Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce to shock nd virtions EIL580 with squre flnge Technicl dt - electricl rtings Voltge supply 5 VDC ±5 % 8...30 VDC 4.75...30 VDC Reverse polrity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, mx. 1 s nd 1 signl) Consumption w/o lod 70 m Pulses per revolution 100...5000 Phse shift 90 ±10 Scn rtio 40...60 % Reference signl Zero pulse, width 90 ±10 % Sensing method Opticl Output frequency 300 khz (TTL) 160 khz (HTL) Output signls +, B+, R+, -, B-, R- Output stges TTL/RS422 HTL/push-pull Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-3 pprovl UL 508 / CS 22.2 Technicl dt - mechnicl design Size (flnge) Shft type dmitted shft lod Flnge Protection DIN EN 60529 2.5 x 2.5" (63.5 x 63.5 mm) ø10 x 20 mm, solid shft with flt ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shft with flt 40 N xil 80 N rdil Squre flnge 2.5" (63.5 mm) IP 65 (without shft sel), IP 67 (with shft sel) Operting speed 6000 rpm (+20 C, IP 67) 12000 rpm (+20 C, IP 65) Strting torque 0.0 Nm (+20 C, IP 65) 0.02 Nm (+20 C, IP 67) Mterils Housing: luminium die-cst Flnge: luminium Solid shft: stinless steel Operting temperture -40...+85 C Reltive humidity 90 % non-condensing Resistnce DIN EN 60068-2-6 Virtion 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Connection Flnge connector M12, 8-pin Flnge Cle Weight pprox. 370 g Suject to modifiction in technic nd design. Errors nd omissions excepted. 1 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Prt numer Squre flnge EIL580-S Q... Pulse numer - see tle E H N Q Voltge supply / output stges 5 VDC, TTL/RS422, 6 chnnel 8...30 VDC, TTL/RS422, 6 chnnel 8...30 VDC, HTL/push-pull, 6 chnnel 4.75...30 VDC, HTL/push-pull, 6 chnnel R L F B T U D P Q Connection Cle rdil, 1 m Cle rdil, 2 m Flnge, rdil, mle, ccw Flnge connector M12, 8-pin, rdil, mle, ccw Cle xil, 1 m Cle xil, 2 m Flnge, xil, mle, ccw Flnge connector M12, 8-pin, xil, mle, ccw Cle tngentil, 1 m Cle tngentil, 2 m Protection 5 IP 65 7 IP 67 Specifiction solid shft U3 ø3/8 x 4/5 (ø9.525 x 20.32 mm), with flt 10 ø10 x 20 mm, with flt Q Pulse numer Flnge Squre flnge 100 300 720 1250 2500 120 360 800 1440 3000 0 400 900 00 3600 200 500 1000 1800 4000 250 512 1024 2000 4096 256 600 1200 2048 5000 Suject to modifiction in technic nd design. Errors nd omissions excepted. 2 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse ccessories Connectors nd cles 10127844 Connection cle 2 m shielded with femle connector M12, 8-pin, stright (ESG 34FH0200G) 10129332 Connection cle 5 m shielded with femle connector M12, 8-pin, stright (ESG 34FH0500G) 10129333 Connection cle 10 m shielded with femle connector M12, 8-pin, stright (ESG 34FH1000G) 11053961 Connection cle 2 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH0200G) 11053962 Connection cle 5 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH0500G) 10170054 Connection cle 10 m shielded with femle connector M12, 8-pin, ngled (ESW 33FH1000G) 10164705 Connector M23, 12-pin 11095302 Connection cle 1 m shielded with femle 11100408 Connection cle 2 m shielded with femle 11100430 Connection cle 5 m shielded with femle 11100431 Connection cle 10 m shielded with femle Mounting ccessories 110659 Coupling CPS25 L=19 d1=04/d2=10 11065918 Coupling CPS25 L=19 d1=07/d2=10 11065920 Coupling CPS25 L=19 d1=08/d2=10 11065921 Coupling CPS25 L=19 d1=09/d2=10 11065922 Coupling CPS25 L=19 d1=10/d2=06 11065923 Coupling CPS25 L=19 d1=10/d2=10 11065924 Coupling CPS25 L=19 d1=10/d2=11 11065925 Coupling CPS25 L=19 d1=10/d2=12 10141132 Spring wsher coupling D1=6 / D2=10 (Z 121. C01) 10141133 Spring wsher coupling D1=10 / D2=10 (Z 121.C03) 11034138 Spring wsher coupling D1=10 / D2=16 (Z 121.C04) 11034140 Spring wsher coupling D1=10 / D2=14 (Z 121.C06) 11034141 Spring wsher coupling D1=10 / D2=12 (Z 121.C07) 11050507 Bellows coupling luminium/stinless steel D1=06 / D2=10 11101781 Doule loops coupling D1=10 / D2=10 Suject to modifiction in technic nd design. Errors nd omissions excepted. 3 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Output signls Trigger level Outputs TTL/RS422 Output level High 2.5 V Output level Low 0.5 V Lod 20 m Terminl ssignment Flnge / cle Pin Core color ssignment 1 pink B- 2 3 lue R+ 4 red R- 5 green + 6 yellow - 7 8 grey B+ 9 10 white GND 11 12 rown UB Screen: Connected to housing Cle dt: PVC, [4x2x0.14 mm 2 ], ending rdius >32.5 mm, outer dimeter 6.5 mm 2 3 10 4 1 9 11 8 12 5 7 6 Outputs Output level High Output level Low Lod HTL/Push-pull UB -3 V 1.5 V 20 m Flnge connector M12, 8-pin Pin ssignment 1 GND 2 UB 3 + 4-5 B+ 6 B- 7 R+ 8 R- 7 6 1 2 8 5 3 4 Suject to modifiction in technic nd design. Errors nd omissions excepted. 4 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Dimensions Squre flnge, flnge connector M23, rdil ø0.03 55.5 14.4 M23x1 Squre flnge, flnge connector M12, rdil ø0.03 51.4 Squre flnge, cle rdil ø0.03 7.62 (6.48) 11.8 M12x1 53 11.8 Suject to modifiction in technic nd design. Errors nd omissions excepted. 5 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Dimensions Squre flnge, flnge connector M23, xil 26 8.5 ø0.03 M23x1 Squre flnge, flnge connector M12, xil 22 ~11 ø0.03 M12x1 Squre flnge, cle xil ø0.03 ~23 ~11 Suject to modifiction in technic nd design. Errors nd omissions excepted. 6 www.umer.com/motion
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Dimensions Squre flnge, cle tngentil ø9.525 ø10 8.64 9. 20.32 20 34.4 128 Suject to modifiction in technic nd design. Errors nd omissions excepted. ø0.03 19.5 7 www.umer.com/motion