pvc-u section guide application guide standards and approvals

pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations. It has excellent chemical resistance which, when combined with smoothness of bore, eliminates build up of scale and gives good flow characteristics. It is odourless and tasteless, and is suitable for conveying potable water and many food or dairy products. PVC-U is suitable for use at temperatures from 0 C to 60 C at a wide range of operating pressures, depending upon the system chosen. It is lightweight and easy to install, using cold solvent welded joints which require no special tools. application guide Temperature range 0 C to 60 C Abrasion resistant Non-toxic and taint free Rigid pipes - no special support needed Ideal for above and below ground use Resistant to many inorganic chemicals Threading possible Resistant to most solutions of acids, alkalis and salts Sizes from 1 /4" to 24" and 10mm to 630mm No special tools required for installation Jointing by cold solvent welding or rubber ring mechanical joints Not resistant to aromatic and chlorinated hydrocarbons standards and approvals We offer a wide range of systems to leading international standards: Pipe (inch sizes) : EN 1452 : ASTM D 1785 : ASTM D 2241 Pipe (mm sizes) : EN 1452 : DIN 8061/2 Fittings (inch sizes) : BS 4346 Part 1 : ASTM D2467 : ASTM D 2466 Fittings (mm sizes) : DIN 8063 Threaded Fittings : BS21/DIN 2199/ISO 727 : ASTM D 2464 Pipes, fittings and solvent cements are WRAS listed for use in contact with cold potable water. section guide Pipe - Inch Size 28 Solvent Cement, Primer, Cleaner 31 Plain Fittings - Inch Size 32 Flanges - Inch Size 42 Adaptor Fittings - Inch Size 44 Threaded Fittings - Inch Size 52 Solvent Cement, Primer, Cleaner 57 Saddles - Inch Size 58 Clear Pipe & Fittings 62 FlexFit Flexible Pipe & Fittings 64 Hose Insert Fittings 66 Pipe - mm Size 68 Plain Fittings - mm Size 71 Flanges - mm Size 77 Adaptor Fittings - mm Size 79 Saddles - mm Size 84 Basket Strainer 86 Ball Valve, Double Union 88 Ball Valve Brackets, Double Union 88 Ball Valve, True Union 91 Ball Valve Brackets, True Union 92 Dosing Valve 92 Ball Valve, Economy Compact 94 Ball Valve, Economy Utility 94 Ball Valve, Single Union 95 Ball Valve, Economy Double Union 97 Ball Valve, T-Port 98 Ball Valve, L-Port 99 Butterfly Valve 104 Diaphragm Valve 108 Plug Gate Valve 110 Gauge Guard 110 Y-Pattern Valve 113 Slide Gate Valve 114 Gate Valve 115 Needle Valve 115 Non-Return Valve, Check 117 Air Release Valve 118 Foot Valve 121 Non-Return Valve, Wafer Check 122 Swing Check Valve 126 Line Strainer 126 Y-Strainer 127 Ball Valve, Electrically Actuated 128 Ball Valve, Pneumatically Actuated 131 Ball Valve, T-Port, Electrically Actuated 134 Diaphragm Valve, Actuated 136 Butterfly Valve, Electrically Actuated 140 Butterfly Valve, Pneumatically Actuated 142 Pressure Reducing Valve 146 Pressure Relief Valve 150 IPS Flow Systems Seaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222 E-mail: sales@ipsflowsystems.com Website: www.ipsflowsystems.com

inch and mm sizes Praher Type S4 Ball Valve with Actuator Adaptor Kit Includes: PVC-U Ball Valve, PVC-U Valve Bracket, Console, Actuator Adaptor, Screw Set, PVDF Shaft Size Code Price 3 /8 122.171 88.03 1 /2 122.172 89.64 3 /4 122.173 97.56 1 122.174 108.95 1 1 /4 122.175 143.61 1 1 /2 122.176 157.87 2 122.177 175.20 2 1 /2 122.359 294.05 3 122.761 343.58 4 122.762 418.48 16 122.357 88.03 20 122.358 89.64 25 122.256 97.56 32 122.238 108.95 40 122.237 143.61 50 122.257 157.87 63 122.898 175.20 75 122.359 294.05 90 122.258 343.58 110 122.360 418.48 Prices on request for BSP threaded sockets or PN10 flanged connections Size Code Price 3 /8 120.832 106.46 1 /2 120.833 106.98 3 /4 120.834 114.90 1 120.835 126.29 1 1 /4 120.836 164.06 1 1 /2 120.837 178.30 2 120.838 199.36 2 1 /2 120.839 335.53 3 120.840 407.35 4 120.841 482.25 16 125.449 106.46 20 125.450 106.98 25 125.451 114.90 32 122.804 126.29 40 125.235 164.06 50 125.452 178.30 63 125.453 199.36 75 125.381 335.53 90 122.263 407.35 110 on application Praher Valve Bracket for Type S4 Ball Valve Includes: PVC-U Valve Bracket, Screws and Nuts Size Code Price 3 /8 /16 170.276 19.87 1 /2 /20 170.276 19.87 3 /4 /25 170.277 21.17 1 /32 170.278 22.46 1 1 /4 /40 170.229 23.89 1 1 /2 /50 170.231 25.33 2 /63 170.233 26.74 2 1 /2 /75 170.266 38.82 3 /90 170.267 43.36 4 /110 170.267 43.36 Actuator Mounting Dimensions F G X Y ød B A Size OD mm 20 25 32 40 50 63 75 90 110 Size DN mm 15 20 25 32 40 50 65 80 80 Size NB inches 1/2 3/4 1 1 1 /4 1 1 /2 2 2 1 /2 3 4 A mm 60,0 60,0 60,0 94,0 94,0 94,0 95,0 95,0 95,0 B mm 70,0 70,0 70,0 93,0 93,0 93,0 119,0 119,0 119,0 F mm 11,0 11,0 11,0 14,0 14,0 14,0 17,0 17,0 17,0 R mm 42,0 42,0 42,0 50,0 50,0 50,0 70,0 70,0 70,0 X mm 38,0 38,0 38,0 48,0 48,0 48,0 72,5 72,5 72,5 Y mm 11,0 11,0 11,0 13,0 13,0 13,0 18,0 18,0 18,0 Type F04 F04 F04 F05 F05 F05 F07 F07 F07 88

Praher Type S4 Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 3 /8 /16mm to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar; 4 /100mm - 6 bar Fluid Temperature Range: 0 C - 60 C Seats: PTFE End Connections: Solvent Sockets, Solvent Spigots, BSP Female Threaded, HDPE Fusion Spigots, Flanged PN10 or ASA150 Option: Silicon-free Features: Lockable handle and tagging point included 3 /8 12.1939 27.52 1 /2 12.1760 28.95 3 /4 12.2073 34.15 1 12.2069 42.47 1 1 /4 12.2077 54.53 1 1 /2 12.1107 64.79 2 12.1108 78.16 2 1 /2 12.1128 159.04 3 12.0362 195.38 4 12.2143 266.13 BSP Threaded Sockets 3 /8 12.1479 32.85 1 /2 12.1480 34.15 3 /4 12.2148 40.64 1 12.2149 50.37 1 1 /4 12.2150 63.61 1 1 /2 12.0302 75.17 2 12.0300 89.97 2 1 /2 12.1129 182.40 3 12.1490 230.44 4 12.2792 304.44 BSP Threaded Sockets 3/8 12.1132 30.26 1/2 12.1134 31.55 3/4 12.1136 37.65 1 12.1138 46.61 1 1 /4 12.1140 59.46 1 1 /2 12.1142 71.02 2 12.1144 86.35 2 1 /2 12.1146 173.97 3 12.1148 217.46 MM Solvent Cement Sockets 3/8 12.1133 35.70 1/2 12.1135 37.00 3/4 12.1137 44.27 1 12.1139 54.53 1 1 /4 12.1141 68.81 1 1 /2 12.1143 81.79 2 12.1145 98.54 2 1 /2 12.1147 197.33 3 12.1149 253.80 MM Solvent Cement Sockets 16 12.1116 27.52 20 12.1118 28.95 25 12.1120 34.15 32 12.1122 42.47 40 12.1124 54.53 50 12.1048 64.79 63 12.1049 78.16 75 12.1128 159.04 90 12.1130 195.38 110 12.1746 266.13 Flanged PN10 * Flanged PN10 * 16 12.1117 32.85 20 12.1119 34.15 25 12.1121 40.64 32 12.1123 50.37 40 12.1125 63.61 50 12.1126 75.17 63 12.1127 89.97 75 12.1129 182.40 90 12.1131 230.44 110 12.1747 304.44 1 /2 12.1760NP 54.87 3 /4 12.2073NP 60.69 1 12.2069NP 71.53 1 1 /4 12.2077NP 88.73 1 1 /2 12.1107NP 105.07 2 12.1108NP 130.09 2 1 /2 12.1128NP 239.05 3 12.0362NP 317.44 4 12.2143NP 405.62 1 /2 12.1480NP 60.07 3 /4 12.2148NP 67.18 1 12.2149NP 79.44 1 1 /4 12.2150NP 97.82 1 1 /2 12.0302NP 115.46 2 12.0300NP 141.89 2 1 /2 12.1129NP 262.42 3 12.1490NP 352.49 4 12.2792NP 443.92 HDPE Fusion Spigots HDPE Fusion Spigots 16 12.5357 29.97 20 12.5358 31.57 25 12.5359 38.53 32 12.5360 49.24 40 12.5361 64.76 50 12.5362 76.53 63 12.5363 85.63 75 12.5364 193.21 90 12.5365 238.16 110 12.5366 323.25 16 12.6213 34.99 20 12.6214 36.61 25 12.6215 44.96 32 12.6216 56.84 40 12.6217 73.65 50 12.6218 86.70 63 12.6219 97.19 75 12.6220 248.34 90 12.6221 272.42 110 12.6222 360.73 * ASA 150 Flanges on request 89

Spears Valve Bracket Includes: Polypropylene Valve Bracket, Screws and Nuts. Suitable for use on Spears True Union 2000 Ball Valve Valve Size 1/2 " /20mm TUMB2-005 34.28 3 /4 " /25mm TUMB2-007 36.35 1 " /32mm TUMB2-010 39.09 1 1 /4 " /40mm TUMB2-012 40.90 1 1 /2 " /50mm TUMB2-015 44.14 2 " /63mm TUMB2-020 49.20 3 " /90mm TUMB2-030 93.34 4 " /110mm TUMB2-040 114.11 Spears Actuator Mounting Platform Includes: Polypropylene Mounting Platform, Screws and Nuts. Suitable for use with Spears True Union 2000 Ball Valve Valve Size 1/2 " /20mm MMP1-005 14.54 3 /4 " /25mm MMP1-007 15.06 1 " /32mm MMP1-010 17.53 1 1 /4 " /40mm MMP1-012 19.21 1 1 /2 " /50mm MMP1-015 26.22 2"/63mm MMP1-020 29.60 3"/90mm MMP1-030 66.73 4"/110mm MMP1-040 76.85 Spears Ball Valve Round Safety Handle Suitable for use on Spears True Union, Single Union or Compact Ball Valve. True Union 2000 Single Union & Valve Size Ball Valves Compact Ball Valves* 1 /2 18-24-00528 99-24-00528 10.13 3/4 18-24-00728 99-24-00728 12.20 1 18-24-01028 99-24-01028 12.93 1 1 /4 18-24-01228 99-24-01228 15.31 1 1 /2 18-24-01528 99-24-01528 15.31 2 18-24-02028 99-24-02028 19.87 2 1 /2 & 3 18-24-03028 99-24-03028 42.47 4 18-24-04028 99-24-04028 57.12 Spears Ball Valve Stem Extension Kit Does not include extension pipe. * Also Spears True Union Ball Valve (old style) Valve Size True Union 2000 Ball Valves Single Union & Compact Ball Valves* 1 /2 BVSE2-005-000 BVSE-005-000 7.85 3 /4 BVSE2-007-000 BVSE-007-000 8.70 1 BVSE2-010-000 BVSE-010-000 8.70 1 1 /4 BVSE2-012-000 BVSE-012-000 14.16 1 1 /2 BVSE2-015-000 BVSE-015-000 16.09 2 BVSE2-020-000 BVSE-020-000 17.40 2 1 /2 & 3 BVSE2-030-000 BVSE-030-000 17.79 4 BVSE2-040-000 BVSE-040-000 24.41 90

Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All sizes flanged - 10 bar Fluid Temperature Range: 0 C - 60 C Seats: PTFE End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female Threaded, Flanged Features: Sizes 1 /2 to 2 Solvent Socket valves also include NPT Female Threaded end connections. All valves are assembled with silicon-free, water soluble lubricant Option: T-Handle operation on 6 valve 1 /2 1829-005 31.94 3 /4 1829-007 37.78 1 1829-010 44.92 1 1 /4 1829-012 62.06 1 1 /2 1829-015 74.78 2 1829-020 98.66 2 1 /2 1822-025 190.20 3 1822-030 250.55 4 1822-040 422.57 6 1822-060 1387.79 6* 18226-60 1387.79 *T-Handle operation 1 /2 1839-005 35.45 3 /4 1839-007 41.94 1 1839-010 49.98 1 1 /4 1839-012 79.33 1 1 /2 1839-015 83.08 2 1839-020 108.67 2 1 /2 1832-025 257.04 3 1832-030 277.82 4 1832-040 469.31 6 1832-060 1539.67 6* 18326-60 1539.67 *T-Handle operation Inch Solvent Cement Spigots Inch Solvent Cement Spigots 1 /2 1827-005 31.94 3/4 1827-007 37.78 1 1827-010 44.92 1 1 /4 1827-012 62.06 1 1 /2 1827-015 74.78 2 1827-020 98.66 2 1 /2 1827-025 190.20 3 1827-030 250.55 4 1827-040 422.57 6 1827-060 1387.79 6* 18276-60 1387.79 *T-Handle operation 1 /2 1837-005 35.45 3 /4 1837-007 41.94 1 1837-010 49.98 1 1 /4 1837-012 79.33 1 1 /2 1837-015 83.08 2 1837-020 108.67 2 1 /2 1837-025 257.04 3 1837-030 277.82 4 1837-040 469.31 6 1837-060 1539.67 6* 18376-60 1539.67 *T-Handle operation Flanged ASA 150 Flanged ASA 150 1/2 1823-005 45.58 3 /4 1823-007 57.78 1 1823-010 69.84 1 1 /4 1823-012 82.05 1 1 /2 1823-015 103.35 2 1823-020 164.87 2 1 /2 1823-025 303.78 3 1823-030 335.59 4 1823-040 675.06 6 1823-060 2183.58 6* 18236-60 2183.58 *T-Handle operation 1/2 1833-005 48.69 3 /4 1833-007 62.83 1 1833-010 75.17 1 1 /4 1833-012 91.14 1 1 /2 1833-015 112.42 2 1833-020 174.61 2 1 /2 1833-025 308.97 3 1833-030 416.72 4 1833-040 782.82 6 1833-060 2532.79 6* 18336-60 2532.79 *T-Handle operation Silicon Free Valves All Spears valves are assembled with a water soluble lubricant and are silicon free. 91

Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar All sizes flanged - 10 bar Seats: PTFE End Connections: Solvent Sockets, Solvent Spigots, Reinforced NPT Female Threaded, Flanged Features: Designed for Sodium Hypochlorite and other chemical applications Vented ball equalises internal fluid pressure assuring proper valve operation and long life 1 /2 1829V- 005 37.58 3 /4 1829V- 007 44.47 1 1829V- 010 52.97 1 1 /4 1829V- 012 73.28 1 1 /2 1829V- 015 88.27 2 1829V- 020 116.48 2 1 /2 1822V- 025 223.89 3 1822V- 030 295.19 4 1822V- 040 498.75 6 1822V- 060 1077.39 1 /2 1839V- 005 41.84 3 /4 1839V- 007 49.47 1 1839V- 010 59.00 1 1 /4 1839V- 012 93.54 1 1 /2 1839V- 015 97.99 2 1839V- 020 128.48 2 1 /2 1832V- 025 303.36 3 1832V- 030 327.99 4 1832V- 040 554.15 6 1832V- 060 1270.32 NPT Female Threaded Stainless Steel Reinforced NPT Female Threaded Stainless Steel Reinforced 1 /2 1821V- 005SR 38.40 3/4 1821V- 007SR 46.41 1 1821V- 010SR 54.92 1 1 /4 1821V- 012SR 79.12 1 1 /2 1821V- 015SR 94.55 2 1821V- 020SR 123.27 2 1 /2 1821V- 025SR 242.19 3 1821V- 030SR 313.49 4 1821V- 040SR 520.10 1 /2 1831V- 005 SR 42.64 3 /4 1831V- 007 SR 51.44 1 1831V- 010 SR 60.96 1 1 /4 1831V- 012 SR 99.38 1 1 /2 1831V- 015 SR 104.27 2 1831V- 020 SR 134.92 2 1 /2 1831V- 025 SR 321.65 3 1831V- 030 SR 346.28 4 1831V- 040 SR 575.52 ASV Stubbe ProfiDos 101 Dosing Ball Valve Description: In-line double union ball valve with flow indicator Maximum Fluid Pressure at 20 C: 16 bar Seats: PTFE End Connections: Solvent Sockets Features: Accurate flow control with visible indicator MM Solvent Cement Unions MM Solvent Cement Unions 20 132 661 56.87 25 132 662 65.78 32 132 663 74.19 40 132 664 79.13 20 132 673 60.33 25 132 674 71.34 32 132 675 75.25 40 132 676 81.51 1/2 132 661-1 56.87 3 /4 132 662-1 65.78 1 132 663-1 74.19 1 1 /4 132 664-1 79.13 1/2 132 673-1 60.33 3 /4 132 674-1 71.34 1 132 675-1 75.25 1 1 /4 132 676-1 81.51 92

Spears True Union 2000 Standard Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar All sizes flanged - 10 bar Fluid Temperature Range: 0 C - 60 C Seats: PTFE End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female Threaded, Flanged Features: Sizes 1 /2 to 2 Solvent Socket valves also include NPT Female Threaded end connections PTFE/HDPE Seats 1 /2 3629-005 25.59 3 /4 3629-007 30.26 1 3629-010 35.97 1 1 /4 3629-012 49.73 1 1 /2 3629-015 59.85 2 3629-020 78.94 2 1 /2 3622-025 151.25 3 3622-030 200.58 4 3622-040 338.18 PTFE/HDPE Seats 1 /2 3639-005 28.44 3 /4 3639-007 33.63 1 3639-010 39.99 1 1 /4 3639-012 63.49 1 1 /2 3639-015 66.46 2 3639-020 86.98 2 1 /2 3632-025 205.76 3 3632-030 222.65 4 3632-040 375.84 Inch Solvent Cement Spigots Inch Solvent Cement Spigots PTFE/HDPE Seats 1/2 3627-005 25.59 3/4 3627-007 30.26 1 3627-010 35.97 1 1 /4 3627-012 49.73 1 1 /2 3627-015 59.85 2 3627-020 78.94 2 1 /2 3627-025 151.25 3 3627-030 200.58 4 3627-040 338.18 PTFE/HDPE Seats 1 /2 3637-005 28.44 3/4 3637-007 33.63 1 3637-010 39.99 1 1 /4 3637-012 63.49 1 1 /2 3637-015 66.46 2 3637-020 86.98 2 1 /2 3637-025 205.76 3 3637-030 222.65 4 3637-040 375.84 Flanged ASA 150 Flanged ASA 150 PTFE/HDPE Seats 1 /2 3623-005 36.48 3 /4 3623-007 46.21 1 3623-010 55.95 1 1 /4 3623-012 65.69 1 1 /2 3623-015 82.70 2 3623-020 131.78 2 1 /2 3623-025 243.42 3 3623-030 251.86 4 3623-040 540.04 PTFE/HDPE Seats 1 /2 3633-005 38.94 3/4 3633-007 50.24 1 3633-010 60.11 1 1 /4 3633-012 72.95 1 1 /2 3633-015 89.97 2 3633-020 139.56 2 1 /2 3633-025 247.31 3 3633-030 333.64 4 3633-040 625.74 93

economy ball valves Spears Compact Ball Valve Description: In-line ball valve Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 3 to 6-10 bar Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150 1 /2 2122-005 15.45 3/4 2122-007 21.17 1 2122-010 22.98 1 1 /4 2122-012 41.28 1 1 /2 2122-015 41.28 2 2122-020 55.04 3 2122-030 179.15 4 2122-040 275.22 6 2122-060 357.00 1 /2 2132-005 17.40 3/4 2132-007 21.55 1 2132-010 25.83 1 1 /4 2132-012 45.84 1 1 /2 2132-015 45.84 2 2132-020 61.80 3 2132-030 200.58 4 2132-040 395.95 6 2132-060 513.44 NPT Female Threaded Sockets NPT Female Threaded Sockets 1/2 2121-005 15.45 3/4 2121-007 21.17 1 2121-010 22.98 1 1 /4 2121-012 41.28 1 1 /2 2121-015 41.28 2 2121-020 55.04 3 2121-030 179.15 4 2121-040 275.22 1/2 2131-005 17.40 3/4 2131-007 21.55 1 2131-010 25.83 1 1 /4 2131-012 45.84 1 1 /2 2131-015 45.84 2 2131-020 61.80 3 2131-030 200.58 4 2131-040 395.95 Spears Utility Ball Valve Description: In-line ball valve Maximum Fluid Pressure at 20 C: 10 bar (also available in white PVC-U) Seals: EPDM Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded NPT Threaded Sockets Inch Solvent Sockets 1 /2 2621-005G 7.21 1 /2 2622-005G 7.21 3 /4 2621-007G 8.56 3 /4 2622-007G 8.56 1 2621-010G 11.62 1 2622-010G 11.62 1 1 /4 2621-012G 15.45 1 1 /4 2622-012G 15.45 1 1 /2 2621-015G 23.50 1 1 /2 2622-015G 23.50 2 2621-020G 29.73 2 2622-020G 29.73 94

economy ball valves Praher Type S5 Ball Valve manual valves Description: In-line double union ball valve for water or weak chemicals Maximum Fluid Pressure at 20 C: Sizes up to 2 1 /2 /75mm - 10 bar; 3 /90mm - 6 bar Seats: HDPE or PTFE End Connections: Solvent Sockets, Solvent Spigots, BSP Female Threaded, HDPE Fusion Spigots Economy Valve - HDPE Seats Standard Valve - HDPE Seats 3/8 120.012 13.24 1 /2 122.880 13.24 3 /4 122.881 14.16 1 122.882 20.91 1 1 /4 122.883 22.58 1 1 /2 122.884 30.51 2 122.885 38.43 2 1 /2 122.147 116.97 3 122.886 155.14 3/8 120.002 18.31 1 /2 120.017 18.31 3 /4 122.074 20.65 1 122.070 22.08 1 1 /4 122.078 29.99 1 1 /2 120.077 37.78 2 120.107 51.15 2 1 /2 120.124 123.07 3 120.000 165.53 MM Solvent Cement Sockets MM Solvent Cement Sockets HDPE Seats 16 120.011 13.24 20 120.026 13.24 25 120.041 14.16 32 120.056 20.91 40 120.071 22.58 50 120.325 30.51 63 120.326 38.43 75 120.134 116.97 90 120.713 155.14 16 120.001 18.31 20 120.016 18.31 25 120.031 20.65 32 120.046 22.08 40 120.061 29.99 50 120.076 37.78 63 120.106 51.15 75 120.124 123.07 90 120.266 165.53 BSP Threaded Sockets BSP Threaded Sockets HDPE Seats 3/8 120.013 15.31 1 /2 120.028 15.31 3/4 120.043 17.01 1 120.058 24.55 1 1 /4 120.073 27.01 1 1 /2 120.091 35.06 2 120.120 44.02 2 1 /2 120.136 131.78 3 120.264 176.55 3/8 120.003 20.25 1 /2 120.018 20.25 3/4 120.033 23.77 1 120.048 25.70 1 1 /4 120.063 34.41 1 1 /2 120.082 42.58 2 120.108 57.12 2 1 /2 120.126 137.60 3 120.263 187.60 Spears Single Union Ball Valve Description: In-line ball valve with one union connection Maximum Fluid Pressure at 20 C: Sizes 1 /2-2 16 bar; sizes 3-4 - 10 bar Fluid Temperature Range: 0 C - 60 C (Also available in white PVC-U) Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded 1 /2 2422-005G 16.09 3 /4 2422-007G 20.25 1 2422-010G 23.89 1 1 /4 2422-012G 33.11 1 1 /2 2422-015G 33.11 2 2422-020G 48.29 3 2422-030G 187.60 4 2422-040G 351.81 1 /2 2432-005G 17.92 3 /4 2432-007G 22.58 1 2432-010G 26.48 1 1 /4 2432-012G 36.75 1 1 /2 2432-015G 36.75 2 2432-020G 53.62 3 2432-030G 216.16 4 2432-040G 382.97 95

ASV Stubbe Compact 16 Ball Valve Description: In-line one-piece ball valve Maximum Fluid Pressure at 20 C: Sizes 20 to 110-10 bar; sizes 140 to 160-6 bar. Ball: PE Seats: CSM or PTFE End Connections: Flanged BS4504 EN1072 PN10 (PP Steel Core Flanges) Features: Low maintenance, compact style. Full bore in all sizes. Flanged PN10 Flanged PN10 CSM Seats 63/2 51 643 134.76 75/2 1 /4 51 644 201.53 90/3 51 645 254.70 110/4 51 646 331.97 140/5 51 647 404.30 160/6 51 854 494.55 63/2 64 044 157.64 75/2 1 /4 62 299 223.79 90/3 61 349 273.24 110/4 61 157 343.71 140/5 67 964 479.71 160/6 57 675 506.92 Praher Laboratory Ball Valve Description: In-line ball valve with accessories Maximum Fluid Pressure at 20 C: 10 bar Seats: PTFE End Connections: BSP or NPT Threaded BSP male x BSP female EPDM seals NPT male x NPT female EPDM seals BSP male x BSP female FPM seals NPT male x NPT female FPM seals BSP hose nozzle NPT hose nozzle BSP male x BSP female EPDM seals BSP male x BSP female FPM seals 1 /4 122.353 19.99 1 /4 122.355 19.99 1 /4 122.354 24.80 1/4 122.356 24.80 1 /4 14.1144 3.83 1 /4 14.0203 3.83 3 /8 x 1 /4 122.751 19.99 3/8 x 1 /4 122.757 24.80 96

Durapipe VKD Double Union Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: 16 bar Fluid Temperature Range: 0ºC - 60ºC Seats: PTFE End Connections: Solvent Sockets Features: Safe blocked unions, multi-functional handle, easy actuator mounting platform and bracketing points included Options: Electric or pneumatic actuation 3 /8 H0 DKE 101 37.82 1 /2 H0 DKE 102 39.38 3/4 H0 DKE 103 46.40 1 H0 DKE 104 56.05 1 1 /4 H0 DKE 105 71.31 1 1 /2 H0 DKE 106 92.16 2 H0 DKE 107 116.93 2 1 /2 H0 DKE 108 251.94 3 H0 DKE 109 302.34 4 H0 DKE 110 415.70 1 /2 H0 DKF 102 47.01 3 /4 H0 DKF 103 55.74 1 H0 DKF 104 69.58 1 1 /4 H0 DKF 105 84.38 1 1 /2 H0 DKF 106 110.69 2 H0 DKF 107 151.78 2 1 /2 H0 DKF 108 302.34 3 H0 DKF 109 371.62 4 H0 DKF 110 472.39 MM Solvent Cement Sockets MM Solvent Cement Sockets 16 H0 DKE 305 37.82 20 H0 DKE 306 39.43 25 H0 DKE 307 46.42 32 H0 DKE 308 56.02 40 H0 DKE 309 71.30 50 H0 DKE 310 92.11 63 H0 DKE 311 116.97 75 H0 DKE 312 251.94 90 H0 DKE 313 302.34 110 H0 DKE 314 415.70 20 H0 DKF 306 47.01 25 H0 DKF 307 55.74 32 H0 DKF 308 69.58 40 H0 DKF 309 84.38 50 H0 DKF 310 110.69 63 H0 DKF 311 151.78 75 H0 DKF 312 302.34 90 H0 DKF 313 371.62 110 H0 DKF 314 472.39 BSP Female Threaded BSP Female Threaded 1/2 H0 DKE B02 42.35 3 /4 H0 DKE B03 50.28 1 H0 DKE B04 61.66 1 1 /4 H0 DKE B05 80.30 1 1 /2 H0 DKE B06 104.77 2 H0 DKE B07 133.42 2 1 /2 H0 DKE B08 259.98 3 H0 DKE B09 330.05 1 /2 H0 DKF B02 49.98 3 /4 H0 DKF B03 59.63 1 H0 DKF B04 75.19 1 1 /4 H0 DKF B05 93.37 1 1 /2 H0 DKF B06 123.30 2 H0 DKF B07 168.27 2 1 /2 H0 DKF B08 310.37 3 H0 DKF B09 399.33 Durapipe VKD Valve Actuator Bracket Size Dimensions Code Price 3 /8 /16 F03-04 x 11mm sq KTP QCP EF 30.08 1/2 /20 F03-04 x 11mm sq KTP QCP EF 30.08 3 /4 /25 F03-05 x 11mm sq KTP QCP GG 31.90 3 /4 /25 F04 x 11mm sq KTP QCP G4 31.90 1 /32 F03-05 x 11mm sq KTP QCP HH 31.90 1 /32 F04 x 11mm sq KTP QCP H4 31.90 1 1 /4 /40 F05-07 x 14mm sq KTP QCP I I 36.46 1 1 /2 /50 F05-07 x 14mm sq KTP QCP JJ 36.46 2 /63 F05-07 x 14mm sq KTP QCP LL 38.74 97

Praher Type S4 T-Port Ball Valve Description: In-line horizontal T-port 3-way ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: 16 bar Seats: PTFE End Connections: Solvent Sockets, BSP Female Thread, HDPE Fusion Spigots Option: Silicon-free 3 /8 12.0629 59.97 1 /2 12.0631 59.97 3/4 12.2995 61.02 1 12.2195 61.02 1 1 /4 12.2997 93.61 1 1 /2 12.2752 93.61 2 12.2754 117.49 3 /8 12.0674 79.44 1 /2 12.0676 79.44 3/4 12.0671 82.31 1 12.0657 82.31 1 1 /4 12.0778 121.26 1 1 /2 12.0773 122.29 2 12.0775 152.55 MM Solvent Cement Unions MM Solvent Cement Unions 16 12.0625 59.97 20 12.0627 59.97 25 12.1816 61.02 32 12.1774 61.02 40 12.2714 93.61 50 12.2715 93.61 63 12.2716 117.49 16 12.0667 79.44 20 12.0669 79.44 25 12.1831 82.31 32 12.0307 82.31 40 12.0767 121.26 50 12.0768 122.29 63 12.0769 152.55 BSP Threaded Sockets 3/8 12.0634 70.57 1 /2 12.0636 70.57 3 /4 12.0638 71.92 1 12.1815 71.92 1 1 /4 12.0939 107.95 1 1 /2 12.0940 109.56 2 12.0941 143.42 Durapipe TK 3-Way Ball Valve T-Port Description: In-line horzontal T-Port 3-way ball valve Maximum Fluid Pressure at 20 C: 16 bar Fluid Temperature Range: 0ºC - 60ºC Seats: PTFE End Connections: Solvent Sockets Options: L-Port; electric or pneumatic actuation 1 /2 H0 TKE 102 68.98 3 /4 H0 TKE 103 79.79 1 H0 TKE 104 98.28 1 1 /4 H0 TKE 105 110.43 1 1 /2 H0 TKE 106 134.92 2 H0 TKE 107 175.24 1/2 H0 TKP 102 89.66 3 /4 H0 TKP 103 105.20 1 H0 TKP 104 127.52 1 1 /4 H0 TKP 105 140.80 1 1 /2 H0 TKP 106 244.44 2 H0 TKP 107 306.13 MM Solvent Cement Sockets MM Solvent Cement Sockets 20 H0 TKE 306 68.98 25 H0 TKE 307 79.79 32 H0 TKE 308 98.28 40 H0 TKE 309 110.43 50 H0 TKE 310 134.92 63 H0 TKE 311 175.24 20 H0 TKP 306 89.66 25 H0 TKP 307 105.20 32 H0 TKP 308 127.52 40 H0 TKP 309 140.80 50 H0 TKP 310 244.44 63 H0 TKP 311 306.13 98

Praher Type S4 L-Port Ball Valve Description: In-line horizontal L-port 3-way ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: 16 bar Seats: PTFE End Connections: Solvent Sockets, BSP Female Thread, HDPE Fusion Spigots Option: Silicon-free 3 /8 12.0630 59.97 1/2 12.0633 59.97 3 /4 12.2996 61.02 1 12.1897 61.02 1 1 /4 12.2998 93.61 1 1 /2 12.2753 93.61 2 12.2755 117.49 3 /8 12.0675 79.44 1/2 12.0677 79.44 3 /4 12.0672 82.31 1 12.0658 82.31 1 1 /4 12.0779 121.26 1 1 /2 12.0774 122.29 2 12.0776 152.55 MM Solvent Cement Unions MM Solvent Cement Unions 16 12.0626 59.97 20 12.0628 59.97 25 12.1832 61.02 32 12.1833 61.02 40 12.2717 93.61 50 12.2718 93.61 63 12.2719 117.49 16 12.0668 79.44 20 12.0670 79.44 25 12.1834 82.31 32 12.1835 82.31 40 12.0770 121.26 50 12.0771 122.29 63 12.0772 152.55 BSP Threaded Sockets 3/8 12.0635 70.57 1 /2 12.0637 70.57 3 /4 12.0942 71.92 1 12.1836 71.92 1 1 /4 12.0937 107.95 1 1 /2 12.2877 109.56 2 12.0606 143.42 Praher Valve Bracket for Type S4 T or L-Port Ball Valve Size Code Price 3 /8 /16 17.0042 19.87 1 /2 /20 17.0042 19.87 3/4 /25 17.0022 21.17 1 /32 17.0022 21.17 1 1 /4 /40 17.0001 23.89 1 1 /2 /50 17.0001 23.89 2 /63 17.0018 26.74 Includes: PVC-U Valve Bracket, Screws and Nuts Valve shown complete with bracket 99

Spears 2000 Horizontal T-Port Ball Valve Description: In-line horizontal 3-way T-port ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150 1 /2 5022T1-005 71.02 3 /4 5022T1-007 84.65 1 5022T1-010 102.69 1 1 /4 5022T1-012 118.91 1 1 /2 5022T1-015 139.56 2 5022T1-020 170.73 2 1 /2 5022T1-025 575.10 3 5022T1-030 586.79 4 5022T1-040 1063.24 1 /2 5032T1-005 76.99 3 /4 5032T1-007 91.14 1 5032T1-010 113.09 1 1 /4 5032T1-012 134.36 1 1 /2 5032T1-015 152.55 2 5032T1-020 199.27 2 1 /2 5032T1-025 611.45 3 5032T1-030 621.19 4 5032T1-040 1074.91 NPT Female Threaded NPT Female Threaded Sockets 1 /2 5021T1-005SR 73.35 3 /4 5021T1-007SR 87.50 1 5021T1-010SR 105.41 1 1 /4 5021T1-012SR 124.37 1 1 /2 5021T1-015SR 148.65 2 5021T1-020SR 179.80 2 1 /2 5021T1-025SR 600.43 3 5021T1-030SR 613.41 4 5021T1-040SR 1091.78 1 /2 5031T1-005SR 80.49 3 /4 5031T1-007SR 93.99 1 5031T1-010SR 115.94 1 1 /4 5031T1-012SR 139.56 1 1 /2 5031T1-015SR 161.63 2 5031T1-020SR 209.00 2 1 /2 5031T1-025SR 636.77 3 5031T1-030SR 646.50 4 5031T1-040SR 1103.47 Flanged ASA 150 Flanged ASA 150 1 /2 5023T1-005 145.40 3 /4 5023T1-007 151.89 1 5023T1-010 216.16 1 1 /4 5023T1-012 408.93 1 1 /2 5023T1-015 421.28 2 5023T1-020 547.20 2 1 /2 5023T1-025 960.67 3 5023T1-030 973.65 4 5023T1-040 1413.75 1 /2 5033T1-005 151.89 3 /4 5033T1-007 160.33 1 5033T1-010 236.27 1 1 /4 5033T1-012 432.95 1 1 /2 5033T1-015 440.75 2 5033T1-020 574.46 2 1 /2 5033T1-025 1125.54 3 5033T1-030 1130.73 4 5033T1-040 1544.86 100

Spears 2000 Horizontal L-Port Ball Valve Description: In-line horizontal 3-way L-port ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150 1 /2 5022L1-005 71.02 3 /4 5022L1-007 84.65 1 5022L1-010 102.69 1 1 /4 5022L1-012 118.91 1 1 /2 5022L1-015 139.56 2 5022L1-020 170.73 2 1 /2 5022L1-025 575.10 3 5022L1-030 586.79 4 5022L1-040 1063.24 1 /2 5032L1-005 76.99 3 /4 5032L1-007 91.14 1 5032L1-010 113.09 1 1 /4 5032L1-012 134.36 1 1 /2 5032L1-015 152.55 2 5032L1-020 199.27 2 1 /2 5032L1-025 611.45 3 5032L1-030 621.19 4 5032L1-040 1074.91 NPT Female Threaded NPT Female Threaded Sockets 1 /2 5021L1-005SR 73.35 3 /4 5021L1-007SR 87.50 1 5021L1-010SR 105.41 1 1 /4 5021L1-012SR 124.37 1 1 /2 5021L1-015SR 148.65 2 5021L1-020SR 179.80 2 1 /2 5021L1-025SR 600.43 3 5021L1-030SR 613.41 4 5021L1-040SR 1091.78 1 /2 5031L1-005SR 80.49 3 /4 5031L1-007SR 93.99 1 5031L1-010SR 115.94 1 1 /4 5031L1-012SR 139.56 1 1 /2 5031L1-015SR 161.63 2 5031L1-020SR 209.00 2 1 /2 5031L1-025SR 636.77 3 5031L1-030SR 646.50 4 5031L1-040SR 1103.47 Flanged ASA 150 Flanged ASA 150 1 /2 5023L1-005 145.40 3/4 5023L1-007 151.89 1 5023L1-010 216.16 1 1 /4 5023L1-012 408.93 1 1 /2 5023L1-015 421.28 2 5023L1-020 547.20 2 1 /2 5023L1-025 960.67 3 5023L1-030 973.65 4 5023L1-040 1413.75 1 /2 5033L1-005 151.89 3/4 5033L1-007 160.33 1 5033L1-010 236.27 1 1 /4 5033L1-012 432.95 1 1 /2 5033L1-015 440.75 2 5033L1-020 574.46 2 1 /2 5033L1-025 1125.54 3 5033L1-030 1130.73 4 5033L1-040 1544.86 3-Way Port Options Vertical Horizontal Single L-Port Double L-Port Triple L-Port T-Port L-Port T-Port 101

Spears 2000 Vertical T-Port Ball Valve Description: In-line vertical 3-way T-port ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150 1 /2 4722T1-005 70.62 3 /4 4722T1-007 82.83 1 4722T1-010 100.74 1 1 /4 4722T1-012 121.77 1 1 /2 4722T1-015 140.85 2 4722T1-020 173.30 2 1 /2 4722T1-025 607.55 3 4722T1-030 619.90 4 4722T1-040 1072.31 1 /2 4732T1-005 76.47 3 /4 4732T1-007 90.36 1 4732T1-010 112.17 1 1 /4 4732T1-012 144.09 1 1 /2 4732T1-015 154.49 2 4732T1-020 200.58 2 1 /2 4732T1-025 614.70 3 4732T1-030 625.74 4 4732T1-040 1082.71 NPT Threaded Sockets NPT Threaded Sockets 1 /2 4721T1-005SR 71.80 3/4 4721T1-007SR 85.68 1 4721T1-010SR 103.59 1 1 /4 4721T1-012SR 127.48 1 1 /2 4721T1-015SR 149.95 2 4721T1-020SR 183.04 2 1 /2 4721T1-025SR 632.88 3 4721T1-030SR 645.21 4 4721T1-040SR 1100.88 1 /2 4731T1-005SR 77.63 3/4 4731T1-007SR 93.09 1 4731T1-010SR 114.89 1 1 /4 4731T1-012SR 149.29 1 1 /2 4731T1-015SR 163.57 2 4731T1-020SR 210.31 2 1 /2 4731T1-025SR 640.01 3 4731T1-030SR 651.70 4 4731T1-040SR 1111.26 Flanged ASA 150 Flanged ASA 150 1 /2 4723T1-005 146.05 3 /4 4723T1-007 153.19 1 4723T1-010 218.74 1 1 /4 4723T1-012 412.18 1 1 /2 4723T1-015 427.77 2 4723T1-020 551.09 2 1 /2 4723T1-025 964.56 3 4723T1-030 977.54 4 4723T1-040 1421.53 1 /2 4733T1-005 151.25 3 /4 4733T1-007 159.68 1 4733T1-010 236.93 1 1 /4 4733T1-012 435.55 1 1 /2 4733T1-015 440.75 2 4733T1-020 575.10 2 1 /2 4733T1-025 1124.24 3 4733T1-030 1132.03 4 4733T1-040 1489.04 102

Spears 2000 Vertical L-Port Ball Valve Description: In-line vertical 3-way L-port ball valve with lockable handle and union ends Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar Seats: PTFE End Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150 1 /2 4722L1-005 70.62 3 /4 4722L1-007 82.83 1 4722L1-010 100.74 1 1 /4 4722L1-012 121.77 1 1 /2 4722L1-015 140.85 2 4722L1-020 173.31 2 1 /2 4722L1-025 607.55 3 4722L1-030 619.90 4 4722L1-040 1072.31 1 /2 4732L1-005 76.47 3 /4 4732L1-007 90.36 1 4732L1-010 112.17 1 1 /4 4732L1-012 144.09 1 1 /2 4732L1-015 154.49 2 4732L1-020 200.58 2 1 /2 4732L1-025 614.70 3 4732L1-030 625.74 4 4732L1-040 1082.71 NPT Threaded Sockets NPT Threaded Sockets 1 /2 4721L1-005SR 71.80 3/4 4721L1-007SR 85.68 1 4721L1-010SR 103.59 1 1 /4 4721L1-012SR 127.48 1 1 /2 4721L1-015SR 149.95 2 4721L1-020SR 183.04 2 1 /2 4721L1-025SR 632.88 3 4721L1-030SR 645.21 4 4721L1-040SR 1100.88 1 /2 4731L1-005SR 77.63 3/4 4731L1-007SR 93.09 1 4731L1-010SR 114.89 1 1 /4 4731L1-012SR 149.29 1 1 /2 4731L1-015SR 163.57 2 4731L1-020SR 210.31 2 1 /2 4731L1-025SR 640.01 3 4731L1-030SR 651.70 4 4731L1-040SR 1111.26 Flanged ASA 150 Flanged ASA 150 1 /2 4723L1-005 146.05 3/4 4723L1-007 153.19 1 4723L1-010 218.74 1 1 /4 4723L1-012 412.18 1 1 /2 4723L1-015 427.77 2 4723L1-020 551.09 2 1 /2 4723L1-025 964.56 3 4723L1-030 977.54 4 4723L1-040 1421.53 1 /2 4733L1-005 151.25 3/4 4733L1-007 159.68 1 4733L1-010 236.93 1 1 /4 4733L1-012 435.55 1 1 /2 4733L1-015 440.75 2 4733L1-020 575.10 2 1 /2 4733L1-025 1124.24 3 4733L1-030 1132.03 4 4733L1-040 1489.04 Additional L-Port Options The Spears 2000 Vertical L-Port Ball Valve is also available at additional cost with: - Double L-Port Function - Triple L-Port Function Please enquire for details and prices. 103

Praher Type S4 Butterfly Valve Description: Wafer style butterfly valve, between flanges to BS4504 EN1072 PN10 Maximum Fluid Pressure at 20 C: Sizes 3 /90mm to 5 /140mm - 10 bar; sizes 6 /160mm and 8 /225mm - 6 bar Body and Disc: PVC-U Shaft: Stainless Steel 304 End Connections: Flange mounted (flanges not included) Option: Silicon-free Lever Operated 3/90 12.1919 146.05 4/110 12.1892 159.68 5/140 12.2001 188.89 6/160 12.1871 216.80 8/225 12.1872 277.17 3/90 12.1923 252.50 4/110 12.1924 275.22 5/140 12.2192 326.51 6/160 12.1925 374.53 8/225 12.1926 479.04 Gear Operated 3/90 12.2322 461.52 4/110 12.2321 475.80 5/140 12.2320 525.78 6/160 12.2319 538.76 8/225 12.2318 614.04 3/90 12.2393 497.86 4/110 12.2394 514.75 5/140 12.2395 580.29 6/160 12.2396 586.15 8/225 12.2397 676.36 Implex Economy Butterfly Valve Description: Wafer style butterfly valve Maximum Fluid Pressure at 20 C: Sizes 2 /63mm to 5 /140mm - 10 bar; Sizes 6 /160mm to 10 /250mm - 6 bar Fluid Temperature Range: 0 C-50 C Body and Disc: PVC-U Seals: EPDM Shaft: Plated Steel End Connections: Flanged Lever Operated Valve shown flanged style Wafer Style 2/63 09626 94.64 2 1 /2/75 09627 98.41 3/90 09628 112.04 4/110 09629 123.21 125 09630 141.51 5/140 09631 146.05 6/160 09632 168.12 8/225 09633 242.45 10/250 09634 465.40 Lever Operated Lever Operated Flanged PN10 3 09071 149.95 4 09072 171.36 6 09074 296.64 8 09075 419.97 Flanged PN10 63 09640 99.19 75 09641 106.97 90 09642 149.95 110 09643 171.36 125 09644 204.48 140 09645 223.95 160 09646 296.64 200 09647 419.97 225 09648 419.97 250 09649 829.56 104

Spears Butterfly Valve Description: Wafer style butterfly valve, between flanges to ASA 150 Maximum Fluid Pressure at 20 C: 10 bar Body and Disc: PVC-U Disc: Glass Reinforced PVC-U Shaft: Stainless Steel 316 End Connections: Flange mounted (flanges not included) Lever Operated 1 1 /2 722311-015 167.79 2 722311-020 182.40 2 1 /2 722311-025 192.78 3 722311-030 194.09 4 722311-040 207.07 6 722311-060 306.37 8 722311-080 579.00 1 1 /2 723311-015 292.10 2 723311-020 298.59 2 1 /2 723311-025 314.17 3 723311-030 330.40 4 723311-040 356.37 6 723311-060 499.17 8 723311-080 642.61 Also available bare shaft for remote or actuator mounting. Please enquire for details. Gear Operated 1 1 /2 722321-015 515.39 2 722321-020 522.54 3 722321-030 538.11 4 722321-040 564.72 6 722321-060 678.95 8 722321-080 916.53 10 722321-100 1239.79 12 722321-120 1708.43 1 1 /2 723321-015 720.50 2 723321-020 726.99 3 723321-030 767.23 4 723321-040 785.41 6 723321-060 1029.48 8 723321-080 1235.89 10 723321-100 2737.92 12 723321-120 4924.09 Durapipe FK Butterfly Valve Description: Wafer style butterfly valve Mounting: In ant position, between flanges to BS4504 PN10; BS10 table D/E, or ASA 150 Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0ºC - 60ºC Body: Glass reinforced polypropylene Disc: PVC-U Seals: EPDM, FPM or NBR End Connections: Flange mounted (Flanges not included) Options: Lever or gear operation; electric or pneumatic actuation Lever Operated Gear Operated 1 1 /2/50 H0 FKE 106 123.64 2/63 H0 FKE 107 130.41 2 1 /2/75 H0 FKE 108 143.23 3/90 H0 FKE 109 157.85 4/110 H0 FKE 110 191.18 5/140 H0 FKE 111 247.54 6/160 H0 FKE 112 304.38 8/225 H0 FKE 113 453.03 2 1 /2/75 HV FKE 108 354.60 3/90 HV FKE 109 369.23 4/110 HV FKE 110 402.55 5/140 HV FKE 111 458.89 6/160 HV FKE 112 515.73 8/225 HV FKE 113 711.62 10/250 HV FKE 114 1233.63 12/315 HV FKE 115 1330.74 Lever Operated Gear Operated 1 1 /2/50 H0 FKF 106 149.50 2 1 /2/75 HV FKF 108 387.29 2/63 H0 FKF 107 158.43 3/90 HV FKF 109 395.86 2 1 /2/75 H0 FKF 108 175.93 4/110 HV FKF 110 431.67 3/90 H0 FKF 109 184.49 5/140 HV FKF 111 488.47 4/110 H0 FKF 110 220.30 6/160 HV FKF 112 551.55 5/140 H0 FKF 111 277.12 8/225 HV FKF 113 755.20 6/160 H0 FKF 112 340.17 10/250 HV FKF 114 2106.53 8/225 H0 FKF 113 496.63 12/315 HV FKF 115 2280.72 105

Clamp Union Check Valve Description: Swing Check Valve with Clamp Union Connections Maximum Fluid Pressure at 20 C: Sizes 2 /63mm to 6 /160mm 10 bar Body and Disc: Polypropylene - Glass Fibre Reinforced Seals: EPDM End Connections: Clamp Unions in PVC-U or PE Inch Clamp Union Connections MM Clamp Union Connections 3 15120 182.24 90 15020 182.24 4 15121 199.91 110 15021 199.91 5 15023 443.45 125 15022 420.90 6 15124 490.80 140 15023 443.45 160 15024 490.80 Clamp Union Sight Glass Description: Clear Sight Glass with Clamp Union Connections Maximum Fluid Pressure at 20 C: Sizes 2 /63mm to 6 /160mm 10 bar Fluid Temperature Range: 0 C - 60 C Body: Clear PVC-U Seals: EPDM End Connections: Clamp Unions in PVC-U or PE Inch Clamp Union Connections MM Clamp Union Connections 3 18038 75.10 40 18004 47.38 4 18039 85.41 50 18005 47.38 5 18011 125.53 63 18006 57.21 6 18042 190.90 75 18007 70.26 90 18008 75.10 110 18009 85.41 125 18010 98.31 140 18011 125.53 160 18012 190.90 200 18013 281.31 Clamp Unions PVC-U Inch Clamp Union Connections 1 1 /4 10333 23.30 1 1 /2 10334 25.10 2 10335 31.09 2 1 /2 10336 38.40 3 10337 50.23 4 10338 55.25 5 10340 98.40 6 10341 116.27 8 10342 191.16 PVC-U MM Clamp Union Connections 40 10371 16.96 50 10372 20.54 63 10373 26.73 75 10374 33.08 90 10327 42.90 110 10328 50.97 125 10329 65.87 140 10330 87.21 160 10331 105.36 200 10332 180.33 225 10375 182.01 106

Clamp Union Butterfly Valve Description: Butterfly Valve with Clamp Union Connections Maximum Fluid Pressure at 20 C: Sizes 2 /63mm to 5 /140mm 10 bar; size 6 /160mm - 6 bar Body and Disc: PVC-U Seals: EPDM Shaft: Plated Steel End Connections: Clamp Unions in PVC-U or PE Inch Clamp Union Connections Lever Operated 3 19N012 162.93 4 19N013 185.64 5 19N025 242.76 6 19N016 321.95 8 19N017 436.46 MM Clamp Union Connections Lever Operated 63 19N020 120.09 75 19N021 120.09 90 19N022 162.93 110 19N023 185.64 125 19N024 221.98 140 19N025 242.76 160 19N026 321.95 200 19N027 436.46 225 19N028 436.46 Valve Only Lever Operated 63/75 19N001 108.18 90 19N002 117.61 110 19N003 129.31 125 19N004 148.65 140 19N005 153.19 160 19N006 176.55 200/225 19N007 257.31 Modular Product Design The Netvitc System Clamp Union is a quick assembly unit that can be used to assemble PVC-U pipes or for easy connections to butterfly valves, sight glasses and check valves. The compact design allows for installation in cramped conditions, where flanges would be too large. Lightweight, the clamp union provides a significant weight saving over bolted flanges. 107

Praher Diaphragm Valve Mounting Plate Ensures clearance of union nut from mounting surface Complete with two fixing screws Valve Plate Size Thickness Code Price 20 16.0 14 0103 4.67 25 23.0 14 0102 4.67 32 23.0 14 0102 4.67 40 18.5 14 0123 7.59 50 23.5 14 0109 7.59 63 23.5 14 0109 7.59 Praher Replacement Diaphragm Praher diaphragm valve shown with mounting plate EPDM Diaphragm 20/ 1 /2 05.0457 18.26 25/ 3 /4 05.0457 18.26 32/1 05.0458 19.39 40/1 1 /4 05.0459 22.14 50/1 1 /2 05.0459 22.14 63/2 05.0460 23.01 75/2 1 /2 12.0933 47.77 90/3 12.0933 47.77 110/4 12.0934 108.29 5 12.0934 108.29 EPDM/PTFE Diaphragm 20/ 1 /2 05.0473 37.00 25/ 3 /4 05.0473 37.00 32/1 05.0474 41.51 40/1 1 /4 05.0475 51.52 50/1 1 /2 05.0475 51.52 63/2 05.0476 58.28 75/2 1 /2 12.0918 283.86 90/3 12.0918 283.86 110/4 12.0919 325.12 5 12.0919 325.12 FPM Diaphragm 20/ 1 /2 05.0465 85.67 25/ 3 /4 05.0465 85.67 32/1 05.0466 89.04 40/1 1 /4 05.0467 98.54 50/1 1 /2 05.0467 98.54 63/2 05.0468 208.83 75/2 1 /2 12.0935 240.01 90/3 12.0935 240.01 110/4 12.0936 401.94 5 12.0936 401.94 Durapipe VM Diaphragm Valve Description: In-line diaphragm valve withposition indicator Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0ºC - 60ºC Diaphragm: EPDM, FPM or PTFE End Connections: Solvent Spigots Inch Solvent Cement Spigots MM Solvent Cement Spigots EPDM Diaphragm 1 /2 H0 VME 202 53.16 3/4 H0 VME 203 62.81 1 H0 VME 204 78.13 1 1 /4 H0 VME 205 94.77 1 1 /2 H0 VME 206 126.27 2 H0 VME 207 155.25 2 1 /2 H0 VME 208 291.50 3 H0 VME 209 440.60 4 H0 VME 210 618.02 Inch Solvent Cement Spigots EPDM Diaphragm 20 H0 VME 406 53.09 25 H0 VME 407 62.74 32 H0 VME 408 78.15 40 H0 VME 409 94.81 50 H0 VME 410 138.40 63 H0 VME 411 155.23 75 H0 VME 412 291.51 90 H0 VME 413 440.59 110 H0 VME 414 618.05 MM Solvent Cement Spigots FPM Diaphragm 1 /2 H0 VMF 202 70.37 3 /4 H0 VMF 203 82.83 1 H0 VMF 204 99.01 1 1 /4 H0 VMF 205 121.28 1 1 /2 H0 VMF 206 159.09 2 H0 VMF 207 196.79 2 1 /2 H0 VMF 208 358.07 3 H0 VMF 209 523.10 4 H0 VMF 210 734.82 Inch Solvent Cement Spigots FPM Diaphragm 20 H0 VMF 406 70.37 25 H0 VMF 407 82.83 32 H0 VMF 408 99.01 40 H0 VMF 409 121.28 50 H0 VMF 410 159.42 63 H0 VMF 411 196.79 75 H0 VMF 412 358.07 90 H0 VMF 413 523.10 110 H0 VMF 414 734.82 MM Solvent Cement Spigots PTFE Diaphragm 1/2 H0 VMG 202 114.10 3 /4 H0 VMG 203 124.45 1 H0 VMG 204 144.91 1 1 /4 H0 VMG 205 190.57 1 1 /2 H0 VMG 206 238.22 2 H0 VMG 207 296.51 2 1 /2 H0 VMG 208 499.74 3 H0 VMG 209 684.64 4 H0 VMG 210 904.52 PTFE Diaphragm 20 H0 VMG 406 114.10 25 H0 VMG 407 124.45 32 H0 VMG 408 144.91 40 H0 VMG 409 190.57 50 H0 VMG 410 238.22 63 H0 VMG 411 296.51 75 H0 VMG 412 499.74 90 H0 VMG 413 684.64 110 H0 VMG 414 904.52 108

Praher Type T4 Diaphragm Valve Description: In-line diaphragm valve with position indicator Maximum Fluid Pressure at 20 C: 10 bar Diaphragm: EPDM, FPM or PTFE (EPDM backed) End Connections: Solvent Sockets, Solvent Spigots, Flanged BS4504 EN1072 PN10 Option: Silicon-free MM Solvent Cement Unions EPDM Diaphragm 1 /2 122 905 52.84 EPDM Diaphragm 20 122 212 50.24 3/4 122 906 57.38 25 122 213 54.53 1 122 907 71.67 32 122 214 68.16 1 1 /4 122 908 103.22 40 122 215 98.28 1 1 /2 122 909 112.56 50 122 216 107.10 2 122 910 138.91 63 122 217 132.42 MM Solvent Cement Unions PTFE Diaphragm 1 /2 122 926 109.31 PTFE Diaphragm 20 122 832 104.12 3 /4 122 927 114.50 25 122 833 109.06 1 122 928 131.11 32 122 834 124.76 1 1 /4 122 929 185.64 40 122 835 176.55 1 1 /2 122 930 201.87 50 122 836 192.13 2 122 931 255.11 63 122 837 242.76 MM Solvent Cement Unions FPM Diaphragm 1 /2 122 911 109.31 FPM Diaphragm 20 122 376 104.12 3/4 122 912 114.50 25 122 377 109.06 1 122 913 131.11 32 122 378 124.76 1 1 /4 122 914 185.64 40 122 379 176.55 1 1 /2 122 915 201.87 50 122 380 192.13 2 122 916 255.11 63 122 381 242.76 Flanged PN10 Flanged PN10 EPDM Diaphragm 1 /2 12 0189 57.00 PTFE Diaphragm 1 /2 12 0212 112.17 3 /4 12 0190 63.22 3 /4 12 0213 116.46 1 12 0191 76.85 1 12 0216 138.27 1 1 /4 12 0192 117.10 1 1 /4 12 0217 215.49 1 1 /2 12 0193 126.45 1 1 /2 12 0218 224.59 2 12 0194 156.44 2 12 0219 283.00 2 1 /2 12 0198 341.42 2 1 /2 12 0227 538.76 3 12 0200 405.69 3 12 0228 603.03 4 12 0898 581.56 4 12 0896 803.60 5 12 0899 726.99 5 12 0897 1035.97 Flanged PN10 FPM Diaphragm 1/2 12 0202 112.17 3/4 12 0203 116.46 1 12 0205 138.27 1 1 /4 12 0206 215.49 1 1 /2 12 0208 224.59 2 12 0209 283.00 2 1 /2 12 0210 538.76 3 12 0211 603.03 4 on application on application 5 on application on application 109

Spears Plug Gate Valve Description: In-line gate (plug) valve Maximum Fluid Pressure at 20 C: 16 bar Seats & Seals: EPDM, FPM or Buna-N End Connections: Solvent Sockets, Reinforced NPT Female Threaded, Flanged Features: Low profile, space saving design Plug-style wedge provides uniform sealing surface with positive shut-off Non-rising stem with patented strain-equalising threads 1 /2 5222-005 17.40 1 /2 5232-005 19.21 3 /4 5222-007 21.30 3 /4 5232-007 22.46 1 5222-010 25.33 1 5232-010 27.76 1 1 /4 5222-012 34.93 1 1 /4 5232-012 38.43 1 1 /2 5222-015 44.92 1 1 /2 5232-015 48.96 2 5222-020 57.25 2 5232-020 59.71 NPT Female Threaded Stainless Steel Reinforced NPT Female Threaded Stainless Steel Reinforced 1 /2 5221-005 SR 19.21 1 /2 5231-005SR 20.91 3 /4 5221-007 SR 23.89 3 /4 5231-007SR 25.06 1 5221-010 SR 28.81 1 5231-010SR 31.42 1 1 /4 5221-012 SR 40.64 1 1 /4 5231-012SR 44.14 1 1 /2 5221-015 SR 54.78 1 1 /2 5231-015SR 58.69 2 5221-020 SR 67.76 2 5231-020SR 73.47 Flanged ASA 150 Flanged ASA 150 1 /2 5223-005 86.85 1 /2 5233-005 99.58 3 /4 5223-007 97.50 3 /4 5233-007 111.26 1 5223-010 106.84 1 5233-010 122.82 1 1 /4 5223-012 122.29 1 1 /4 5233-012 145.40 1 1 /2 5223-015 142.16 1 1 /2 5233-015 166.82 2 5223-020 168.77 2 5233-020 180.46 ASV Stubbe Gauge Guard Description: Pressure gauge connector with isolating diaphragm Maximum Fluid Pressure at 20 C: 10 bar Diaphragm: PTFE (EPDM backed) NPT Female x NPT Female 1 /4x 1 /4 135539 41.85 1 /2x 1 /2 135542 41.85 Spigot/BSP Female x BSP Female 25x 1 /4x 1 /4 135533 41.85 32x 1 /2x 1 /2 135536 41.85 Please note: gauge not included. 110

Spears Diaphragm Valve Description: In-line diaphragm valve with position indicator Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar (PTFE diaphragm - 10 bar); sizes 2 1 /2 to 4-10 bar; size 6-6.5 bar; size 8-5 bar Flanged valves (where size permits) - 10 bar Seat: EPDM, FPM, PTFE (EPDM backed) or PTFE (FPM backed) End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Flanged Features: Sizes 1 /2 to 2 Solvent Socket valves also include NPT Female Threaded end connections EPDM Diaphragm 1/2 2729-005 66.46 3 /4 2729-007 75.43 1 2729-010 92.94 1 1 /4 2729-012 139.56 1 1 /2 2729-015 146.70 2 2729-020 173.31 FPM Diaphragm 1/2 2739-005 73.87 3 /4 2739-007 83.74 1 2739-010 102.04 1 1 /4 2739-012 165.53 1 1 /2 2739-015 169.42 2 2739-020 205.11 PTFE Diaphragm EPDM Backed 1 /2 2729T- 005 105.82 3 /4 2729T- 007 113.09 1 2729T- 010 163.57 1 1 /4 2729T- 012 224.59 1 1 /2 2729T- 015 239.52 2 2729T- 020 273.27 PTFE Diaphragm FPM Backed 1 /2 2739VT- 005 145.40 3 /4 2739VT- 007 157.08 1 2739VT- 010 199.93 1 1 /4 2739VT- 012 269.38 1 1 /2 2739VT- 015 279.12 2 2739VT- 020 349.88 Flanged ASA 150 Flanged ASA 150 EPDM Diaphragm 1 /2 2723-005 106.07 3/4 2723-007 119.18 1 2723-010 134.36 1 1 /4 2723-012 182.40 1 1 /2 2723-015 184.35 2 2723-020 219.40 2 1 /2 2723-025 367.39 3 2723-030 490.72 4 2723-040 680.26 6 2723-060 1730.51 8 2723-080 3300.04 FPM Diaphragm 1 /2 2733-005 114.77 3 /4 2733-007 122.16 1 2733-010 149.95 1 1 /4 2733-012 201.87 1 1 /2 2733-015 205.76 2 2733-020 234.33 2 1 /2 2733-025 419.97 3 2733-030 545.25 4 2733-040 741.27 6 2733-060 1922.64 8 2733-080 3461.00 Flanged ASA 150 Flanged ASA 150 PTFE Diaphragm EPDM Backed 1/2 2793T- 005 145.40 3 /4 2793T- 007 157.08 1 2793T- 010 199.93 1 1 /4 2793T- 012 269.38 1 1 /2 2793T- 015 279.12 2 2793T- 020 312.87 2 1 /2 2793T- 025 580.29 3 2793T- 030 760.74 4 2793T- 040 1054.14 6 2793T- 060 2728.83 8 2793T- 080 4049.10 PTFE Diaphragm FPM Backed 1 /2 2793VT- 005 159.04 3 /4 2793VT- 007 177.22 1 2793VT- 010 223.95 1 1 /4 2793VT- 012 297.29 1 1 /2 2793VT- 015 309.63 2 2793VT- 020 357.66 2 1 /2 2793VT- 025 664.69 3 2793VT- 030 841.23 4 2793VT- 040 1170.98 6 2793VT- 060 2997.55 8 2793VT- 080 4548.91 111

Spears Globe Valve Description: In-line globe throttling valve Maximum Fluid Pressure at 20 C: 10 bar Stem and Plug: PVC-U End Connections: Flanged ASA 150 Features: Fully serviceable, excellent flow regulating characteristics. Suitable for vacuum use. Flanged ASA 150 Flanged ASA 150 2 1 /2 6023-025 313.43 2 1 /2 6033-025 348.66 3 6023-030 313.43 3 6033-030 348.66 4 6023-040 406.77 4 6033-040 446.96 6 6023-060 626.84 6 6033-060 639.21 112

Spears Y-Pattern Valve Description: In-line Y-Pattern throttling valve Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-10 bar; sizes 2 1 /2 to 4-6 bar (grey or clear) Seat: EPDM or FPM End Connections: Solvent Sockets, Reinforced NPT Female Threaded, Flanged Features: Globe valve design provides proportional opening to seating disc travel for more accurate flow control Special semi-rigid seating disc eliminates vibration for more accurate flow control Y-Pattern reduces flow restriction over standard globe valve Grey Body EPDM 1 /2 1722-005 64.53 3 /4 1722-007 75.56 1 1722-010 90.49 1 1 /4 1722-012 110.22 1 1 /2 1722-015 148.00 2 1722-020 209.67 3 1722-030 451.13 4 1722-040 765.94 Grey Body FPM 1 /2 1732-005 68.16 3 /4 1732-007 80.63 1 1732-010 96.72 1 1 /4 1732-012 121.38 1 1 /2 1732-015 156.44 2 1732-020 223.29 3 1732-030 490.72 4 1732-040 833.45 Clear Body EPDM 1 /2 1722-005CL 80.63 3 /4 1722-007CL 94.51 1 1722-010CL 113.09 1 1 /4 1722-012CL 138.27 1 1 /2 1722-015CL 184.35 2 1722-020CL 262.23 3 1722-030CL 564.07 4 1722-040CL 956.78 Clear Body FPM 1 /2 1732-005CL 85.16 3 /4 1732-007CL 100.74 1 1732-010CL 120.86 1 1 /4 1732-012CL 151.89 1 1 /2 1732-015CL 195.38 2 1732-020CL 279.12 3 1732-030CL 613.41 4 1732-040CL 1042.46 NPT Female Threaded Stainless Steel Reinforced NPT Female Threaded Stainless Steel Reinforced Grey Body EPDM 1/2 1721-005 SR 66.98 3/4 1721-007 SR 79.33 1 1721-010 SR 95.42 1 1 /4 1721-012 SR 130.47 1 1 /2 1721-015 SR 160.33 2 1721-020 SR 225.89 3 1721-030 SR 484.23 4 1721-040 SR 800.99 Grey Body FPM 1/2 1731-005 SR 70.62 3/4 1731-007 SR 84.26 1 1731-010 SR 101.66 1 1 /4 1731-012 SR 137.60 1 1 /2 1731-015 SR 167.48 2 1731-020 SR 236.93 3 1731-030 SR 524.48 4 1731-040 SR 868.50 Flanged ASA 150 Flanged ASA 150 Grey Body EPDM 1 /2 1723-005 90.49 3 /4 1723-007 104.12 1 1723-010 122.69 1 1 /4 1723-012 144.09 1 1 /2 1723-015 181.11 2 1723-020 254.45 3 1723-030 495.91 4 1723-040 984.03 Grey Body FPM 1 /2 1733-005 94.12 3 /4 1733-007 109.06 1 1733-010 127.62 1 1 /4 1733-012 153.84 1 1 /2 1733-015 189.53 2 1733-020 266.78 3 1733-030 535.52 4 1733-040 1043.76 113

economy gate valves Valterra Slide Gate Valve Description: In-line manually operated slide gate valve Maximum Fluid Pressure at 20 C: 1 1 /2 /50mm - 3.4 bar; 2 /63mm - 2.5 bar; 3 /90mm - 2 bar; 4 /110mm -1.4 bar; 6 & 8-1 bar Fluid Temperature Range: 0 C-40 C Body: ABS or PVC-U Seals: Santopreme Paddle: Polypropylene or Stainless Steel End Connections: Solvent Socket, Solvent Spigot, NPT Threaded Inch or mm Solvent Cement Sockets Size Connections Colour Body Sockets Paddle Handle Code Price 1 1 /2 Socket x Socket Black ABS ABS Polypropylene Plastic I7101 13.11 1 1 /2 Socket x Socket White ABS PVC-U Polypropylene Plastic I6101 13.11 50mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8101 13.11 2 Socket x Socket Black ABS ABS Polypropylene Plastic I7201 19.40 2 Socket x Socket White ABS PVC-U Polypropylene Plastic I6201 19.04 2 Socket x Socket Black ABS ABS Stainless Steel Plastic I5201 28.72 63mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8201 19.04 3 Socket x Socket Black ABS ABS Polypropylene Plastic I7301 25.33 3 Socket x Socket White ABS PVC-U Polypropylene Plastic I6301 24.85 3 Socket x Socket Black ABS ABS Stainless Steel Plastic I5301 34.52 90mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8301 25.33 4 Socket x Socket Grey PVC-U PVC-U Stainless Steel Metal I6401 93.34 110mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8401 93.34 6 Socket x Socket White PVC-U PVC-U Stainless Steel Metal I6601 353.60 160mm Socket x Socket White PVC-U PVC-U Stainless Steel Metal I8601 353.60 8 Socket x Socket White PVC-U PVC-U Stainless Steel Metal I6801 483.43 Low Cost Flow Control The Valterra Slide Gate Valve is a simple pull to open, push to close valve designed for low pressure applications. In addition to the valve, a range of optional end connections and fittings is also available. Please enquire for details. Ball Float Valve Description: Liquid level control valve Mounting: In a horizontal position Maximum Fluid Pressure at 20 C: 10 bar Body: Polypropylene Arm: Polypropylene Float: Polypropylene End Connections: BSP male threaded 1 /2 03500102 24.91 1 03500104 99.64 1 1 /2 03500106 125.08 114

Spears Gate Valve Description: In-line gate valve with non rising stem Maximum Fluid Pressure at 20 C: Sizes up to 2-14 bar; 3-10 bar; 4-6 bar Gate: Polypropylene Bonnet: PVC-U except 4 which is Stainless Steel 316 End Connections: Solvent Sockets, BSP or NPT Threaded, Flanged. 1 /2 2022-005 18.18 1 /2 2032-005 19.21 3 /4 2022-007 21.30 3 /4 2032-007 22.46 1 2022-010 25.33 1 2032-010 27.79 1 1 /4 2022-012 34.93 1 1 /4 2032-012 38.43 1 1 /2 2022-015 44.92 1 1 /2 2032-015 48.96 2 2022-020 57.35 2 2032-020 62.83 3 2022-030 334.93 3 2032-030 368.04 4 2022-040 663.38 4 2032-040 729.59 BSP Threaded Sockets BSP Threaded Sockets 1 /2 2025-005 17.40 3/4 2025-007 21.30 1 2025-010 25.33 1 1 /4 2025-012 34.93 1 1 /2 2025-015 44.92 2 2025-020 57.25 1 /2 2035-005 19.21 3/4 2035-007 22.46 1 2035-010 27.79 1 1 /4 2035-012 38.43 1 1 /2 2035-015 48.96 2 2035-020 62.83 MM Solvent Cement Sockets MM Solvent Cement Sockets 20 2024-005 17.40 20 2034-005 19.21 25 2024-007 21.30 25 2034-007 22.46 32 2024-010 25.33 32 2034-010 27.79 40 2024-012 34.93 40 2034-012 38.43 50 2024-015 44.92 50 2034-015 48.96 63 2024-020 57.25 63 2034-020 62.83 Flanged ASA 150 Flanged ASA 150 1 /2 2023-005 86.85 1 /2 2033-005 99.58 3 /4 2023-007 97.50 3 /4 2033-007 111.26 1 2023-010 106.84 1 2033-010 122.82 1 1 /4 2023-012 122.29 1 1 /4 2033-012 145.40 1 1 /2 2023-015 142.16 1 1 /2 2033-015 166.82 2 2023-020 168.77 2 2033-020 180.46 2 1 /2 2023-025 508.90 2 1 /2 2033-025 559.53 3 2023-030 508.90 3 2033-030 559.53 4 2023-040 832.14 4 2033-040 915.24 Spears Needle Valve Description: Globe or Angle pattern flow control valve Maximum Fluid Pressure at 20 C: 16 bar Seal: PTFE End Connections: Female NPT Threaded Feature: Built-in panel or bracket mounting nut Globe Pattern Valve 1 /4 5591-002 52.20 3 /8 5591-003 52.20 Angle Pattern Valve 1 /4 5691-002 52.20 3/8 5691-003 52.20 115

Spears True Union 2000 Industrial Ball Check Valve Description: In-line ball check valve Mounting: Vertical Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All sizes flanged - 10 bar End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, Reinforced NPT Female Threaded, Flanged Features: Sizes 1 /2 to 2 Solvent Socket valves also include NPT Female Threaded end connections All valves are assembled with Silicon-free, water soluble lubricant 1 /2 4529-005 27.14 1 /2 4539-005 30.64 3 /4 4529-007 32.32 3 /4 4539-007 34.15 1 4529-010 38.43 1 4539-010 42.84 1 1 /4 4529-012 56.22 1 1 /4 4539-012 62.96 1 1 /2 4529-015 64.53 1 1 /2 4539-015 71.54 2 4529-020 88.02 2 4539-020 97.88 2 1 /2 4522-025 213.56 2 1 /2 4532-025 227.19 3 4522-030 213.56 3 4532-030 227.19 4 4522-040 400.50 4 4532-040 421.91 6 4522-060 1573.42 6 4532-060 1743.49 Inch Solvent Cement Spigots Inch Solvent Cement Spigots 1 /2 4527-005 27.14 1 /2 4537-005 30.64 3 /4 4527-007 32.32 3 /4 4537-007 34.15 1 4527-010 38.43 1 4537-010 42.84 1 1 /4 4527-012 56.22 1 1 /4 4537-012 62.96 1 1 /2 4527-015 64.53 1 1 /2 4537-015 71.54 2 4527-020 88.02 2 4537-020 97.88 2 1 /2 4527-025 213.56 2 1 /2 4537-025 227.19 3 4527-030 213.56 3 4537-030 227.19 4 4527-040 400.50 4 4537-040 421.91 6 4527-060 1573.42 6 4537-060 1743.49 1 /2 4523-005 38.31 1 /2 4533-005 48.04 3/4 4523-007 46.21 3/4 4533-007 57.51 1 4523-010 54.78 1 4533-010 66.98 1 1 /4 4523-012 67.76 1 1 /4 4533-012 87.50 1 1 /2 4523-015 93.47 1 1 /2 4533-015 101.52 2 4523-020 132.42 2 4533-020 135.02 2 1 /2 4523-025 273.27 2 1 /2 4533-025 318.06 3 4523-030 382.33 3 4533-030 444.64 4 4523-040 517.33 4 4533-040 600.43 6 4523-060 2476.97 6 4533-060 2874.23 Spears Foot Valve Screen Flanged ASA 150 Flanged ASA 150 Description: Foot valve screen for Spears ball check valve End Connections: Solvent Spigot Inch Solvent Cement Spigots 1 /2 FVS- 005 33.11 3 /4 FVS- 007 39.21 1 FVS- 010 47.77 1 1 /4 FVS- 012 69.45 1 1 /2 FVS- 015 73.22 2 FVS- 020 82.57 2 1 /2 FVS- 025 113.59 3 FVS- 030 116.83 4 FVS- 040 138.27 116

Praher Type S4 Check (Non-Return) Valve Description: In-line spring cone check valve Maximum Fluid Pressure at 20 C: Sizes up to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar; 4 /110mm - 6 bar Spring: Stainless Steel (optional PTFE sleeve) End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE Fusion Spigots 3 /8 12.1940 24.02 3 /8 12.2651 29.07 1/2 12.0278 25.33 1/2 12.2652 30.26 3/4 12.2076 30.26 3/4 12.2653 36.48 1 12.2072 35.83 1 12.2654 43.36 1 1 /4 12.2080 44.14 1 1 /4 12.2655 52.84 1 1 /2 12.1109 52.97 1 1 /2 12.2656 62.96 2 12.1110 71.80 2 12.2657 83.08 2 1 /2 12.1098 149.95 2 1 /2 12.1099 172.66 3 12.1900 185.00 3 12.2648 219.40 4 12.2805 246.01 4 12.4569 290.15 MM Solvent Cement Sockets MM Solvent Cement Sockets 16 12.1069 24.02 20 12.1088 25.33 25 12.1090 30.26 32 12.1092 35.83 40 12.1094 44.14 50 12.1041 52.97 63 12.1042 71.80 75 12.1098 149.95 90 12.1043 185.00 110 12.2291 246.01 16 12.1087 29.07 20 12.1089 30.26 25 12.1091 36.48 32 12.1093 43.36 40 12.1095 52.84 50 12.1096 62.96 63 12.1097 83.08 75 12.1099 172.66 90 12.1100 219.40 110 12.2388 290.15 MM Solvent Cement Spigots MM Solvent Cement Spigots 16 12.1204 24.02 16 12.1205 29.07 20 12.1208 25.33 20 12.1209 30.26 25 12.1210 30.26 25 12.1211 36.48 32 12.1212 35.83 32 12.1213 43.36 40 12.1214 44.14 40 12.1215 52.84 50 12.1216 52.97 50 12.1217 62.96 63 12.1206 71.80 63 12.1207 83.08 75 12.1218 149.29 75 12.1219 172.66 90 12.1220 185.00 90 12.1221 219.40 BSP Female Threaded BSP Female Threaded 3/8 12.1186 26.62 1 /2 12.1188 27.92 3 /4 12.1190 33.50 1 12.1192 39.46 1 1 /4 12.1194 48.55 1 1 /2 12.1196 58.69 2 12.1198 79.71 2 1 /2 12.1200 163.57 3 12.1202 206.42 3/8 12.1187 31.68 1 /2 12.1189 32.97 3 /4 12.1191 39.99 1 12.1193 47.26 1 1 /4 12.1195 57.64 1 1 /2 12.1197 69.07 2 12.1199 91.39 2 1 /2 12.1201 186.95 3 12.1203 240.82 Optional End Connections The S4 check valve is also available with the following end connections: PVC-U Flanges PVC-U Solvent Cement Spigots PE Fusion Spigots 117

Durapipe SR Single Union Ball Check Valve Description: In-line ball check valve Mounting: Vertical Maximum Fluid Pressure at 20 C: 16 bar Fluid Temperature Range: 0ºC - 60ºC End Connections: Male solvent spigot x female solvent union Options: FPM seals Inch Solvent Socket x Socket MM Solvent Spigot x Socket 1 /2 H0 SRE 102 42.45 3 /4 H0 SRE 103 48.64 1 H0 SRE 104 52.32 1 1 /4 H0 SRE 105 63.14 1 1 /2 H0 SRE 106 76.95 2 H0 SRE 107 110.43 20 H0 SRE 306 42.52 25 H0 SRE 307 48.57 32 H0 SRE 308 52.32 40 H0 SRE 309 63.14 50 H0 SRE 310 76.95 63 H0 SRE 311 110.43 Inch Solvent Socket x Socket MM Solvent Spigot x Socket 1 /2 H0 SRF 102 49.98 20 H0 SRF 306 49.98 3 /4 H0 SRF 103 53.63 25 H0 SRF 307 53.63 1 H0 SRF 104 61.82 32 H0 SRF 308 61.82 1 1 /4 H0 SRF 105 75.46 40 H0 SRF 309 75.46 1 1 /2 H0 SRF 106 97.79 50 H0 SRF 310 97.79 2 H0 SRF 107 149.42 63 H0 SRF 311 149.42 Durapipe VA Air Release Valve Description: In-line air release valve Mounting: In a vertical position Maximum Fluid Pressure at 20 C: 16 bar Fluid Temperature Range: 0ºC - 60ºC End Connections: Solvent Sockets or BSP Female Threaded MM Solvent Cement Sockets 1/2 H0 VAE 102 57.97 3/4 H0 VAE 103 66.98 1 H0 VAE 104 82.41 1 1 /4 H0 VAE 105 89.20 1 1 /2 H0 VAE 106 119.78 2 H0 VAE 107 162.10 20 H0 VAE 306 57.97 25 H0 VAE 307 66.98 32 H0 VAE 308 82.41 40 H0 VAE 309 89.20 50 H0 VAE 310 119.78 63 H0 VAE 311 162.10 MM Solvent Cement Sockets 1 /2 H0 VAF 102 59.80 20 H0 VAF 306 59.80 3 /4 H0 VAF 103 63.97 25 H0 VAF 307 63.97 1 H0 VAF 104 73.62 32 H0 VAF 308 73.62 1 1 /4 H0 VAF 105 100.61 40 H0 VAF 309 100.61 1 1 /2 H0 VAF 106 126.93 50 H0 VAF 310 126.93 2 H0 VAF 107 177.91 63 H0 VAF 311 177.91 118

Praher Type S4 Air Release Valve Description: In-line air release valve Mounting: In a vertical position Maximum Fluid Pressure at 20 C: Sizes up to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar; 4 /110mm - 6 bar Cone: PVC-U End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE Fusion Spigots 3 /8 12.0303 20.65 3 /8 12.0803 25.70 1 /2 12.2701 21.95 1 /2 12.0804 27.01 3 /4 12.2130 23.50 3 /4 12.0805 29.85 1 12.2131 26.74 1 12.0806 34.28 1 1 /4 12.2132 36.09 1 1 /4 12.0807 44.92 1 1 /2 12.2831 49.46 1 1 /2 12.0808 59.46 2 12.2011 68.81 2 12.0809 80.10 2 1 /2 12.1276 146.05 2 1 /2 12.1277 168.77 3 12.0099 179.15 3 12.0811 212.91 4 12.2999 239.52 4 12.0812 284.31 MM Solvent Cement Sockets MM Solvent Cement Sockets 16 12.1262 20.65 20 12.1264 21.95 25 12.1266 23.50 32 12.1268 26.74 40 12.1270 36.09 50 12.1272 49.46 63 12.1274 68.81 75 12.1276 146.05 90 12.1278 179.15 110 12.2391 239.52 16 12.1263 25.70 20 12.1265 27.01 25 12.1267 29.85 32 12.1269 34.28 40 12.1271 44.92 50 12.1273 59.46 63 12.1275 80.10 75 12.1277 168.77 90 12.1279 212.91 110 12.2392 284.31 MM Solvent Cement Spigots MM Solvent Cement Spigots 16 12.1459 20.65 16 12.1460 25.70 20 12.1461 21.95 20 12.1462 27.01 25 12.1463 23.50 25 12.1464 29.85 32 12.1465 26.74 32 12.1466 34.28 40 12.1467 36.09 40 12.1468 44.92 50 12.1469 49.46 50 12.1470 59.46 63 12.1471 68.81 63 12.1472 80.10 75 12.1473 146.05 75 12.1474 168.77 90 12.1475 179.15 90 12.1476 212.91 BSP Female Threaded BSP Female Threaded 3 /8 12.1280 23.24 1 /2 12.1282 24.41 3 /4 12.1284 26.62 1 12.1286 30.12 1 1 /4 12.1288 40.24 1 1 /2 12.1290 55.04 2 12.1292 76.59 2 1 /2 12.1294 159.68 3 12.1296 199.93 3 /8 12.1281 28.44 1 /2 12.1283 29.60 3 /4 12.1285 32.97 1 12.1287 37.91 1 1 /4 12.1289 49.33 1 1 /2 12.1291 65.31 2 12.1293 88.28 2 1 /2 12.1295 183.71 3 12.1297 234.98 119

Spears Swing Check Valve Description: In-line flanged swing (flap) check valve Maximum Fluid Pressure at 20 C: Sizes 3 /4 to 4-10 bar; size 6-6.9 bar; size 8-4.8 bar End Connections: Flanged ASA 150 Features: Quick response, low closing pressure. Serviceable in-line. Options: Arrow position indicator. Counter balanced flap. Flanged ASA 150 Flanged ASA 150 3 /4 4423-007 323.25 3 /4 4433-007 358.96 1 4423-010 372.59 1 4433-010 412.83 1 1 /2 4423-015 500.46 1 1 /2 4433-015 517.33 2 4423-020 616.65 2 4433-020 685.45 2 1 /2 4423-025 860.71 2 1 /2 4433-025 1015.20 3 4423-030 860.71 3 4433-030 1015.20 4 4423-040 1226.80 4 4433-040 1439.72 6 4423-060 2330.27 6 4433-060 2735.32 8 4423-080 4464.53 8 4433-080 5217.48 Praher Type S4 Check (Non-Return) Valve - PTFE Sleeved Spring Description: In-line spring weighted cone check valve with PTFE sleeved spring Maximum Fluid Pressure at 20 C: Sizes up to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar; 4 /110mm - 6 bar Spring: Stainless Steel (PTFE Sleeved) End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded MM Solvent Cement Sockets MM Solvent Cement Sockets 16 12.1764 26.48 20 12.1765 27.79 25 12.1766 33.37 32 12.1767 39.46 40 12.1768 48.55 50 12.1769 58.16 63 12.1770 78.94 75 12.1771 164.87 90 12.1772 203.82 110 12.2721 270.02 16 12.2116 31.94 20 12.2117 33.37 25 12.2118 40.24 32 12.2119 47.77 40 12.2120 58.16 50 12.2121 69.33 63 12.2122 91.53 75 12.2123 190.20 90 12.2124 241.47 110 12.2720 319.36 3 /8 12.1991 26.48 3 /8 12.2643 31.94 1 /2 12.2196 27.79 1 /2 12.2154 33.37 3 /4 12.2197 33.37 3 /4 12.2179 40.24 1 12.2198 39.46 1 12.2180 47.77 1 1 /4 12.2199 48.55 1 1 /4 12.2181 58.16 1 1 /2 12.2200 58.16 1 1 /2 12.2182 69.33 2 12.1114 78.94 2 12.2183 91.53 2 1 /2 12.1759 164.87 2 1 /2 12.2249 190.20 3 12.1782 203.82 3 12.2250 241.47 4 12.2981 270.02 4 12.2251 319.36 Other end connections on request. 120

Praher Type S4 Foot Valve Description: In-line foot valve with screen Mounting: In a vertical position Maximum Fluid Pressure at 20 C: Sizes up to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar; 4 /110mm - 6 bar Cone: PVC-U (weighted) End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE Spigots 3/8 12.2873 22.85 3 /8 12.2874 27.79 1 /2 12.2109 24.02 1/2 12.1032 29.07 3 /4 12.2110 27.79 3 /4 12.1033 34.01 1 12.2668 31.55 1 12.1034 39.09 1 1 /4 12.2129 40.38 1 1 /4 12.1035 49.20 1 1 /2 12.1353 51.02 1 1 /2 12.1036 61.20 2 12.1360 70.36 2 12.1037 81.66 2 1 /2 12.1367 148.00 2 1 /2 12.1368 170.73 3 12.2105 182.40 3 12.1039 216.16 4 12.2669 242.76 4 12.1040 266.26 MM Solvent Cement Sockets MM Solvent Cement Sockets 16 12.1323 22.85 20 12.1329 24.02 25 12.1335 27.79 32 12.1341 31.55 40 12.1347 40.38 50 12.1354 51.02 63 12.1361 70.36 75 12.1367 148.00 90 12.1373 182.40 110 12.2389 242.76 16 12.1324 27.79 20 12.1330 29.07 25 12.1336 34.01 32 12.1342 39.09 40 12.1348 49.20 50 12.1355 61.02 63 12.1362 81.66 75 12.1368 170.73 90 12.1374 216.16 110 12.2390 287.56 MM Solvent Cement Spigots MM Solvent Cement Spigots 16 12.1847 22.85 16 12.1848 27.79 20 12.1849 24.02 20 12.1850 29.07 25 12.1851 27.79 25 12.1852 34.01 32 12.1853 31.55 32 12.1854 39.09 40 12.1855 40.38 40 12.1857 49.20 50 12.1858 51.02 50 12.1859 61.02 63 12.1860 70.36 63 12.1861 81.66 75 12.1862 148.00 75 12.1863 170.73 90 12.1864 182.40 90 12.1865 216.16 BSP Female Threaded BSP Female Threaded 3 /8 12.1321 25.33 1 /2 12.1327 26.62 3 /4 12.1333 30.90 1 12.1339 35.06 1 1 /4 12.1345 44.66 1 1 /2 12.1351 56.60 2 12.1358 78.16 2 1 /2 12.1365 162.28 3 12.1371 203.18 3/8 12.1322 30.51 1 /2 12.1328 31.29 3 /4 12.1334 37.39 1 12.1340 42.84 1 1 /4 12.1346 53.75 1 1 /2 12.1352 66.98 2 12.1359 89.83 2 1 /2 12.1366 185.64 3 12.1372 238.23 121

Praher Type S4 Wafer Check Valve Description: Wafer style flap check valve, between flanges to BS4504 EN1072 PN10. Optional spring return for mounting in horizontal position or for pulsating flow Maximum Fluid Pressure at 20 C: Sizes 40mm to 160mm - 10 bar; Sizes 225mm to 315mm - 6 bar Spring: Stainless Steel End Connections: Flange mounted (flanges not included) No Spring Return No Spring Return 1 1 /4"/40 07.0001 65.05 1 1 /4"/40 07.0002 95.81 1 1 /2"/50 07.0196 71.40 1 1 /2"/50 07.0197 99.19 2"/63 07.0036 83.60 2"/63 07.0038 116.33 2 1 /2"/75 07.0046 89.32 2 1 /2"/75 07.0048 119.83 3"/90 07.0056 94.12 3"/90 07.0058 138.27 4"/110 07.0066 111.00 4"/110 07.0068 173.31 5"/140 07.0076 133.07 5"/140 07.0078 205.11 6"/160 07.0086 188.89 6"/160 07.0088 260.29 8"/225 07.0096 390.75 8"/225 07.0098 476.44 10"/280 07.0106 562.12 10"/280 07.0108 664.69 12"/315 07.0116 752.95 12"/315 07.0118 851.61 Stainless Steel Spring Return 1 1 /4"/40 07.0003 99.96 1 1 /4"/40 07.0004 164.24 1 1 /2"/50 07.0198 108.40 1 1 /2"/50 07.0199 168.12 2"/63 07.0037 118.91 2"/63 07.0039 177.22 2 1 /2"/75 07.0047 159.04 2 1 /2"/75 07.0049 190.84 3"/90 07.0057 170.06 3"/90 07.0059 216.16 4"/110 07.0067 197.33 4"/110 07.0069 256.40 5"/140 07.0077 224.59 5"/140 07.0079 299.24 6"/160 07.0087 269.38 6"/160 07.0089 362.20 8"/225 07.0097 501.77 8"/225 07.0099 533.55 10"/280 07.0107 715.31 10"/280 07.0109 791.90 12"/315 07.0117 943.80 12"/315 07.0119 1041.16 Dimensions (mm) D DN A B C 63 50 109 18 32 75 65 129 20 40 90 80 144 20 52 110 100 164 23 70 140 125 195 23 92 160 150 220 26 112 225 200 275 35 150 280 250 330 40 190 315 300 380 45 216 Stainless Steel Spring Return Installation Adaptor for Wafer Check Valve Size Code Price 2 /63 07.2202 77.38 2 1 /2 /75 07.2203 90.61 3 /90 07.2204 98.14 4 /110 07.2205 140.21 5 /140 07.2206 170.06 6 /160 07.2207 185.00 8 /225 07.2208 427.12 10 /280 07.2209 702.32 12 /315 07.2210 1265.75 Flange Mounting Allows the valve to open fully Will accommodate use with heavy wall pipes 122

Hidroten Wafer Check Valve Description: Wafer style flap check valve, between flanges to BS 4504 EN1072 PN10 Spring return version for mounting in horizontal position or for pulsating flow Maximum Fluid Pressure at 20 C: 16 bar Body: Polypropylene - Glass Fibre Reinforced Diaphragm: EPDM End Connections: Flange mounted (flanges not included) No Spring Return 90 13002 122.55 110 13003 136.97 125 13004 160.98 140 13005 190.20 160 13006 241.47 200 13007 321.95 Spring Return 90 13012 147.34 110 13013 164.24 125 13014 192.13 140 13015 227.84 160 13016 281.71 200 13017 368.04 Spring Return and Position Indicator 90 13022 174.61 110 13023 189.53 125 13024 218.74 140 13025 268.09 160 13026 321.95 200 13027 409.59 Praher Flange Mounted Wafer Check Valves Occasionally the flange mounted wafer check valve will have restricted opening if it is mounted in a heavy wall pipe. For all installations in heavy wall pipes we recommend the use of the additional installation adaptor to ensure that the valve will open fully. 123

Spears Utility Swing Check Valve Description: In-line swing (flap) check valve Mounting: Horizontal or vertical (up-flow) Maximum Fluid Pressure at 20 C: All sizes - 10 bar Body: White or Clear (transparent) PVC-U Seat: EPDM End Connections: Solvent Sockets, Solvent Cement Unions, NPT Female Threaded, Reinforced NPT Female Threaded Features: Angled seat and weighted flap for low pressure sealing New - Union ends White PVC-U EPDM Seat 1 /2 S1520-05 14.81 3 /4 S1520-07 14.81 1 S1520-10 15.45 1 1 /4 S1520-12 15.97 1 1 /2 S1520-15 16.87 2 S1520-20 26.22 2 1 /2 S1520-25 43.62 3 S1520-30 48.55 4 S1520-40 68.68 Clear PVC-U EPDM Seat 1 /2 S1520C- 05 19.47 3 /4 S1520C- 07 19.87 1 S1520C- 10 20.25 1 1 /4 S1520C- 12 21.17 1 1 /2 S1520C- 15 23.11 2 S1520C- 20 33.11 2 1 /2 S1520C- 25 55.18 3 S1520C- 30 61.41 4 S1520C- 40 82.57 White PVC-U EPDM Seat 1 /2 S1720-05 14.28 3 /4 S1720-07 14.68 1 S1720-10 17.53 1 1 /4 S1720-12 18.44 1 1 /2 S1720-15 20.25 2 S1720-20 30.38 2 1 /2 S1720-25 50.51 3 S1720-30 64.53 4 S1720-40 87.12 Clear PVC-U EPDM Seat 1 /2 S1720C- 05 16.87 3 /4 S1720C- 07 17.28 1 S1720C- 10 20.65 1 1 /4 S1720C- 12 21.69 1 1 /2 S1720C- 15 26.48 2 S1720C- 20 37.13 2 1 /2 S1720C- 25 60.89 3 S1720C- 30 70.10 4 S1720C- 40 93.47 NPT Female Threaded NPT Female Threaded White PVC-U EPDM Seat 1 /2 S1520-05F 14.81 3/4 S1520-07F 14.81 1 S1520-10F 15.45 1 1 /4 S1520-12F 15.97 1 1 /2 S1520-15F 16.87 2 S1520-20F 26.22 2 1 /2 S1520-25F 43.62 3 S1520-30F 48.55 4 S1520-40F 68.68 Clear PVC-U EPDM Seat 1 /2 S1520C- 05F 19.47 3/4 S1520C- 07F 19.87 1 S1520C- 10F 20.25 1 1 /4 S1520C- 12F 21.17 1 1 /2 S1520C- 15F 23.11 2 S1520C- 20F 33.11 2 1 /2 S1520C- 25F 55.18 3 S1520C- 30F 61.41 4 S1520C- 40F 82.57 NPT Female Threaded Stainless Steel Reinforced NPT Female Threaded Stainless Steel Reinforced White PVC-U EPDM Seat 1 /2 S1520-05F SR 17.14 3 /4 S1520-07F SR 17.14 1 S1520-10F SR 18.84 1 1 /4 S1520-12F SR 23.50 1 1 /2 S1520-15F SR 29.85 2 S1520-20F SR 40.24 2 1 /2 S1520-25F SR 48.29 3 S1520-30F SR 85.94 4 S1520-40F SR 107.49 Clear PVC-U EPDM Seat 1 /2 S1520C- 05F SR 21.81 3 /4 S1520C- 07F SR 23.24 1 S1520C- 10F SR 24.93 1 1 /4 S1520C- 12F SR 28.81 1 1 /2 S1520C- 15F SR 35.97 2 S1520C- 20F SR 47.13 2 1 /2 S1520C- 25F SR 76.99 3 S1520C- 30F SR 98.80 4 S1520C- 40F SR 121.38 124

Spears Utility Spring Check Valve Description: In-line spring assisted (flap) check valve Mounting: Horizontal or vertical (up-flow) Maximum Fluid Pressure at 20 C: All sizes - 10 bar Body: White or Clear (transparent) PVC-U Seat: EPDM End Connections: Solvent Sockets, Solvent Cement Unions, NPT Female Threaded, Reinforced NPT Female Threaded Features: Body design allows maximum flow. Quick response and positive shut-off. White PVC-U EPDM Seat 1 /2 S1580-05 28.19 3 /4 S1580-07 31.89 1 S1580-10 33.25 1 1 /4 S1580-12 34.61 1 1 /2 S1580-15 36.84 2 S1580-20 38.58 2 1 /2 S1580-25 68.49 3 S1580-30 71.46 4 S1580-40 101.38 Clear PVC-U EPDM Seat 1 /2 S1580C- 05 29.05 3 /4 S1580C- 07 32.89 1 S1580C- 10 34.26 1 1 /4 S1580C- 12 35.73 1 1 /2 S1580C- 15 37.83 2 S1580C- 20 39.19 2 1 /2 S1580C- 25 70.60 3 S1580C- 30 73.57 4 S1580C- 40 104.48 White PVC-U EPDM Seat 1 /2 S1780-05 37.45 3 /4 S1780-07 42.53 1 S1780-10 44.26 1 1 /4 S1780-12 46.12 1 1 /2 S1780-15 49.20 2 S1780-20 51.18 2 1 /2 S1780-25 91.37 3 S1780-30 95.20 4 S1780-40 135.39 Clear PVC-U EPDM Seat 1 /2 S1780C- 05 38.70 3 /4 S1780C- 07 43.89 1 S1780C- 10 45.62 1 1 /4 S1780C- 12 47.60 1 1 /2 S1780C- 15 50.44 2 S1780C- 20 51.93 2 1 /2 S1780C- 25 94.09 3 S1780C- 30 98.17 4 S1780C- 40 139.71 NPT Female Threaded NPT Female Threaded White PVC-U EPDM Seat 1 /2 S1580-05F 28.19 3/4 S1580-07F 31.89 1 S1580-10F 33.25 1 1 /4 S1580-12F 34.61 1 1 /2 S1580-15F 36.84 2 S1580-20F 38.58 2 1 /2 S1580-25F 68.49 3 S1580-30F 71.46 4 S1580-40F 101.38 Clear PVC-U EPDM Seat 1 /2 S1580C- 05F 29.05 3/4 S1580C- 07F 32.89 1 S1580C- 10F 34.26 1 1 /4 S1580C- 12F 35.73 1 1 /2 S1580C- 15F 37.83 2 S1580C- 20F 39.19 2 1 /2 S1580C- 25F 70.60 3 S1580C- 30F 73.57 4 S1580C- 40F 104.48 NPT Female Threaded Stainless Steel Reinforced NPT Female Threaded Stainless Steel Reinforced White PVC-U EPDM Seat 1 /2 S1580-05F SR 30.54 3 /4 S1580-07F SR 35.36 1 S1580-10F SR 37.96 1 1 /4 S1580-12F SR 42.16 1 1 /2 S1580-15F SR 49.82 2 S1580-20F SR 52.67 2 1 /2 S1580-25F SR 90.26 3 S1580-30F SR 109.06 4 S1580-40F SR 140.32 Clear PVC-U EPDM Seat 1 /2 S1580C- 05F SR 31.53 3 /4 S1580C- 07F SR 36.35 1 S1580C- 10F SR 38.94 1 1 /4 S1580C- 12F SR 43.28 1 1 /2 S1580C- 15F SR 50.81 2 S1580C- 20F SR 53.29 2 1 /2 S1580C- 25F SR 92.36 3 S1580C- 30F SR 111.15 4 S1580C- 40F SR 143.42 125

Praher Type S4 Line Strainer Description: In-line strainer with transparent body and union ends Maximum Fluid Pressure at 20 C: Sizes 3 /8 /16mm to 2 1 /2 /75mm - 16 bar; 3 /90mm - 10 bar Transparent Seals: EPDM Strainer: Polypropylene with 1.8mm mesh or Stainless Steel with 0.5mm, 0.75mm or 1mm mesh End Connections: Solvent Socket, BSP Female Thread, HDPE Fusion Spigots MM Solvent Cement Unions 1.8mm Screen 3 /8 12.0557 24.02 1/2 12.0558 25.33 3 /4 12.0559 30.26 1 12.0560 35.83 1 1 /4 12.0561 44.14 1 1 /2 12.0562 52.97 2 12.0563 71.80 2 1 /2 12.1708 149.95 3 12.0565 185.00 4 12.0350 246.01 1.8mm Screen 16 12.1701 24.02 20 12.1702 25.33 25 12.1703 30.26 32 12.1704 35.83 40 12.1705 44.14 50 12.1706 52.97 63 12.1707 71.80 75 12.1708 149.95 90 12.1709 185.00 110 12.1710 246.01 MM Solvent Cement Unions no screen included 3/8 12.4735 22.46 1 /2 12.4736 23.77 3 /4 12.4737 29.07 1 12.4738 34.79 1 1 /4 12.4739 42.84 1 1 /2 12.4740 51.93 2 12.4741 71.40 2 1 /2 12.4742 152.55 3 12.4743 186.95 4 12.0102 238.23 no screen included 16 12.4707 22.46 20 12.4708 23.77 25 12.4709 29.07 32 12.4710 34.79 40 12.4711 42.84 50 12.4712 51.93 63 12.4713 71.40 75 12.4714 152.55 90 12.4715 186.55 110 12.4716 238.23 Stainless Steel Screen* Stainless Steel Screen* 0.5mm mesh 16/ 3 /8 50606 10.45 20/ 1 /2 50606 10.45 25/ 3 /4 50608 13.12 32/1 50608 13.12 40/1 1 /4 50609 14.81 50/1 1 /2 50610 18.06 63/2 50611 20.91 75/2 1 /2 50612 31.68 90/3 50613 38.57 110/4 50613 38.57 1mm mesh 16/ 3 /8 50622 10.45 20/ 1 /2 50622 10.45 25/ 3 /4 50624 13.12 32/1 50624 13.12 40/1 1 /4 50625 14.81 50/1 1 /2 50626 18.06 63/2 50627 20.91 75/2 1 /2 50628 31.68 90/3 50629 38.57 110/4 50629 38.57 Stainless Steel Screen* 0.75mm mesh 16/ 3 /8 50614 10.45 20/ 1 /2 50614 10.45 25/ 3 /4 50616 13.12 32/1 50616 13.12 40/1 1 /4 50617 14.81 50/1 1 /2 50618 18.06 63/2 50619 20.91 75/2 1 /2 50620 31.68 90/3 50621 38.57 110/4 50621 38.57 * Note: A filter support is required for the stainless steel screen Filter Support for Stainless Steel Screen 16/ 3 /8 14.1474 21.79 20/ 1 /2 14.1474 21.79 25/ 3 /4 14.1475 22.84 32/1 14.1476 22.84 40/1 1 /4 14.1477 27.94 50/1 1 /2 14.1478 30.80 63/2 14.1479 33.36 75/2 1 /2 14.1480 42.97 90/3 14.1481 56.49 110/4 14.1481 56.49 126

Spears Y-Strainer Description: In-line strainer with transparent or grey body Maximum Fluid Pressure at 20 C: 10 bar transparent or grey Strainer: PVC 20 mesh End Connections: Solvent Socket Options: PVC or stainless steel strainer - 8, 12, 20 or 30 mesh PVC-U Grey Body PVC-U Grey Body PVC-U Screen 1 /2 YS22P_-005 30.51 3/4 YS22P_-007 36.22 1 YS22P_-010 45.84 1 1 /4 YS22P_-012 57.25 1 1 /2 YS22P_-015 76.33 2 YS22P_-020 95.42 3 YS22P_-030 299.24 4 YS22P_-040 523.17 PVC-U Screen 1 /2 YS32P_-005 36.22 3/4 YS32P_-007 40.50 1 YS32P_-010 51.93 1 1 /4 YS32P_-012 63.49 1 1 /2 YS32P_-015 91.53 2 YS32P_-020 114.37 3 YS32P_-030 321.95 4 YS32P_-040 563.43 PVC-U Transparent Body PVC-U Transparent Body PVC-U Screen 1/2 YS22P_-005CL 33.57 3 /4 YS22P_-007CL 39.85 1 YS22P_-010CL 50.41 1 1 /4 YS22P_-012CL 62.99 1 1 /2 YS22P_-015CL 83.96 2 YS22P_-020CL 104.97 3 YS22P_-030CL 314.20 4 YS22P_-040CL 549.33 Prices are for PVC 20 mesh only. Please enquire for alternative mesh strainers. PVC-U Screen 1 /2 YS32P_-005CL 39.85 3/4 YS32P_-007CL 44.56 1 YS32P_-010CL 57.12 1 1 /4 YS32P_-012CL 69.84 1 1 /2 YS32P_-015CL 100.68 2 YS32P_-020CL 125.81 3 YS32P_-030CL 338.05 4 YS32P_-040CL 591.60 Optional Mesh Codes For stainless steel mesh, replace the letter P with S. To specify the mesh size, add the following to the part number: Mesh size Hole size Part Number 8 2.39mm 8 12 1.57mm 12 20 0.84mm 20 30 0.61mm 30 e.g. YS22P8-005 Durapipe RV Y-Type Strainer Description: In-line sediment strainer Maximum Fluid Pressure at 20 C: 16 bar Fluid Temperature Range: 0ºC - 60ºC Strainer: Stainless Steel MM Solvent Cement Unions 1 /2 H0 UVE 102 34.11 3/4 H0 UVE 103 37.14 1 H0 UVE 104 50.26 1 1 /4 H0 UVE 105 60.79 1 1 /2 H0 UVE 106 83.79 2 H0 UVE 107 117.89 20 H0 UVE 306 34.11 25 H0 UVE 307 37.81 32 H0 UVE 308 49.18 40 H0 UVE 309 60.85 50 H0 UVE 310 81.73 63 H0 UVE 311 117.89 MM Solvent Cement Unions 1/2 H0 UVF 102 46.20 20 H0 UVF 306 46.20 3 /4 H0 UVF 103 51.47 25 H0 UVF 307 51.47 1 H0 UVF 104 67.00 32 H0 UVF 308 67.00 1 1 /4 H0 UVF 105 75.75 40 H0 UVF 309 75.75 1 1 /2 H0 UVF 106 121.18 50 H0 UVF 310 121.18 2 H0 UVF 107 158.79 63 H0 UVF 311 158.79 Also available in transparent PVC-U 127