in. 150 25 CF8M/316 SS 1,297.00 2003 3 8 in. 750 87 CF8M/316 SS 2,521.00 2004 1 2 in. 1,100 148 CF8M/316 SS 3,695.00 *Based on upright installation, as shown from bottom attachment hole. PART #2001 Numbers 2003, 2004: Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin. 2100 Series Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.)* 100 (lbs.) Material 100 ($) 2103 3 8 in. 400 51 316 SS 1,516.00 2104 1 2 in. 600 55 316 SS 1,795.00 *Based on upright installation, as shown from bottom attachment hole. Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin. Junior Top Beam Clamp Load Weight/ Price/ Number Size Rating (lbs.) 100 (lbs.) Material 100 ($) JTB375 3 8 in. 750 33 CF8M/316 SS 1,822.00 JTB500 1 2 in. 750 32 CF8M/316 SS 1,884.00 Product may contain imported component. Body 100% Made in USA; set screw, jam nut may or may not be of U.S. origin. 15
U-Bolt Pipe/ Load Weight/ Price/ Number Rigid Conduit Size Rating (lbs.) 100 (lbs.) Material 100 ($) 0050 1 2 in. 950 12 316 SS 431.00 0075 3 4 in. 950 13 316 SS 440.00 0100 1 in. 950 15 316 SS 453.00 0125 1-1 4 in. 950 15 316 SS 468.00 0150 1-1 2 in. 950 17 316 SS 485.00 0200 2 in. 1250 30 316 SS 671.00 0250 2-1 2 in. 1250 33 316 SS 721.00 0300 3 in. 1250 36 316 SS 773.00 0350 3-1 2 in. 1250 40 316 SS 815.00 0400 4 in. 1250 44 316 SS 871.00 0500 5 in. 2250 102 316 SS 1,905.00 0600 6 in. 3550 199 316 SS 3,540.00 0800 8 in. 3550 236 316 SS 5,666.00 01000 10 in. 5250 412 316 SS 8,886.00 01200 12 in. 7500 680 316 SS 13,217.00 01400 14 in. 7500 690 316 SS 20,322.00 01600 16 in. 7500 760 316 SS 28,882.00 01800 18 in. 9900 1150 316 SS 41,989.00 02000 20 in. 9900 1250 316 SS 58,302.00 Dimensions (In.) Number A B C Size & Pitch 0050 2.41 1.50 0.94 5 16-18 0075 2.73 1.50 1.15 5 16-18 0100 3.04 1.50 1.41 5 16-18 0125 3.16 1.50 1.76 5 16-18 0150 3.48 1.50 2.00 5 16-18 0200 4.30 1.75 2.50 3 8-16 0250 4.80 1.75 2.99 3 8-16 0300 5.36 1.75 3.62 3 8-16 0350 5.80 1.75 4.11 3 8-16 0400 6.50 1.75 4.61 3 8-16 0500 7.75 3.00 5.63 1 2-13 0600 9.50 3.75 6.75 5 8-11 0800 11.50 3.75 8.75 5 8-11 01000 13.81 4.00 10.88 3 4-10 01200 16.00 4.25 12.88 7 8-9 01400 17.32 4.25 14.13 7 8-9 01600 19.31 4.25 16.13 7 8-9 01800 21.69 4.75 18.13 1-8 02000 23.69 4.75 20.13 1-8 NOTES: Sizes 1 2-4 supplied complete with one nut on each leg. Sizes 5-20 supplied complete with two nuts on each leg. Product may contain imported component. U-Bolt manufactured in USA; hex nuts and raw material for U-bolt may or may not be of U.S. origin. U-Bolt Plate 16 Nominal Use w/ Gibson Weight/ Price/ Number Size Number 100 (lbs.) Material 100 ($) UBP0050 1 / 2 in. 0050 3 316 SS 270.00 UBP0075 3 / 4 in. 0075 3 316 SS 276.00 UBP0100 1 in. 0100 4 316 SS 280.00 UBP0125 1-1 / 4 in. 0125 4 316 SS 288.00 UBP0150 1-1 / 2 in. 0150 5 316 SS 295.00 UBP0200 2 in. 0200 12 316 SS 408.00 UBP0250 2-1 / 2 in. 0250 16 316 SS 436.00 UBP0300 3 in. 0300 17 316 SS 474.00 UBP0350 3-1 / 2 in. 0350 19 316 SS 505.00 UBP0400 4 in. 0400 19 316 SS 533.00 UBP0500 5 in. 0500 33 316 SS 1,257.00 UBP0600 6 in. 0600 104 316 SS 2,233.00 UBP0800 8 in. 0800 119 316 SS 2,694.00 UBP01000 10 in. 01000 151 316 SS 3,746.00 UBP01200 12 in. 01200 300 316 SS 5,178.00 UBP01400 14 in. 01400 324 316 SS 7,622.00 UBP01600 16 in. 01600 380 316 SS 7,903.00 UBP01800 18 in. 01800 432 316 SS 9,077.00 UBP02000 20 in. 02000 500 316 SS 9,804.00
U-Bolt (Figure 137 Style) Pipe/ Load Weight/ Price/ Number Rigid Conduit Rating (lbs.) 100 (lbs.) Material 100 ($) 0050-137 - 1 2 in. 485 9 316 SS 309.00 0075-137 - 3 4 in. 485 10 316 SS 322.00 0100-137 1 in. 485 10 316 SS 329.00 0125-137 1-1 4 in. 1220 26 316 SS 511.00 0150-137 1-1 2 in. 1220 28 316 SS 740.00 0200-137 2 in. 1220 30 316 SS 789.00 0250-137 2-1 2 in. 2260 66 316 SS 1,433.00 0300-137 3 in. 2260 72 316 SS 1,590.00 0350-137 3-1 2 in. 2260 77 316 SS 1,791.00 0400-137 4 in. 2260 83 316 SS 1,846.00 NOTE: Sizes are supplied complete with one nut on each leg. Product may contain imported component. U-Bolt manufactured in USA; hex nuts and raw material for U-bolt may or may not be of U.S. origin. Dimensions (In.) Number A B C Size & Pitch 0050-137 3.22 2.13 0.94 1 4-20 0075-137 3.31 2.13 1.13 1 4-20 0100-137 3.44 2.13 1.38 1 4-20 0125-137 3.72 2.13 1.69 3 8-16 0150-137 4.00 2.50 2.00 3 8-16 0200-137 4.47 2.50 2.44 3 8-16 0250-137 5.22 3.00 2.94 1 2-13 0300-137 5.78 3.00 3.56 1 2-13 0350-137 6.28 3.00 4.06 1 2-13 0400-137 6.78 3.00 4.56 1 2-13 U-Bolt Plate (Figure 137 Style) Nominal Use w/ Gibson Weight/ Price/ Number Size Number 100 (lbs.) Material 100 ($) P50-137 1 2 in. 0050-137 3 316 SS 269.00 P75-137 3 4 in. 0075-137 4 316 SS 276.00 P100-137 1 in. 0100-137 4 316 SS 280.00 P125-137 1-1 4 in. 0125-137 10 316 SS 361.00 P150-137 1-1 2 in. 0150-137 12 316 SS 367.00 P200-137 2 in. 0200-137 12 316 SS 408.00 P250-137 2-1 2 in. 0250-137 20 316 SS 546.00 P300-137 3 in. 0300-137 23 316 SS 592.00 P350-137 3-1 2 in. 0350-137 25 316 SS 628.00 P400-137 4 in. 0400-137 28 316 SS 664.00 17
Strut Number Size Gauge Description Weight/Each (lbs.) Material Price ($) 5000SH-316SS 1-5 8 x 1-5 8 in. 12 Slotted Holes 18 316 SS * 5000SH-304SS 1-5 8 x 1-5 8 in. 12 Slotted Holes 18 304 SS * *Consult rep. or factory for pricing. Custom lengths available; consult factory. Spring Nut (316 SS with 302 SS Spring) Spring Nut: with spring Weight/ Number Size 100 (lbs.) Price/100 ($) 5911 1 4 in. 10 310.00 5912 5 16 in. 9 310.00 5913 3 8 in. 9 310.00 5914 1 2 in. 11 384.00 5915 5 8 in. 12 968.00 5916 3 4 in. 13 1,062.00 2 Piece Pipe / Conduit Clamp Sold as 10 lengths Channel Nut: without spring Weight/ Number Size 100 (lbs.) Price/100 ($) 5901 1 4 in. 10 279.00 5902 5 16 in. 9 279.00 5903 3 8 in. 9 279.00 5904 1 2 in. 11 348.00 5905 5 8 in. 12 908.00 5906 3 4 in. 13 968.00 Pipe/Rigid Weight/ Number Conduit Size 100 (lbs.) Material Price/100 ($) 5050 1 2 in. 12 316 SS 372.00 5075 3 4 in. 15 316 SS 387.00 5100 1 in. 17 316 SS 409.00 5125 1-1 4 in. 18 316 SS 449.00 5150 1-1 2 in. 21 316 SS 557.00 5200 2 in. 23 316 SS 661.00 5250 2-1 2 in. 31 316 SS 740.00 5300 3 in. 33 316 SS 893.00 5350 3-1 2 in. 38 316 SS 1,108.00 Pipe/Rigid Weight/ Number Conduit Size 100 (lbs.) Material Price/100 ($) 5400 4 in. 41 316 SS 1,290.00 5500 5 in. 50 316 SS 1,575.00 5600 6 in. 58 316 SS 1,970.00 5800 8 in. 70 316 SS 2,379.00 Product may contain imported component. Body 100% Made in USA; hex nut and bolt may or may not be of U.S. origin. NOTES: Sizes 1 / 2-2 supplied complete with 1 / 4 X 1 hex head bolt and nut. Sizes 2-1 / 2-4 supplied complete with 5 / 16 X 1 hex head bolt and nut. Sizes 5-8 supplied complete with 5 / 16 X 1-1 / 4 hex head bolt and nut. Right Angle Beam Clamp Load Weight/ Number Strut Size Rating (lbs.) 100 (lbs.) Material Price/Each ($) 5990 1-5 8 x 1-5 8 in. 1000 90 316 SS 21.00 5990L 1-5 8 x 3-1 4 in. 1000 97 316 SS 27.00 Product may contain imported component. Saddle 100% Made in USA; hex nuts and raw material for square U-bolt may or may not be of U.S. origin. Post Bases Standard 45 o Offset Wall Mount Double Standard Narrow Weight/ Price/ Number Description Each (lbs.) Material Each ($) 5990PB1 Standard 4 316 SS 120.00 5990PB2 45º Offset 4 316 SS 120.00 5990PB3 Wall Mount 3 316 SS 96.00 5990PB4 Double 5 316 SS 140.00 5990PB5 Standard Narrow 4 316 SS 96.00 18
Threaded Rod Thread Threads Design Length Weight/ Price/. Number Size Per Inch Load (lbs.) (ft.) Each (lbs.) Material Each ($) 9701 1 / 4 in. 20 150 6 1 316 SS 16.00 9703 3 / 8 in. 16 610 6 2 316 SS 31.00 9703-10 3 / 8 in. 16 610 10 3 316 SS 50.00 9704 1 / 2 in. 13 1,130 6 4 316 SS 63.00 9704-10 1 / 2 in. 13 1,130 10 6 316 SS 103.00 NOTE: Orders of less than 10 pieces will incur a $10.00 packaging charge. Rod Coupling Thread Threads Design Weight/ Price/ Number Size Per Inch Load (lbs.) 100 (lbs.) Material Each ($) 9711 1 / 4 in. 20 240 2 316 SS 6.00 9713 3 / 8 in. 16 610 4 316 SS 7.00 9714 1 / 2 in. 13 1,130 6 316 SS 9.00 Import Square Washer Rod Hole Weight/ Price/ Number Size Diameter 100 (lbs.) Material 100 ($) 5970-1 / 4 1 / 4 in. 11 / 32 in. 17 316 SS 339.00 5970-3 / 8 3 / 8 in. 7 / 16 in. 17 316 SS 339.00 5970-1 / 2 1 / 2 in. 9 / 16 in. 16 316 SS 339.00 5970-5 / 8 5 / 8 in. 11 / 16 in. 16 316 SS 453.00 5970-3 / 4 3 / 4 in. 13 / 16 in. 16 316 SS 453.00 90 Angles Hole Weight/ Price/ Number Description Diameter 100 (lbs.) Material 100 ($) 5971 2-Hole 9 / 16 in. 36 316 SS 1,216.00 5974 3-Hole 9 / 16 in. 59 316 SS 1,758.00 5973 4-Hole 9 / 16 in. 84 316 SS 1,846.00 Plates 3-Hole Flat Angle 4-Hole Flat Angle Cross Plate Tee Plate 4-Hole Splice Plate Hole Weight/ Price/ Number Description Diameter 100 (lbs.) Material 100 ($) 5963 3-Hole Flat Angle 9 / 16 in. 55 316 SS 2,200.00 5964 4-Hole Flat Angle 9 / 16 in. 75 316 SS 2,800.00 5965 Cross Plate 9 / 16 in. 74 316 SS 4,000.00 5969 4-Hole Splice Plate 9 / 16 in. 74 316 SS 2,200.00 5966 Tee Plate 9 / 16 in. 74 316 SS 2,900.00 19
Hardware Hex Head Cap Screw Diameter x Price/ Number Length (In.) Material 100 ($) 9905-1 4 x 3 4 1 4 x 3 4 316 SS 55.00 9905-1 4 x 1 1 4 x 1 316 SS 59.00 9905-1 4 x 1-1 4 1 4 x 1-1 4 316 SS 76.00 9905-1 4 x 1-1 2 1 4 x 1-1 2 316 SS 97.00 9905-1 4 x 2 1 4 x 2 316 SS 120.00 9905-3 8 x 1 2 3 8 x 1 2 316 SS 96.00 9905-3 8 x 3 4 3 8 x 3 4 316 SS 108.00 9905-3 8 x 1 3 8 x 1 316 SS 127.00 9905-3 8 x 1-1 4 3 8 x 1-1 4 316 SS 154.00 9905-3 8 x 1-1 2 3 8 x 1-1 2 316 SS 194.00 9905-3 8 x 2 3 8 x 2 316 SS 238.00 9905-1 2 x 3 4 1 2 x 3 4 316 SS 282.00 Import Diameter x Price/ Number Length (In.) Material 100 ($) 9905-1 2 x 1 1 2 x 1 316 SS 307.00 9905-1 2 x 1-1 4 1 2 x 1-1 4 316 SS 329.00 9905-1 2 x 1-1 2 1 2 x 1-1 2 316 SS 354.00 9905-1 2 x 2 1 2 x 2 316 SS 379.00 Hex Nut Price/ Number Size Pitch Material 100 ($) 9901-1 4 1 4 in. 20 316 SS 34.00 9901-5 / 16 5 / 16 in. 18 316 SS 54.00 9901-3 8 3 8 in. 16 316 SS 63.00 9901-1 2 1 2 in. 13 316 SS 120.00 9901-5 / 8 5 / 8 in. 11 316 SS 208.00 9901-3 / 4 3 / 4 in. 10 316 SS 379.00 9901-7 / 8 7 / 8 in. 9 316 SS 522.00 9901-1 1 in. 8 316 SS 851.00 Import Lock Washer Price/ Number Size Material 100 ($) 9921-1 4 1 4 in. 316 SS 16.00 9921-5 / 16 5 / 16 in. 316 SS 24.00 9921-3 8 3 8 in. 316 SS 32.00 9921-1 2 1 2 in. 316 SS 60.00 9921-5 / 8 5 / 8 in. 316 SS 132.00 Import Slotted Machine Screw Diameter x Price/ Number Length (In.) Material 100 ($) 9905M- 1 4 x 1 1 4 x 1 316 SS 59.00 9905M- 1 4 x 1-1 4 1 4 x 1-1 4 316 SS 76.00 9905M- 1 4 x 1-1 2 1 4 x 1-1 2 316 SS 97.00 9905M- 1 4 x 2 1 4 x 2 316 SS 120.00 Import 20
Hardware Flat Washer Price/ Number Size Material 100 ($) 9920-1 4 1 4 in. 316 SS 37.00 9920-5 / 16 5 / 16 in. 316 SS 44.00 9920-3 8 3 8 in. 316 SS 48.00 9920-1 2 1 2 in. 316 SS 108.00 9920-5 / 8 5 / 8 in. 316 SS 166.00 Import Fender Washer Price/ Number Size Material 100 ($) 9920F- 1 / 4 x 1 1 / 4 x 1 in. 316 SS 51.00 9920F- 1 / 4 x 1-1 / 4 1 / 4 x 1-1 / 4 in. 316 SS 90.00 9920F- 3 / 8 x 1 3 / 8 x 1 in. 316 SS 57.00 9920F- 3 / 8 x 1-1 / 4 3 / 8 x 1-1 / 4 in. 316 SS 71.00 9920F- 1 / 2 x 1-1 / 2 1 / 2 x 1-1 / 2 in. 316 SS 113.00 Import Wedge Anchor Diameter x Price/ Number Length (In.) Material 100 ($) 9400WA- 1 / 4 x 1-3 / 4 1 / 4 x 1-3 / 4 316 SS 254.00 9400WA- 1 / 4 x 2-1 / 4 1 / 4 x 2-1 / 4 316 SS 280.00 9400WA- 1 / 4 x 3-1 / 4 1 / 4 x 3-1 / 4 316 SS 303.00 9400WA- 3 / 8 x 2-1 / 4 3 / 8 x 2-1 / 4 316 SS 408.00 9400WA- 3 / 8 x 3-3 / 4 3 / 8 x 3-3 / 4 316 SS 554.00 9400WA- 3 / 8 x 5 3 / 8 x 5 316 SS 607.00 9400WA- 1 / 2 x 2-3 / 4 1 / 2 x 2-3 / 4 316 SS 758.00 9400WA- 1 / 2 x 3-3 / 4 1 / 2 x 3-3 / 4 316 SS 916.00 9400WA- 1 / 2 x 5-1 / 2 1 / 2 x 5-1 / 2 316 SS 1,254.00 Import 21
Grounding Rod Rod Weight/ Length Number Size Each (lbs.) (ft.) Material Price ($) GR588 5 / 8 in. 9 8 316 SS * GR5810 5 / 8 in. 11 10 316 SS * GR348 3 / 4 in. 12 8 316 SS * GR3410 3 / 4 in. 15 10 316 SS * GR18 1 in. 22 8 316 SS * GR110 1 in. 27 10 316 SS * Rod Weight/ Length Number Size Each (lbs.) (ft.) Material Price ($) GR588-304SS 5 / 8 in. 9 8 304 SS * GR5810-304SS 5 / 8 in. 11 10 304 SS * GR348-304SS 3 / 4 in. 12 8 304 SS * GR3410-304SS 3 / 4 in. 15 10 304 SS * GR18-304SS 1 in. 22 8 304 SS * GR110-304SS 1 in. 27 10 304 SS * *Consult rep. or factory for pricing. NOTE: 304 SS Ground Rods are Ground Rod Clamp Rod Weight/ Number Size 100 (lbs.) Material Price/Each ($) GRC625 5 / 8 in. 13 CF8M/316 SS 10.00 GRC75 3 / 4 in. 14 CF8M/316 SS 11.00 GRC100 1 in. 45 CF8M/316 SS 23.00 Product may contain imported component. Body 100% Made in USA; bolt may or may not be of U.S. origin. 22
Notes 23
High Strength Fast Delivery Reliability Low Maintenance Cost-Effective Corrosion Resistant Customer Service PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 www.gibsonstainless.com