Xxxx Xxxxxx RIDE MOTORCYCLE & MIRROR MOUNT Help Desk Guide RUN DRIVE LIFE
Anatomy of motorcycle dashboard Turn signal switch Hi/low beam headlight switch Triple clamp Speedometer Tachometer Handlebar riser Kill switch Hazard light switch The image on the left shows the approximate location and name of the various parts of a motorcycle dashboard. Every motorcycle (or scooter) will have a different layout but this is a rough guide to where things will likely be. Throttle Clutch lever Horn button Starter switch Front brake lever
Anatomy of the Countersunk screw Top cap Locking lever Locking lever spring Mount index base Motorcycle mount arm Cap head screw Motorcycle mount index base - male Motorcycle mount clamp Spacer - 28mm Spacer - 25mm Spacer - 22mm
Anatomy of the Countersunk screw Mount cap Locking lever Locking lever spring Mount index base - female Cap head screw index base - screw clamp Spacer - 14mm Spacer - 12mm Spacer - 10mm
Identifying the type of bike Naked bikes have a very varied handlebar setup across different models and brands The moto-mount or mirror mount is recommended depending on space constraints and personal preference. Scooters There are a huge range of motorcycles and scooters but they can generally be gathered into one of the categories shown on this page. fitment requirements: 25mm length bar space is recommend (Also known as Mopeds and Underbones) 60mm clearance required for to screw clamp together. Popular models: Vespa / Piaggio / Yamaha Mio fitment Requirements: Scooter/Moped/Underbones Check size of phone indented for mounting does not obstruct use of motorcycle or block vision Our recommended mount for each of these categories can be found on the following pages. However, because of the variety of bikes our suggestion might not be compatible with all bikes. For example, not all Tricycle/Quads have rear view mirrors. Naked Bikes Touring Bikes (also known as Standards or Roasters) Popular models: Triumph / Yamaha MT / Suzuki SV / KTM Duke Naked/Standard/Roadster Scooter usually have solid and no bar to secure a mount to. Touring Bikes Popular models: BMW K 1600 / Honda Gold Wing / Indian Roadmaster The is recommended for scooter mirrors provided the mirror bars are round. Touring bikes have a very varied handlebar setup across different models and brands fitment requirements: The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space constraints and personal preference. Check size of phone indented for mounting does not obstruct use of motorcycle or block vision fitment requirements: 25mm length bar space is recommend Off Road/Trail/DualNaked Sport/Enduro bikes have a very varied handlebar setup across different 60mm clearance required for to screw clamp together. Mirror Mount models and fitment brands requirements: Off Road/Trail/Dual Sport/Enduro Popular models: KTM 690 / HONDA XR / HUSQVARNA Tricycles/Quads Popular models: Kawasaki / Harley / Yamaha Wheeler Tricycle/Quad/3 Wheeler/4 The moto-mount or mirror mount is recommended depending on The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space constraints and personal preference. fitment requirements: 25mm length bar space is recommend fitment requirements: 25mm length bar space is recommend 60mm clearance required for to screw clamp together. 60mm clearance required for to screw clamp together. Check sizeconstraints of phone indented for mounting does not obstruct use of space and personal preference. motorcycle or block vision Cruiser/Chopper fitment Requirements: Most Off road/trail/dual Sport/Enduro bikes have cross bars and usually have round indented bar mirrors Check size of phone for mounting does not obstruct use of Popular models: Harley Davidson / Triumph Rocket / Kawasaki VN2000 Cruiser/Chopper (Also known as Trikes, 3 Wheelers/4-Wheelers) Touring bikes have a very varied handlebar setup across different models and brands motorcycle or block vision The moto-mount or mirror mount is recommended depending on space constraints and personal preference. fitment requirements: 25mm length bar space is recommend 60mm clearance required for to screw clamp together. fitment requirements: Most Cruiser and Chopper bikes have lot s of space on the handle Check of phone formirrors mounting does not obstruct use of bars andsize usually haveindented round bar motorcycle or block vision The moto-mount or mirror mount is recommended depending on Sport Bikes fitment requirements: Tricycle Quad Bikes for canmounting come in various such Check size ofand phone indented does notstyles obstruct useasofcruis- motorcycle or block vision er/offroad/scooter/chopper/sport therefore having varying bar and Sports Bikes Popular models: Kawasaki Ninja / Suzuki Hayabusa mirror / Ducati Yamaha YZF set/ups. The moto-mount or mirror mount is recommended depending on space constraints and personal preference. fitment requirements: 25mm length bar space is recommend 60mm clearance required for to screw clamp together. fitment requirements: Sport bikes have a very busy and condensed handle bar Check size of phone indented for mounting does not obstruct use of setup. motorcycle or block vision
Naked/Standard/Roadster 60mm 25mm Naked/Standard/Roadster bikes have a very varied handlebar setup across different models and brands. This kind of bike can often fit both the or the. Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm) (shown with and without mounting arm)
Off Road/Trail/Dual Sport/Enduro Most of this kind of bike have cross bars and usually have round mirror stems. This kind of bike can often fit both the or the. 60mm 25mm Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm) (shown with and without mounting arm)
Cruiser/Chopper 25mm 60mm Most Cruisers and Chopper bikes have lots of space on the handle bar and usually have round mirror stems. This kind of bike can often fit both the or the. Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm) (shown with and without mounting arm)
Scooter/Moped/Underbones Scooters usually have a solid dashboard and no handlebar to secure a mount to. The is recommended for this type of bike, as long as the mirror stems are round. Whilst the mount might attach to other shapes of mirror stem we can t guarantee a secure fit on anything other than a round stem. Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm)
Tricycle/Quad/3 Wheeler/4 Wheeler 60mm 25mm Trikes and Quad bikes can come in various styles such as Cruiser/Off Road/ Scooter/Chopper/Sport and therefore have a varying bar and mirror set ups. This kind of bike can often fit both the or the. Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm) (shown with and without mounting arm)
Touring Bikes 60mm 25mm Touring bikes have a very varied handlebar set up across different models and brands. or is recommended depending on space constraints and personal preference. The can even fit on some cross bars, if present. Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) Fits round mirror stems 3/8 (10mm), 1/2 (12mm), and 9/16 (14mm) (shown with and without mounting arm)
Sport Bike Sports bikes generally have very busy and condensed handlebar set up. We recommend the but it is unlikely to fit most Sports bikes. 25mm 60mm Fits round handle bars 7/8 (22mm), 1 (25mm), 1-1/8 (28mm) and 1-1/4 (32mm) (shown with and without mounting arm)