DAF was also involved in the construction of large numbers of passenger-carrying trailers, mainly for Dutch State Railways and its associate companies. (Courtesy Niels Jansen collection) However, the brothers were much busier behind the scenes, negotiating with the Dutch ministry of trade to decide how much government finance could be added to DAF s own resources in order to build and equip a new plant dedicated to vehicle production. While negotiations were taking place, Hub was busy finalising the designs of the very 12 first DAF trucks, which were launched in September 1949. Needless to say, these first DAF production trucks were loosely based on the DT5 prototype, built during the war years, which had travelled more than 100,000km without any major problems. The 3.5-ton capacity A-30 and the 5-ton A-50 were the
1900AS 6x2. (Courtesy Niels Jansen) followed a year later by the extra-heavy duty ATE 2400 6x4 chassis, built especially for export to European countries and beyond. However, DAF never lost its core focus on its delivery and long-haul trucks, and to support its increasing sales into the international haulage sector further variations on the flagship 2600 theme were introduced in 1967, with trailing axle (AS) 6x2 and double-drive (AT) 6x4 configurations being launched. In addition, the heavy end of the DAF product range was further enhanced, in 1968, with the introduction of a new series of DAF-developed 11.6-litre 24 naturally aspirated engines, known as the K-series. The DK 1160 produced 230bhp SAE, whilst the DKA 1160 made ingenious use of tuned-length induction ram-pipes to boost the peak output to 250bhp. Both were naturally aspirated units. The introduction of these new high-capacity engines at the 1968 Amsterdam RAI exhibition tended to overshadow the unveiling of the prototype of the brand new, mid range, 8.25-litre DH825 cross-flow engine that DAF s engineers were developing, and which would finally become available two years later.
The F3300 was followed into production by upgrades to the smaller F218 cabbed trucks and tractors. The lightweight F2100 series was launched with the 210bhp version of the 8.25-litre diesel, and this was complemented by a new F2300, as well as the F2500 featuring a second-generation 8.25-litre diesel producing 250bhp. It was this new family of relatively high-powered lightweight trucks and tractors that replaced the 260bhp F2800 series. With new products and upgrades flowing out of Eindhoven on a regular basis, DAF entered the 1980s in high spirits but behind the scenes, its partnership with International Harvester was not working out as planned. Whilst DAF had enjoyed the financial input from IH s original 33 per cent share purchase, (which was increased to 37.5 per cent in 1980), the deal had never brought about a successful formula for the sharing of technology, designs, and, most importantly, markets. One of the strangest DAFs was the MAG3300, custom-built especially for the air cargo industry. To ensure maximum body capacity the engine and cab were as far forward as possible, meaning twin radiators had to be installed ahead of the front wheels, but behind the cab steps. It is believed that a number of variations of the maximum capacity body theme were explored by DAF, including versions based on the integral bus chassis, and there were even versions built in conjunction with specialist truck builder GINAF. (Courtesy Niels Jansen) 38
72 Two DAF BD 52s. The 1951 coach nearest the camera has bodywork by Van Rooyen, whilst the 1954 behind has bodywork by Jongerius. (Courtesy Niels Jansen collection)
Specialist truck builder GINAF is best known for using DAF cabs, engines and axles on its 10x8 dump trucks, so this huge recovery truck with four steering axles is something of a monster. (Courtesy Niels Jansen) also known as DAF Service Partner in Germany and DAFaid in the UK. The philosophy behind the launch of ITS was simply that as a provider of high-quality transport equipment, DAF should be supporting this with the establishment and maintenance of a high-quality service organisation. Calls to the ITS central helpline are answered by operators, each of whom speaks at least four languages. Assistance is not limited to the vehicle only; it is also provided for the trailer, the load, and even the driver. Recovery operators selected to become part of the ITS team make it their task to get stranded DAF trucks back on the road within 24 hours a goal that was achieved in 90 per cent of cases right from day one. In the UK, DAFaid uses one central telephone number, manned by experts 24/7. When first launched, the service set a new bench mark in vehicle support by providing not only the expected emergency recovery and repair service, but also information on lorry parks, 103