TransportTransportundund Hebegeräte Hebegeräte Chain slings HIT PRO chain system grade 1... 152 HIT PRO grade 1 Advantages... 153 HIT PRO grade 1 Nominal ratings at one glance... 155 Chain slings HIT PRO grade 1... 15 Chain components HIT PRO grade 1... 4 Chain slings HIT grade 0... Load distributor... 19 Chain components... 10 Chain slings, 1-/2-/4-leg, Grade 0... Further accessories for lifting slings... 1 Galvanised round steel chains according to DIN, DIN 3 and 55... 1 Experienced and orientated on quality Take advantage of our experience and quality arosen from our 25-year partnership with pewag austria. Benefit from the advantages of this strong connection. Flexible and efficient We offer you a vast and effective prograe of chain slings in grade 0 HIT (or special grade 0) up to 2 and grade 1 HIT PRO, satisfying the challenging requirements of your daily attachment operations. Innovative Innovations arise from the work, the thoughts and the ideas of experienced specialists. Let us convince you of the performance of our innovations as for example of the profile chain slings of the grade 1 or the chain super corrosion protection PFEIFER XLL (extremely Long Life.) 151
HIT PRO chain system grade 1 HIT PRO The new grade 1 from PFEIFER Light, economical and ergonomic Try out the new innovative grade 1 HIT PRO chain. Reduction of a whole chain diameter compared to grade 0 reduces the weight of the chain by up to %. Take advantage of this reduction, especially when chains need to be changed frequently or heavy multi-leg or long suspension gears have to be moved. Innovative and durable The HIT PRO chain cross-section is not round but has the shape of a D. This intelligent redistribution has an excellent effect on the flexural rigidity and fatigue strength of the material and makes HIT PRO exceptionally resistant and durable in daily use. The tried and tested PFEIFER XLL top coating ensures perfect corrosion prevention with excellent abrasion strength. The chain is very easy to test due to its thin coating, providing a high degree of safety. HIT PRO innovative chain system GK 12 according to PAS 1 Tested and approved by the German BG with D stamp of approval Approved Like all chain slings and lashing chains from PFEIFER, the HIT PRO is also approved by the BG with the corresponding stamp on the chain system. Intelligent profile Optimised flexural rigidity Very high working load limit Very high lashing force Perfect power to weight ratio Significant saving in weight Longer tool life EXtremely convincing reasons! Additional value with the new super corrosion prevention from Pfeifer XLL (extremely Long Life) TOP corrosion resistance in salt spray testing acc. to DIN 50021. = greater durability than previously, even in comparison with powdercoated chains! TOP adhesive strength as specified in cross-cut test ISO 29, DIN 53 151, ASTM 3002, ASTD 3359 (abrasion resistance of coating, impact strength etc. ) = no problem of abrasion or flaking (as with powder coating) resulting in troublesome paint particles e.g. on machines! TOP suitability for electromagnetic crack detection ("fluxing") due to thin coating layer = greater safety than painted or powder-coated chains. TOP ease of identifying the grade stamps W or due to thin coating 152
HIT PRO grade 1 Advantages Advantages in load securing and attachment technology with the new innovative chain system Chain slings Intelligent profile by the intelligent use of material, essential characteristics of the chain (e. g. fatigue strength and flexural rigidity) are substantially improved compared to a normal round steel chain with the same cross section. In order to achieve the optimum technical effect, the use of the material was optimised (blue surfaces) at effective points, but reduced (red surfaces) in less relevant areas. Patented material with optimised strength and endurance characteristics at both high and at low temperatures. Optimised flexural rigidity the section modulus, which is important to prevent undesirable deflection, is up to % higher in the profile chain than in a round link chain with the same cross section and hence reduces the maximum tension in the chain (no red areas). Longer service life due to higher strength and lower wear. Complete traceability chains and components are provided with identity stamps; these allow the entire manufacturing process to be verified. The professional in demanding use thanks to the combination of intelligent profile, patented high performance chain steel and an optimised tempering process, HIT PRO attains maximum strength, hardness and flexural rigidity. Particularly in tough use on edges, the revolutionary HIT PRO technology proves its capabilities with a ruggedness that has never been known before! The low temperature professional due to the extremely high temperature stability from 0 to +300 C, HIT PRO is suitable even for the harshest environmental conditions in the world. Simple visual identification due to profiled chain and grade 1 stamp on each chain link Super PFEIFFER XLL corrosion protection (extremely Long Life) Quality-assured European production by ISO 9001 certified company 153
50 % higher working load limit compared to grade 0 % higher working load limit compared to grade 0 Nominal chain thickness working load limit HIT grade 0 grade 0 HIT PRO grade 1 230 () 11 () 000 00 Higher working load limit Reduction of the chain dimension Reduction to a smaller chain dimension in many load areas compared to grade 0 or grade 0 chain systems results in maximum efficiency in handling and performance 0 saving Significant weight saving of up to % compared to grade 0 chains with the same working load limit, hence considerably simpler handling HIT PRO saves costs and weight in attachment technology due to higher 154 working load limits. Example: 2-leg suspension grade 0 compared to HIT PRO up to 45 angle of inclination previous chain dia. working load limit HIT PRO chain grade 0
HIT PRO grade 1 Nominal ratings at one glance Chain quality modifications (higher mechanical values and impact values, reduced operating temperature) Stress at rated carrying load 300 N/ 2 Stress at rated lashing load 00 N/2 Fatigue test,000 load changes at 2 450 N/ nominal stress Nominal test stress 50 N/ Nominal breaking stress 1 0 N/2 2 Elongation at breaking point min. % irrespective of the surface Deflection 0. d 42 J at 0 C Manufacturer s name/mark pewag/d Stress corrosion Operating temperature Grade stamp Surface Chain slings Notched bar impact work PAS 1 reduction in working load limit at higher temperatures) Chain: Stamp 1 at 300 intervals; stamp 12 on the back of every link Components: Stamp 12 on each component (extremely Long Life) XLL Working load limit identification tag Data of importance to the user are given on Lashing identification tag Compatibility Data of importance to the user are given on the lashing identification tag. A specially shaped tag was developed for easy and accurate identification. are only partly compatible with chains and components of other quality grades and from other manufacturers. Combinations must be checked in advance by the manufacturer. 155
Working load limit table: Comparison of grade 0 HIT grade 0 HIT PRO grade 1 The specified working load limits are maximum values for the different types of lifting. Safety factor 1 leg chains 3-+4 leg chains 2 leg chains Endless chain slings 4 Angle of inclination up to up to 45 45 0 up to 45 45 0 up to 45 45 0 up to 45 Load factor 1 0. 2 1.4 1 1.12 0. 2.1 1.5 1. 1.4 Code d/ [] HIT PRO 230 00 4 3350 230 250 00 3550 350 3350 HIT 00 1500 300 250 00 21 1500 0 250 grade 0 1500 10 21 1500 100 10 21 HIT PRO 230 000 3350 230 300 4500 450 HIT 3550 0 350 3550 grade 0 00 0 00 0 HIT PRO 000 0 500 00 500 000 0 HIT 000 500 000 000 300 500 grade 0 300 3550 00 450 HIT PRO 000 300 000 000 9000 300 1000 1100 1 HIT 00 0 9500 00 500 1 000 00 9500 grade 0 00 500 5900 000 500 500 If the chains are subjected to additional strains (e.g. high temperatures, asyetry, edge loading, impacts) then the maximum working load limits in the table above must be reduced. The load factors below should be used for these situations. Additional strain Thermal stress HIT PRO load factor Asyetrical load distribution Edge loading 0 C 0 C 1 C 300 C more than 300 C 1 0. prohibited The working load limit must be reduced by at least 1 chain leg. In cases of doubt assume that only 1 leg is carrying. R = greater than 2 d R = greater than d R = smaller than d d = chain material thickness Load factor Impact stress 15 Load factor 1 0. 0.5 minor impacts medium impacts major impacts 1 0. not permitted
Chain slings HIT PRO grade 1 1-/2-/4-leg Chain sling, 1-leg with sling hook HSWP 5 Grade 1 230 00 230 0 95 92 000 300 0 1 92 1 0 1 0 925 924 Chain sling, 1-leg with safety hook LHWP Grade 1 1 0 230 00 230 1 0 929 0 95 9290 000 300 0 1 9291 92 EXtremely convincing reasons! Additional value with the new super corrosion prevention from Pfeifer XLL (extremely Long Life) TOP corrosion resistance in salt spray testing acc. to DIN 50021. = greater durability than previously, even in comparison with powdercoated chains! TOP adhesive strength as specified in cross-cut test ISO 29, DIN 53 151, ASTM 3002, ASTD 3359 (abrasion resistance of coating, impact strength etc. ) = no problem of abrasion or flaking (as with powder coating) resulting in troublesome paint particles e. g. on machines! TOP suitability for electromagnetic crack detection ("fluxing") due to thin coating layer = greater safety than painted or powder-coated chains. TOP ease of identifying the grade stamps W or due to thin coating Chain slings 15
Chain sling, 1-leg, adjustable with sling hook HSWP 5/ Grade 1 1 0 9300 230 00 230 1 0 9301 0 95 9302 000 300 0 1 9303 A contribution to safety: We identify our chain slings (in the case of delivery and BGR 500 test) with a tag showing the due date of the next test so that you do not miss any of these legally prescribed dates. Further information on our inspection service is given on pages 9. Chain sling, 1-leg, adjustable with safety hook LHWP Grade 1 1 0 230 00 230 1 0 9305 0 95 930 000 300 0 1 930 15 9304
Endless chain sling with connecting link CWP 5 Grade 1 350 9309 450 9312 000 93 1 9314 Endless chain sling with master link VMWP 5 Grade 1 3350 0 1 0 1 93 0 0 0 9321 230 150 93 93 EXtremely convincing reasons! Additional value with the new super corrosion prevention from Pfeifer XLL (extremely Long Life) TOP corrosion resistance in salt spray testing acc. to DIN 50021. = greater durability than previously, even in comparison with powdercoated chains! TOP adhesive strength as specified in cross-cut test ISO 29, DIN 53 151, ASTM 3002, ASTD 3359 (abrasion resistance of coating, impact strength etc. ) = no problem of abrasion or flaking (as with powder coating) resulting in troublesome paint particles e. g. on machines! TOP suitability for electromagnetic crack detection ("fluxing") due to thin coating layer = greater safety than painted or powder-coated chains. TOP ease of identifying the grade stamps W or due to thin coating Chain slings 159
Chain sling, 2-leg with sling hook HSWP 5 Grade 1 0 45 45 0 0 45 45 0 3350 230 250 00 0 95 9331 3350 230 0 95 9332 0 500 0 1 9333 000 9000 300 230 0 9334 Chain sling, 2-leg with safety hook LHWP Grade 1 0 45 45 0 0 45 45 0 3350 230 250 00 0 95 9335 3350 230 0 95 933 0 500 0 1 933 000 9000 300 230 0 933 0
Chain sling, 2-leg, adjustable with sling hook HSWP 5/ Grade 1 0 45 45 0 0 45 45 0 3350 230 250 00 0 95 934 3350 230 0 95 934 0 500 0 1 9349 000 9000 300 230 0 9350 Chain sling, 2-leg, adjustable with safety hook LHWP Grade 1 0 45 45 0 0 45 45 0 0 95 9351 3350 230 250 00 3350 230 0 95 9352 0 500 0 1 9353 000 9000 300 230 0 9354 EXtremely convincing reasons! Additional value with the new super corrosion prevention from Pfeifer XLL (extremely Long Life) TOP corrosion resistance in salt spray testing acc. to DIN 50021. = greater durability than previously, even in comparison with powdercoated chains! TOP adhesive strength as specified in cross-cut test ISO 29, DIN 53 151, ASTM 3002, ASTD 3359 (abrasion resistance of coating, impact strength etc. ) = no problem of abrasion or flaking (as with powder coating) resulting in troublesome paint particles e. g. on machines! TOP suitability for electromagnetic crack detection ("fluxing") due to thin coating layer = greater safety than painted or powder-coated chains. TOP ease of identifying the grade stamps W or due to thin coating Chain slings 1
Chain sling, 4-leg with sling hook HSWP 5 Grade 1 0 45 45 0 3550 0 1 9355 300 4500 0 1 935 00 500 230 0 935 1000 1100 25 150 935 The specification of the working load limit for 4-leg suspension gears applies only in the case of syetrical loading of all legs. In the case of asyetrical load distribution, only two load-bearing legs may be counted in accordance with BGR 500, chapter 2./3.5.3. A contribution to safety: We identify our chain slings (in the case of delivery and BGR 500 test) with a tag showing the due date of the next test so that you do not miss any of these legally prescribed dates. Further information on our inspection service is given on pages 9. Chain sling, 4-leg with safety hook LHWP Grade 1 0 45 45 0 3550 0 1 9359 300 4500 0 1 930 00 500 230 0 931 1000 1100 25 150 932 The specification of the working load limit for 4-leg suspension gears applies only in the case of syetrical loading of all legs. In the case of asyetrical load distribution, only two load-bearing legs may be counted in accordance with BGR 500, chapter 2./3.5.3. 2
Chain sling, 4-leg, adjustable with sling hook HSWP 5/ Grade 1 0 45 45 0 3550 0 1 933 300 4500 0 1 934 00 500 230 0 935 1000 1100 25 150 93 The specification of the working load limit for 4-leg suspension gears applies only in the case of syetrical loading of all legs. In the case of asyetrical load distribution, only two load-bearing legs may be counted in accordance with BGR 500, chapter 2./3.5.3. Chain sling, 4-leg, adjustable with safety hook LHWP Grade 1 0 45 45 0 3550 0 1 93 300 4500 0 1 93 00 500 230 0 939 1000 1100 25 150 930 The specification of the working load limit for 4-leg suspension gears applies only in the case of syetrical loading of all legs. In the case of asyetrical load distribution, only two load-bearing legs may be counted in accordance with BGR 500, chapter 2./3.5.3. EXtremely convincing reasons! Additional value with the new super corrosion prevention from Pfeifer XLL (extremely Long Life) TOP corrosion resistance in salt spray testing acc. to DIN 50021. = greater durability than previously, even in comparison with powdercoated chains! TOP adhesive strength as specified in cross-cut test ISO 29, DIN 53 151, ASTM 3002, ASTD 3359 (abrasion resistance of coating, impact strength etc. ) = no problem of abrasion or flaking (as with powder coating) resulting in troublesome paint particles e. g. on machines! TOP suitability for electromagnetic crack detection ("fluxing") due to thin coating layer = greater safety than painted or powder-coated chains. TOP ease of identifying the grade stamps W or due to thin coating Chain slings 3
Chain components HIT PRO grade 1 Profile chain HIT PRO Grade 1 Grade 1 to PAS 1 (with modifications) with PFEIFER XLL coating /m 230 Dimensions in dm p W1 min. W2 max. 1.2 2 91 1.4 25 11 29 9121 2. 33 14 3 91 000 4.59 41 50 9123 Master link, 1-leg chain sling Grade 1 Can also be used as an end link for looping around a load. Dimensions in 1-leg NW 0 45 For crane hooks DIN 151 D T W 230 up to 4 0.44 14 1 0 94 30 up to 5 0. 1 1 0 94 up to 1.21 0 95 949 0 up to 2.5 2 0 1 950 The working load limit specification refers to the maximum working load limit of the component. Please refer to the working load limit table for the working load limits of chain suspension gear. 4
VMWP master link for 2-, 3- and 4-leg chain sling Grade 1 2-leg 3- and 4-leg NW 0 45 For crane hooks DIN 151 C D T W E Dimensions in up to 1.55 54 0 95 214 951 up to 1.55 54 0 95 214 2432 00 up to 3.3 0 2 0 1 2432 00 up to 3.3 0 2 0 1 952 12300 up to 12.00 5 33 230 0 315 953 210 up to 25 11.12 1 3 25 150 415 954 The working load limit specification refers to the maximum working load limit of the component. Please refer to the working load limit table for the working load limits of chain suspension gears. Connecting link CWP Grade 1 For connecting the chain to master links and other accessories Dimensions in B C D E G S 230 0.12 4 11 9 51 14 955 0.2 5 12 11 5 21 95 0.33 0 95 000 0.0 4 21 1 95 2 24 95 Mounting Eye sling hook HSWP Chain slings Grade 1 Standard sling hook with replaceable, forged safety latch. Dimensions in A A D1 D2 E G1 H 0.5 25 11 2 2 2432 0.5 25 11 2 2 959 1.1 2 2 34 1 31 33 90 000 2.2 33 33 43 4 39 43 91 5
Safety hook LHWP Grade 1 Closes and locks automatically upon raising the load. With lock release on the back of the hook. Dimensions in A A D1 D2 E G1 H 0.9 24 24 25 14 12 34 25 24329 0.9 24 24 25 14 12 34 25 92 1. 2 2 31 1 15 45 31 93 000 3.3 34 34 5 54 41 94 Grab hook PWP Grade 1 For shortening and for loops that must not tighten themselves. It can be used as a chain shortener with full working load limit due to its special shape. Dimensions in B D1 E 0.4 3 1 243290 0.4 3 1 95 1.03 1 9 000 2. 3 2 1 9 Grab hook with safety latch PSWP Grade 1 Shortening hook with safety latch to prevent unintentional unhooking of the chain. It can be used as a chain shortener with full working load limit due to its special shape. Dimensions in B D1 E 0.4 3 1 243291 0.4 3 1 9 1.03 1 99 000 2. 3 2 1 90 Safety latch for eye sling hook Type HSWP Grade 1 Forged safety latch with spiral pin and spring. For simple replacement in the case of damage or wear. 0.05 0.05 0.05 0.05 243292 95 9 9
Safety latch for safety hook Type LHWP Grade 1 243293 9 99 90 For simple replacement in the case of damage or wear. Bolt set for connecting link Type CWP Grade 1 91 92 93 94 Spare part for connecting link, grade 1 incl. safety socket Safety latch for grab hook, complete Type PSWP Grade 1 243294 91 92 93 For simple replacement in the case of damage or wear. Quality inspection tag Complete with mounting ring 94 Chain slings Quality tag for chain slings, 1 or more legs, grade 1 1414 A contribution to safety. We identify our chain slings (in the case of delivery and BGR 500 test) with a tag showing the due date of the next test, so that you do not miss any of these legally prescribed dates. Mounting ring for quality tags and quality inspection tags 9
Chain slings HIT grade 0 General information and working load limits Nominal thickness grade 0 acc. to PAS 1 Quality tag according to EN 1 Min. 25 % greater working load limit than grade 0 enables change to smaller chain dimensions cost saving weight saving Longer lifetime Components: Chain: Chains and components Identification mark Working load limit table for PFEIFER chain slings Nominal chain thickness up to up to 45 up to 45 45 0 up to 45 45 0 up to 45 45 0 up to 45 45 0 4.00 2.0 1. 1.12 2.0 2.00 2.24 2.00 1. 1.0 1.12 3.00 2.12 2.50 2.00 5.00 3.55 4.00 3.55 2.50 2.0 2.00 5.30 3.5. 5.00 4.00 3.15.00 5.0.30 5.0 4.00 4.25 3.15.00.00 11..00.0 5.30. 9.50.0 9.50.0.50 5.30 14.00.00.00..00.00.00 14.00.00 14.00.00 11..00 21. 15.00 2.00.00 14;00 11. 2.00.00..00 14.00.00 11. 30.00 21..00 2.00 ;00 15.00 3.50 2.50 30.00 2.50.00 21. 15.00.00 2.00 53.00 3.50 The working load limit data (in tonnes) correspond to the use of the chain slings under normal conditions (syetrical loading of all legs). If the load is distributed asyetrically: only one leg may be assumed to be bearing the load in the case of 2-leg suspension gears (see single-leg suspension gear) two load-bearing legs may be counted in the case of 3/4-leg suspension gears according to BGR 500, chapters 2./3.5.3 (see 2-leg suspension gear). When using 2 suspensions devices on one crane hook, the angle of inclination of the attachment devices may not exceed 45. Additional factors which reduce working load limit such as sharp edges etc. must be taken into account in accordance with the regulations in EN 1. Inspection: The test specifications applicable in each country must be complied with. Application temperature range: Chain slings grade 0 HIT in accordance with PAS 1: 0 % working load limit between C and +0 C The criteria for discarding time for chains are also specified in EN 1.
Chain sling, 1-leg with clevis sling hook 13 Grade 0 1 0 4 11 1 0 5 5 5 00 0 90 000 000 10 0 1 1 231 000 1 300 0 0 Chain sling, 1-leg with clevis safety hook 13 Grade 0 Hook closes and locks automatically upon raising the load. 1 0 11 011 1 0 012 5 5 0 00 0 90 014 000 000 10 0 015 1 1 23115 000 1 300 0 01 Chain sling, 1-leg, adjustable with clevis sling hook 13/12 Grade 0 Chain slings 1 0 11 01 1 0 0 5 5 0 00 0 90 021 000 000 10 0 0 1 1 2311 000 1 300 0 024 9
Chain sling, 1-leg, adjustable with clevis safety hook Grade 0 Hook closes and locks automatically upon raising the load. 13/12 1 0 02 11 1 0 02 5 5 02 00 0 90 029 000 000 10 0 030 1 1 2311 000 1 300 0 032 Chain sling, 1-leg with oversized master link and clevis sling hook 13 Grade 0 Specially for large crane hooks 3 10 2310 00 3 10 2311 000 000 3 10 2312 1 3 10 2313 000 1 3 10 2314 10 3 10 239
Chain sling, 1-leg, adjustable with oversized master link and clevis sling hook Grade 0 Specially for large crane hooks 13 3 10 2315 11 3 10 231 3 10 231 00 3 10 231 000 000 3 10 2319 Chain sling, 1-leg with connecting link 12 Grade 0 For connecting the chain to master links and other accessories 1 0 231 11 1 0 23123 5 5 23124 00 0 90 23125 000 000 10 0 2312 1 1 2312 000 1 300 0 2312 Chain slings 11
Endless chain sling with connecting link 12 Grade 0 Caution: Connecting link may be only loaded axially. 3 4 300 5 00 000 0 231 0 9 Endless chain sling with master link 11 Grade 0 1 0 3550 5 5 111 500 0 90 112 12 1 9500 10 0 1 1 0 1 114 0 1 23121 3 10 1
Chain sling, 2-leg with clevis sling hook 13 Grade 0 0 45 45 0 0 45 45 0 00 11 1 0 033 3550 0 5 5 034 500 0 90 035 9500 00 500 10 0 03 1 000 000 0 1 03 0 1 000 300 0 235 000 210 1 3 10 039 Chain sling, 2-leg with clevis safety hook 13 Grade 0 Hook closes and locks automatically upon raising the load. 0 45 45 0 0 45 45 0 00 11 1 0 0 3550 0 5 5 041 500 0 90 042 9500 00 500 10 0 043 1 000 000 0 1 044 0 1 000 300 0 235 000 210 1 3 10 04 Chain slings 13
Chain sling, 2-leg, adjustable with clevis sling hook 13/12 Grade 0 0 45 45 0 0 45 45 0 00 11 1 0 04 3550 0 5 5 04 500 0 90 049 9500 00 500 10 0 050 1 000 000 0 1 051 0 1 000 300 0 2359 000 210 1 3 10 053 Chain sling, 2-leg, adjustable with clevis safety hook Grade 0 Hook closes and locks automatically upon raising the load. 13/12 0 45 45 0 0 45 45 0 00 11 1 0 054 3550 0 5 5 055 500 0 90 05 9500 00 500 10 0 05 1 000 000 0 1 05 0 1 000 300 0 230 000 210 1 3 10 Chain sling, 2-leg with oversized master link and clevis sling hook 13 Grade 0 Specially for large crane hooks 0 45 45 0 0 45 45 0 3550 0 3 10 2312 500 3 10 2313 9500 00 500 3 10 2314 1 000 000 3 10 2315 0 1 000 3 10 23 14
Chain sling, 2-leg, adjustable with oversized master link and clevis sling hook Grade 0 Specially for large crane hooks 13 0 45 45 0 0 45 45 0 00 11 3 10 231 3550 0 3 10 231 500 3 10 23 9500 00 500 3 10 230 1 000 000 3 10 231 Chain sling, 2-leg with connecting link 12 Grade 0 For connecting the chain to master links and other accessories 0 45 45 0 1 0 232 3550 5 5 233 500 0 90 234 9500 00 10 0 235 1 000 0 1 23 0 1 300 0 23 000 3 10 23 Chain slings 15
Chain sling, 4-leg with clevis sling hook 13 Grade 0 Hook closes and locks automatically upon raising the load. 0 45 45 0 21 5 5 01 350 0 90 02 000 000 10 0 03 1 000 0 1 04 210 1 1 05 0 210 350 0 231 0 350 0 0 Chain sling, 4-leg with clevis safety hook 13 Grade 0 Hook closes and locks automatically upon raising the load. 0 45 45 0 21 5 5 0 350 0 90 09 000 000 10 0 1 000 0 1 01 210 1 1 02 0 210 350 0 232 0 350 0 04 Chain sling, 4-leg, adjustable with clevis sling hook 13/12 Grade 0 1 0 45 45 0 21 5 5 05 350 0 90 0 000 000 10 0 0 1 000 0 1 0 210 1 1 09 0 210 350 0 234 0 350 0 01
Chain sling, 4-leg, adjustable with clevis safety hook 13/12 Grade 0 Hook closes and locks automatically upon raising the load. 0 45 45 0 21 5 5 02 350 0 90 03 000 000 10 0 04 1 000 0 1 05 210 1 1 0 0 210 350 0 235 0 350 0 0 Chain sling, 4-leg with oversized master link and clevis sling hook 13 Grade 0 Specially for large crane hooks 0 45 45 0 21 5 5 232 350 0 90 233 000 000 10 0 234 1 000 0 1 235 210 1 1 23 Chain slings 1
Chain sling, 4-leg, adjustable with oversized master link and clevis sling hook 13 Grade 0 Specially for large crane hooks 0 45 45 0 21 5 5 23 350 0 90 239 000 000 10 0 2300 1 000 0 1 2301 210 1500 1 2302 Chain sling, 4-leg with connecting link 12 Grade 0 For connecting the chain to master links and other accessories 0 45 45 0 21 5 5 232 350 0 90 233 000 000 10 0 234 1 000 0 1 23 210 1 1 23 0 210 350 0 23 0 350 0 239 1
Load distributor Our load distributor provides higher working load limit for the same nominal size of rope or chain Example: Based on the example of a 4-leg chain suspension of grade 0 (nominal chain size, angle of inclination 0 45 ) we will demonstrate how you can double the working load limit of your chain. With a theoretically syetrical load distribution and equal leg length, all 4 legs can be load-bearing. The EN standards regard the 3 and 4 leg suspension gear as equivalent. This gives a working load limit of Suspension gear without load distributor Suspension gear with load distributor,000 for suspension gear with nominal size of chain By using a load distributor, small inaccuracies which occur in practice in the arrangement of the lifting points and permitted length tolerances in the legs can be balanced out. Therefore all 4 legs in the balancing area of the load distributor carry the load. This achieves a working load limit of 11,0 With a less exact distribution of lifting points or permitted leg length tolerances, only 2 diagonally-opposite legs carry the load (tilting or swinging of the load on the diagonals) BGR 500 Chapter 2./3.5.3. This reduces the working load limit of the chain suspension gear to using one and the same suspension gear. Chain sling, 4-leg, adjustable and load distributor, with clevis sling hook Grade 0 5 Chain slings 5,00 0 45 45 0 0 0 90 2391 0 10 0 2392 000 0 1 2393 1000 0 1 2394 0 350 0 2395 0 350 0 239 5 3500 0 0 239 19
Chain components Grade 0 Chain and components prograe 25 % higher working load limit than grade 0 enables change to smaller chain dimensions. This brings enormous cost and weight savings Long service life due to higher strength Components grade 0 complying with EN copmonents grade 0 acc. to with higher working load limits, powder-coated Chain grade 0 complying with EN 1 with higher working load limit, but temperature resistance is limited to 0 Identification mark and chain identification tag complying with EN 1. Chain is marked with identification number ( years traceability) For use in temperature range from working load limit (for use at temperatures outside this range, please consult PFEIFER) For sharp edges (radius smaller than nominal size of chain) we recoend reducing the selected type by 50 Quality-assured European production by manufacturer certified acc. to ISO 9001 Further versions available as standard Identification according to EN 1 Chain slings of grade 0 are identified by a ten-sided tag, on the number of legs, the nominal size of chain and the working load limit for angles of inclination 0 45 and 45 0 are specified. Round steel chain HIT Grade 0 Complying with EN 1 Part 1,2 with 25 % higher working load limit, but with restricted operating temperature of C to 0 C. Painted version. Nominal chain thickness 1. 24.9 2. 2 2.5 30.5 3.0 3 00 4.2 39 1.5 4. 4 000.2 4 21.5 5. 5 1.9 5 2. 9.4 21 000 11.9 29.5 9.2 Dimensions in ktg/m p W1 min W2 max 0.9 1..2 1 For round steel chains with temperature resistance of C to 0 C, please consult Pfeifer. 10
Master link for 1- and 2-leg chain slings Grade 0 Can also be used as end link. Dimensions in 1-strängig 2-leg NW 0 45 D L P 0.3 0 1 55 0.530 0 1 5 0.915 1 5 5 5 00 1.00 90 0 5 000 2. 2 0 10 59 1 4.1 32 1 0 0 1500.0 3 1 1 0.950 0 300 2 0 12. 45 10 3 3 The working load limit specification refers to the maximum working load limit of the component. Please refer to the working load limit table for the working load limits of chain suspension gears. Master link with intermediate links for 3 and 4-leg chain slings Grade 0 Dimensions in D D1 L L1 P P1 1.315 1 5 25 5 54 4 2.3 90 34 0 0 5 000 3.5 2 1 0 10 5 1. 32 1 50 0 115 210 9.50 3 2 1 5 1 3300.50 50 33 0 0 350 150 9 39900 25.0 50 3 0 5 350 10 0 The working load limit specification refers to the maximum working load limit of the component. Please refer to the working load limit table for the working load limits of chain suspension gears. Oversized master link for 1-leg chain sling Grade 0 Connection to the chain with CW link. ND // with transition link, ND and without transition link. For crane hooks DIN 151 D E T W up to 25 3,4 394 3 10 21099 Dimensions in up to 25 3,4 394 3 10 2153 up to 25 4, 2 4 3 10 3 00 up to 25 4,4 2 3 3 10 3 000 up to 25, 32 3 3 10 3 Chain slings 11
Oversized master link with intermediate links for chain slings, 2-leg Grade 0 Connection to the chain with CW links. For crane hooks NW 0 45 DIN 151 Dimensions in D T W E 3550 up to 25 3.5 3 10 394 210 3550 up to 25 3.5 3 10 394 2154 500 up to 25 5.1 2 3 10 4 39 9500 up to 25.0 33 3 10 425 1 up to 25 12.3 3 10 455 41 210 up to 25. 3 10 1524 Oversized master link with intermediate links for chain slings, 4-legs Grade 0 Connection to the chain with CW links. For crane hooks NW 0 45 DIN 151 Dimensions in D T W E 3550 up to 25 3.5 3 10 394 2155 500 up to 25 5.1 2 3 10 4 215414 000 up to 25.0 33 3 10 425 42 1 up to 25 12.3 3 10 455 43 210 up to 25 12.3 3 10 44 The specification of the working load limit applies only in the case of syetrical loading of all legs. Connecting link Grade 0 For connecting the chain to master link and other accessories Dimensions in A C P S R 0.0 14 1,5 45 5 0. 1 25 12 9,5 2 541 0.35 23 30 12 12,0 0 542 00 0.4 2 3 1,0 90 543 000 1. 33,5 5 544 000 2.05 42 4 29 25,0 1 545 000 3. 49 55 30 2.0 3 54 Clevis grab hook 12 Grade 0 For shortening and for loops that must not tighten themselves. For the direct connection to the chain. It can be used as a chain shortener with full working load limit due to its special shape. Dimensions in A G H R 0.,0 51 59 0.44,0 30 2 5 50 0.9,0 34 34 0 51 00 2. 1,0 4 4 5 52 000 3.,0 4 0 112 53 000 5. 23,5 4 5 11 54 000.0 2.0 5 154 55
Eye sling hook Grade 0 Standard sling hook with replaceable, forged safety latch. Dimensions in A D G H O R 0.25,0,5 1 5 0.50 2 11,0 29 25,0 1 5 0.9 31,0 2 33 34,0 1 59 00 1.90,0 33 42 43,0 159 590 000 3.30 45 24,5 50 50,0 13 591 000 4.50 52 2,0 4 53 55,0 3 592 000. 2 29,0 50 0 0,0 234 593 Clevis sling hook Grade 0 Forged safety latch For the direct connection to the chain. Dimensions in A G H R 0.25 15 9 04 0.50 2 2 95 05 1.00 31 25 33 1 0 00 1.0 30 0 000 3. 45 3 4 155 0 000 5.00 53 51 52 15 09 000 12.30 2 50 3 2 Safety hook Grade 0 Closes and locks automatically upon raising the load. With lock release on the back of the hook. Dimensions in A D G H O R T 0.50 2 11 21 21 9 35 594 0.9 34 12 2 25 5 43 595 1.5 45 25 30 33 5 59 00 3.25 51 35 5 9 59 000. 0 2 3 50 50 251 0 59 000 9.0 0 30 0 0 290 90 000 14. 0 32 2 0 0 3 0 23049 Clevis safety hook Grade 0 Closes and locks automatically upon raising the load. With lock release on the back of the hook. For the direct connection to the chain. Chain slings Dimensions in A G H R T 0.50 2 0.95 34 21 94 35 11 2 123 43 12 1.0 45 00 3. 51 25 30 143 5 35 10 9 14 000.00 000 9.0 0 3 50 215 0 15 0 0 253 90 23041 000 14. 2 2 0 2 0 23042 13
Swivel safety hook Grade 0 Standard version not rotatable under load. Dimensions in A D G H O R 0. 2 21 3 15 599 1.1 34 2 3 12 2.0 45 25 30 42 21 01 00 4.0 54 21 35 50 21 02 000. 2 24 3 50 2 3 03 Foundry hook Grade 0 Dimensions in A D G H O R 0.92 4,5 25 29 1 125 2304 1. 14,0 32 30 150 23049 00 2.2 9,0 3 2 13 230490 000 5.03 2 24,0 45 4 4 2 230491 000.0 114 2.0 54 0 5 230492 Hook may only be used where unintentional unhooking is not possible. 14
Bolt set for connecting link Spare part for connecting link, grade 0 incl. safety socket 3 39 41 42 43 44 Safety latch for eye sling hook Grade 0 Forged safety latch with spiral pin and spring. For simple replacement in the case of damage or wear. 1 1 21 Bolt set for clevis sling hook Spare part for fork hook, grade 0 incl. locking pin 0.00 24 0.00 25 0.00 2 0.00 30 0.00 33 0.00 3 0.00 3 Chain slings For coupling bolts for other hook types, please consult PFEIFER Safety latch for safety hook Grade 0 For simple replacement in the case of damage or wear. 0.05 45 0. 4 0. 4 0. 4 0.25 49 0. 230493 0. 230494 For coupling bolts for other hook types, please consult PFEIFER 15
Chain slings, 1-/2-/4-leg, Grade 0 PFEIFER is a supplier in the premium range. However, we can also supply chain slings and components in grade 0 on request. Grade 0 quality assured European manufacturing carried out by an ISO 9001 company chain and components according to EN 1 and EN chain bears a manufacturer's mark with identification- ( years retraceability) usable in temperature ranges from C to 0 C with 0 % in the case of sharp edges (radius smaller than nominal size of chain) we recoend that the chain s is reduced by 50 % in the selected method. Quality tag for chain slings, grade 0 32 Identification according to DIN EN 1, part 4 Chain slings of grade 0 are identified by an octagonal tag, on which the number of legs, the nominal size of chain and the working load limit for angles of inclination 0 45 and 45 0 are specified. The quality tags are included in the price of the new chains, but can also be purchased separately.
Further accessories for lifting slings can be combined as desired with ropes, chains, lifting belts and round slings Grade 0 WARNING: When grade 0 components are combined with special quality class 0 and/or quality grade 0 chains and building components or other attachment systems, it is always the of the weakest construction unit that is relevant for defining the (the wakest component determines the!) Assembly should only be carried out by experts. Chain shackle SCH straight design For nominal size of chain 11 0.05 Universal shackle with strong stud bolt. Ideal component for the connection of the chain legs to load clamps, small grabs etc. Red paint finish Grade 0 Chain shackle straight design Universal shackle with nut, bolt and split pin. For the connection of the chain legs to load clamps, small grabs etc. Red paint finish Grade 0 S-hook SM one side closed (not welded) Large aperture for special applications. Red paint finish According to BGR 500 these hooks may only be used where unintentional unhooking is not possible. Grade 0 B C D1 D2 E 11 24 13 000 0.09 0. 0.30 0.0 1 14 1 21 2 24 32 12 15 12 30 3 49 1 14 15 1 1 1.30 21 33 4 23 24 3 1 For nominal size of chain B D G L M 0.3 24 35 52 19 000 1 0.1 0.9 1.0 2.50 2 30 3 1 25 42 4 55 2 5 2 94 2 30 190 191 13 14 2 210 4.0 4 32 5 1 39 15 Dimensions in S-hook SM both sides open Large aperture for special applications. Red paint finish According to BGR 500 these hooks may only be used where unintentional unhooking is not possible. Grade 0 A 00 Dimensions in 0. 1.5 2..4 D 23 2 E 10 0 0 F 59 4 12 G 42 53 3 90 000 1.5 2.0 4.5 50 0 0 500 550 50 12 245 1 0 15 150 250 350 0. 0.25 0.45 D 12 14 500 50 00 00 0.5 1. 2. 3. 2 9 2 305 331 3 1 3 1 15 1 1 1 1500 20 0 4.00 5.90.50 9.0 2 32 3 3 31 432 114 12 9 150 114 12 9 150 19 10 11 12 Dimensions in E F 115 2 153 3 1 50 G 2 3 50 14 15 1 1 1 19 10 Chain slings Dimensions in 12 13 14 1
Galvanised round steel chains according to DIN, DIN 3 and 55 (Do not to use for lifting!) Round steel chain, short link, DIN in 30 m coil Galvanised True to gauge, tested Chains complying with this standard are used in the entire technical field. Round steel chain, long link, DIN 3 in 30 m coil Round steel chain, long link, DIN 55 in 30 m coil 2 00 00 Chain dimension d t 4 32 5 35 42 52 5 00 00 Chain dimension d t 4 32 5 35 42 52 5 Breaking force kn Galvanised Dimensionally untested chains for non-lifting applications e.g. bracing, fastening, closing off and for agriculture. Quick fastener for chains The practical component for the simple connection and extension of chains for non-lifting purposes. Steel, galvanised Extension chain link approx. /coil 9. 15.0 24.0 42.0 12 12 12 129 9.0 130 approx. /coil.1 12.9 1.9 131 132 133 33.0 52.5 134 135 approx. /coil.1 12.9 1.9 13 13 13 33.0 52.5 139 1 Breaking force kp 500 B D G H 3.5 5.0 5.0.5 29 39 per pieces 41 3500 5500 14 1.0.0.0.5.0 12.0 45 0 9 42 43 44 Dimensions in D L W 4 4 per pieces 45 5 5 23 2 3 3 9 14 1 4 4 4 49 Nominal size For the simple connection and extension of chains for subordinate purposes. Steel, galvanised Breaking force kn Galvanised Not true to gauge, tested chains for non-lifting applications e.g. bracing, fastening, closing off and for agriculture. 1 00 00 Chain dimension d t 4 5 1.5 1.5 24 Breaking force kn Dimensions in