Mechanical Level Switches

Mechanica Leve Switches SOR mechanica eve switches are rugged, industria products specificay designed for versatiity of appication. This cataog contains appication and ordering data for foat and dispaceroperated eve switches. Switches are avaiabe with fanged or seaed chambers or as insertion modes. Options avaiabe for each type of switch incude: switch type and number, housing type, chamber materia, process connections, accessories, and more. Units may be customized to suit customers needs. Inside this cataog you wi find soutions to your eve sensing puzzes. SOR mechanica eve switches have many configurations avaiabe. If you don t see what you need, we wi engineer a soution for your appication. Features and Benefits Fiveyear warranty ASME Section IX and AWS D2.1 quaified weding system Designed to ANSI/ASME B31.1 and B31.3 guideines Hermeticay seaed switching mechanisms avaiabe Stainess stee switching mechanisms Hightemperature capabiity Wide variety of exposionproof housings Versatie switching mechanisms which retrofit into other manufacturers units Wordwide istings and certifications Quick wordwide deivery Ony ASTM grade materias with certified mi test reports used Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches 300 Top Mounted Foat 700 Series Top Mounted Dispacer 100 Series Fanged Chamber Foat 200 Series Seaed Chamber Foat 208 Steam Trap Foat 400 Series Side Mounted Foat 2/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Tabe of Contents Section Page Principes...4 Features and Benefits...6 How to Order...8 Foat Switches 100 Series Fanged Externa Cage... 9 200 Series Seaed Externa Cage... 14 108/208 Series Steam Condensate Externa Cage... 18 300 Series Top Insertion Mount... 20 400 Series Side Insertion Mount... 23 Dispacer Switches Modes 741743, 801, and 802 Fanged Externa Cage... 26 Modes 740, 803, and 804 Seaed Externa Cage... 30 700 Series SingeStage Top Insertion Mount... 33 730 Series DuaStage Top Insertion Mount... 36 750 Series TripeStage Top Insertion Mount... 40 Switching Mechanisms... 44 Switch Ratings... 47 Housings... 48 Accessories Compatibiity Chart... 49 Test Certificates... 50 High Temperature Seection... 51 CY and CZ Option Inspection Requirements... 55 MC and TC Options... 56 ASTM Materia Designations... 57 Reference Charts Specific Gravity of Water... 58 Conversions... 59 Weights... 60 Registered Quaity System to ISO 9001:2008 3/60

Mechanica Leve Switches Principes FoatOperated Leve Switches Mode Series 100, 200 and 300 The foat rides on the process iquid surface, precisey tracking iquid surface motion. Rising iquid eve ifts the foat, siding the attraction seeve up inside the encosing tube and into the magnetic fied to actuate the eectrica or pneumatic switch (signaing iquid presence). Subsequenty, faing iquid eve owers the foat, drawing the attraction seeve out of the magnetic fied to deactuate the eectrica or pneumatic switch (signaing iquid absence). Foattype eve switches are generay abe to hande hightemperature appications, and sometimes prove usefu for cose interface detection. Foats can operate up to three switching eements. Independent switching eves may be obtained with tandem foats. Consut the factory for specia foatswitching arrangements. Actuated Switching Eement Common Normay Open Normay Cosed Pivot Bias Spring Magnet Attraction Seeve Encosing Tube Foat Leve Differentia Deactuated FoatOperated Leve Switches Mode Series 108/208 and 400 The foat rides on the process iquid surface, precisey tracking iquid surface motion. Rising iquid eve ifts the foat via a pivot mechanism, siding the attraction seeve down inside the encosing tube and out of the magnetic fied to deactuate the eectrica or pneumatic switch (signaing iquid presence). Subsequenty, faing iquid eve owers the foat, drawing the attraction seeve into the magnetic fied to actuate the eectrica or pneumatic switch (signaing iquid absence). Foattype eve switches are generay abe to hande hightemperature appications. Switching Eement Actuated Magnetic Fied Engaged C Common NC Normay Cosed NO Normay Open Switching Eement Deactuated Magnetic Fied Disengaged C Common NC Normay Cosed NO Normay Open Attraction Seeve Up Counterweight Bias Spring Encosing Tube Attraction Seeve Down Bias Spring Encosing Tube Leve Differentia 4/60 Actuated Deactuated Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Principes DispacerOperated Leve Switches Mode Series 700, 730, 740, 750 and 800 Dispacer contros offer aternative features to the foatoperated contro. The sensor is a weight (dispacer), heavier than the iquid, that is suspended by a spring. When iquid contacts the dispacer, a buoyancy force is produced, which causes the effective weight of the dispacer to change. This causes the spring to retract sighty to a new equiibrium position. When the spring retracts, the attraction seeve aso moves upward into the fied of the externa magnet, thus overcoming the force of the bias spring and actuating the switching eement. This principe provides for narrow or wide switching differentia, and aows switching point ateration by moving the dispacer(s) up or down the suspension cabes. Dispacers may be arranged in combinations of narrow and wide differentia to operate up to three switching stages. Dispacer contros operate under higher pressure conditions than foatoperated switches. Actuated Switching Eement Common Normay Open Normay Cosed Pivot Bias Spring Magnet Attraction Seeve Encosing Tube Extension Spring Suspension Rod / Cabe Dispacer Leve Differentia Deactuated Registered Quaity System to ISO 9001:2008 5/60

Mechanica Leve Switches Features and Benefits Features and Benefits Genera Rugged carbon stee or stainess stee construction Fiveyear manufacturer s warranty Quick, wordwide deivery A ASTM materias (see page 57) Quaity management system is registered to ISO9001:2000 Standard Chamber Materias A SOR eve switch chambers are constructed using ASTM grade materias with fu materia certification. Mi Test Reports are kept on fie for a raw materias. Copies are avaiabe upon request at the time of order pacement. Carbon Stee Construction Chamber Center Section Fanges/Wed Fittings Wed Cap Studs/Nuts A106 Grade B A105 A234WPB A193B7/A1942H Stainess Stee Construction Chamber Center Section Fanges/Wed Fittings Wed Cap Studs/Nuts A312TP316/316L A182316/316L A403316/316L A193B7/A1942H Gaskets A standard modes are provided with a Nitrie binder composite gasket that is seected for its resistance to hydrocarbons and steam. For hightemperature, highpressure or NACEconstructed units, a spirawound gasket is used with woundaround Grafoi. Extreme highpressure mode 802 uses a softiron, ringjoint gasket on the chamber head fange. Interna Trim A sensing eements (foats and dispacers) are constructed of either 316/316LSS or porceain as a minimum. Attraction seeves are avaiabe in 400SS as a standard, with 316/316LSS or other exotic metas as an option. A other wetted interna parts are or better. Dispacer springs are made of Incone 600. 6/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Features and Benefits Features and Benefits Switching Mechanisms SOR switching mechanisms are designed for use in punishing industria conditions. A stainess stee construction no auminum or brass. Temperature ratings avaiabe from 65 F ( 54 C) to 1000 F (538 C) on dry, non condensing services. Condensing service (steam) temperature ratings avaiabe up to 800 F (427 C), and up to 1200 F (649 C) with protection (see page 52). Avaiabe switching mechanisms incude hermeticay seaed, standard open contacts, or pneumatic contacts. Agency istings are avaiabe on most switch mechanisms: UL, CSA, ATEX or SAA (Austraia). Switch Housings A SOR switch housings are made from rugged castings. Materias are copperfree auminum or cast iron. A wide range of exposionproof ratings and agency istings are avaiabe. Quaity Assurance SOR maintains a high eve of quaity throughout our corporation. Many quaity assurance features are buit into our products. ISO 9001 certified engineering design and production system (certified since 1993). Leveweded chambers designed to the guideines of ASME B31.1 and B31.3 (inspection certificate avaiabe see page 55). A weders and wed procedures are quaified and maintained to ASME Section IX. A ASTM grade materias used Certified Mi Test Reports required on a raw materias. Product Support SOR has a futime engineering staff dedicated to soving your mechanica eve switch probems. Engineers and technicians are knowedgeabe about saes and production techniques, and are dedicated to providing the best soution to our customers at the best price. Registered Quaity System to ISO 9001:2008 7/60

Mechanica Leve Switches How to Order Mode Number System 101 AA1CBA1N4CRTT Mode Series Chamber Materia Process Connection Interna Switch Housing Accessories Trim Mechanism Materia The eve switch mode number is divided into seven sections that individuay specify the components of an SOR eve switch. This diagram iustrates the mode number arrangement. Seect the component designators from the appropriate pages of this brochure. Standard components and ratings are highighted throughout the brochure for ease of use. Each section incudes a vaid mode number at the top of each isting of component designators. The position of the designator isted beow it wi be shown in coor for reference. How to Order Steps 1 through 5 are required; Step 6 is optiona. Orders must have compete mode numbers, i.e. each component must have a designator. Step 1: Seect Mode Series based on maximum working pressure and minimum specific gravity. Step 2: Seect Chamber Materia. Step 3: Seect Process Connection. Step 4: Seect Trim Materia. Step 5: Seect Switch Mechanism & Housing. (Pages 44 through 48). Step 6: Seect Accessories as required for service. (Page 49). Page Numbers for Seected Steps Step 100 Series 200 Series 108/208 Series 300 Series 400 Series 741, 743, 802 Series 740, 803 and 804 Series 700 Series 730 Series 750 Series 1 9 14 18 20 23 26 30 33 36 40 2 10 15 18 20 23 26 30 33 36 40 3 10 15 18 21 24 27 31 34 37 41 4 10 15 18 21 24 27 31 34 37 41 5 4448 4448 4448 4448 4448 4448 4448 4448 4448 4448 6 49 49 49 49 49 49 49 49 49 49 Design and specifications are subject to change without notice. For atest revision, see www.. 8/60 Registered Quaity System to ISO 9001:2008

100 Series Step 1: Mode Series 101 AA1CBA1N4CRTT The 100 Series mechanica iquid eve switch is foat operated with a fanged, serviceabe externa chamber. Seect the sensing unit from the foowing charts. Then refer to pages 44 through 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum Working Pressure See page 53 for pressure ratings at higher temperatures. Mode Series Chamber Materia Pressure at Listed Temperature in psid (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 F) 350 F (177 C) 400 F (204 C) 450 F (232 C) 101 285 275 (19.7) (18.9) 260 235 (17.9) (16.2) 230 215 (15.9) (14.8) 215 205 (14.8) (14.1) 200 195 (13.8) (13.4) 185 182 (12.8) (12.6) 102 500 500 (34.5) (34.5) 500 500 (34.5) (34.5) 500 500 (34.5) (34.5) 486 486 (33.5) (33.5) 473 473 (32.6) (32.6) 460 460 (31.7) (31.7) 103 740 720 (51.0) (49.7) 675 620 (46.6) (42.8) 655 560 (45.2) (38.6) 645 537 (44.5) (37.0) 635 515 (43.8) (35.5) 622 497 (42.9) (34.3) 104 990 1000 (68.2) (69.0) 900 1000 (62.0) (69.0) 875 1000 (60.3) (69.0) 860 973 (59.2) (67.1) 845 946 (58.2) (65.2) 822 920 (56.6) (63.4) 109 285 275 (19.7) (18.9) 280 235 (17.9) (16.2) 230 215 (15.9) (14.8) 215 205 (14.8) (14.1) 200 195 (13.8) (13.4) 185 182 (12.8) (12.6) 121 285 275 (19.7) (18.9) 260 235 (15.9) (14.8) 230 215 (15.9) (14.8) 215 205 (14.8) (14.1) 200 195 (13.8) (13.4) 185 182 (12.8) (12.6) 122 350 350 (24.1) (24.1) 350 350 (24.1) (24.1) 350 350 (24.1) (24.1) 340 340 (23.4) (23.4) 331 331 (22.8) (22.8) 322 322 (22.2) (22.2) 123 740 720 (51.0) (49.7) 675 620 (46.6) (42.8) 655 560 (45.2) (38.6) 645 537 (44.5) (37.0) 635 515 (43.8) (35.5) 622 497 (42.9) (34.3) 124 1250 1250 (86.2) (86.2) 1250 1250 (86.2) (86.2) 1250 1120 (86.2) (77.2) 1216 1075 (83.9) (74.1) 1182 1030 (81.5) (71.0) 1150 992 (79.3) (68.2) *Consut the factory for pressure ratings of units with Mone trim. Minimum Specific Gravity For Mone Trim pease consut factory. Mode Series 101 102 103 104 109 121 122 123 124 / 400SS B Trim 0.54 0.63 0.51 0.63 0.38 0.68 0.68 0.95 0.95 Minimum Specific Gravity (Dua Switch, antivibration, pneumatic or extrahigh temperature) (0.65) (0.74) (0.57) (0.69) (0.41) (0.89) (0.89) Standard 0.57 0.67 0.53 0.65 0.39 0.75 0.75 0.99 1.00 A C Trim (0.68) (0.78) (0.59) (0.71) (0.42) (0.96) (0.96) / 400SS B Trim 0.57 0.66 0.54 0.64 0.40 0.74 0.75 1.02 1.02 w/ ET or FE Option A C Trim 0.61 0.70 0.55 0.66 0.41 0.81 0.82 1.07 1.07 Registered Quaity System to ISO 9001:2008 9/60

100 Series Step 2: Chamber Materia 101 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart on page 9 is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Step 3: Process Connection 101 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size 1 Stye NPT Thread Socket Wed Fange 150# 300# 600# VH A1A A1B A1C A1D A1E VV B1C B1D B1E VVD C1A C1B C1C C1D C1E VH (Vertica/Horizonta) VV (Vertica/Vertica) VVT D1C D1D D1E VH A5A A5B A5C A5D A5E 11/2 VV B5C B5D B5E VVD C5A C5B C5C C5D C5E VVT D5C D5D D5E VH A2A* A2B* A2C A2D A2E VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) 2 VV B2C B2D B2E VVD C2A* C2B* C2C C2D C2E VVT D2C D2D D2E *Not avaiabe on Modes 121 and 122. Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Step 4: Trim Materia 101 AA1CBA1N4CRTT Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) 10/60 Registered Quaity System to ISO 9001:2008

100 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. Specific Gravity Mode 101 B C.52 33/16 43/8 1.0 51/4 57/8 Specific Gravity Mode 102 B C.61 25/8 33/4 1.0 47/16 51/16 Specific Gravity Mode 103 B C.51 31/4 37/8 1.0 47/8 51/4 Specific Gravity Mode 104 B C.62 37/16 315/16 1.0 411/16 51/8 Specific Gravity Mode 109 B C.38 411/16 51/4 1.0 75/16 79/16 Specific Gravity Mode 121 B C.66 29/16 41/16 1.0 33/4 43/4 Specific Gravity Mode 122 B C.66 23/8 37/8 1.0 39/16 49/16 Specific Gravity Mode 123 B C.93 23/4 33/4 1.0 31/16 4 Specific Gravity Mode 124 B C.93 213/16 313/16 1.0 21/8 41/16 Registered Quaity System to ISO 9001:2008 11/60

100 Series Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required. Drawing 0390019 Drawing 0390021 Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Note: A process fange nippes are 1 standard. Drawing 0390010 12/60 Registered Quaity System to ISO 9001:2008

100 Series Chamber Dimensions 1 Connection Mode 11/2 Connection 2 Connection D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 101 1611/16 424 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 102 173/8 441 103 1715/16 456 101/4 260 413/16 122 77/16 189 14 356 14 356 37/16 87 104 195/8 498 109 1213/16 325 513/16 148 87/16 214 16 406 16 406 71/2 191 203/8 518 121 175/8 448 9 229 31/4 83 6 152 14 356 14 356 3 76 122 183/16 462 123 173/8 441 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 124 183/4 476 Mode D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 101 1611/16 424 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 102 173/8 441 103 1715/16 456 101/4 260 413/16 122 77/16 189 14 356 14 356 31/2 87 104 195/8 498 109 131/16 332 513/16 147 87/16 214 16 406 16 406 71/2 191 203/8 518 121 175/8 448 9 229 31/4 82 6 152 14 356 14 356 3 76 122 183/16 462 123 173/8 441 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 124 183/4 476 Mode D 1, 2 E 1, 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 101 1711/16 449 101/2 267 37/8 99 61/2 165 14 356 14 356 41/4 108 102 183/8 467 103 1815/16 481 101/4 260 415/16 126 77/16 189 14 356 14 356 47/16 113 104 1913/16 503 109 139/16 344 515/16 151 87/16 214 16 406 16 406 81/2 216 203/8 518 121 175/8 5 448 5 6 152 14 356 14 356 3 5 76 5 122 183/16 5 462 5 123 183/8 467 101/2 267 37/8 99 61/2 165 14 356 14 356 41/4 108 124 193/4 502 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. Registered Quaity System to ISO 9001:2008 13/60

200 Series Step 1: Mode Series 201 AA1CBA1N4CRTT The 200 Series mechanica eve switch is foat operated with a seaed, tamperproof externa chamber. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Mode Chamber Maximum Series Materia Working Pressure See page 53 for pressure ratings at higher temperatures. 201 202 203 204 205 206 207 209 221 Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 225 (15.5) 225 (15.5) 225 (15.5) 219 (15.1) 213 (14.7) 207 (14.3) 300 (20.7) 300 (20.7) 300 (20.7) 292 (20.1) 284 (19.5) 276 (19.0) 500 (34.5) 500 (34.5) 500 (34.5) 486 (33.5) 473 (32.6) 460 (31.7) 1250 (86.2) 1250 (86.2) 1250 1187 (86.2) (81.9) *Consut the factory for pressure ratings of units with Mone trim. 1216 1139 (83.9) (78.6) 1182 1091 (81.5) (75.2) 1150 1052 (79.3) (72.6) 750 (51.7) 750 (51.7) 750 (51.7) 729 (50.3) 709 (48.9) 690 (47.6) 1000 (68.9) 1000 (68.9) 1000 (68.9) 1000 (68.9) 1000 945 1000 945 (68.9) (65.2) (68.9) (65.2) 973 907 973 907 (67.1) (62.6) (67.1) (62.6) 946 869 946 869 (65.2) (59.9) (65.2) (59.9) 920 838 920 838 (63.4) (57.8 (63.4) (57.8 450 (31.0) 450 (31.0) 450 (31.0) 438 (30.2) 426 (29.4) 414 (28.6) 350 (24.1) 350 (24.1) 350 (24.1) 340 (23.4) 331 (22.8) 322 (22.2) Minimum Specific Gravity For Mone Trim pease consut factory. Mode Series 201 202 203 204 205 206 207 209 221 Minimum Specific Gravity (Dua Switch, antivibration, pneumatic or extrahigh temperature) / 400SS B Trim 0.38 0.53 0.62 0.92 0.51 0.65 0.62 0.38 0.66 (0.44) (0.64) (0.73) (0.57) (0.76) (0.68) (0.41) (0.88) Standard 0.40 0.56 0.66 0.98 0.53 0.69 0.64 0.40 0.73 A C Trim (0.46) (0.67) (0.77) (0.59) (0.80) (0.70) (0.42) (0.95) / 400SS B Trim 0.40 0.56 0.65 0.99 0.53 0.69 0.63 0.40 0.73 w/ ET or FE Option A C Trim (0.42) (0.60) (0.69) (1.04) (0.54) (0.72) (0.65) (0.41) (0.80) 14/60 Registered Quaity System to ISO 9001:2008

200 Series Step 2: Chamber Materia 201 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart on this page is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Step 3: Process Connection 201 AA1CBA1N4CRTT Seect a process connection, size, stye and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye NPT Thread Socket Wed Fange 150# 300# 600# VH A1A A1B A1C A1D A1E VH (Vertica/Horizonta) VV (Vertica/Vertica) 1 VV B1C B1D B1E VVD C1A C1B C1C C1D C1E VVT D1C D1D D1E VH A5A A5B A5C A5D A5E 11/2 VV B5C B5D B5E VVD C5A C5B C5C C5D C5E VVT D5C D5D D5E VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) VH A2A* A2B* A2C A2D A2E 2 VV B2C B2D B2E VVD C2A* C2B* C2C C2D C2E VVT D2C D2D D2E *Not avaiabe on Mode 221. Step 4: Trim Materia 201 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Registered Quaity System to ISO 9001:2008 15/60

200 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. High Leve Low Leve Mode 201 Specific Gravity B C.38 35/16 41/8 1.0 53/8 53/4 Mode 204 Specific Gravity B C.92 23/4 33/4 1.0 31/8 4 Mode 207 Specific Gravity B C.61 33/16 33/4 1.0 49/16 415/16 Mode 202 Specific Gravity B C.52 27/8 41/16 1.0 415/16 59/16 Mode 205 Specific Gravity B C.50 31/4 37/8 1.0 415/16 55/16 Mode 209 Specific Gravity B C.38 413/16 53/8 1.0 77/16 711/16 Mode 203 Specific Gravity B C.61 25/8 33/4 1.0 47/16 51/16 Mode 206 Specific Gravity B C.64 311/16 41/2 1.0 47/8 53/8 Mode 221 Specific Gravity B C.66 21/2 4 1.0 33/4 43/4 Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required. Drawing 0390660 Drawing 0390661 Drawing 0390662 Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** Note: A process fange nippes are 1 standard. * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. (Linear = mm/in.) ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. 16/60 Registered Quaity System to ISO 9001:2008

200 Series Chamber Dimensions 1 Connections Mode D 1, 2 E 1, 2 F 4 G H 4 I 1, 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 201 101/4 260 413/16 122 77/16 189 14 356 14 356 37/16 87 175/8 448 202 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 163/4 425 203 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 14 356 204 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 163/4 425 205 206 207 209 101/4 1213/16 260 325 413/16 513/16 122 148 77/16 87/16 189 214 14 16 356 406 14 16 356 406 37/16 71/2 87 191 175/8 203/4 448 527 221 9 229 31/4 83 6 152 14 356 14 356 3 76 133/4 349 11/2 Connections Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 201 101/4 260 413/16 122 77/16 189 14 356 14 356 37/16 87 175/8 448 202 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 163/4 425 203 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 14 356 204 101/2 267 33/4 95 61/2 165 14 356 14 356 31/4 83 163/4 425 205 206 207 209 101/4 131/16 260 332 413/16 513/16 122 147 77/16 87/16 189 214 14 16 356 406 14 16 356 406 37/16 71/2 87 191 175/8 203/4 448 527 221 9 229 31/4 83 6 152 14 356 14 356 3 76 133/4 349 2 Connections Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 201 101/4 260 415/16 126 77/16 189 14 356 14 356 47/16 112.7 185/8 473 202 101/2 267 37/8 99 61/2 165 14 356 14 356 41/4 108 173/4 451 203 101/2 267 37/8 99 61/2 165 14 356 14 356 41/4 108 14 356 204 101/2 267 37/8 99 61/2 165 14 356 14 356 41/4 108 173/4 451 205 206 207 209 101/4 139/16 260 344 415/16 515/16 126 151 77/16 87/16 189 214 14 16 356 406 14 16 356 406 47/16 71/2 113 191 185/8 203/4 473 527 221 6 152 14 356 14 356 3 5 76 5 133/4 349 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. Registered Quaity System to ISO 9001:2008 17/60

108/208 Series Step 1: Mode Series 108 AE1AFA1N4CRTT The 108/208 Series mechanica eve switches are foat operated, horizonta mounted with seaed, tamperproof or fanged, serviceabe chambers. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. See page 52 for pressure ratings at higher temperatures. Mode Series Chamber Materia Pressure at Listed Temperature in psid (bar) 100 F (38 C) 200 F (93 C) 300 F (149 F) 350 F (177 C) 400 F (204 C) 450 F (232 C) 108 740 720 (51.0) (49.6) 675 620 (46.5) (42.7) 655 560 (45.1) (38.6) 645 537 (44.4) (37.0) 635 515 (43.7) (35.5) 622 497 (42.8) (34.2) 208 1857 2248 (128.0) (155.0) 1857 1937 (128.0) (133.5) 1857 1746 (128.0) (120.3) 1857 1644 (128.0) (133.4) 1857 1602 (128.0) (110.4) 1857 1548 (128.0) (106.7) Minimum Specific Gravity For a mode series on this page, singe switch ony is equa to.65. Consut the factory for units used with specific gravity ower than.65. Step 2: Chamber Materia 108 AE1AFA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Seect a process connection stye and size from the chart beow. Consut the factory for variations. NPT connections not recommended above 900 F. Size Stye NPT Thread E1A E1B E5A E5B E2A E2B 1 11/2 2 NPT SW NPT SW NPT SW Step 3: Process Connection 108 AE1AFA1N4CRTT Seect the interna trim materia from the chart beow. Step 4: Trim Materia 108 AE1AFA1N4CRTT Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: F 321 Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony G 321 Stainess Stee 316/316L Stainess Stee A106 Carbon Stee (A) or 316/316L Stainess Stee (C) 18/60 Registered Quaity System to ISO 9001:2008

108/208 Series Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required. Product dimensions undergoing changes. Pease contact the factory for more information. Mode 108 Mode 208 Drawing 0390667 1 Connections Mode 11/2 Connections 2 Connections * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Notes 1. For 316/316L SS Construction: Subtract 3/16 inch (5 mm). 2. For 316/316L SS Construction: Subtract 3/8 inch (10 mm). Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 A B C M20 x 1.5*** inch mm inch mm inch mm 108 43/4 1 121 1 91/2 2 241 2 65/8 168 208A (C.S.) 47/16 113 87/8 225 59/16 141 208C () 43/4 121 91/2 241 65/8 168 Mode A B C inch mm inch mm inch mm 108 413/16 1 122 1 95/8 2 244 2 65/8 168 208A (C.S.) 49/16 116 91/8 232 59/16 141 208C () 47/8 124 93/4 248 65/8 168 Mode Drawing 0390666 A B C inch mm inch mm inch mm 108 415/16 1 125 1 97/8 2 251 2 65/8 168 208A (C.S.) 415/16 125 97/8 251 59/16 141 208C () 51/4 133 101/2 267 65/8 168 Registered Quaity System to ISO 9001:2008 19/60

300 Series Step 1: Mode Series 301 AF1ABA1N4CRTT The 300 series mechanica eve switches are foatoperated switches suitabe for topinsertion mounting. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Mode Series Pressure at Listed Temperature in psid (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 F) 350 F (177 C) 400 F (204 C) 450 F (232 C) 301 225 (15.5) 225 (15.5) 225 (15.5) 219 (15.1) 213 (14.6) 207 (14.2) 303 500 (34.4) 500 (34.4) 500 (34.4) 486 (33.5) 473 (32.6) 460 (31.7) 304 750 (51.7) 750 (51.7) 750 (51.7) 729 (50.2) 709 (48.8) 690 (47.5) *Consut the factory for pressure ratings of units with Mone trim. Minimum Specific Gravity Minimum specific gravity wi be ower for shorter insertion depths. Consut the factory. Mode Series 301 303 304 Insertion Depth 24 48 24 48 24 48 Minimum Specific Gravity Singe Switch (Dua Switch, antivibration, pneumatic or extrahigh temperature) / 400SS Trim (B).40.44.68.75.52.56 (.45) (.49) (.79) (.87) (.58) (.62) A Trim (C).42.46.72.80.55.59 (.48) (.52) (.84) (.91) (.61) (.65) A Mone Trim (M).48.53.82.91.62.67 (.54) (.59) (.93) (1.02) (.68) (.73) *An insertion depth must be suppied at time of order on a 300 Series switches. Seect process connection materia from the foowing chart. Step 2: Process Connection Materia 301 AF1ABA1N4CRTT Designator A C Materia A106 Carbon Stee A182TP316/316L Stainess Stee 20/60 Registered Quaity System to ISO 9001:2008

300 Series Step 3: Process Connection 301 AF1ABA1N4CRTT Seect a process connection, size and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size NPT Thread Seect Designator Fange 150# 300# 600# 1 F1A 2 F2A 3 F3A F3C F3D F3E 4 F4C F4D F4E 6 F6C F6D F6E NPT Mounting Fange Mounting Note: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection, or that the vesse has access to attach the foat from inside the vesse after instrument instaation. See page 26 for foat dimensions. Step 4: Trim Materia 301 AF1ABA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Foat Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Registered Quaity System to ISO 9001:2008 21/60

300 Series Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Standard Units Tandem Foat Units Drawing 0390053 ** See Housing section (page 48). ***M20 adapters are brass. Contact the factory for aternate materias. Series Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 Foat Size W 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 Drawing 0390007 Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. M20 x 1.5*** Series Foat Size Standard Units Minimum Insertion 303 31/2 x 6 114 41/2 301 304 Tandem Foat Units Maximum Insertion mm inch mm inch 51/2 108 41/4 1219 48 High Insertion Low Insertion Differentia Drawing 0390665 Minimum Maximum Minimum Maximum Minimum Maximum mm inch mm inch mm inch mm inch mm inch mm inch 303 31/2 x 6 114 41/2 1016 40 305 12 1219 48 203 8 1105 431/2 301 304 51/2 108 41/4 1041 41 279 11 1219 48 178 7 1111 433/4 Notes 1. Standard Units: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection, or that the vesse has access to attach the foat from inside the vesse after instrument instaation. 2. Tandem Foat Units: It is important to consider the instaation configuration when seecting the process connection. Be sure that the foat wi fit through the process connection. Tandem foats are not removabe and must be instaed through the nozze opening. Operating specific gravity and insertion depths must be specified. 22/60 Registered Quaity System to ISO 9001:2008

400 Series Step 1: Mode Series 401 AG3ABA1N4CRTT The 400 Series mechanica eve switch is foat operated suitabe for horizontainsertion mounting. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum Working Pressure Mode Series 401 402 403 404 Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 230 (15.8) 230 (15.8) 230 (15.8) 224 (15.4) 218 (15.0) 212 (14.6) 350 (24.1) 350 (24.1) 350 (24.1) 340 (23.4) 331 (22.8) 322 (22.2) 230 (15.8) 230 (15.8) 230 215 (15.8) (14.8) 215 205 (14.8) (14.1) 200 195 (13.7) (13.4) 185 182 (12.7) (12.5) 500 (34.4) 500 (34.4) 500 (34.4) 486 (33.5) 473 (32.6) 460 (31.7) 405 740 720 (51.0) (49.6) 675 620 (46.5) (42.7) 655 560 (46.1) (38.6) 645 537 (44.4) (37.0) 635 515 (43.7) (35.5) 618 497 (42.6) (34.2) 406 1250 (86.2) 1250 1240 (86.2) (85.5) 1250 1120 (86.2) (77.2) 1216 1075 (83.8) (74.1) 1182 1030 (81.5) (71.0) 1150 992 (79.3) (68.4) *Consut the factory for pressure ratings of units with Mone trim Minimum Specific Gravity Mode Singe Switch 401.50 402.90 403.50 404.60 405.60 406.60 Note: Insertion depth may affect minimum specific gravity. Step 2: Chamber Materia 401 AG3ABA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings Registered Quaity System to ISO 9001:2008 23/60

400 Series Step 3: Process Connection 401 AG3ABA1N4CRTT Seect a process connection designator from the chart beow based on stye and size. Consut the factory for variations. Mode Foat Size Connection Designator Size Stye 401 3 G3A 3 402 21/2 G7A 21/2 403 3 G3F 3 403 3 G4F 4 404 3 x 6 G3A 3 Step 4: Trim Materia 401 AG3ABA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Chamber Dimensions NPT(M) Thread NPT(M) Thread 150# RF Wed Neck Fange 150# RF Wed Neck Fange NPT(M) Thread Mode Designator Foat Materia Attraction Seeve Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Housing** W Foat Size Connection Designator Size Stye 405 3 x 6 G3G 3 405 3 x 6 G4G 4 406 3 x 6 G3H 3 406 3 x 6 G4H 4 Avaiabe with Chamber Materia: 300# RF Wed Neck Fange 300# RF Wed Neck Fange 600# RF Wed Neck Fange 600# RF Wed Neck Fange B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 Modes 401, 402, 404 Drawing 0390668 Modes 403, 405, 406 Drawing 0390669 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Genera Purpose Exposion Proof Exposion Proof Exposion Proof Pneumatic N4 N7 B1 B2 P1 1 NPT (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** * Minimum 146.1 overhead cearance required to remove 5.75 housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. 24/60 Registered Quaity System to ISO 9001:2008

400 Series Caibration Dimensions Standard Differentia (D) Mode D @ Minimum Specific Gravity 401 402 3 (76 mm) 403 404 405 23/4 (70 mm) 406 Note: With antivibration, extrahigh temperature and pneumatic switch, minimum differentia wi increase. Maximum Differentia (D) Differentia Dimension D is caibrated to the minimum shown above as standard. Wider differentias are avaiabe by pacing an SC in the accessory section of the mode number. The charts beow give the maximum differentias avaiabe. NPT Units Mode Customer Mounting 1/2 Couping Fu Couping 401 123/8 (356 mm) 101/4 (292 mm) 402 87/8 (292 mm) 87/8 (292 mm) 404 123/8 (356 mm) 101/4 (292 mm) Fanged Units Customer Nozze Length (N) Mode 2 (51 mm) 4 (102 mm) 6 (152 mm) 8 (203 mm) 10 (254 mm) 403 13 (330 mm) 9 (229 mm) 7 (178 mm) 5 (127 mm) 41/2 (114 mm) 405* 6 (152 mm) 5 (127 mm) 406* *Based on 4inch fange size. Registered Quaity System to ISO 9001:2008 25/60

741743, 801 and 802 Series Step 1: Mode Series 741 AA1C BA1N4CRTT The 741743, 801 and 802 Series mechanica eve switches are dispaceroperated with fanged, serviceabe externa chambers. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum Working Pressure Mode Series Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 741 285 275 (19.7) (18.9) 260 240 (17.4) (16.5) 230 215 (15.8) (14.8) 215 205 (14.8) (14.1) 200 195 (13.7) (13.4) 185 182 (12.7) (12.5) 742 740 720 (51.0) (49.6) 675 620 (46.5) (42.7) 655 560 (45.1) (38.6) 645 537 (44.4) (37.0) 635 515 (43.7) (35.5) 618 497 (42.6) (34.2) 743 1480 1440 (102.0) (99.3) 1350 1240 (93.1) (85.5) 1315 1120 (90.6) (77.2) 1293 1075 (89.1) (74.1) 1270 1030 (87.5) (71.0) 1235 992 (85.1) (68.4) 801 1435 1440 (98.9) (94.3) 1350 1240 (93.1) (85.5) 1315 1120 (90.6) (77.2) 1293 1075 (89.1) (74.1) 1270 1030 (87.5) (71.0) 1235 992 (85.1) (68.4) 802 3376 3504 (232.8) (241.6) 3375 3095 (232.7) (213.4) 3280 2795 (226.2) (192.7) 3225 2682 (222.4) (184.9) 3170 2570 (218.6) (177.2) 3083 2480 (212.6) (171.0) *Consut the factory for pressure ratings of units with Mone trim. Standard dispacer units are not avaiabe above 450 F (232 C). Minimum Specific Gravity Mode Series 741 Standard AntiVibration or Pneumatic 742 743 0.43 0.57 801 802 0.37 0.5 Step 2: Chamber Materia 741 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternate materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings 26/60 Registered Quaity System to ISO 9001:2008

741743, 801 and 802 Series Step 3: Process Connection 741 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye NPT Thread Socket Wed 150# RF 300# RF Fange 600# RF 1500# RTJ VH A1A A1B A1C A1D A1E A1T VH (Vertica/Horizonta) VV (Vertica/Vertica) 1 VV B1C B1D B1E B1T VVD C1A C1B C1C C1D C1E C1T VVT D1C D1D D1E D1T VH A5A A5B A5C A5D A5E A5T 11/2 VV B5C B5D B5E B5T VVD C5A C5B C5C C5D C5E C5T VVT D5C D5D D5E D5T VVD (Vertica/Vertica/ Drain) VVT (Vertica/Vertica/ Tee Drain) VH A2A* A2B* A2C A2D A2E A2T 2 VV B2C B2D B2E B2T VVD C2A* C2B* C2C C2D C2E C2T VVT D2C D2D D2E D2T *Not avaiabe on Modes 741, 742, and 743. Step 4: Trim Materia 741 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Designator Dispacer Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Registered Quaity System to ISO 9001:2008 27/60

741743, 801 and 802 Series Caibration Dimensions The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. Mode 741, 742, 743, 801 Specific Gravity B C.43 13/4 45/8 1.0 49/16 61/16 Specific Gravity Mode 802 B C.37 211/16 51/8 1.0 57/16 67/16 Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required. Drawing 0390019 Drawing 0390021 Drawing 0390010 Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT Note: A process fange nippes are 1 standard. * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section. (Page 48.) *** M20 adapters are brass. Contact the factory for aternate materias. ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** 28/60 Registered Quaity System to ISO 9001:2008

741743, 801 and 802 Series Chamber Dimensions 1 Connections Mode D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 741 193/16 487 742 13 330 31/4 83 6 152 16 406 16 406 3 76 193/4 502 743 201/2 521 801 111/2 292 33/4 95 31/4 83 201/4 514 8 203 16 406 16 406 802 123/4 324 315/16 100 63/4 171 219/16 548 11/2 Connections Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 741 193/16 487 742 13 330 31/4 82 6 152 16 406 16 406 3 76 193/4 502 743 201/2 521 801 119/16 294 33/4 95 31/4 83 201/4 514 8 203 16 406 16 406 802 127/8 327 41/16 103 63/4 171 219/16 548 2 Connections Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 741 5 193/16 487 5 742 6 152 16 406 16 406 4 5 103 5 193/4 5 502 5 743 201/2 5 521 5 801 1111/16 297 37/8 98 41/4 108 211/4 540 8 203 16 406 16 406 802 131/4 337 47/16 113 73/4 197 229/16 573 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. Registered Quaity System to ISO 9001:2008 29/60

740, 803 and 804 Series Step 1: Mode Series 740 AA1CBA1N4CRTT The 740, 803, and 804 Series mechanica eve switches are dispacer operated with seaed, tamperproof externa chambers. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum Working Pressure Mode Series Chamber Materia Pressure at Listed Temperature in psig (bar)* 100 F (38 C) 200 F (93 C) 300 F (149 C) 350 F (177 C) 400 F (204 C) 450 F (232 C) 740 1480 (102.0) 1465 (101.0) 1450 1400 (100.0) (96.5) 1436 1344 (99.0) (92.6) 1420 1287 (97.9) (88.7) 1380 1241 (95.1) (85.5) 803 1435 1480 (98.9) (102.0) 1435 1321 (98.9) (91.1) 1435 1187 (98.9) (81.8) 1435 1139 (98.9) (78.5) 1420 1091 (97.9) (75.2) 1380 1052 (95.1) (72.5) 804 3376 3504 (232.8) (241.6) 3376 3106 (232.8) (214.2) 3376 2791 (232.8) (192.4) 3376 2678 (232.8) (184.6) 3375 2566 (232.7) (176.9) 3355 2476 (231.3) (170.7) * Consut the factory for pressure ratings of units with Mone trim. Standard dispacer units are not avaiabe over 450 o F (232 o C). Minimum Specific Gravity Mode Series 740 803 Standard AntiVibration or Pneumatic 0.43 0.57 804 0.37 0.50 Step 2: Chamber Materia 740 AA1CBA1N4CRTT Seect chamber materia from the foowing chart. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Grade B Carbon Stee with A105 and A234WPB fittings A312TP316/316L Stainess Stee with A182316/316L and A403316/316L fittings 30/60 Registered Quaity System to ISO 9001:2008

740, 803 and 804 Series Step 3: Process Connection 740 AA1CBA1N4CRTT Seect a process connection size, stye and designator from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size 1 11/2 Stye NPT Thread Socket Wed VH (Vertica/Horizonta) VVD (Vertica/Vertica/ Drain) VV (Vertica/Vertica) VVT (Vertica/Vertica/ Tee Drain) VH A2A* A2B* A2C A2D A2E A2T VV B2C B2D B2E B2T 2 VVD C2A* C2B* C2C C2D C2E C2T VVT D2C D2D D2E D2T *Not avaiabe on Mode 740. Step 4: Trim Materia 740 AA1CBA1N4CRTT Seect the interna trim materia from the chart beow. Consut the factory for pressure ratings on Mone trim. Caibration Dimensions 150# RF 300# RF Fange The charts beow provide typica standard Set Points. As the specific gravity used on a eve switch changes, the Set Points wi aso change. These vaues are based on the specific gravity isted and units with B trim and an A1 switch. For other materias or switches, pease consut factory. If a specific Set Point is needed, pease use the SC option found in the accessories section of this cataog. 600# RF 1500# RTJ VH A1A A1B A1C A1D A1E A1T VV B1C B1D B1E B1T VVD C1A C1B C1C C1D C1E C1T VVT D1C D1D D1E D1T VH A5A A5B A5C A5D A5E A5T VV B5C B5D B5E B5T VVD C5A C5B C5C C5D C5E C5T VVT D5C D5D D5E D5T Designator Dispacer Materia Attraction Seeve Avaiabe with Chamber Materia: B 316/316L Stainess Stee 400 Stainess Stee A106 Carbon Stee (A) ony C 316/316L Stainess Stee 316/316L Stainess Stee M Mone 400 Mone 400 A106 Carbon Stee (A) or 316/316L Stainess Stee (C) A106 Carbon Stee (A) or 316/316L Stainess Stee (C) Specific Gravity Mode 740, 803 B C.43 13/4 45/8 1.0 49/16 61/16 Specific Gravity Mode 804 B C.37 211/16 51/8 1.0 57/16 67/16 Registered Quaity System to ISO 9001:2008 31/60

740, 803 and 804 Series Chamber Dimensions Dimensions isted are for reference ony and are expressed as miimeters over inches. (Linear = mm/in.) They are subject to change without notice. Contact SOR for certified drawings of particuar modes or if specia dimensions are required. Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** Drawing 0390660 Drawing 0390661 Drawing 0390662 * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Note: A process fange nippes are 1 standard. 1 Connection Mode 11/2 Connection 2 Connection D 1, 2 E 1, 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 740 13 330 31/4 83 6 152 16 406 16 406 31/16 78 213/8 543 803 111/2 292 33/4 95 31/16 78 22 559 8 203 16 406 16 406 804 123/4 324 315/16 100 63/4 171 221/8 562 Mode D 2 E 2 F 4 G H 4 I 2 L 2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 740 13 330 31/2 89 6 152 16 406 16 406 31/16 78 213/8 543 803 119/16 294 4 102 31/16 78 22 559 8 203 16 406 16 406 804 127/8 327 41/16 103 63/4 171 221/8 562 Mode D 2 E 2 F 4 G H 4 I 2, 3 L 2, 3 inch mm inch mm inch mm inch mm inch mm inch mm inch mm 740 6 152 16 406 16 406 31/16 5 78 5 213/8 5 543 5 803 1111/16 297 41/2 114 7 178 22 559 8 203 16 406 16 406 804 131/4 337 47/16 113 63/4 197 221/8 562 Notes 1. Dimensions D and E appy to socketwed connections ony. Consut factory for NPT dimensions. 2. Consut factory for dimensions for materias other than carbon stee. 3. Appies to socket wed or NPT process connections ony. 4. Consut the factory if wed neck process fanges are required. Dimensions may vary from those shown above. 5. Appies to fanged process connections ony. 32/60 Registered Quaity System to ISO 9001:2008

700 Series Step 1: Mode Series 702 AF7ABA1N4CRTT The 700 Series mechanica eve switches are singestage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Minimum specific gravity is based on singe switch. Antivibration and pneumatic switches have higher minimum specific gravities. Maximum Working Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Dispacer units are not avaiabe over 450 F (232 C). Connection Materia Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) 701 0.51 Porceain A 1000 (69) 750 (52) NPT 702 0.45 SS A 1000 (69) 750 (52) Narrow 703 0.51 Fange Porceain Differentia 704 0.45 Fange SS A105 285 (20) 185 (13) 275 (19) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) 705 Porceain A 1000 (69) 750 (52) NPT 706 SS A 1000 (69) 750 (52) Wide 707 0.50 Fange Porceain Differentia 708 Fange SS A105 285 (20) 185 (13) 275 (20) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) *An operating specific gravity is required for modes 705 through 708 at time of order. Step 2: Process Connection Materia 702 A F7ABA1N4CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A105 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges Registered Quaity System to ISO 9001:2008 33/60

700 Series Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Step 3: Process Connection 702 A F7ABA1N4CRTT Mode 701 702 703 704 705 706 707 708 21/2 NPT F7A F7A F7A F7A 3 4 6 NPT F3A F3A F3A F3A 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Step 4: Trim Materia 702 A F7ABA1N4CRTT Mode 701 702 703 704 705 706 707 708 316/316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R 34/60 Registered Quaity System to ISO 9001:2008

700 Series Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Mode 701/703 21/2 NPT/Fanged Narrow Differentia Mode 702/704 21/2 NPT/Fanged Narrow Differentia Narrow Differentia Modes 701704: Actuation differentia is approximatey 17/16 @ Specific Gravity of 1.0 @ 100 F. Wide Differentia Modes 705708: Actuation differentia is adjustabe from approximatey 9 1/2 (minimum @ Specific Gravity of 1.0 @100 F) to avaiabe cabe ength. Drawing 0390670 Drawing 0390671 Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT Mode 705/707 21/2 NPT/Fanged Wide Differentia Mode 706/708 21/2 NPT/Fanged Wide Differentia ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Switch Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Drawing 0390672 Drawing 0390673 Registered Quaity System to ISO 9001:2008 35/60

730 Series Step 1: Mode Series 731 AF7ABA2N4CRTT The 730 Series mechanica iquid eve switches are duastage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Seect a mode series from the charts beow based on maximum operating pressure and minimum specific gravity. Maximum Working Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Narrow 732 0.72 Fange Porceain Differentia Connection Materia Dispacer units are not avaiabe over 450 o F (232 o C). *An operating specific gravity is required for a 730 series at time of order. Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) 730 0.72 Porceain A 1000 (69) 750 (52) NPT 731 0.64 SS A 1000 (69) 750 (52) 733 0.64 Fange SS Wide 736 0.64 Fange Porceain Differentia A105 285 (20) 185 (13) 275 (19) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) 734 Porceain A 1000 (69) 750 (52) NPT 735 SS A 1000 (69) 750 (52) 737 Fange SS A105 285 (20) 185 (13) 275 (20) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) Step 2: Process Connection Materia 731 A F7ABA2N4CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A106 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges 36/60 Registered Quaity System to ISO 9001:2008

730 Series Step 3: Process Connection 731 A F7ABA2N4CRTT Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Mode 730 731 732 733 734 735 736 737 21/2 NPT F7A F7A F7A F7A NPT F3A F3A F3A F3A 3 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 4 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 6 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Step 4: Trim Materia 731 A F7ABA2N4CRTT Mode 730 731 732 733 734 735 736 737 316/316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R Registered Quaity System to ISO 9001:2008 37/60

730 Series Unit Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Mode 730/732 21/2 NPT/Fanged Narrow Differentia Mode 731/733 21/2 NPT/Fanged Narrow Differentia Housing** Genera Purpose Exposion Proof Exposion Proof Exposion Proof N4 N7 B1 B2 W 1 NPT Pneumatic P1 (3) 1/4 NPT Drawing 0390677 Drawing 0390678 ATEX Fame Proof SAA Fame Proof T6 S3 w/cl S3 S8 M20 x 1.5*** Mode 734/736 21/2 NPT/Fanged Wide Differentia Mode 735/737 21/2 NPT/Fanged Wide Differentia * Minimum 53/4 (146 mm) overhead cearance required to remove housing cover. ** See Switch Housing section (page 48). *** M20 adapters are brass. Contact the factory for aternate materias. Drawing 0390679 Drawing 0390680 38/60 Registered Quaity System to ISO 9001:2008

730 Series Specific Gravity Ranges Optiona Switching Arrangements Duastage, wide differentia switches may be ordered with switching arrangements different from those shown on page 38. To order, seect the desired arrangement beow and add SC to the accessory section of the mode number. At the time of order, specify the required arrangement number. Porceain dispacers are shown for pictoria purposes ony. Arrangement 1 Arrangement 2 Arrangement 4 Arrangement 5 Arrangement 6 Switch Position Registered Quaity System to ISO 9001:2008 39/60

750 Series Step 1: Mode Series 751 AF7ABA3N1CRTT The 750 Series mechanica eve switches are threestage, dispaceroperated switches suitabe for topinsertion tank mounting. Seect the sensing unit from the foowing charts. Then refer to pages 44 50 for switching eements, housings and accessories. Maximum Working Pressure Mode Series Minimum Specific Gravity Function Connection Stye Dispacer Materia Narrow 752 0.96 Fange Porceain Differentia Dispacer units are not avaiabe over 450 o F (232 o C). Connection Materia Pressure Rating psig (bar) 100 F (38 C) 450 F (232 C) 750 0.96 Porceain A 1000 (69) 750 (52) NPT 751 0.85 SS A 1000 (69) 750 (52) 753 0.85 Fange SS A105 285 (20) 185 (13) 275 (19) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) 754 0.96 Porceain A 1000 (69) 750 (52) NPT 755 0.95 SS A 1000 (69) 750 (52) Wide 756 0.96 Fange Porceain Differentia 757 0.95 Fange SS *An operating specific gravity is required for a 750 series at time of order. A105 285 (20) 185 (13) 275 (20) 182 (13) A105 285 (20) 185 (13) 275 (19) 182 (13) Step 2: Process Connection Materia 751 A F7ABA3N1CRTT Seect a process connection materia from the chart beow. Maximum working pressure in the chart above is based on the materia seected here. Consut the factory for aternative materias. Designator A C Materia A105 Carbon Stee fittings or fanges A182TP316/316L Stainess Stee fittings or fanges 40/60 Registered Quaity System to ISO 9001:2008

750 Series Step 3: Process Connection 751A F7ABA3N1CRTT Seect a process connection stye, size and rating from the chart beow. Consut the factory for variations. Fanged process connections may reduce the maximum working pressure of the unit. Size Stye Mode 750 751 752 753 754 755 756 757 21/2 NPT F7A F7A F7A F7A NPT F3A F3A F3A F3A 3 150# RF Fange F3C F3C F3C F3C 300# RF Fange F3D F3D F3D F3D 4 150# RF Fange F4C F4C F4C F4C 300# RF Fange F4D F4D F4D F4D 6 150# RF Fange F6C F6C F6C F6C 300# RF Fange F6D F6D F6D F6D Seect the interna trim materia from the chart beow. Step 4: Trim Materia 751 A F7ABA3N1CRTT Dispacer Materia Attraction Seeve Construction Materia Standard dispacer spring materia is Incone 600. Mode 750 751 752 753 754 755 756 757 316/316L SS 400SS A ony B B B B 316/316L SS 316/316L SS A or C C C C C Porceain 400SS A ony P P P P Porceain 316/316L SS A or C R R R R Registered Quaity System to ISO 9001:2008 41/60

750 Series Dimensions Dimensions in this cataog are for reference ony. They may be changed without notice. Contact the factory for certified drawings for a particuar mode number. Dimensions are expressed as miimeters over inches. (Linear = mm/in.) Mode 750/752 21/2 NPT/Fanged Mode 751/753 21/2 NPT/Fanged Mode 754/756 21/2 NPT/Fanged Mode 755/757 21/2 NPT/Fanged Drawing 0390681 Drawing 0390682 Drawing 0390683 Drawing 0390684 * Minimum 83/4 (222 mm) overhead cearance required to remove housing cover. Housing** Exposion Proof Genera Purpose Exposion Proof B5 N1 N8 W 1 NPT ** See Switch Housing section (Page 48). 42/60 Registered Quaity System to ISO 9001:2008

750 Series Specific Gravity Ranges Optiona Switching Arrangements Threestage, wide differentia switches may be ordered with switching arrangements different from those shown on page 39. To order, seect the desired arrangement beow and add SC to the accessory section of the mode number. At the time of order, specify the required arrangement number. Porceain dispacers are shown for pictoria purposes ony. Arrangement B Arrangement C Arrangement D Arrangement E Arrangement F Arrangement G Arrangement H Switch Position Registered Quaity System to ISO 9001:2008 43/60

Mechanica Leve Switches Switching Mechanisms SOR switching mechanisms are designed for use in harsh industria atmospheres. SOR offers a variety of eectrica and pneumatic switching mechanism types to fit a wide range of appications. The basic types of switch mechanisms avaiabe are isted beow. See page 47 for specifications. A SOR switching mechanisms are constructed from stainess stee and other durabe manufactured materias. Each mechanism is individuay caibrated and inspected to insure accuracy and repeatabiity. See beow for the benefits and appication of each switch type. A mechanisms are interchangeabe with most competitor units. Standard DryContact Switches Types A, B, C, E Standard drycontact switches have open mechanisms and exposed switching eements. These switching mechanisms are easy to maintain. Visua confirmation of operation is obvious. Drycontact switch mechanisms are recommended for most eve switch appications and are avaiabe in SPDT and DPDT switch arrangements. DryContact Switch Mechanisms feature: Highoad carrying capacity Highquaity phenoic insuator Vibration resistance Versatiity of appication MiniHermeticay Seaed Switches Types L, S, T, V Minihermeticay seaed switches have a hermeticay seaed switch eement on an exposed mechanism. Good for hightemperature service and norma appications that require hermeticay seaed contacts. MiniHermeticay Seaed Switch Mechanisms feature: Rugged stainess stee construction Cass I Group A rating for use in hazardous areas Vibration resistance High operating temperature imits AntiVibration Switches Types D and R AntiVibration Switches empoy two magnets to provide vibration protection. Dua magnets prevent fase trips by providing a positive mechanica ock to the encosing tube when the switch is in any position. (Type T switches are minihermeticay seaed units with dua magnets.) 44/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Switching Mechanisms Pneumatic Switch Type J Pneumatic switches are avaiabe for appications that prohibit eectrica switching or where eectricity is not avaiabe. Pneumatic switches feature: Threeway auminum vave Antivibration design 1/4" NPT ports in for additiona corrosion resistance ExtraHigh Temperature Switch Type Y The Y Series eve switch mechanism is designed to operate normay under extremey hightemperature conditions. Constructed of stainess stee, ceramic, and oxidationresistant aoys, the Y Series is designed to counteract the warping and seizure normay associated with this type of mechanism in high temperatures. The Y Series switch is especiay we suited for power pant conditions. Y Series Switch Mechanisms feature: Mica/gass insuation on wires and switches Stainess stee and ceramic switch eement and termina bock Switch mechanism rated at 800 F (427 C) continuous process temperature Can be combined with externa temperature protection to function in temperatures up to 1200 F (649 C) Dua magnets for vibration protection Registered Quaity System to ISO 9001:2008 45/60

CSA UL ATEX SAA Mechanica Leve Switches Switching Mechanisms 741A A1CBA1N4CRTT Seect the switch mechanism from the chart beow. Switch Type SPDT Singe Poe Doube Throw DPDT Doube Poe Doube Throw 3Way Vave Switching Stages Singe Dua Tripe Singe Dua Tripe Singe Avaiabe Agency Listings Switching Description Standard Dry Contact HighTemperature Dry Contact God Contact AntiVibration Dry Contact 1 HighAmperage DC Service A1 B1 C1 D1 1 E1 A2 B2 C2 E2 Switch Designator A3 B3 C3 E3 Standard MiniHermeticay Seaed L1 L2 L3 L4 L5 L8 AntiVibration God Contact 1 R1 1 R4 1 A4 B4 C4 D4 1 E4 A5 B5 C5 E5 A8 B8 C8 E8 God Contact MiniHermet AntiVibration MiniHermet 1 HighTemperature MiniHermet S1 T1 1 V1 S2 V2 S3 V3 S4 T4 1 V4 S5 V5 S8 V8 ExtraHigh Temperature (Ceramic) Pneumatic NonBeed with Fittings Y1 1 Y4 1 J0 1,2 Avaiabe with modes: Series 100200300740800 Series 108/208400 Series 700 Series 730 Series 750 (encosures N1, N8 or B5 ony) Notes 1. These switches use two magnets and must be considered dua mechanisms when figuring minimum specific gravity. 2. Pneumatic switching mechanisms must be specified with P1 housing. 46/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Switch Ratings Resistive Amperage Inductive Amperage Switch Designator 110130VAC 210250VAC 2030VDC 110130VDC 210250VDC 110130VAC 210250VAC 2030VDC 110130VDC 210250VDC Minimum Temperature 1 Maximum Temperature 2 A Standard Dry Contact 15 15 5.5.25 15 15 5.4.13 15 F (26 C) 250 F (121 C) B HiTemperature Dry Contact 5 5 1.5.5 5 5 1.25 15 F (26 C) 400 F (204 C) C God Contact 1 1 1.5 15 F (26 C) 250 F (121 C) D AntiVibration 15 15 5.5.25 15 15 5.4.13 15 F (26 C) 250 F (121 C) E HighAmp DC 10 10 3 10 10 3 15 F (26 C) 250 F (121 C) L 5 Mini Hermeticay Seaed DPDT 5 5 5.5 5 5 2.5.25 SPDT 11 11 5.5.25 11 11 2.5.25.13 15 F (26 C) 250 F (121 C) R S AntiVibration God Contact God Contact Mini Hermet 1 1 1.5 15 F (26 C) 250 F (121 C) 1 1 1.5 15 F (26 C) 250 F (121 C) T 5 AntiVibration MiniHermet DPDT 5 5 5.5 5 5 2.5.25 15 F (26 C) 250 F (121 C) SPDT 11 11 5.25.25 11 11 2.5.5.13 15 F (26 C) 250 F (121 C) V Y J 4 HighTemperature MiniHermet ExtraHigh Temperature (Ceramic) Pneumatic Fittings 5 5 1.5.5 5 5 1.25 15 F (26 C) 400 F (204 C) 1 1 1.4 1 1.4 40 F Note 3 (40 C) 800 F (427 C) Nonbeed 3way auminum vave body. BunaN ORings 5 F (15 C) 200 F (93 C) 150 psig maximum suppy, 24CFM @ 100 psig Notes 1. Minimum ambient temperature at which the switch mechanism wi operate normay. This may vary according to actua cimatic conditions. Actua minimum process temperature may be much ower. Consut the factory for detais. 2. Maximum process temperature at which the switch mechanism wi operate normay. This can be increased according to the type of process. Refer to pages 51 52 for more detais. 3. 40 F Temperature rating with no icing. 4. Pneumatic switches must be used with cean, dry air or gas. 5. These switch designators have higher current rating for SPDT than DPDT. Registered Quaity System to ISO 9001:2008 47/60

Mechanica Leve Switches SOR housings are designed to protect the switching mechanisms from harsh environmenta conditions, as we as protecting the surrounding atmosphere from potentia ignition sources. The basic types of housings are isted beow. Genera Purpose, NEMA 4 Housings are heavy duty cast auminum. A housings are rated NEMA 4 (IP65) as a minimum. ExposionProof Housings are avaiabe in auminum or cast iron. ExposionProof ratings incude Cass I, Group B, C, D; Division 1 & 2, and EEx d IIC T6 (ATEX) and Ex d IIC T6 (SAA). Pneumatic Switch Housings are required for use with a pneumatic switching mechanism. These encosures are Genera Purpose, NEMA 4 (IP65) ony. NEMA 4X Housings are standard in auminum. Cast iron encosures can be rated NEMA 4X by adding epoxy coating. Switch Housings Seect the housings from the chart beow. Housings 741A A1CBA1N4CRTT Agencies Avaiabe with Modes Designator Description Encosure Rating 2 CSA UL ATEX SAA 100, 200, 300 108, 208, 400 740, 800 700 s 730 s 750 s B1 Auminum Groups B, C, & D B2 2 Cast Iron Groups B, C, & D B5 Auminum Extended Groups B, C, & D N1 Auminum Extended NEMA 4, 4X N4 Auminum NEMA 4, 4X N6 2 Cast Iron Doube Hub Groups C & D N7 Auminum Groups C & D N8 Auminum Extended Groups C & D P1 1 Auminum Pneumatic NEMA 4, 4X S3 Auminum Ex d IIC T6 (SAA) EEx d IIC T6 (ATEX) n S8 2 Cast Iron Ex d IIC T6 (SAA) n T6 2 Cast Iron EEx d IIC T6 (ATEX) n Avaiabe Standard (Agency isting accessory designator is not needed.) 1. P1 housing must be used with pneumatic switch mechanisms. 2. A cast iron housings can be rated NEMA 4X by adding PY to the accessory section of the mode number. 48/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches AF 1 FE CL CN7 CP7 CR7 CS 2 CV CY CZ 3 EC 8 ET 5 FE GG ID 9 KK MC 4 MR MT NC PP PT PY Description Air Fiter & Gauge Finned Extention ATEX Approved for S3 Hsg Conduit Reducer M20 x 1.5 Conduit Reducer 1/2 NPT Conduit Reducer 3/4 NPT CSA Certification Canadian Registration Number (CRN) Certificate of Conformance (power pant piping, ANSI 31.1) Certificate of Conformance (petrochemica piping, ANSI 31.3) Extra Chamber Connection Temperature Extension Finned Extention Seaed Conduit Interface Detection Housing Breather Drain Manua Check Mi Test Report Mag Partice Examination NACE Construction Fiber Tag Dye Penetration Examination Powder coat epoxy coating. No coating on stainess stee parts or pated screws. (500 hrs. sat spray) SS Tag wired to housing 100 200 C/F C/F 108/ 208 C/F 300 400 Mode Series 741743 801 802 740 803 804 700 730 750 Registered Quaity System to ISO 9001:2008 49/60 Accessories 741A A1CBA1N4CRTT SOR accessories are provided for customizing the eve switches in this cataog according to the requirements of the appication. Pace accessory designator(s) from the tabe beow at the end of the mode number. Check the compatibiity chart beow for correct use of each accessory. Accessory Compatibiity Chart RR RT Radiograph Examination SC 10 Specia Caibration C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F SD 11 Specia Dimensions C/F C/F C/F C/F C/F SL 12 Specia Cabe Length TC 4 TruCheck TF Tandem Foats C/F C/F TT Oversized Namepate for customer tagging UT Utrasonic Examination VV Fungicida Varnish WC Water Coumn Unit C/F WV 2 UL Listed YY Epoxy Coating (encosure ony) Notes C/F = Consut the Factory 1. Pneumatic switching mechanisms ony (P1) 2. Consut switch and housing sections for agency avaiabiity. 3. Process media must be known prior to manufacture. Different processes (service categories) require different quaity inspection procedures. Consut the factory for detais. 4. Appropriate for Mode Series 701 through 704 and 730 through 733. See page 55 for detais. Not avaiabe with NACE. 5. See hightemperature seection for appication. C/F C/F 6. Not avaiabe with agencyisted housings. 7. Not avaiabe with T6 and S3 (ATEX) housings. 8. Need connection size, type, and ocation on chamber. 9. The upper and ower specific gravity required to determine functionaity. 10. Operating specific gravity, Set Point (referenced from upper process connection) and if Set Point is rising or faing are required. 11. Specific detais of chamber dimensiona changes. 12. Length of cabe required (10 ft. is standard).

Mechanica Leve Switches Test Certificates Foat Operated Switches Series 100 Series 200 Series 220 Series 300 Series 400 Series 108/208 Certificates C1 C2 C3 C4 C5 C6 C7 B2 B3 B5 B6 B7 A2 A3 A4 A7 A8 A9 Caibration Hydrostatic Pressure Test Inspection Report Compiance / Conformance Dieectric Test Insuation Resistance QA Test Report Dispacer Operated Switches Series 700, 730, 750 *Series 740 *Series 800 Certificates C1 C3 C4 C5 C6 C7 B5 B6 B7 Caibration Inspection Report Compiance / Conformance Dieectric Test Insuation Resistance QA Test Report *These products aso have Certificate C2 Hydrostatic Pressure Test. 50/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches High Temperature Seection SOR eve switches can accommodate hightemperature appications up to 1200 o F (649 o C). These temperatures may be safey reached by a proper combination of chamber materia, switch mechanism and temperature extension. Refer to page 52 to seect the proper components for your process temperature. ET Accessory The straight temperature extension provides physica distance between the process and the switching mechanism. It is constructed of a straight piece of pipe weded between the chamber and encosing tube connection. How It Works The straight temperature extension is designed to remove the switch from direct radiant heat in dry heat processes. Consut the chart on page 52 for appication. To Specify Add Accessory Designator ET to the end of the SOR eve switch mode number per the seection chart on the next page. The ET accessory automaticay matches the materia and rating of the specified eve switch chamber. This option can be suppied on SOR eve switches Series 100, 200, 300 and 400. 201 A A1CBA1N4ET TT FE Accessories 201 A A1CBA1N4FE TT The finned temperature extension is designed to protect the eectrica portion of a eve switch from heat damage due to condensing processes. When used in combination with hightemperature switch mechanisms, this option aows operation in process temperatures up to 1200 o F (649 o C). How It Works The finned temperature extension condenses process steam and reduces its heat before it can reach the switching mechanism. The design reduces steam to its saturation temperature in the encosing tube, protecting the switching mechanism from deterioration due to high temperatures. The process pressure dictates the saturation temperature, see page 58. To Specify Add Accessory Designator FE to the end of the SOR eve switch mode number per the seection chart on the next page. The finned temp. extension automaticay matches the materia and rating of the specified eve switch chamber. These options can be suppied on SOR eve switches series 100, 200,108/208, 300 and 400. Note: For proper cooing, temp. extensions must not be insuated or paced inside an encosed structure. High ambient temperatures (over 100 o F/38 o C), intense direct sunight, or heat oading from adjacent piping or vesses wi affect cooing performance. Consut the factory if any of these conditions exist. Drawing 0390676 Registered Quaity System to ISO 9001:2008 51/60

Mechanica Leve Switches High Temperature Seection There are two sections to the chart, Steam Heat and Dry Heat. Fundamenta differences in condensing (steam) and noncondensing (dry) heat require different methods of protection. Steam Heat processes carry it s heat with the vapor. These processes effectivey heat every portion of their encosure. To reduce the heat effects of condensing processes, we must either condense or physicay bock the vapor. SOR uses a condensing system to avoid the seaing probems associated with bocking the steam. Dry Heat processes transfer heat through direct conduction. Heat is ony passed to the areas where they touch the encosure. Therefore, radiant heat is the ony concern with these processes. This may be resoved by adding distance between the process and the protected portion of the contro. To use the seection chart, first seect the coumn that represents the desired maximum temperature. Seect a chamber materia that is aowabe in the chosen coumn. Move down to the proper process type section, Steam Heat or Dry Heat. Within that section, seect a switch mechanism from those isted in the chosen coumn. The symbo wi indicate if a temperature reduction device is required. High Temperature Seection Chart Features Chamber Materia (Seect one) Carbon Stee 304/304LSS 316/316LSS Designator A C 0400 o F (204 o C) 450 o F (232 o C) 500 o F (260 o C) 550 o F (288 o C) 600 o F(316 o C) 650 o F (343 o C) 700 o F (371 o C) 750 o F (399 o C) 800 o F (427 o C) 850 o F (454 o C) 900 o F (482 o C) 950 o F (510 o C) 1000 o F (538 o C) 1050 o F (566 o C) 1100 o F (593 o C) 1150 o F (621 o C) 1200 o F (649 o C) A333 GR.6 A335P11 Chrome Moy A335P91 Hasteoy C Aoy20 Mone400 Steam Heat Appications Switch Mechanism (Seect one) HiTemp Dry Contact or MiniHermet B/V n v v HiTemperature Ceramic/SS Y n n n n n n n n n v v v v v v v v Dry Heat Appications Switch Mechanism (Seect one) HiTemp MiniHermet B/V n or Dry Contact HiTemperature Ceramic/SS Y n n n n n n n n n For proper cooing, temperature extensions and finned extensions must not be insuated or paced inside an encosed structure. High ambient temperatures (over 100ºF/38ºC), intense direct sunight or heat oading from adjacent piping or vesses wi affect cooing performance. Consut the factory if any of these conditions exist. n = Switch Ony v = Finned Extension = Temperature Extension 52/60 Registered Quaity System to ISO 9001:2008

Higher temperatures avaiabe with other materias. Consut with the factory. Mechanica Leve Switches High Temperature Seection Foat Switch Pressure Ratings (in psi) above 450 F (232 C) Mode Materia 500 F (260 C) 550 F (288 C) 600 F (316 C) 650 F (343 C) 700 F (371 C) 750 F (399 C) 101 CS & SS 170 155 140 125 110 95 102 CS & SS 447 435 423 411 400 389 103 CS SS 600 480 575 465 550 450 535 445 535 430 104 CS & SS 894 870 846 823 800 778 108 CS SS 600 480 575 465 550 450 535 445 535 430 505 425 505 425 109 CS & SS 170 155 140 125 110 95 121 CS & SS 170 155 140 125 110 95 122 CS & SS 313 304 296 288 280 272 201 CS & SS 201 196 190 185 180 175 202 CS & SS 268 261 254 247 240 233 203 CS & SS 447 435 423 411 400 389 204 CS & SS 1118 1087 1057 1029 1000 972 205 CS & SS 671 652 634 617 600 584 206 CS & SS 894 870 846 823 800 778 207 CS & SS 894 870 846 823 800 778 208 CS SS 1857 1495 1857 1453 1857 1411 1857 1387 1783 1351 1610 1339 209 CS & SS 403 391 381 370 360 350 221 CS & SS 313 304 296 288 280 272 Registered Quaity System to ISO 9001:2008 53/60

Mechanica Leve Switches Examination and Testing Requirements 741A A1CBA1CYCRTT Certificate of Conformance Specify either a CY or CZ option in the accessory section of the mode number for a certificate of conformance. Designator CY CZ Certificate of Conformance to ASME/ANSI B31.1 Power Piping ASME/ANSI B31.3 Petrochemica Piping If certification to B31.3 is required, SOR must know the fuid category per the chart beow. Refer to the ASME/ANSI B31.3 Fuid Category Section to determine the appicabe category. ANSI/ASME B31.3 Fuid Category Norma A fuid service not subject to the foowing four categories. Category D A fuid service in which a of the foowing appy: 1. The fuid handed is nonfammabe, nontoxic, and not damaging to human skin. 2. The design gage pressure does not exceed 150 psi. 3. The design temperature is between 20 F and 366 F. Category M A fuid service in which the potentia for personne exposure is judged to be significant and in which a singe exposure to a very sma quantity of a toxic fuid, caused by eakage, can produce serious irreversibe harm to persons on breathing or bodiy contact, even when prompt restorative measures are taken. Severe Cycic A fuid service with highcyce rates that cause extreme stress on components. High Pressure Pressure in excess of that aowed by the ASME B16.5 Cass 2500 rating for the specified temperature and materia group or any piping so designated by the customer. Wed Examination When CY or CZ is specified, SOR performs examination to meet these codes. This incudes visua inspection and utrasonic, Xray, magnetic partice or dye penetrant testing as required by ASME B31.1 or B31.3. If CY or CZ is not seected but examination is required, accessories UT (utrasonic), RT (Xray), MT (magnetic partice) or PT (dye penetrant) can be added to the mode number to incude this testing. Hydrostatic Testing SOR performs a hydrostatic pressure test on a weded chambers at 1.5 times the design pressure for three minutes. CY and CZ options and Hydrotest Certificates incude a hydrostatic pressure test at 1.5 times the design pressure for ten minutes as required by ASME B31.1 and B31.3 codes. A hydrostatic test certificate is aso avaiabe as an accessory. See Test Certificates, Form 1254. 54/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches MC and TC Options 702AAICBA1MCCRTT Manua Check (MC) and TruCheck (TC) options permit manua actuation of vertica dispacer eve switches, addressing EPA and OSHA safety requirements. The standard 30foot stainess stee chain aows manua actuation from the tank base, eiminating potentiay hazardous trips to the top of the tank. Specify either an MC or TC option by pacing the designator in the accessory section of the mode number. Designator TC MC Appication Tanks or vesses pressurized to 100 psi Atmospheric vented tanks or vesses These options are avaiabe on SOR eve switch Series 701 through 704 and 730 through 733. MC and TC option avaiabe on carbon stee units ony. Series 730 through 733 are more sensitive to both high and ow SG vaues. Pease consut factory before ordering the MC or TC options for these modes. How It Works Puing the hande transfers downward motion to the actuator ever by means of the beaded stainess stee chain. The resutant motion ifts the entire eve sensing assemby which moves the attraction seeve and actuates the switching eement to simuate a higheve condition. Switching action for aarm, shutdown or contro is verified. Dimensions Product Specifications Pressure Range TC (TruCheck) *0 to 100 psi MC (Manua Check) 0 psi (vented to atmosphere) *Maximum pressure for entire eve sensing assemby is 100 psi with TruCheck instaed. Temperature Range 40 to 300 F ( 40 to 150 C) Wetted Parts Ba Chrome Pated Brass Sea Tefon Spring Spring Stee Body 1018 Stee Design and specifications are subject to change without notice. For atest revision, see www.. Drawing 0390674 Registered Quaity System to ISO 9001:2008 55/60

Mechanica Leve Switches ASTM Materia Designations SOR uses a ASTM grade materias in the construction of mechanica eve switches. The foowing chart ists the specific ASTM (or UNS) materias that are normay used for each component in our switches. Consut the factory if you do not see the specific materia required for your appication. Materia ANSI B36.10 ANSI B16.9 ANSI B36.10 ANSI B16.5 Seamess Pipe Butt Wed Fitting Screwed/Socket Fitting Fanges Temperature Range Carbon Stee A234WPB A105 A105 20 F to 800 F 304/304LSS 2 A312T304 A403WP304 A182F304 A182F304 425 F to 750 F 316/316LSS A312T316 A403WP316 A182F316 A182F316 325 F to 750 F Low Temperature 2 Carbon Stee 11/4% Chrome 2 1/2% Moy HasteoyC276 2 N10276 Aoy20 2 N08020 A333 Gr. 6 A420WPL6 A350LF2 A350LF2 50 F to 700 F A335P11 A234WPL11 A182F11 A182F11 20 F to 1100 F B622 1 B366/B564 B366/B564 B366/B564 325 F to 800 F B464 1 B366/B962 B366/B462 B366/B462 325 F to 800 F Mone 400 2 N04400 B165 1 B366/B564 B366/B564 B366/B564 325 F to 900 F Dupex SS 2 A790 A815 A182F51 A182F51 60 F to 600 F 21/4% Chrome 2 1% Moy 9% Chrome 1% Moy Vanadium A335P22 A335P22 A182F22 A182F22 20 F to 1100 F A335P91 A234WP91 A182F91 A182F91 20 F to 1200 F Notes 1. UNS numbers are given in parenthesis for specia aoys. 2. These materias are avaiabe by specia order ony. Fange Face Finishes The most common fange face finishes are shown. SOR standard fange finishes are highighted. Raised Face Fanges (RF) A raisedface fange finishes are given as a range. AARH (Average Arithmetic Root Height) vaues are given with their metric equivaent. AARH (µin.) 10002000 5001000 250500 125250 63125 3263 1632 Ra (µm) 2550 12.525 6.312.5 3.26.3 1.63.2 0.81.6 0.40.8 Ring Tight Joint Fanges (RTJ) The side surfaces of RTJ gasket surfaces sha not exceed 63µ (1.6µm) roughness per ANSI B16.5. 56/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Specific Gravity of Water The specific gravity of water changes depending on its temperature and pressure. The chart beow ists properties of saturated steam. Saturated steam is the state where water is in transition between iquid and vapor. The chart provides the process temperature with the associated pressure and specific gravity of the condensate water. If a water appication has a high temperature and ow pressure, condensate wi ony be present at the temperature that corresponds to the maximum pressure. Seect the proper row based on the temperature and pressure, and read the specific gravity. Figures are based on saturated steam. Boiing Temperature F Vacuum Inches Hg Specific Gravity 32 29.74.9999 40 29.67 1.0000 50 29.56.9997 60 29.40.9990 70 29.18.9980 80 28.89.9966 90 28.50.9950 100 27.99.9931 110 27.33.9909 120 26.48.9886 130 25.40.9860 140 24.04.9832 150 22.35.9803 160 20.27.9772 170 17.72.9730 180 14.63.9704 190 10.91.9668 200 6.46.9631 210 1.17.9592 Boiing Temperature F Pressure psig Specific Gravity 212 0.0.96 220 2.49.96 230 6.08.95 240 10.27.95 250 15.13.94 260 20.14.94 270 27.17.93 280 34.52.93 290 42.87.92 300 52.30.92 310 63.00.91 320 75.00.91 330 89.3.91 340 103.3.90 350 119.9.89 360 138.3.88 370 158.5.88 380 180.9.87 390 205.4.86 400 232.3.86 410 261.6.85 420 293.4.84 430 328.4.84 440 366.2.83 Boiing Temperature F Pressure psig Specific Gravity 450 407.0.82 460 451.2.81 470 498.8.80 480 550.1.80 490 605.2.79 500 664.3.78 510 728.3.77 520 795.3.76 530 868.3.76 540 945.3.74 550 1028.3.73 560 1116.3.71 570 1209.3.70 580 1308.3.69 590 1414.3.68 600 1529.3.67 610 1644.3.66 620 1769.3.65 630 1902.3.63 640 2042.3.62 650 2190.3.60 660 2346.3.58 670 2511.3.56 680 2690.49 690 2883.48 700 3075.44 705 3189.32 Registered Quaity System to ISO 9001:2008 57/60

Mechanica Leve Switches Conversions Genera EngishtoMetric unit conversions are isted beow. Pressure To Convert from: To: Use this formua: Bar Pounds per Square Inch (psi) bar x 14.504 = psi Kio Pascas (kpa) Pounds per Square Inch (psi) kpa x 0.145 = psi Mega Pascas (MPa) Pounds per Square Inch (psi) MPa x 145 = psi Kiograms per cm 2 (kg/cm 2 ) Pounds per Square Inch (psi) kg/cm 2 x 14.223 = psi Pounds per Square Inch (psi) Bar psi 14.504 = bar Pounds per Square Inch (psi) Kio Pascas (kpa) psi 0.145 = kpa Pounds per Square Inch (psi) Mega Pascas (MPa) psi 145 = MPa Pounds per Square Inch (psi) Kiograms per cm 2 (kg/cm 2 ) psi 14.223 = kg/cm 2 Specific Gravity To Convert from: To: Use this formua: Kiograms per meter 3 (kg/m 3 ) Specific Gravity (SG) kg/m 3 x 0.001 = SG Pounds per foot 3 (b/ft 3 ) Specific Gravity (SG) b/ft 3 62.4 = SG Degrees API Specific Gravity (SG) 141.5 (API +131.5) = SG Specific Gravity (SG) Kiograms per meter 3 (kg/m 3 ) SG x 1000 = kg/m 3 Specific Gravity (SG) Pounds per foot 3 (b/ft 3 ) SG x 62.4 = b/ft 3 Specific Gravity (SG) Degrees API (141.5 SG) 131.5 = API Length To Convert from: To: Use this formua: miimeters (mm) Inches (in.) mm 25.4 = in. meters (m) Feet (ft.) m x 3.281 = ft. Inches (in.) miimeters (mm) in. x 25.4 = mm Feet (ft.) meters (m) ft. 3.281 = m Temperature To Convert from: To: Use this formua: Degrees Fahrenheit ( F) Degrees Centigrade ( C) ( F 32) 1.8 = C Degrees Centigrade ( C) Degrees Fahrenheit ( F) (1.8 x C) + 32 = F Fuid Fow Rates To Convert from: To: Use this formua: Feet per Second (FPS) Gaons per Minute (GPM) FPS x 448.83 x A1 = GPM Kiograms per Hour (kg/h) Gaons per Minute (GPM) (kg/h kg/m 3 ) x 4.403 = GPM Meters per Second (m/s) Gaons per Minute (GPM) m/s x A2 x 15,852 = GPM Cubic meters per Hour (m 3 /hr) Gaons per Minute (GPM) m 3 /hr 0.2271 = GPM Gaons per Minute (GPM) Feet per Second (FPS) GPM (448.83 x A1) = FPS Gaons per Minute (GPM) Kiograms per Hour (kg/h) GPM x kg/m 3 4.403 = kg/h Gaons per Minute (GPM) Meters per Second (m/s) GPM (A2 x 15,852) = m/s Gaons per Minute (GPM) Cubic meters per Hour (m 3 /hr) GPM 4.4 = m 3 /hr Variabes: A1 = Area of pipe in square feet (ft 2 ) A2 = Area of pipe in square meters (m 2 ) kg/m 3 = Specific gravity in kiograms/cubic meter 58/60 Registered Quaity System to ISO 9001:2008

Mechanica Leve Switches Weights The approximate shipping weights shown beow are for standard modes. Weights wi vary based on pipe size, ength and fange size. Consut the factory for the weight of a specific unit. Foats Dispacers Mode pounds kiograms Page Mode pounds kiograms Page 101* 102* 103* 108 109* 121* 122* 123* 124* 201* 202* 203* 204* 205* 206* 207* 208 209* 221* 301 303 304 401 402 403 404 405 55 80 130 130 125 40 50 80 90 45 26 26 26 45 45 45 48 62 22 12 12 12 15 12 28 15 12 25 37 60 59 53 18 23 36 42 20.5 12 12 12 20.5 20.5 20.5 22 29 10 5.5 5.5 5.5 7 5.5 12.5 7 19 12 12 12 21 12 12 12 12 12 17 17 17 17 17 17 17 17 17 17 23 23 23 26 26 26 26 26 701 702 703 704 705 706 707 708 730 731 732 733 734 735 736 737 740* 741* 742* 743* 750 751 752 753 754 755 756 406 70 32 26 757 801* 802 803* 804 18 18 30 30 20 30 32 32 20 20 32 32 22 22 34 34 28 48 60 68 24 24 36 36 26 26 38 38 115 185 35 50 8.5 8.5 13.5 13.5 9 9 14.5 14.5 9 9 14.5 14.5 10 10 15.5 15.5 12.5 22 27 31 11 11 16 16 12 12 17 17 51 82 16 22.5 *Add weights from the tabe beow to the base mode weight for VV, VVT, or VH configurations with fanges. VV, VVT and VH Additiona Weights Size 150# 300# 600# Weights shown in this tabe incude two fanges, pipe nippes, and fittings. Note: Consut the factory for additiona weight due to accessories or nonstandard requirements. 36 36 36 36 36 36 36 36 39 39 39 39 39 39 39 39 33 29 29 29 43 43 43 43 43 43 43 43 29 29 33 33 pounds kiograms pounds kiograms pounds kiograms 1 5 2.5 8 4 9 4.5 11/2 8 4 15 7 15 7 2 12 5.5 16 7.5 18 8.5 Registered Quaity System to ISO 9001:2008 59/60

SOR offers a fu ine of commerciagrade process instruments. echosonix Leve Transmitters Leve Switches Leve Temperature Switches Pressure Temperature Pressure Switches Fow Switches Fow Process Instrumentation We Deiver Quaity On Time SOR Inc. 14685 West 105th Street Lenexa, Kansas 66215 Phone To Free 8006766794 Fax 9138880767 SOR Europe, Ltd. Farren Court Cowfod West Sussex RH13 8BP United Kingdom Phone 44 (0)1403 864000 Fax 44 (0)1403 864040 SOR China Room 903, No. 10 Buiding Wan Da Paza No. 93 Jian Guo Road Chao Yang District Beijing, China 100022 Phone +86 (10) 5820 8767 Fax +86 (10) 5820 8770 Registered 60/60 Quaity System Registered to ISO 9001:2008 Quaity System to ISO 9001:2008 (04.11) 2011 SOR Inc.