ABOVEGROUND WATER TANKS LIST PRICE EFFECTIVE: JANUARY 1, 2018 PUBLICATION NO. PG 11020F SUPERSEDES PG 11020E 01/18
TABLE OF CONTENTS: Economy Water Tanks (Non-Potable)...3 Potable Water Tanks (FDA Approved Resin)...4 Miscellaneous Tank Accessories...5 CONDITIONS OF SALE Containment Solutions, Inc. (CSI) fiberglass aboveground water storage tanks are to be installed according to NFPA 30 or 31A and current installation instructions as outlined in Pub. No. INST 6053. Local codes may apply and should be consulted. Fiberglass tanks require a proper foundation and good construction practices during installation. All tanks are for the storage of potable or non-potable water at ambient termperatures. The proper handling, installation and care of all tanks are the responsibility of the purchaser and any loss or damage resulting from improper installation, handling or care, or from storage of a product not approved by CSI, shall not be the responsibility of CSI. General terms and conditions of sale apply to these products and are stated in CSI Terms and Conditions as written on the Order Acknowledgement and Invoice. All prices are stated in USD and subject to change without notice. SHIPPING TERMS F.O.B. Manufacturing Plants: Bakersfield, California Belton, Texas All prices herein are F.O.B. shipping point. Freight invoiced to customer, sellers routing. Fuel surcharges may be added to the invoice as necessary. All orders subject to minimum-order value. Taxes not included. CUSTOMER PICK UP/ACCESSORY DELIVERY CHARGE: Skid charge (2,500 gallon capacity and similar) Unit Price $550 Net Per Tank Customer pick up $220 Net Per Tank Nylon straps (export, minimum of 2) $250 Net Per Strap UPS accessory shipment $120 Net Per Box Payment Terms: 50% deposit required with order. Balance subject to approval or as shown on the invoice. Owner is responsible for fully disclosing to CSI the intended usage and contents stored for each tank. WARRANTY Product warranties are available on the CSI website or by calling your local sales representative. Product Warranties are suspended until the CSI invoice is paid in full.
ECONOMY WATER TANKS (NON-POTABLE) NOMINAL CAPACITY (GALLONS) CYLINDER OVERALL TANK LIST PRICE [1] 15 6 20,000 14 2 16 6 $15,950 18,000 12 10 15 2 $14,365 16,000 19 0 20 10 $12,770 12 14,000 16 8 18 6 $11,185 12,000 14 4 16 2 $9,580 10,000 11 10 13 8 $9,335 9,000 15 4 16 11 $9,085 10 8,000 13 8 15 3 $8,660 7,000 12 0 13 7 $8,220 6,000 10 4 11 11 $8,090 5,000 8 8 10 3 $7,925 8 4,000 10 8 12 0 $6,600 3,000 8 0 9 4 $6,525 2,500 6 8 8 $5,545 2,000 9 6 10 7 $4,435 6 1,750 8 4 9 5 $3,880 1,500 7 2 8 3 $3,325 1,250 6 0 7 1 $2,770 Notes: [1] Tank prices include only what is specified on the standard tank drawing. 3
POTABLE WATER TANKS (FDA APPROVED RESIN) NOMINAL CAPACITY (GALLONS) CYLINDER OVERALL TANK LIST PRICE [1] NSF COATING SYSTEM [2] 15 6 20,000 14 2 16 6 $27,265 $4,455 18,000 12 10 15 2 $24,540 $4,010 16,000 19 0 20 10 $21,840 $3,570 12 14,000 16 8 18 6 $19,255 $3,150 12,000 14 4 16 2 $16,510 $2,700 10,000 11 10 13 8 $15,195 $2,490 9,000 15 4 16 11 $14,670 $2,400 10 8,000 13 8 15 3 $13,025 $2,130 7,000 12 0 13 7 $11,355 $1,855 6,000 10 4 11 11 $10,250 $1,675 5,000 8 8 10 3 $9,465 $1,550 8 4,000 10 8 12 0 $8,075 $1,320 3,000 8 0 9 4 $6,775 $1,105 2,500 6 8 8 $6,255 $1,025 2,000 9 6 10 7 $5,555 $910 6 1,750 8 4 9 5 $5,290 $865 1,500 7 2 8 3 $4,845 $790 1,250 6 0 7 1 $4,440 $725 Notes: [1] Tank prices include only what is specified on the standard tank drawing. [2] Coating system certified NSF / NSFANSI 61. 4
MISCELLANEOUS WATER TANK ACCESSORIES FRP Full Couplings (Fig. 1) Diameter Unit Price WTD-30005 ½ $205 WTD-30007 ¾ $205 WTD-30010 1 $205 WTD-30012 1¼ $205 WTD-30015 1½ $205 WTD-30020 2 $205 WTD-30030 3 $225 WTD-30040 4 $260 WTD-30060 6 $345 WTD-30080 8 $480 Fig. 1 Fig. 2 Fig. 3 FRP Half Couplings (Fig. 2) WTD-31005 ½ $160 WTD-31007 ¾ $160 WTD-31010 1 $160 WTD-31012 1¼ $160 WTD-31015 1½ $160 WTD-31020 2 $160 WTD-31030 3 $185 WTD-31040 4 $225 WTD-31060 6 $275 WTD-31080 8 $425 Fig. 4 Fig. 5 Fig. 6 Vents (Fig. 3) (Fig. 4) [1] [2] WTP-71015 (Fig. 3) 1½ $365 WTP-71020 (Fig. 3) 2 $465 WTP-71030 (Fig 4) 3 $595 WTP-71040 (Fig 4) 4 $835 WTP-71060 (Fig 4) 6 $1,015 WTP-71080 (Fig 4) 8 $1,220 Manways (Fig.5) Fig.6) [3] Model Diameter Unit Price Top PP Spin-On WTP-42180 18 $295 Top PP Spin-On WTP-42240 24 $365 Side FRP Bolt-On WTP-43180 18 $1,625 Side FRP Bolt-On WTP-43240 24 $1,975 Notes: [1] All vent include a protective insect screen. [2] Vent MUST be equal to or larger than largest inlet or outlet fitting. [3] PP - Poly Propylene FRP - Fiberglass Reinforced Plastic 5
333 North Rivershire Drive, Suite 190 Conroe, Texas 77304 Tel: (936) 756-7731 Fax: (936) 756-7766 www.containmentsolutions.com While Containment Solutions has taken every precaution as to the accuracy of content and data presented herein, Containment Solutions cannot be held responsible for the individual interpretation of the data presented, any loss or damage to any property whatsoever, injury or death to any persons whatsoever, or any claims, demands, actions, complaints, proceedings, judgment, losses, damages, compensation, liabilities, costs or charges, however arising from the unauthorized undirected use of this handbook or the data it contains. 2018 Containment Solutions, Inc. All Rights Reserved Pub. No.PG 11020F