Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502 Packing: 1 or 20 pcs. Rolled hinge, narrow Size A x B mm Barrel Ø C mm Ø Thickness D mm Screw Ø mm Ø No. of drilled holes Material/ 25 x 20.6 0.8 2.0 4 Steel galvanized 54.01.906 Crank: A, straight With riveted pin Crank: A 0 x 22 4.0 0.9 2.0 4 Steel galvanized Packing: 10 or 100 pcs. Stainless steel quality SUS 04 40 x 26 4.5 1.0 2.5 4 Steel galvanized Stainless steel quality SUS 04 50 x 1 5.5 1.2.0 6 Steel galvanized Stainless steel quality SUS 04 60 x 4 6.0 1.4.0 6 Steel galvanized Stainless steel quality SUS 04 80 x 41 7.0 1.5.5 6 Steel galvanized Stainless steel quality SUS 04 54.01.915 54.01.710 54.01.924 54.01.720 54.01.9 54.01.70 54.01.942 54.01.740 54.01.950 54.01.750 FF.7
Rolled hinge, wide Crank: A, straight With riveted pin Crank: A Size A x B mm Barrel Ø C mm Ø Packing: 10 or 100 pcs. Thickness D mm Screw Ø mm Ø No. of drilled holes Material/ 0 x 0 4.0 0.9 2.5 4 Steel chromatized 40 x 40 5.0 0.9 2.5 4 Steel chromatized Stainless steel quality SUS 04 50 x 50 5.5 1.2.0 6 Steel chromatized Stainless steel quality SUS 04 60 x 60 6.0 1.4.0 6 Steel chromatized Stainless steel quality SUS 04 80 x 80 7.0 1.5.5 6 Steel chromatized Stainless steel quality SUS 04 54.0.919 54.0.928 54.0.720 54.0.97 54.0.70 54.0.946 54.0.740 54.0.950 54.0.750 Rolled hinge for folding-sliding doors Size 40 x 0 mm Size 50 x 42 mm Crank: A, straight Version: Rounded flange shape, with riveted pin, with plastic friction bearing Material Steel Packing: 10 or 500 pcs. Material Steel Packing: 1 or 250 pcs. Nickel plated Nickel plated 54.14.709 54.14.914 FF.74
Rolled hinge for folding-sliding doors Hinge side *Establish the pivot by trial mounting Without height adjustment, size 50 x 50 mm If the panels of the sliding folding doors have to be of identical width, the hinge barrel is offset from the centre by the same distance as the raised hinge section. Crank: F F Material Steel Packing: 10 or 250 pcs. Galvanized 54.15.911 Size 50 x 60 mm Crank: F F Material Steel Packing: 1 or 250 pcs. Galvanized 54.15.99 FF.75
Piano hinge for screw fixing Order reference Also available in fixed lengths. Length:,500 mm Manufactured in compliance with DIN 7956 Steel Width open B mm 20 Brass plated 51.01.502 Nickel plated 51.01.708 25 Brass plated 51.01.511 Flange thickness: 0.7 mm (width opening 40 mm: 0.8 mm) Barrel Ø:. mm (width opening 40 mm:.5 mm) Version: Rolled Nickel plated 2 Brass plated 51.01.717 51.01.57 Ø Nickel plated 40 Brass plated 51.01.75 51.01.548 Packing: 1 pc. Brass Flange thickness: 0.8 mm Barrel Ø:.5 mm Version: Rolled Ø Stainless steel, quality SUS 40 Flange thickness: 0.8 mm Barrel Ø:.5 mm Version: Rolled Ø Width open B mm Packing: 1 pc. Packing: 1 pc. 2 Polished Width open B mm 51.0.87 2 51.04.08 FF.76
Piano hinge for screw fixing Aluminium Length:,500 mm Flange thickness: 1.0 mm Barrel Ø:.8 mm Version: Without groove Ø Width open B mm Packing: 1 pc. 2 Bright 51.20.88 Piano hinge for welding on Order reference Also available in fixed lengths. Length:,500 mm Flange thickness: 1.5 mm Barrel Ø: 6.0 mm Version: Rolled, without screw holes Manufactured in compliance with DIN 7956 Steel Ø Width open B mm Packing: 1 pc. 2 Bright 51.0.0 40 51.0.042 FF.77
Stainless steel, quality SUS 40 Version: Weldable, anti-magnetic Width open B mm Packing: 1 pc. 2 51.04.18 40 51.04.147 Rolled hinge, wide Size A x B x C x D mm Packing: 10 or 100 pcs. Material/ 60 x 44 x 8 x 1.6 Stainless steel quality SUS 04 926.22.90 FF.78
Pivot hinge with identical flanges Opening angle: 180 Material: Steel : Yellow chromated Flange thickness: mm Opening angle restraint: Without stop Length mm Packing: 1 or 20 pairs 65 61.0.510 100 61.0.50 Corner pivot hinge, straight Material: Brass Opening angle restraint: Without stop Turning point external Opening angle: 250 : Polished Flange thickness: 2 mm Application Shelf Length mm Packing: 1, 5 or 25 pairs 50 62.10.80 FF.79
Corner pivot hinge, cranked Application Shelf Material: Brass : Matt Opening angle restraint: Without stop Opening angle: 180 Flange thickness: 4 mm Turning point external Length mm Packing: 1, 5 or 25 pairs 70 62.01.500 Pivot hinge for writing bureau Application Flap closed Flap open Area of application: For flaps Opening angle: 90 Material: Brass : Polished Opening angle restraint: With stop at 90 opening Version: With one short flange Length mm Packing: 1 or 5 pairs Flange thickness mm 80 / 61.50.802 150 4/5 61.50.820 FF.80
Pivot hinge Opening angle: 140 For door thickness: 12 21 mm Opening angle restraint: Without stop : Press fitting Material Plastic Packing: 20 or 200 pairs Colour White Brown Black 61.22.710 61.22.110 61.22.10 Application Flap closed Function Flap open Removing the door: Lift the spring-loaded pin with a small screwdriver. Condition: Drilled hole in door and slotted hole in sleeve are identical. Setting the door gap: Widen or reduce door gap by turning the flange. Fix adjusted door gap with a small chipboard screw. FF.81
Hinge for wood thicknesses from 18 mm and above -dimensionally adjustable for door alignment with millimetre accuracy Chrome plated matt/grey Dimensions Black/black Area of application: For overlay or inset mounting Opening angle: 180 Material: Zinc alloy/plastic : For screw fixing Adjustment facility: Height ± 1.5 mm, side ± 1 mm, depth ± 1.5 mm (with overlay mounting), height ± 1.5 mm, side ± 1.5 mm, depth ± 1 mm (with inset mounting) ±1.5 ±1 ±1.5 ±1.5 ±1.5 ±1 Supplied with 1 Hinge, chrome plated matt or black 4 Cover caps, grey, black or white /Colour Hinge: Chrome plated matt, cover cap: Grey Hinge: Chrome plated matt, cover cap: White Hinge: Black, cover cap: Black Packing: 1 pc. 41.24.414 41.24.714 41.24.14 Overlay door mounting Note Factory setting: Gap 1.5 mm Inset door mounting Gap adjustment: 0 mm Drilling pattern Number of hinges per door With wood thickness 18 mm: A = 9 mm With wood thickness >20 mm: A = 10 mm > Sample measurements for 20 mm thick wood Hinge distance min. 500 mm width up to 600 mm The door's width must not exceed its height FF.82
VICI Hinge for wood thickness of 19 mm Drilling dimensions Opening angle: 180 Material: Zinc alloy housing, brass link Housing finish Nickel plated Brass plated Packing: 1 or 50 pcs. 41.25.712 41.25.516 Hinge for wood thickness 18 26 mm Drilling dimensions Opening angle: 180 Material: Steel : Brass plated Application and planning dimensions For wood thickness mm Screws 8 mm Dim. A mm Dim. B mm Dim. C mm Dim. D mm Dim. E mm Gap F mm Gap G mm Gap H mm 18 20 14 16 24 26 4.0 4.0 4.5 12.0 10.0 18.0 9.0 42.0 79.0 12.0 16.0 28.0 1.5 1.8 2.5 15.5 14.0 21.5 24.0 19.0 29.0 4.0 2.0.5 4.0 5.0 4.0 For wood thickness mm Packing: 1, 0, 50 or 140 pcs. 18 20 41.05.500 14 16 41.05.510 19 21 41.05.521 24 26 41.05.50 FF.8
SOSS Hinge for wood thickness 41 51 mm Opening angle: 180 Version: Link with plastic slide plates Supllied with fixing material Calculation table for number of required door strips Example: A door with 700 mm width, 45 kg weight and 41 mm thickness required door strips with 41.07.572 or 41.07.772 width mm weight kg thickness mm Number of door strips Version Packing: 2 pcs. Brass plated Nickel plated Without plastic slide plates With plastic slide plates For wood thickness mm Dimensions mm A Housing: Zinc alloy brass plated, Links: Steel brass plate B Housing: Zinc alloy nickel plated, Links: Steel nickel plated C Housing: Stainless steel SUS 16, Links: Stainless steel SUS 16 A B C D E F G A B C 1 16 9.5 42.0 22.0 5.5 6.0 2.4 2.8 41.07.518 41.07.718 41.07.018 19 24 12.7 44.5 19.0 4.8 1.1.2 41.07.527 41.07.727 41.07.027 60. 1.8 6.4 12.0 41.07.56 41.07.76 41.07.06 25 27 15.8 70.0 4.1 7.1 15.6 4.0.6 41.07.545 41.07.745 41.07.045 28 4 19.0 95. 52.1 9.5 17.8 4.8 4.0 41.07.554 41.07.754 41.07.054 5 8 25.4 117.5 65. 12.0 24.6 6.4 5.5 41.07.56 41.07.76 41.07.06 41 45 29.0 62.5 9.7 0.0 9.5 41.07.572 41.07.772 41.07.072 48 51 6.0 19.0 74.5 11.9 9.1 7.5 12.0 41.07.581 41.07.781 41.07.081 FF.84
Concealed mortise hinge non-adjustable For timber frames For flush doors For concealed mounting Max. opening angle: 180º º thicknesses mm Packing: 2 pcs. incl. fixing material Dimensions mm A Housing: Zinc alloy satin chrome B Housing: Zinc alloy brass plated C Housing: Zinc alloy antique brass D Housing: Zinc alloy antique copper A B C D E F G A B C D 19 24 1 45 4 2 17 19 5 41.07.927 41.07.827 41.07.127 41.07.627 60 5 18 2 6 41.07.96 41.07.86 41.07.16 41.07.66 25 27 16 70 0.5 5 22.7 4 7 41.07.945 41.07.845 41.07.145 41.07.645 28 6 19 95 27 50 10 41.07.954 41.07.854 41.07.154 41.07.654 7 25 116 9.5 4 6 61 11 41.07.96 41.07.86 41.07.16 41.07.66 8 4 27 118 12. 8 40 65 12 41.07.972 41.07.872 41.07.172 41.07.672 4 47 4 19 12 50 81 41.07.981 41.07.881 41.07.181 41.07.681 thickness mm Dimensions mm Material/finish A B C D E F G A B C D 19 24 12.4 44 4 2 18. 18.7 5 41.18.421 41.18.821 41.18.121 41.18.122 12.7 60.4 4 17.8 0 5.6 41.18.42 41.18.82 41.18.12 41.18.124 25 27 15.7 69 5 22.7.7 7 41.18.425 41.18.825 41.18.125 41.18.126 28 6 18.4 94 6 26.8 50 9 41.18.427 41.18.827 41.18.127 41.18.128 7 25 116 6 4 6.5 6.8 11 41.18.429 41.18.829 41.18.129 41.18.10 FF.85
SEPA Hinge for wood thickness of 24 mm Drilling dimensions Opening angle: 180 Material: Brass Dim. L mm SEPA-MINI Hinge for wood thickness of 12 mm Drilling dimensions Dim. L1 mm No. of drilled holes 41 2 6 Nickel plated polished Matt 52 4 8 Nickel plated polished Matt 88 70 Nickel plated polished Packing: 1, 10 or 20 pcs. Material: Brass Dim. L mm Dim. L1 mm Matt 9 2 Nickel plated polished Packing: 1 or 50 pcs. Matt 41.26.701 41.26.501 41.26.702 41.26.502 41.26.70 41.26.50 41.27.700 41.27.500 FF.86
ZYSA Hinge for wood thickness of 14 40 mm Opening angle: 180 Material: Brass : Matt Mounting: For right and left hand use Application Mounting example for butting overlay doors Hinge closed open Hinge Drilling dimensions Drill-hole Ø Ø Mounting example for butting inset doors Hinge closed open Mounting example for butting overlay flaps Shelf Flap closed Example of folding door Mounting example for two panels Panel Flap Panel closed Hinge Hinge Shelf Flap open Panel Panel Hinge Hinge Panel open Hinge Flap Application and planning dimensions For wood thickness mm 14 19 17 22 20 26 22 28 24 2 1 40 Screws Ø mm ø Length L mm Drill hole Ø mm ø Drilling depth T mm Dim. A mm Dim. B mm Gap F mm 1 Position is secured by tightening the tensioning screw 2 With extremely heavy loads, each of the cylinders can be secured from the front using a chipboard or wood screw For wood thickness mm Packing: 1, 12, 24 or 48 pcs. 2.5.0.5.5 4.0 4.5 11.0 1.5 15.5 16.5 17.5 25.0 10.0 12.0 14.0 16.0 18.0 24.0 11.0 1.5 15.5 16.5 17.5 25.0 16.5 20.0 2.0 25.0 27.0 6.5 2.0 2.2.0.0.0.5 2.5.5.0.0.0.5 14 19 41.22.506 17 22 41.2.50 20 26 41.1.507 22 28 41.11.50 24 2 41.12.500 1 40 41.14.504 FF.87
GS 22.5 and GS 45 Mitred hinges Application example GS mitred hinge 45 Adjustment possibility Height Width panel Depth Height adjustment mm, width Height and depth adjustment 1.5 mm. Material: Zinc alloy cup, steel link arm : Nickel plated For door thickness: 16 22 mm For side panel thickness: 16 22 mm, from 20 mm edge has to be chamfered by about mm Adjusting facility: Three-dimensional GS 22.5 Mitred hinge Mounting Drilling dimensions mitre angel 22.5 closed open GS 45 Mitred hinge Drilling dimensions mitre angel 45 Flap Carcase Opening angle Packing: 4 or 20 pcs. Mounting closed open 120 25.00.726 Opening angle 15 25.00.708 Packing: 4 or 20 pcs. FF.88
Mitred flap hinge Drilling dimensions mitre cut Mitre angle: 45 Material: Zinc alloy cup, steel link arm : Nickel plated For door thickness: 16 22 mm For side panel thickness: 16 22 mm, from 20 mm edge has to be chamfered by about mm Adjustment possibility: Three-dimensional Flap Adjusting facility Height Width Carcase Depth Height Opening angle Packing: 4 or 20 pcs. Note Usable in combination with flap stays only 90 25.02.702 panel Height adjustment mm, width and depth adjustment 1.5 mm Flap Base Flap closed Flap Flap open Base FF.89
Corner unit folding door hinge, opening angle 150, gap 4 18 mm Material: Zinc alloy : Nickel plated For door thickness: 15 24 mm Adjusting facility: Three-dimensional Drilling dimensions for cup Screw fixing Packing: 1 or 100 pcs. 4.90.700 Adjusting facility closed open FF.90
Glass door hinge for glass thickness 6 10 mm Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC : Satin nickel Glass thickness: 6-10 mm Support Supplied with 1 Hinge (for top) 1 Hinge (for bottom) 2 Supports Satin nickel Packing: 1 set 61.42.670 FF.91
GLARIOR Glass door hinge, opening angle 95 Area of application: For inset glass doors Material: Zinc alloy For glass thickness: 6 mm Glass door width: max 50 mm Glass door height: max 800 mm to bottom and upper shelf, direct fixing to glass door Version: Without catch No drilling in glass necessary Supplied with: Pressure plate Inset mounting Fixing to the glass door 1 Stick pressure plate on in required position 2 Press-fit rotating element Adjust glass door 4 Tighten screws Nickel plated matt Nickel plated polished Chrome plated polished Packing: 1, 10 or 100 pcs. Protective foil Self-adhesive pad Pressure plate Glass door Pressure plate Rotating element 61.49.60 61.49.701 61.49.201 FF.92
Glass door hinge, opening angle 170 panel mounting Material: Zinc alloy For door height: Max. 600 mm For door width: Max. 450 mm For glass thicknesses: Max. 5 mm Adjustment possibility: Depth and height adjustment to side panel and direct fixing to glass door With catch No drilling in glass necessary panel mounting Area of application: For overlay glass doors Arm: Cranked Adjustment possibility: Depth adjustment with slot Fixing with additional third screw possible Supplied with: Plastic spacer plate Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs 61.9.241 61.9.641 FF.9
Inset mounting Area of application: For inset glass doors Arm: Straight Adjustment possibility: Height adjustment with slot Supplied with: Plastic spacer plate Glass door Open Closed Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs 61.9.240 61.9.640 Order reference From door height of min. 600 mm a centre hinge must be ordered. Centre hinge, only usable with hinge for inset mounting Area of application: For door heights of 600 mm and above Arm: Straight Adjustment possibility: Height adjustment with slot Open Glass door Closed Chrome plated polished Nickel plated polished Packing: 1 or 50 pairs 61.9.242 61.9.642 FF.94
Glass door hinge, opening angle 170, with exposed axle Area of application: For inset glass doors Material: Zinc alloy For glass thickness: Max. 5.0 mm to side panel and direct fixing to glass door With catch No drilling in glass necessary Inset mounting Nickel plated polished Black matt Packing: 1 or 50 pairs 61.97.600 61.97.00 CLARONDA Glass door hinge, opening angle 105 Inset mounting Area of application: For inset glass doors Material: Brass For glass thickness: 4 6 mm Mounting: For right and left hand use Without catch, with glass aperture and side panel mounted separately removable by means of clamping screw Chrome plated polished Packing: 1 or 10 pcs. 61.47.207 FF.95
Glass door hinge, opening angle 180, with exposed axle Material: Brass For glass thickness: 6 mm Mounting: For right and left hand use Without catch, with glass aperture panel Brass matt Nickel plated matt Packing: 1 or 20 pcs. 61.85.501 61.85.609 panel Glass door Closed Glass door Open Glass door hinge, opening angle 90, length 4 mm Glass door panel Closed panel Glass door Open Area of application: For inset glass doors Material: Zinc alloy For door height: Max. 800 mm For door width: Max. 400 mm For glass thickness: Max 6.5 mm Version: With black plastic bushing and rubber buffer : Plug fitting into base and direct fixing to glass door with screw Without catch, no drilling in glass necessary Black matt Packing: 5 or 50 pairs 61.69.20 FF.96
SIMPLEX-CLIP Glass door hinge, opening angle 110 Inset mounting Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max. 400 mm For glass thickness: 5.0 mm Version: With black plastic bushing and clips : Plug fitting into base and direct fixing to glass door, no tools required Without catch, no drilling in glass necessary Chrome plated polished Packing: 1 or 50 pairs 61.42.221 SIMPLEX Glass door hinge, opening angle 110 6 40 24 7 1 12 2 5 Ø 5 Area of application: For inset glass doors For door height: Max. 600 mm For door width: Max. 400 mm For glass thickness: Max. 4.7 mm Version: With black plastic bushing : Plug fitting into base and direct fixing to glass door with screw Without catch, no drilling in glass necessary Chrome plated polished Black matt Packing: 1 or 50 pairs 61.42.202 61.42.00 FF.97
Glass door hinge, opening angle 180 Inset mounting Area of application: For inset glass doors Material: Zinc alloy For door height: Max. 800 mm For door width: Max. 50 mm For door weight: 4 kg For glass thickness: 4 6 mm to side panel and direct fixing to glass door Without catch, no drilling in glass necessary Closed Nickel plated matt Packing: 1 or 10 pcs. 61.84.701 Open FF.98