Complete range of transformers for any applications or size

Complete range of transformers for any applications or size

SURGE PROTECTOR KAB-15A(15A/110V) KAB-10A(10A/V) 3min delay Specifications: Input voltage: 160V to 40V Output voltage: 110/V +/- 3% Frequency: 50/60Hz Temperature rise (input voltage 0V, output voltage V and at rated load):less than 75 resistance: more than 3Mohm at DC 500V AUTO TRANSFORMERS 75watts 000watts can be done to any specification

Electrical Cable Product Group PVC Flexible 491X Flexible Cable to BS6004 H05V-K H07V-K Designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers. BS6004, CENELEC HD1.3 Class 5 flexible plain copper conductor to BS EN 608:05 (previously BS6360) PVC (Polyvinyl Chloride) Type TI 1 to BS7655 Colour Black, Blue, Green/Yellow, Red, Yellow, White, Violet, Brown, Grey, Orange, Pink H05V-K 300/500V, H07V-K 0/750V 0 C to +70 C Minimum Bending Radius 6 x overall diameter H05V-K H07V-K ² Nominal Overall Diameter A5VKBK0075 0.75.3 10.6 A5VKBK0010 1.00.5 13.7 ² Nominal Overall Diameter A7VKBK0015 1.5 3.1 A7VKBK005.5 3.6 31 A7VKBK0040 4.0 4.3 46 A7VKBK0060 6.0 5.5 75 A7VKBK010 10.0 6.8 15 A7VKBK016 16.0 8.6 199 A7VKBK05 5.0 10.0 99 A7VKBK035 35.0 11.5 41 A7VKBK050 50.0 13.8 539 A7VKBK070 70.0 15.6 730 A7VKBK095 95.0 17.5 973 s Class 5 flexible Copper s for Single Core and Multi-Core cables 1 3 4 Maximum Diameter of Wires in Maximum Resistance of at ºC Plain Wires ohms/km Metal-Coated Wires ohms/km 0.75 0.1 6.0000 6.7000 1.00 0.1 19.5000.0000 1.50 0.6 13.3000 13.7000.50 0.6 7.9800 8.100 4.00 0.31 4.9500 5.0900 6.00 0.31 3.3000 3.3900 10.00 0.41 1.9100 1.9500 16.00 0.41 1.100 1.400 5.00 0.41 0.7800 0.7950 35.00 0.41 0.5540 0.5650 50.00 0.41 0.3860 0.3930 70.00 0.51 0.7 0.770 95.00 0.51 0.60 0.100 Table in accordance with BS EN 608:05 (previously BS6360) Electrical Characteristics Resistance Values (ohms per kilometre and Mohms per kilometre) H05V-K ² Resistance at C Max. ohms/km Resistance at 70 C Min. Mohms/Km A5VKBK0075 0.75 6.0 0.013 A5VKBK0010 1.00 19.5 0.011

6491X Cable to BS6004 H07V-R/H07V-U AX Fixed Wiring 6491X Cable H07V-R/H07V-U to BS6004 is suitable for power and lighting circuits and building wiring. The cable is intended for use in semi-flush exposed conduits and embedded conduits as well as in closed installation ducts, and is ideal for the internal wiring of appliances and apparatus. BS6004 H07V-R: Class stranded plain copper conductors to BS EN 608:05 (previously BS6360) H07V-U: Class 1 solid plain copper conductor to BS EN 608:05 (previously BS6360) PVC (Polyvinyl Chloride) Type TI1 to BS7655 Colour Red, Black, Blue, Yellow, Brown, White, Green/Yellow, Grey 0/750V 0 C to +70 C Minimum Bending Radius Up to 10²: 3 x overall diameter 10² to 5²: 4 x overall diameter Above 5²: 5 x overall diameter No. of Cores x Nominal Cross Sectional Area # x Nominal Thickness of Maximum Overall Diameter AXBK0015 1 x 1.5 0.7 3.3 AXBK005 1 x.5 0.8 3.9 3 AX*0040 1 x 4.0 0.8 4.6 50 AX*0060 1 x 6.0 0.8 5. 71 AX*010 1 x 10.0 1.0 6.7 1 AX*016 1 x 16.0 1.0 7.8 180 AX*05 1 x 5.0 1. 9.7 80 AX*035 1 x 35.0 1. 10.9 380 AX*050 1 x 50.0 1.4 1.8 510 AX*070 1 x 70.0 1.4 14.6 710 AX*095 1 x 95.0 1.6 17.1 970 AX*1 1 x 1.0 1.6 18.8 10 AX*150 1 x 150.0 1.8.9 1480 AX*185 1 x 185.0.0 3.3 1900 AX*40 1 x 40.0. 6.6 480 AX*300 1 x 300.0.4 9.6 3100 *s shown above designate the sheath colour (*). For each colour substitute * for a colour code as listed below. e.g. ATRD0040 = 4.0 Red, ATPK0015 = 1.5 Pink Colour Black Blue Grey Green/Yellow Red Yellow Brown White Code BK BL GR GY RD YW BR WH s Class stranded conductors for Single Core and Multi-Core cables 1 3 4 5 6 7 8 Nominal Cross Sectional Area Minimum Number of Wires in the Maximum Resistance of at ºC Circular Circular Compacted Shaped Annealed Copper Cu Al Cu Al Cu Al Plain Wires ohms/km 1.00 7 - - - - - 18.1000 1.50 7-6 - - - 1.1000.50 7-6 - - - 7.4100 4.00 7-6 - - - 4.6100 6.00 7-6 - - - 3.0800 10.00 7 7 6 6 - - 1.8300 16.00 7 7 6 6 - - 1.1500 5.00 7 7 6 6 6 6 0.770 35.00 7 7 6 6 6 6 0.540 50.00 19 19 6 6 6 6 0.3870 70.00 19 19 1 1 1 1 0.680 95.00 19 19 15 15 15 15 0.1930 1.00 37 37 18 15 18 15 0.1530 150.00 37 37 18 15 18 15 0.140 185.00 37 37 30 30 30 30 0.0991 40.00 37 37 34 30 34 30 0.0754 300.00 61 61 34 30 34 30 0.0601 630.00 91 91 53 53 53 53 0.083 Table in accordance with BS EN 608:05 (previously BS6360) Datasheet Continues»

Eland Cables Datasheet Electrical Cable Product Group PVC Flexible Tri-rated Cable Eland Product Group Reference AT High temperature, flame retardant cable designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers. BS631 Type CK UL Subj.758 CSA c.. No. 17 (only applicable for sizes up to 1 ) Class 5 flexible plain copper conductor to BS EN 608:05 (previously BS6360) PVC (Polyvinyl Chloride) Colour Black, Red, Blue, Light Blue, Dark Blue, Yellow, Green/Yellow, Grey, Brown, Orange, White, Violet, Green, Pink BS631: 600/1000V UL, CSA: 600V BS631: 90 C (105 C for 15,000 hours) UL, CSA: 105 C Minimum Bending Radius 6 x overall diameter Note Cables above 1² in size are referred to as Bi-rated since the CSA standard applies only to sizes up to and including 1² Eland Part Number No of Cores x Nominal Cross Sectional Area # x AWG Nominal Thickness of Nominal Overall Diameter UL Style Number AT*0005 1 x 0.50 0.80.50 1 1015 AT*00075 1 x 0.75 0.80.70 15 1015 AT*0010 1 x 1.00 18 0.80.95 18 1015 AT*0015 1 x 1.50 16 0.80 3. 3 1015 AT*005 1 x.50 14 0.80 3.65 34 1015 AT*0040 1 x 4.00 1 0.80 4. 48 1015 AT*0060 1 x 6.00 10 0.80 4.70 67 1015 AT*010 1 x 10.00 8 1.14 6.50 119 108 AT*016 1 x 16.00 6 1.5 8.00 187 183 AT*05 1 x 5.00 4 1.5 9.40 91 183 AT*035 1 x 35.00 1.5 10.60 406 183 AT*050 1 x 50.00 1.0 1.90 580 184 AT*070 1 x 70.00 /0.0 14.60 780 184 AT*095 1 x 95.00 3/0.0 16.10 1055 184 AT*1 1 x 1.00 4/0.0 17.90 1175 184 AT*150 1 x 150.00 50 MCM.41. 145 184 AT*185 1 x 185.00 350 MCM.41.85 1735 184 AT*40 1 x 40.00 0 MCM.41 4.40 310 184 *s shown above designate the sheath colour (*). For each colour substitute * for a colour code as listed below. e.g. ATRD0040 = 4.0 Red, ATPK0015 = 1.5 Pink Colour Black Green Blue Light Blue Dark Blue Grey Green/ Yellow Orange Red Pink Yellow Violet Brown White Code BK GN BL LTBL DKBL GR GY OR RD PK YW VI BR WH s Class 5 flexible Copper s for Single Core and Multi-Core cables 1 3 Maximum Diameter of Wires in Maximum Resistance of at ºC Plain Wires ohms/km 0.50 0.1 39.0000 0.75 0.1 6.0000 1.00 0.1 19.5000 1.50 0.6 13.3000.50 0.6 7.9800 4.00 0.31 4.9500 6.00 0.31 3.3000 10.00 0.41 1.9100 16.00 0.41 1.100 5.00 0.41 0.7800 35.00 0.41 0.5540 50.00 0.41 0.3860 70.00 0.51 0.7 95.00 0.51 0.60 1.00 0.51 0.1610 150.00 0.51 0.190 185.00 0.51 0.1060 40.00 0.51 0.0801 Table in accordance with BS EN 608:05 (previously BS6360) Datasheet Continues» Issue_0_0310

Electrical Cable Product Group PVC Flexible 18-Y Flexible Cable H03VV-F Light duty cable for use in domestic premises, kitchens and offices. For use with light portable appliances such as radios, table lamps and office machines. BS6500, CENELEC HD1.5, VDE 81 Class 5 flexible plain copper conductors to BS EN 608:05 (previously BS6360) PVC (Polyvinyl Chloride) to BS7655 Sheath PVC (Polyvinyl Chloride) to BS7655 Sheath Colour Black or White Core Identification Cores: Blue, Brown 3 Cores: Green/Yellow, Blue, Brown 300/500V 0 C to +70 C Minimum Bending Radius 6 x overall diameter No x Cores x Nominal Cross Sectional Area # x Nominal Thickness of Nominal Thickness of Sheath Nominal Overall Diameter A3Y0050* x 0.50 0.5 0.6 5.0 38 A3Y0075* x 0.75 0.5 0.6 5.4 46 A3Y030050* 3 x 0.50 0.5 0.6 5.4 A3Y030075* 3 x 0.75 0.5 0.6 5.8 56 A3Y040050* 4 x 0.50 0.5 0.6 5.8 55 *s shown above designate the sheath colour (*). For each colour either substitute * for BK (black) or WH (white) s Class 5 flexible Copper s for Single Core and Multi-core cables 1 3 Maximum Diameter of Wires in Maximum Resistance of at ºC Plain Wires ohms/km 0.50 0.1 39.0000 0.75 0.1 6.0000 Table in accordance with BS EN 608:05 (previously BS6360) Electrical Characteristics Current Carrying Capacity (amperes): and Mass Supportable (kg) Cross Sectional Area ² Single Phase AC Current Carrying Capacity Three Phase AC Maximum Mass Supportable by Twin Flexible Cord (see Regulations 5.7. and 559.6.1.5) kg 1 3 4 0.50 3 3 0.75 6 6 3 Rating factor for ambient temperature 60ºC thermoplastic or thermosetting insulated cords: Ambient Temperature 35ºC 40ºC ºC 50ºC 55ºC Rating Factor 0.91 0.8 0.71 0.58 0.41 The above table is in accordance with Table 4F3A of the 17th Edition of IEE Wiring Regulations. Voltage Drop (per ampere per metre) Cross Sectional Area ² DC or Single Phase AC mv/a/m Three Phase AC mv/a/m 1 3 0.50 93 80 0.75 6 54 operating temperature: 60ºC The above table is in accordance with Table 4F3B of the 17th Edition of IEE Wiring Regulations.

Electrical Cable Product Group Fixed Wiring 64-B LSZH Twin and Earth Domestic wiring cable for the surface wiring of sockets and lighting where fire, smoke emission and toxic fumes create a potential threat to life and equipment. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required. BS711 EN 5068 BS EN 5067--1 EN 5067 EN 5065 IEC 6033 Plain copper conductors to BS EN 608:05 (previously BS6360) Class 1 solid: 1.5² and.5² Class stranded: 4.0², 6.0² and 10.0² Class stranded compacted: 16.0² Circuit Protection (Earth) Class 1 solid plain copper conductor: 1.0², 1.5²,.5², 4² and 6² Class stranded plain copper conductor: 10² and 16² XLPE (Cross-linked Polyethylene) Sheath LSZH (Low Smoke Zero Halogen) Sheath Colour White 300/500V Operating Temperature: -5 C to 90 C Note: Where a conductor operates at a temperature exceeding 70 C it shall be ascertained that the equipment connected to the conductor is suitable for the conductor operating temperature (see regulation 51-0 of BS7671, the 16th Edition of IEE Wiring Regulations) No. of Cores x Nominal Cross Sectional Area # x Nominal Thickness of Nominal Thickness of Sheath Nominal Cable Dimension (Thickness x Width) A9T64B015W x 1.5 0.7 0.9 4.80 x 8.91 88 A9T64B05W x.5 0.7 1.0 5.40 x 10.16 13 A9T64B040W x 4.0 0.7 1.0 6.00 x 11.36 16 A9T64B060W x 6.0 0.7 1.1 6.75 x 13.04 5 A9T64B10W x 10.0 0.7 1. 7.80 x 15.80 340 A9T64B16W x 16.0 0.7 1.3 8.80 x 18.15 49 A9T643B015W 3 x 1.5 0.7 0.9 4.80 x 11.91 117 s Class stranded conductors for Single Core and Multi-Core cables 1 4 8 Minimum Number of Wires in the Maximum Resistance of at ºC Circular Circular Compacted Annealed Copper ohms/km 1.50 7 6 1.1000.50 7 6 7.4100 4.00 7 6 4.6100 6.00 7 6 3.0800 10.00 7 6 1.8300 16.00 7 6 1.1500 Table in accordance with BS EN 608:05 (previously BS6360) Electrical Characteristics Current Carrying Capacity (amperes) and Voltage Drop (per ampere per metre) Nominal Cross Sectional Area Reference Method 100# (Above a plasterboard ceiling covered by thermal insulation not exceeding 100 in thickness) Reference Method 101# (Above a plasterboard ceiling covered by thermal insulation exceeding 100 in thickness) Reference Method 10# (In a stud wall with thermal insulation with cable touching the inner wall surface) Reference Method 103# (In a stud wall with thermal insulation with cable not touching the inner wall surface) Reference Method C* (Clipped Direct) Reference Method A* (Enclosed in conduit in an insulated wall) Voltage Drop mv/a/m 1 3 4 5 6 7 8 1.5 16 13 16 10.0 14.5 9.0.5 1 17 1 13.5 7.0 18.0 4.0 7 7 17.5 37 6.0 11.0 6.0 34 7 35 3.5 47 3.0 7.3 10.0 36 47 3.0 64 44.0 4.4 16.0 57 46 63 4.5 85 57.0.8 Ambient temperature: 30ºC operating temperature: 70ºC Wherever practicable, a cable is to be fixed in a position such that it will not be covered with thermal insulation. Regulation 53.7, BS5803-5: Appendix C: Avoidance of overheating of electric cables, Building Regulations Approved document B and Thermal insulation: avoiding risks, BR 6, BRE, 01 refer. The above table is in accordance with Table 4D5 of the 17th Edition of IEE Wiring Regulations. The Current Carrying Capacities in this appendix are based upon the following reference ambient temperatures: For non-sheathed and sheathed cables in air, irrespective of the Installation Method: 30ºC For buried cables, either directly in the soil or in ducts in the ground: ºC The current ratings stated are based on conservative assumptions, and therefore, in some instances, may be adjusted according to the ambient installation and operating conditions.

Electrical Cable Product Group Control Flexible YY Control Flexible Cable Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use in conditions of light mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors. Generally to BS6500, VDE050 Class 5 flexible plain copper conductors to BS EN 608:05 (previously BS6360), VDE095 PVC (Polyvinyl Chloride) Type YI Sheath PVC (Polyvinyl Chloride) Type YM Sheath Colour Grey 300/500V Fixed: -35 C to + 70 C Flexing: -5 C to + 70 C Minimum Bending Radius 10 x overall diameter Core Identification Black with White numbers (3 cores and above includes Green/Yellow) Coloured cores available No. of Cores x Nominal Cross Sectional Area # x ² YY Control Flexible Cable - Cores Nominal Overall Diameter kg/ Km FCGA/AP Gland A5Y0050 x 0.50 4.7 3 -/S A5Y0075 x 0.75 5.1 39 -/S A5Y010 x 1.00 5.3 49 -/S A5Y015 x 1.50 6. 61 -/S A5Y05 x.50 7.3 9 -/ YY Control Flexible Cable - 3 Cores A5Y0300050 3 x 0.50 5.1 39 -/S A5Y030075 3 x 0.75 5.4 50 -/S A5Y03010 3 x 1.00 5.6 60 -/S A5Y03015 3 x 1.50 6.5 79 -/S A5Y0305 3 x.50 7.7 119 -/ A5Y03040 3 x 4.00 9.3 176 S/ A5Y03060 3 x 6.00 11.0 55 S/ A5Y0310 3 x 10.00 14.0 411 5/5 A5Y0316 3 x 16.00 18. 653 5/3 YY Control Flexible Cable - 4 Cores A5Y0400050 4 x 0.50 5.4 46 -/S A5Y040075 4 x 0.75 5.9 59 -/S A5Y04010 4 x 1.00 6.5 69 -/S A5Y04015 4 x 1.50 7.4 9 -/ A5Y0405 4 x.50 8.5 148 S/ A5Y04040 4 x 4.00 10. 19 S/ A5Y04060 4 x 6.00 1.3 33 /5 A5Y0410 4 x 10.00 15.0 513 5/5 A5Y0416 4 x 16.00 19. 844 5/3 A5Y045 4 x 5.00 3.0 15 3/3 YY Control Flexible Cable - 5 Cores A5Y0500050 5 x 0.50 6. 57 -/S A5Y050075 5 x 0.75 6.7 68 -/S A5Y05010 5 x 1.00 6.9 83 -/S A5Y05015 5 x 1.50 7.9 109 -/ A5Y0505 5 x.50 9.7 180 S/ A5Y05040 5 x 4.00 11.6 69 / A5Y05060 5 x 6.00 13.5 391 5/5 A5Y0510 5 x 10.00 17.1 650 5/5 A5Y0516 5 x 16.00 1.3 101 3/3 A5Y055 5 x 5.00 5.8 1548 3/40 A5Y0535 5 x 35.00 9.5 9 40/40 YY Control Flexible Cable - 6 Cores A5Y060075 6 x 0.75 6.9 81 -/S A5Y06010 6 x 1.00 7.0 101 -/ YY Control Flexible Cable - 7 Cores A5Y070050 7 x 0.50 6.6 70 -/S A5Y070075 7 x 0.75 7.1 90 -/ A5Y07010 7 x 1.00 7.5 104 -/ A5Y07015 7 x 1.50 9.0 147 S/ A5Y0705 7 x.50 10.1 3 S/ YY Control Flexible Cable - 8 Cores A5Y080075 8 x 0.75 7.4 100 -/ A5Y08010 8 x 1.00 8.0 1 S/ A5Y08015 8 x 1.50 9.5 169 S/

Electrical Cable Product Group Mains Armoured SWA Cable - BS5467 Steel Wire Armoured PVC SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting. BS5467, IEC 6050 Class plain stranded copper conductor to BS EN 608:05 (previously BS6360) XLPE (Cross-Linked Polyethylene) Bedding PVC (Polyvinyl Chloride) Armouring BS5467 XLPE/PVC/AWA/PVC (Copper) No. of Cores x Nominal Cross Sectional Area # x ² Nominal Thickness of AWA Cable - BS5467 Aluminium Wire Armoured PVC - 1 Core Under Armour Nominal Diameter Overall A9AWA150 1 x 50 1.0 1.7 17.5 800 A9AWA170 1 x 70 1.1 14.7. 960 A9AWA195 1 x 95 1.1 16.6.3 140 A9AWA11 1 x 1 1. 18.5 4. 1510 A9AWA1150 1 x 150 1.4.8 7.4 1900 A9AWA1185 1 x 185 1.6 3. 30.0 3 A9AWA140 1 x 40 1.7 6.0 3.8 930 A9AWA1300 1 x 300 1.8 8.6 35.6 3580 A9AWA1400 1 x 400.0 3.4 40.4 4600 A9AWA1500 1 x 500. 36.0 44. 5770 A9AWA1630 1 x 630.4 40.0 48.8 750 Multi-Core: SWA (Steel Wire Armour) Sheath PVC (Polyvinyl Chloride) Sheath Colour Black 600/1000V 0 C to +90 C Minimum Bending Radius 1.5-16 : 6 x overall diameter 5 and above: 8 x overall diameter Core Identification 1 Core: Brown Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White cores with Black numbers BS5467 XLPE/PVC/SWA/PVC (Copper) No. of Cores x Nominal Cross Sectional Area # x ² Nominal Thickness of SWA Cable - BS5467 Steel Wire Armoured PVC - Cores Under Armour Nominal Diameter Overall A9SWA15 x 1.5 0.6 7.3 1.1 30 A9SWA5 x.5 0.7 8.5 13.6 346 A9SWA40 x 4.0 0.7 9.4 14.7 410 A9SWA60 x 6.0 0.7 10.5 15.9 499 A9SWA10 x 10.0 0.7 1.3 18.0 648 A9SWA16 x 16.0 0.7 14.3.4 978 A9SWA5 x 5.0 0.9 14.7.4 190 A9SWA35 x 35.0 0.9 16.8 3.3 1500 A9SWA50 x 50.0 1.0 19.0 5.8 1890 A9SWA70 x 70.0 1.1.0 9.0 0 A9SWA95 x 95.0 1.1 5.1 33.1 3300 A9SWA150 x 150.0 1.4 30.9 39.3 4750 SWA Cable - BS5467 Steel Wire Armoured PVC - 3 Cores A9SWA3015 3 x 1.5 0.6 7.8 1.6 330 A9SWA305 3 x.5 0.7 9. 14.1 390 A9SWA3040 3 x 4.0 0.7 10.0 15.3 464 A9SWA3060 3 x 6.0 0.7 11. 16.6 568 A9SWA310 3 x 10.0 0.7 13.1 19.5 866 A9SWA316 3 x 16.0 0.7 15.3 1.6 115 A9SWA35 3 x 5.0 0.9 18.9 5.5 1800 A9SWA335 3 x 35.0 0.9 1.3 8.0 30 A9SWA350 3 x 50.0 1.0 1.7 8.5 490 A9SWA370 3 x 70.0 1.1 5. 3. 390 A9SWA395 3 x 95.0 1.1 8.8 37.0 4440 SWA Cable - BS5467 Steel Wire Armoured PVC - 4 Cores A9SWA4015 4 x 1.5 0.6 8.5 13.5 365 A9SWA405 4 x.5 0.7 9.9 15.0 438 A9SWA4040 4 x 4.0 0.7 11.0 16.4 53 A9SWA4060 4 x 6.0 0.7 1.3 18.7 764 A9SWA410 4 x 10.0 0.7 14.5 1.1 1013 A9SWA416 4 x 16.0 0.7 17.0.9 1360 A9SWA45 4 x 5.0 0.9 1.0 7.6 160 A9SWA435 4 x 35.0 0.9 3.6 30.4 690 A9SWA0 4 x 50.0 1.0 5.0 3.0 3130 A9SWA470 4 x 70.0 1.1 9.5 37.7 00 A9SWA495 4 x 95.0 1.1 33.3 41.7 5600 A9SWA41 4 x 1.0 1. 37.5 47.1 7400 A9SWA4150 4 x 150.0 1.4 41.6 51.4 8780 A9SWA4185 4 x 185.0 1.6 46.4 56.6 10630 A9SWA440 4 x 40.0 1.7 5.6 63.0 13390

LR Thermal Relay LR-D13 LR-D3 LR-D-33 3-80A LR-D33 80-93A This series of thermal relay can be used in the circuit of 50Hz or 60Hz, rated insulation voltage 660V, rated current 0.1-93A for protecting the phase break when the electric motor is overload. The relay has different mechanism and temperature compensation, and it can be plugged in L C1-D seri es AC Contactor. At present, it is the most advanced thermal relay in the world. Characteristics a. Fundamental parameter of the main circuit (a).rated insulation voltage 660V. (b).rated working current 5, 36, 93A separately (c).the regulator seal of rated setting current. (D).Current of the thermal component(see list 1) b. Auxiliary Circuit (a).there are one pair of N/O and N/C contract with electric insulation Specifications (b).rated insulation Voltage 500V. (C). Rated frequency 50-60Hz. (D).Use group, rated working voltage, appoint thermal current and rated current.

CJX(LC1-D)AC Contactor CJX-09(LC1-D09) CJX-1(LC1-D1) CJX-18(LC1-D18) CJX-5(LC1-D5) CJX-3(LC1-D3) CJX-40(LC1-D40) CJX series AC Contactor is suitable for using in the circuits the rated voltage up to 660V AC 50Hz or 60 Hz, rated current up to 95A, for making & breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine- interlocking device etc, it becomes the delay co nt ac to r, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is produced according to IEC 60947-4, GB14048-4. CJX-50(LC1-D50) CJX-65(LC1-D65) CJX-80(LC1-D80) CJX-95(LC1-D95) New type CJX-18N(LC1-D18N) New type CJX-3N(LC1-D3N) Standard control circuit voltages Volts 4 4 48 110 30 40 380 400 415 440 500 660 50Hz 60Hz 50/60Hz B5 B6 B7 D5 D6 D7 E5 E6 E7 F5 F6 F7 M5 M6 M7 P5 - P7 U5 U6 U7 Q5 Q6 Q7 V5 V7 N5 N7 R5 R6 R7 S5 Y5 Specifications Type Rated working current (A) AC3 capacity of three-phase squirrel-cage motor AC3(KW) AC3 AC4 /30V 380/400V 415V 440V 500V 660/690V Rated heat current(a) 4 AC4 10 Electrical life 6 AC3 10 6 Mechanical life 10 Number of the contact CJX-09 (LC1-D09) 9 3.5. 4 4 4 5.5 5.5 CJX-1 (LC1-D1) 1 5 3 5.5 5.5 5.5 7.5 7.5-15 CJX-18 (LC1-D18) 18 7.7 4 7.5 9 9 10 10 3-7 CJX-5 (LC1-D5) 5 8.5 5.5 11 11 11 15 15 40 15-7 CJX-3 (LC1-D3) 3 1 7.5 15 15 15 18.5 18.5 50 15-7 3P+NO 3P+NC CJX-40 (LC1-D40) 40 18.5 11 18.5 30 60 10-7 CJX-50 (LC1-D50) 50 4 15 5 30 30 33 80 7 50 CJX-65 (LC1-D65) 65 8 18.5 30 37 37 37 37 80 7-6 1.6 CJX-80 (LC1-D80) 80 37 37 55 15 7-5 1.6 10 CJX-95 (LC1-D95) 95 44 5 55 15 7-5 1.6 10

TRADITIONAL CONCRETE MIXERS Dati tecnici/ Te chnical datas Capacità bicchiere / Drum capacity MOD. S 150 TIPO S 97 LT. 140 MOD. S 0 TIPO S 9 LT. 190 MOD. S 50 TIPO S 94 LT. 4 MOD. S 3 TIPO S 75 LT. 31 MOD. S 360 TIPO S 75 I LT. 355 Capacità utile / Work capacity Lt. 110 Lt. 160 Lt. 5 Lt. 75 Lt. 315 Motore elettrico / Electric motor HP 0,75 HP 0,75 HP 1-1,5 HP 1,5- HP 1,5- Motore a scoppio / Petrol engine _ HP 6 HP 6 HP 6-7 HP 6-7 Motore diesel / Diesel engine _ HP 6-9 HP 6-9 Peso con motore elettrico Weight with electric motor kg 95 kg 1 kg 170 kg kg 30 Lunghezza / Length cm 1 cm 165 cm 175 cm 198 cm 0 Larghezza / Width cm 80 cm 80 cm 96 cm 100 cm 100 Altezza / Height cm 15 cm 135 cm 1 cm 150 cm 150 Pale di mescolamento imbullonate al bicchiere ed abbinate ad uno specifico controfondo studiato per una maggiore velocità dʼesecuzione ed una migliore omogeneità dellʼimpasto. Mixing blades applied with bolts to the tray and combined to a specific counter-bottom that is helpful for a greater speed and for a more homogeneous mixing. Gruppo di ribaltamento con supporto in ghisa e corona di grandi dimensioni per ridurre al minimo la fatica ed agevolare tutte le operazioni di manutenzione. Tilting group with cast iron support and tilting plate of big dimensions to reduce to the least the effort and to facilitate the operations of maintenance.