INDEX PTO PARTS AND COMPONENTS

PTO PARTS AND COMPONENTS INDEX 0675 Series Parts - North American...8-42 FR Series - Cross Kit...8-45 Series Parts - Metric... 8-55, 8-56, 8-57 0 Series Parts - Metric... 8-8, 8-82 000 Series - Cross Reference...8-4 000 Series Parts - North American... 8-43, 8-44 2 Series Parts - North American...8-24, 8-25, 8-26 4 Series - Cross Kit...8-45 4 Series Parts - North American...8-27, 8-28, 8-29 800 Series - Cross Kit...8-45 2 Series Parts - Metric...8-58, 8-59, 8-60 200/00 Series Parts - Metric...8-83, 8-84 220/720 Series Parts - Metric...8-9, 8-92 2200/200 Series Parts - Metric...8-85, 8-86 2300/20 Series Parts - Metric...8-89, 8-90 2380 CV Parts - Metric...8-2, 8-22 2400 Series Parts - Metric...8-93, 8-94 2480 CV Drivelines - Metric...8-24 2480 CV Parts - Metric...8-23, 8-24 2500 Series Parts - Metric...8-95, 8-96 2580 CV Drivelines - Metric...8-26 2580 CV Parts - Metric...8-24, 8-25 2600 Series Parts - Metric...8-46, 8-95, 8-96 3 DR Series - Cross Kit...8-45 3 Series Parts - Metric...8-6, 8-62, 8-63 3/4 Series Parts - CV 80...8-, 8-2 35 Series - Cross Kit...8-45 35 Series Parts - North American... 8-30, 8-3, 8-32, 8-33 4 Series Parts - Metric...8-64, 8-65, 8-66 4/35 Series Drivelines - CV 80...8-4 4/35 Series Parts - CV 80...8-3 44 Series Parts - North American...8-34, 8-35, 8-36 5 Series Parts - Metric...8-67, 8-68, 8-69 5/35/44 Series Drivelines - CV 80...8-6 5/35/44 Series Parts - CV 80...8-5, 8-6 55 Series Parts - North American...8-37, 8-38, 8-39 6 Series Parts - Metric...8-70, 8-7, 8-72 6 Series Parts - North American..8-20, 8-2, 8-22, 8-23 6/55 Series Drivelines - CV 80...8-8 6/55 Series Parts - CV 80... 8-7, 8-8 7N Series Parts - Metric...8-73, 8-74, 8-75 8 Series Parts - Metric... 8-76, 8-77, 8-78 9 Series Parts - Metric...8-79, 8-80 AB Series Parts - Metric... 8-55, 8-56, 8-57 AB2 Series Parts - Metric...8-58, 8-59, 8-60 AB3 Series Parts - Metric...8-6, 8-62, 8-63 AB4 Series Parts - Metric...8-64, 8-65, 8-66 AB5 Series Parts - Metric...8-67, 8-68, 8-69 AB6 Series Parts - Metric... 8-70, 8-7, 8-72 AB7N Series Parts - Metric... 8-73, 8-74, 8-75 AB8N Series Parts - Metric... 8-76, 8-77, 8-78 AB9 Series Parts - Metric... 8-79, 8-80 Adaptors - PTO... 8-53, 8-54 Adaptors - Pump Drive... 8-63, 8-64 Adaptors - Weld On...8-62 Assembly - Cross Kit...8-7 Assembly - U-Joint...8-7 AW0 Series Parts - Metric... 8-83, 8-84 AW Series Parts - Metric... 8-87, 8-88 AW2 Series Parts - Metric... 8-99, 8-00 AW20 Series Parts - Metric... 8-85, 8-86 AW2 Series Parts - Metric... 8-89, 8-90 AW22 Series Parts - Metric... 8-9, 8-92 AW26 Series Parts - Metric... 8-97, 8-98 AW35 Series Parts - Metric... 8-93, 8-94 AW36 Series Parts - Metric... 8-95, 8-96 Baler Drivelines - CV 80... 8-08, 8-30 Bearing Kits - Easy Lock... 8-0, 8-, 8-2 Bearing Kits - Old Style...8-3 Bondioli - Cross Kit...8-52 Bondioli Tube - Dimensions...8-02 Clutch - Friction... 8-44, 8-46 Clutch - Overrunning...8-45 Clutch - Shearbolt...8-45

PTO PARTS AND COMPONENTS INDEX Clutch - Starter Kits...8-3 Clutch - Torquemaster...8-33 Clutch - Torquemaster Assy...8-35 Clutch - Torquemaster Features...8-34 Clutch Parts - Torquemaster..8-4, 8-42, 8-43, 8-44 Combine - Driveline...8-50 Complete - Universal Joints...8-50 Cones - Safety...8-08 Couplers - Overrunning...8-58 Couplers - Splined...8-60 Coupling - Spider...8-47 Cross & Bearing - E-Kits...8-6 Cross Kit - FR Series...8-45 Cross Kit - 4 Series...8-45 Cross Kit - 800 Series...8-45 Cross Kit - 3 DR Series...8-45 Cross Kit - 35 Series...8-45 Cross Kit - Assembly...8-7 Cross Kit - Bondioli...8-52 Cross Kit - Cross Over Chart...8-5 Cross Kit - Dimensions... 8-6, 8-52 Cross Kit - Grease...8-4 Cross Kit - Horsepower...8-6 Cross Kit - Quick Reference...8-6 Cross Kit - Replacement...8-7 Cross Kit - Vehicular...8-45 Cross Kit - Walterscheid...8-52 Cross Over Chart - Cross Kit...8-5 Cross Over Chart - Driveline...8-54 Cross Reference - 000 Series...8-4 CV 50 - Driveline Parts... 8-9, 8-20 CV 80-3/4 Series Parts... 8-, 8-2 CV 80-4/35 Series Drivelines...8-4 CV 80-4/35 Series Parts...8-3 CV 80-5/35/44 Series Drivelines...8-6 CV 80-5/35/44 Series Parts...8-5, 8-6 CV 80-6/55 Series Drivelines...8-8 CV 80-6/55 Series Parts...8-7, 8-8 CV 80 - Baler Drivelines...8-08, 8-30 CV 80 - Driveline Baler... 8-08 CV 80 - Information... 8-09 CV 80 Sizes - Driveline... 8-0 CV Joints - Wide Angle... 8-47 Decals - Safety... 8- Dimensions - Bondioli Tube... 8-02 Dimensions - Cross Kit...8-6, 8-52 Dimensions - Lemon Tube... 8-02 Dimensions - Spline... 8-5 Dimensions - Star Tube... 8-02 Dimensions - Triangle Tube... 8-02 Dimensions - Walterscheid Tube... 8-02 Disc - Flexible... 8-47 Display - E-Kits...8-6, 8-49 Display - Metric... 8-52 Display - North American...8-50, 8-5 Driveline - Combine... 8-50 Driveline - Cross Over Chart... 8-54 Driveline - CV 80 Sizes... 8-0 Driveline - Equivalent Chart... 8-54 Driveline - Flex Wing Cutters... 8-29 Driveline Baler - CV 80... 8-08 Driveline Parts - CV 50...8-9, 8-20 Easy Lock - Bearing Kits... 8-0, 8-, 8-2 Easy Lock - Guards...8-0, 8- Easy Lock - Safety... 8-2 E-Kits - Cross & Bearing... 8-6 E-Kits - Display...8-6, 8-49 E-Kits - Metric... 8-6 E-Kits - North American... 8-6 Equivalent Chart - Driveline... 8-54 Explanation Inch - Part Number... 8-8 Explanation Metric - Part Number... 8-54 Flex Wing Cutters - Driveline... 8-29 Flexible - Disc... 8-47

PTO PARTS AND COMPONENTS INDEX Friction - Clutch... 8-44, 8-46 Friction Clutch Parts - Metric...8-07 Gear Boxes - Hub City...8-65 German - Shafting...8-9 Grease - Cross Kit...8-4 Grease - Interval... 8-3, 8-4 Grease - Safety...8-3 Guards - Easy Lock... 8-0, 8- Guards - Metric...8- Guards - North American...8-0 Horsepower - Cross Kit...8-6 Hub City - Gear Boxes...8-65 Hub City - PTO... 8-55 to 8-64 I Series Parts - Metric... 8-87, 8-88 II Series Parts - Metric... 8-99, 8-00 Identification - Transparency Inch...8-9 Identification - Transparency Metric...8-53 Information - CV 80...8-09 Interchange - Metric...8-5 Interval - Grease... 8-3, 8-4 Italian - Shafting...8-9 Lemon Tube - Dimensions...8-02 Locking Device - Pins...8-53 Locking Device - Repair Kit... 8-7, 8-06 Manual - Safety...8- Metric - Series Parts... 8-55, 8-56, 8-57 Metric - 0 Series Parts... 8-8, 8-82 Metric - 2 Series Parts... 8-58, 8-59, 8-60 Metric - 200/00 Series Parts... 8-83, 8-84 Metric - 220/720 Series Parts... 8-9, 8-92 Metric - 2200/200 Series Parts... 8-85, 8-86 Metric - 2300/20 Series Parts... 8-89, 8-90 Metric - 2380 CV Parts... 8-2, 8-22 Metric - 2400 Series Parts... 8-93, 8-94 Metric - 2480 CV Drivelines...8-24 Metric - 2480 CV Parts... 8-23, 8-24 Metric - 2500 Series Parts... 8-95, 8-96 Metric - 2580 CV Drivelines...8-26 Metric - 2580 CV Parts... 8-24, 8-25 Metric - 2600 Series Parts...8-46 Metric - 2600 Series Parts... 8-97, 8-98 Metric - 3 Series Parts... 8-6, 8-62, 8-63 Metric - 4 Series Parts...64, 65, 66 Metric - 5 Series Parts... 8-67, 8-68, 8-69 Metric - 6 Series Parts... 8-70, 8-7, 8-72 Metric - 7N Series Parts... 8-73, 8-74, 8-75 Metric - 8 Series Parts... 8-76, 8-77, 8-78 Metric - 9 Series Parts... 8-79, 8-80 Metric - AB Series Parts... 8-55, 8-56, 8-57 Metric - AB2 Series Parts... 8-58, 8-59, 8-60 Metric - AB3 Series Parts... 8-6, 8-62, 8-63 Metric - AB4 Series Parts... 8-64, 8-65, 8-66 Metric - AB5 Series Parts... 8-67, 8-68, 8-69 Metric - AB6 Series Parts... 8-70, 8-7, 8-72 Metric - AB7N Series Parts... 8-73, 8-74, 8-75 Metric - AB8N Series Parts... 8-76, 8-77, 8-78 Metric - AB9 Series Parts... 8-79, 8-80 Metric - AW0 Series Parts... 8-83, 8-84 Metric - AW Series Parts... 8-87, 8-88 Metric - AW2 Series Parts... 8-99, 8-00 Metric - AW20 Series Parts... 8-85, 8-86 Metric - AW2 Series Parts... 8-89, 8-90 Metric - AW22 Series Parts... 8-9, 8-92 Metric - AW26 Series Parts... 8-97, 8-98 Metric - AW35 Series Parts... 8-93, 8-94 Metric - AW36 Series Parts... 8-95, 8-96 Metric - Display...8-52 Metric - E-Kits...8-6 Metric - Friction Clutch Parts...8-07 Metric - Guards...8- Metric - I Series Parts... 8-87, 8-88 Metric - II Series Parts... 8-99, 8-00 Metric - Interchange...8-5 Metric - Profile Shafting...8-9

PTO PARTS AND COMPONENTS INDEX Metric - Profile Tubing... 8-9 Metric - Replacement CV Driveline... 8-28 Metric - Replacement Driveline...8-03, 8-04 Metric Profile - Shafting and Tubing... 8-0 North American - 0675 Series Parts... 8-42 North American - 000 Series Parts...8-43, 8-44 North American - 2 Series Parts... 8-24, 8-25, 8-26 North American - 4 Series Parts... 8-27, 8-28, 8-29 North American - 35 Series Parts... 8-30, 8-3, 8-32, 8-33 North American - 44 Series Parts... 8-34, 8-35, 8-36 North American - 55 Series Parts... 8-37, 8-38, 8-39 North American - 6 Series Parts. 8-20, 8-2, 8-22, 8-23 North American - Display...8-50, 8-5 North American - E-Kits... 8-6 North American - Guards... 8-0 North American - Replacement CV Driveline... 8-27 North American - Shafting and Tubing... 8-47 North American - Shafts... 8-8 North American - Tubing... 8-8 North American - W Series Parts...8-40, 8-4 Nylon Bearings - Repair Kit... 8-48 Old Style - Bearing Kits... 8-3 Overrunning - Clutch... 8-45 Overrunning - Couplers... 8-58 Part Number - Explanation Inch... 8-8 Part Number - Explanation Metric... 8-54 Pins - Locking Device... 8-53 Pins - Spiral... 8-08 Profile Shafting - Metric... 8-9 Profile Tubing - Metric... 8-9 PTO - Adaptors...8-53, 8-54 PTO - Hub City...8-55 to 8-64 PTO - Sleeves... 8-55 Pump Drive - Adaptors...8-63, 8-64 QD Metric - Repair Kit... 8-06 Quick Disconnect - Repair Kit... 8-7 Quick Reference - Cross Kit... 8-6 Repair Kit - Locking Device... 8-7, 8-06 Repair Kit - Nylon Bearings...8-48 Repair Kit - QD Metric...8-06 Repair Kit - Quick Disconnect...8-7 Replacement - Cross Kit...8-7 Replacement - U-Joint...8-7 Replacement CV Driveline - Metric...8-28 Replacement CV Driveline - North American...8-27 Replacement Drivelines - Metric... 8-03, 8-04 Safety - Cones...8-08 Safety - Decals...8- Safety - Easy Lock...8-2 Safety - Grease...8-3 Safety - Manual...8- Safety - Section...8- Section - Safety...8- Selection Guide - Torquemaster... 8-36, 8-37 Shafting - German...8-9 Shafting - Italian...8-9 Shafting and Tubing - Metric Profile...8-0 Shafting and Tubing - North American...8-47 Shafts - North American...8-8 Shafts - Splined...8-6 Shearbolt - Clutch...8-45 Sleeves - PTO...8-55 Spider - Coupling...8-47 Spiral - Pins...8-08 Spline - Dimensions...8-5 Splined - Couplers...8-60 Splined - Shafts...8-6 Star Tube - Dimensions...8-02 Starter Kits - Clutch...8-3 Torquemaster - Clutch...8-33 Torquemaster - Clutch Parts... 8-38 to 8-44 Torquemaster - Selection Guide... 8-36, 8-37 Torquemaster Assy - Clutch...8-35 Torquemaster Features - Clutch...8-34

PTO PARTS AND COMPONENTS INDEX Transparency Inch - Identification...8-9 Transparency Metric - Identification...8-53 Triangle Tube - Dimensions...8-02 Tubing - North American...8-8 U-Joint - Assembly...8-7 U-Joint - Replacement...8-7 Universal Joints - Complete...8-50 Vehicular - Cross Kit...8-45 W Series Parts - North American... 8-40, 8-4 Walterscheid - Cross Kit...8-52 Walterscheid Tube - Dimensions...8-02 Weld On - Adaptors...8-62 Wide Angle - CV Joints...8-47

PTO PARTS AND COMPONENTS DRIVELINE SAFETY THE SAFETY OF THE END USER DEPENDS UPON PROPER USE AND MAINTENANCE OF THE IMPLEMENT TRACTOR, AND DRIVELINE, PLUS ALL RELATED SAFETY SHIELDING. INFORMATION REGARDING CORRECT DRIVELINE USAGE IS INCLUDED ON THE SAFETY LABEL. Use the implement only with a driveline which is compatible in length, power capacity, torque limiters or overrunning clutches, and shielding. The driveline and its torque limiter or overrunning clutch should only be used for their intended purposes. Ensure that all driveline, tractor and implement shields are functional and in place before operation. Damages or missing components must be replaced with spare parts, correctly installed, before using the driveline. Ensure that the driveline is securely attached to the tractor and the implement before operating. Disengage the PTO, turn off the tractor engine and remove key before approaching the implement or performing maintenance work. When used at night or in poor visibility, illuminate the driveline operating area during installation. Keep the driveline horizontal during handling to prevent the halves from sliding apart, which could cause injury or damage the shielding. Do not wear loose clothing, jewelry, hair, or anything which could get caught in the machine. Contact with rotating parts could cause serious injury or death. Always hitch the tractor to STA- TIONARY MACHINERY (pumps, elevators, generators, driers, etc.) so that the telescoping tubes overlap by at least /3 of their length.

PTO PARTS AND COMPONENTS WORKING CONDITIONS When operating, ensure that joining angles are equal. Disengage the PTO when the angle of the joints exceeds 35. Do not stand on the driveline. Do not step over, or go under the driveline. Contact with a rotating driveline could cause serious injury or death. CONSTANT VELOCITY JOINTS may operate at angles up to 70-80 depending upon type, but only for brief periods (for example during turns) and never continuously. Installing the Driveline: Clean and grease the tractor PTO and implement shaft before installing the driveline. Attach the safety chains, allowing sufficient slack for the driveline during turns, operation, and transport. The tractor printed on the shield indicated the tractor end of the driveline. Any torque limiter or overrunning clutch must be installed on the implement end. Never use the safety chains to support the driveline for storage. Always use the support on the implement.

PTO PARTS AND COMPONENTS 8- SAFETY SECTION WARNING! Be certain to disengage PTO shaft and to turn off the tractor before making any operational maintenance inspections or repairs. Keep clear of the machine until all parts have stopped moving. NEVER operate an implement with driveline guards missing or in a damaged condition. Guards must rotate freely on the yokes. SAFETY DECALS IMPORTANT CHECK THAT GUARD MISSING DECAL ON STEEL TUBE UNDER INNER GUARD AND ROTATING DRIVELINE DECAL ON OUTER GUARD ARE FIRMLY AFFIXED, UNDAMAGED AND READABLE - IF NOT, REPLACE. GUARDS MUST ROTATE FREELY ON YOKES. FOR USE ON IMPLEMENT END ONLY PTO 30022 PTO 3002 ALL CLUTCHES MUST BE USED ON THE IMPLEMENT END ONLY. Yellow decal is provided on clutch. SAFETY MANUAL The Agriculture Driveline Manufacturers Association (ADMA) has printed a Safety Manual for owners and operators of agricultural machinery. PTO 56523

8-2 PTO PARTS AND COMPONENTS EASY LOCK GUARD SYSTEM SAFETY SECTION Instructions for Removal and Installation of Easy Lock Guards Clean and grease bearing raceway before the nylon bearing is placed in the groove. Grease any remaining nylon bearings in guard. Slide guard half over driveline and insert nylon bearing tabs into the openings in the guard. 5 Turn the nylon bearing until it engages into the guard. Push Easy Lock clip into position. The nylon bearing and guard are now secure. Guards must rotate freely on yokes. To Remove Guard - Use screwdriver to release Easy Lock clip. Turn the nylon bearings to disengage from the guard and remove guard.

PTO PARTS AND COMPONENTS 8-3 GREASING RECOMMENDATIONS SAFETY SECTION Telescoping Drivelines Be certain to follow greasing instructions as identified below: Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearing (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs. hardened spline) 8-0 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max.) 2 Lever action pumps Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. 80 Constant Velocity Drivelines CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED. Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearings (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs hardened spline) 8-0 Lever action pumps 8 HRS* CV ball & socket 4-6 Lever action pumps 24 HRS CV center housing 2-5 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max.) 2 Lever action pumps** Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED.

8-4 PTO PARTS AND COMPONENTS GREASING RECOMMENDATIONS SAFETY SECTION 50 Constant Velocity Drivelines Lubricate all fittings with a good quality lithium soap compatible E.P. grease meeting the N.L.G.I. #2 specifications and containing no more than % molybdenum disulfide. An E.P. grease meeting the N.L.G.I. #2 specifications and containing 3% molybdenum disulfide may be substituted in the telescoping members only. LUBE RECOMMENDATIONS INTERVAL LOCATION AMOUNT 50 HRS Extended lube cross & bearings (orange seals not visible) 2-3 Lever action pumps 8 HRS* Standard cross & bearings (black seals) 2-3 Lever action pumps 8 HRS Telescoping members (50 hrs hardened spline) 8-0 Lever action pumps 8 HRS* CV ball & socket 4-6 Lever action pumps 50 HRS** CE & non-rotating guard bushings (000 RPM max) 2 Lever action pumps** Constant angle applications may require a lube interval of 4 hours. High speed may require a lube interval of 8 hours. CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED. REPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY AND DURING USE PER THE LUBE RECOMMENDATIONS. Greasing Recommendations for Cross & Bearing Kits Standard Cross & Bearing Kits (R-Kits) = 8 Hours. Extended Lubrication Cross & Bearing Kits (E-Kits) = 50-250 Hours.

PTO PARTS AND COMPONENTS 8-5 CROSS REFERENCE CHART QUICK REFERENCE SECTION North American Components CROSS & BRG KIT WEASLER AFTMKT. U-JOINT SERIES WEASLER U-JOINT SERIES APC/WESCO U-JOINT SERIES CHAINBELT U-JOINT SERIES G&G U-JOINT SERIES NEAPCO U-JOINT SERIES ROCKWELL U-JOINT SERIES PTO 200000 - - - - - - FR - PTO 2000300 - - - - - - 3DR - PTO 2000600 6 L6W/6RW 6N 6R SPICER U-JOINT SERIES - 6N L600 L6N - PTO 2000675 - - - - - 0675 - - PTO 2000700 - W - - - - - - PTO 200000 - - - - - - - 000 PTO 200200 2 PTO 200400 4 2RW 2R 4R/GN 4NW 2N R2N R3N/20 2N 200 L2N 40 4N R4N/40 4N 2000 L4N 240 PTO 200875 - - - - - 800 - - PTO 2002600 - - - - - 2600-480 PTO 2003500 35 35RW/35R DN/35NW 35N R35N/350 35N 2200 35N 340 PTO 2004400 44 44R 44N 440 4R 44R 44R 440 PTO 2005500 55 Metric Components L55/55NW 55R - - 55N - 55N - CROSS & BEARING R-KIT CROSS & BEARING E-KIT INTERCHANGES WITH BONDIOLI & PAVESI SERIES INTERCHANGES WITH WALTERSCHEID SERIES PTO 200654 PTO 20654 N/A PTO 2006580 PTO 206580 5 N/A PTO 2006794 PTO 206794 7N N/A PTO 2006806 PTO 206806 8 N/A PTO 2006908 PTO 206908 9 N/A PTO 2007004 PTO 207004 N/A 2600 PTO 200755 PTO 20755 N/A 200 PTO 2007676 PTO 207676 N/A 2400 PTO 2007890 N/A II N/A PTO 2007989 PTO 207989 N/A 2500 PTO 200826 PTO 20826 2 2200 PTO 2008370 PTO 208370 3 I PTO 2008474 PTO 208474 4 2300 PTO 2008692 PTO 208692 6 220 PTO 2008706 PTO 208706 7 (Old Series) 230 PTO 2007276 PTO 207276 N/A 2280 PTO 200749 PTO 20749 N/A 2380 PTO 2007694 PTO 207694 N/A 2480 PTO 2007906 PTO 207906 N/A 2580

8-6 PTO PARTS AND COMPONENTS QUICK REFERENCE FOR CROSS & BEARING KITS A North American (R) Snap Ring located in the bushing (internal) (E) SERIES B (R) KIT RATED H/P @ 540 RPM Snap Ring located in the yoke (external) (E) KIT RATED H/P @ 540 RPM (R) KIT RATED H/P @ 000 RPM R= E= (E) KIT RATED H/P @ 000 RPM BEARING DIAMETER QUICK REFERENCE SECTION Regular Cross & Bearing Kit Extended Lube Cross & Bearing Kit CAP TO CAP OVERALL PTO 200000 N/A Rockwell FR N/A N/A N/A N/A 7 /8" 2 5 /6" B 56 PTO 2000300 N/A Rockwell 3DR N/A N/A N/A N/A " 3 5 /6" B 56 PTO 2000600 PTO 200600 6 4 9 2 29 3 /32" 2 5 /6" A 22 PTO 2000675 N/A 0675 6 N/A 24 N/A 5 /6" 2 5 /6" A 52 PTO 2000700 N/A W N/A N/A N/A N/A 9 /6" /2" Pin & Block 50 PTO 200000 N/A 000 5 N/A 24 N/A 5 /6" 2 9 /32" A 53 PTO 200200 PTO 20200 2 9 26 29 40 /6" 2 /2" A 27 PTO 200400 PTO 20400 4 28 38 44 58 /8" 2 5 /8" B 32 PTO 200875 N/A 800 30 N/A 48 N/A " 3 7 /6" A 56 PTO 2002600 N/A 2600 00 N/A 44 N/A 3 /8" 4 3 /6" B 57 PTO 2003500 PTO 203500 35 5 70 79 08 /4" 3 7 /32" B 36 PTO 2004400 PTO 204400 44 77 03 9 58 5 /6" 4" A 42 PTO 2005500 PTO 205500 55 06 37 64 2 7 /32" 4 5 /6" B 47 SNAP RING TYPE PG. NO. Italian Series (R) (E) SERIES (R) KIT RATED H/P @ 540 RPM (E) KIT RATED H/P @ 540 RPM (R) KIT RATED H/P @ 000 RPM (E) KIT RATED H/P @ 000 RPM BEARING DIAMETER CAP TO CAP OVERALL PTO 200654 PTO 20654 5 9 23 29 22.0 mm 54.0 mm B 66 PTO 200826 PTO 20826 2 2 25 33 38 23.8 mm 6.2 mm B 69 PTO 2008370 PTO 208370 3 29 38 44 58 27.0 mm 70.0 mm B 72 PTO 2008474 PTO 208474 4 36 45 56 70 27.0 mm 74.6 mm B 75 PTO 2006580 PTO 206580 5 52 65 8 00 30.2 mm 79.6 mm B 78 PTO 2008692 PTO 208692 6 64 79 99 22 30.2 mm 92.0 mm B 82 PTO 2006794 PTO 206794 7N 79 94 22 45 34.9 mm 94.0 mm B 84 PTO 2006806 PTO 206806 8 00 20 54 85 34.9 mm 06.5 mm B 87 PTO 2006908 PTO 206908 9 20 5 85 232 4.0 mm 08.0 mm B 90 SNAP RING TYPE PG. NO. German Series (R) (E) SERIES (R) KIT RATED H/P @ 540 RPM (E) KIT RATED H/P @ 540 RPM (R) KIT RATED H/P @ 000 RPM (E) KIT RATED H/P @ 000 RPM BEARING DIAMETER CAP TO CAP OVERALL PTO 200755 PTO 20755 200 6 9 23 29 22.0 mm 54.8 mm B 93 PTO 200826 PTO 20826 2200 26 25 33 38 23.8 mm 6.2 mm B 95 PTO 2008370 PTO 208370 I 30 38 44 58 27.0 mm 70.0 mm B 97 PTO 2008474 PTO 208474 2300 37 45 56 70 27.0 mm 74.6 mm B 99 PTO 2008692 PTO 208692 220 64 79 99 22 30.2 mm 92.0 mm B 02 PTO 2007676 PTO 207676 2400 53 66 80 02 32.0 mm 76.0 mm B 04 PTO 2007989 PTO 207989 2500 90 94 24 44 36.0 mm 88.8 mm B 07 PTO 2007004 PTO 207004 2600 08 49 75 230 42.0 mm 04.0 mm B 0 SNAP RING TYPE PG. NO.

PTO PARTS AND COMPONENTS 8-7 UNIVERSAL JOINT REPLACEMENT QUICK REFERENCE SECTION To Disassemble Universal Joint. Remove all snap rings. To Reassemble Universal Joint

8-8 PTO PARTS AND COMPONENTS NORTH AMERICAN SHAFTING AND TUBING QUICK REFERENCE SECTION North American Shaft North American Tube SIZE PTO 400002 3 /4" Sq. 6' PTO 400004 7 /8" Sq. 6' PTO 400005 5 /6" Sq. 6' PTO 400006 " Sq. 6' PTO 400009 3 /6" Sq. 6' PTO 4000020 /4" Sq. 6' PTO 400002 5 /6" Sq. 6' PTO 40024 3 /4" x 7 /8" Rect. 6' PTO 40068 " x /8" Rect. 6' PTO 40009 3 /6" Sq. 0' PTO 40002 5 /6" Sq. 0' PTO 4024 3 /4" x 7 /8" Rect. 0' PTO 4068 " x /8" Rect. 0' PTO 402004 7 /8" Hex 6' PTO 402006 " Hex 6' PTO 402008 /8" Hex 6' PTO 404009 3 /6" Sq. 3' PTO 4020020 ¼" Hex 6' PTO 404002 5 /6" Sq. 3' PTO 40424 3 /4" x 7 /8" Rect. 3' PTO 40465H " x 5 Spl. 3' PTO 40468 " x /8" Rect. 3' PTO 404220 5 /6" x 20 Spl. 3' PTO 4042720 /6" x 20 Spl. 3' SIZE PTO 600002 " Sq. 6' PTO 600005 /4" Sq. (.20 wall) 6' PTO 600006 /4" Sq. (.09 wall) 6' PTO 6000020 5 /8" Sq. 6' PTO 60068 3 /4" x 7 /8" Rect. 6' PTO 6002022 /4" x 3 /8" Rect. 6' PTO 6068 3 /4" x 7 /8" Rect. 0' PTO 602022 /4" x 3 /8" Rect. 0' PTO 6020600 /2" Rd. 6' PTO 602400 2" Rd. (.083 wall) 6' PTO 6022600 2 3 /4" Rd. (.09 wall) 6' PTO 6023500 2 /8" Rd. (.20 wall) 6' PTO 602350 2 /8" Rd. (.083 wall) 6' PTO 6024400 2 /2" Rd. (.20 wall) 6' PTO 603400 2" Rd. (.083 wall) 0' PTO 6033500 2 /8" Rd. (.20 wall) 0' PTO 6034400 2 /2" Rd. (.20 wall) 0' PTO 6040600 /2" Rd. 3' PTO 60468 3 /4" x 7 /8" Rect. 3' PTO 6042022 /4" x 3 /8" Rect. 3' PTO 6043500 2 /8" Rd. (.20 wall) 3' PTO 6044400 2 /2" Rd. (.20 wall) 3'

PTO PARTS AND COMPONENTS 8-9 METRIC PROFILE SHAFTING AND TUBING QUICK REFERENCE SECTION SERIES METERS INCHES USE AS ByPy PTO 400626.5 59 /6" Inner ByPy PTO 40626 3.0 8 5 /6" Inner ByPy PTO 404626.0 39 3 /8" Inner ByPy PTO 600633.5 59 /6" Outer ByPy PTO 60633 3.0 8 5 /6" Outer ByPy PTO 604633.0 39 3 /8" Outer ByPy 2 PTO 4006229.5 59 /6" Inner ByPy 2 PTO 406229 3.0 8 5 /6" Inner ByPy 2 PTO 4046229.0 39 3 /8" Inner ByPy 2 PTO 6006236.5 59 /6" Outer ByPy 2 PTO 606236 3.0 8 5 /6" Outer ByPy 2 PTO 6046236.0 39 3 /8" Outer ByPy 3 PTO 6006236.5 59 /6" Inner ByPy 3 PTO 606236 3.0 8 5 /6" Inner ByPy 3 PTO 6046236.0 39 3 /8" Inner ByPy 3 & 4 PTO 6006343.5 59 /6" Outer ByPy 3 & 4 PTO 606343 3.0 8 5 /6" Outer ByPy 3 & 4 PTO 6046343.0 39 3 /8" Outer ByPy 4 PTO 4006436.5 59 /6" Inner ByPy 4 PTO 406436 3.0 8 5 /6" Inner ByPy 4 PTO 4046436.0 39 3 /8" Inner ByPy 5 & 6 PTO 4006545.5 59 /6" Inner ByPy 5 & 6 PTO 406545 3.0 8 5 /6" Inner ByPy 5 & 6 PTO 4046545.0 39 3 /8" Inner ByPy 5 PTO 6006552.5 59 /6" Outer ByPy 5 PTO 606552 3.0 8 5 /6" Outer ByPy 5 PTO 6046552.0 39 3 /8" Outer ByPy 6, 7N & 8 PTO 6006654.5 59 /6" Outer ByPy 6, 7N & 8 PTO 606654 3.0 8 5 /6" Outer ByPy 6, 7N & 8 PTO 6046654.0 39 3 /8" Outer ByPy 7N PTO 4006745.5 59 /6" Inner ByPy 7N PTO 406745 3.0 8 5 /6" Inner ByPy 7N PTO 4046745.0 39 3 /8" Inner ByPy 9 PTO 4006954.5 59 /6" Inner ByPy 9 PTO 406954 3.0 8 5 /6" Inner ByPy 9 PTO 4046954.0 39 3 /8" Inner ByPy 8 & 9 PTO 6006863.5 59 /6" Outer ByPy 8 & 9 PTO 606863 3.0 8 5 /6" Outer ByPy 8 & 9 PTO 6046863.0 39 3 /8" Outer W/S 200 PTO 400723.5 59 /6" Inner W/S 200 PTO 40723 3.0 8 5 /6" Inner W/S 200 PTO 404723.0 39 3 /8" Inner W/S 200 PTO 600730.5 59 /6" Outer W/S 200 PTO 60730 3.0 8 5 /6" Outer W/S 200 PTO 604730.0 39 3 /8" Outer W/S I & 2200 PTO 4007234.5 59 /6" Inner W/S I & 2200 PTO 407234 3.0 8 5 /6" Inner W/S I & 2200 PTO 4047234.0 39 3 /8" Inner W/S I & 2200 PTO 600724.5 59 /6" Outer SERIES METERS INCHES USE AS W/S I & 2200 PTO 60724 3.0 8 5 /6" Outer W/S I & 2200 PTO 604724.0 39 3 /8" Outer W/S 2400 (lemon) PTO 4007539.5 59 /6" Inner W/S 2400 (lemon) PTO 407539 3.0 8 5 /6" Inner W/S 2400 (lemon) PTO 4047539.0 39 3 /8" Inner W/S 2400 (lemon) PTO 6007548.5 59 /6" Outer W/S 2400 (lemon) PTO 607548 3.0 8 5 /6" Outer W/S 2400 (lemon) PTO 6047548.0 39 3 /8" Outer W/S 2400 & 2500 (star) PTO 400765.5 59 /6" Inner W/S 2400 & 2500 (star) PTO 40765 3.0 8 5 /6" Inner W/S 2400 & 2500 (star) PTO 404765.0 39 3 /8" Inner AW36 (star) PTO 600796.5 59 /6" Outer AW36 (star) PTO 60796 3.0 8 5 /6" Outer AW36 (star) PTO 604796.0 39 3 /8" Outer AW26 (star) PTO 400796.5 59 /6" Inner AW26 (star) PTO 40796 3.0 8 5 /6" Inner AW26 (star) PTO 404796.0 39 3 /8" Inner AW26 (star) PTO 600707.5 59 /6" Outer AW26 (star) PTO 60707 3.0 8 5 /6" Outer AW26 (star) PTO 604707.0 39 3 /8" Outer German-Style Shafting & Tubing Lemon & Star Profile Italian-Style Shafting & Tubing Tri-Lobe Profile

8-0 PTO PARTS AND COMPONENTS EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION North American SERIES 6 OLD GUARDS OLD NYLON BEARING KITS NEW GUARDS NEW NYLON BEARING KITS PTO 9000648 PTO 9200600/ PTO 9204P5 PTO 9002548 PTO 920600 PTO 9000660 PTO 9200600/ PTO 9204P5 PTO 9002560 PTO 920600 W PTO 9000748 PTO 92004 PTO 9002548 PTO 92570 2 4 35 44 55 PTO 900248 PTO 920200/ PTO 9204P6 PTO 9002548 PTO 92200 PTO 900260 PTO 920200/ PTO 9204P6 PTO 9002560 PTO 92200 PTO 900248 PTO 920200/ PTO 920507 PTO 9002548 PTO 92200 PTO 900260 PTO 920200/ PTO 920507 PTO 9002560 PTO 92200 PTO 9003548 PTO 9203500/ PTO 9205084 PTO 9002548 PTO 92200 PTO 9003560 PTO 9203500/ PTO 9205084 PTO 9002560 PTO 92200 PTO 9004448 PTO 9204400 PTO 9023548 PTO 924400 PTO 9004460 PTO 9204400 PTO 9023560 PTO 924400 PTO 9004448 PTO 9204400 PTO 9023548 PTO 924400 PTO 9004460 PTO 9204400 PTO 9023560 PTO 924400 PLEASE NOTE! Not all guard and nylon bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. Make sure guard rotates freely on the yokes. The nylon bearings provided are the most popular in the replacement market. If the nylon bearing provided is not a proper fit, it is essential that the proper nylon bearing is identified to insure proper performance and safety. To assist in ordering the proper nylon bearing, listed in this brochure are stock numbers and dimensions for nylon bearings. All Series North American guards are provided without nylon bearings. To help assure the proper set of nylon bearings are installed, one nylon bearing set will be exactly the same (nylon bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these nylon bearing kits. ALL GUARDS ARE PROVIDED WITHOUT NYLON BEARINGS - ORDER NYLON BEARINGS SEPARATELY.

PTO PARTS AND COMPONENTS 8- EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION INTERCHANGES WITH SERIES ByPy ByPy 2 ByPy 3 & 4 ByPy 5 ByPy 6 ByPy 7 ByPy 8 & 9 W/S 200 (AW0) W/S 2200 (AW20) & W/S I (AWII) W/S 2300 (AW2) W/S 220 (AW22), W/S 2400 (AW35) & W/S 2500 (AW36) W/S 2600 (AW26) OLD GUARDS OLD NYLON BEARING KITS NEW GUARDS NEW NYLON BEARING KITS PTO 900834 PTO 96000 PTO 9002548 PTO 965029 PTO 900848 PTO 96000 PTO 9002548 PTO 965029 PTO 900854 PTO 96000 PTO 9002560 PTO 965029 PTO 9008234 PTO 9600202 PTO 9002548 PTO 962502 PTO 9008248 PTO 9600202 PTO 9002548 PTO 962502 PTO 9008254 PTO 9600202 PTO 9002560 PTO 962502 PTO 9008234 PTO 9600234 PTO 9002548 PTO 962534 PTO 9008248 PTO 9600234 PTO 9002548 PTO 962534 PTO 9008254 PTO 9600234 PTO 9002560 PTO 962534 PTO 9008534 PTO 9600305 PTO 9023548 PTO 963505 PTO 9008548 PTO 9600305 PTO 9023548 PTO 963505 PTO 9008554 PTO 9600305 PTO 9023560 PTO 963505 PTO 9008634 PTO 9600467 PTO 9023548 PTO 963567 PTO 9008648 PTO 9600467 PTO 9023548 PTO 963567 PTO 9008654 PTO 9600467 PTO 9023560 PTO 963567 PTO 9008634 PTO 9600467 PTO 9023548 PTO 963567 PTO 9008648 PTO 9600467 PTO 9023548 PTO 963567 PTO 9008654 PTO 9600467 PTO 9023560 PTO 963567 PTO 9006934 PTO 9600489 PTO 9004548 PTO 964589 PTO 9006948 PTO 9600489 PTO 9004548 PTO 964589 PTO 9006954 PTO 9600489 PTO 9004560 PTO 964589 PTO 900834 PTO 960005 PTO 9002548 PTO 965005 PTO 900848 PTO 960005 PTO 9002548 PTO 965005 PTO 900854 PTO 960005 PTO 9002560 PTO 965005 PTO 9008234 PTO 960025 PTO 9002548 PTO 96025 PTO 9008248 PTO 960025 PTO 9002548 PTO 96025 PTO 9008254 PTO 960025 PTO 9002560 PTO 96025 PTO 9008234 PTO 960025 PTO 9002548 PTO 96025 PTO 9008248 PTO 960025 PTO 9002548 PTO 96025 PTO 9008254 PTO 960025 PTO 9002560 PTO 96025 PTO 9008534 PTO 9600325 PTO 9023548 PTO 963525 PTO 9008548 PTO 9600325 PTO 9023548 PTO 963525 PTO 9008554 PTO 9600325 PTO 9023560 PTO 963525 PTO 9008634 PTO 9600435 PTO 9004548 PTO 964535 PTO 9008648 PTO 9600435 PTO 9004548 PTO 964535 PTO 9008654 PTO 9600435 PTO 9004560 PTO 964535

8-2 PTO PARTS AND COMPONENTS EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION Nylon Bearing Repair Kits TYPE A - FITS 250 GUARDS SERIES GUARD TYPE SERIES GUARD TYPE NORTH AMERICAN SERIES DIM A INNER BRG ID NORTH AMERICAN SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM B INNER BRG OD DIM A OUTER BRG ID DIM A OUTER BRG ID DIM B OUTER BRG OD PTO 920600 6 250 46.4 mm (.83") 7.4 mm (2.8") 46.4 mm (.83") 7.4 mm (2.8") PTO 92200 2, 4 & 35 250 52.8 mm (2.08") 7.4 mm (2.8") 52.8 mm (2.08") 7.4 mm (2.8") PTO 92570 W 250 4.8 mm (.65") 7.4 mm (2.8") 4.8 mm (.65") 7.4 mm (2.8") SERIES GUARD TYPE METRIC SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM A2 OUTER BRG OD PTO 965029 ByPy 250 34.5 mm (.36") 7.4 mm (2.8") 40.4 mm (.59") 7.4 mm (2.8") PTO 962502 ByPy 2 250 40.4 mm (.59") 7.4 mm (2.8") 47.4 mm (.87") 7.4 mm (2.8") PTO 962534 ByPy 3 & 4 250 47.4 mm (.87") 7.4 mm (2.8") 53.4 mm (2.0") 7.4 mm (2.8") PTO 965005 W/S 200 250 4.4 mm (.63") 7.4 mm (2.8") 4.4 mm (.63") 7.4 mm (2.8") PTO 96025 W/S 2200, W/S I & W/S 2300 250 50.8 mm (2.00") 7.4 mm (2.8") 50.8 mm (2.00") 7.4 mm (2.8") TYPE B - FITS 350/450 GUARDS DIM B OUTER BRG OD PTO 924400 44 & 55 350 67.2 mm (2.65") 83.6 mm (3.29") 67.2 mm (2.65") 83.6 mm (3.29") SERIES GUARD TYPE METRIC SERIES DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM B OUTER BRG OD PTO 963505 ByPy 5 350 53.5 mm (2.") 83.6 mm (3.29") 62.7 mm (2.47") 83.6 mm (3.29") PTO 963567 ByPy 6 & 7 350 59.4 mm (2.34") 83.6 mm (3.29") 68.4 mm (2.69") 83.6 mm (3.29") PTO 964589 ByPy 8 & 9 450 68.4 mm (2.69") 03 mm (4.06") 80.4 mm (3.7") 03 mm (4.06") PTO 963525 W/S 220, W/S 2400 & W/S 2500 350 62.5 mm (2.46") 83 mm (3.27") 62.5 mm (2.46") 83 mm (3.27") PTO 964535 W/S 2600 450 82.8 mm (3.26") 03 mm (4.05") 82.8 mm (3.26") 03 mm (4.05") TYPE C SERIES PREVIOUS-STYLE METRIC NYLON BEARING KIT DIM A INNER BRG ID DIM B INNER BRG OD DIM A OUTER BRG ID DIM B OUTER BRG OD PTO 96000 ByPy 34.8 mm (.37") 57 mm (2.24") 40.8 mm (.6") 57 mm (2.24") PTO 9600202 ByPy 2 40.4 mm (.59") 7.4 mm (2.8") 47.4 mm (.87") 7.4 mm (2.8") PTO 9600234 ByPy 3 & 4 47.4 mm (.87") 7.4 mm (2.8") 53.4 mm (2.0") 7.4 mm (2.8") PTO 9600305 ByPy 5 53.4 mm (2.0") 8.7 mm (3.22") 62.7 mm (2.47") 8.7 mm (3.22") PTO 9600467 ByPy 6 & 7 59.4 mm (2.34") 98.8 mm (3.89") 68.4 mm (2.69") 98.8 mm (3.89") PTO 9600489 ByPy 8 & 9 68.4 mm (2.69") 98.8 mm (3.89") 80.4 mm (3.7") 98.8 mm (3.89") PTO 960005 W/S 200 4.4 mm (.63") 57 mm (2.24") 4.4 mm (.63") 57 mm (2.24") PTO 960025 W/S 2200, AW & W/S 2300 50.8 mm (2.00") 7.4 mm (2.8") 50.8 mm (2.00") 7.4 mm (2.8") PTO 9600325 W/S 220, W/S 2400 & W/S 2500 62.7 mm (2.47") 8.7 mm (3.22") 62.7 mm (2.47") 8.7 mm (3.22") PTO 9600435 W/S 2600 82.8 mm (3.26") 98.8 mm (3.89") 82.8 mm (3.26") 98.8 mm (3.89")

PTO PARTS AND COMPONENTS 8-3 EASY LOCK GUARDING SYSTEM QUICK REFERENCE SECTION Previous-Style North American Nylon Bearing Kit PART NO. DIM A YOKE RACEWAY O.D. NYLON BEARING I.D. DIM B NYLON BEARING O.D. DIM C YOKE RACEWAY WIDTH NYLON BEARING WIDTH PTO 920007 2.5" (2 5 /32") 2.76" (2 3 /4").36" ( 23 /64") PTO 9200069.77" ( 49 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO 9200085 2.02" (2 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO 920002.4" ( 3 /32") 2.02" (2 /64").30" ( 9 /64") PTO 92004.65" ( 2 /32") 2.76" (2 3 /4").36" ( 23 /64") PTO 920065 2.5" (2 5 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO 920095.78" ( 25 /32") 2.52" (2 33 /64").37" ( 3 /8") PTO 9200254.64"( 4 /64") 2.25" (2 /4").29" ( 9 /64") PTO 9200259 2.03" (2 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO 9200260.39" ( 25 /64") 2.77" (2 49 /64").36" ( 23 /64") PTO 9200600.83" ( 53 /64") 2.76" (2 3 /4").25" ( /4") PTO 920200 2.09" (2 3 /32") 2.77" (2 49 /64").32" ( 2 /64") PTO 9202600 2.86" (2 55 /64") 3.56" (3 9 /6").34" ( /32") PTO 9203500 2.08" (2 5 /64") 2.76" (2 3 /4").32" ( 2 /64") PTO 9204400 2.65" (2 2 /32") 3.26" (3 7 /64").36" ( 23 /64") PTO 9204P5.65" ( 2 /32") 2.76" (2 3 /4").30" ( 9 /64") PTO 9204P6.77" ( 49 /64") 2.76" (2 3 /4").36" ( 23 /64") PTO 920507 2.02" (2 /64") 2.76" (2 3 /4").36" ( 23 /64") METAL RETAINING RING PTO 9205084 2.5" (2 5 /32") 2.76" (2 3 /4").36" ( 23 /64") (Kit includes nylon bearing and metal retaining ring) REPRESENTATIVE DRIVELINE SHOWING OVERALL REPRESSENTATIVE DRIVELINE SHOWING CENTERLINE TO CENTERLINE

8-4 PTO PARTS AND COMPONENTS 000 SERIES CROSS REFERENCE QUICK REFERENCE SECTION 0-549NEAPCO 0-52 WESTWARD - PTO 80205 - PTO 80206 - PTO 000036-070 PTO 200000 0-0322 PTO 00004 0-0333 PTO 00002 0-0383 PTO 000007 0-04 PTO 8008 0-042 PTO 80404 0-043 PTO 000045 0-0422 PTO 80402 0-0423 PTO 000056 0-0452 PTO 80406 0-0463 or 0-4453 PTO 000049 0-0473 PTO 80005 0-0483 PTO 80006 0-0493 PTO 00005 0-532 PTO 000034 0-557 PTO 000037 0-574 PTO 80609 0-702 PTO 000039 0-703 PTO 000040 0-705 PTO 00004 0-707 PTO 000043 0-708 PTO 000044 0-765 PTO 82020 0-322 PTO 00005 0-363 PTO 00003 0-383 PTO 000062 0-423 PTO 000055 0-439 PTO 02006 0-443 PTO 000053 0-453 PTO 80009 0-463 PTO 80007 0-473 PTO 80003 0-483 PTO 000058 0-493 PTO 000054 0-4293 PTO 000060 0-4363 PTO 802020 0-4373 PTO 80000 0-4443 PTO 000059 0-4473 PTO 000052 0-448 PTO 8003 0-4573 or 0-4493 PTO 000033 0-4693 PTO 000038 0-4943 PTO 000057 0-53 PTO 000048 0-529 PTO 300000 0-53 PTO 700000 0-549 PTO 000035 0-526 PTO 00006 0-533 PTO 80603 0-5354 PTO 000042 SPICER WESTWARD - PTO 300000 - PTO 700000 - PTO000044 - PTO 80206 - PTO 802020 - PTO 000034 - PTO 000042 - PTO 000043 - PTO 000037 - PTO 000035 - PTO 000036 - PTO 80603 - PTO 00006 - PTO 80609 0-3-22X PTO 00005 0-3-63X PTO 00003 0-3-83X PTO 000062 0-3-22X PTO 00004 0-3-33X PTO 00002 0-3-5X PTO 82020 0-3-83X PTO 000007 0-4-0X PTO 02006 0-4-03 PTO 000053 0-4- PTO 8008 0-4-3 PTO 000052 0-4-2 PTO 80404 0-4-23 PTO 000054 0-4-3 or 0-4-33 PTO 000045 0-4-53 PTO 80009 0-4-63 PTO 80007 0-4-83 PTO 000058 0-4-93 PTO 000055 0-4-22 PTO 80402 0-4-23 PTO 000056 0-4-293 PTO 000060 0-4-373 PTO 80000 0-4-43 PTO 80003 0-4-443 PTO 000059 0-4-453 or 0-4-253 PTO 000049 0-4-48 PTO 8003 0-4-52 PTO 80406 0-4-53 PTO 000057 0-4-573 PTO 00005 0-4-63 PTO 000048 0-4-643 PTO 80205 0-4-693 PTO 000038 0-4-703 PTO 000040 0-4-73 PTO 000039 0-4-723 PTO 00004 0-4-73 PTO 80005 0-4-83 PTO 80006 0-4-93 PTO 000033 HM70 PTO 200000

PTO PARTS AND COMPONENTS 8-5 STANDARD SPLINES FOR AGRICULTURE " X 5 /8" X 6 TYPE 3 /8" X 6 TYPE 2 3 /8" X 2 3 /4" X 6 TYPE 3 3 /4" X 20

8-6 PTO PARTS AND COMPONENTS PTO CROSS & BEARING "E" KITS ENOUGH LUBE FOR THE ENTIRE SEASON! Higher torque capacity Interchangeable with standard kit More production between lube cycles Reduced downtime on drivelines Larger roller bearings Superior performance! Improved orange triple lipped seal for longer life PTO 2002400 North American Point of Purchase Display Includes: 4 of PTO 200600 0 of PTO 203500 6 of PTO 20200 2 of PTO 204400 6 of PRO 20400 2 of PTO 205500 PTO 2008400 Metric Point of Purchase Display Includes: 4 of PTO 20654 2 of PTO 207989 2 of PTO 206580 2 of PTO 20826 2 of PTO 206806 2 of PTO 208370 2 of PTO 20755 8 of PTO 208474 2 of PTO 207676 2 of PTO 208692 DESCRIPTION NORTH AMERICAN E-KITS PTO 200600 3 /32" to 2 5 /6" PTO 20200 /6" to 2 9 /6" PTO 20400 /8" to 2 5 /8" PTO 203500 /4" to 3 7 /32" PTO 204400 5 /6" to 4" PTO 205500 7 /32" x 4 5 /6" METRIC E-KITS PTO 20654 22 x 54 mm PTO 206580 30.2 x 80 mm PTO 206794 35 x 94 mm PTO 206806 35 x 06.5 mm PTO 206908 4 x 08 mm PTO 207004 42 x 04 mm PTO 20755 22 x 55 mm PTO 207276 - DESCRIPTION METRIC E-KITS PTO 20749 - PTO 207676 32 x 76 mm PTO 207694 - PTO 207906 - PTO 207989 36 x 89 mm PTO 20826 23.8 x 6.3 mm PTO 208370 27 x 70 mm PTO 208474 27 x 74.6 mm PTO 208692 30.2 x 92 mm PTO 208706 30.2 x 06.5 mm NORTH AMERICAN POINT OF PURCHASE DISPLAY PTO 2002400 Standard Display METRIC POINT OF PURCHASE DISPLAY PTO 2008400 Metric Display

PTO PARTS AND COMPONENTS 8-7 LOCKING DEVICE QUICK REFERENCE SECTION Safety Slide Lock An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust. Spring-Lok The collar is spring loaded for ease of installation and positive locking to tractor shaft. Quick Disconnect A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO 3004000 PTO 3004020 PTO 300405 DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline Repair Kit for " x 5 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls. Spring-Lock PTO 300300 PTO 30035 DESCRIPTION Repair Kit for Weasler Spring-Lok, 6 Spline & 2 Spline " x 5 Spline Quick Disconnect PTO 3002006 PTO 3002806 PTO 300202 PTO 3002020 DESCRIPTION Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 3 /4" x 6 Spl. Weasler 2 Spline and Hex Quick Disconnect Weasler 20 Spline

8-8 PTO PARTS AND COMPONENTS PART NUMBER EXPLANATION DRIVELINE COMPONENTS Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight digit stock number to insure correct identification of each component. Example: 00 prefix denotes a Spring-Lok Tractor Yoke on the exploded view. (When ordering a tractor yoke, be sure the stock number begins with 00.) Number Identification Examples: 02-06 06 200-06 00 300-2 00 400-6 8 500-35 00 6 Spline 6 Series QD Yoke Tractor Yoke 6 Series Cross & Bearing Kit 2 Series Shaft Weld Yoke * /8" *" Shaft 35 Series Slip Sleeve 602-44 00 70-44 00 800-35 24 900-45 48 (*Expressed in /6 inches.) 44 Series Tube 44 Series Tube Weld Yoke * /2" Round Bore 35 Series Implement Yoke For 48" O.A. Driveline Guard Type Plastic Guard

PTO PARTS AND COMPONENTS 8-9 TRANSPARENCY IDENTIFICATION SYSTEM DRIVELINE COMPONENTS For Driveline Components The individual transparency cards will allow the user to easily identify driveline components. Cross and Bearing Kits may be identified by the bearing cap outside diameter and the width of the cross. Yokes may be identified by the hole in the ear and profile. Tubes and shafts may be identified by the end sections. How to use the Transparency Identification System:. Match the part to be replaced with the corresponding transparency card for identification. 2. Select the proper stock number for the replacement part. PTO 2002500

8-20 PTO PARTS AND COMPONENTS 6 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO 000606 PTO 00062 Auto-Lok Repair Kit - Page 49 PTO 0060 PTO 0065 Quick Disconnect Repair Kit - Page 49 PTO 020606 PTO 02062 DIM. "A" BORE 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM. "A" BORE.98" x 0 Spl. " x 5 Spl. Spring-Lok (metal collar) Lawn & Garden Repair Kit - Page 49 PTO 05060 (Auto-Lok) PTO 05065 (Spring-Lok) Male Spline Lawn & Garden DIM. "A" BORE 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM. "A" BORE.98" x 0 Spl. " x 5 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM. "A" DIM. "B" PTO 2000600 3 /32" 2 9 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM. "A" DIM. "B" PTO 200600 3 /32" 2 9 /32" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM. "A" BORE DIM. "B" BORE PTO 3000600-3 /4" x 7 /8" PTO 3020600 " x 5 Spl. - PTO 3030600-3 /4" x 7 /8" Without Bearing Groove DIM. "A" DIM. "B" PTO 06065 " x 5 Spl. 5.38 PTO 300600 DIM. "A" BORE " x 5 Spl.

PTO PARTS AND COMPONENTS 8-2 6 SERIES DRIVELINE COMPONENTS Shaft 3 /4" x 7 /8" Rectangular PTO 40024 6' PTO 4024 0' PTO 40424 3' " x 5 Spline (Induction Hardened) Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM. "A" BORE FITS TUBE SIZE PTO 7000600 " x /8" - PTO 700600 - /2" (.065 Wall) (Guard must rotate freely on yoke) PTO 40465H 3' Slip Sleeve With Grease Groove PTO 7020600 (without Bearing Groove) PTO 7030600 (with Groove) Implement Yoke Round Bore With Keyway & Set Screw FITS TUBE SIZE /2" (.065 Wall) /2" (.065 Wall) DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO 500600 4" 3 /4" x 7 /8" Rect. - /2" (.065 Wall) PTO 50065 3" - " x 5 Spl. /2" (.065 Wall) Tube " x /8" Rectangular O.D. FITS SHAFT PTO 60068 6' 3 /4" x 7 /8" PTO 6068 0' 3 /4" x 7 /8" PTO 60468 3' 3 /4" x 7 /8" /2" Round (.065 Wall) O.D. PTO 6020600 6' PTO 6040600 3' STANDARD KEYWAY PTO 800060 5 /8" 3 /6" PTO 800062 3 /4" 3 /6" PTO 800063 3 /6" 3 /6" PTO 800064 7 /8" 3 /6" PTO 800065 5 /6" /4" PTO 800066 " /4" PTO 800068 /8" /4" PTO 800069 3 /6" /4" PTO 8000620 /4" /4" Spline Bore With /4" Pin Hole PTO 800606 PTO 80068 Shear Pin With /4" Pin Hole 3 /8" x 6 Spl. /8" x 6 Spl. PTO 802066 " PTO 802068 /8" PTO 8020620 /4" PTO 802064 7 /8"

8-22 PTO PARTS AND COMPONENTS 6 SERIES Implement Yoke (cont'd) Square Bore With Set Screw PTO 804062 3 /4" PTO 804064 7 /8" PTO 804066 " PTO 804068 /8" PTO 8040620 /4" Round Bore Double Keyway & Set Screw Yoke & Shaft Assembly SHAFT SIZE DRIVELINE COMPONENTS CENTERLINE TO END OF SHAFT DIMENSION PTO 000060 " x 5 Spl. 2.50" PTO 0000648 3 /4" x 7 /8" 38.75" Yoke & Tube Assembly " x /8" Tube DOUBLE KEYWAY PTO 806060 5 /8" 3 /6" & /8" PTO 806062 3 /4" 3 /6" & /4" PTO 806063 3 /6" 3 /6" & /4" PTO 806064 7 /8" 3 /6" & /4" PTO 806066 " 3 /6" & /4" PTO 806068 /8" /4" & 5 /6" PTO 806069 3 /6" /4" & 5 /6" PTO 8060620 /4" /4" & 5 /6" FITS SHAFT CENTERLINE TO END OF TUBE DIMENSION PTO 000648 3 /4" x 7 /8" 38.75" Guard Clamp Yoke With Bolt Hole & Set Screw DIM "A" BORE DIM "B" BORE KEYWAY PTO 807064 7 /8" - 3 /6" PTO 807065 - " x 5 Spl. - PTO 807066 " - /4" Stock Bore With Hub O.D. Turned PTO 8090608 /2" Order bearings as required. OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 920600 PTO 9002560 60" PTO 920600 Assembly instructions included with guard. Note: When installing Guards, observe the following: ) Install proper nylon bearing (see page 0). 2) Guards must rotate freely on yokes. Slip Sleeve Yoke Easy Lock Replacement Kit DIM "A" BORE DIM "B" BORE DIM "C" BORE DIM "D" PTO 808062 3 /4" Sq. - - 5 /2" PTO 808064 7 /8" Sq. - - 5 /2" PTO 82065 - " x 5 Spl. - 5 /2" PTO 830600 - - 3 /4" x 7 /8" Rect. 5 /2" PTO 3005000 (4 per kit)

PTO PARTS AND COMPONENTS 8-23 6 SERIES DRIVELINE COMPONENTS Universal Joints Round to Round Furnished with Keyway & Set Screw PTO 52062 3 /4" PTO 56066 " Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48". TRACTOR YOKE OVERALL COMPRESSED DIM "A" OVERALL COMPRESSED DIM "A" PTO 4000648 3 /8" x 6 Spl. Spring Lok 48" PTO 400648 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO 4000600 3 /8" x 6 Spl. Spring Lok " Round with /2" Pin Hole 39" Finishing Mower PTO 4000605 3 /8" x 6 Spl. Spring Lok " Round with 5 /6" Pin Hole 32 /2" All Purpose PTO 400066 3 /8" x 6 Spl. Spring Lok " Round /4" Keyway 48" Auger PTO 4000620 3 /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok 27 /4" Fertilizer Spreader PTO 4000638 3 /8" x 6 Spl. Q.D. " Round with Pinhole 38" All Purpose

8-24 PTO PARTS AND COMPONENTS 2 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO 00206 PTO 0022 Quick Disconnect Repair Kit - Page 49 PTO 02206 PTO 0222 Ball Shear Device With Spring-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. SHEAR BOLT PTO 04206 3 /8" x 6 Spl. 5 /6" - 8 Gr. 5 PTO 0422 3 /8" x 2 Spl. 5 /6" - 8 Gr. 5 Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO 200200 /6" 2 /2" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO 20200 /6" 2 /2" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 300200 " x /8" PTO 30200 Shaft 5 /6" Sq. " x /8" Rectanglular PTO 40068 6' PTO 4068 0' PTO 40468 3' Slip Sleeve With Grease Groove DIM "B" BORE FITS TUBE SIZE PTO 500400 " x /8" Rect. - 5" 2" (.083 Wall) PTO 50400 - Tube 5 /6" x 20 Spl. /4" x 3 /8" Rectangular O.D. FITS SHAFT PTO 6002022 6' " x /8" PTO 602022 0' " x /8" PTO 6042022 3' " x /8" 8" 2" (.083 Wall)

PTO PARTS AND COMPONENTS 8-25 2 SERIES DRIVELINE COMPONENTS Tube (cont'd) 2" (.083 Wall) PTO 602400 6' PTO 603400 0' PTO 604400 3' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 700200 /4" x 3 /8" DIM "B" FITS TUBE SIZE PTO 70200-2" (.083 Wall) PTO 702200 Implement Yoke /4" Sq. Round Bore With Keyway & Set Screw Implement Yoke (cont'd) Shear Pin With /4" Pin Hole PTO 80226 " PTO 80228 /8" PTO 802220 /4" PTO 802222 3 /8" Square Bore With Set Screw PTO 80424 7 /8" PTO 80426 " PTO 80428 /8" PTO 804220 /4" Hexagon Bore With Set Screw PTO 80528 /8" PTO 805220 ¼" Round Bore Double Keyway & Set Screw STANDARD KEYWAY PTO 80022 3 /4" 3 /6" PTO 80024 7 /8" 3 /6" PTO 80025 5 /6" /4" PTO 80026 " /4" PTO 80028 /8" /4" PTO 80029 3 /6" /4" PTO 800220 /4" /4" PTO 800222 3 /8" 5 /6" PTO 800224 /2" 3 /8" Spline Bore With 2 /64" Pin Hole DOUBLE KEYWAY PTO 80626 " /4" & 3 /6" PTO 80628 /8" /4" & 5 /6" PTO 806220 /4" /4" & 5 /6" Stock Bore With Hub O.D. Turned PTO 809208 /2" Slip Yoke PTO 80206 3 /8" x 6 Spl. PTO 8020* 3 /6" x 0 Spl. PTO 80826 " Sq. PTO 8023.90" x 3 Spl. w/set Screw PTO 8026 " Rd. with /4" Keyway PTO 8028 /8" x 6 Spl. PTO 8028 /8" Rd. with 5 /6" Keyway PTO 8022 *No pin hole 3 /8" x 2 Spl. PTO 82065 PTO 828 " x 5 Spl. /8" Hex

8-26 PTO PARTS AND COMPONENTS 2 SERIES DRIVELINE COMPONENTS Yoke & Shaft Assembly " x /8" Shaft Yoke & Tube Assembly /4" x 3 /8" Tube CENTERLINE TO END OF SHAFT DIMENSION PTO 000248 37.38" PTO 000260 49.38" Guard FITS SHAFT CENTERLINE TO END OF TUBE DIMENSION PTO 00248 " x /8" 37.38" PTO 00260 " x /8" 49.38" Easy Lock Replacement Kit Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 920600 PTO 9002560 60" PTO 920600 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. PTO 3005000 (4 per kit) Universal Joint Spring Lok to Shaft Weld Yoke Repair Kit - Page 49 DIM "B" BORE PTO 506200 3 /8" x 6 Spl. " x /8" Rect. Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". PTO 400248 PTO 400260 TRACTOR YOKE 3 /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok OVERALL COMPRESSED DIM "A" 48" 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". OVERALL COMPRESSED DIM "A" PTO 40248 48" PTO 40260 60" PTO 202248 (with crosses installed) 48" PTO 403248 (with 5 /6" Sq. Shaft) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO 400200 3 /8" x 6 Spl. Q.D. /4" Rd with /4" Keyway 48" Post Hole Digger PTO 400220 3 /8" x 6 Spl. Spring Lok /4" Rd with /4" Keyway 48" Augers

PTO PARTS AND COMPONENTS 8-27 4 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO 00406 PTO 0042 Safety Slide Lock Repair Kit - Page 49 PTO 0420 Quick Disconnect Repair Kit - Page 49 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /4" x 20 Spl. DIM "B" BORE PTO 02406 3 /8" x 6 Spl. - PTO 0248 - /8" Hex PTO 0242 3 /8" x 2 Spl. - Ball Shear Device With Spring-Lok Repair Kit - Page 49 SHEAR BOLT PTO 04406 3 /8" x 6 Spl. 5 /6" - 8 Gr. 5 PTO 0442 3 /8" x 2 Spl. 5 /6" - 8 Gr. 5 Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 200400 /8" 2 5 /8" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 20400 /8" 2 5 /8" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO 300400 " x /8" - PTO 30400-5 /6" x 20 Spl. Shaft " x /8" Rectangular PTO 40068 6' PTO 4068 0' PTO 40468 3' 5 /6" x 20 Spline Induction Hardened Slip Sleeve PTO 404220 3' " x /8" Rectangular With Grease Groove FITS TUBE SIZE PTO 500400 5" 2" (.083 Wall)

8-28 PTO PARTS AND COMPONENTS 4 SERIES DRIVELINE COMPONENTS Slip Sleeve (cont'd) 5 /6" x 20 Spline With Grease Reservoir FITS TUBE SIZE PTO 50400 8" 2" (.083 Wall) Tube /4" x 3 /8" Rectangular O.D. FITS SHAFT PTO 6002022 6' " x /8" PTO 602022 0' " x /8" PTO 6042022 3' " x /8" 2" Round (.083 Wall) PTO 602400 6' PTO 603400 0' PTO 604400 3' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" FITS TUBE SIZE PTO 700400 /4" x 3 /8" - PTO 70400-2" (.083 Wall) Implement Yoke Round Bore With Keyway & Set Screw Implement Yoke (cont'd) Spline Bore With 2 /64" Pin Hole PTO 80406 PTO 8048 PTO 80420 PTO 8042 Shear Pin With /4" Pin Hole Square Bore With Set Screw PTO 80444 7 /8" PTO 80446 " PTO 80448 /8" PTO 80449 3 /6" PTO 804420 /4" Hexagon Bore With Set Screw 3 /8" x 6 Spl. /8" x 6 Spl. /4" x 6 Spl. 3 /8" x 2 Spl. PTO 80248 /8" PTO 802420 /4" PTO 802422* 3 /8" PTO 802424 /2" *With /4" and /2" pin hole. Torque Limiter Flange (Interchanges with Great Lakes Clutch) PTO 803400 PTO 80548 /8" PTO 805420 /4" Round Bore Double Keyway & Set Screw STANDARD KEYWAY PTO 80046 " /4" PTO 80048 /8" /4" PTO 80049 3 /6" /4" PTO 800420 /4" /4" PTO 800422 3 /8" 5 /6" PTO 800423 7 /6" 3 /8" PTO 800424 /2" 3 /8" DOUBLE KEYWAY PTO 80648 /8" /4" & 5 /6" PTO 80649 3 /6" /4" & 5 /6" PTO 806420 /4" /4" & 5 /6" Stock Bore With Hub O.D. Turned PTO 80942 3 /4"

PTO PARTS AND COMPONENTS 8-29 4 SERIES Guard Easy Lock Replacement Kit DRIVELINE COMPONENTS Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 92200 PTO 9002560 60" PTO 92200 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Yoke & Shaft Assembly " x /8" Shaft CENTERLINE TO END OF SHAFT DIMENSION PTO 000438 26.2" PTO 000448 35.62" PTO 000460 47.62" PTO 3005000 (4 per kit) Yoke, Tube & Sleeve Assembly " x /8" Rectangular CENTERLINE TO END OF TUBE DIMENSION PTO 00438 26.2" PTO 00448 35.2" PTO 00460 48.2" Universal Joints Spring-Lok to Shaft Weld Yoke Repair Kit - Page 6 DIM "B" BORE PTO 506400 3 /8" x 6 Spl. " x /8" Rect. Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". PTO 400448 PTO 400460 TRACTOR YOKE 3 /8" x 6 Spl. Spring Lok 3 /8" x 6 Spl. Spring Lok OVERALL COMPRESSED DIM "A" 48" 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". OVERALL COMPRESSED DIM "A" PTO 40448 48" PTO 40460 60" PTO 402448 (with crosses installed) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO 400404 3 /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 30 3 /6" 4 ft. Lift Type Rotary Cutter PTO 400405 3 /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 37 3 /6" 5 ft. Lift Type Rotary Cutter PTO 400406 3 /8" x 6 Spl. Spring Lok 3 /8" Round with /2" Shear Pin Hole 56 3 /6" 5 & 6 ft. Pull Type Rotary Cutter PTO 400420 3 /8" x 6 Spl. Spring Lok /4" Round with /4" Keyway 48" Auger

8-30 PTO PARTS AND COMPONENTS 35 SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 03506 PTO 03520 PTO 0352 Quick Disconnect Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "B" BORE PTO 023505 - /4" Hex PTO 023506 3 /8" x 6 Spl. - PTO 02358 - /8" Hex PTO 023520 3 /4" x 20 Spl. - PTO 02352 3 /8" x 2 Spl. - PTO 023528 3 /4" x 6 Spl. - Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 SHEAR BOLT PTO 043506 3 /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO 043520 3 /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO 04352 3 /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 PTO 03506 PTO 03520 PTO 0352 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 2003500 /4" 3 7 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 203500 /4" 3 7 /32" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO 3003500 3 /6" Sq. - PTO 303500-5 /6" x 20 Spl. PTO 3023500 - /6" x 20 Spl. Shaft 3 /6" Square PTO 400009 6' PTO 40009 0' PTO 404009 3'

PTO PARTS AND COMPONENTS 8-3 35 SERIES DRIVELINE COMPONENTS Shaft Spline Shaft Induction Hardened Implement Yoke Round Bore With Keyway & Set Screw DIM "A" SIZE PTO 404220 5 /6" x 20 Spl. 3' PTO 4042720 /6" x 20 Spl. 3' Slip Sleeve With Grease Groove DIM "B" BORE FITS TUBE SIZE PTO 5003500 5" 3 /6" Sq. - 2 /8" (.20 Wall) PTO 503500 5" 3 /6" Sq. - 2 /8" (.083 Wall) & 2 /4" (.20 Wall) PTO 5043500 8" 5 /6" Sq. - 2 /2" (.20 Wall) PTO 5053500 5" - /6" x 20 Spl. 2 /2" (.20 Wall) Spline Sleeve With Grease Reservoir STANDARD KEYWAY PTO 800356 " /4" PTO 800358 /8" /4" PTO 800359 3 /6" /4" PTO 8003520 /4" /4" PTO 8003522 3 /8" 5 /6" PTO 8003523 7 /6" 3 /8" PTO 8003524 /2" 3 /8" PTO 8003524H /2" 3 /8" with Pin hole PTO 8003526 5 /8" 3 /8" PTO 8003528 3 /4" 3 /8" Spline Bore With 2 /64" Pin Hole PTO 803506 PTO 80352 3 /8" x 6 Spl. 3 /8" x 2 Spl. FITS TUBE SIZE PTO 5023500 8" 5 /6" x 20 Spl. 2 /8" (.20 Wall) PTO 5033500 8" /6" x 20 Spl. 2 /2" (.20 Wall) Tube DIM "A" SIZE PTO 6023500 2 /8" (.20 Wall) 6' PTO 602350 2 /8" (.083 Wall) 6' PTO 6033500 2 /8" (.20 Wall) 0' PTO 6043500 2 /8" (.20 Wall) 3' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 703500 PTO 7023500 PTO 7033500 with Bore** PTO 7043500 with Bore** PTO 7053500 with Bore** **Bore through for telescoping shaft. FITS TUBE SIZE 2 /8" (.20 Wall) 2 /8" (.083 Wall) 2 /4" (.20 Wall) 2 /2" (.20 Wall) 2 /8" (.20 Wall) Shear Pin With /4" Pin Hole PTO 8023520 /4" PTO 8023522* 3 /8" PTO 8023524 /2" *With /2" Pin Hole Torque Limiter Flange (Interchanges with Great Lakes Clutch) Square Bore With Set Screw PTO 8033500 PTO 804356 " PTO 804358 /8" PTO 804359 3 /6" PTO 8043520 /4" PTO 8043524 /2" PTO 8043526 5 /8"

8-32 PTO PARTS AND COMPONENTS 35 SERIES DRIVELINE COMPONENTS Implement Yoke Round Bore With Double Keyway & Set Screw Yoke & Shaft Assembly 3 /6" Square Shaft DOUBLE KEYWAY PTO 806359 3 /6" /4" & 5 /6" PTO 8063520 /4" /4" & 5 /6" PTO 8063522 3 /8" 5 /6" & 3 /8" Clamp Yoke PTO 8073520 PTO 807352 PTO 8073527 Stock Bore With Hub O.D. Turned 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl. PTO 809356 " Guard Yoke, Tube & Sleeve Assembly 3 /6" Square CENTERLINE TO END OF SHAFT DIMENSION PTO 000353 7.69" PTO 0003535 2.69" PTO 0003542 28.69" PTO 0003548 33.9" PTO 0003560 44.94" CENTERLINE TO END OF TUBE DIMENSION PTO 00353 7.69" PTO 003535 2.69" PTO 003543 29.69" PTO 003548 34.69" PTO 003560 46.69" Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 92200 PTO 9002560 60" PTO 92200 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Universal Joints Quick Disconnect to Shaft Weld Yoke Repair Kit - Page 46 DIM "B" BORE PTO 5063500 3 /8" x 6 Spl. 3 /6" Sq. Easy Lock Replacement Kit PTO 3005000 (4 per kit)

PTO PARTS AND COMPONENTS 8-33 35 SERIES DRIVELINE COMPONENTS Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 3", 35", 48" or 60". TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO 400353 3 /8" x 6 Spl. Q.D. 3" PTO 4003535 3 /8" x 6 Spl. Q.D. 35" PTO 4003548 3 /8" x 6 Spl. Q.D. 48" PTO 4003560 3 /8" x 6 Spl. Q.D. 60" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 39", 48" or 60". OVERALL COMPRESSED DIM "A" PTO 403548 48" PTO 403560 60" PTO 4023539 (with crosses installed) 39" PTO 4023548 (with crosses installed) 48" TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED DIM "A" APPLICATION PTO 4003507 3 /8" x 6 Spl. Q.D. 3 /8" Round with /2" Shear Pin Hole 64 7 /8" 7 ft. Pull Type Rotary Cutter PTO 4003524 3 /8" x 6 Spl. Q.D. /2" Round with 3 /8" Keyway 48" Pumps PTO 4003536 3 /8" x 6 Spl. Safety Slide Lock 3 /8" 6 Spl. Safety Slide Lock 36" All Purpose

8-34 PTO PARTS AND COMPONENTS 44 SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 04406 PTO 04420 PTO 0442 Quick Disconnect Repair Kit - Page 49 PTO 024406 PTO 024420 PTO 02442 Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. SHEAR BOLT PTO 044406 3 /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO 044420 3 /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO 04442 3 /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 Cross & Bearing Kit (R-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO 2004400 5 /6" 4" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Bushing DIM "A" DIM "B" PTO 204400 5 /6" 4" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO 3004400 5 /6" Sq. - PTO 3024400 - /6" x 20 Spl. Shaft 5 /6" Square PTO 400002 6' PTO 40002 0' PTO 404002 3' PTO 04406 PTO 04420 PTO 0442 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Induction Hardened DIM "A" PTO 404220 5 /6" x 20 Spl. 3' PTO 4042720 /6" x 20 Spl. 3'

PTO PARTS AND COMPONENTS 8-35 44 SERIES DRIVELINE COMPONENTS Slip Sleeve With Grease Groove DIM "A" DIM "B" FITS TUBE SIZE PTO 5004400 5" - 5 /6" Sq. 2 /2" (.20 Wall) PTO 5053500 5" /6" x 20 Spl. 2 /2" (.20 Wall) With Grease Reservoir DIM "A" DIM "B" FITS TUBE SIZE Implement Yoke Spline Bore With 2 /64" Pin Hole PTO 804406 PTO 80442 3 /8" x 6 Spl. 3 /8" x 2 Spl. Torque Limiter Flange (Interchanges with Great Lakes Clutch) PTO 8034400 PTO 5023500 5 /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO 5033500 /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO 5043500-5 /6" Sq. 8" 2 /2" (.20 Wall) Tube 2 /2" (.20 Wall) PTO 6024400 6' PTO 6034400 0' PTO 6044400 3' Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 704400 FITS TUBE SIZE 2 /2" (.20 Wall) *PTO 7024400 (with bore) 2 /2" (.20 Wall) *Bore through for telescoping. Implement Yoke STANDARD KEYWAY PTO 8004420 /4" /4" PTO 8004422 3 /8" 5 /6" PTO 8004423 7 /6" 3 /8" PTO 8004424 /2" 3 /8" PTO 8004426 5 /8" 3 /8" PTO 8004428 3 /4" 3 /8" PTO 8004432 2" /2" Square Bore With Set Screw PTO 804448 /8" Round Bore With Double Keyway & Set Screw DOUBLE KEYWAY PTO 8064420 /4" 5 /6" & /4" PTO 8064422 3 /8" 5 /6" & /4" PTO 8064424 /2" 5 /6" & 3 /8" Clamp Yoke Round Bore With Keyway & Set Screw PTO 8074406 PTO 8074420 PTO 807442 PTO 8074427 Stock Bore With Hub O.D. Turned PTO 809446 " 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl.

8-36 PTO PARTS AND COMPONENTS 44 SERIES DRIVELINE COMPONENTS Guard Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 924400 PTO 9023560 60" PTO 924400 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Yoke & Shaft Assembly Easy Lock Replacement Kit PTO 3005000 (4 per kit) Yoke, Tube & Sleeve Assembly DIM "A" DIM "B" CENTERLINE TO END OF SHAFT DIMENSION PTO 0004448 5 /6" Sq. - 33.2" PTO 0004460 5 /6" Sq. - 45.2" PTO 004448 - /6" x 20 Spl. 33.2" DIM "A" BORE DIM "B" BORE CENTERLINE TO END OF TUBE DIMENSION PTO 004448 5 /6" Sq. - 35.62" PTO 004460 5 /6" Sq. - 45.62" PTO 04448 - /6" x 20 Spl. 35.62" Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO 4004448 5 /6" 3 /8" x 6 Spl. Q.D. 48" PTO 4004460 5 /6" 3 /8" x 6 Spl. Q.D. 60" PTO 4044448 /6" x 20 Spl. 3 /8" x 6 Spl. Q.D. 48" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE OVERALL COMPRESSED DIM "A" PTO 404448 5 /6" 48" PTO 404460 5 /6" 60" PTO 4054448 /6" x 20 Spl. 48"

PTO PARTS AND COMPONENTS 8-37 55 SERIES DRIVELINE COMPONENTS Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 05506 PTO 05520 PTO 0552 Quick Disconnect Repair Kit - Page 49 PTO 025506 PTO 02552 PTO 025520 PTO 025528 Ball Shear Device With Safety Slide Lock Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /4" x 20 Spl. 3 /4" x 6 Spl. SHEAR BOLT PTO 045506 3 /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 PTO 045520 3 /4" x 20 Spl. (2) 3 /8" - 6 Gr. 5 PTO 04552 3 /8" x 2 Spl. (2) 3 /8" - 6 Gr. 5 Auto-Lok Repair Kit - Page 49 PTO 05506 PTO 05520 PTO 0552 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 2005500 7 /32" 4 5 /6" Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" PTO 205500 7 /32" 4 5 /6" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE PTO 3005500 5 /6" Sq. - PTO 305500 3 /6" Sq. - PTO 3025500 - /6" x 20 Spl. Shaft 5 /6" Square PTO 400002 6' PTO 40002 0' PTO 404002 3' /6" x 20 Spline Induction Hardened DIM "A" PTO 404220 5 /6" x 20 Spl. 3' PTO 4042720 /6" x 20 Spl. 3'

8-38 PTO PARTS AND COMPONENTS 55 SERIES DRIVELINE COMPONENTS Slip Sleeve With Grease Groove DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO 5004400 5" - 5 /6" Sq. 2 /2" (.20 Wall) PTO 5053500 5" /6" x 20 Spl. 2 /2" (.20 Wall) With Grease Reservoir Implement Yoke Spline Bore With 2 /64" Pin Hole PTO 805506 PTO 80552 Clamp Yoke 3 /8" x 6 Spl. 3 /8" x 2 Spl. DIM "A" BORE DIM "B" BORE FITS TUBE SIZE PTO 5023500 5 /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO 5033500 /6" x 20 Spl. - 8" 2 /2" (.20 Wall) PTO 5043500-5 /6" Sq. 8" 2 /2" (.20 Wall) PTO 8075506 PTO 8075520 PTO 807552 PTO 8075527 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 27 Spl. Tube 2 /2" (.20 Wall) PTO 6024400 6' PTO 6034400 0' PTO 6044400 3' Tube Weld Yoke Stock Bore With Hub O.D. Turned PTO 809556 " Guard With Bearing Groove (Guard must rotate freely on yoke) PTO 705500 FITS TUBE SIZE 2 /2" (.20 Wall) *PTO 7045500 (with bore) 2 /2" (.20 Wall) *Bore through for telescoping. Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY PTO 8005522 3 /8" 5 /6" PTO 8005524 /2" 3 /8" PTO 8005526 5 /8" 3 /8" PTO 8005528 3 /4" 3 /8" PTO 8005532 2" /2" Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 924400 PTO 9023560 60" PTO 924400 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit)

PTO PARTS AND COMPONENTS 8-39 55 SERIES Yoke & Shaft Assembly Yoke, Tube & Sleeve Assembly DRIVELINE COMPONENTS SHAFT SIZE CENTERLINE TO END OF SHAFT DIMENSION PTO 0005548 5 /6" 32.75" PTO 0005560 5 /6" 44.88" PTO 005548 /6" x 20 Spl. 32.75" DIM "A" BORE DIM "B" BORE CENTERLINE TO END OF TUBE DIMENSION PTO 005548 5 /6" Sq. - 33.38" PTO 005560 5 /6" Sq. - 45.38" PTO 05548 - /6" x 20 Spl. 33.38" Drivelines Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48" or 60". SHAFT SIZE TRACTOR YOKE OVERALL COMPRESSED DIM "A" PTO 4005548 5 /6" 3 /8" x 6 Spl. Q.D. 48" PTO 4005560 5 /6" 3 /8" x 6 Spl. Q.D. 60" PTO 4045548 /6" x 20 Spl. 3 /8" x 6 Spl. Q.D. 48" Drivelines are furnished without Cross & Bearing Kit and Outboard Yokes. Select kit and Outboard Yokes as required. When Cross & Bearing Kit and Outboard Yokes are assembled, the overall compressed length of the driveline will be 48", 58" or 60". SHAFT SIZE OVERALL COMPRESSED DIM "A" PTO 405548 5 /6" Sq. 48" PTO 405560 5 /6" Sq. 60" PTO 4055548 /6" x 20 Spl. 48" PTO 4055558 /6" x 20 Spl. 58" TRACTOR YOKE IMPLEMENT YOKE PTO 4005537 PTO 4005546 3 /8" x 6 Spl. Safety Slide Lock 3 /4" x 20 Spl. Safety Slide Lock 3 /8" x 6 Spl. Safety Slide Lock 3 /8" Rd. w/ Keyway and (2) Set Screws OVERALL COMPRESSED DIM "A" APPLICATION SHAFT SIZE 37" All Purpose 5 /6" Sq. 46" All Purpose /6" x 20 Spl.

8-40 PTO PARTS AND COMPONENTS W SERIES DRIVELINE COMPONENTS Tube /4" Square O.D. FITS SHAFT PTO 600005 6' 5 /6" Sq. Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO 00072 PTO 000706 Quick Disconnect Repair Kit - Page 49 3 /8" x 2 Spl. 3 /8" x 6 Spl. Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) FITS TUBE SIZE PTO 7000700 5 /6" Sq. /4" Guard PTO 020706 3 /8" x 6 Spl. Cross & Bearing Kit (Pin & Block Style) Zerk Located in Block DIM "A" DIM "B" PTO 2000700 9 /6" /2" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 3000700 5 /6" Sq. Shaft Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 92570 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. Drivelines 5 /6" Square FITS TUBE PTO 400005 6' /4" Sq. Use 2 Series driveline for all "W" Series replacement drivelines. See 2 Series (Page 26) for drivelines.

PTO PARTS AND COMPONENTS 8-4 W SERIES - DOMESTIC DRIVELINE COMPONENTS Implement Yoke ROUND BORE with Keyway & Set Screw "A" BORE STANDARD KEYWAY PTO 800070 5 /8" 3 /6" PTO 800072 3 /4" 3 /6" PTO 800073 3 /6" 3 /6" PTO 800074 7 /8" 3 /6" PTO 800075 5 /6" /4" PTO 800076 " /4" PTO 800078 /8" /4" PTO 800079 3 /6" /4" PTO 8000720 /4" /4" Driveline TRACTOR YOKE IMPLEMENT YOKE OVERALL COMPRESSED "A" APPLICATION PTO 4000700 3 /8" x 6 Spring-Lok /4" Round /4" Keyway 48" Post Hole Digger

8-42 PTO PARTS AND COMPONENTS 0675 SERIES DRIVELINE COMPONENTS Tractor Yoke Spring-Lok Repair Kit - Page 49 PTO 000506 Quick Disconnect Repair Kit - Page 49 PTO 020506 3 /8" x 6 Spl. 3 /8" x 6 Spl. Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY PTO 800050 5 /8" 3 /6" PTO 800052 3 /4" 3 /6" Spline Bore With 2 /64" Pin Hole Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO 2000675 5 /6" 2 5 /6" Square Bore With Set Screw PTO 800506 3 /8" x 6 Spl. Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 3000500 3 /4" x 7 /8" Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 7000500 " x /8" PTO 804052 3 /4" PTO 804054 7 /8" PTO 804056 " Round Bore With Double Keyway & Set Screw DOUBLE KEYWAY PTO 806054 7 /8" 3 /6" x /4" PTO 806056 " 3 /6" x /4" PTO 806058 /8" /4" x 5 /6" PTO 8060520 /4" /4" x 5 /6"

PTO PARTS AND COMPONENTS 8-43 000 SERIES Tractor Yoke Quick Disconnect Repair Kit - Page 49 PTO 02006 3 /8" x 6 Spl. Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO 200000 5 /6" 2 9 /64" Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 300000 3 /4" x 7 /8" Rect. Tube Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 700000 " x /8" Implement Yoke Spline Bore With Set Screw DIM "B" CENTERLINE PTO 8003.90" x 3 Spl. 2 /2" (2.50) PTO 8008 /8" x 6 Spl. 2 /2" (2.50) Shear Pin DIM "B" CENTERLINE PINHOLE SIZE PTO 80205 5 /6" 2 /2" (2.50) /32" (.34) PTO 80206 " 2 /2" (2.50) /4" (.25) PTO 000059 " 2 /2" (2.50) 3 /8" (.38) PTO 802020 /4" 2 /2" (2.50) 5 /6" (.3) PTO 802024 /2" 2 /2" (2.50) 9 /32" (.28) PTO 000034 /2" 2 /2" (2.50) 7 /64" (.27) Implement Yoke Round Bore With Keyway & Set Screw KEYWAY DRIVELINE COMPONENTS DIM "B" CENTERLINE PTO 80000 5 /8" 3 /6" (.9) 2 /2" (2.50) PTO 000044 5 /8" 3 /6" (.9) /6" (.69) PTO 000045 3 /4" 3 /6" (.9) 2 /2" (2.50) PTO 000038 3 /4" 3 /6" (.9) /6" (.69) PTO 000056 3 /4" /4" (.25) 2 /2" (2.50) PTO 80003 3 /6" /4" (.25) 2 /2" (2.50) PTO 000039 3 /6" /4" (.25) /6" (.69) PTO 000057 7 /8" 3 /6" (.9) 2 /2" (2.50) PTO 000049 7 /8" /4" (.25) 2 /2" (2.50) PTO 000048 7 /8" /4" (.25) 2 /2" (2.50) PTO 000040 7 /8" /4" (.25) /6" (.69) PTO 80005 5 /6" /4" (.25) 2 /2" (2.50) PTO 80006 " 3 /6" (.9) 2 /2" (2.50) PTO 00005 " /4" (.25) 2 /2" (2.50) PTO 000033 " /4" (.25) 2 /2" (2.50) PTO 00004 " /4" (.25) /6" (.69) PTO 80007 /6" /4" (.25) 2 /2" (2.50) PTO 000053 /8" /4" (.25) 2 /2" (2.50) PTO 000052 /8" 5 /6" (.3) 2 /2" (2.50) PTO 80009 3 /6" 5 /6" (.3) 2 /2" (2.50) PTO 000058 /4" /4" (.25) 2 /2" (2.50) PTO 000055 /4" 5 /6" (.3) 2 /2" (2.50) PTO 000054 /4" 5 /6" (.3) 2 /2" (2.50) PTO 000060 3 /8" 5 /6" (.3) 2 /2" (2.50) PTO 800022 3 /8" 3 /8" 2 /2" (2.50) Square Bore With Set Screw DIM "B" CENTERLINE PTO 80402 3 /4" 2 /2" (2.50) PTO 000042 3 /4" /6" (.69) PTO 80404 7 /8" 2 /2" (2.50) PTO 000043 7 /8" /6" (.69) PTO 80406 " 2 /2" (2.50) PTO 80408 /8" 2 /2" (2.50) PTO 000037 /8" 2 /2" (2.50)

8-44 PTO PARTS AND COMPONENTS 000 SERIES Implement Yoke Square Bore With Pin Hole DIM "B" CENTERLINE PINHOLE SIZE PTO 000035 3 /4" 2 /2" (2.50) 5 /6" (.32) PTO 000036 " 2 /2" (2.50) 3 /8" (3.75) Round Bore Double Keyway & Set Screw DOUBLE KEYWAY DIM "B" CENTERLINE PTO 80602 3 /4" 3 /6" & /4" 2 /2" (2.50) PTO 80603 3 /6" 3 /6" & /4" 2 /2" (2.50) PTO 80604 7 /8" 3 /6" & /4" 2 /2" (2.50) PTO 80606 " 3 /6" & /4" 2 /2" (2.50) PTO 80608 /8" 3 /6" & /4" 2 /2" (2.50) PTO 00006 /8" /4" & 5 /6" 2 /2" (2.50) PTO 806020 /4" /4" & 5 /6" 2 /2" (2.50) PTO 80609 3 /6" /4" & 5 /6" 2 /2" (2.50) Hexagon Bore With Set Screw PTO 80504 7 /8" PTO 80508 /8" Slip Sleeve Yoke Square PTO 80802 3 /4" PTO 80804 7 /8" PTO 80806 " Round KEYWAY DIM "B" CENTERLINE PTO 8002 3 /4" 3 /6" 5 /2" (5.50) PTO 8004 7 /8" /4" 5 /2" (5.50) PTO 8003 3 /6" /4" 5 /2" (5.50) PTO 8006 " /4" 5 /2" (5.50) PTO 000007 " /4" 5 /2" (5.50) PTO 8008 /8" /4" 5 /2" (5.50) PTO 000062 /8" 5 /6" 5 /2" (5.50) PTO 80020 /4" /4" 5 /2" (5.50) PTO 00003 /4" 5 /6" 5 /2" (5.50) PTO 000066 /8" /4" 5 /2" (5.50) Hex Slip Sleeve Yoke PTO 804 7 /8" PTO 808 /8" Spline DRIVELINE COMPONENTS DIM "B" CENTERLINE PTO 8208 /8" x 0 Spl. 5 /2" (5.50) PTO 82020 /4" x 6 Spl. 5 /2" (5.50) DIM "B" CENTERLINE PTO 8302 3 /4" x 7 /8" 5 /2" (5.50) PTO 00004 7 /8" 5 /2" (5.50) PTO 00005 " 5 /2" (5.50) Guard Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 920600 PTO 9002560 60" PTO 920600 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes.

PTO PARTS AND COMPONENTS 8-45 800 SERIES Interchanges with Neapco Cross & Bearing Kit Snap Ring Located in Bushing DRIVELINE COMPONENTS VEHICULAR CROSS & BEARING KIT Interchanges with Spicer SPICER U-JOINT SERIES DIM "A" DIM "B" PTO 200030 30 /6" 3 7 /32" DIM "A" DIM "B" PTO 200875 " 3 /4" PTO 2000350 350 3 /6" 3 5 /8" PTO 200040 40 3 /6" 4 3 /6" FR SERIES Cross & Bearing Kit Snap Ring Located in Yoke 4 SERIES Interchanges with Howse Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO 200000 7 /8" 2 5 /6" DIM "A" DIM "B" PTO 20040 /8" 2 5 /8" 3 DR SERIES Cross & Bearing Kit Snap Ring Located in Yoke 35 SERIES Interchanges with Howse Cross & Bearing Kit Snap Ring Located in Bushing DIM "A" DIM "B" PTO 2000300 " 3 5 /6" DIM "A" DIM "B" PTO 200350 /4" 3 7 /32"

8-46 PTO PARTS AND COMPONENTS 2600 SERIES Interchanges with Neapco & Walterscheid 480 Tractor Yoke Quick Disconnect Repair Kit - Page 49 PTO 022606 PTO 022620 PTO 02262 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Tube 2 3 /4" (.09 Wall) DRIVELINE COMPONENTS PTO 6022600 6' Cross & Bearing Kit Snap Ring Located in Yoke DIM "A" DIM "B" PTO 2002600 3 /8" 4 3 /6" Tube Weld Yoke With Bearing Groove (Guards must rotate freely on the yoke) Shaft Weld Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 3002600 5 /6" Sq. PTO 702600 Implement Yoke Round Bore With Keyway & Set Screw FITS TUBE SIZE 2 3 /4" (.09 Wall) Shaft 5 /6" Square PTO 400002 6' PTO 40002 0' PTO 404002 3' STANDARD KEYWAY PTO 8002622 3 /8" 5 /6" PTO 8002624 /2" 3 /8" PTO 8002628 3 /4" 3 /8" Guard Slip Sleeve 5 /6" Square With Grease Groove FITS TUBE SIZE PTO 5002600 5" 2 3 /4" (.09 Wall) With Bearings (920-2600) OVERALL DRIVELINE PTO 9002648 48" Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing and retainer (See Page 0) 2) Guards must rotate freely on yokes.

PTO PARTS AND COMPONENTS 8-47 SHAFTING & TUBING DRIVELINE COMPONENTS Shafting Tubing SIZE PTO 400002 3 /4" Sq. 6' PTO 400004 7 /8" Sq. 6' PTO 400005 5 /6" Sq. 6' PTO 400006 " Sq. 6' PTO 400009 3 /6" Sq. 6' PTO 4000020 /4" Sq. 6' PTO 400002 5 /6" Sq. 6' PTO 40024 3 /4" x 7 /8" Rect. 6' PTO 40068 " x /8" Rect. 6' PTO 40009 3 /6" Sq. 0' PTO 40002 5 /6" Sq. 0' PTO 4024 3 /4" x 7 /8" Rect. 0' PTO 4068 " x /8" Rect. 0' PTO 402004 7 /8" Hex 6' PTO 402006 " Hex 6' PTO402008 /8" Hex 6' PTO 4020020 /4" Hex 6' PTO 404009 3 /6" Sq. 3' PTO 404002 5 /6" Sq. 3' PTO 40424 3 /4" x 7 /8" Rect. 3' PTO 40465H " x 5 Spl. (Induction Hardened) 3' PTO 40468 " x /8" Rect. 3' PTO 404220 5 /6" x 20 Spl. (Induction Hardened) 3' PTO 4042720 /6" x 20 Spl. (Induction Hardened) 3' SIZE PTO 600002 " Sq. 6' PTO 600005 /4" Sq. (.20 Wall) 6' PTO 600006 /4" Sq. (.09 Wall) 6' PTO 6000020 5 /8" Sq. 6' PTO 60068 3 /4" x 7 /8" Rect. 6' PTO 6002022 /4" x 3 /8" Rect. 6' PTO 6068 3 /4" x 7 /8" Rect. 0' PTO 602022 /4" x 3 /8" Rect. 0' PTO 6020600 /2" Rd. 6' PTO 602400 2" Rd. (.083 Wall) 6' PTO 6022600 2 3 /4" Rd. (.09 Wall) 6' PTO 6023500 2 /8" Rd. (.20 Wall) 6' PTO 602350 2 /8" Rd. (.083 Wall) 6' PTO 6024400 2 /2" Rd. (.20 Wall) 6' PTO 603400 2" Rd. (.083 Wall) 0' PTO 6033500 2 /8" Rd. (.20 Wall) 0' PTO 6034400 2 /2" Rd. (.20 Wall) 0' PTO 6040600 /2" Rd. 3' PTO 604400 2" Rd. (.083 Wall) 3' PTO 60468 3 /4" x 7 /8" Rect. 3' PTO 6042022 /4" x 3 /8" Rect. 3' PTO 6043500 2 /8" Rd. (.20 Wall) 3' PTO 6044400 2 /2" Rd. (.20 Wall) 3' Shock Absorbing Flexible Coupling Disc Spider 6" O.D. DESCRIPTION DESCRIPTION PTO 97020 Disc only w/ 5 /8" holes PTO 8006 3 /8" x 6 Spl. with 5 /8" bolt hole PTO 970208 Disc only w/ /2" holes PTO 80053 3 /8" x 6 Spl. with 2 /64" pinholes & 5 /8" bolt hole PTO 802097 3 /4" Rd. with 3 /8" keyway & 5 /8" bolt hole

8-48 PTO PARTS AND COMPONENTS NYLON BEARING REPAIR KIT DRIVELINE COMPONENTS (Kit includes nylon bearing and retainer) NOTE! Not all guard and bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a proper fit between nylon bearing raceway in yoke and guard. It is essential that the proper nylon bearing is identified and installed to insure proper performance and safety. To assist in ordering the proper nylon bearing, listed below are part numbers and dimensions for our standard aftermarket and OEM nylon bearings. DIM "A" YOKE RACEWAY O.D. NYLON BEARING I.D. DIM "B" YOKE RACEWAY WIDTH NYLON BEARING WIDTH DIM "C" NYLON BEARING O.D. PTO 920007 2 /8" (2.25") 3 /8" (.375") 2 3 /4" (2.75") PTO 9200069 3 /4" (.75") 3 /8" (.375") 2 3 /4" (2.75") PTO 9200085 2" (2.0") 3 /8"(.375") 2 3 /4" (2.75") PTO 920002 3 /8" (.375") /32" (.343") 2" (2.0") PTO 92004 5 /8" (.625") /32" (.343") 2 3 /4" (2.75") PTO 920065 2 /8" (2.25") 3 /8" (.375") 3 /4" (3.25") PTO 920095 3 /4" (.75") 3 /8" (.375") 2 /2" (2.50") PTO 9200254 5 /8" (.625") /32" (.343") 2 /4" (2.25") PTO 9200259 2" (2.0") 3 /8" (.375") 3 /4" (3.25") PTO 9200260 2 7 /32" (2.530") 33 /64" (.358") 2 49 /64" (2.770") PTO 9200600 3 /6" (.825") 9 /32" (.282") 2 3 /4" (2.75") PTO 920200 2 /6" (2.0625") /32" (.343") 2 3 /4" (2.75") PTO 9202600 2 7 /8" (2.875") /32" (.343") 3 9 /6" (3.5625") PTO 9203500 2 /6" (2.0625") /32"(.343") 2 3 /4" (2.75") PTO 9204400 2 5 /8" (2.625") 3 /8" (.375") 3 /4" (3.25") PTO 9204P5 2 /32" (.646") /32" (.358") 2 3 /4" (2.76") PTO 9204P6 25 /32" (.770") /32" (.358") 2 3 /4" (2.76") PTO 920507 2 /32" (2.02") /32" (.358") 2 3 /4" (2.76") PTO 9205084 2 5 /32" (2.46") /32"(.358") 2 3 /4" (2.76") PTO 9204N5 6 /64" (.947") 9 /32" (.29") 2 /4" (2.25") PTO 9204N6 2 /8" (2.25") 2 /64" (.34") 2 /2" (2.50") NOTE! All Series North American guards are provided without nylon bearings. To help assure the proper set of nylon bearings are installed, one nylon bearing set will be exactly the same (nylon bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will be dimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these nylon bearing kits.

PTO PARTS AND COMPONENTS 8-49 LOCKING DEVICE DRIVELINE COMPONENTS Safety Slide Lock An exclusive Weasler replacement component, the Safety Slide Lock* yoke is locked in place by two hardened pawls with compound radii that conform to the groove in the shaft for full contact. The device is particularly applicable where there is appreciable end thrust. Spring-Lok The collar is spring loaded for ease of installation and positive locking to tractor shaft. Quick Disconnect A smooth plunger eliminates sharp projections such as x-washers. Trails rather than leads rotation. LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO 3004000 PTO 3004020 PTO 300405 DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline Repair Kit for Weasler Auto-Lok and Safety Slide Lock 20 Spline Repair Kit for " x 5 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls. Spring-Lock PTO 300300 PTO 30035 DESCRIPTION Repair Kit for Weasler Spring-Lok, 6 Spline & 2 Spline " x 5 Spline Quick Disconnect PTO 3002006 PTO 3002806 PTO 300202 PTO 3002020 DESCRIPTION Repair Kit for Weasler and Rockwell 6 Spline Repair Kit for 3 /4" x 6 Spl. Weasler 2 Spline and Hex Quick Disconnect Weasler 20 Spline

8-50 PTO PARTS AND COMPONENTS COMPLETE UNIVERSAL JOINTS Round to Round SERIES NO. BORE A BORE A- WEIGHT LBS. PTO 93046 4P Round Round 2.26 PTO 93062 6N ¾ Round ¾ Round 2.56 PTO 93066 6N Round Round 3.3 Round bore yokes are furnished with standard keyway and setscrew. Round to Tube Weld SERIES NO. BORE A BORE A- WEIGHT LBS. PTO 90066 6N round x /8 Rect. 2.94 Round bore yokes are furnished with standard keyway and setscrew. COMBINE HEADER DRIVELINES Metric SERIES COMBINE HOOK-UP HEADER HOOK-UP OAL COMPRESSED FITS PTO 400763 2400 3 /8" x 2 Spline Slide Collar /8" Hex Clamp 3" Cutting Platform Series: 90, 600 & 900 Models: 65, 68, 620, 622, 625, 630, 98 & 920 Draper Platform Series: 90-25', 30', 36' Models: 606C, 608C & 62C (New) PTO 400766 2400 3 /8" x 2 Spline Slide Collar /8" Hex Clamp 6" 635 Flex Platform (2008 Models) PTO 4007633 2400 /8" Hex Slide Collar /8" Hex Clamp 33" Case-IH Combine Models: 420, 440, 460, 470, 480, 482, 620, 640, 644, 660, 666, 670, 680, 682, 688, 244, 266, 288, 2344, 2366, 2377, 2388 John Deere Combine Models: 253A, 453A, 454A, 653A, 654A, 655A, 853A, 854A North American SERIES COMBINE HOOK-UP HEADER HOOK-UP OAL COMPRESSED FITS PTO 40353 35 3 /8" x 2 Spline Slide Collar /8" Hex Clamp 3" Cutting Platform Series: 90, 600 & 900 Models: 65, 68, 620, 622, 625, 630, 98 & 920 Draper Platform Series: 90-25', 30', 36' Models: 606C, 608C & 62C (New) PTO 400356 35 3 /8" x 2 Spline Slide Collar /8" Hex Clamp 6" 635 Flex Platform (2008 Models)

8-5 PTO PARTS AND COMPONENTS COMPETITOR INTERCHANGEABILITY FM/TRW NEAPCO BONDIOLI & PAVESI AGDRIVE WALTERSCHEID WEASLER Series Kit 20425-02.4 AB AP00 200654 Series Kit 200 20430 200-00 AW0 AP0 200 0.0.00 200755 Series Kit 2 20426 2-022 2 2.4 AB2 AP220 200826 Series Kit 2200 20426 2200-022 AW20 AP220 2200 20.00.00 200826 Series Kit 3 20330 3-032 3 3.4 AB3 AP3 2008370 Series Kit I 20330 I -032 AW AP3 I.03.00 2008370 Series Kit 2300 2033 2300-042 AW2 AP42 2300 2.00.00 2008474 Series Kit 4 2033 4-042 4 4.4 AB4 AP42 2008474 Series Kit 5 20427 5 2-052 5 5.4 AB5 AP500 2006580 Series Kit 2400 20428 2400 2-242 AW35 AP35 2400 35.00.00 2007676 Series Kit 6 20429 6 3-062 6 6.4 AB6 AP622 2008692 Series Kit 2500 20434 2500 3-252 AW36 AP36 2500 36.00.00 2007989 Series Kit 7 20432 7 3-072 7 7.8 AB7N AP7N 2006794 Series Kit 8 2043 8 3-082 8 8.4 AB8 AP824 2006806 Series Kit 9 20433 9 3-092 9 9.8 AB9 AP900 Series Kit 0 20439 0 3-02 0 420

8-52 PTO PARTS AND COMPONENTS METRIC PTO DRIVELINES, COMPONENTS & ACCESSORIES NOW AVAILABLE - a complete line of European drivelines and accessories for replacement of complete drivelines in the field. Plus a complete inventory of reasonably priced replacement parts to fit existing Bondioli & Pavesi and Walterscheid drivelines. Bondioli & Pavesi Drivelines Covered Walterscheid Drivelines Covered B&P SERIES CROSS SIZE AG- DRIVE SERIES 540 RPM HP,000 RPM IN. LB. TORQUE 540 RPM,000 RPM WALTER- SCHEID SERIES CROSS SIZE AGDRIVE SERIES 540 RPM HP,000 RPM IN. LB. TORQUE 540 RPM,000 RPM AB 6 25,850,500 200 AW0 6 24,860,550 2 AB2 2 3 2,400,950 AW0S 27 42 3,40 2,600 3 AB3 30 47 3,450 2,900 2200 AW20 27 42 3,40 2,600 4 AB4 35 55 4,050 3,350 AW20S 6 24,860,530 5 AB5 47 74 5,500 4,600 2300 AW2 38 60 4,420 3,675 6 AB6 64 00 7,350 6,259 AW2S 53 83 6,50 5,30 7 AB7N 75 8 8,600 7,350 2400 AW35 53 83 6,50 5,30 8 AB8 95 50 0,950 9,300 AW35S 90 39 0,400 8,630 9 AB9 20 90 3,800,850 2500 AW36 20 90 3,800,850 Important Notice: These drivelines, accessories and replacement parts are of quality European engineering and manufactured by a recognized OEM supplier and are not an imported copy from east bloc or pacific rim countries. AW36S 98 45 6,580 3,800 AW26 07 66 2,390 0,30

PTO PARTS AND COMPONENTS 8-53 TRANSPARENCY IDENTIFICATION SYSTEM METRIC DRIVELINES & COMPONENTS For Metric Driveline Components The individual transparency cards will allow the user to easily identify driveline components. Cross and Bearing Kits may be identified by the bearing cap outside diameter and the width of the cross. Yokes may be identified by the hole in the ear and profile. Tubes and shafts may be identified by the end sections. How to use the Transparency Identification System:. Match the part to be replaced with the corresponding transparency card for identification. 2. Select the proper stock number for the replacement part. PTO 2008500

8-54 PTO PARTS AND COMPONENTS PART NUMBER EXPLANATION Each series has an exploded view for identification purposes. The drawing illustrates the components in the same sequence as an implement input driveline transmitting power from tractor to implement. Each component of the exploded view is identified by an eight-digit stock number to insure correct identification of each component. Example: For metric components the 02 prefix denotes a Quick Disconnect Tractor Yoke on the exploded view. METRIC DRIVELINES & COMPONENTS When ordering any component in the exploded view (for any series), be sure the part number begins with the appropriate three-digit prefix. The digit immediately following the dash (-) will be a 6, 7 or 8. A 6 indicates the item is interchangeable with Bondioli & Pavesi ONLY. A 7 indicates the item is interchangeable with Walterscheid ONLY. An 8 indicates the item is interchangeable with BOTH Bondioli & Pavesi AND Walterscheid. This interchangeability designation is used for all components EXCEPT roll pins, guards and guard bearings. The following chart lists the approximate size replacement for Metric Drivelines. These are not an exact interchange, and should be used as a general replacement guide only. Cross & Bearing Kit Cross Reference Chart for Metric Components CROSS & BEARING R-KIT CROSS & BEARING E-KIT INTERCHANGES WITH BONDIOLI & PAVESI SERIES PTO 200654 PTO 20654 N/A PTO 2006580 PTO 206580 5 N/A PTO 2006794 PTO 206794 7N N/A PTO 2006806 PTO 206806 8 N/A PTO 2006908 PTO 206908 9 N/A PTO 2007004 PTO 207004 N/A 2600 PTO 200755 PTO 20755 N/A 200 PTO 2007676 PTO 207676 N/A 2400 PTO 2007890 N/A II N/A PTO 2007989 PTO 207989 N/A 2500 PTO 200826 PTO 20826 2 2200 PTO 2008370 PTO 208370 3 I PTO 2008474 PTO 208474 4 2300 PTO 2008692 PTO 208692 6 220 PTO 2008706 PTO 208706 7 (Old Series) 230 PTO 2007276 PTO 207276 N/A 2280 PTO 200749 PTO 20749 N/A 2380 PTO 2007694 PTO 207694 N/A 2480 PTO 2007906 PTO 207906 N/A 2580 Driveline Replacement Chart INTERCHANGES WITH WALTERSCHEID SERIES WEASLER SERIES REPLACEMENT FOR: WEASLER SERIES REPLACEMENT FOR: 6 Bondioli & Pavesi & 2 Series Walterscheid 200 & 2200 Series 2 Bondioli & Pavesi 3 Series Walterscheid I Series 4 Bondioli & Pavesi 4 Series Walterscheid 2300 Series 35 Bondioli & Pavesi 5 Series Walterscheid 220 & 2400 Series 44 Bondioli & Pavesi 6 & 7 Series Walterscheid II Series 55 Bondioli & Pavesi 8 & 9 Series Walterscheid 2500 & 2600 Series

PTO PARTS AND COMPONENTS 8-55 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 0606 PTO 062 Quick Disconnect Repair Kit - Page 06 PTO 0268 PTO 02606 PTO 0262 3 /8" x 6 Spl. 3 /8" x 2 Spl. /8" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 200654 22.0 7 /8" (.87) 54.0 2 /8" (2.3) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 300626 27.5 5 /64" (.08) Inner Tube 26.5 (3.4 Wall) mm.024" (.38" Wall) m inches PTO 400626.5 59 /6" (59.06) PTO 40626 3.0 8 /8" (8.) PTO 404626.0 39 3 /8" (39.37) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 20654 22.0 7 /8" (.87) 54.0 2 /8" (2.3) DIM "A" DIM "B" mm inches mm inches PTO 5080850 8.0 5 /6" (.3) 50.0 3 /32" (.97)

8-56 PTO PARTS AND COMPONENTS SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 32.5 (2.6 Wall) mm.299" (.02" Wall) m inches PTO 600633.5 59 /6" (59.06) PTO 60633 3.0 8 /8" (8.) PTO 604633.0 39 3 /8" (39.37) Implement Yoke Shear Pin With Pin Hole mm DIM "A" inches PTO 80260 3.75 /4" (.25) PTO AE00022 22.22 7 /8" PTO AE00028 28.57 /8" Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Guard mm inches PTO 700633 33.0 5 /6" (.30) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches AE 00322 22.22 7 /8" (.875) 0.0 3 /6" (.875) PTO 800608 25.4 " (.0) 6.35 /4" (.25) PTO 80060 3.75 /4" (.25) 6.35 /4" (.25) PTO 800630 30.0 3 /6" (.8) 0.0 25 /64" (.39) Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 965029 PTO 9002560 60" PTO 965029 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 400627 27" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400635 35" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400637 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 404648 48" 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

PTO PARTS AND COMPONENTS 8-57 SERIES Clamp Yokes Round Bore SIZE (MM) SERIES AB D C B L L D H PTO AP00520 20 6 22.8 92 6 46 63 PTO AP00530 30 8 33.3 92 6 46 63 SIZE PTO AE0053 ¼" ¼" ( 5 /6") SERIES AB D C B L L D H 35. (36.72) 92 6 46 63

8-58 PTO PARTS AND COMPONENTS 2 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB2 Tractor Yoke Safety Slide Lock Repair Kit - Page 88 PTO 08206 PTO 0822 Quick Disconnect Repair Kit - Page 88 PTO 02828 PTO 028206 PTO 02822 3 /8" x 6 Spl. 3 /8" x 2 Spl. /8" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 200826 23.8 5 /6" (.94) 6.2 2 3 /32" (2.4) Extended Lubrication Cross & Bearing Kit (E-Kit) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 2200 Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006229 29.8 /64" (.7) Inner Tube 29.0 (4. Wall) mm.42" (.34" Wall) m inches PTO 4006229.5 59 /6" (59.06) PTO 406229 3.0 8 /8" (8.) PTO 4046229.0 39 3 /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 20826 23.8 5 /6" (.94) 6.2 2 3 /32" (2.4) DIM "A" DIM "B" mm inches mm inches PTO 5080860 8.0 5 /6" (.3) 60.0 2 23 /64" (2.36)

PTO PARTS AND COMPONENTS 8-59 2 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 36.0 (3.2 Wall) mm.47" (.34" Wall) m inches PTO 6006236.5 59 /6" (59.06) PTO 606236 3.0 8 /8" (8.) PTO 6046236.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006236 36.8 29 /64" (.45) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO AE22039 9.05 ¾" - - PTO 8008225 25.0 63 /64" (.98) 8.0 5 /6" (.3) PTO 8008208 25.0 " (.0) 8.0 /4" (.25) PTO 800828 28.6 /8" (.3) 8.0 /4" (.25) PTO 8008230 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800820 3.8 /4" (.25) 6.4 /4" (.25) PTO 80082 34.9 3 /8" (.38) 8.0 5 /6" (.3) Shear Pin Yoke With Pin Hole mm inches PTO 8028220 3.8 /4" Rd. (.25) PTO 8028222 34.9 3 /8" Rd. (.38) PTO AE22009 9.05 ¾" PTO AE220025 25.40 " PTO AP220025 25.0 - PTO AP220030 30.0 - Guard Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 962502 PTO 9002560 60" PTO 962502 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006247 47" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400625 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006252 52" 3 /8" x 6 Spl. QD /4" Rd. w/pinhole PTO 4046248 48" 3 /8" x 6 Spl. QD * PTO 4046260 60" 3 /8" x 6 Spl. QD * PTO 406233 33" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 4206252 52" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/radial Pin Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

8-60 PTO PARTS AND COMPONENTS 2 SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Round Bore PTO AE220522 SIZE SERIES AB2/AW20 D C B L L D H 22.22 ( 7 /8") 3 /6" 24.75 98 20 48 70 SIZE SERIES AB2/AW20 D Spline L L D H PTO AP220538 3 /8" 6 98 20 48 70 SIZE (MM) SERIES AB2/AW20 D C B L L D H PTO AP220525 25 8 28.3 98 20 48 70 PTO AP220530 30 8 33.3 98 20 48 70

PTO PARTS AND COMPONENTS 8-6 3 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB3 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 08306 PTO 0832 Quick Disconnect Repair Kit - Page 06 PTO 028306 PTO 02832 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2008370 27.0 /6" (.06) 70.0 2 3 /4" (2.76) Extended Lubrication Cross & Bearing Kit (E-Kit) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid I Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006336 36.8 29 /64" (.45) Inner Tube 36.0 (3.2 Wall) mm.47" (.34" Wall) m inches PTO 6006236.5 59 /6" (59.06) PTO 606236 3.0 8 /8" (8.) PTO 6046236.0 39 3 /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 208370 27.0 /6" (.06) 70.0 2 3 /4" (2.76) DIM "A" DIM "B" mm inches mm inches PTO 5080860 8.0 5 /6" (.3) 60.0 2 23 /64" (2.36)

8-62 PTO PARTS AND COMPONENTS 3 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 43.5 (3.4 Wall) mm.693" (.8" Wall) m inches PTO 6006343.5 59 /6" (59.06) PTO 606343 3.0 8 /8" (8.) PTO 6046343.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006343 44.0 47 /64" (.73) Implement Yoke Shear Pin With Pin Hole Guard mm inches PTO AE3025 25.40 " PTO AP3025 25.0 Bore PTO 802830 3.8 /4" (.25) PTO 8028325 25.0 63 /64" (.98) PTO 8028330 30.0 3 /6" (.8) PTO 8028335 35.0 - Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO 8008325 25.0 63 /64" (.98) 8.0 5 /6" (.3) PTO AE3325 25.40 " - - PTO 8008330 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800830 3.8 /4" (.25) 6.4 /4" (.25) PTO 80083 34.9 3 /8" (.38) 8.0 5 /6" (.3) Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 962534 PTO 9002560 60" PTO 962534 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO 3005000 (4 per kit) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006340 40" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4046348 48" 3 /8" x 6 Spl. QD * PTO 4046360 60" 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

PTO PARTS AND COMPONENTS 8-63 3 SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Round Bore SIZE (MM) SERIES AB3/AW D C B L L D H PTO AP3525 25 8 28.3 02 20 50 80 PTO AP3530 30 8 33.3 02 20 50 80 PTO AP3535 35 0 38.3 02 20 50 80 SIZE (MM) SERIES AB3/AW D SPLINE L L D H PTO AP352 3 /8" 2 02 20 50 80

8-64 PTO PARTS AND COMPONENTS 4 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB4 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 08406 PTO 0842 Quick Disconnect Repair Kit - Page 06 PTO 028406 PTO 02848 PTO 02842 PTO AP4220 PTO AP4234 Ball Shear PTO 048406 PTO 048420 PTO 04842 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. /8" Hex 3 /8" x 2 Spl. ¾" x 20 Spl. ¾" x 6 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2008474 27.0 /6" (.06) 74.6 2 5 /6" (2.94) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO 208474 27.0 /6" (.06) 74.6 2 5 /6" (2.94) Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 2300 Series. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006436 36.8 29 /64" (.45) Inner Tube 36.0 (3.9 Wall) mm.47" (.57" Wall) m inches PTO 4006436.5 59 /6" (59.06) PTO 406436 3.0 8 /8" (8.) PTO 4046436.0 39 3 /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO 5080860 8.0 5 /6" (.3) 60.0 2 3 /8" (2.36) Outer Tube 43.5 (3.4 Wall) mm.73" (.38" Wall) m inches PTO 6006343.5 59 /6" (59.06) PTO 606343 3.0 8 /8" (8.) PTO 6046343.0 39 3 /8" (39.37)

PTO PARTS AND COMPONENTS 8-65 4 SERIES Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006443 44.0 47 /64" (.73) Implement Yoke Round Bore With Keyway & Set Screw Implement Yoke Hex Bore Guard mm inches PTO 805848 28.9 9 /64" (.4) Clamp Yoke PTO 8078406 PTO 8078420 3 /8" x 6 Spl. /4" Rd. METRIC DRIVELINES & COMPONENTS DIM "A" STANDARD KEYWAY mm inches mm inches PTO 8008430 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800840 3.8 /4" (.25) 6.4 /4" (.25) PTO 80084 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8008424 38. /2" (.50) 9.5 3 /8" (.38) PTO 8008435 35.0 3 /8" (.38) 0.0 25 /64" (.39) Shear Pin With Pin Hole mm inches PTO AE42028 28.57 /8" (.25) PTO 802840 3.8 /4" (.25) PTO 8028430 30.0 3 /6" (.8) PTO 8028435 35.0 3 /8" (.38) Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 962534 PTO 9002560 60" PTO 962534 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Round Bore SIZE SERIES AB4/AW2 D C B L L D H PTO AP42535 3 /8" (34.92 mm) 5 /6" 39.9 07 20 50 84 PTO AE42528 /8" (28.57 mm) ¼" 3.9 07 20 50 84

8-66 PTO PARTS AND COMPONENTS 4 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006424 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 4006430 30" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO 4006432 32" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006436 36" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006437 37" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO 4006438 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006442 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006446 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006448 48" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400645 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006453 53" 3 /8" x 6 Spl. QD /4" Rd. w/pinhole PTO 4006455 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4046448 48" 3 /8" x 6 Spl. QD * PTO 4046460 60" 3 /8" x 6 Spl. QD * PTO 406436 36" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406438 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 4206454 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/radial Pin Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

PTO PARTS AND COMPONENTS 8-67 5 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB5 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 06506 PTO 0652 Quick Disconnect Repair Kit - Page 06 PTO 026506 PTO 026520 PTO 02652 PTO AP50034 Ball Shear PTO 046506 PTO 046520 PTO 04652 3 /8" x 6 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2006580 30.2 3 /6" (.9) 79.4 3 /8" (3.3) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO 206580 30.2 3 /6" (.9) 79.4 3 /8" (3.3) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006545 45.2 25 /32" (.78) Inner Tube 45.0 (3.9 Wall) mm.77" (.5" Wall) m inches PTO 4006545.5 59 /6" (59.06) PTO 406545 3.0 8 /8" (8.) PTO 4046545.0 39 3 /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO 508075 0.0 25 /64" (.394) 75.0 2 6 /64" (2.95) Outer Tube 5.5 (3.0 Wall) mm 2.03" (.2" Wall) m inches PTO 6006552.5 59 /6" (59.06) PTO 606552 3.0 8 /8" (8.) PTO 6046552.0 39 3 /8" (39.37)

8-68 PTO PARTS AND COMPONENTS 5 SERIES METRIC DRIVELINES & COMPONENTS Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006552 5.7 2 3 /64" (2.04) Implement Yoke Clamp Yoke PTO 807652 3 /8" x 2 Spl. (.38) Guard Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO AP500330 30.0 - - - PTO 800650 3.8 /4" (.25) 6.4 /4" (.25) PTO 80065 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8006522 35.0 3 /8" (.38) 3.0 33 /64" (.5) PTO 8006524 38. /2" (.50) 9.5 3 /8" (.38) PTO 8006535 35.0 3 /8" (.378) 8.0 5 /6" (.3) Shear Pin With Pin Hole mm inches PTO 8026535 34.9 3 /8" (.38) Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 963505 PTO 9023560 60" PTO 963505 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Round Bore SIZE D C B PTO AP500530 30 8 33.3

PTO PARTS AND COMPONENTS 8-69 5 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006524 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 4006542 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006543 43" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006546 46" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO 400655 5" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO 4006555 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 406524 48" 3 /8" x 2 Spl. QD /2" Rd. PTO 406536 36" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 406542 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4046548 48" 3 /8" x 6 Spl. QD * PTO 4046560 60" 3 /8" x 6 Spl. QD * PTO 406546 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 4306538 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/overrunning Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

8-70 PTO PARTS AND COMPONENTS 6 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB6 Cross & Bearing Kit and Outboard Yokes interchange with Walterscheid 220 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 08606 PTO 08620 PTO 0862 PTO 028606 PTO 02862 PTO 02868 PTO 028620 PTO AP62234 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Quick Disconnect Repair Kit - Page 06 Ball Shear PTO 048606 PTO 048620 3 /8" x 6 Spl. 3 /8" x 2 Spl. /8" x Hex 3 /4" x 20 Spl. ¾" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO 04862 3 /8" x 2 Spl. Auto-Lok Repair Kit - Page 06 PTO 08606 Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2008692 30.2 3 /6" (.9) 92.0 3 5 /8" (3.62) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke 3 /8" x 6 Spl. DIM "A" DIM "B" mm inches mm inches PTO 208692 30.2 3 /6" (.9) 92.0 3 5 /8" (3.62) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006645 45.2 25 /32" (.78) Inner Tube 45.0 (3.9 Wall) mm.77" (.54" Wall) m inches PTO 4006545.5 59 /6" (59.06) PTO 406545 3.0 8 /8" (8.) PTO 4046545.0 39 3 /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO 508080 0.0 25 /64" (.39) 80.0 3 5 /32" (3.5) Outer Tube 54.0 (4.5 Wall) mm 2.3" (.8" Wall) m inches PTO 6006654.5 59 /6" (59.06) PTO 606654 3.0 8 /8" (8.) PTO 6046654.0 39 3 /8" (39.37)

PTO PARTS AND COMPONENTS 8-7 6 SERIES METRIC DRIVELINES & COMPONENTS Outer Profile Yoke Implement Yoke With Bearing Groove (Guard must rotate freely on yoke) Hex Bore mm inches PTO 7006654 54.2 2 /8" (2.3) PTO 805868 9 /64" Hex (.4), 28.9 mm Clamp Yoke Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO 800860 3.8 /4" (.25) 6.4 /4" (.25) PTO 80086 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8008624 38. /2" (.50) 9.5 3 /8" (.38) PTO 8008628 44.5 3 /4" (.75) 9.5 3 /8" (.38) PTO 8008635 35.0 3 /8" (.38) 0.0 25 /64" (.39) PTO 8008640 40.0 37 /64" (.57) 2.0 5 /32" (.47) PTO 8078606 PTO 8078620 PTO 807862 PTO AE622528 PTO AE62253 PTO AE622535 Guard 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. /8" Rd & Kw ¼" Rd & Kw 3 /8" Rd & Kw PTO AE62234 4.27 ⅝" (.625) - - Shear Pin With Pin Hole mm inches PTO 80286 34.9 3 /8" (.38) PTO 8028620 3.8 /4" (.25) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 963567 PTO 9023560 60" PTO 963567 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit) Clamp Yokes Round Bore SIZE D C B PTO AP622330 30 2 43.3 PTO AP622340 40 2 43.3 PTO AP622530 30 8 33.3 *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

8-72 PTO PARTS AND COMPONENTS 6 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006624 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 4006628 48" 3 /8" x 6 Spl. QD 3 /4" Rd. PTO 4006637 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006642 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006644 44" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006652 52" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006655 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006657 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 406624 48" 3 /8" x 2 Spl. QD /2" Rd. PTO 406666 66" 3 /8" x 2 Spl. QD /2" Rd. PTO 4046648 48" 3 /8" x 6 Spl. QD * PTO 4046660 60" 3 /8" x 6 Spl. QD * PTO 4066644 44" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO 406654 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406660 60" 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO 40666 6" 3 /4" x 20 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO 4306639 39" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/overrunning Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

PTO PARTS AND COMPONENTS 8-73 7N SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB7N Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 06706 PTO 06720 PTO 0672 Quick Disconnect Repair Kit - Page 06 PTO 026706 PTO 026720 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 206794 34.9 3 /8" (.37) 94.0 3 45 /64" (3.70) AB7* DIM "A" DIM "B" mm inches mm inches PTO 2008706 30.2 3 /6" (.9) 06.5 4 3 /6" (4.9) PTO 208706 30.2 3 /6" (.9) 06.5 4 3 /6" (4.9) *Old Bondioli & Pavesi 7 Series is interchangeable with Walterscheid 230 Series. Original part identification begins with 23. PTO 02672 PTO 026728 Ball Shear PTO 046706 PTO 04672 3 /8" x 2 Spl. 3 /4" x 6 Spl. 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006745 45.2 25 /32" (.78) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2006794 34.9 3 /8" (.37) 94.0 3 45 /64" (3.70) Inner Tube 45.0 (5.4 Wall) mm.77" (.2" Wall) m inches PTO 4006745.5 59 /6" (59.06) PTO 406745 3.0 8 /8" (8.) PTO 4046745.0 39 3 /8" (39.37)

8-74 PTO PARTS AND COMPONENTS 7N SERIES METRIC DRIVELINES & COMPONENTS Roll Pin Outer Tube 54.0 (4.5 Wall) mm 2.3" (.8" Wall) DIM "A" DIM "B" mm inches mm inches PTO 508080 0.0 3 /32" (.39) 80.0 3 5 /32" (3.5) Implement Yoke Round Bore With Keyway & Set Screw DIM "A" STANDARD KEYWAY mm inches mm inches PTO 8006722 35.0 3 /8" (.38) 8.0 5 /6" (.3) PTO 8006728 44.5 3 /4" (.75) 9.5 3 /8" (.38) PTO 8006740 40.0 37 /64" (.57) 2.7 /2" (.50) Guard m inches PTO 6006654.5 59 /6" (59.06) PTO 606654 3.0 8 /8" (8.) PTO 6046654.0 39 3 /8" (39.37) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006754 54.2 2 /8" (2.3) PTO 9023548 48" PTO 963567 PTO 9023560 60" PTO 963567 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit) Clamp Yokes SIZE D C B D SIZE SPLINE PTO AP7N535 35 0 38.3 PTO AP7N538 3 /8" 6

PTO PARTS AND COMPONENTS 8-75 7N SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006748 48" 3 /8" x 6 Spl. QD 3 /4" Rd. PTO 4046748 48" 3 /8" x 6 Spl. QD * PTO 4046760 60" 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. For a selection of 3 point hitch parts, see Section 22 of this catalogue.

8-76 PTO PARTS AND COMPONENTS 8 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB8 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 06806 PTO 06820 PTO 0682 Quick Disconnect Repair Kit - Page 06 PTO 026806 PTO 026820 PTO 02682 PTO 026828 Ball Shear PTO 046806 PTO 046820 PTO 04682 Auto-Lok Repair Kit - Page 88 PTO 06806 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. Cross & Bearing Kit (R-Kit) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 3006845 (Old Series 8) mm inches 45.2 25 /32" (.78) PTO 3006854 54.2 2 /8" (2.3) Inner Tube 54.0 (4.5 Wall) mm 2.3" (.77" Wall) DIM "A" m DIM "B" mm inches mm inches PTO 206806 34.9 3 /8" (.38) 06.5 4 3 /6" (4.9) inches PTO 6006854.5 59 /6" (59.06) PTO 606854 3.0 8 /8" (8.) PTO 6046854.0 39 3 /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2006806 34.9 3 /8" (.38) 06.5 4 3 /6" (4.9) DIM "A" DIM "B" mm inches mm inches PTO 5080880 8.0 5 /6" (.3) 80.0 3 5 /32" (3.5) PTO 508280 2.0 5 /32" (.47) 80.0 3 5 /32" (3.5)

PTO PARTS AND COMPONENTS 8-77 8 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 63.0 (4. Wall) mm 2.48" (.6" Wall) m inches PTO 6006863.5 59 /6" (59.06) PTO 606863 3.0 8 /8" (8.) PTO 6046863.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Implement Yoke Clamp Yoke PTO 8076806 PTO 8076820 PTO 807682 PTO AP824534 PTO 509080455 Guard 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. ¾" x 6 Spl. (Bondioli) mm inches PTO 7006863 63.0 2 3 /64" (2.48) Implement Yoke Round Bore With Keyway & Set Screw Spline Bore With Pinhole PTO 806806 3 /8" x 6 Spl. DIM "A" STANDARD KEYWAY mm inches mm inches PTO 8006822 35.0 3 /8" (.38) 8.0 5 /6" (.3) PTO 8006824 38. /2" (.50) 8.0 5 /6" (.3) PTO 8006828 44.5 3 /4" (.75) 9.5 3 /8" (.38) PTO 8006832 50.8 2" (2.00) 2.7 /2" (.50) PTO AP824340 40 - - - PTO AE82434 4.27 5 /8" (.625) - - Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9004548 48" PTO 964589 PTO 9004560 60" PTO 964589 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Clamp Yokes Hub Yokes With Spring Pin Hole SIZE D C B PTO AP824535 35 0 38.3 SIZE D F PTO AP824040 40 3

8-78 PTO PARTS AND COMPONENTS 8 SERIES METRIC DRIVELINES & COMPONENTS Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006828 57" 3 /8" x 6 Spl. QD 3 /4" Rd. PTO 4006846 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006857 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4046848 48" 3 /8" x 6 Spl. QD * PTO 4046860 60" 3 /8" x 6 Spl. QD * PTO 4066846 46" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. For a wide selection of combine repair parts, visit Section 6.

PTO PARTS AND COMPONENTS 8-79 9 SERIES Interchanges with Bondioli & Pavesi METRIC DRIVELINES & COMPONENTS AB9 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 06906 PTO 06920 PTO 0692 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3006954 54.2 2 /8" (2.3) Inner Profile Tube PTO 026906 PTO 026920 PTO 02692 PTO AP90034 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. 54.0 (4.9 Wall) mm 2.3" (.9" Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO 4006954.5 59 /6" (59.06) PTO 406954 3.0 8 /8" (8.) PTO 4046954.0 39 3 /8" (39.37) DIM "A" DIM "B" mm inches mm inches PTO 2006908 4.0 39 /64" (.6) 08 4 /4" (4.25) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 206908 4.0 39 /64" (.6) 08 4 /4" (4.25) DIM "A" DIM "B" mm inches mm inches PTO 508080 0.0 25 /64" (.39) 80.0 3 5 /32" (3.5) PTO 508280 2.0 5 /32" (.47) 80.0 3 5 /32" (3.5)

8-80 PTO PARTS AND COMPONENTS 9 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube Guard 63.0 (4. Wall) mm 2.48" (.6" Wall) m inches PTO 6006863.5 59 /6" (59.06) PTO 606863 3.0 8 /8" (8.) PTO 6046863.0 39 3 /8" (39.37) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7006963 63.0 2 3 /64" (2.48) Implement Yoke Round Bore With Keyway & Set Screw PTO 9004548 48" PTO 964589 PTO 9004560 60" PTO 964589 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit) STANDARD KEYWAY PTO 8006922 3 /8" (.38) 5 /6" (.3) PTO 8006924 /2" (.50) 3 /8" (.38) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4046948 48" 3 /8" x 6 Spl. QD * PTO 4046960 60" 3 /8" x 6 Spl. QD * *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required.

PTO PARTS AND COMPONENTS 8-8 0 SERIES - METRIC DRIVELINE COMPONENTS INTERCHANGES WITH BONDIOLI & PAVESI Tractor Yoke QUICK DISCONNECT DIM. A BORE PTO 5720035 3 /8 x 6 spline PTO 5720045 3 /4 x 6 spline PTO 5720385 3 /4 x 20 spline PTO 5720375 3 /8 x 2 spline Cross & Bearing Kit Snap Ring Located in Yoke Roll Pin DIM. A DIM. B PTO 508280 2 mm 80 mm Outer Tube 63.0 mm (4.0 wall) DIM. A BORE DIM. B BORE PTO 420 4 mm 8 mm PTO 255500 500 mm Inner Profile Yoke Outer Profile Yoke With Bearing Groove PTO 20406852 DIM. A BORE 54 mm PTO 2040685 DIM. A BORE 66 mm Inner Tube 54.0 mm (6.0 wall) Plastic Guard Without Bearings PTO 254500 500 mm OVERALL DRIVELINE BEARINGS PTO 9004548 20 mm (48 ) CALL

8-82 PTO PARTS AND COMPONENTS 0 SERIES - METRIC DRIVELINE COMPONENTS Implement Yoke Clamp Yoke ROUND BORE With Keyway & Pin Hole DIM A BORE PIN HOLE SIZE PTO 20675 /2 3 /8 PTO 20885 3 /4 3 /8 PTO 206752 5 /6 /2 PTO 206753 2 /2 ROUND BORE With Keyway & Set Screw PTO 50900455 PTO 50903853 DESCRIPTION 3 /4 x 6 spline ¾" x 20 spline BORE STD. KEYWAY PTO 220875 3 /8 5 /6 SHEAVES!!! Westward Parts has available a full line of both QD and taper lok style sheaves. Contact your nearest branch for price & availability.

PTO PARTS AND COMPONENTS 8-83 200/00 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW0 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 0706 PTO 072 3 /8" x 6 Spl. 3 /8" x 2 Spl. mm inches Quick Disconnect Repair Kit - Page 06 PTO 02706 PTO 0272 3 /8" x 6 Spl. 3 /8" x 2 Spl. PTO 300723 23.8 5 /6" (.94) Inner Tube (Solid) 23.5 mm.93" Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches DIM "A" DIM "B" mm inches mm inches PTO 400723.5 59 /6" (59.06) PTO 40723 3.0 8 /8" (8.) PTO 404723.0 39 3 /8" (39.37) PTO 200755 22.0 7 /8" (.87) 55.2 2 /64" (2.7) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches PTO 5080850 8.0 5 /6" (.3) 50.0 3 /32" (.97) PTO 20755 22.0 7 /8" (.87) 55.2 2 /64" (2.7)

8-84 PTO PARTS AND COMPONENTS 200/00 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 30.0 (2.9 Wall) mm 3 /6" (.9" Wall) Implement Yoke Shear Pin With Pin Hole m inches PTO 600730.5 59 /6" (59.06) PTO 60730 3.0 8 /8" (8.) PTO 604730.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 802708 25.4 " (.0) PTO 80270 3.8 /4" (.25) PTO 802725 25.0 63 /64" (.98) PTO 802730 30.0 3 /6" (.8) PTO AE009 9.05 ¾" (.75) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO 700730 30.0 3 /6" (.8) STANDARD KEYWAY mm inches mm inches PTO 800725 25.0 63 /64" (.98) 8.0 5 /6" (.3) PTO 800730 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO AE0328 28.57 /8" (.25) 8.0 5 /6" (.3) Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 965005 PTO 9002560 60" PTO 965005 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO 3005000 (4 per kit)

PTO PARTS AND COMPONENTS 8-85 2200/200 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW20 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 2 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 08206 PTO 0822 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3007234 34.5 23 /64" (.36) PTO 028206 PTO 02828 PTO 02822 3 /8" x 6 Spl. /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO 4007234.5 59 /6" (59.06) PTO 407234 3.0 8 /8" (8.) PTO 4047234.0 39 3 /8" (39.37) DIM "A" DIM "B" mm inches mm inches 5 PTO 200826 23.8 /6" (.94) 6.2 2 3 /32" (2.4) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches 25 PTO 508060 0.0 /64" (.39) 60.0 2 23 /64" (2.36) PTO 20826 23.8 5 /6" (.94) 6.2 2 3 /32" (2.4)

8-86 PTO PARTS AND COMPONENTS 2200/200 SERIES METRIC DRIVELINES & COMPONENTS Clamp Yokes Profile Yokes Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) With Bearing Groove (Guard must rotate freely on yoke) inches m inches PTO 600724.5 59 /6" (59.06) PTO 60724 3.0 8 /8" (8.) PTO 604724.0 39 3 /8" (39.37) Outer Profile Yoke D mm SIZE PTO AE0525 " 25.4mm ¼" 28.70 PTO AE053 ¼" 3.75mm ¼"( 5 /6") 35. C B SIZE D B F PTO AP20223 23.5 47 8 PTO AP20230 30.0 47 8 Implement Yoke Shear Pin mm inches PTO 8028220 (with 3 /8" Pinhole) 3.8 /4" (.25) PTO 8028222 (with /2" Pinhole) 35.0 3 /8" (.38) PTO 8028225 (with 5 /6" Pinhole) 25.0 63 /64" (.98) PTO 8028230 (with 25 /64" Pinhole) 30.0 3 /6" (.8) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO 700724 4.3 5 /8" (.63) STANDARD KEYWAY mm inches mm inches PTO 8008225 25.0 63 /64" (.98) 8.0 5 /6" (.3) PTO 8008208 25.4 " (.0) 6.4 /4" (.25) PTO 8008230 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800820 3.8 /4" (.25) 6.4 /4" (.25) PTO 80082 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 800828 28.6 /8" (.3) 6.4 /4" (.25) PTO 8008220 3.8 /4" (.25) 8.0 5 /6" (.3) Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 96025 PTO 9002560 60" PTO 96025 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

PTO PARTS AND COMPONENTS 8-87 I SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 3 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 08306 PTO 0832 Quick Disconnect Repair Kit - Page 06 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3007334 34.5 23 /64" (.36) PTO 028306 PTO 02832 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke m inches PTO 4007234.5 59 /6" (59.06) PTO 407234 3.0 8 /8" (8.) DIM "A" DIM "B" mm inches mm inches PTO 2008370 27.0 /6" (.06) 70.0 2 3 /4" (2.76) PTO 4047234.0 39 3 /8" (39.37) Roll Pin Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches 25 PTO 508065 0.0 /64" (.39) 65.0 2 9 /6" (2.56) PTO 208370 27.0 /6" (.06) 70.0 2 3 /4" (2.76)

8-88 PTO PARTS AND COMPONENTS I SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) Implement Yoke Shear Pin With Pin Hole m inches PTO 600724.5 59 /6" (59.06) PTO 60724 3.0 8 /8" (8.) PTO 604724.0 39 3 /8" (39.37) mm inches PTO 802830 3.8 /4" (.25) PTO 8028325 25.0 63 /64" (.98) PTO 8028330 30.0 3 /6" (.8) PTO 8028335 35.0 3 /8" (.38) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Guard Implement Yoke Round Bore With Keyway & Set Screw mm inches PTO 700734 4.3 5 /8" (.63) STANDARD KEYWAY mm inches mm inches PTO 8008325 25.0 63 /64" (.98) 8.0 5 /6" (.3) PTO 8008330 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800830 3.8 /4" (.25)) 6.4 /4" (.25) PTO 80083 34.9 3 /8" (.37) 8.0 5 /6" (.3) Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9002548 48" PTO 96025 PTO 9002560 60" PTO 96025 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

PTO PARTS AND COMPONENTS 8-89 2300/20 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW2 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 4 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke PTO 08406 3 /8" x 6 Spl. PTO 0842 Quick Disconnect Repair Kit - Page 06 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO 208474 27.0 /6" (.06) 74.6 2 5 /6" (2.94) PTO 028406 PTO 02848 PTO 02842 Ball Shear PTO 048406 PTO 048420 PTO 04842 3 /8" x 6 Spl. /8" Hex 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 3007434 34.5 /32" (.36) PTO 307439 39.5 9 /6" (.56) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke Inner Tube 34.5 (4.0 Wall) mm.36" (.6 Wall) DIM "A" DIM "B" mm inches mm inches PTO 2008474 27.0 /6" (.06) 74.6 2 5 /6" (2.94) m inches PTO 4007234.5 59 /6" (59.06) PTO 407234 3.0 8 /8" (8.) PTO 4047234.0 39 3 /8" (39.37)

8-90 PTO PARTS AND COMPONENTS 2300/20 SERIES METRIC DRIVELINES & COMPONENTS Roll Pin DIM "A" DIM "B" mm inches mm inches PTO 508065 0.0 25 /64" (.39) 65.0 2 9 /6" (2.56) Outer Tube 4.0 (2.9 Wall) mm.6" (." Wall) DIM "A" mm m inches PTO 600724 4.0 (3.0 Wall).5 59 /6" (59.06) PTO 60724 4.0 (3.0 Wall) 3.0 8 /8" (8.) PTO 604724 4.0 (3.0 Wall).0 39 3 /8" (39.37) Implement Yoke Shear Pin With Pin Hole Guard mm inches PTO 8028420 3.8 /4" (.25) PTO 8028430 30.0 3 /6" (.8) PTO 8028435 35.0 3 /8" (.38) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 700744 4.3 5 /8" (.63) PTO 707448 48.0 57 /64" (.89) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 96025 PTO 9023560 60" PTO 96025 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Implement Yoke Easy Lock Replacement Kit Round Bore With Keyway & Set Screw PTO 3005000 (4 per kit) STANDARD KEYWAY mm inches mm inches PTO 8008430 30.0 3 /6" (.8) 8.0 5 /6" (.3) PTO 800840 3.8 /4" (.25) 6.4 /4" (.25) PTO 80084 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8008424 38. /2" (.50) 9.5 3 /8" (.38) PTO 8008435 35.0 3 /8" (.38) 0.0 25 /64" (.39)

PTO PARTS AND COMPONENTS 8-9 220/720 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW22 Cross & Bearing Kit and Outboard Yokes interchange with Bondioli 6 Series. Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke PTO 08606 3 /8" x 6 Spl. PTO 08620 PTO 0862 3 /4" x 20 Spl. 3 /8" x 2 Spl. Quick Disconnect Repair Kit - Page 8806 DIM "A" DIM "B" mm inches mm inches PTO 208692 30.2 3 /6" (.9) 92.0 3 5 /8" (3.62) PTO 028606 PTO 02868 PTO 028620 PTO 02862 PTO AP3534 3 /8" x 6 Spl. /8" Hex 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /4" x 6 Spl. Bore Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) Ball Shear mm inches PTO 048606 3 /8" x 6 Spl. PTO 3007539 39.5 9 /6" (.56) PTO 048620 3 /4" x 20 Spl. PTO 04862 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke Inner Tube 39.5 (4.5 Wall) mm.56" (.8 Wall) DIM "A" DIM "B" mm inches mm inches PTO 2008692 30.2 3 /6" (.9) 92.0 3 5 /8" (3.62) m inches PTO 4007539.5 59 /6" (59.06) PTO 407539 3.0 8 /8" (8.) PTO 4047539.0 39 3 /8" (39.37)

8-92 PTO PARTS AND COMPONENTS 220/720 SERIES METRIC DRIVELINES & COMPONENTS Roll Pin DIM "A" DIM "B" mm inches mm inches 25 PTO 508080 0.0 /64" (.39) 80.0 3 5 /32" (3.0) Outer Tube Implement Yoke Shear Pin With Pin Hole mm inches PTO 80286 35.0 3 /8" (.38) PTO 8028620 3.8 /4" (.25) 48.0 (3.8 Wall) mm.89" (.5" Wall) m inches PTO 6007248.5 59 /6" (59.06) PTO 607248 3.0 8 /8" (8.) PTO 6047248.0 39 3 /8" (39.37) Guard Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 7007548 48.0 57 /64" (.89) Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 963525 PTO 9023560 60" PTO 963525 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Implement Yoke Easy Lock Replacement Kit Round Bore With Keyway & Set Screw PTO 3005000 (4 per kit) STANDARD KEYWAY mm inches mm inches PTO 800860 3.8 /4" (.25) 6.4 /4" (.25) PTO 80086 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8008624 38. /2" (.50) 9.5 3 /8" (.38) PTO 8008628 44.5 3 /4" (.75) 9.5 3 /8" (.38) PTO 8008635 35.0 3 /8" (.38) 0.0 25 /64" (.39) PTO 8008640 40.0 37 /64" (.57) 2.0 5 /32" (.47)

PTO PARTS AND COMPONENTS 8-93 2400 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW35 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 07606 PTO 07620 PTO 0762 Quick Disconnect Repair Kit - Page 06 PTO 027606 PTO 027620 PTO 02762 PTO AP3534 Ball Shear PTO 047606 PTO 047620 PTO 04762 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2007676 32.0 /4" (.26) 76.0 3" (3.00) Extended Lubrication Cross & Bearing Kit (E-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 207676 32.0 /4" (.26) 76.0 3" (3.00) Inner Profile Yoke PTO 3007639 (Lemon) PTO 30765 (Star) Inner Tube DIM "A" PROFILE DIM "B" PROFILE mm inches mm inches 39.5 9 /6" (.56) - - - - 5.4 2 /64" (2.02) DIM "A" DIM "B" m inches PTO 4007539 39.5 (4.5 wall) -.5 59 /6" (59.06) PTO 400765-5.0 (6.0 wall).5 59 /6" (59.06) PTO 407539 39.5 (4.5 wall) - 3.0 8 /8" (8.) PTO 40765-5.0 (6.0 wall) 3.0 8 /8" (8.) PTO 4047539 39.5 (4.5 wall) -.0 39 3 /8" (39.37) PTO 404765-5.0 (6.0 wall).0 39 3 /8" (39.37) Roll Pin DIM "A" DIM "B" mm inches mm inches PTO 508075 0.0 25 /64" (.39) 75.0 2 6 /64" (2.95)

8-94 PTO PARTS AND COMPONENTS 2400 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube Implement Yoke Shear Pin With Pin Hole DIM "A" DIM "B" m inches PTO 6007548 48.0 (4.0 Wall) -.5 59 /6" (59.06) PTO 600766-6.0 (4.0 Wall).5 59 /6" (59.06) PTO 607548 48.0 (4.0 Wall) - 3.0 8 /8" (8.) PTO 60766-6.0 (4.0 Wall) 3.0 8 /8" (8.) PTO 6047548 48.0 (4.0 Wall) -.0 39 3 /8" (39.37) PTO 604766-6.0 (4.0 Wall).0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) DIM "B" BORE mm inches mm inches PTO 7007648 48.0 7 /8" (.89) - - PTO 700766 - - 6.0 2 3 /32" (2.40) mm inches PTO AP35030 30.0 PTO AE3503 3.75 /4" PTO 80276 35.0 3 /8" (.38) PTO 8027622 35.0 3 /8" (.38) PTO 8027630 (with 3 mm Pin Hole) 35.0 3 /8" (.38) PTO 8027640 (with 3 mm Pin Hole) 40.0 37 /64" (.57) PTO AP35040 40.0 Clamp Yoke Guard PTO 8077620 3 /4" x 20 Spl. (.75) PTO 807762 3 /8" x 2 Spl. (.38) PTO 8077622 3 /8" x 6 Spl. (.38) PTO AP0525 25mm -Rd. & Kw PTO AP0530 30mm -Rd. & Kw Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY mm inches mm inches PTO AP35330 30.0 - - - PTO 800760 3.8 /4" (.25) 6.4 /4" (.25) PTO 80076 34.9 3 /8" (.38) 8.0 5 /6" (.3) PTO 8007635 35.0 3 /8" (.38) 0.0 25 /64" (.39) PTO 8007640 40.0 37 /64" (.57) 2.0 5 /32" (.47) PTO AP35342 42.0 - - - Order Bearings as required Easy Lock Replacement Kit PTO 3005000 (4 per kit) OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 963525 PTO 9023560 60" PTO 963525 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4007640 40" 3 /8" x 6 Spl. 3 /8" x 6 Spl. PTO 4307645 45" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. with Overrunning Clutch

PTO PARTS AND COMPONENTS 8-95 2500 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW36 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 07906 PTO 07920 PTO 0792 Quick Disconnect Repair Kit - Page 06 PTO 027906 PTO 027920 PTO 02792 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2007989 36.0 27 /64" (.42) 88.8 3 /2" (3.50) Extended Lubrication Cross & Bearing Kit (E-Kit) Auto-Lok Tractor Yoke Auto-Lok Repair Kit - Page 06 PTO 07906 Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 300795 5.4 2 /64" (2.02) Inner Tube 3 /8" x 6 Spl. 5.0 mm (6.0 Wall) mm 2.00" (.24" Wall) m inches PTO 400765.5 59 /6" (59.06) PTO 40765 3.0 8 /8" (8.) PTO 404765.0 39 3 /8" (39.37) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 207989 36.0 27 /64" (.42) 88.8 3 /2" (3.50) DIM "A" DIM "B" mm inches mm inches 25 PTO 508090 0.0 /64" (.39) 90.00 3 35 /64" (3.54)

8-96 PTO PARTS AND COMPONENTS 2500 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 6.0 (4.3 Wall) mm 2.40" (.7" Wall) m inches PTO 600796.5 59 /6" (59.06) PTO 60796 3.0 8 /8" (8.) PTO 604796.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm inches PTO 700796 6.0 2 3 /32" (2.40) Implement Yoke Shear Pin With Pin Hole Clamp Yoke Guard mm inches PTO 8027922 35.0 3 /8" (.38) PTO 8027924 38. /2" (.50) PTO AP36040 40.0 PTO AP36045 45.0 PTO 8077906 3 /8" x 6 Spl. PTO 807798 3 /4" x 6 Spl. PTO 8077920 3 /4" x 20 Spl. PTO 807792 3 /8" x 2 Spl. PTO AP36535 35 mm Bore Implement Yoke Round Bore With Keyway & Set Screw STANDARD KEYWAY mm inches mm inches PTO 8007922 35.0 3 /8" (.38) 8.0 5 /6" (.3) PTO 8007924 38. /2" (.50) 9.5 3 /8" (.37) PTO 8007935 35.0 3 /8" (.38) 0.0 25 /64" (.39) Spline Bore With Pin Hole Order Bearings as required OVERALL DRIVELINE Easy Lock Replacement Kit BEARING KIT (2 PER KIT) PTO 9023548 48" PTO 963525 PTO 9023560 60" PTO 963525 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes. PTO 80792 3 /8" x 2 Spl. PTO 3005000 (4 per kit) Drivelines OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4007955 (Star Tubing) 55" 3 /8" x 6 Spl. QD 3 /8" x 2 Spl. with Pinhole PTO 4207939 30" 3 /4" x 20 Spl. QD 3 /8" x 2 Spl. with Friction Clutch PTO 427939 39" 3 /8" x 2 Spl. 3 /8" x 6 Spl. with Friction Clutch

PTO PARTS AND COMPONENTS 8-97 2600 SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW26 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 07006 3 /8" x 6 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) PTO 07020 3 /4" x 20 Spl. PTO 0702 Quick Disconnect Repair Kit - Page 06 3 /8" x 2 Spl. DIM "A" PROFILE mm inches PTO 300706 6.0 2 3 /32" (2.40) PTO 027006 PTO 027020 3 /8" x 6 Spl. 3 /4" x 20 Spl. Inner Tube PTO 02702 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) 6.0 mm (4.3 Wall) mm 2.40" (.7" Wall) Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches PTO 2007004 42.0 2 /32" (.65) 04.0 4 3 /32" (4.09) m inches PTO 600796.5 59 /6" (59.06) PTO 60796 3.0 8 /8" (8.) PTO 604796.0 39 3 /8" (39.37) Extended Lubrication Cross & Bearing Kit (E-Kit) Roll Pin Snap Ring Located in Yoke DIM "A" DIM "B" mm inches mm inches DIM "A" DIM "B" mm inches mm inches PTO 207004 42.0 2 /32" (.65) 04.0 4 3 /32" (4.09) PTO 508090 0.0 25 /64" (.39) 90.00 3 35 /64" (3.54)

8-98 PTO PARTS AND COMPONENTS 2600 SERIES METRIC DRIVELINES & COMPONENTS Outer Tube 7.5 (4.9 Wall) mm 2.8" (.9" Wall) Implement Yoke Round Bore With Keyway & Set Screw m inches PTO 600707.5 59 /6" (59.06) PTO 60707 3.0 8 /8" (8.) PTO 604707.0 39 3 /8" (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) STANDARD KEYWAY mm inches mm inches PTO 8007024 38. /2" (.50) 9.5 3 /8" (.37) PTO 8007026 4.3 5 /8" (.63) 9.5 3 /8" (.37) PTO 8007028 44.5 3 /4" (.75) 9.5 3 /8" (.37) PTO 8007032 50.8 2" (2.00) 2.7 /2" (.50) Easy Lock Replacement Kit mm inches PTO 700707 7.7 2 53 /64" (2.82) PTO 3005000 (4 per kit) Guard Order Bearings as required OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 9004548 48" PTO 964535 PTO 9004560 60" PTO 964535 Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page ) 2) Guards must rotate freely on yokes.

PTO PARTS AND COMPONENTS 8-99 II SERIES Interchanges with Walterscheid METRIC DRIVELINES & COMPONENTS AW2 Tractor Yoke Quick Disconnect Repair Kit - Page 06 PTO 027806 PTO 02782 PTO AP234 PTO AP220 Cross & Bearing Kit 3 /8" x 6 Spl. 3 /8" x 2 Spl. ¾" x 6 Spl. ¾" x 20 Spl. Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke) mm DIM "A" PROFILE inches PTO 3007839 39.5 9 /6" (.56) Outer Profile Yoke Snap Ring Located in Bushing With Bearing Groove (Guard must rotate freely on yoke) DIM "A" DIM "B" mm inches mm inches PTO 2007890 34.0 /32" (.34) 90.2 3 35 /64" (3.55) DIM "A" PROFILE mm inches PTO 7007848 48.0 7 /8" (.89)

8-00 PTO PARTS AND COMPONENTS II SERIES Clamp Yokes METRIC DRIVELINES & COMPONENTS SIZE D C B PTO AP2535 35 0 38.3 PTO AP2538 40 2 43.3 SIZE D SPLINE PTO AP252 3 /8" 2 Hub Yokes SIZE D F PTO AP2035 35 3

PTO PARTS AND COMPONENTS 8-0 PROFILE SHAFTING AND TUBING METRIC DRIVELINES & COMPONENTS SERIES METERS INCHES USE AS ByPy PTO 400626.5 59 /6" Inner ByPy PTO 40626 3.0 8 5 /6" Inner ByPy PTO 404626.0 39 3 /8" Inner ByPy PTO 600633.5 59 /6" Outer ByPy PTO 60633 3.0 8 5 /6" Outer ByPy PTO 604633.0 39 3 /8" Outer ByPy 2 PTO 4006229.5 59 /6" Inner ByPy 2 PTO 406229 3.0 8 5 /6" Inner ByPy 2 PTO 4046229.0 39 3 /8" Inner ByPy 2 PTO 6006236.5 59 /6" Outer ByPy 2 PTO 606236 3.0 8 5 /6" Outer ByPy 2 PTO 6046236.0 39 3 /8" Outer ByPy 3 PTO 6006236.5 59 /6" Inner ByPy 3 PTO 606236 3.0 8 5 /6" Inner ByPy 3 PTO 6046236.0 39 3 /8" Inner ByPy 3 & 4 PTO 6006343.5 59 /6" Outer ByPy 3 & 4 PTO 606343 3.0 8 5 /6" Outer ByPy 3 & 4 PTO 6046343.0 39 3 /8" Outer ByPy 4 PTO 4006436.5 59 /6" Inner ByPy 4 PTO 406436 3.0 8 5 /6" Inner ByPy 4 PTO 4046436.0 39 3 /8" Inner ByPy 5 & 6 PTO 4006545.5 59 /6" Inner ByPy 5 & 6 PTO 406545 3.0 8 5 /6" Inner ByPy 5 & 6 PTO 4046545.0 39 3 /8" Inner ByPy 5 PTO 6006552.5 59 /6" Outer ByPy 5 PTO 606552 3.0 8 5 /6" Outer ByPy 5 PTO 6046552.0 39 3 /8" Outer ByPy 6, 7N & 8 PTO 6006654.5 59 /6" Outer ByPy 6, 7N & 8 PTO 606654 3.0 8 5 /6" Outer ByPy 6, 7N & 8 PTO 6046654.0 39 3 /8" Outer ByPy 7N PTO 4006745.5 59 /6" Inner ByPy 7N PTO 406745 3.0 8 5 /6" Inner ByPy 7N PTO 4046745.0 39 3 /8" Inner ByPy 9 PTO 4006954.5 59 /6" Inner ByPy 9 PTO 406954 3.0 8 5 /6" Inner ByPy 9 PTO 4046954.0 39 3 /8" Inner ByPy 8 & 9 PTO 6006863.5 59 /6" Outer ByPy 8 & 9 PTO 606863 3.0 8 5 /6" Outer ByPy 8 & 9 PTO 6046863.0 39 3 /8" Outer AW0 PTO 400723.5 59 /6" Inner AW0 PTO 40723 3.0 8 5 /6" Inner AW0 PTO 404723.0 39 3 /8" Inner AW0 PTO 600730.5 59 /6" Outer AW0 PTO 60730 3.0 8 5 /6" Outer AW0 PTO 604730.0 39 3 /8" Outer AW & 2 PTO 4007234.5 59 /6" Inner AW & 2 PTO 407234 3.0 8 5 /6" Inner AW & 2 PTO 4047234.0 39 3 /8" Inner AW & 2 PTO 600724.5 59 /6" Outer SERIES METERS INCHES USE AS AW & 2 PTO 60724 3.0 8 5 /6" Outer AW & 2 PTO 604724.0 39 3 /8" Outer AW35 (Lemon) PTO 4007539.5 59 /6" Inner AW35 (Lemon) PTO 407539 3.0 8 5 /6" Inner AW35 (Lemon) PTO 4047539.0 39 3 /8" Inner AW35 (Lemon) PTO 6007548.5 59 /6" Outer AW35 (Lemon) PTO 607548 3.0 8 5 /6" Outer AW35 (Lemon) PTO 6047548.0 39 3 /8" Outer AW35 & 36 (Star) PTO 400765.5 59 /6" Inner AW35 & 36 (Star) PTO 40765 3.0 8 5 /6" Inner AW35 & 36 (Star) PTO 404765.0 39 3 /8" Inner AW36 (Star) PTO 600796.5 59 /6" Outer AW36 (Star) PTO 60796 3.0 8 5 /6" Outer AW36 (Star) PTO 604796.0 39 3 /8" Outer AW26 PTO 400796.5 59 /6" Inner AW26 PTO 40796 3.0 8 5 /6" Inner AW26 PTO 404796.0 39 3 /8" Inner AW26 PTO 600707.5 59 /6" Outer AW26 PTO 60707 3.0 8 5 /6" Outer AW26 PTO 604707.0 39 3 /8" Outer German-Style Shafting & Tubing Lemon & Star Profile Italian-Style Shafting & Tubing Tri-Lobe Profile

8-02 PTO PARTS AND COMPONENTS LEMON TUBES (Fits Walterscheid & Agdrive) All tubes are 50 cm long. A B C PTO AP23050 Solid 23.5 mm 3 mm PTO 400723 4 23.5 mm 3 mm PTO 600730 2.8 30 mm 39 mm PTO 4007234 4 34.5 mm 40 mm PTO 600724 3 4 mm 48 mm PTO 4007539 4.5 39.5 mm 49 mm PTO 6007548 4 48 mm 57.5 mm STAR PROFILE TUBES All tubes are 50 cm long. PTO 400795 PTO 600796 TRIANGLE TUBES (Fits Bondioli & Pavesi) All tubes are 50 cm long. A B PTO 400626 PTO 600633 PTO 4006229 PTO 4006336 3.5 2.6 4 3.4 26 mm 33 mm 29 mm 36 mm PTO 6006343 3 43 mm PTO 4006436 PTO 6006343 PTO 4006545 PTO 6006552 4 3 4 3 36 mm 43 mm 45 mm 52 mm A B PTO 4006745 PTO 6006654 5 4.5 45 mm 54 mm PTO 6006863 4 63 mm PTO 4000954 PTO 6006863 5 4 54 mm 63 mm PTO 66650 6 66 mm

PTO PARTS AND COMPONENTS 8-03 METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid METRIC DRIVELINES & COMPONENTS Fertilizer Spreader SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 400627 ByPy 27" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400635 ByPy 35" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD Post Hole Digger SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006252 ByPy 2 (Light Duty) 52" 3 /8" x 6 Spl. QD /4" Rd. with Pinhole PTO 4006453 ByPy 4 (Heavy Duty) 53" 3 /8" x 6 Spl. QD /4" Rd. with Pinhole Finishing Mower SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006340 ByPy 3 40" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006446 ByPy 4 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006637 ByPy 6 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD Catfish Pond Driveline SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006424 ByPy 4 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 4006524 ByPy 5 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 4006624 ByPy 6 48" 3 /8" x 6 Spl. QD /2" Rd. PTO 406524 ByPy 5 48" 3 /8" x 2 Spl. QD /2" Rd. PTO 406624 ByPy 6 48" 3 /8" x 2 Spl. QD /2" Rd. Hammer Mill SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4006628 ByPy 6 48" 3 /8" x 6 Spl. QD 3 /4" Rd. PTO 4006748 ByPy 7 48" 3 /8" x 6 Spl. QD 3 /4" Rd.

8-04 PTO PARTS AND COMPONENTS METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid METRIC DRIVELINES & COMPONENTS All Purpose Drivelines SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 400637 ByPy 37" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006247 ByPy 2 47" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006438 ByPy 4 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006455 ByPy 4 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006448 ByPy 4 48" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006543 ByPy 5 43" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006555 ByPy 5 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006642 ByPy 6 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006644 ByPy 6 44" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006655 ByPy 6 55" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006657 ByPy 6 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006846 ByPy 8 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 4006857 ByPy 8 57" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 406542 ByPy 5 42" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 406666 ByPy 6 66" 3 /8" x 2 Spl. QD /2" Rd. PTO 404648 ByPy 48" 3 /8" x 6 Spl. QD * PTO 4046248 ByPy 2 48" 3 /8" x 6 Spl. QD * PTO 4046260 ByPy 2 60" 3 /8" x 6 Spl. QD * PTO 4046348 ByPy 3 48" 3 /8" x 6 Spl. QD * PTO 4046360 ByPy 3 60" 3 /8" x 6 Spl. QD * PTO 4046448 ByPy 4 48" 3 /8" x 6 Spl. QD * PTO 4046460 ByPy 4 60" 3 /8" x 6 Spl. QD * PTO 4046548 ByPy 5 48" 3 /8" x 6 Spl. QD * PTO 4046560 ByPy 5 60" 3 /8" x 6 Spl. QD * PTO 4046648 ByPy 6 48" 3 /8" x 6 Spl. QD * PTO 4046660 ByPy 6 60" 3 /8" x 6 Spl. QD * PTO 4046748 ByPy 7 48" 3 /8" x 6 Spl. QD * PTO 4046760 ByPy 7 60" 3 /8" x 6 Spl. QD * PTO 4046848 ByPy 8 48" 3 /8" x 6 Spl. QD * PTO 4046860 ByPy 8 60" 3 /8" x 6 Spl. QD * PTO 4046948 ByPy 9 48" 3 /8" x 6 Spl. QD * PTO 4046960 ByPy 9 60" 3 /8" x 6 Spl. QD * PTO 4066644 ByPy 6 44" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO 4066846 ByPy 8 46" 3 /8" x 2 Spl. QD 3 /8" x 2 Spl. QD PTO 40755 W/S 200 55" 3 /8" x 6 Spl. QD 30-mm Friction Clutch PTO 427939 W/S 2500 39" 3 /8" x 6 Spl. QD 30-mm Friction Clutch *Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and yoke as required. Peanut Harvester Non-CV PTO 4007955 (Star) SERIES W/S 2500 OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE 55" 3 /4" x 20 Spl. QD 3 /8" x 2 Spl. QD

PTO PARTS AND COMPONENTS 8-05 METRIC REPLACEMENT DRIVELINES Interchanges with Bondioli & Pavesi and Walterscheid Rotary Cutter METRIC DRIVELINES & COMPONENTS SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 400625 ByPy 2 Pull (Towed) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006432 ByPy 4 4 ft. Lift (3-pt Hitch) 32" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006436 ByPy 4 5 ft. Lift (3-pt Hitch) 36" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006442 ByPy 4 6 ft. Lift (3-pt Hitch) 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 400645 ByPy 4 Pull (Towed) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006542 ByPy 5 6 ft. Lift (3-pt Hitch) 42" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole PTO 4006546 ByPy 5 6 ft. Heavy Duty 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD PTO 400655 ByPy 5 6 ft. Lift (3-pt Hitch) 5" 3 /8" x 6 Spl. QD 3 /8" Rd. PTO 4006652 ByPy 6 7 ft. Lift (3-pt Hitch) 52" 3 /8" x 6 Spl. QD 3 /8" Rd. w/pinhole Rotary Cutter/Tiller SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 406438 ByPy 4 Pull (Towed) 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406546 ByPy 5 Pull (Towed) 46" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406654 ByPy 6 7 ft. Lift (3-pt Hitch) 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406233 ByPy 2 Pull (Towed) 33" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406436 ByPy 4 Pull (Towed) 36" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. w/friction Clutch PTO 406660 ByPy 6 7 ft. Lift (3-pt Hitch) 60" 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch PTO 40666 ByPy 6 7 ft. Lift (3-pt Hitch) 6" 3 /8" x 6 Spl. QD 3 /4" x 20 Spl. w/friction Clutch Hay Tedder SERIES TYPE OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4206252 ByPy 2* 2-Rotor 52" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. Radial Pin Clutch PTO 4206454 ByPy 4** 4-Rotor 54" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. Radial Pin Clutch PTO 4207939 W/S 2500-39" 3 /4" x 20 Spl. QD 3 /4" x 2 Spl. QD Radial Pin Clutch Disc Mower SERIES OVERALL COMP. DIM "A" TRACTOR YOKE IMPLEMENT YOKE PTO 4306538 ByPy 5 38" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch PTO 4306639 ByPy 6 39" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch PTO 4307645 W/S 2400 45" 3 /8" x 6 Spl. QD 3 /8" x 6 Spl. QD w/overrunning Clutch

8-06 PTO PARTS AND COMPONENTS Q.D. REPAIR KIT METRIC DRIVELINES & COMPONENTS PTO 30062 DESCRIPTION Repair kit for 3 /8" x 6 Spl. & 3 /8" x 2 Spl. Bondioli & Pavesi Series, 2, 3, 4, 5, 6, 7N, 8 and 9 PTO 3006720 PTO 300672 DESCRIPTION Repair kit for 7N Series 3 /4" x 20 Spl. PTO 300720 DESCRIPTION Repair kit for 3 /4" x 20 Spl. All Walterscheid Series Spring Internal to Yoke PTO 300738 DESCRIPTION Repair kit for 3 /8" x 6 Spl. & 3 /8" x 2 Spl. All Walterscheid Series LOCKING DEVICE REPAIR KIT *Auto-Lok/Safety Slide Lock PTO 3004000 DESCRIPTION Repair Kit for Weasler Auto-Lok and Safety Slide Lock 6 Spline & 2 Spline *This repair kit contains both balls & pawls. When repairing the "Safety Slide Lock" use the pawls only and discard the balls. When repairing the "Auto-Lok" use both the balls and the pawls.

PTO PARTS AND COMPONENTS 8-07 PARTS FOR FRICTION CLUTCHES CLUTCH DISC. DIA. (MM) DISC QTY REQ. SPRING PTO AK42075 40 PTO AB200440 2 PTO AB206 8 PTO AK622090 40 PTO AB200440 2 PTO AB207 8 PTO AK500090 40 PTO AB200440 2 PTO AB207 8 PTO AK72325 60 PTO AB200460 2 PTO AB207 8 PTO AK3525 60 PTO AB200460 2 PTO AB207 8 PTO AK7N200 60 PTO AB200460 4 PTO AB207 8 PTO AK82425 60 PTO AB200460 2 PTO AB207 8 PTO AK36200 60 PTO AB200460 4 PTO AB207 8 PTO AK3875 40 PTO AB200440 2 PTO AB206 8 PTO AK3890 40 PTO AB200440 2 PTO AB207 8 PTO AK3825 60 PTO AB200460 2 PTO AB207 8 QTY REQ. FLANGE YOKES FOR FRICTION CLUTCHES Item #8 in diagram SERIES DESCRIPTION PTO AB20084 AB4/AW2 8 holes PTO AB20085 AB5 8 holes PTO AB20086 AB6/AW22 8 holes

8-08 PTO PARTS AND COMPONENTS SAFETY CONES Replace that bent metal shield for complete safety! L D D MACHINE SIZE (MM) PTO AS22286 95 294 20 66 PTO AS5590 50 208 50 PTO AS8209 50 257 200 PTO AS380L90 90 220 60 COMPLETE DRIVE LINES Units are complete with 3 /8" - 6 spline tractor QD yoke but do not include implement yoke. Shielding is included. Units are Waltersheld (lemon tube) style of profiles. HP @ 540 RPM FOR IMPLEMENT YOKES SEE PAGE # PTO AW02 6 68 PTO AB05 6 - *This unit is 28" overall length collapsed and is complete with 3/8-6 spline yoke on both ends. Unit is well suited for fertilizer spreader. SPIRAL PINS Bulk - sold in quantities of 0 See Section 4 for pricing. A x B HAR 2788 /8" x " HAR 2789 3 /6" x " HAR 2790 3 /6" x 2" HAR 279 /4" x " HAR 2792 /4" x /2" HAR 2793 /4" x 2" HAR 2794 5 /6" x /2" HAR 2795 5 /6" x 2" A x B HAR 2796 5 /6" x 2 3 /4" HAR 2797 3 /8" x /2" HAR 2798 3 /8" x 2" HAR 2799 3 /8" x 3" HAR 2800 7 /6" x /2" HAR 280 7 /6" x 2" HAR 2802 7 /6" x 3" HAR 2803 /2" x 2" HAR 2804 /2" x 3" Package contains: 0 of /8" x " 0 of 3 /6" x 2" 0 of /4" x /2" 9 of 5 /6" x /2" 5 of 5 /6" x 2 3 /4" 5 of 3 /8" x 2" 5 of 7 /6" x /2" 5 of 7 /6" x 3" 4 of /2" x 3" HAR 2805 0 of 3 /6" x " 0 of /4" x " 0 of /4" x 2" 6 of 5 /6" x 2" 7 of 3 /8" x /2" 5 of 3 /8" x 3" 5 of 7 /6" x 2" 4 of /4" x 2" 80 C.V. ROUND BALER DRIVELINES Driveline Tractor Shaft Half Assembly C.V. Female Tractor Half Produced 2005-2007 for John Deere Round Balers. SERIES TRACTOR YOKE SHAFT HALF FITS SERIES TRACTOR YOKE TUBE HALF PTO 9503506 35R 3 /8" x 6 Spline /6" x 2 Spline Gehl, John Deere, Case, Vermeer, Hesston and others PTO 924503559 PTO 924603559 35R 35R 3 /8" x 6 Spline 3 /8" x 2 Spline 2 /2" O.D. 2 /2" O.D.

PTO PARTS AND COMPONENTS 8-09 80 CONSTANT VELOCITY DRIVELINE CONSTANT VELOCITY With innovative and patented features exclusive to Weasler for North American-style Drivelines. Features ARTICULATED GUARD SYSTEM CV center housing accommodates a bell that fits within minimum ASAE tractor master shield. Bell is articulated to allow a full 80. The plastic guard over the CV joint is supported by a bearing that rides on the center housing. TELESCOPING DRIVELINE The Weasler CV driveline utilizes shafts that telescope into a hardened sleeve with a large grease reservoir. Reduced friction means low thrust, for minimal wear throughout CV life. Tested in contaminated environments. LONG LIFE Compact, heavy duty center housing has a large capacity grease cavity and unique lubrication system. Patented grease system insures positive one shot lubrication of hardened and ground centering balls and sockets. Unique center slider support plates greatly increases life by retaining lubrication and sealing out contaminants. Full surface contact means reduced wear on all components, minimizing vibration. HIGH TORSIONAL STRENGTH The exclusive ball and socket of the Weasler CV is integral with the yoke. Trunnions on the center plate are supported directly in the yoke by the ball and socket, providing strength for heavy-duty applications. Forged yokes and center housing are engineered for high torque. Benefits Applications Constant Velocity Drivelines allow turns at high angles under full power without damaging the driveline or other components. When using conventional drivelines, the vibrations increase as the angle increases. A CV driveline will substantially reduce vibrations due to its operating at a constant speed. The reduction in vibration will result in fewer breakdowns and lower cost of implement maintenance. Listed are some applications of 80 CV drivelines that Weasler currently produces for Original Equipment Manufacturers. Round Balers Square Balers Orchard Sprayers Flexwing Mowers Manure Pumps Beet Toppers Rock Pickers Stalk Choppers Box-type Manure Spreaders Tank-type Manure Spreaders Mower Conditioners Peanut Harvesters

8-0 PTO PARTS AND COMPONENTS 80 CONSTANT VELOCITY DRIVELINE CONSTANT VELOCITY A = Overall Length B = Centerline Length Constant Velocity Driveline Replacement Chart ASAE CATEGORY WEASLER SERIES REPLACEMENT FOR 3 4 Bondioli & Pavesi 4 Series Walterscheid 2380 Series 4 35 Bondioli & Pavesi 5 Series 5 35/44 6 55 Bondioli & Pavesi 6 Series Walterscheid 2480 Series Bondioli & Pavesi 8 Series Walterscheid 2580 Series & 2680 Series The above chart lists the approximate size replacement for Constant Velocity Drivelines. These are not an exact interchange, and should be used as a general replacement guide only. NOTE: 35/44 refers to CV Series. When CV is assembled with 44 Series tube end driveline becomes a 44 Series. When CV is assembled with a 35 Series tube end driveline is a 35 Series. Instructions for Ordering a CV Driveline To determine the series of a Weasler driveline, reference the dimension of the Cross & Bearing as illustrated on page 5. To determine the series as a replacement for a competitive driveline, reference the above chart. Determine the overall length of the driveline in a closed position (DIM "A") in the illustration. Next, select the part number which closely corresponds with the appropriate series and length. Some drivelines are furnished without Cross & Bearing Kit and Implement Yoke. For implement yoke selection, refer to the appropriate Weasler Aftermarket Driveline Component section. GUARDS MUST ROTATE FREELY ON YOKES.

PTO PARTS AND COMPONENTS NORTH AMERICAN SECTION 80 CV CATEGORY 3/4 SERIES 8- NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 07406 PTO 07420 PTO 0742 Spring-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Center Housing PTO 550430 Yoke & Shaft PTO 08406 PTO 0842 3 /8" x 6 Spl. 3 /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 SHAFT SIZE DIM "A" SHAFT PTO 00400 " x /8" Rect. 27 /4" PTO 406 PTO 420 PTO 42 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Yoke, Tube & Sleeve Assembly Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 200430 /8" 2 5 /8" 4 /4" /8" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL TO END OF SLEEVE PTO 0448 " x /8" Rect. N/A 48" 3.62" PTO 0458 " x /8" Rect. N/A 58" 4.62" PTO 0467 " x /8" Rect. N/A 67" 50.62" DIM "A" DIM "B" DIM "C" DIM "D" PTO 20430 /8" 2 5 /8" 4 /4" /8" Yoke, Tube & Sleeve Assembly w/guard Shaft " x /8" Rectangular PTO 40068 6' PTO 4068 0' PTO 40468 3' DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL TO END OF SLEEVE PTO 750448 " x /8" Rect. N/A 48" 3.62" PTO 750458 " x /8" Rect. N/A 58" 4.62" PTO 750467 " x /8" Rect. N/A 67" 50.62"

8-2 PTO PARTS AND COMPONENTS 80 CV CATEGORY 3/4 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Joint & Shaft w/guard SHAFT SIZE SHAFT TRACTOR YOKE PTO 550406 " x /8" Rect. 27 /4" 3 /8" x 6 Spl. PTO 56042 " x /8" Rect. 27 /4" 3 /8" x 2 Spl. SHAFT SIZE SHAFT TRACTOR YOKE PTO 950406 " x /8" Rect. 27 /4" 3 /8" x 6 Spl. PTO 96042 " x /8" Rect. 27 /4" 3 /8" x 2 Spl. Guard Assembly instructions included with guard. Note: When installing Guards observe the following: ) Install proper nylon bearing (See Page 0) 2) Guards must rotate freely on yokes. OVERALL DRIVELINE BEARING KIT (2 PER KIT) PTO 92448 48" PTO 92400 PTO 92458 58" PTO 92400 PTO 92467 67" PTO 92400 Easy Lock Replacement Kit PTO 3005000 (4 per kit) Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED MAXIMUM OVERALL EXTENDED OPERATING TRACTOR YOKE PTO 450448 " x /8" 48" 67" 3 /8" x 6 Spl. PTO 460448 " x /8" 48" 67" 3 /8" x 2 Spl. PTO 450458 " x /8" 58" 77" 3 /8" x 6 Spl. PTO 460458 " x /8" 58" 77" 3 /8" x 2 Spl. PTO 450467 " x /8" 67" 86" 3 /8" x 6 Spl. PTO 460467 " x /8" 67" 86" 3 /8" x 2 Spl. (Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS 8-3 80 CV CATEGORY 4/35 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Yoke, Tube & Sleeve Assembly Safety Slide Lock Repair Kit - Page 49 PTO 23506 PTO 23520 PTO 2352 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO 3548 5 /6" x 20 Spl. 48" 29.25" Auto-Lok Repair Kit - Page 49 PTO 33506 PTO 33520 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO 3558 5 /6" x 20 Spl. 58" 39.38" PTO 3567 5 /6" x 20 Spl. 67" 48.25" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard PTO 3352 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 2003540 /8" 3 7 /32" 4 /4" /4" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 203540 /8" 3 7 /32" 4 /4" /4" DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO 753548 N/A 5 /6" x 20 Spl. 48" 29.25" PTO 753558 N/A 5 /6" x 20 Spl. 58" 39.37" PTO 753567 N/A 5 /6" x 20 Spl. 67" 48.25" PTO 753573 N/A 5 /6" x 20 Spl. 73" 54.37" PTO 753579 N/A 5 /6" x 20 Spl. 79" 58.25" *CL=Centerline Joint & Shaft Shaft 5 /6" x 20 Spline Induction Hardened PTO 404220 3' Center Housing SHAFT SIZE SHAFT TRACTOR YOKE PTO 5503540 5 /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO 5603540 5 /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO 5703540 5 /6" x 20 Spl. 27" 3 /4" x 20 Spl. PTO 5503540 Joint & Shaft w/guard Yoke & Shaft SHAFT SIZE SHAFT TRACTOR YOKE PTO 9503540 5 /6" x 20 Spl. 27" 3 /8" x 6 Spl. SHAFT SIZE DIM "A" SHAFT PTO 00350 5 /6" x 20 Spl. 27" PTO 9603540 5 /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO 9703540 5 /6" x 20 Spl. 27" 3 /4" x 20 Spl.

8-4 PTO PARTS AND COMPONENTS 80 CV CATEGORY 4/35 SERIES NORTH AMERICAN CONSTANT VELOCITY Guard OVERALL DRIVELINE BEARING SET PTO 92448 48" PTO 92400 PTO 92458 58" PTO 92400 PTO 92467 67" PTO 92400 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit) Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED EXTENDED OPERATING TRACTOR YOKE PTO 453548* 5 /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. PTO 463548* 5 /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. PTO 473548* 5 /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. PTO 453558* 5 /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. PTO 463558* 5 /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. PTO 473558* 5 /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. PTO 453567* 5 /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. PTO 463567* 5 /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. PTO 473567* 5 /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. PTO 453573* 5 /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. PTO 463573* 5 /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. PTO 473573* 5 /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. *(Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS 8-5 80 CV CATEGORY 5/35/44 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 073506 PTO 073520 PTO 3506 PTO 3520 PTO 352 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO 07352 3 /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 2003545 /4" 3 7 /32" 4 5 /6" /4" Yoke, Tube & Sleeve Assembly DIM "A" BORE OVERALL DRIVELINE DIM "B" CL* TO END OF SLEEVE PTO 03548 /6" x 20 Spl. 48" 29.25" PTO 03558 /6" x 20 Spl. 58" 39.38" PTO 03567 /6" x 20 Spl. 67" 48.25" PTO 03573 /6" x 20 Spl. 73" 54.38" PTO 03579 /6" x 20 Spl. 79" 58.25" PTO 04448 /6" x 20 Spl. 48" 29.88" PTO 04458 /6" x 20 Spl. 58" 38.88" PTO 04467 /6" x 20 Spl. 67" 47.88" PTO 04473 /6" x 20 Spl. 73" 53.88" PTO 04479 /6" x 20 Spl. 79" 59.88" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 203545 /4" 3 7 /32" 4 5 /6" /4" Shaft /6" x 20 Spline Induction Hardened PTO 4042720 3' Center Housing PTO 5503545 Yoke & Shaft DIM "A" BORE DIM "B" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO 7503548 N/A /6" x 20 Spl. 48" 29.25" PTO 7503558 N/A /6" x 20 Spl. 58" 39.37" PTO 7503567 N/A /6" x 20 Spl. 67" 48.25" PTO 7503573 N/A /6" x 20 Spl. 73" 54.37" PTO 7503579 N/A /6" x 20 Spl. 79" 58.25" PTO 7503548 N/A /6" x 20 Spl. 48" 28.87" PTO 7504458 N/A /6" x 20 Spl. 58" 38.87" PTO 7504467 N/A /6" x 20 Spl. 67" 47.87" PTO 7504473 N/A /6" x 20 Spl. 73" 53.87" PTO 7504479 N/A /6" x 20 Spl. 79" 59.87" *CL=Centerline Joint & Shaft SHAFT SIZE DIM "A" SHAFT PTO 003500 /6" x 20 Spl. 27" SHAFT SIZE SHAFT TRACTOR YOKE PTO 5503506 /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO 560352 /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO 5703520 /6" x 20 Spl. 27" 3 /4" x 20 Spl.

8-6 PTO PARTS AND COMPONENTS 80 CV CATEGORY 5/35/44 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft w/guard Guard Easy Lock Replacement Kit SHAFT SIZE PTO 3005000 (4 per kit) SHAFT TRACTOR YOKE PTO 9503506 /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO 960352 /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO 9703520 /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO 923548 48" PTO 923500 PTO 923558 58" PTO 923500 PTO 923567 67" PTO 923500 PTO 923573 73" PTO 923500 PTO 923579 79" PTO 923500 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED MAX. OVERALL EXTENDED OPERATING TRACTOR YOKE IMPLEMENT YOKE PTO 4503500 /6" x 20 Spl. 58" 79" 3 /8" x 6 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO 450350 /6" x 20 Spl. 67" 88" 3 /8" x 6 Spl. 3 /8" x 2 Spl. w/friction Clutch PTO 4603500 /6" x 20 Spl. 58" 79" 3 /8" x 2 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO 4503502 /6" x 20 Spl. 58" 79" 3 /8" x 20 Spl. 3 /8" x 6 Spl. w/friction Clutch PTO 4503548 /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. N/A* PTO 4603548 /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. N/A* PTO 4703548 /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. N/A* PTO 4503558 /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. N/A* PTO 4603558 /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. N/A* PTO 4703558 /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. N/A* PTO 4503567 /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. N/A* PTO 4603567 /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. N/A* PTO 4703567 /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. N/A* PTO 4503573 /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. N/A* PTO 4603573 /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. N/A* PTO 4703573 /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. N/A* PTO 4503579 /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. N/A* PTO 4603579 /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. N/A* PTO 4703579 /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. N/A* PTO 4504448 /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. N/A* PTO 4604448 /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. N/A* PTO 4704448 /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. N/A* PTO 4504458 /6" x 20 Spl. 58" 77" 3 /8" x 6 Spl. N/A* PTO 4604458 /6" x 20 Spl. 58" 77" 3 /8" x 2 Spl. N/A* PTO 4704458 /6" x 20 Spl. 58" 77" 3 /4" x 20 Spl. N/A* PTO 4504467 /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. N/A* PTO 4604467 /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. N/A* PTO 4704467 /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. N/A* PTO 4504473 /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. N/A* PTO 4604473 /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. N/A* PTO 4704473 /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. N/A* PTO 4504479 /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. N/A* PTO 4604479 /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. N/A* PTO 4704479 /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. N/A* *(Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS 8-7 80 CV CATEGORY 6/55 SERIES NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Safety Slide Lock Repair Kit - Page 49 PTO 075506 PTO 075520 PTO 5506 PTO 5520 PTO 552 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO 07552 3 /8" x 2 Spl. Auto-Lok Repair Kit - Page 49 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Cross & Bearing Kit (R-Kit) Yoke, Tube & Sleeve Assembly DIM "A" BORE OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE PTO 05548 /6" x 20 Spl. 48" 28.88" PTO 05558 /6" x 20 Spl. 58" 38.88" PTO 05567 /6" x 20 Spl. 67" 47.88" PTO 05573 /6" x 20 Spl. 73" 53.88" PTO 05579 /6" x 20 Spl. 79" 59.88" *CL=Centerline Yoke, Tube & Sleeve Assembly w/guard DIM "A" DIM "B" DIM "C" DIM "D" PTO 2005556 5 /6" 3 23 /32" 4 5 /6" 7 /32" Extended Lubrication Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" PTO 205556 5 /6" 3 23 /32" 4 5 /6" 7 /32" Shaft /6" x 20 Spline Induction Hardened PTO 4042720 3' Center Housing DIM "A" BORE DIM "B" BORE PTO 7505548 N/A /6" x 20 Spl. PTO 7505558 N/A /6" x 20 Spl. PTO 7505567 N/A /6" x 20 Spl. PTO 7505573 N/A /6" x 20 Spl. PTO 7505579 N/A /6" x 20 Spl. PTO 92450555 N/A /6" x 20 Spl. PTO 924505555 N/A /6" x 20 Spl. PTO 92455555 N/A /6" x 20 Spl. *CL=Centerline OVERALL DRIVELINE DIM "C" CL* TO END OF SLEEVE IMPLEMENT YOKE 48" 29.25" - 58" 39.37" - 67" 48.25" - 73" 54.37" - 79" 58.25" - 5" 28.87" 55" 38.87" 55" 47.87" 3 /4" x 20 Spl. 3 /8" x 6 Spl. 3 /4" x 20 Spl. PTO 5505556 Joint & Shaft w/guard Yoke & Shaft SHAFT SIZE DIM "A" SHAFT PTO 005500 /6" x 20 Spl. 27" SHAFT SIZE SHAFT TRACTOR YOKE PTO 9505506 /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO 960552 /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO 9705520 /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl. PTO 934505555 /6" x 20 Spl. 27 /4" 3 /8" x 6 Spl. PTO 934605555 /6" x 20 Spl. 27 /4" 3 /8" x 2 Spl. PTO 934705555 /6" x 20 Spl. 27 /4" 3 /4" x 20 Spl.

8-8 PTO PARTS AND COMPONENTS 80 CV CATEGORY 6/55 SERIES NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Guard Easy Lock Replacement Kit SHAFT SIZE PTO 3005000 (4 per kit) SHAFT TRACTOR YOKE PTO 5505506 /6" x 20 Spl. 27" 3 /8" x 6 Spl. PTO 560552 /6" x 20 Spl. 27" 3 /8" x 2 Spl. PTO 5705520 /6" x 20 Spl. 27" 3 /4" x 20 Spl. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO 925548 48" PTO 925500 PTO 925558 58" PTO 925500 PTO 925567 67" PTO 925500 PTO 925573 73" PTO 925500 PTO 925579 79" PTO 925500 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page 0). 2) Guards must rotate freely on yokes. Drivelines SHAFT SIZE DIM "A" OVERALL COMPRESSED EXTENDED OPERATING TRACTOR YOKE IMPLEMENT YOKE PTO 4505548 /6" x 20 Spl. 48" 67" 3 /8" x 6 Spl. * PTO 450555 /6" x 20 Spl. 5" 68" 3 /8" x 6 Spl. 3 /4" x 20 Spl. w/clamp PTO 4505555 /6" x 20 Spl. 55" 77" 3 /8" x 6 Spl. 3 /8" x 6 Spl. w/clamp PTO 4505558 /6" x 20 Spl. 58" 80" 3 /8" x 6 Spl. * PTO 4505567 /6" x 20 Spl. 67" 84" 3 /8" x 6 Spl. * PTO 4505573 /6" x 20 Spl. 73" 92" 3 /8" x 6 Spl. * PTO 4505579 /6" x 20 Spl. 79" 96" 3 /8" x 6 Spl. * PTO 455555 /6" x 20 Spl. 55" 77" 3 /8" x 6 Spl. 3 /4" x 20 Spl. w/clamp PTO 4605548 /6" x 20 Spl. 48" 67" 3 /8" x 2 Spl. * PTO 460555 /6" x 20 Spl. 5" 68" 3 /8" x 2 Spl. 3 /4" x 20 Spl. w/clamp PTO 4605555 /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 6 Spl. w/clamp PTO 4605558 /6" x 20 Spl. 58" 80" 3 /8" x 2 Spl. * PTO 4605567 /6" x 20 Spl. 67" 84" 3 /8" x 2 Spl. * PTO 4605573 /6" x 20 Spl. 73" 92" 3 /8" x 2 Spl. * PTO 4605579 /6" x 20 Spl. 79" 96" 3 /8" x 2 Spl. * PTO 465555 /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /4" x 20 Spl. w/clamp PTO 4625555 /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 2 Spl. w/clamp PTO 4635555 /6" x 20 Spl. 55" 77" 3 /8" x 2 Spl. 3 /8" x 2 Spl. w/pinhole PTO 4705548 /6" x 20 Spl. 48" 67" 3 /4" x 20 Spl. * PTO 470555 /6" x 20 Spl. 5" 68" 3 /4" x 20 Spl. 3 /4" x 20 Spl. w/clamp PTO 4705555 /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 6 Spl. w/clamp PTO 4705558 /6" x 20 Spl. 58" 80" 3 /4" x 20 Spl. * PTO 4705567 /6" x 20 Spl. 67" 84" 3 /4" x 20 Spl. * PTO 4705573 /6" x 20 Spl. 73" 92" 3 /4" x 20 Spl. * PTO 4705579 /6" x 20 Spl. 79" 96" 3 /4" x 20 Spl. * PTO 475555 /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /4" x 20 Spl. w/clamp PTO 4725555 /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 2 Spl. w/clamp PTO 4735555 /6" x 20 Spl. 55" 77" 3 /4" x 20 Spl. 3 /8" x 2 Spl. w/pinhole *(Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS 8-9 50 CV DRIVELINE COMPONENTS NORTH AMERICAN CONSTANT VELOCITY Tractor Yoke Repair Kit - Page 49 Clamp Yoke With Keyway SERIES PTO 50406 4 3 /8" x 6 Spl. PTO 5042 4 3 /8" x 2 Spl. PTO 53506 35 3 /8" x 6 Spl. PTO 5352 35 3 /8" x 2 Spl. Shaft Weld Yoke (Guard must rotate freely on the yoke.) SERIES PTO 857420 4 /4" PTO 8573520 35 /4" PTO 8573524 35 /2" Stock Bore SERIES PTO 350400 4 " Rd. Center Housing SERIES PTO 555400 4 PTO 5553500 35 Tube Yoke (Guard must rotate freely on the yoke.) SERIES PTO 7503500 35 5 /8" SERIES PTO 859400 4 " PTO 8593500 35 " Guard PTO 950430 (Guard must rotate freely on yokes.) NOTE: *Outer Guard is larger in order to shield CV half of hte driveline. *50 CV joint and shaft half most commonly connects to the implement... ie. grain auger. Also, ball shear connects to the tractor PTO, which is the tube half. Yoke & Shaft Implement Yoke Round Bore With Keyway & Pinhole SERIES PTO 850420 4 (w/ /4" keyway & 2 set screws) /4" PTO 85420 4 (w/ /4" keyway & 3 /8" pinhole) /4" PTO 850422 4 (w/ 5 /6" keyway & /4" pinhole) 3 /8" PTO 8503522 35 (w/ 5 /6" keyway & /4" pinhole) 3 /8" SERIES SHAFT SIZE DIM "A" PTO 050400 4 " x /8" Rect. 29.38" Yoke & Tube SERIES SHAFT SIZE DIM "A" PTO 50400 4 /4" x 3 /8" Rect. 34"

8-20 PTO PARTS AND COMPONENTS 50 CV DRIVELINE COMPONENTS NORTH AMERICAN CONSTANT VELOCITY Joint & Shaft Half with Guard With Keyway, (2) Set Screws & Pinhole Ball Shear Device With Spring-Lok SERIES DIM "B" PTO 950420 4 /4" Rd. 39.63" SHEAR BOLT PTO 04406 3 /8" x 6 Spl. () 5 /6" - 8 Gr. 5 Constant Velocity Joint SHEAR BOLT PTO 043506 3 /8" x 6 Spl. (2) 3 /8" - 6 Gr. 5 SERIES DIM "B" BORE PTO 850420 4 /4" Rd. * " PTO 85420 4 /4" Rd. ** " *(with /4" keyway & 2 set screws) **(with keyway and pinhole) Applications of 50 CV Grain Augers Compost Turners Front-Mount Riding Mowers Mower Conditioners Potato Harvesters Tub Grinders

2380 SERIES Interchanges with Walterscheid (AW2) Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke PTO PARTS AND COMPONENTS METRIC SECTION DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 200749 74.6 2 5 /6 (2.93) 9.0 3 37 /64 (3.58) 23.8 5 /6 (.93) 27.0 /6 (.06) 8-2 METRIC CONSTANT VELOCITY Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 20749 74.6 2 5 /6 (2.93) 9.0 3 37 5 /64 (3.58) 23.8 /6 (.93) 27.0 /6 (.06) Tractor Yoke Safety Slide Lock Repair Kit - Page 06 Ring Groove PTO 078406 PTO 07842 3 /8" x 6 Spl. 3 /8" x 2 Spl. Inner Tube 34.5 (4.0 Wall).358 (.58 Wall)" Rilsan Coating mm inches PTO 4067234 000 39 3 /8 (39.37) Roll Pin Quick Disconnect Repair Kit - Page 06 PTO 098406 3 /8" x 6 Spl. DIM "A" DIM "B" mm inches mm inches PTO 508065 0.0 25 /64 (.393) 65.0 2 9 /6 (2.56) Center Housing Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) PTO 5507400 Outer Tube 4.0 (3.0 Wall) Special mm inches PTO 307434 34.5 23 /64 (.36) mm inches PTO 606724 000 39 3 /8 (39.37)

8-22 PTO PARTS AND COMPONENTS 2380 SERIES METRIC CONSTANT VELOCITY Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) 80 C.V. Joint mm inches PTO 700744 4.0.64 DIM "B" BORE PTO 5507406 3 /8" x 6 Spl. 34.5 mm (.358") Guard Order bearings as required. OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO 927448 48" PTO 96002 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit PTO 3005000 (4 per kit)

PTO PARTS AND COMPONENTS 8-23 2480 SERIES Interchanges with Walterscheid (AW35) METRIC CONSTANT VELOCITY Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 2007694 76 2 63 /64 (2.99) 94.0 3 45 /64 (3.70) 27 /6 (.06) 32.0 7 /64 (.26) Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 207694 76 2 63 /64 (2.99) 94.0 3 45 /64 (3.70) 27 /6 (.06) 32.0 7 /64 (.26) Tractor Yoke Inner Tube Safety Slide Lock Repair Kit - Page 06 40.0 (4.8 Wall) Rilsan Coating PTO 077606 PTO 077620 PTO 07762 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" mm inches mm inches PTO 4027639 40.0 9 /6 (.56) 000 39 3 /8 (39.37) Quick Disconnect Repair Kit - Page 06 Roll Pin PTO 097606 PTO 097620 PTO 09762 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. DIM "A" DIM "B" mm inches mm inches PTO 508080 0.0 3 /32 (.406) 80.0 3 5 /32 (3.56) Inner Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) Center Housing mm inches PTO 307639 40.0 9 /6 (.56) PTO 5507600

8-24 PTO PARTS AND COMPONENTS 2480 SERIES METRIC CONSTANT VELOCITY Outer Tube 80 C.V. Joint 48.0 (4.0 Wall) 4.0 Wall (Special) mm inches PTO 6067648 000 39 3 /8 (39.37) DIM "B" BORE PTO 5507640 3 /8" x 6 Spl. 40.0 mm (.562") Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) mm inches PTO 7007648 48.0 7 /8 (.890) Easy Lock Replacement Kit PTO 3005000 (4 per kit) Guard OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO 927648 48" PTO 960035 PTO 927660 60" PTO 960035 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Drivelines TRACTOR YOKE IMPLEMENT YOKE OVERALL DRIVELINE PTO 4507648 3 /8" x 6 Spl. 3 /8" x 6 Spl. 48" PTO 4507660 3 /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO 4607648 3 /8" x 2 Spl. 3 /8" x 6 Spl. 48" PTO 4607660 3 /8" x 2 Spl. 3 /8" x 6 Spl. 60" PTO 457660 3 /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO 467660 3 /8" x 2 Spl. 3 /8" x 6 Spl. 60" PTO 477660 3 /4" x 20 Spl. 3 /8" x 6 Spl. 60" (Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS 8-25 2580 SERIES Interchanges with Walterscheid (AW36) METRIC CONSTANT VELOCITY Cross & Bearing Kit (R-Kit) Snap Ring Located in Yoke DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 2007906 88.8 3.49 06.0 4.7 32.0.26 36.0.42 Cross & Bearing Kit (E-Kit) DIM "A" DIM "B" DIM "C" DIM "D" mm inches mm inches mm inches mm inches PTO 207906 88.8 3.49 06.0 4.7 32.0.26 36.0.42 Tractor Yoke Safety Slide Lock Repair Kit - Page 06 PTO 077906 PTO 077920 PTO 07792 With Bearing Groove (Guard must rotate freely on yoke.) 3 /8" x 6 Spl. 3 /4" x 20 Spl. 3 /8" x 2 Spl. Inner Profile Yoke Outer Tube 6.0 x 4.0 (Special) Center Housing PTO 5507900 mm inches PTO 600796 500 59 /6 (59.0) PTO 604796 500 59 /6 (59.0) mm inches PTO 302795 5.0 2 Inner Tube Rilsan Coating DIM "A" mm inches mm inches PTO 406795 5.0 2.0 000 39 3 /8 (39.37) Outer Profile Yoke With Bearing Groove (Guard must rotate freely on yoke.) mm inches PTO 700796 6.0 2 3 /8 (2.402) 80 C.V. Joint Roll Pin DIM "B" BORE DIM "A" DIM "B" mm inches mm inches PTO 508090 0.0 3 /32 (.406) 90.0 3 /2 (3.54) PTO 550795 3 /8" x 6 Spl. 5.0 mm (2.000") PTO 560795 3 /8" x 2 Spl. 5.0 mm (2.000") PTO 570795 3 /4" x 20 Spl. 5.0 mm (2.000")

8-26 PTO PARTS AND COMPONENTS 2580 SERIES METRIC CONSTANT VELOCITY Yoke, Tube & Sleeve Assembly with Guard Guard FITS PROFILE TUBE IMPLEMENT YOKE PTO 92450795 5.0 (Star) 3 /4" x 20 Spl. w/clamp PTO 924507955 5.0 (Star) 3 /8" x 6 Spl. w/clamp PTO 92457955 5.0 (Star) 3 /4" x 20 Spl. w/clamp PTO 924627955 5.0 (Star) 3 /8" x 2 Spl. w/clamp PTO 924637955 5.0 (Star) 3 /8" x 2 Spl. w/pinhole Joint & Shaft with Guard OVERALL DRIVELINE BEARING SET (2 PER KIT) PTO 927948 48" PTO 960036 PTO 927960 60" PTO 960036 Assembly instructions included with guard. NOTE: When installing Guards observe the following: ) Install proper nylon bearing (See page ). 2) Guards must rotate freely on yokes. Easy Lock Replacement Kit FITS PROFILE TUBE IMPLEMENT YOKE PTO 93457955 5.0 (Star) 3 /8" x 6 Spl. PTO 93477955 5.0 (Star) 3 /4" x 20 Spl. PTO 93450795 5.0 (Star) 3 /8" x 6 Spl. PTO 93460795 5.0 (Star) 3 /8" x 6 Spl. PTO 93470795 5.0 (Star) 3 /8" x 2 Spl. PTO 3005000 (4 per kit) Drivelines TRACTOR YOKE IMPLEMENT YOKE OVERALL DRIVELINE PTO 4507948 3 /8" x 6 Spl. 3 /8" x 6 Spl. 48" PTO 450795 3 /8" x 6 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO 4507955 3 /8" x 6 Spl. 3 /8" x 6 Spl. w/clamp 55" PTO 4507960 3 /8" x 6 Spl. 3 /8" x 6 Spl. 60" PTO 457955 3 /8" x 6 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO 4607948 3 /8" x 2 Spl. 3 /8" x 6 Spl. 48" PTO 460795 3 /8" x 2 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO 4607955 3 /8" x 2 Spl. 3 /8" x 6 Spl. w/clamp 55" PTO 4607960 3 /8" x 2 Spl. 3 /8" x 2 Spl. 60" PTO 467955 3 /8" x 2 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO 4627955 3 /8" x 2 Spl. 3 /8" x 2 Spl.w/Clamp 55" PTO 4637955 3 /8" x 2 Spl. 3 /8" x 2 Spl.w/Pinhole 55" PTO 470795 3 /4" x 20 Spl. 3 /4" x 20 Spl.w/Clamp 5" PTO 4707955 3 /4" x 20 Spl. 3 /4" x 6 Spl.w/Clamp 55" PTO 477955 3 /4" x 20 Spl. 3 /4" x 20 Spl.w/Clamp 55" PTO 4727955 3 /4" x 20 Spl. 3 /8" x 2 Spl.w/Clamp 55" PTO 4737955 3 /4" x 20 Spl. 3 /4" x 2 Spl.w/Pinhole 55" (Order implement yoke and cross & bearing kit separately as required.)

PTO PARTS AND COMPONENTS APPLICATIONS NORTH AMERICAN REPLACEMENT DRIVELINES CONSTANT VELOCITY 8-27 Flexwing Mower Replacement Drivelines SERIES CATEGORY TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO 450555 55 6 3 /8" x 6 Spl. 3 /4" x 20 Spl. 5" PTO 460555 55 6 3 /8" x 2 Spl. 3 /4" x 20 Spl. 5" PTO 470555 55 6 3 /4" x 20 Spl. 3 /4" x 20 Spl. 5" PTO 4505555 55 6 3 /8" x 6 Spl. 3 /8" x 6 Spl. 55" PTO 4605555 55 6 3 /8" x 2 Spl. 3 /8" x 6 Spl. 55" PTO 4705555 55 6 3 /4" x 20 Spl. 3 /8" x 6 Spl. 55" PTO 455555 55 6 3 /8" x 6 Spl. 3 /4" x 20 Spl. 55" PTO 465555 55 6 3 /8" x 2 Spl. 3 /4" x 20 Spl. 55" PTO 475555 55 6 3 /4" x 20 Spl. 3 /4" x 20 Spl. 55" Round Baler Drivelines SERIES CATEGORY TRACTOR YOKE IMPLEMENT YOKE PTO 4503500 35 5 3 /8" x 6 Spl. PTO 4603500 35 5 3 /8" x 2 Spl. PTO 450350 35 5 3 /8" x 6 Spl. PTO 4503502 35 5 3 /8" x 6 Spl. 3 /8" x 6 Spl. with 8,000 in-lb. Friction Clutch 3 /8" x 6 Spl. with 0,000 in-lb. Friction Clutch 3 /8" x 2 Spl. with 5,000 in-lb. Friction Clutch 3 /8" x 6 Spl. with 5,000 in-lb. Friction Clutch OVERALL COMPRESSED DRIVELINE 58" 58" 67" 58" Peanut Harvester Replacement Drivelines SERIES CATEGORY TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO 4625555 55 6 3 /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO 4725555 55 6 3 /4" x 20 Spl. 3 /8" x 2 Spl. 55" PTO 4635555 55 6 3 /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO 4735555 55 6 3 /4" x 20 Spl. 3 /8" x 2 Spl. 55"

8-28 PTO PARTS AND COMPONENTS METRIC REPLACEMENT DRIVELINES CONSTANT VELOCITY Flexwing Mower Replacement Drivelines SERIES TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO 450795 2580 3 /8" x 6 Spl. 3 /4" x 20 Spl. 5" PTO 460795 2580 3 /8" x 2 Spl. 3 /4" x 20 Spl. 5" PTO 470795 2580 3 /4" x 20 Spl. 3 /4" x 20 Spl. 5" PTO 4507955 2580 3 /8" x 6 Spl. 3 /8" x 6 Spl. 55" PTO 4607955 2580 3 /8" x 2 Spl. 3 /8" x 6 Spl. 55" PTO 4707955 2580 3 /4" x 20 Spl. 3 /8" x 6 Spl. 55" PTO 457955 2580 3 /8" x 6 Spl. 3 /4" x 20 Spl. 55" PTO 467955 2580 3 /8" x 2 Spl. 3 /4" x 20 Spl. 55" PTO 477955 2580 3 /4" x 20 Spl. 3 /4" x 20 Spl. 55" Peanut Harvesters SERIES TRACTOR YOKE CLAMP-STYLE IMPLEMENT YOKE OVERALL COMPRESSED DRIVELINE PTO 4627955 2580 3 /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO 4727955 2580 3 /4" x 20 Spl. 3 /8" x 2 Spl. 55" PTO 4637955 2580 3 /8" x 2 Spl. 3 /8" x 2 Spl. 55" PTO 4737955 2580 3 /4" x 20 Spl. 3 /8" x 2 Spl. 55"

PTO PARTS AND COMPONENTS 8-29 80 CV'S FOR FLEX-WING CUTTERS - DOMESTIC & METRIC CONSTANT VELOCITY Interchanges with BUSH HOG - Model #: 265, 365 Also fits other competitive models. DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO 4505555 3 /8" x 6 Spline 55" 3 /8" x 6 Spline 55 PTO 4605555 3 /8" x 2 Spline 55" 3 /8" x 6 Spline 55 PTO 4705555 3 /4" x 20 Spline 55" 3 /8" x 6 Spline 55 SERIES PTO 4507955 3 /8" x 6 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 PTO 4607955 3 /8" x 2 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 PTO 4707955 3 /4" x 20 Spline 55" 3 /8" x 6 Spline BP 8/WS 2580 Interchanges with RHINO - Model #: SR-5, SE-5 DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO 450555 3 /8" x 6 Spline 5" 3 /4" x 20 Spline 55 PTO 460555 3 /8" x 2 Spline 5" 3 /4" x 20 Spline 55 PTO 470555 3 /4" x 20 Spline 5" 3 /4" x 20 Spline 55 SERIES PTO 450795 3 /8" x 6 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 PTO 460795 3 /8" x 2 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 PTO 470795 3 /4" x 20 Spline 5" 3 /4" x 20 Spline BP 8/WS 2580 Interchanges with DEERE - Model #: 57, 58, 208 Also fits other competitive models. DOMESTIC METRIC CV OVERALL TRACTOR YOKE IMPLEMENT COMPRESSED CLAMP YOKE PTO 455555 3 /8" x 6 Spline 55" 3 /4" x 20 Spline 55 PTO 465555 3 /8" x 2 Spline 55" 3 /4" x 20 Spline 55 PTO 475555 3 /4" x 20 Spline 55" 3 /4" x 20 Spline 55 SERIES PTO 457955 3 /8" x 6 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580 PTO 467955 3 /8" x 2 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580 PTO 477955 3 /4" x 20 Spline 55" 3 /4" x 20 Spline BP 8/WS 2580

8-29 A PTO PARTS AND COMPONENTS WING DRIVE FRICTION CLUTCH The Wing Drive Friction Clutch is indispensable in certain agricultural implement applications. The friction clutch is the only torque limiter to continuously transmit power while overloaded. This is valuable during start up of high inertia machines, as well as for leveling out torsional fluctuations due to high cyclic loads. During overload the clutch limits transmitted power. The patented design dissipates heat quickly, improving durability while protecting the machine. Performance Benefits Implement overload protection. Dissipates heat minimizing downtime for higher productivity. Corrosion resistant friction discs. Optimized design affords more reliable torque setting. Minimal maintenance. Smooth operation, no damaging torque spikes. Torque transmission while slipping aids in dislodging plugs for increased productivity REPLACEMENT WING DRIVE SHAFTS Machine Specific Shafts for: Shulte, Woods, John Deere, Bush Hog, Rhino/M&W, Kodiak, Land Pride, Bush-Whacker MACHINE SPECIFIC SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO 406656 ByPy 6 PTO 406664 ByPy 6 PTO 46664 ByPy 6 PTO 426664 ByPy 6 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/8" x 2 Clamp x 3/8" x 2 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/8" x 6 Clamp Fric. Cl. 5,000 in lbs. 56." 5,000 in lbs 64." 5,000 in lbs 64." M&W-A45; AGI 5 ft. Flexwing; Rhino - FR5, SR5 5 ft. Rotary Cutter; Landpride - RC555, RC655 5 ft. Mower; Woods - BW80 Flexwing Schulte - XH500 Flexwing; Bush Hog - 255, 2720 Flexwing; Deere - HX5; Kodiak - Ol' Grizz 5 ft Schulte - FX26; Deere - 58, 208 5,000 in lbs 64." Bush-Whacker -T-80 For inner profile tube replacement for all of the above order PTO 4006745 45.0mm (5.4 Wall) mm REPLACEMENT FRICTION CLUTCH USED ON DRIVELINE PTO 5668620 406656 PTO 5668620 406664 PTO 566862 46664 PTO 5668606 426664 FRICTION CLUTCH REPLACEMENT PARTS PTO 9875000 Spring PTO 970700 Disc High Performance Friction Clutch specially developed for demanding field conditions for wing drives on flex wing and multiple disc mowers.

PTO PARTS AND COMPONENTS 8-29 B REPLACEMENT WING DRIVE SHAFTS Check outboard yokes for correct hook up. Verify overall compressed length. Utilizes standard open spring friction clutch. ALL PURPOSE SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO 406660 ByPy 6 PTO 40666 ByPy 6 PTO 46660 ByPy 6 3/8" x 6 Q.D. x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Q.D. x 3/4" x 20 Clamp Fric. Cl. 3/8" x 6 Q.D. x 3/8" x 2 Clamp Fric. Cl. NOTE: Replacement shafts may differ from original equipment shafts. 5,000 in lbs = 700 Nm & 3,200 in lb = 500 Nm 3,200 in lbs 6.5" Bush Hog - Various Models 3,200 in lbs 63.8" Bush Hog - Various Models 3,200 in lbs 6.5" Bush Hog - Various Models REPLACEMENT SPRING FRICTION CLUTCH USED ON DRIVELINE PTO 5608620 406660 PTO 5608620 40666 PTO 560862 46660 REPLACEMENT PART AVAILABILITY: PTO 970460 Disc REPLACEMENT WING DRIVE SHAFTS Machine Specific Shafts for: Shulte, Woods, John Deere, Bush Hog, Rhino/M&W, Kodiak, Land Pride, Bush-Whacker ALL PURPOSE SHAFTS INTERCHANGES WITH BONDIOLI & PAVESI SERIES DESCRIPTION TORQUE RATING COMP. OAL APPLICATION PTO 404456 44 PTO 404464 44 PTO 44464 44 PTO 424464 44 REPLACEMENT FRICTION CLUTCH USED ON DRIVELINE PTO 5664420 404456 PTO 5664420 404464 PTO 566442 44464 PTO 5664406 424464 FRICTION CLUTCH REPLACEMENT PARTS PTO 9875000 PTO 970700 Spring Disc 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/4" x 20 Clamp Fric. Cl. 3/8" x 2 Clamp x 3/8" x 2 Clamp Fric. Cl. 3/4" x 20 Clamp x 3/8" x 6 Clamp Fric. Cl. 5,000 in lbs. 56." 5,000 in lbs 64." 5,000 in lbs 64." M&W -A45, AGI 5 ft. Flexwing; Rhino - FR5, SR5 5 ft. Rotary Cutter; Landpride RC555, RC655 5 ft. Mower; Woods -BW80 Flexwing Schulte - XH500 Flexwing; Bush Hog - 255, 2726 Flexwing; Deere - HX5; Kodiak - Ol' Grizz 5 ft Schulte - FX26; Deere - 58, 208 5,000 in lbs. 64." Bush-Whacker - T-80 NOTE: Replacement shafts may differ from original equipment shafts. 5,000 in lbs = 700 Nm & 3,200 in lb = 500 Nm High Performance Friction Clutch specially developed for demanding field conditions for wing drives on flex wing and multiple disc mowers.

8-30 PTO PARTS AND COMPONENTS 80 CV ROUND BALER DRIVELINES CONSTANT VELOCITY Gehl Deluxe - Model # 2880 PTO 4503567-80 CV D/L - 3 /8 x 6 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 87352 - - 3 /8 x 2 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 450350 Deere - Model # 467 & 466 PTO 4503558-80 CV D/L - 3 /8 x 6 Tractor Yoke PTO 5908000-9" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4503500 Deere - Model # 567 & 566 (000 RPM) PTO 4603558-80 CV D/L - 3 /8 x 2Tractor Yoke PTO 5900000-9" Clutch Pak PTO 873506 - - 3 COMPLETE D/L /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit PTO 4603500 PARTS FOR TORQMASTER CLUTCH SPRING 7" CLUTCH 9" CLUTCH PTO 9879000 PTO 9872000 PTO 9875000 PTO 9878000 SEPARATOR PLATE PTO 9890000 PTO 9895000 PTO 9898000 7" CLUTCH 9" CLUTCH PTO 9907000 PTO 9909000 DISC 7" CLUTCH 9" CLUTCH PTO 9707000 PTO 9709000 Case - Model # 8455S & 8455T - (540 RPM) PTO 4503558-80 CV D/L - 3 /8 x 6 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4503502 Vermeer - Model # 604K - (540 RPM) PTO 4503558-80 CV D/L - 3 /8 x 6 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4503502 Hesston - Model # 555S & 555T - (540 RPM) PTO 4503558-80 CV D/L - 3 /8 x 6 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4503502 (000 RPM) PTO 4603558-80 CV D/L - 3 /8 x 2 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L (000 RPM) (000 RPM) PTO 4603502 PTO 4603558-80 CV D/L - 3 /8 x 2 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4603502 PTO 4603558-80 CV D/L - 3 /8 x 2 Tractor Yoke PTO 5705000-7" Clutch Pak PTO 873506 - - 3 /8 x 6 Clutch Yoke PTO 2003500-35 Series Cross Kit COMPLETE D/L PTO 4603502

PTO PARTS AND COMPONENTS 8-3 DEALER STARTER KITS North American Starter Kit North American & Metric Starter Kit PTO 2006000 PTO 200600 Contains of each of the following: PTO 5506000 PTO 5709000 PTO 5702000 PTO 873506 PTO 87406 PTO 8253522 DESCRIPTION Domestic 5" Clutch Pak (6,000 in. lbs.) Domestic 7" Clutch Pak (9,000 in. lbs.) Domestic 7" Clutch Pak (2,000 in. lbs.) Domestic 35 Series 3 /8" x 6 Spl. Clamp Yoke Domestic 4 Series /8" x 6 Spl. Clamp Yoke Domestic 35 Series 3 /8" Round with keyway & 2 setscrews TORQMASTER Promotional Poster Contains of each of the following: PTO 5506000 PTO 5709000 PTO 5702000 PTO 873506 PTO 87406 PTO 8253522 PTO 878406 DESCRIPTION Domestic 5" Clutch Pak (6,000 in. lbs.) Domestic 7" Clutch Pak (9,000 in. lbs.) Domestic 7" Clutch Pak (2,000 in. lbs.) Domestic 35 Series 3 /8" x 6 Spl. Clamp Yoke Domestic 4 Series /8" x 6 Spl. Clamp Yoke Domestic 35 Series 3 /8" Round with keyway & 2 setscrews Metric ByPy 4 Series/Walterscheid 2300 Series 3 /8" x 6 Spline Clamp Yoke PTO 8256522 Metric ByPy 5 Series 3 /8" Round with keyway & 2 setscrews TORQMASTER Promotional Poster

8-32 PTO PARTS AND COMPONENTS 80 CONSTANT VELOCITY DRIVELINE with innovative and patented features exclusive to Weasler... Features ARTICULATED GUARD SYSTEM cv centre housing accommodates a bell that fits within minimum ASAE tractor master sheild. Bell is articulated to allow a full 80. The plastic guard over the CV joint is supported by a bearing that rides on the centre housing. The steel guard incorporates a field proven bearing system that significantly reduces wear and increases the life of guard components. TELESCOPING DRIVELINE The Weasler CV driveline utilizes shafts that telescope into a hardened sleeve with a large grease reservoir. Reduced friction means low thrust, for minimal wear throughout CV life. Tested in contaminated environments. LONG LIFE Compact, heavy duty centre housing has a large capacity grease cavity and unique lubrication system. Patented grease system ensures positive one shot lubrication of hardened and ground centering balls and sockets. Unique centre slider support plates greatly increase life by retaining lubrication and sealing out contaminants. Full surface contact means reduced wear on all components, minimizing vibration. HIGH TORSIONAL STRENGTH The exclusive ball and socket of the Weasler CV is integral with the yoke. Trunnions on the centre plate are supported directly in the yoke by the ball and socket, providing strength for heavy-duty applications. Forged yokes and centre housing are engineered for high torque. Benefits Constant Velocity Drivelines allow turns at high angles under full power without damaging the driveline or other components. When using conventional drivelines, the vibrations increase as the angle increases. A CV driveline will substantially reduce vibrations due to its operating at a constant speed. The reduction in vibration will result in fewer breakdowns and lower cost of implement maintenance. Applications Listed are some applications of CV drivelines: Round Balers Square Balers Orchard Sprayers Batwing Mowers Manure Pumps Beet Toppers Rock Pickers Stalk Choppers Box-type Manure Spreaders Tank-type Manure Spreaders Mower Conditioners

PTO PARTS AND COMPONENTS 8-33 TORQMASTER CLUTCHES CLUTCHES NORTH AMERICAN Weasler 4, 35, 44, 55 Interchanges with: Neapco 2600 Series and Walterscheid 480 Series METRIC Interchanges with: Bondioli and Pavesi 4, 5, 6 and 8 Series and Walterscheid 2300, 2400 and 2500 Series (For use on implement end of driveline only) The drawing illustrates the components of the TORQMASTER. Each component of the exploded view is identified by an eight-digit stock number to ensure identification. Number Identification Examples: 570-9000 Torque in lbs Diameter of Clutch Pak 82-406 6 Spline 4 Series Auto-Lok for Overrunning Clutch Implement Yoke 87-3506 6 Spline 35 Series Clamp Yoke for Friction Clutch Implement Yoke 88-8406 6 Spline ByPy 4 Series and W/S 2300 Series Interchanges with both ByPy and W/S Clamp Yoke for Overrunning Clutch Implement Yoke 825-4422 */6th increments. 3 /8" Round Bore* 44 Series Round Bore for Friction Clutch Implement Yoke 970-7000 990-7000 Diameter of Clutch Pak Friction Disc Diameter of Clutch Pak Separator Plate NOTE: Overrunning Clutch Paks must be mated with Overrunning Yokes.

8-34 PTO PARTS AND COMPONENTS TORQMASTER - FEATURES AND BENEFITS CLUTCHES Superior performance. Long life. Isolates/dissipates heat. "User Friendly" - easy to service. Free motion - ease of hook-up. Minimum adjustment required. Auto-Lok available. Replacement clutch for most farm implements.* Torque setting from 9,000 in lbs to 2,000 in lbs. Overrunning feature also available. Modular construction covers a wide variety of applications. Applications for the TorQmaster Modular Clutch: Spreaders Mixers Mower Conditioners Rotary Cutters Flail Shredders Grain Carts Balers Snowblowers For use on implement end of driveline only. INSTRUCTIONS FOR ORDERING THE CLUTCH Determine the driveline series using Transparency Identification System for either North American or Metric applications (See Pages 9 and 53). Identify the connecting shaft size and the method of attachment (ex: clamp, bolt, keyway). Obtain torque setting from owner/operator manual - if available. If torque setting is not available, use the following Clutch Pak Selection Guide (Pages 36 and 37) as a guideline for selecting the proper clutch pak. Order clutch yoke and clutch pak separately by stock number. For installation, attach lutch yoke to the driveline first, then mount the clutch pak to the clutch yoke. Use the modular clutch on the implement end of the driveline only. If the implement input connection guard is removed for service, re-install the guard before using the machine. Some implements (ex: mower conditioner, flail shredder) require an overrunning feature incorporated into the clutch. If the replacement clutch requires this feature, order the appropriate overrunning modular clutch and overrunning clutch yoke.

PTO PARTS AND COMPONENTS 8-35 ASSEMBLY INSTRUCTIONS CLUTCHES FOR MODULAR CLUTCH RUN-IN OF THE TORQMASTER MODULAR CLUTCH (Instructions) If the clutch has not been operated for () season we recommend the following: TOOLS REQUIRED: () /2" box wrench or socket.. Make sure the tractor is off and the PTO is disengaged. 2. Disconnect the driveline from the tractor. 3. Locate the bolts on the O.D. of the clutch pak. Loosen the bolts until all are finger tight, then tighten each one half a turn. 4. Attach the implement to the tractor at the hitch pin, and the driveline to the tractor PTO. 5. Turn the tractor on. Engage the PTO clutch and run for a few seconds, or until the clutch visibly smokes. 6. Disengage the tractor PTO and shut off the tractor. Keep clear of the machine until all parts stop moving. 7. Disconnect the driveline from the tractor. 8. Tighten the bolts on the O.D. of the clutch pak until the compression plate is in full contact with the housing. 9. If the clutch contains an integral overrunning clutch, make sure the clutch spins freely in one direction.

8-36 PTO PARTS AND COMPONENTS TORQMASTER CLUTCH PAK SELECTION GUIDE CLUTCHES Spreader Mower Conditioner FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE CAPACITY: Less than 240 Bushels or 50 cu.ft. 000 RPM IN LB TORQUE PTO 5702000 PTO 572000 2000 - CAPACITY: Between 24-400 Bushels or 5-250 cu.ft. PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 - CAPACITY: Between 40-560 Bushels or 25-350 cu.ft. PTO 5705000 PTO 575000-5000 PTO 5708000 PTO 578000 8000 - CAPACITY: Greater than 560 Bushels or 350 cu.ft. PTO 5708000 PTO 578000-8000 PTO 5708000 PTO 578000 8000 - Mixer FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE CAPACITY: Less than 240 Bushels or 50 cu.ft. 000 RPM IN LB TORQUE PTO 5702000 PTO 572000 2000 - CAPACITY: Between 24-400 Bushels or 5-250 cu.ft. PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 - CAPACITY: Between 40-560 Bushels or 25-350 cu.ft. PTO 5705000 PTO 575000-5000 PTO 5708000 PTO 578000 8000 - CAPACITY: Greater than 560 Bushels or 350 cu.ft. PTO 5708000 PTO 578000-8000 PTO 5708000 PTO 578000 8000 - Snowblowers FRICTION CLUTCH 540 RPM IN LB TORQUE WIDTH OF CUT: Less than 60" 000 RPM IN LB TORQUE PTO 5702000-2000 PTO 5705000 5000 - WIDTH OF CUT: 6" - 70" PTO 5705000-5000 PTO 5708000 8000 - WIDTH OF CUT: 7" - 80" PTO 5708000-8000 PTO 5708000 8000 - WIDTH OF CUT: 8" - 90" PTO 5708000 N/A 8000 WIDTH OF CUT: Greater than 90" PTO 5708000 N/A 8000 FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE SICKLE BAR: Less than 0 feet 000 RPM IN LB TORQUE PTO 5702000 PTO 572000 2000 - SICKLE BAR: 0-3 feet PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 - SICKLE BAR: 4-7 feet PTO 5705000 PTO 575000-5000 PTO 5708000 PTO 578000 8000 - FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE ROTARY DISC: Less than 0 feet 000 RPM IN LB TORQUE PTO 5702000 PTO 572000-2000 ROTARY DISC: - 3 feet PTO 5705000 PTO 575000-5000 ROTARY DISC: 4-7 feet PTO 5708000 PTO 578000-8000 Rotary Cutter Clutch/Machine FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE DECK WIDTH: 4-7 feet 000 RPM IN LB TORQUE PTO 5709000 PTO 579000-9000 PTO 5702000 PTO 572000 2000 - DECK WIDTH: 8-3 feet PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 - DECK WIDTH: 4-6 feet PTO 5705000 PTO 575000-5000 PTO 5708000 PTO 578000 8000 - DECK WIDTH: 7-20 feet PTO 5708000 PTO 578000-8000 PTO 5708000 PTO 578000 8000 - DECK WIDTH: Larger than 20 feet PTO 5708000 PTO 578000-8000 SECTION WIDTH: 4-6 feet PTO 5709000 PTO 5709000-9000 PTO 5702000 PTO 572000 2000 - SECTION WIDTH: Greater than 6 feet PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 -

PTO PARTS AND COMPONENTS 8-37 TORQMASTER CLUTCH PAK SELECTION GUIDE CLUTCHES Flail Shredder FRICTION CLUTCH OVERRUNNING CLUTCH Less than 0 feet 540 RPM IN LB TORQUE 000 RPM IN LB TORQUE PTO 5705000 PTO 575000-5000 PTO 5708000 PTO 578000 8000-0 - 5 feet PTO 5708000 PTO 578000-8000 PTO 5708000 PTO 578000 8000 - Greater than 5 feet PTO 5708000 - - 8000 Round Baler *If you have an implement that does NOT appear in the above Clutch Pak Selection Guide, use the following chart as a general guideline for selecting the proper Clutch Pak. NORTH AMERICAN 4 Series 35 Series 44 Series 55 Series METRIC Bondioli & Pavesi 4 Series Walterscheid 2300 Series Bondioli & Pavesi 5 Series Walterscheid 2400 Series Bondioli & Pavesi 6 & 7 Series Walterscheid II Series Bondioli & Pavesi 8 Series Walterscheid 2500 & 2600 Series PTO 5702000 PTO 5705000 PTO 5708000 PTO 5708000 *See Page 34 for Clutch Pak ordering information. FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE BALE WEIGHT: Less than 600 lbs. 000 RPM IN LB TORQUE PTO 5702000 PTO 572000 2000 - BALE WEIGHT: 600-500 lbs. PTO 5702000 PTO 572000-2000 PTO 5705000 PTO 575000 5000 - BALE WEIGHT - 50-2500 lbs. PTO 5702000 PTO 572000-2000 PTO 5708000 PTO 578000 8000 - Clutch Pak Product Information Adjustment detail - 7" and 9" Clutch Paks No spring adjustment required. Tighten bolts to 30 ft-lbs (max). Grain Cart FRICTION CLUTCH OVERRUNNING CLUTCH 540 RPM IN LB TORQUE 000 RPM IN LB TORQUE PTO 5702000 PTO 572000 2000 - Up to 750 Bushels PTO 5705000 PTO 575000 5000 - Above 750 Bushels PTO 5708000 PTO 578000 8000 - You will find some overlap within an implement category in the Clutch Pak Selection Guide. The operator will generally know if he has a heavy duty or light duty application. If in doubt, always protect the driveline...refer to the "general guideline for selecting proper clutch pak" on this page.

8-38 PTO PARTS AND COMPONENTS NORTH AMERICAN SECTION CLUTCH COMPONENTS CLUTCHES TorQmaster Clutch Paks 7" & 9" 4 Series (Cont'd) Round Bore Yoke CLUTCH PAK OVERRUNNING CLUTCH in lbs DIM "A" PTO 5709000 PTO 579000 9000 7" PTO 5702000 PTO 572000 2000 7" PTO 5705000 PTO 575000 5000 7" PTO 5708000 PTO 578000 8000 7" PTO 5900000 PTO 590000 0000 9.36" PTO 5905000 PTO 595000 5000 9.36" PTO 5908000 PTO 598000 8000 9.36" PTO 5902000 PTO 592000 2000 9.36" NOTE: Torqmaster clutch paks must be used with mating Torqmaster yoke that has same flange configuration only. 4 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 87406 PTO 88406 3 /8" x 6 Spl. PTO 8742 PTO 8842 3 /8" x 2 Spl. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW PTO 825420 PTO 826420 /4" Rd. PTO 825422 PTO 826422 3 /8" Rd. 35 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "B" BORE W/ KEYWAY PTO 873506 PTO 883506 3 /8" x 6 Spl. - PTO 87352 PTO 88352 3 /8" x 2 Spl. - PTO 873524 PTO 883524 - /2" Rd. Clamp Yoke Clamp Yoke CLAMP YOKE Auto-Lok Yoke OVERRUNNING CLAMP YOKE PTO 87420 PTO 88420 3 /4" x 20 Spl. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 873520 PTO 883520 3 /4" x 20 Spl. Auto-Lok Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO 820406 PTO 82406 3 /8" x 6 Spl. PTO 820420 PTO 82420 3 /4" x 20 Spl. PTO 82042 PTO 8242 3 /8" x 2 Spl. AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO 8203506 PTO 823506 3 /8" x 6 Spl. PTO 8203520 PTO 823520 3 /4" x 20 Spl. PTO 820352 PTO 82352 3 /8" x 2 Spl.

PTO PARTS AND COMPONENTS 8-39 CLUTCH COMPONENTS CLUTCHES 4 Series (Cont'd) Round Bore Yoke 55 Series Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO 8253520 PTO 8263520 /4" Rd. Dbl. KW - PTO 8253522 PTO 8263522 3 /8" Rd. - PTO 8253524 PTO 8263524 /2" Rd. - PTO 8273528 PTO 8263528-3 /4" Rd. 44 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "A" BORE PTO 875506 PTO 885506 3 /8" x 6 Spl. PTO 87552 PTO 88552 3 /8" x 2 Spl. Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "A" DIM "B" W/KEYWAY PTO 874406 PTO 884406 3 /8" x 6 Spl. - PTO 87442 PTO 88442 3 /8" x 2 Spl. - PTO 874424 PTO 884424 - /2" Rd. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 875520 PTO 885520 3 /4" x 20 Spl. PTO 875527 PTO 885527 3 /4" x 27 Spl. Auto-Lok Yoke Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 874420 PTO 884420 3 /4" x 20 Spl. Auto-Lok Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO 8205506 PTO 825506 3 /8" x 6 Spl. PTO 8205520 PTO 825520 3 /4" x 20 Spl. PTO 820552 PTO 82552 3 /8" x 2 Spl. Round Bore Yoke AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO 8204406 PTO 824406 3 /8" x 6 Spl. PTO 8204420 PTO 824420 3 /4" x 20 Spl. PTO 820442 PTO 82442 3 /8" x 2 Spl. Round Bore Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO 8255522 PTO 8265522 3 /8" Rd. - PTO 8255528 PTO 8265528 3 /4" Rd. - PTO 8275532 N/A - 2" Rd. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SETSCREW DIM "B" BORE W/ 3 /8" PINHOLE PTO 8254420 PTO 8264420 /4" Rd. - PTO 8254422 PTO 8264422 3 /8" Rd. - PTO 8274432 N/A - 2" Rd.

8-40 PTO PARTS AND COMPONENTS METRIC SECTION CLUTCH COMPONENTS CLUTCHES TorQmaster Clutch Paks 7" & 9" Interchanges with: Bondioli & Pavesi 2 Series, Walterscheid 2200 Series Ratchet Clutch CLUTCH PAK OVERRUNNING CLUTCH in lbs DIM "A" PTO 5709000 PTO 579000 9000 7" PTO 5702000 PTO 572000 2000 7" PTO 5705000 PTO 575000 5000 7" PTO 5708000 PTO 578000 8000 7" PTO 5900000 PTO 590000 0000 9.36" PTO 5905000 PTO 595000 5000 9.36" PTO 5908000 PTO 598000 8000 9.36" PTO 5902000 PTO 592000 2000 9.36" NOTE: Torqmaster clutch paks must be used with mating Torqmaster yoke that has same flange configuration only. Interchanges with: Walterscheid 480 Series Neapco 2600 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 872606 PTO 882606 3 /8" x 6 Spl. PTO 87262 PTO 88262 3 /8" x 2 Spl. TYPE W/KEYWAY & CLUTCH SETTING SET SCREW PTO 5708206 Spring Lock 2600 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 3 Series, Walterscheid I Series Ratchet Clutch TYPE CLUTCH SETTING W/KEY- WAY & SET SCREW PTO 5706306 Spring Lock 5300 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Clamp Yoke Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 872620 PTO 882620 3 /4" x 20 Spl. Interchanges with: Walterscheid 480 Series Neapco 2600 Series Round Bore Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE W/KEYWAY & SET SCREW PTO 878406 PTO 888406 3 /8" x 6 Spl. PTO 878420 PTO 888420 3 /4" x 20 Spl. PTO 87842 PTO 88842 3 /8" x 2 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Auto-Lok Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO 8252622 PTO 8262622 3 /8" Rd. AUTO-LOK YOKE OVERRUNNING AUTO- LOK YOKE PTO 8208406 N/A 3 /8" x 6 Spl.

PTO PARTS AND COMPONENTS 8-4 CLUTCH COMPONENTS CLUTCHES Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Interchanges with: Bondioli & Pavesi 5 Series Round Bore Yoke Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO 8258422 PTO 8268422 3 /8" Rd. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Friction Clutch CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 876506 PTO 886506 3 /8" x 6 Spl. PTO 876520* PTO 886520 3 /4" x 20 Spl. PTO 87652 PTO 88652 3 /8" x 2 Spl. *For correct picture please refer to Walterscheid 480 Series PTO 872620 Interchanges with: Bondioli & Pavesi 5 Series Round Bore Yoke TYPE CLUTCH SETTING PTO 5608406 Dbl. Clamp 8000 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Ratchet Clutch ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO 8256522 PTO 8266522 3 /8" Rd. PTO 8256524 PTO 8266524 /2" Rd. Interchanges with: Bondioli & Pavesi 5 Series Friction Clutch TYPE CLUTCH SETTING PTO 5708406 Spring Lock 8000 in-lbs. 3 /8" x 6 Spl. TYPE CLUTCH SETTING PTO 5606506 Dbl. Clamp 8000 in-lbs. 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 4 Series, Walterscheid 2300 Series Interchanges with: Bondioli & Pavesi 5 Series Overrunning Clutch (Free-Wheel Clockwise) Ratchet Clutch (3 & 4 Row) TYPE CLUTCH SETTING PTO 5808406 Spring Lock N/A 3 /8" x 6 Spl. TYPE CLUTCH SETTING PTO 5706506 Spring Lock 8000 in-lbs. 3 /8" x 6 Spl.

8-42 PTO PARTS AND COMPONENTS CLUTCH COMPONENTS CLUTCHES Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Clamp Yoke Overrunning Clutch (Free-Wheel Clockwise) CLAMP YOKE OVERRUNNING CLAMP YOKE DIM "B" BORE W/KEYWAY & SET SCREW PTO 878606 PTO 888606 3 /8" x 6 Spl. - PTO 878620* PTO 888620 3 /4" x 20 Spl. - PTO 87862 PTO 88862 3 /8" x 2 Spl. - PTO 878624 PTO 888624 - /2" Rd. PTO 878628 PTO 888628 3 /4" x 6 Spl. - *For correct picture please refer to Walterscheid 2400 Series PTO 877620. Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Round Bore Yoke TYPE CLUTCH SETTING PTO 5808606 Spring Lock N/A 3 /8" x 6 Spl. Interchanges with: Bondioli & Pavesi 8 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE W/KEYWAY & SET SCREW PTO 876806 PTO 886806 3 /8" x 6 Spl. PTO 87682 PTO 88682 3 /8" x 2 Spl. Interchanges with: Bondioli & Pavesi 8 Series Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/ KEYWAY & SET SCREW PTO 8258622 PTO 8268622 3 /8" Rd. PTO 8258624 PTO 8268624 /2" Rd. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 876820 PTO 886820 3 /4" x 20 Spl. PTO 876828 PTO 886828 3 /4" x 6 Spl. Interchanges with: Bondioli & Pavesi 6 Series, Walterscheid 220 Series Interchanges with: Bondioli & Pavesi 8 Series Friction Clutch Round Bore Yoke TYPE CLUTCH SETTING PTO 5608606 Dbl. Clamp,25 in-lbs. 3 /8" x 6 Spl. ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW PTO 8256822 PTO 8266822 3 /8" Rd.

PTO PARTS AND COMPONENTS 8-43 CLUTCH COMPONENTS CLUTCHES Interchanges with: Walterscheid 2400 Series Interchanges with: Walterscheid 2500 Series Round Bore Yoke Clamp Yoke ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW PTO 8257622 PTO 8267622 3 /8" Rd. PTO 8257628 PTO 8267628 3 /4" Rd. Interchanges with: Walterscheid 2400 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 877906 PTO 887906 3 /8" x 6 Spl. PTO 87792 PTO 88792 3 /8" x 2 Spl. Interchanges with: Walterscheid 2500 Series Clamp Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 877606 PTO 887606 3 /8" x 6 Spl. PTO 87762 PTO 88762 3 /8" x 2 Spl. CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 877920 PTO 887920 3 /4" x 20 Spl. Interchanges with: Walterscheid 2400 Series Clamp Yoke Interchanges with: Walterscheid 2500 Series Round Bore Yoke CLAMP YOKE OVERRUNNING CLAMP YOKE PTO 877620 PTO 887620 3 /4" x 20 Spl. Interchanges with: Walterscheid 2400 Series ROUND BORE YOKE OVERRUNNING ROUND BORE YOKE W/KEYWAY & SET SCREW DIM "B" BORE WITH 3 /8" PINHOLE PTO 8257922 PTO 8267922 3 /8" Rd. - PTO 8257928 PTO 8267928 3 /4" Rd. - PTO 8277932 N/A - 2" Rd. Overrunning Clutch (Free-Wheel Clockwise) TYPE CLUTCH SETTING PTO 5807606 Spring Lock N/A 3 /8" x 6 Spl.

8-44 PTO PARTS AND COMPONENTS CLUTCH COMPONENTS CLUTCHES Universal Friction Clutch Separator Plate 7" and 9" DIM "A" CLUTCH SETTING DIM "B" BORE PTO 5606006 3 /8" x 6 Spl. 8000 in-lbs. 3 /8" x 6 Spl. PTO 5606020 /4" Rd. 8000 in-lbs. 3 /8" x 6 Spl. PTO 5606022 3 /8" Rd. 8000 in-lbs. 3 /8" Rd. PTO 5606606 3 /8" x 6 Spl. 6675 in-lbs. 3 /8" x 6 Spl. PTO 5600622 3 /8" Rd. 8000 in-lbs. 3 /8" x 6 Spl. Friction Disc SEPARATOR PLATE OVERRUNNING SEPARATOR PLATE DIM "A" OD DIM "B" OD PTO 9907000-6.20" - - PTO 997000-6.20" PTO 9909000-8.07" - - PTO 999000-8.07" PTO 5600622 3 /8" Rd. 8000 in-lbs. Overrunning Clutch Repair Kit 7" and 9" 3 /8" x 6 Spl. DIM "A" O.D. PTO 9707000 6.20" PTO 9709000 7.95" PTO 970053 6.02" PTO 970440 5.2" PTO 970460 6.30" PTO 9706000 5.25" PTO 9807000 DIM "A" O.D. () Overrunning Collar (2) Dogs (2) Leaf Springs () Wave Spring () Washer () Retaining Ring () Assembly/Disassembly Instructions Spring 7" and 9" DIM "A" O.D. DIM "B" THICKNESS PTO 9879000 6.88".38" PTO 9872000 6.88".58" PTO 9875000 6.88".69" PTO 9878000 6.88".89" PTO 9890000 8.00".58" PTO 9895000 7.8".69" PTO 9898000 7.87".89" PTO 9892000 7.75".89"

PTO PARTS AND COMPONENTS 8-45 SHEARBOLT CLUTCHES Economical protection of equipment drivelines & gearboxes. Retrofit to existing drivelines. 3 /8" 6 spline female. To Fit Walterscheid AGDRIVE SERIES L R BOLT SIZE TORQUE WILL ADAPT TO AW20 PTO AK2200426 23 mm 42 mm M6 6,800 lbs. Walterscheid 2200 Series AW2 PTO AK420487 33 mm 48 mm M7 0,600 lbs. Walterscheid 2300 Series AW35 PTO AK3500487 36 mm 48 mm M7 0,600 lbs. Walterscheid 2400 Series AW35 PTO AK3500568 36 mm 56 mm M8 6,200 lbs. Walterscheid 2400 Series AW23 PTO AK723056 43 mm 56 mm M0 25,500 lbs. AW24 PTO AK824056 43 mm 56 mm M0 25,500 lbs. AW36 PTO AK360056 43 mm 56 mm M0 25,500 lbs. To Fit Bondioli & Pavesi AGDRIVE SERIES L R BOLT SIZE TORQUE WILL ADAPT TO AB2 PTO AK2200426 23 mm 42 mm M6 6,800 lbs. Bondioli & Pavesi Series AB4 PTO AK420487 33 mm 48 mm M7 0,600 lbs. Bondioli & Pavesi Series 4 AB5 PTO 046506 36 mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 5 AB7N PTO AK723056 43 mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 7 AB8 PTO AK824056 43 mm 56 mm M0 25,500 lbs. Bondioli & Pavesi Series 8 FREEWHEEL (OVERRUNNING) CLUTCHES Allows equipment to coast to a stop reducing shock loads on belts, chains, bearings & drivelines. Lengthens gearbox life & reduces strain on tractor PTO shaft & braking system. Works especially well on equipment utilizing flywheels for centrifugal drive maintenance. 3 /8" x 6 spline female quick detach standard on both units. Standard SHAFT SERIES L HP WILL ADAPT TO AB4 PTO 5808406 49 mm 28 Bondioli & Pavesi Series 4 AW2 PTO 5808406 49 mm 28 Walterscheid Series 2300 AW22 PTO AK22005 57 mm 65 AB6 PTO AK22005 57 mm 65 Bondioli & Pavesi Series 6 AB5 PTO AK50005 57 mm 35 Bondioli & Pavesi Series 5 Standard

8-46 PTO PARTS AND COMPONENTS FRICTION CLUTCHES Provide low maintenance protection for drivelines & gearboxes. Protection to roto tiller rotors & post hole digger augers etc. Two sizes of friction discs fit all models. 8 bolt configuration prevents disc warping & lengthens friction disc life. 3 /8" x 6 spline female coupling is standard. Standard Clamp Bolt Connection STANDARD CLAMP BOLT CONNECTION SHAFT SERIES L TORQUE HP WILL ADAPT TO AW23/AB7 PTO AK72325 54,000 lbs. AW35 PTO AK3525 59,000 lbs. 53 Walterscheid Series 2400 AB7N PTO AK7N200 75 7,600 lbs. 75 Bondioli & Pavesi Series 7 AB5 PTO AK50025 47 7,920 lbs. 47 Bondioli & Pavesi Series 5 Universal Standard QR Connection SHAFT SERIES L TORQUE HP WILL ADAPT TO AB4 PTO AK20Q90 36 7,920 lbs. 35 Bondioli & Pavesi Series 4 MAK-A-KEY STEP KEY STOCK Cold finished. Oversize keystock ground down to A, B-D & C dimensions per tolerances listed below. Use for couplings, gears, sheaves, sprockets, pulleys - anything that keys to a shaft. Available in 2' lengths. Material 08. TYPE DIMENSIONS A B C D WEIGHT lbs./bar HAR 300 3 /6" 3 /32" /8" /6".088 HAR 3003 2 3 /6" 3 /32" /4" /8".66 HAR 3004 2 /4" /8" 5 /6" /8".24 HAR 3006 2 /4" /8" 3 /8" 3 /6".347 HAR 3008 3 /8" 3 /6" 5 /6" 5 /32".406 HAR 30 2 3 /8" 3 /6" /2" /4".680 HAR 305 2 /2" /4" 5 /8" 5 /6".090 See section 4 for pricing. TYPE Tolerances A & C dimensions -.000/+.002 B/D dimensions -.003/+.003 B & D dimensions -.004/+.004 TYPE 2 Tolerances C & A dimensions -.000/+.002 B/D dimensions -.005/+.005 B & D dimensions -.005/+.005

PTO PARTS AND COMPONENTS 8-47 WIDE ANGLE (CV) JOINTS Convert existing equipment to smooth running CV joints. Replace worn CV's with complete balanced units. Not recommended for,000 rpm applications. ⅜" 6 spline female. AGDRIVE SERIES L L TUBE WILL ADAPT TO AG2N PTO AG2002 87 95 AP43 Walterscheld 2300 Outer Profile Tube AG35 PTO AG35002 35 04 AP484 Walterscheld 2400 Outer Profile Tube Parts for Wide Angle CV Joints ITEM SHAFT SERIES REMARKS PTO AG35638 AG35 ⅜" (6) Q.D. 2 PTO 200794 AG2N 27x75x24x9 2 PTO 2007694 AG35 32x76x27x94 4 PTO AG356239 AG35 Fits AP385 tube ITEM SHAFT SERIES REMARKS 2 PTO 2008474 AG2 27x75 3 PTO AG26900 AG2 45 mm O.D. 4 PTO AG2600 AG2 8 mm O.D. 6 PTO AG2690 AG2 45 mm O.D. 7 PTO AG2624 AG2 Fits AP43 tube 8 PTO 508065 AP065 0x65

8-48 PTO PARTS AND COMPONENTS REPLACEMENT CLUTCHES CLUTCHES BALL SHEAR APPLICATIONS: Spreaders, Rotary Cutters, Balers, Grain Carts, Grain Augers, Snowblowers, Forage Blowers BENEFITS: Minimal maintenance; No damaging heat generation for higher productivity; Repeatable overload setting; Smooth disengaged operation - No damaging torque spikes; Can be applied on implement or tractor shaft in North America. RATCHET APPLICATIONS: Hay Tedders, Round Balers BENEFITS: Repeatable overload setting; Torque pulses while slipping aids in dislodging plugs for increased productivity; Minimal maintenance; Audible operator notification; Compact 4" (02 mm) design. UNIVERSAL/FRICTION APPLICATIONS: Mower Conditioners, Rotary Cutters, Balers, Shredders, Snowblowers, Spreaders, Grain Carts, Mixers BENEFITS: Corrosion resistant friction discs; Minimal maintenance; Smooth operation - No damaging torque spikes; Torque carrying capability while slipping aids in dislodging plugs for increased productivity. OVERRUNNING APPLICATIONS: Grain Carts, Spreaders, Mixers, Shredders, Mower Conditioners, Rotary Cutters BENEFITS: Low-Maintenance; Allows intertia from implement to dissipate without putting load back through the tractor or system. TORQMASTER APPLICATIONS: Spreaders, Rotary Cutters, Shredders, Balers, Grain Carts, Snowblowers, Mower Conditioners, Mixers BENEFITS: Implement overload protection; Minimal maintenance; Isolates and dissipates heat - minimizing downtime for higher productivity; Repeatable overload setting; Corrosion resistant friction discs; Torque carrying capability while slipping aids in dislodging plugs for increased productivity.

PTO PARTS AND COMPONENTS 8-49 NORTH AMERICAN & METRIC E-KIT DISPLAY MERCHANDISERS North American P-O-P List of Contents PTO 2002400 QTY. 4 6 6 PTO 200600 PTO 20200 PTO 20400 QTY. 0 2 2 PTO 203500 PTO 204400 PTO 205500 Metric P-O-P List of Contents PTO 2008400 QTY. 4 2 2 2 2 PTO 20654 PTO 206580 PTO 206806 PTO 20755 PTO 207676 QTY. 2 2 2 8 2 PTO 207989 PTO 20826 PTO 208370 PTO 208474 PTO 208692

8-50 PTO PARTS AND COMPONENTS NORTH AMERICAN DRIVELINE COMPONENT DISPLAY MERCHANDISERS PTO 200000 DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 66" floor fixture contains an inventory of driveline components in the most popular sizes. Equivalents are available for most competitive brands. 6 Series QTY. 2 8 2 2 4 2 2 Series QTY. 2 8 2 2 4 2 4 Series QTY. 2 2 8 2 2 2 2 PTO 020606 PTO 2000600 PTO 3000600 PTO 7000600 PTO 800062 PTO 800066 PTO 8000620 PTO 9002548 PTO 920600 PTO 0000648 PTO 000648 PTO 02206 PTO 200200 PTO 300200 PTO 700200 PTO 80026 PTO 800222 PTO 806220 PTO 9002548 PTO 92200 PTO 000248 PTO 00248 PTO 0042 PTO 02406 PTO 200400 PTO 300400 PTO 500400 PTO 70400 PTO 800420 PTO 800422 PTO 802422 PTO 000448 PTO 00448 35 Series QTY. 2 8 2 2 2 PTO 2002000 PTO 023506 PTO 02352 PTO 2003500 PTO 3003500 PTO 5003500 PTO 703500 PTO 8003520 PTO 8003522 PTO 8003524 PTO 803506 PTO 9002548 PTO 92200 PTO 0003548 PTO 003548 DESCRIPTION DISPLAY CENTER Includes the same product as No. 200000, plus an assortment of tubing and shafting in 6' lengths. QTY. 2 2 2 2 PTO 40024 PTO 40068 PTO 400009 PTO 60068 PTO 6002022 PTO 602400 PTO 6023500 Transparency ID System QTY. PTO 2002500 Header Board w/hardware QTY. PTO 200000H

PTO PARTS AND COMPONENTS 8-5 NORTH AMERICAN DRIVELINE COMPONENT DISPLAY MERCHANDISERS 44/55 SERIES 44 Series QTY. 8 2 2 2 2 2 55 Series PTO 024406 PTO 024420 PTO 02442 PTO 2004400 PTO 3004400 PTO 5004400 PTO 704400 PTO 8004422 PTO 8004424 PTO 8004428 PTO 804406 PTO 9023548 PTO 924400 PTO 2004000 DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 56" floor fixture contains an inventory of high horsepower driveline components in the most popular sizes. Equivalents are available for most competitive brands. QTY. 2 4 2 2 PTO 025506 PTO 025520 PTO 02552 PTO 2005500 PTO 3005500 PTO 3025500 PTO 705500 PTO 8005522 PTO 8005524 PTO 8005528 PTO 8005532 Locking Repair Kits QTY. Shafting QTY. PTO 3002006 PTO 3002020 PTO 300202 PTO 404002 PTO 4042720 PTO 6044400 Transparency ID System QTY. PTO 2004500 Header Board w/hardware QTY. PTO 2000004H

8-52 PTO PARTS AND COMPONENTS METRIC DRIVELINE COMPONENT DISPLAY Tractor Yoke MERCHANDISERS Outer Profile Yoke QTY. QTY. PTO 02606 PTO 026506 PTO 027606 PTO 028206 PTO 028306 PTO 028406 PTO 028606 PTO 7006236 PTO 7006343 PTO 7006443 PTO 7006552 PTO 7006654 PTO 700724 PTO 7007648 PTO 2008000 DESCRIPTION DISPLAY CENTER The Weasler Display Center is a dealer merchandiser that makes selling easy. Most parts are on display for convenient visual inventory control as well as quick self-service for the customer. The 48" x 66" floor fixture contains an inventory of the most popular sizes, including inner and outer profile tubes. PTO 200800 DESCRIPTION DISPLAY CENTER The display board includes the items depicted by the display photo above. It does NOT include an assortment of inner and outer profile tubes. Lock Yoke Repair Kit QTY. PTO 30062 PTO 300738 Cross & Bearing Kit QTY. 2 2 2 2 2 2 2 2 4 2 PTO 200654 PTO 2006580 PTO 2006806 PTO 200755 PTO 2007676 PTO 2007989 PTO 200826 PTO 2008370 PTO 2008474 PTO 2008692 Inner Profile Yoke QTY. Roll Pin QTY. PTO 300626 PTO 3006229 PTO 3006336 PTO 3006436 PTO 3006545 PTO 3006645 PTO 3007234 PTO 3007639 PTO 5080850 PTO 5080860 PTO 5080880 PTO 508060 PTO 508065 PTO 508075 PTO 508080 PTO 508090 Implement Yoke QTY. Guard QTY. 2 PTO 800650 PTO 8008208 PTO 800820 PTO 800830 PTO 800840 PTO 80084 PTO 80270 PTO 80276 PTO 8028435 PTO 9002548 PTO 9023548 Bearing Kit (2 per kit) QTY. PTO 965005 PTO 965029 PTO 962502 PTO 962534 PTO 963525 PTO 963567 Transparency ID System QTY. PTO 2008500

PTO PARTS AND COMPONENTS 02/203 8-53 PTO LOCKING PINS PTO 2266 PTO 2273 DESCRIPTION Westward Agri-Pak containing 2-5/6" shaft locking pins Westward Agri-Pak containing 2 - ⅜" shaft locking pins PTO ADAPTORS PTO 25 PTO 252 PTO 253 PTO 254 PTO 255 PTO 256 PTO 3742 PTO 4465 ADAPTOR TYPE FEMALE SPLINE Ø F MALE SPLINE Ø M INCREASES PTO SHAFT BY OVERALL WEIGHT (KG) PTO 25 Universal Reducer 3 /8" x 6 /8" x 6 2 7 /8" 73 mm 5 3 /8" 36 mm 0.76 PTO 252 Long Increaser /8" x 6 3 /8" x 6 2 3 /4" 70 mm 4 3 /4" 2 mm 0.64 PTO 253 Short Increaser /8" x 6 3 /8" x 6 /32" 34 mm 3 3 /6" 8 mm 0.27 PTO 254 Ext. Adaptors 3 /8" x 6 3 /8" x 6 7" 78 mm 9 7 /6" 240 mm.6 PTO 255 Extension Adaptor 3 /8" x 6 3 /8" x 6 4" 02 mm 5 3 /4" 46 mm 0.93 PTO 256 2 Spline Adaptor 3 /8" x 2 3 /8" x 6 3 /2" 89 mm 6 /8" 56 mm 0.94 PTO 3742 Bolt Type 3 /8" x 6 3 /8" x 2 4 3 /4" 2 mm 6 /2" 65 mm.45 PTO 4465 Bolt Type 3 /4" x 6 3 /8" x 6 5" 27 mm 7 7 /8" 200 mm 2.85 Note: There is no warranty on PTO adaptors. Special PTO Adaptor Quick Release Adaptor PTO 4895 PTO 4896 PTO 4897 DESCRIPTION " Round with 540 rpm (6 spline) /8" Round with 540 rpm (6 spline) /4" Round with 540 rpm (6 spline) PTO 4900 PTO 490 DESCRIPTION 7 /8" Round (A) with 540 rpm (6 spline) " Round (A) with 540 rpm (6 spline) PTO 4898 3 /8" Round with 540 rpm (6 spline) PTO 4899 /2" Round with 540 rpm (6 spline) Note: There is no warranty on PTO adaptors.

8-54 PTO PARTS AND COMPONENTS PTO ADAPTORS General Purpose Pump Adaptor DESCRIPTION FEMALE SPLINE Ø F Ø A Ø B OVERALL WEIGHT (KG) PTO 498 5 /8" Round with 540 rpm (6 spline) 3 /8" 35 6 5 /8" 6 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.82 PTO 4982 3 /4" Round with 540 rpm (6 spline) 3 /8" 35 6 3 /4" 9 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.78 PTO 4983 7 /8" Round with 540 rpm (6 spline) 3 /8" 35 6 7 /8" 22 mm 3 /8" 35 mm 4 5 /8" 7.5 mm 0.74 PTO 4984 " Round with 540 rpm (6 spline) 3 /8" 35 6 " 25 mm /2" 38 mm 4 5 /8" 7.5 mm 0.66 Note: There is no warranty on PTO adaptors. HEAVY DUTY PTO ADAPTORS PTO 590 PTO 5903 PTO 5865 PTO 5907 PTO 5904 PTO 5866 PTO HD844 PTO 844 PTO 8443 FEMALE SPLINE Ø F MALE SPLINE Ø M QUICK RELEASE BOLT TYPE SET SCREW INCREASES PTO SHAFT BY OVERALL 3 /8" x 6 3 /8" x 6 PTO 590 PTO 5902 4 5 /6" 0 mm 6 /2" 65 mm.40 3 /8" x 6 3 /8" x 2 PTO 5903 PTO 5904 4 3 /4" 2 mm 6 /2" 65 mm.45 3 /8" x 2 3 /8" x 6 PTO 5865 PTO 5866 4 5 /6" 0 mm 6 /2" 65 mm.45 3 /8" x 2 3 /8" x 2 PTO 5907 4 3 /4" 2 mm 6 /2" 65 mm.50 3 /4" x 20 3 /8" x 6 PTO 8443* 5" 27 mm 3 /4" x 20 3 /8" x 2 PTO 844* 5" 27 mm 7 3 /8" ØC=2 9 /6" 7 3 /8" ØC=2 9 /6" 87 mm ØC=65 mm 87 mm ØC=65 mm 3 /4" x 20 3 /8" x 2 PTO HD844 5 /2" 40 mm 7 7 /8" 200 mm 3.0 3 /4" x 20 3 /8" x 6 PTO HD8443 5" 27 mm 7 7 /8" 200 mm 2.95 *Supplied with 2 grubscrews & locknuts. Note: There is no warranty on PTO adaptors. WEIGHT (KG).6.80

PTO PARTS AND COMPONENTS 8-55 PTO ADAPTERS Sleeve Increasers FEMALE SPLINE Ø F MALE SPLINE Ø M OVERALL (A) WEIGHT (KG) PTO 249 /8 x 6 3 /8 x 6 2 3 /6" 56 mm 0.0 PTO 250 /8 x 6 3 /8 x 6 7 /8" 48 mm 0.08 PTO 249 PTO 250 Note: There is no warranty on PTO adaptors. Splined Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE EXTENDS PTO SECURED BY PTO 0332-00084 25 mm - 8 3 /8-6 4 5 /8" 3 /4" Cross Pin PTO 0332-0353* /8-6 3 /8-6 5 /2" 3 9 /6" Cross Pin PTO 0332-0354+ /8-6 3 /8-6 5 9 /6" 4 /8" Cross Pin PTO 0332-00375* /8-6 3 /8-6 0 /2" 8 3 /6" Cross Pin PTO 0332-00377* /8-6 /8-6 5 /2" 3 3 /4" Cross Pin PTO 0332-00400* 3 /8-6 /8-6 6 /2" 4 9 /6" Cross Pin PTO 0332-00420* 3 /8-6 /8-6 5 /8" 2 3 /6" Cross Pin PTO 0332-0037* 3 /8-6 3 /8-6 6 /2" 4 9 /6" Cross Pin PTO 0332-00378* 3 /8-6 3 /8-6 5 /8" 2 5 /6" Cross Pin PTO 0332-00373 3 /8-2 3 /8-6 6 /2" 4 /2" Setscrew PTO 0332-00070 3 /8-2 3 /4-20 7" 5" Setscrew PTO 0332-0040 3 /4-6 3 /8-6 6 /2" 4 3 /4" Cross Pin PTO 0332-00406 ⅝ - 6 ⅜ - 6 6½ 4¾ Cross Pin Capacity to operate on tractors rated to 75 PTO HP. Provide a means of connecting two dissimilar splines. Welded steel construction for added strength. PARCO-LUBRICATED rust preventative finish. Cross pins or setscrews furnished. PTO 0332-0353 **Fits John Deere Model 400, Ariens (New Holland) Model S6 and Bollens Models HT-8 and HT-20. +Split Hub for Bolt Clamping. *Includes PTO Pins. Note: There is no warranty on PTO adaptors.

8-56 PTO PARTS AND COMPONENTS PTO ADAPTERS Splined Adaptors - To 25 H.P. Capacity to operate on tractors rated to 25 PTO HP. Developed for long and rugged use. Alloy steel, heat treated for extra strength. Withstands high shock loads from tractor or implement. PARCO-LUBRICATED rust preventative finish. FEMALE SPLINE MALE SPLINE EXTENDS PTO SECURED BY PTO 0332-0000 3 /8-2 3 /8-2 6 7 /8" 4 3 /6" Setscrew PTO 0332-00002 3 /8-2 3 /8-6 6 7 /8" 4 3 /6" Setscrew PTO 0332-00004 3 /8-6 3 /8-2 6 7 /8" 4 3 /6" Setscrew PTO 0332-00005 3 /8-6 3 /8-6 6 7 /8" 4 3 /6" Setscrew PTO 0332-0000 Kwik-D-Tach Spline Adaptors - To 75 H.P. PTO 0332-0000 FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-0000 3 /8-6 3 /8-6 6 /2" 4 5 /6" PTO 0332-0003 3 /8-6 3 /8-2 6 /2" 4 5 /6" PTO 0332-0005 3 /8-6 /8-6 6 /2" 4 5 /6" PTO 0332-0373 3 /8-2 3 /8-6 6 /2" 4 5 /6" PTO 0332-022 3 /8-2 3 /8-2 6 /2" 4 5 /6" PTO 0332-00086 Repair Kit Capacity to operate on tractors rated to 75 PTO H.P. Patented Quick Release device. New PTO Quick Release concept - Spring Loaded - rotates about 30 by hand for quick release. Dependable operation - no sticking pins - always easily operated. No sharp edges, protrusions, pins or other interferences to injure operators. Splined Adaptors - To 75 H.P. FOR TRACTORS WITH 3 /4-20 SPLINE PTO FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-00020 3 /4-20 3 /8-6 8 3 /6" Setscrew PTO 0332-0476 ¾ - 20 ⅜ - 6 8 3 /6" Clamp PTO 0332-0477 ¾ - 20 ⅜ - 2 8 3 /6" Clamp PTO 0332-00020 *For applications using our standard 0332-00020 and 0332-002 adaptors where heavy overhung load is a factor such as PTO mounted pumps, etc. PTO 0332-00077 Note: There is no warranty on PTO adaptors.

PTO PARTS AND COMPONENTS 8-57 PTO ADAPTERS Forged PTO Adaptors - To 25 H.P. FOR TRACTORS WITH 3 /4-20 SPLINE PTO FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-0490 ¾ - 20 3 /8-6 8 3 /6" Clamp Type PTO 0332-049 ¾ - 20 3 /8-2 8 3 /6" Clamp Type *For applications using our standard 0332-00088 and 0332-00089 adaptors where heavy overhung load is a factor such as PTO mounted pumps, etc. Forged PTO Adaptors - To 75 H.P. "Forged" internal spline. Universal quick-detach slot and bolt holes - can be used with any American, British or European PTO system. Furnished with 5 /6 x /6" spring pin for direct connection to PTO. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-0008 /8-6 3 /8-6 3" /8 Push-Pin Type PTO Adaptors - to 75 H.P. QUICK RELEASE EXTENSION ADAPTOR FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-00092 3 /8-6 3 /8-2 7 5 /6" 5 5 /6" PTO 0332-0375 3 /8-2 3 /8-6 7 5 /6" 5 /8" PTO 0335-9020 Repair Kit Round Shaft Adaptors - To 75 H.P. FEMALE ROUND KEYWAY MALE SPLINE EXTENDS SHAFT PTO 0332-00376 " /4" 3 /8" - 6 5 /6" 3 /4" PTO 0332-00430 /8" /4" 3 /8" - 6 5 /6" 3 3 /6" PTO 0332-0043 /4" /4" 3 /8" - 6 5 /6" 3 3 /6" PTO 0332-00432 3 /8" 5 /6" 3 /8" - 6 5 /6" 3 3 /6" PTO 0332-00433 /2" 3 /8" 3 /8" - 6 6 9 /32" 4" PTO 0332-00376 Note: There is no warranty on PTO adaptors.

8-58 PTO PARTS AND COMPONENTS PTO ADAPTERS Clamp Type PTO Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 0332-0354 /8-6 3 /8-6 7 5 /6" 4 5 /8" PTO 0332-00057 3 /8-6 3 /8-6 7 5 /6" 4 5 /8" PTO 0332-0374* 3 /8-6 3 /8-6 3 /4" 0 9 /6" PTO 0332-00087 3 /8-2 3 /8-6 7 5 /6" 5 5 /6" *For tractor mounted pumps with spline bore. PTO 0332-00057 Sleeve Type Splined Adaptors - To 75 H.P. FEMALE SPLINE MALE SPLINE SPECIAL APPLICATIONS PTO 0332-00355 3 /32-0 3 /8-6 2 /4" IHC Cub & Kubota PTO 0332-00352 /8-6 3 /8-6 2 /4" PTO 0332-00363 /8-6 3 /8-6 2" Replaces Ford 23082 PTO 0332-00403 3 /8-6 3 /4-6 2 /2" PTO 0332-00352 OVER-RUNNING COUPLERS Hub City over-running couplers provide a safe way to protect operators and machinery where inertia of driven units (ie. rotary mowers, balers, hay conditioners, etc.) can over-run driving source. They take the push out of the driven machine and eliminate the chance of broken or twisted PTO shafts. Over-running couplers drive solidly from tractor to driven implement, but over-run smoothly when implement exceeds PTO speeds. Kwik-D-Tach Tractor Models - To 25 H.P. Capacity to operate on tractors to 25 PTO H.P. New PTO quick release concept - spring loaded - rotates about 30 by hand for quick release. Designed to operate with,000 rpm PTO's. Installation and lubrication instruction enclosed with each coupler. Patent pending. FEMALE SPLINE MALE SPLINE EXTENDS PTO PTO 033-0000 3 /8-6 3 /8-6 7 5 /6" 4 3 /6 PTO 033-000 3 /8-6 3 /8-2 7 3 /6" 4 /6 PTO 033-0002 3 /8-2 3 /8-6 7 5 /6" 5 5 /6 PTO 033-0003 3 /8-2 3 /8-2 7 3 /6" 5 3 /6 PTO 0337-0026 Repair Kit Note: There is no warranty on PTO adaptors.

PTO PARTS AND COMPONENTS 8-59 PTO ADAPTERS Tractor Models - to 75 HP Over-Running Couplers covered by Patent No. 3,233,47 - Canadian Patent No. 727-982 All steel welded housing Heat treated alloy steel inner sleeve. Hardened steel keys, spring loaded. Snap ring construction for quick, easy disassembly for cleaning and service. Spring roll pin for quick mounting to tractor. Convenient grease fitting for gun lubrication. Designed to operate with,000 RPM P.T.O.'s. Shipping weight 6 lbs. PART NUMBER FEMALE SPLINE MALE SPLINE EXTENDS TRACTOR P.T.O. SHAFT END SHAFT RETAINING GROOVE PTO 033-00690 ⅛ - 6 ⅛ - 6 6 2 /32" 4 5 /32 4 /32 PTO 033-00670 ⅛ - 6 ⅜ - 6 6 2 /32" 4 5 /32 4 /32 PTO 033-00680 ⅜ - 6 ⅛ - 6 6 2 /32" 4 5 /32 4 /32 PTO 033-00660 ⅜ - 6 ⅜ - 6 6 2 /32" 4 5 /32 4 /32 PTO 0337-00076 Repair Kit FITS TRACTOR All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford All with Cross Pin Hole Including Ford Installation and lubrication instructions enclosed with each coupler. Utility Models - to 75 HP Same construction as Standard-Duty Tractor Models. For those applications other than tractor P.T.O. shafts, where the driven shaft overruns the driver occasionally or where one shaft must override or idle part of the time. Operating speed to,000 RPM. Shipping weight 6 lbs. FEMALE SPLINE MALE EXTENSION ¼ Rd., ¼ KW ¼ Rd., ¼ KW PTO 033-0065 Repair Kit PTO 0337-00076 Installation and lubrication instructions enclosed with each coupler. Note: There is no warranty on PTO adaptors.

8-60 PTO PARTS AND COMPONENTS PTO ADAPTERS Universal Models - To 75 H.P. Same construction as Standard-Duty Tractor Models. Universal flange for mounting sheave or sprocket, has six ⅜ holes equally spaced on 4½ Bolt Circle. Flange O.D. 5 - Hub O.D. 2¾ Operating speed to,000 RPM. Shipping Weight 6 lbs. FEMALE SLEEVE I.D. TYPE ¼ Round w/¼ keyway PTO 033-00600 ⅜ Round w/5/6 keyway PTO 033-00607 Repair Kit PTO 0337-00082 SPLINED COUPLINGS Splined Couplings SPLINED SIZE O.D. PTO 0332-00336 3 /4-6 3 /8" 2 /2" PTO 0332-00337 7 /8-6 3 /8" 2 /2" PTO 0332-00340* 3 /32-0 3 /8" 2 3 /4" PTO 0332-00338 - 0 3 /8" 2 /2" PTO 0332-0034 - 6 3 /8" 2 3 /4" PTO 0332-00344 /8-6 9 /6" 2 3 /4" PTO 0332-00342 /4-6 7 /8" 3 /4" PTO 0332-00348 /4-0 3 /4" 3 3 /4" PTO 0332-00345 3 /8-6 3 /4" 3 3 /4" PTO 0332-00365 3 /8-0 3 /4" 3" PTO 0332-00349 5 /8-6 2 3 3 /4" PTO 0332-00347 /2-6 7 /8" 3 3 /4" PTO 0332-00367 /2-0 7 /8" 3" PTO 0332-00346 3 /4-6 2 /4" 3 3 /4" PTO 0332-00345 PTO 0332-00346 Note: There is no warranty on PTO adaptors.

PTO PARTS AND COMPONENTS 8-6 PTO ADAPTERS Involute Splined Couplings NO. OF SPLINES SPLINE DESCRIPTION SPLINE O.D. COUPLING O.D. COUPLING PTO 0332-00027 9 6/32 DP 30 PT 0.625" 3 /8" 2" PTO 0332-00066 6/32 DP 30 PT 0.750" 3 /8" 2" PTO 0332-00028 3 6/32 DP 30 PT 0.875" 3 /8" 3" PTO 0332-00043 5 6/32 DP 30 PT.000" /2" 3" PTO 0332-00029 4 2/24 DP 30 PT.250" 3 /4" 3" PTO 0332-00350 2 6/32 DP 30 PT.375" 3 /4" 3" PTO 0332-00320 20 2/24 DP 30 PT.750" 2 /4" 3 3 /4" PTO 0332-00030 3 8/6 DP 30 PT.750" 2 /4" 3 3 /4" PTO 0332-0035 27 6/32 DP 30 PT.750" 2 /4" 3" Splined Shafts Extension Shafts SIZE SPLINE PTO 0332-00390 " 6 0" PTO 0332-0039 /8" 6 0" PTO 0332-00392 /4" 6 0" PTO 0332-00393 /4" 0 0" PTO 0332-00394 3 /8" 6 0" PTO 0332-00396 /2" 6 0" PTO 0332-00397 5 /8" 6 0" PTO 0332-00398 3 /4" 6 0" SIZE SPLINE PTO 0332-00356 3 /8" - 6 3 /8" - 6 9" PTO 0332-00357 3 /8" - 6 /8" - 6 9" Involute Splined Shafts NO OF SPLINES SPLINE DESCRIPTION SPLINE O.D. SHAFT PTO 0332-00023 9 6/32 DP 30 PA 0.625" 6" PTO 0332-00024 3 6/32 DP 30 PA 0.875" 6" PTO 0332-00044 5 6/32 DP 30 PA.000" 8" PTO 0332-00025 4 2/24 DP 30 PA.250" 0" PTO 0332-00395 2 6/32 DP 30 PA.375" 0" PTO 0332-00038 6 0/20 DP 30 PA.7000" 0" PTO 0332-00026 3 8/6 DP 30 PA.750" 0" PTO 0332-00399 27 6/32 DP 30 PA.750" 0" PTO 0332-00039 6 8/6 DP 30 PA 2.25" 0" Note: There is no warranty on PTO adaptors.

8-62 PTO PARTS AND COMPONENTS SPLINED SHAFTS Splined Shafts PTO 0332-00358 PTO 0332-00359 PTO 0332-0009 DESCRIPTION /8-6 Spline, 5 /4" Long 3 /8-6 Spline, 5 /2" Long 3 /8-2 Spline, 5 /2" Long WELD-ON ADAPTORS Quick Release Weld-Ons Square Bushing Weld-Ons PTO 0332-0350 PTO 0332-0345 DESCRIPTION 3 /8-2 Spline, 3 5 /6" Long 3 /8-6 Spline, 3 5 /6" Long I.D. O.D. PTO 0332-00360 7 /8 & " Square 3 /4" 2 /4" PTO 0332-00362 /8" Square 2" 2 /2" PTO 0332-00364 /4" Square 2 /4" 2 /2" COUPLINGS & SPLINED HUBS Round Bore Couplings BORE SIZE KEYWAY O.D. PTO 0332-00380 3 /4" 3 /6" /2" 2 3 /4" PTO 0332-0038 7 /8" 3 /6" /2" 2 3 /4" PTO 0332-00382 " /4" 3 /4" 2 3 /4" PTO 0332-00383 /6" /4" 3 /4" 2 3 /4" PTO 0332-00384 /8" /4" 2" 3" PTO 0332-00385 3 /6" /4" 2" 3" PTO 0332-00386 /4" /4" 2" 3" PTO 0332-00387 5 /6" 5 /6" 2" 3" PTO 0332-00388 3 /8" 5 /6" 2 /8" 3" PTO 0332-00389 7 /6" 3 /8" 2 /8" 3" PTO 0332-00379 /2" 3 /8" 2 /4" 3" Use to join two shafts. Repair pulleys, gears, sprockets, etc. O.D. and I.D. concentricity not held to close limits - If precision O.D. and I.D. concentricity is required, Not drilled for setscrews.

PTO PARTS AND COMPONENTS Nov. 203 8-63 COUPLINGS & SPLINED HUBS Spline Bore Couplings NO. OF SPLINES SPLINE DESCRIPTION SPLINE O.D. HUB O.D. PTO 0332-0003 6 6B Str. Side.000" 2.00/2.000" 3 /4" PTO 0332-00085 8.25 Module 20 PA 0.984".75/.750" 3 /4" PTO 0332-00032 9 6/32 DP 30 PA 0.625".25/.250" /4" PTO 0332-0007 6/32 DP 30 PA 0.750".50/.500" /2" PTO 0332-00033 3 6/32 DP 30 PA 0.875".50/.500" /2" PTO 0332-00072 5 6/32 DP 30 PA.000".75/.750" 3 /4" PTO 0332-00035 2 6/32 DP 30 PA.375" 2.25/2.250" 2 /8" PTO 0332-00073 23 6/32 DP 30 PA.500" 2.25/2.250" 2 /8" PTO 0332-00075 27 6/32 DP 30 PA.750" 3.00/3.000" 2 /4" PTO 0332-00034 4 2/24 DP 30 PA.250" 2.25/2.250" 2" PTO 0332-00036 6 0/20 DP 30 PA.700" 2.75/2.750" 2 /4" PTO 0332-00074 3 8/6 DP 30 PA.750" 3.00/3.000" 2 /4" PTO 0332-00037 6 8/6 DP 30 PA 2.25" 3.50/3.500" 2 3 /32" PTO 0332-00093 7 2/24 DP 30 PA.500" 2.25/2.250 2¼" PTO PUMP DRIVE ADAPTORS Kwik-D-Tach Splined Pump Drive Adaptors Same safe, dependable fast action release as Kwik-D-Tach Splined Adaptors FEMALE SPLINE FEMALE ROUND* KEYWAY PTO 0332-0004 PTO 0332-0002 3 /8-6 0.625" 3 /6 x 3 /32" 4 3 /32" PTO 0332-0004 3 /8-6 0.750" 3 /6 x 3 /32" 4 3 /32" PTO 0332-000 3 /8-6 0.875" 3 /6 x 3 /32" 4 3 /32" PTO 0332-00040 3 /8-6 0.937" /4 x /8" 4 3 /32" PTO 0332-0006 3 /8-6.000" /4 x /8" 4 3 /32" PTO 0332-0007 3 /8-6.25" /4 x /8" 4 3 /32" *Nominal +0.002 Note: There is no warranty on PTO adaptors.

8-64 PTO PARTS AND COMPONENTS PTO PUMP DRIVE ADAPTORS Splined Pump Drive Adaptors PTO Pin included with all /8-6 Spline and 3 /8-6 Spline Pump Drives 3 /8-2 Spline and 3 /4-27 Spline Pump drives are supplied with Setscrews. FEMALE SPLINE FEMALE ROUND* KEYWAY PTO 0332-0042 3 /8-6.000" /4 x /8" 3 /8" PTO 0332-00407 3 /8-6 0.625" 3 /6 x 3 /32" 4 /32" PTO 0332-00408 3 /8-6 0.750" 3 /6 x 3 /32" 4 /32" PTO 0332-00409 3 /8-6 0.875" 3 /6 x 3 /32" 4 /32" PTO 0332-0043 3 /8-6 0.937" /4 x /8" 4 /32" PTO 0332-0040 3 /8-6.000" /4 x /8" 4 /32" PTO 0332-004 3 /8-6.25" /4 x /8" 4 /32" PTO 0332-00607 3 /8-2 0.625" 3 /6 x 3 /32" 4 3 /8" PTO 0332-00608 3 /8-2 0.750" 3 /6 x 3 /32" 4 3 /8" PTO 0332-00609 3 /8-2 0.875" 3 /6 x 3 /32" 4 3 /8" PTO 0332-0062 3 /8-2 0.937" /4 x /8" 4 3 /8" PTO 0332-0060 3 /8-2.000" /4 x /8" 4 3 /8" *Nominal +0.002 PTO 0332-00408 Note: There is no warranty on PTO adaptors.

PTO PARTS AND COMPONENTS 8-65 AGRI-HUB BEVEL GEAR DRIVES Dimensions A B C D E F G H I J PTO AG30AB.750.749 3 /6 x 3 /32 KW.29*.50.29.50 5.9 7.0.9 2.3 PTO AG40AB.000.999 /4 x /8 KW.53 2.00.53 2.00 5.72 8.9 2.47 2.84 PTO AG60AB.375.374 5 /6 x 5 /32 KW.8 2.50.8 2.50 8.4.26 2.85 3.38 PTO AG80AB.375.374 5 /6 x 5 /32 KW 2.3 3.06 2.3 3.00 0.88 4.73 3.85 4.54 PTO AG00AB.750.749 3 /8 x 3 /6 KW 2.25 3.00 2.25 3.00 3.00 7.6 4.6 5.26 *.25 effective keyway on AG30, 2/ straight bevel ratio. K L M N O P R S V W X PTO AG30AB.438 2.875.563 3.25 5 /6-8UNC-2B 0.63 3.97 7.94.83 3.625.44 PTO AG40AB 2.25 4.250 2.25 4.250 3 /8-6UNC-2B 0.69 5.09 0.8 2.063 4.25 N/A PTO AG60AB 2.250 4.500 2.250 4.500 /2-3UNC-2B 0.8 6.3 2.25 2.84 5.628 N/A PTO AG80AB 3.250 6.500 3.250 6.500 /2-3UNC-2B.00 7.9 5.82 4.094 8.88 N/A PTO AG00AB 4.000 8.000 4.000 8.000 /2-3UNC-2B 0.75 9.4 8.28 4.750 9.500 N/A Dimensions subject to change without notice. NOTE: Specify ratio when ordering: i.e. -,.5-, 2- Standard Styles Available: - Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL 00 540 000 750 AG30 2.52 9.92 8.07 30.05 AG40 3.50 6.00 26.50 40.00 AG60 5.25 29.25 50.00 78.00 AG80 6.25 70.00 20.00 75.00 AG00 25.56 00.00 62.75 248.00.5- Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL 00 540 000 750 AG30.6 4.75 7.25.25 AG40.85 6.75.25 6.75 AG60 3.25 3.25 22.75 38.50 AG80 9.27 39.30 68.50 2.00 AG00 2.83 9.68 5.98 237.9 2- Ratio Maximum Input Horsepower INPUT (PINION) RPM MODEL 00 540 000 750 AG30 0.80 3.32 5.88 9.50 AG40.25 5.50 9.25 4.75 AG60 2.50.75 9.75 3.00 AG80 5.75 25.75 45.00 7.00 AG00 2.00 50.00 85.00 30.00