Product s Information Model FA10i (Dwg. MHP2947) Save These Instructions Form MHD56400 Edition 1 October 2007 45878592 2007 Ingersoll Rand Company
Only allow Ingersoll Rand trained technicians to perform maintenance on this product. For additional information contact Ingersoll Rand Factory or nearest Distributor. For additional supporting documentation refer to Table 1 Product Information Manuals on page 2. Manuals can be downloaded from www.winchandhoistsolutions.com. The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased performance and increased maintenance and may invalidate all warranties. The original language of this manual is English. Refer all communications to the nearest Ingersoll Rand Office or Distributor. Table 1: Product Information Manuals Publication /Document Publication /Document Product Safety Information Manual (Non-Man Rider) MHD56250 Product Maintenance Information Manual MHD56401 Product Information Manual MHD56399 Product Safety Information Manual (Man Rider) MHD56251 TABLE OF CONTENTS Page s Ordering Information...3 Drum, Base And Reduction Gear Assembly Drawing...4 Drum, Base And Reduction Gear Assembly s List...5 Drum and Siderail s List...6 Muffler Assembly Drawing And s List...7 Shut-Off Valve Assembly Drawing and s List...7 Motor Assembly Drawing...8 Motor Assembly s List...9 Reduction Gear Assembly Drawing...10 Reduction Gear Assembly s List...11 Disc Brake Assembly Drawing...12 Disc Brake Assembly s List...13 Manual Band Brake (Optional) Assembly Drawing...14 Manual Band Brake (Optional) Assembly s List...15 Automatic Band Brake (Optional) Assembly Drawing...16 Automatic Band Brake (Optional) Assembly s List...17 Control Valve Assembly Drawing...18 Control Valve Assembly s List...19 Emergency Stop And Overload Control Valve Assembly Drawing...20 Emergency Stop And Overload Control Valve Assembly s List...21 Full Flow Remote Control Valve (Optional) Assembly Drawing And s List...22 Pendant Operated Overload (Optional) Assembly Drawing And s List...23 Pendant Operated Pilot Control Valve (Optional) Assembly Drawing...24 Pendant Operated Pilot Control Valve (Optional) Assembly s List...25 Remote Pendant (Optional) Assembly Drawings...26 Remote Pendant (Optional) Assembly s List...27 Limit Switch (Optional) Assembly Drawing...28 Limit Switch (Optional) Assembly s List...29 Brake Line Connections Assembly Drawings...30 Brake Line Connections Assembly s List...31 Drum Locking Pin (Optional) Assembly Drawing And s List...32 Press Roller Assembly Drawing...34 Press Roller Assembly s List...35 Underwind Reversing Manifold (Optional) Assembly Drawing And s List...36 Drum Guard Assembly Drawing...38 Drum Guard Assembly s List...39 Label Drawing And s List...40 Accessories...40 Air Preparation Assembly Drawing And s List...41 Construction Cage (Optional) Assembly Drawing And s List...42 Warranty...43 Dwg. Name Page. (Dwg. MHP2948)...4.. (Dwgs. MHP2949 and MHP2958)...7. (Dwg. MHP1007)...8. (Dwg. MHP0875)...10. (Dwg. MHP2944)...12. (Dwg. MHP0627)...14. (Dwg. MHP2329)...16. (Dwg. MHP2696)...18. (Dwg. MHP2697)...20. (Dwg. MHP2698)...22 (Dwg. MHP0698)...23 (Dwg. MHP2778)...24. (Dwgs. MHP2346 and MHP1677)...26. (Dwg. MHP2677)...28. (Dwg. MHP2239)...30. (Dwg. MHP2675)...32 (Dwg. MHP2945)...34. (Dwg. MHP2939)...36 (Dwg. MHP2946)...38. (Dwg. MHP2947)...40. (Dwg. MHP2679)...41 (Dwg. MHP2045)...42 2 Form MHD56400 Edition 1
PARTS ORDERING INFORMATION These products are designed and constructed to provide long, trouble-free service. In time it may be necessary to order and install new parts to replace those that have been subjected to wear. For your convenience and future reference, it is recommended that the following information be recorded. Model Serial Date Purchase When ordering replacement parts, please specify the following: 1. Complete model number and serial number as it appears on the data (name) plate. 2. number(s) and part description as shown in this manual. 3. Quantity required. The data (name) plate is located on the product. NOTICE Continuing improvement and advancement of design may cause changes to this equipment which are not included in this manual. Manuals are periodically revised to incorporate changes. Always check the manual edition number on the front cover for the latest issue. Sections of this manual may not apply to your product. Using other than genuine Ingersoll Rand replacement parts may invalidate the warranty. Return Goods Policy Ingersoll Rand will not accept any returned goods for warranty or service unless prior arrangements have been made and written authorization has been provided from the location the goods were purchased. Products that have been modified without Ingersoll Rand approval, mishandled or overloaded will not be repaired or replaced under warranty. A printed copy of the warranty that applies to this product is provided inside the back cover of this manual. Disposal For additional information contact: Ingersoll Rand 2724 Sixth Avenue South Seattle, WA 98134 USA Phone: (206) 624-0466 or (866) 273-3278 Fax: (206) 624-6265 When the life of the product has expired, it is recommended that it be disassembled, degreased and parts separated as to materials so that they may be recycled. or Ingersoll Rand Douai Operations 529, Avenue Roger Salengro 59450 Sin Le Noble, France Phone: (33) 03-27-93-08-08 Fax: (33) 03-27-93-08-00 Form MHD56400 Edition 1 3
DRUM, BASE AND REDUCTION GEAR ASSEMBLY DRAWING 43 41 39 15 62 45 49 37 38 36 64 13 14 1 33 6 2 5 216 96 97 48 47 52 63 117 50 197 194 40 42 306 582 193 184 192 191 188 186 185 119 183 98 117 (Dwg. MHP2948) 4 Form MHD56400 Edition 1
1 Disc Brake Assembly (includes items 1, 7 through 12, and 15 through 31) DRUM, BASE AND REDUCTION GEAR ASSEMBLY PARTS LIST 1 382-32456 64 Retainer Ring 1 51192 2 Capscrew (with disc brake) 8 71087100 96 Drum 1 Note 1 5 O Ring 1 51459 Wire Rope Anchor - 1-1/8 inch 382-33285 6 Motor Adapter 1 14227 97 Wire Rope Anchor - 7/8 and 1 inch 1 382-33286 13 O Ring (Drive Shaft) 1 52537 Wire Rope Anchor - 3/4 inch 382-33287 14 Seal Sleeve 1 11711 98 Siderail 2 Note 1 15 O Ring 1 51460 117 Washer 20 71343768 33 O Ring 1 51458 119 Capscrew 8 71449912 36 Retainer Ring 1 52678 183 Pin, Dowel 12 53770 37 Bearing 1 50998 Upright, Outboard 1 382-33045 184 38 Retainer Ring 1 51761 Upright, Outboard (with drum lock) 1 382-33045-L 39 Capscrew 24 71306450 185 Nameplate 1 71070643-R 40 Pin, Dowel 2 51468 186 Screw, Drive 4 71028849 41 Drum Shaft 1 14167 188 Bearing 1 52534 42 Upright, Inboard 1 382-32994 191 Bearing Retainer 1 382-33138 43 O Ring 1 52536 192 Screw 4 50964 45 Retainer Ring 1 52541 End Cover 1 382-32264 193 47 Reduction Gear Assembly 1 11626 End Cover (limit switch) 1 382-32265 48 Nut 18 50812 194 Lifting Lug 2 382-33500 49 Coupling 1 11901 197 Capcrew 12 45879939 50 Capscrew 18 53769 216 Motor Flange 1 K5B-502 52 Adapter 1 28582 306 Washer 6 52914 62 Pin, Dowel 2 52334 582 Capscrew 6 71391080 63 Capscrew 18 71458194 - - - Spacer (no disc brake) 1 382-29940 Recommended spare for one winch, 2 years of normal operation. Note 1: Refer to DRUM AND SIDERAIL PARTS LIST on page 6. These parts also come in a cold weather version. Refer to model code. Adding CH (DNV) or CHA (ABS) to the end of these part numbers is required to retain winch cold weather certification. Example: Order Drum Shaft item (41) part number 14167 as part number 14167CH. Certification Type Example To Order ABS --- 14167CHA DNV 14167CH --- Form MHD56400 Edition 1 5
DRUM AND SIDERAIL PARTS LIST Drum ( 96) With Band Brake Drum ( 96) Without Band Brake ** Drum (24 inch) 382-32503-5 Drum (24 inch) 382-32504-5 Drum (30 inch) 382-32503-6 Drum (30 inch) 382-32504-6 Drum (36 inch) 382-32503-7 Drum (36 inch) 382-32504-7 Drum (40 inch) 382-32503-8 Drum (40 inch) 382-32504-8 Drum (50 inch) 382-32503-9 Drum (50 inch) 382-32504-9 Siderail ( 98) With Brake Band Siderail ( 98) Without Brake Band Siderail (24 inch Drum) 382-33080-5 Siderail (24 inch Drum) 382-33079-5 Siderail (30 inch Drum) 382-33080-6 Siderail (30 inch Drum) 382-33079-6 Siderail (36 inch Drum) 382-33080-7 Siderail (36 inch Drum) 382-33079-7 Siderail (40 inch Drum) 382-33080-8 Siderail (40 inch Drum) 382-33079-8 Siderail (50 inch Drum) 382-33080-9 Siderail (50 inch Drum) 382-33079-9 ** Contact your nearest Ingersoll-Rand distributor or the factory for additional replacement part information. These parts also come in a cold weather version. Refer to model code. Adding CH (DNV) or CHA (ABS) to the end of these part numbers is required to retain winch cold weather certification. Example: Order Drum (item 96) (24 inches long) part number 382-32503-5 as part number 382-32503-5CH or 382-32503-5CHA. 6 Form MHD56400 Edition 1
MUFFLER ASSEMBLY DRAWING AND PARTS LIST 177 165 163 169 171 174 170 (Dwg. MHP2949) 163 Pipe Nipple 2 71311252 165 Reducer Bushing 1 71057459 167 Pipe Nipple * 1 71057467 169 Pipe Elbow 1 71057434 170 Muffler 1 50594 171 Pipe Nipple 1 Contact Factory 174 Muffler 1 52472 177 Pipe Elbow 1 54299 * not illustrated. SHUT-OFF VALVE ASSEMBLY DRAWING AND PARTS LIST 958 592 (Dwg. MHP2958) 592 Ball Valve 1 71416911 958 Fitting, Nipple 1 71311252 Form MHD56400 Edition 1 7
MOTOR ASSEMBLY DRAWING (Dwg. MHP1007) 8 Form MHD56400 Edition 1
MOTOR ASSEMBLY PARTS LIST 199 Motor Assembly ** 1 K5B-550 229 Button Head Screw 5 K5B-541 3 Lockwasher 10 71268213 230 Oil Slinger 1 K5B-540 4 Capscrew 10 71268205 231 Crank Assembly 1 K5B-A516 200 Capscrew 20 52317 232 Sleeve 1 K5B-519 201 Cylinder 5 K5B-505 233 Bushing 1 K5B-511 202 Compression Ring 1 Set K5B550-KRING 234 Connecting Rod Ring 2 K5B-510 203 Wrist Pin 5 HU-514A 235 Lock Pin 1 HU-K520 204 Piston* 5 * 236 Cotter Pin 1 53456 205 Retainer Ring 10 902A45-632 237 Pin Nut 1 D02-394 206 Connecting Rod 5 K5B-509 240 Roll Pin 1 54257 207 Oil Ring 1 Set K5B550-KRING 243 Gasket 2 K5B-928 208 Plug 1 71263297 244 O Ring 1 20A11CM248 209 Head Gasket 1 Set K5B-507-5 246 Grease Fitting 1 53095 210 Vent Cap Assembly 1 26604 247 Rotary Valve Housing 1 K5B-545 213 Eye Bolt 2 KU-888 250 Rotary Valve 1 K5B-526EQ-RS 214 Nameplate 1 K5B-301 251 Seal Ring 1 Pack K5B-607A 215 Drive Screw 1 Pack R4K-302-12 252 Bearing 1 50138 216 Mounting Flange 1 K5B-502 253 Capscrew 5 51471 217 Motor Housing 1 K5B-501A 254 Exhaust Flange 1 K5B-276M 218 Pipe Plug 2 54912 500 Valve Assembly 1 K5C2 226 Gasket 1 K5B-592-1 546 Gasket 1 Set 27115 227 Oil Seal 1 51873 549 Lockwasher 4 71376370 228 Crank Bearing 2 51066 551 Capscrew 4 71369276 * s not sold separately. Refer to Table 2 Motor Assembly Kit List on page 9. ** Motor Assembly consists of items 3, 4, 200 through 260, and 546. Table 2: Motor Assembly Kit List Motor Gasket Kit (includes items 202, 207, 209, 226, 243, 244, 248 and 317) 1 26823 231 Crank Assembly (includes items 206 and 228 through 237) 1 K5B-A516 250 Rotary Valve Assembly (includes items 243, 251 and 252) 1 K5B-526EQ-RS 261 Piston Assembly (includes items 202 through 205 and item 207) 1 K5B-A513-50 Recommended spare for one winch, 2 years of normal operation. Note: Kit number K5B550-KRING consists of (5) Compression Rings item 202 and (5) Oil Rings item 207. Form MHD56400 Edition 1 9
REDUCTION GEAR ASSEMBLY DRAWING (Dwg. MHP0875) 10 Form MHD56400 Edition 1
47 Reduction Gear Assembly (includes items 400 through 453) REDUCTION GEAR ASSEMBLY PARTS LIST 1 11626 426 Cylinder Roller Bearing * 1 71308233 400 Seal Support 1 71419154 427 Retainer Ring 1 71308241 401 Capscrew 5 154-2522 428 Spacer* 1 402 Oil Seal 1 71308175 429 Sun Gear* 1 403 O Ring 1 71308183 430 Planetary Assembly* 1 404 Spring Pin 3 154B2240 433 Sun Gear* 1 Order 47 405 Support* 1 Order 47 434 O Ring 2 Order 460 406 Plug 15 71068571 435 Retainer Ring 1 71068597 407 Bearing* 1 71308191 436 Ring Gear* 1 Order 47 408 O Ring 2 71308209 437 Spring Pin 3 71106710 409 Ring Gear* 1 438 Input Housing* 1 410 Planetary Support* 1 439 Capscrew* 12 412 Spring Pin* 6 440 Planetary Assembly* 1 Order 47 413 Thrust Bearing* 6 442 O Ring 2 Order 460 414 Roller Bearings* 240 Order 47 443 Spring Pin 4 71068472 415 Planet Gears* 3 444 Ring Gear* 1 416 Roller Spacer* 3 445 Shaft* 1 417 Planet Gear Shaft* 3 446 End Cover* 1 Order 47 418 Spacer* 1 447 Gasket 1 71308225 419 O Ring 1 Order 460 448 Capscrew 8 154-2528 420 Retainer Ring* 1 449 Thrust Plate 1 154-1711 422 Spacer* 2 450 Front Cover 1 154-1802 Order 47 423 Spacer* 1 452 Capscrew 4 154-2576 424 Input Housing* 1 453 Adjusting Screw 1 154-2601 425 Capscrew 3 71419147 * s not sold separately. Table 3: Reduction Gear Assembly Kit List 460 O Ring Repair Kit (includes items 408, 434 and 442) 1 27353 Recommended spare for one winch, 2 years of normal operation. Form MHD56400 Edition 1 11
DISC BRAKE ASSEMBLY DRAWING 41 15 23 87 30 29 85 22 86 31 11 39 89 12 19 88 24 21 16 17 10 38 9 7 8 2 3 6 (Dwg. MHP2944) 12 Form MHD56400 Edition 1
DISC BRAKE ASSEMBLY PARTS LIST 1 Disc Brake Assembly (includes items 1, 7 through 12, and 15 through 31) 1 382-32456 21 Brake Housing 1 382-32457 2 Capscrew (with disc brake) 8 71087100 22 Fitting, Reducer Bushing 1 51803 3 Lockwasher 18 50181 23 Breather 1 51857 6 Motor Adapter 1 14227 24 Pipe Plug 2 51467 7 Input Shaft (with disc brake) 1 11595 27 Tubing * 1 52520 8 Brake Reaction Plate 1 10597 28 Fitting, Nut * 2 55013 9 Spring 15 50751 29 Fitting, Vented 1 20770 10 Brake Piston 1 382-31002 30 Dump Valve 1 50276 11 Seal 1 71444822 31 Fitting, Nipple 1 50859 12 Seal 1 51462 38 Retainer Ring 1 51761 15 O Ring 1 51458 85 Reaction Ring 1 382-32608 16 Friction Plate 7 71126874 86 Fitting, Tee 1 71063374 17 Drive Plate 8 382-31004 87 Pressure Gauge 1 43806249 19 Geared Hub 1 382-32459 88 Label, Low Pressure 1 71465942 20 Fitting, Sleeve * 2 55014 89 Rivet 2 71028849 Recommended spare for one winch, 2 years of normal operation. These parts also come in a cold weather version. Refer to model code. Adding CH (DNV) or CHA (ABS) to the end of these part numbers is required to retain winch cold weather certification. Example: Order Input Shaft (item 7) part number 11595 as part number 11595CH or 11595CHA. * not illustrated. Certification Type Example To Order ABS --- 11595CHA DNV 11595CH --- Form MHD56400 Edition 1 13
MANUAL BAND BRAKE (OPTIONAL) ASSEMBLY DRAWING 104 105 109 112 96 111 110 114 129 113 108 128 106 125 102 103 120 98 127 118 117 119 126 122 115 123 124 98 116 117 (Dwg. MHP0627) 14 Form MHD56400 Edition 1
100 Manual Band Brake Assembly (includes items 104 through 129) MANUAL BAND BRAKE (OPTIONAL) ASSEMBLY PARTS LIST 1 382-33365 115 Locknut 4 71445316 96 Drum (for use with brake band) 1 116 Capscrew 2 54221 * 98 Siderail 2 117 Washer 4 71343768 102 Nut 2 103 Lockwasher 2 Order item 109, U Bolt Order item 109, U Bolt 118 Anchor 1 12096 119 Capscrew 2 71449912 104 Handwheel 1 12183 120 Nut 1 50159 105 Grease Fitting 1 51469 122 Plate 1 12084 106 Capscrew 2 71445407 123 Washer 4 71274815 108 Bracket 1 12203 124 Capscrew 4 71316533 109 U Bolt (includes items 102 and 103) 1 52701 125 Washer 2 71055206 110 Nut 1 51775 126 Support 1 12094 111 Bearing 1 52707 127 Adjustment Screw 1 54424 112 Tube 1 12204 128 Brake Band 1 set 382-33363 113 Spring 1 52717 129 Handle 1 45875465 114 Brake Screw 1 12182 Recommended spare for one winch, 2 years of normal operation. * Refer to DRUM AND SIDERAIL PARTS LIST on page 6. These parts also come in a cold weather version. Refer to model code. Adding CH (DNV) or CHA (ABS) to the end of these part numbers is required to retain winch cold weather certification. Example: Order Brake Band (item 128) part number 382-33363 as part number 382-33363CH or 382-33363CHA. Certification Type Example To Order ABS --- 382-33363CHA DNV 382-33363CH --- Form MHD56400 Edition 1 15
AUTOMATIC BAND BRAKE (OPTIONAL) ASSEMBLY DRAWING 25 34 56 35 54 55 54 57 58 44 59 46 51 53 32 61 60 126 117 118 130 119 134 101 74 122 115 123 124 120 127 67 117 116 117 65 44 68 73 69 70 71 101 (Dwg. MHP2329) 16 Form MHD56400 Edition 1
AUTOMATIC BAND BRAKE (OPTIONAL) ASSEMBLY PARTS LIST 139 Brake Band Assembly 1 382-33366 69 Fitting, Hose End 2 53954 25 Capscrew 2 50912 70 Fitting, Nipple 1 71009385 32 Washer 2 52915 71 Exhaust Valve 1 EV30-A 34 Lever Arm, Left Side 1 28647 73 Fitting, Nipple 1 71107494 35 Spacer 2 28654 74 Bracket 1 28675 44 Cotter Pin 4 50965 101 Breather 2 71385611 46 Pin 1 28688 115 Locknut 4 71445316 51 Clevis 1 28676 116 Capscrew 1 45878840 53 Bushing 1 71393128 117 Washer 5 71343768 54 Bushing 4 71392203 118 Anchor 1 12096 55 Pivot Nut 1 28644 119 Capscrew 2 71449912 56 Link Stud 1 28643 120 Jam Nut 1 50159 57 Cotter Pin 2 50957 122 Plate 1 12084 58 Pin 1 28655 123 Washer 4 71274815 59 Brake Band 1 Set 382-33364 124 Capscrew 4 71316533 60 Nut 2 71418651 126 Support 1 12094 61 Lever Arm, Right Side 1 28648 127 Adjustment Screw 1 54424 65 Pin 1 28689 130 Nut 1 71393193 67 Capscrew 2 51010 134 Cylinder 1 71393151 68 Hose (bulk) 1 53245 Recommended spare for one winch, 2 years of normal operation. These parts also come in a cold weather version. Refer to model code. Adding CH (DNV) or CHA (ABS) to the end of these part numbers is required to retain winch cold weather certification. Example: Order Brake Band item (59) part number 382-33364 as part number 382-33364CH. Certification Type Example To Order ABS --- 382-33364CHA DNV 382-33364CH --- Form MHD56400 Edition 1 17
CONTROL VALVE ASSEMBLY DRAWING (Dwg. MHP2696) 18 Form MHD56400 Edition 1
CONTROL VALVE ASSEMBLY PARTS LIST 900 Control Valve Assembly 1 K5C2-ELP 937 Spring 1 26966 89 Rivet 2 71028849 938 Buttonhead Screw 2 71394407 214 Plug 1 71263297 939 Seal Bracket (Note 2) 1 28733-S 901 Capscrew 9 71342034 940 Tag, No FA2B 1 71392757 902 Washer 8 71303408 941 O Ring 1 71357198 903 Poppet Cover 1 26997 942 O Ring 2 51651 904 Poppet Gasket 1 27064 Reverse Valve Kit (Normal)** 1 27925-SX 905 Poppet Spring 1 71351068 943 Reverse Valve (Reverse Bias)** 1 28002 906 Poppet Cap 1 28734 Reverse Valve (Unbiased) 1 **** 907 Poppet Seal 1 26991 Bushing (Normal)*** 1 26686 909 Washer, Tablock 1 71398051 944 Bushing (Reverse Bias)*** 1 27450 910 Pilot Valve Assembly 1 28696 Bushing (Unbiased) 1 **** 912 Plug 1 71267561 945 Dowel Pin 1 71146674 916 Ball 1 D10-280 946 Gasket Set 27115 917 Valve Housing 1 * 948 Label, Throttle Direction 1 71352777 918 Cover Gasket 1 26999 949 Washer 4 71413355 919 Piston Cover 1 26998 950 Plug 1 71366348 920 IR Pilot Valve Tool 1 28690 951 Capscrew 4 71431365 921 O Ring 1 52537 955 Exhaust Flange 1 26691 922 Piston (Note 1) 1 28735-S 956 Fitting, Elbow 1 71367932 923 O Ring 1 71355796 957 Fitting, Elbow 1 54299 924 Washer 2 71271985 958 Fitting, Nipple 2 71311252 925 Capscrew 2 71348338 959 Muffler 1 52472 930 Handle Assembly 1 27239-1 960 Label, Warning 1 71373229 935 Plug 1 71348965 962 Breather 1 51559 * 917 not sold separately, order item 900 ** Reverse Valve (Normal) for Standard Overwound operation. Reverse Valve (Reverse Bias) for Optional Underwound operation. *** Ensure Bushing matches Reverse Valve (Reverse Valve (Normal) and Bushing (Normal)). Mixing these components can result in erratic winch operation. **** Reverse Valve (Unbiased), and Bushing (Unbiased) contact factory for application. Note 1: 922 not sold separately, includes items (6) each of 901 and 902, items 904-907, 918, 921 and 923. Note 2: 939 not sold separately, includes items (1) each of 901 and 902, items 924, 925, 935, 937, 938 and 940. Table 4: K5C2-X and K5C2-EX Control Valve Service Kits 780 Kit K5C2 Control Valve Service Kit, both standard and -E (includes items 96, 703, 713, 714, 722, 901, 902, 904, 907, 910, 916, 918, 921, 923, 941, 942 and 946) 1 27240 782 Handle Assembly Kit (includes items 901, 902 and 930; 1 each) 1 27239 784 Reverse Valve Kit (includes items 943 and 956) 1 27925-SX 786 Overload Valve Service Kit 1 27995-X 788 Emergency Stop Service Kit 1 27994-X 789 Emergency Stop Kit (Optional Feature) 1 28026 910 Pilot Valve Assembly Kit 1 28696 922 Piston Kit 1 28735-S 939 Seal Bracket Kit (includes items 901, 902, 924, 925, 935, 937-939, 941 and 942) 1 28733-S Recommended spare for one winch, 2 years of normal operation. not illustrated. Form MHD56400 Edition 1 19
EMERGENCY STOP AND OVERLOAD CONTROL VALVE ASSEMBLY DRAWING 700 701 904 903 902 901 704 702 703 906 905 956 Brake Fitting 705 706 707 703 912 910 907 722 955 902 721 901 902 919 918 711 917 89 940 916 723 942 942 726 922 921 960 724 943 944 923 948 214 951 949 945 924 946 925 935 941 942 713 712 963 939 714 715 901 909 930 937 938 717 902 718 719 901 716 720 920 (Dwg. MHP2697) 20 Form MHD56400 Edition 1
EMERGENCY STOP AND OVERLOAD CONTROL VALVE ASSEMBLY PARTS LIST 908 Control Valve Assembly 1 K5C2-EXLP 918 Cover Gasket 1 26999 89 Rivet 2 71028849 919 Piston Cover 1 26998 214 Plug 1 71263297 920 IR Pilot Valve Tool 1 28690 700 Cap 1 27491 921 O Ring 1 52537 701 Grommet 1 71365779 922 Piston (Note 1) 1 28735-S 702 Plunger 1 27490 923 O Ring 1 71355796 703 O Ring 6 71127039 924 Washer 2 71271985 704 Label, Stop 1 95790099 925 Capscrew 2 71348338 705 Button, E-Stop 1 71372601 930 Handle Assembly 1 27239-1 706 Adapter 1 27488 935 Plug 1 71348965 707 Plunger 1 27489 937 Spring 1 26966 711 Spring 1 71365787 938 Buttonhead Screw 2 71394407 712 Piston 1 27964 939 Seal Bracket (Note 2) 1 28733-S 713 O Ring 1 51768 940 Tag, No FA2B 1 71392757 714 Gasket 1 27493 941 O Ring 1 71357198 715 Plate 1 27624 942 O Ring 3 51651 716 O Ring 1 71365795 Reverse Valve Kit (Normal)** 1 27925-XLP 717 Adjustment Nut 1 24374 943 Reverse Valve (Reverse Bias)** 1 ** 718 Spring 1 71053730 Reverse Valve (Unbiased) 1 **** 719 Cover 1 27494 Bushing (Normal)*** 1 382-29739 720 Screw, Adjusting 1 27571 944 Bushing (Reverse Bias)*** 1 *** 721 Capscrew 2 71398879 Bushing (Unbiased) 1 **** 722 O Ring 2 71138135 945 Dowel Pin 1 71146674 723 Exhaust Adapter 1 27540 946 Gasket Set 27115 724 Label Plate, LP 1 71465959 948 Label, Throttle Direction 1 71352777 726 Plug 1 27945 949 Washer 4 71413355 901 Capscrew 11 71342034 951 Capscrew 4 71431365 902 Washer 12 71303408 955 Exhaust Flange 1 26691 903 Poppet Cover 1 26997 956 Fitting, Elbow 1 71367932 904 Poppet Gasket 1 27064 957 Fitting, Elbow (refer to Dwg. MHP2696) 1 71273676 905 Poppet Spring 1 71351068 958 Fitting, Nipple (refer to Dwg. MHP2696) 1 71057483 906 Poppet Cap 1 28734 959 Muffler (refer to Dwg. MHP2696) 1 52472 907 Poppet Seal 1 26991 960 Label, Warning 1 71373229 909 Washer, Tablock 1 71398051 963 Plug 3 28628 910 Pilot Valve Assembly 1 28696 964 Manifold Block 1 382-31727 912 Plug 1 71267561 965 Gasket 1 382-31762 916 Ball 1 D10-280 966 Washer 4 71271985 917 Valve Housing 1 * 967 Capscrew 4 71348338 s 964 through 967 not illustrated. * 917 not sold separately, order item 908. ** Reverse Valve (Normal) for Standard Overwound operation. Reverse Valve (Reverse Bias) for Optional Underwound operation. *** Ensure Bushing matches Reverse Valve (Reverse Valve (Normal) and Bushing (Normal)). Mixing these components can result in erratic winch operation. **** Reverse Valve (Unbiased), and Bushing (Unbiased) contact factory for application. Refer to Control Valve Assembly s List on page 19 for notes and all other kit part numbers. Note 1: 922 not sold separately, includes items (6) each of 901 and 902, items 904-907, 918, 921 and 923. Note 2: 939 not sold separately, includes items (1) each of 901 and 902, items 924, 925, 935, 937, 938 and 940. Form MHD56400 Edition 1 21
FULL FLOW REMOTE CONTROL VALVE (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP2698) 900 Control Valve Assembly 1 K5C2-SBK 321 Fitting, Elbow 4 54270 44 Hose Assembly As Req'd 50923 322 Hose End 4 54738 93 Capscrew 5 51471 323 Hose (bulk) As Req'd 54737 243 Gasket 1 K5B-928 956 Fitting, Elbow 1 71367932 253 Exhaust Cover 1 KK5B-276M 22 Form MHD56400 Edition 1
PENDANT OPERATED OVERLOAD (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP0698) 369 Adapter 1 24373 389 O Ring 1 50557 386 Setscrew 1 71266589 713 O Ring 2 51768 387 Piston 1 24372 717 Adjustment Nut 1 24374 388 Plug, Orifice 1 382-31313 718 Spring 1 71053730 Form MHD56400 Edition 1 23
PENDANT OPERATED PILOT CONTROL VALVE (OPTIONAL) ASSEMBLY DRAWING (Dwg. MHP2778) 24 Form MHD56400 Edition 1
PENDANT OPERATED PILOT CONTROL VALVE (OPTIONAL) ASSEMBLY PARTS LIST 96 Washer (2) 4 71376370 357 Inlet Poppet 2 23517 330 Valve Assembly: Single Air Brake PTV 358 Gasket 1 71264725 359 Fitting, Elbow 1 71262299 Single air Brake -E Option 1 360 'O' Ring 2 52662 Contact Factory Dual Air Brakes 361 Poppet Seat 2 23518 Dual Air Brakes -E Option 362 Retainer Ring 2 53833 331 Valve Shaft 1 23522 363 'O' Ring 2 52573 332 Restrictor, Poppet 1 23523 364 Valve Piston 2 23519 333 Restrictor, Seat 1 23524 365 Retainer Ring 2 71138010 334 'O' Ring 1 71137988 366 Capscrew 4 71138069 335 Pin 2 71293179 367 Pilot Cap Assembly 2 28433 336 Pin 2 71293161 368 Capscrew 4 71138077 337 Setscrew 1 Contact Factory Adapter, Standard 23514 369 1 338 Sleeve 1 23606 Adapter, -E Option 24373 339 Valve Body 1 * 370 Capscrew 4 71138085 340 Gasket 2 23592 371 Shims (3) 71138119 341 Pin (Note 1) 1(2) 381 Capscrew 1 53807 Valve Assembly (Note 1) 1(2) 23594 383 Capscrew 2 71261713 'O' Ring (Note 1) 2(4) 384 Pendant Bracket 1 24442 342 Manifold 1 382-31755 385 Valve Cap Assembly 2 28433 343 Spring Clip 1 24793 386 Capscrew 2 71303671 344 Washer 1 50899 387 Seal Washer 2 71303838 345 Capscrew 2 71261747 388 Shuttle Valve Body 1 24146 346 Gasket 1 382-31761 389 Fitting, Elbow 2 Contact Factory 347 Pin 1(2) 71146195 713 'O' Ring 2 51768 354 Exhaust Poppet 1 23516 924 Washer 8 71271985 355 Plug 1 51897 951 Capscrew 4 71431365 356 Spring 2 71138028 Recommended spare for one winch, 2 years of normal operation. * not sold separately, order item 330. ** not illustrated, part of valve cap assembly. Note 1: Refer to the following to determine Pin (347) and Valve Assembly (341) configuration requirements: Winches without disc or automatic band brake use quantity of 2 pins (347). Winches with a single automatic brake (disc or band) (Valve Assembly 25439 or 25440) use quantity of 1 Pin (347) and 1 Valve Assembly (341). Winches with disc and automatic band brakes (Valve Assemblies 25441 or 25468) use quantity of 2 Valve Assemblies (341). Note 2: Quantity of 4 Washers (96) required to mount Adapter (369). Additional Washers (96) and Shim (371) quantities are As Required to establish clearance tolerances described in the Product Maintenance Information Manual. Form MHD56400 Edition 1 25
REMOTE PENDANT (OPTIONAL) ASSEMBLY DRAWINGS Pendant without Emergency Stop (Dwg. MHP2346) Pendant with Emergency Stop 442 348 440 444 443 453 448 446 447 445 446 449 451 441 456 455 454 449 443 443 452 451 452 457 458 (Dwg. MHP1677) 26 Form MHD56400 Edition 1
REMOTE PENDANT (OPTIONAL) ASSEMBLY PARTS LIST With E-Stop Without E-Stop 353 Pendant Assembly 1 PHS2E PHS2E-U 348 Fitting, Adapter 3 (5) 71048268 440 Lifting Eye 1 64222332 441 Emergency Stop Valve 1 95790108 - - - 442 Valve 3 95790106 - - - 443 O Ring 2(5) 58209229 444 Plug 2(4) 65107741 445 Spring 2(4) 69128541 446 Ball 2(5) 69401625 447 Pin 1 95790040 448 Setscrew 2 42008607 449 O Ring 2(3) 58235329 451 Protector 2(3) 95790107 452 Valve 2(3) 95790104 453 Lever 2 95790122 454 Pendant Handle 1 Order 353 455 Setscrew 3(5) 71078158 456 Label Kit 1 95790111 457 Exhaust Washer 1 67600303 458 Retainer Ring 1 47713030 470 Plug 1 - - - 65129541 Recommended spare for one winch, 2 years of normal operation. PHS2E includes items 440-449 and 451-458 PHS2E-U includes items 440, 443-449, 451-458 and 470 Form MHD56400 Edition 1 27
LIMIT SWITCH (OPTIONAL) ASSEMBLY DRAWING 476 477 507 508 478 479 508 480 481 510 504 505 503 502 501 506 509 501 500 509 484 498 514 482 511 485 486 512 488 489 490 97 96 499 492 492 513 493 491 497 #1 Main Air Hose 494 #3 Haul-in Air Hose 496 450 #4 Payout Air Hose 495 (Dwg. MHP2677) 28 Form MHD56400 Edition 1
475 Limit Switch Assembly (Includes items 488 and 514) LIMIT SWITCH (OPTIONAL) ASSEMBLY PARTS LIST 1 382-32134-S 495 96 Washer 4 71376370 97 Capscrew 4 52160 496 Hose Assembly (42 in. [1067 mm]) stainless steel hose Hose Assembly (42.5 in. [1080 mm]) std. hose Hose Assembly (42.5 in. [1080 mm]) stainless steel hose 1 382-31426-10 1 382-31423-9 382-31426-9 450 Adapter, Limit Switch 1 382-30831 497 Fitting, Adapter 4 71048268 476 Upper Support Block 1 96150556 498 Cap Assembly 1 96150662 477 Capscrew 2 41332006 499 Capscrew 3 71324115 478 Control Valve 2 68558741 500 Lower Support Block 1 96150555 479 Fitting, Hose Tee 1 58255860 501 Spindle Switch Assembly 1 71464127 480 Connection Block 1 382-31427 502 Rod 4 382-31037 481 Fitting, Pipe 1 54242 503 Washer 4 45201008 482 Dump Valve 1 71460760 504 Nut 4 43003511 484 Pin 1 46503420 505 Cover, Housing 1 382-32125 485 O Ring 1 58237529 506 Capscrew 2 41313606 486 Housing 1 382-32124 507 Fitting, Hose Tee 1 71457519 488 Washer 2 45001104 508 Tube 1 68045328 489 Capscrew 1 41311906 509 Fitting, Adapter 4 71457485 490 Gasket 2 69761541 510 Label, Limit Switch Configuration 1 71459929 491 Fitting, Cap 1 71111975 492 Washer 5 71271985 511 Label, Limit Switch Instructions, Underwind Winches Only Label, Limit Switch Instructions, Overwind Winches Only 1 71462337 71446439 493 Capscrew 2 41322606 512 Chain 1 69033232 494 Hose Assembly (37 in. [940 mm]) std. hose Hose Assembly (37 in. [940 mm]) stainless steel hose 495 Hose Assembly (42 in. [1067 mm]) std. hose 1 382-31423-10 1 382-31423-8 513 Nut 1 71386783 382-31426-8 514 S Hook 1 94120206 Form MHD56400 Edition 1 29
BRAKE LINE CONNECTIONS ASSEMBLY DRAWINGS (Dwg. MHP2239) 30 Form MHD56400 Edition 1
BRAKE LINE CONNECTIONS ASSEMBLY PARTS LIST With Emergency Stop and Overload 601 Fitting, Tee 1 51707 602 Fitting, Pipe 1 51704 603 Bushing 1 71039416 604 Fitting, Nipple 3 51034 605 Fitting, Elbow 1 51031 606 Fitting, Connector 1 54679 607 Valve 1 54672 608 Fitting, Elbow 1 51281 610 Fitting, Tee 1 71375372 611 Fitting, Connector 2 52092 612 Fitting, Tee 3 51812 613 Valve, Check 1 71368609 614 Fitting, Pipe 1 50861 615 Fitting, Elbow 4 52182 616 Fitting, Connector 3 51814 617 Fitting, Connector 2 54274 618 Fitting, Elbow 1 71375349 619 Fitting 12 55014 620 Locknut 12 55013 621 Valve 1 71375380 622 Valve, Check 1 71375398 623 Fitting, Reducer 2 71375406 624 Bracket, Support 1 28051 625 Capscrew 2 54277 626 Washer 2 51831 627 Locknut 2 53541 628 Tubing (Bulk) As Req d 52520 740 Fitting, Connector 3 Without Emergency Stop and Overload 742 Fitting, Elbow 1 71372650 - - - 743 Fitting, Reducer 1 53939 - - - 71367908 741 Shuttle Valve 1 50277 745 Tubing, Assembly 1 52520 748 Fitting, Elbow 2 71367767 Form MHD56400 Edition 1 31
DRUM LOCKING PIN (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST 302 141 301 304 305 306 307 309 308 303 310 311 312 (Dwg. MHP2675) 96 Common s Drum (24 inch) * with Brake Band 382-32503-5L without Brake Band 382-32504-5L Drum (30 inch) * 382-32503-6L 382-32504-6L Drum (36 inch) * 1 382-32503-7L 382-32504-7L Drum (40 inch) * 382-32503-8L 382-32504-8L Drum (50 inch) * 382-32503-9L 382-32504-9L 300 Drum Locking Assembly 1 382-33103 141 Handle Grip 1 71436851 184 Outboard Upright * 1 382-33045-L 301 Handle 1 382-30639 302 Capscrew 1 71445654 303 Locknut 1 71069132 304 Shaft 1 382-33172 305 Capscrew 2 71467443 306 Washer 2 52914 307 Cover 1 33173 308 Housing 1 33143 309 Grease Fitting 1 71111942 310 Spring 1 71436869 311 Bushing 1 45871811 312 Drum Lock Pin 1 382-33168 313 Label, Drum Lock * 1 71465967 * not illustrated. 32 Form MHD56400 Edition 1
SERVICE NOTES Form MHD56400 Edition 1 33
PRESS ROLLER ASSEMBLY DRAWING 402 406 407 411 413 405 405 401 409 408 406 404 410 403 409 408 (Dwg. MHP2945) 34 Form MHD56400 Edition 1
400 401 403 411 Common s Press Roller Assembly (24 inch Drum) PRESS ROLLER ASSEMBLY PARTS LIST With Brake Band Without Brake Band 382-33457-5B 382-33457-5 Press Roller Assembly (30 inch Drum) 382-33457-6B 382-33457-6 Press Roller Assembly (36 inch Drum) 1 382-33457-7B 382-33457-7 Press Roller Assembly (40 inch Drum) 382-33457-8B 382-33457-8 Press Roller Assembly (50 inch Drum) 382-33457-9B 382-33457-9 Roller, End (24 inch Drum) 382-33440-5 Roller, End (30 inch Drum) 382-33440-6 Roller, End (36 inch Drum) 2 382-33440-7 Roller, End (40 inch Drum) 382-33440-8 Roller, End (50 inch Drum) 382-33440-9 Pivot Shaft (24 inch Drum) 382-33456-5B 382-33456-5 Pivot Shaft (30 inch Drum) 382-33456-6B 382-33456-6 Pivot Shaft (36 inch Drum) 1 382-33456-7B 382-33456-7 Pivot Shaft (40 inch Drum) 382-33456-8B 382-33456-8 Pivot Shaft (50 inch Drum) 382-33456-9B 382-33456-9 Shaft (24 inch Drum) 382-33454-5 Shaft (30 inch Drum) 382-33454-6 Shaft (36 inch Drum) 1 382-33454-7 Shaft (40 inch Drum) 382-33454-8 Shaft (50 inch Drum) 382-33454-9 402 Roller, Center 1 382-33439 404 Collar 2 71443980 405 Spring, Right 2 382-334421 406 Spring, Left 2 382-3344 407 Pivot Frame 1 382-33437 408 Capscrew 4 71371652 409 Washer 4 51009 410 Bushing 2 71443816 413 Pin, Retainer 2 382-30965 Form MHD56400 Edition 1 35
UNDERWIND REVERSING MANIFOLD (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST 265 266 248 268 949 95 949 267 266 248 268 949 269 (Dwg. MHP2939) 264 Reversing Manifold Assembly 1 28749 267 Manifold 1 W21007/89063 95 Capscrew 2 71106736 268 Capscrew 4 71262810 248 Gasket 2 K5B-547 269 Nut 2 43805258 265 Capscrew 4 71475073 949 Washer 8 71413355 266 Cover 2 W21008/89063 36 Form MHD56400 Edition 1
SERVICE NOTES Form MHD56400 Edition 1 37
DRUM GUARD ASSEMBLY DRAWING Automatic Band Brake 803 802 807 806 804 805 408 Manual Band Brake 801 810 306 408 (Dwg. MHP2946) 38 Form MHD56400 Edition 1
800 805 806 DRUM GUARD ASSEMBLY PARTS LIST 24 inch Drum 30 inch Drum 36 inch Drum 40 inch Drum 50 inch Drum Drum Guard Assembly 1 382-33102-5 382-33102-6 382-33102-7 382-33102-8 382-33102-9 Drum Guard Assembly Auto Band Brake Drum Guard Assembly Auto Band Brake & Drum Lock Drum Guard Assembly Manual Band Brake & Drum Lock Guard Panel without Band Brake 382-33102-5AB 382-33102-6AB 382-33102-7AB 382-33102-8AB 382-33102-9AB 382-33102-5ABL 382-33102-6ABL 382-33102-7ABL 382-33102-8ABL 382-33102-9ABL 382-33102-5BL 382-33102-6BL 382-33102-7BL 382-33102-8BL 382-33102-9BL 6 382-33110-5 382-33110-6 382-33110-7 382-33110-8 382-33110-9 Guard Panel with Band Brake 6 382-33110-5B 382-33110-6B 382-33110-7B 382-33110-8B 382-33110-9B Crossbar without Band Brake 9 382-33136-5 382-33136-6 382-33136-7 382-33136-8 382-33136-9 Crossbar with Band Brake 9 382-33136-5B 382-33136-6B 382-33136-7B 382-33136-8B 382-33136-9B 807 Guard Panel with Band Brake 1 382-33111-5 382-33111-6 382-33111-7 382-33111-8 382-33111-9 Table 5: Common s List 306 Washer 16 52914 804 Nut 18 71445415 408 Capscrew 16 71371652 810 Guard 2 382-33109 801 Guard (inboard end) 1 382-32995 811 Label (no drum guard) * 1 71449714 802 Guard (Auto Band Brake) 2 382-33107 812 Label (with drum guard) * 1 382-31662 803 Guard (outboard end) 1 382-32995-L * not illustrated. Form MHD56400 Edition 1 39
LABEL DRAWING AND PARTS LIST (Dwg. MHP2947) 185 Nameplate * 1 71070643 186 Rivet * 4 71028849 281 Label Kits Standard Winch * 382-33575 1 -E Winch * 382-33576 284 Force Five Product Label * 1 Contact Factory 285 Ingersoll-Rand Label * 1 71109102 286 Overwind Label * 2 71462725 Underwind * 2 71462733 287 Warning Label * 1 71060529 288 Warning Label * 1 71289326 289 Air Supply Label * 1 71046395 289 Exhaust Label * 2 71042196 291 Oil Supply Label * 3 71043616 294 Control Valve Operation * 1 96180102 * not illustrated. ACCESSORIES Lubricant LUBRI-LINK-GREEN 40 Form MHD56400 Edition 1
AIR PREPARATION ASSEMBLY DRAWING AND PARTS LIST (Dwg. MHP2679) 574 Air Preparation Assembly 1 382-31020 601 Regulator 1 R40-0B-G00 575 Filter 1 F35-0B-C28 602 Pipe Nipple 1 71057483 578 Pipe Nipple 2 71311426 603 U-Bolt 2 71445308 580 Lubricator 1 L40-0B-G00 604 Capscrew 4 71391080 586 Hose, Bulk 1 54737 605 Washer 4 71445324 589 Strainer (not shown) 1 K4U-A267AT 606 Nut 4 71445316 590 Liquidator (not shown) 1 8834-W1-000 607 Bracket 2 382-31021 591 Fitting (not shown) 1 54270 608 Fitting, Connector 1 71106520 592 Ball Valve (not shown) 1 71416911 609 Hose, Fitting 2 54738 Form MHD56400 Edition 1 41
CONSTRUCTION CAGE (OPTIONAL) ASSEMBLY DRAWING AND PARTS LIST 81 80 79 133 76 75 283 77 78 626 132 83 (Dwg. MHP2045) With Band Brake 75 Nut 12 50825 76 Label, Specifications 1 77 Nameplate 1 Contact Factory 78 Cover 1 27426 79 Construction Cage (24 inch (610 mm) Drum) CC-FA10-24M Without Band Brake CC-FA10-24X Construction Cage (30 inch (760 mm) Drum) CC-FA10-30M CC-FA10-30X Construction Cage (36 inch (915 mm) Drum) 1 CC-FA10-36M CC-FA10-36X Construction Cage (40 inch (1016 mm) Drum) CC-FA10-40M CC-FA10-40X Construction Cage (50 inch (1270 mm) Drum) CC-FA10-50M CC-FA10-50X 80 Lockwasher 12 71357735 81 Capscrew 12 52837 83 Warning Label 1 71359384 132 Capscrew 4 71359129 133 Nut 4 53390 283 Rivet 4 71028849 626 Washer 4 51831 42 Form MHD56400 Edition 1
Ingersoll Rand Company warrants to the original user its Hoists and Winches (Products) to be free of defects in material and workmanship for a period of one year from the date of purchase. Ingersoll Rand will repair, without cost, any Product found to be defective, including parts and labor charges, or at its option, will replace such Products or refund the purchase price less a reasonable allowance for depreciation, in exchange for the Product. Repairs or replacements are warranted for the remainder of the original warranty period. If any Product proves defective within its original one year warranty period, it should be returned to any Authorized Hoist and Winch Service Distributor, transportation prepaid with proof of purchase or warranty card. This warranty does not apply to Products which Ingersoll Rand has determined to have been misused or abused, improperly maintained by the user, or where the malfunction or defect can be attributed to the use of non-genuine Ingersoll Rand parts. It is our policy to promote safe delivery of all orders. This shipment has been thoroughly checked, packed and inspected before leaving our plant and receipt for it in good condition has been received from the carrier. Any loss or damage which occurs to this shipment while en route is not due to any action or conduct of the manufacturer. VISIBLE LOSS OR DAMAGE If any of the goods called for on the bill of lading or express receipt are damaged or the quantity is short, do not accept them until the freight or express agent makes an appropriate notation on your freight bill or express receipt. WARRANTY IMPORTANT NOTICE Ingersoll Rand makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set forth above. Ingersoll Rand maximum liability is limited to the purchase price of the Product and in no event shall Ingersoll Rand be liable for any consequential, indirect, incidental, or special damages of any nature rising from the sale or use of the Product, whether based on contract, tort, or otherwise. Note: Some states do not allow limitations on incidental or consequential damages or how long an implied warranty lasts so that the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. CONCEALED LOSS OR DAMAGE When a shipment has been delivered to you in apparent good condition, but upon opening the crate or container, loss or damage has taken place while in transit, notify the carrier s agent immediately. DAMAGE CLAIMS You must file claims for damage with the carrier. It is the transportation company s responsibility to reimburse you for repair or replacement of goods damaged in shipment. Claims for loss or damage in shipment must not be deducted from the Ingersoll Rand invoice, nor should payment of Ingersoll Rand invoice be withheld awaiting adjustment of such claims as the carrier guarantees safe delivery. You may return products damaged in shipment to us for repair, which services will be for your account and form your basis for claim against the carrier. Form MHD56400 Edition 1 43