Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be screwed on directly Cutting without electric power Easy to transport For threaded rods Part no. Sales unit Pack unit Threaded rod cutters M8 113681 1 pieces M10 113678 Cutter inserts M8 130216 M10 130214 Trapezoid-sheet pliers Punching plier for trapezoidal sheets of up to 1.25 mm thickness For screwing on trapezoidal sheet hangers Jaws open up to 100 mm The long handle enables easy punching of holes for subsequent fixing Exchangeable punching pliers increase the life cycle of the trapezoid-sheet plier Trapezoid-sheet pliers L Trapezoid-sheet pliers Type Jaw opening Part no. Sales unit Pack unit [mm] Trapezoid-sheet pliers from 78 to 10 130206 1 pieces Trapezoid-sheet pliers L from 100 to 10 130208 17/15
SUPPORT CHANNELS StaboFix Fixing system Carrying case includes complete set to be used on the construction site Practical basic assortment in the robust, handy metal carrying case Access to the items due to the well laid-out arrangement of the case StaboFix Pliers within the case No loose parts lying around on site Compact case size of 400 x 300 x 90 mm Also available as economy kit: the complete StaboFix Plumbers case plus 20 StaboFix sections StaboFix Plumbers case StaboFix Economy set The StaboFix Fixing system consists of: 1 StaboFix Pliers 10 StaboFix Retaining plates 10 StaboFix Clamps 30 StaboFix Bolts M8 short 30 StaboFix Bolts M8 long 100 StaboFix Drilling screws 4.2 x 16 100 StaboFix Drilling screws 4.8 x 19 50 Threaded pins M8 x 40 50 Threaded pins M8 x 60 100 Washers for M8 100 Hexagon nuts M8 Part no. Sales unit Pack unit StaboFix Plumbers case 129068 1 pieces StaboFix Economy set 1 StaboFix Plumbers case + 20 StaboFix sections 130587 set 4/86
SUPPORT CHANNELS StaboFix Fixing system Installation in a shaft: Pass-through mounting with two pipe clamps and a threaded pin M8 or M10 for the attachment of parallel pipelines Installation in a shaft: Pipe clamps are fitted in no time using the StaboFix M8 bolt Washbasin installation: Installation in tight wall recesses Washbasin installation: Everything fitted exactly to gauge Installation in a wall: Waste pipe of washing machine Wall-mounted installation: Wall-mounted installation using StaboFix with MPC-Support channels 4/87
Laser distance meter LD 320 TOOLS Ideal laser distance meter for indoor use Provided with all basic functions (length, area, volume, tracking permanent measure, Pythagoras with two meter points) High measurement accuracy, measure up to 40 m with laser precision Large figures and backlit display Calculates distance values within one second Different measure references on the frontside and backside of the housing Belt bag for comfortable transportation Robust structure with resistant box for challenging use on construction sites Simple, self-explanatory handling Secure and fast measuring on hard to reach locations Measuring accuracy at 10 m ± 2 mm Min. measuring distance 0.05 meter Max. measuring distance 40 meter Laser class 635 nm, Class 2 Measuring functions Single and permanent measurement Computational functions Length, area, volume, tracking (permanent measure), Pythagoras with two meter points Protection class IP 40 Life cycle of alkaline batteries Up to 3,000 measurements Dimensions (LxH) 100 x 54 x 30 mm 0.100 kg LD 320 Belt bag, alkaline batteries 142404 1 pieces 17/10
ProfiCut MWK 2500 For roughing, grinding and cutting of various materials High-power 2,500 watt motor for faster work progress Start-up current limiter for userfriendly switch-on Armoured motor winding keeps dust particles out and enables a long life cycle Rotating handle for optimal and fast adaptation to any application case Safety switch ensures maximum work safety Spindle arrest for fast grinding disc change guarantees a high level of operating convenience Flat and robust aluminium gearbox housing for working in confined spaces Switch-off carbon brush to protect the motor Service cover for easy carbon brush replacement Supplemental anti-vibration handle for vibration-damped work Power cord with 4 m rubber supply line Power consumption No-load speed Abrasive disc Ø Work spindle thread Disc receptacle bore 2,500 W 6,600 rpm 230 mm M14 22.2 mm 5.0 kg Angle grinder MWK 2500 Supplemental handle, pin spanner, professional carrying case 139072 1 pieces 17/5
Powerful cordless drill with compact design and low weight for mediumsize to large screw and bit diameters Drilling in wood up to 45 mm Drilling in steel up to Ø 13 mm Driving screws in wood up to Ø 12 mm Lithium-ion battery technology Battery weight reduced by up to 40 % compared to NiCd and NiMH devices, ensures fatiguefree work in continuous operation No memory effect. The battery can be charged at anytime without reducing the charging capacity No self-discharge if the battery is not used for an extended period; the battery is always ready for use Digital electronics with soft startup, overheating and overload protection as well as deep discharge protection ensure longer life cycle of battery and motor Fast charging time. After just 15 min. charging time the battery has reached 100 % of its capacity Environmentally friendly Li-ion cells without heacy-metal content Quick-change chuck system for fast chuck change with automatic spindle arrest Direct screwdriver bit receptacle in the spindle for driving screws without a chuck 2-speed epicyclic gearing Robust cast aluminium gearbox housing 21-stage torque adjustment for consistent screw-driving results Rotates in both directions High-intensity LED installed on the battery for optimal illumination of the work area Electronic switch for variable speed adjustment ProfiDrill MAS 1800 Quick stop for flush screwing LED battery capacity display Soft handle and rubberised electronics for secure hold and fatiguefree work Belt hook with integrated bit holder for simple transport of device and bits directly on the belt Battery No-load speed 1st gear No-load speed 2nd gear Width across corners Chuck capacity Drilling in wood to Ø Drilling in steel to Ø Driving screws in wood to Ø Max. torque (hard) Max. torque (soft) Charge time at 100% Machine weight with chuck Dimensions without chuck Dimensions with chuck 18 V / 4.2 Ah Li-Ion 0...360 rpm 0...1,500 rpm 30 mm 1.5 13 mm 45 mm 13 mm 12 mm 60 Nm 40 Nm 40 minutes 1.7 kg 2.0 kg 172 x 58 x 231 mm 224 x 58 x 231 mm Cordless drill/driver MAS 1800 Quick fit chuck Ø 13 mm, second battery pack, quick charger with cable compartment, belt hook with integrated bit holder, protective cap for gearbox, click box professional carrying case 139070 1 pieces Type Part no. Sales unit Pack unit Battery Li-Ion 139348 1 pieces Charger 18 V 139349 Quick fit chuck Ø 13 mm 139350 Angle converter 140345 17/7
ProfiHammer MHK 550 Drilling in concrete, brick and masonry, recommended drilling range up to Ø 12 mm Drilling in wood up to Ø 25 mm Drilling in steel up to Ø 13 mm Best power to weight ratio in the 500 watt hammer drill class Combination of maximum impact energy and dissipated torque at lowest weight High-power 550 watt motor with full ball-bearing support, guarantees high load capacity Low machine weight enables fatigue-free work, especially for working overhead Magnesium metal gearbox guarantees optimal impact capacity and a long life cycle Thermal contact protection for continuous heavy-duty use Optimised speed for minor drill abrasion Single button change-over from drilling to hammer drilling Impact stop for normal drilling and driving screws Brush change-over enables maximum torque in right-hand or left-hand rotation Control electronics for touch sensitive drilling Safety non-slip coupling protects the user SDS Plus tool receptacle with automatic closure Soft handle and rubberised switch element for fatigue-free work Power cord with quick lock and 4 m rubber supply line Power consumption No-load speed Rated speed Number of impacts Number of impacts at rated load Impact energy Recommended bore range Hammer drilling to Ø Drilling in concrete to Ø Drilling in steel to Ø Drilling in wood to Ø Collar of the hand drill Ø 550 W 0...1,450 rpm 900 rpm 5,790 rpm 4,010 rpm 1.7 J 4 12 mm 18 mm 13 mm 25 mm 43 mm 1.7 kg Hammer drill MHK 550 2-component soft handle, bit depth gauge, click box professional carrying case, 4 m power cord with quick lock 139076 1 pieces Power cord with quick lock, 4 m Power cord with quick lock, 6 m Part no. Sales unit Pack unit 139342 1 pieces 139343 17/1
ProfiHammer MHK 800 TOOLS Drilling in concrete, brick and masonry, recommended drilling range up to Ø 18 mm Drilling in wood up to Ø 40 mm Drilling in steel up to Ø 13 mm Facile chiselling work in concrete and masonry High-power 800 watt motor with integrated direction of rotation switch Angled design with spade grip for optimal handling and precise pressure point work Optimal motor and gearbox cooling for a long life cycle Rotates in both directions Control electronics for touch sensitive drilling Synchronised single-button change-over from drilling to chipping Rotation stop with spindle arrest for light chipping work Impact stop for normal drilling and driving screws Safety non-slip coupling protects the user SDS Plus tool receptacle with automatic closure Soft handle and rubberised switch element for fatigue-free work Power cord with quick lock and 4 m rubber supply line Power consumption No-load speed 1st gear Number of impacts Impact energy Recommended bore range Hammer drilling to Ø Drilling in concrete to Ø Drilling in steel to Ø Drilling in wood to Ø Collar of the hand drill Ø 800 W 0...1,000 rpm 4,900 rpm 3.2 J 18 mm 26 mm 13 mm 40 mm 43 mm 2.9 kg Hammer drill and chisel MHK 800 2-component soft handle, bit depth gauge, click box professional carrying case, 4 m power cord with quick lock 139081 1 pieces Power cord with quick lock, 4 m Power cord with quick lock, 6 m Part no. Sales unit Pack unit 139342 1 pieces 139343 17/2
Ratchet box For screw-mounting in industrial and handcraft sector 96-pieces ratchet box with highquality chrome-vanadium steel components Massive professional ratchet spanner enables tightening with the highest torques Ergonomic anti-slip hand grip for a secure hold Socket ejection at the touch of a button One-finger switchover between tightening and unscrewing Comprehensive accessory pack Robust and well laid-out plastic case Scope of supply ¼" Scope of supply ½" Scope of supply Bits (SW10) Scope of supply Bits (¼") 1 x Reversible ratchet 1 x Universal joint 1 x 100 mm extension with T-adapter 1 x Screwdriver with socket fitting 1 x Reversible ratchet 1 x Universal joint 1 x Clamping ring holder for bits SW 10 1 x 125 mm extension 1 x 250 mm extension with T-adapter 2 x Cross PZ 3 + PZ 4 2 x Cross PH 3 + PH 4 3 x Slot 8 12 2 x Cross PZ 1 + PZ 2 2 x Cross PH 1 + PH 2 1 x Slot 6.5 1 x Clamping ring holder for bits ¼" 8 x Socket SW 4 SW 9 8 x Long socket SW 6 SW 13 7 x Socket with Torx E 4 E 11 16 x Socket with hex SW 10 SW 32 5 x Long socket SW 14 SW 22 7 x Socket with Torx E 12 E 24 3 x Torx with internal hole T 50 T 60 2 x Sparking plug socket SW 16 + SW 21 2 x Hex 6 + 8 mm 2 x Torx with internal hole T 40 + T 45 2 x Hex 4 + 5 mm 6 x Torx T 10 T 30 6 x Torx with internal hole T 10 T 30 Scope of supply Part no. Sales unit Pack unit 96 pieces, carrying case 124505 1 pieces 17/17