DC-DC Converters PCB Mount Type SUCWR5 Ordering information SUC W R5 2 2 B P -O 2 3 4 5 6 8 R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional C :with coating (only DIP type)* * Safety standards are pending MODEL SUCWR5052 SUCWR5055 SUCWR522 SUCWR525 SUCWR5242 SUCWR5245 SUCWR5482 SUCWR5485 MAX OUTPUT WATTAGE[W].56.5.56.5.56.5.56.5 DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] 0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05 SPECIFICATIONS MODEL SUCWR5052 SUCWR5055 SUCWR522 SUCWR525 SUCWR5242 SUCWR5245 SUCWR5482 SUCWR5485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2 0.446typ 0.429typ 0.8typ 0.typ 0.089typ 0.086typ 0.045typ 0.043typ EFFICIENCY[%] *2 0typ 0typ 3typ 3typ 3typ 3typ 3typ 3typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] 0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05 LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%).40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5 PROTECTION CIUIT AND OTHERS OVEURRENT PROTECTION Works over 05% of rating and recovers automatically INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-26. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN60950-22.4X.0X3.2mm [0.88X0.28X0.52 inches] (WXHXD) / 3g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
SUCWR5 External view.62 ±0.2. SMD(type B).62 ±0.2 Pin terminal part details.8±0.3 0.6±0. 3.68±0.25 [0.4] (0-0 ) 2. DIP(type C) 0.6 ±0. 0.8 min 0.±0.4 22.4 [0.88] 23.62 ±0.6 [0.93] 22.4 [0.88] Adsorption area 2. 3.2 [0.52] 2. 3.2 [0.52] 0.min 2.54 Coplanarity within 0. 0.min 2.54 2.44.62±0.2.62 ±0.2 Recommended Pad and Hole dia. (TOP VIEW) type B.4.3.9 2 3.2 [0.08] 3.2 [0.3] 25.22 [0.3] [0.99] type C º.6 6-º0.9 Unit : 0.inch Dimensions in mm, [ ]=inches Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 3g max 20.32 [0.8] 2.44 SU.SUC/SUT-2.
DC-DC Converters PCB Mount Type SUCW3 Ordering information SUC W 3 2 2 B P -O 2 3 4 5 6 8 R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW3052 SUCW3055 SUCW322 SUCW325 SUCW3242 SUCW3245 SUCW3482 SUCW3485 MAX OUTPUT WATTAGE[W] 3.2 3 3.2 3 3.2 3 3.2 3 DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] 0.3 0. 0.3 0. 0.3 0. 0.3 0. SPECIFICATIONS MODEL SUCW3052 SUCW3055 SUCW322 SUCW325 SUCW3242 SUCW3245 SUCW3482 SUCW3485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2 0.844typ 0.8typ 0.343typ 0.329typ 0.2typ 0.65typ 0.086typ 0.083typ EFFICIENCY[%] *2 4typ 4typ 6typ 6typ 6typ 6typ 6typ 6typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] 0.3 0. 0.3 0. 0.3 0. 0.3 0. LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%).40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5 PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-28. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN60950-25X.0X6.mm [0.98X0.28X0.63 inches] (WXHXD) / 5g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
SUCW3 External view.62 ±0.2.SMD(type B) 0.6 ±0. 0.±0.4 Pin terminal part details.8 ±0.3 (0-0 ) Coplanarity within 0. 0.8min 25 [0.98].2 26.6±0.6 [.03] Adsorption area 5.5 [0.6] 6. [0.63] 3.94 3.94 [0.6] [0.6].62 ±0.2 0.min Recommended Pad and Hole dia. (TOP VIEW) type B.4 type C.3.9 3.2 2 [0.08] 3.2 [0.3] 2.6 [0.3] [.09] º.6 -º0.9 Unit : 0.inch Dimensions in mm, [ ]=inches.62 ±0.2 0.6 ±0. 2.DIP(type C) 3.68±0.25 [0.4] 25 [0.98] 5.5 [0.6] 6. [0.63] 0.min 3.84.62 ±0.2 Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 5g max.2 22.86 [0.9] 3.84 SU.SUC/SUT-29.
DC-DC Converters PCB Mount Type SUCW6 Ordering information SUC W 6 2 2 B P -O 2 3 4 5 6 8 R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW6052 SUCW6055 SUCW622 SUCW625 SUCW6242 SUCW6245 SUCW6482 SUCW6485 MAX OUTPUT WATTAGE[W] 6 6 6 6 6 6 6 6 DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2 SPECIFICATIONS MODEL SUCW6052 SUCW6055 SUCW622 SUCW625 SUCW6242 SUCW6245 SUCW6482 SUCW6485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2.538typ.538typ 0.588typ 0.588typ 0.29typ 0.29typ 0.45typ 0.45typ EFFICIENCY[%] *2 8typ 8typ 85typ 85typ 86typ 86typ 86typ 86typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2 LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%).40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5 PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-30. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN60950-32.6X.0X9.mm [.28X0.28X0.5 inches] (WXHXD) / g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
SUCW6 External view.smd(type B) Adsorption area Recommended Pad and Hole dia. (TOP VIEW) type B 2. ±0.2 0.6 ±0. 32.6 [.28] 0.±0.4 8.6 [0.3] 9. 0.min 2.95 5.08±0.2 2.±0.2 [0.2] [0.2].4.3.9 3.2 2 3.2 [0.3] [0.08] [0.3] 35.38 [.39] type C Pin terminal part details.8 ±0.3 (0-0 ) 0.8min Coplanarity within 0. 33.8 ±0.6 [.33] 2.95 [0.2] -f0.9 f.6 Unit : 0.inch Dimensions in mm, [ ]=inches 2.±0.2 0.6±0. 3.68±0.25 [0.4] 2.DIP(type C) 8.6 [0.3] 9. 32.6 0.min [.28] 5.08±0.2 [0.2] 2. ±0.2 2.85 [0.] Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : g max 30.48 [.2] 2.85 [0.] SU.SUC/SUT-3.
DC-DC Converters PCB Mount Type SUCW0 Ordering information SUC W 0 2 2 B P -O 2 3 4 5 6 8 R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray(SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW0052 SUCW0055 SUCW022 SUCW025 SUCW0242 SUCW0245 SUCW0482 SUCW0485 MAX OUTPUT WATTAGE[W] 0.8 0.5 0.8 0.5 0.8 0.5 0.8 0.5 DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] 0.45 0.35 0.45 0.35 0.45 0.35 0.45 0.35 SPECIFICATIONS MODEL SUCW0052 SUCW0055 SUCW022 SUCW025 SUCW0242 SUCW0245 SUCW0482 SUCW0485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2 2.5typ 2.44typ.05typ.02typ 0.523typ 0.509typ 0.262typ 0.254typ EFFICIENCY[%] *2 86typ 86typ 86typ 86typ 86typ 86typ 86typ 86typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] 0.45 0.35 0.45 0.35 0.45 0.35 0.45 0.35 LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%).40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5.40-2.60 4.25-5.5 PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-32. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN60950-40.2X.0X22.0mm [.58X0.28X0.8 inches] (WXHXD) / 0g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
SUCW0 External view.smd(type B) Adsorption area Compornent area Recommended Pad and Hole dia. (TOP VIEW) type B 5.24 ±0.2 [0.6] Pin terminal part details 0.6 ±0. 40.2 [.58] 2.5 [0.85] 22 [0.8] 0.±0.4 0.min 0.min 3.03.62 ±0.2 3.3 [0.2] 5.24 ±0.2 [0.6].4.3.9 3.2 2 [0.08] 3.2 [0.3] 43 [0.3] [.69] type C.8±0.3 (0-0 ) 0.8min.2 4.4±0.6 [.63] 3.3 [0.2] Coplanarity within 0. -f0.9 f.6 Unit : 0.inch Dimensions in mm, [ ]=inches 5.24±0.2 [0.6] 0.6 ±0. 2.DIP(type C) 3.68±0.25 [0.4] 40.2 [.58] 2.5 [0.85] 22 [0.8] Compornent area.62 ±0.2 5.24 ±0.2 [0.6] 3.03 [0.2] Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 0g max S [0.2].2 38. [.5] SU.SUC/SUT-33.