Load Rating Charts C-Series Cranes 3001
|
|
|
- Elfreda Fisher
- 5 years ago
- Views:
Transcription
1 Load Rating Charts C-Series Cranes July 2003
2
3 Capacities: Capacities Overloading this crane or failing to comply with operating conditions and restrictions given on Capacity Chart can result in structural damage to crane components, collapse of crane, or tipping. Read all instructions on Capacity Chart before operating crane. Do not lift any load without first determining total load to be lifted and maximum radius at which load can be lifted. Radius shall govern load rating. Only use boom angle as a guide in positioning boom near corresponding radius for a given load. EXCEPTION: Boom angle shall govern load rating of jib when boom is not fully extended. Load Rating The load ratings given on the Capacity Chart do not exceed a maximum stability tipping factor of 85 percent. The main boom and jib load ratings above the heavy line on the Capacity Chart are based on the crane s hydraulic or structural competence and not on stability. The main boom and jib load ratings below the heavy line are stability limited capacities and do not exceed 85 percent of tipping. Before lifting any load, the operator shall ensure that: The crane is properly mounted on a truck that meets factory specifications. The crane is properly counterweighted, if required. The outriggers and stabilizers are extended on a firm, uniformly supporting surface so crane is level in all directions. The exact weight of the load to be lifted is known. The weight of the stored jib, if equipped, and all load handling devices are deducted from the load ratings given on the Capacity Chart. See Total Load near end of section. The area of operation shown on the Capacity Chart is not exceeded. The load rating has been reduced to compensate or wind, ground conditions, out-of-level conditions, and the dynamic effects of swinging, hoisting, and lowering the load. Note This model crane has been given a stability test in compliance with ANSI B30.5 requirements. If the crane owner mounts the crane on the truck, he may have to perform a stability test in compliance with special instructions furnished by Manitex on request. Load Charts C 1
4 Capacities: Total Load The weight of the stored jib, if equipped, and all load handling devices are considered part of the total load. To determine the total load to be lifted, use the following worksheet. Component Weights See Deductions on Capacity Chart. Pounds 1. Stored Jib or Erected Jib (if equipped)* Overhaul Ball or Load Block (depending on which is used) Auxiliary Block (if installed) Auxiliary Sheave (if installed) Hose Reel (if equipped) Man Steel Basket (empty weight) Man Steel Basket (empty weight) Man Fiberglass Basket (empty weight) Slings and all other Load Handling Devices *Disregard when determining total load to be lifted with the jib. Totals A. Total Component Weights (ADD 1 through 9) B. Weight of Load to be Lifted C. Total Load to be Lifted (ADD A and B) Once the total load has been determined, refer to the Capacity Chart to determine the maximum radius at which the load can be handled ft. Refer to the Capacity Chart to determine the parts of line required to handle the total load to be lifted. The load charts in this booklet are reference copies only. For planning actual lifts refer to the load charts installed on the crane. 2 Load Charts C
5 Capacities: This page intentonally left blank Load Charts C 3
6 Capacities: Load Chart 30102C Load Chart 30102C RANGE DIAGRAM BOOM LENGTH IN FEET A B C D SEE WARNING NOTE 5 HEIGHT ABOVE GROUND IN FEET OPERATING RADIUS FROM CENTERLINE OF ROTATION IN FEET LMI OPERATING CODES ALLOWABLE LINE PULL DEDUCTIONS FROM RATED LOADS FOR LOAD HANDLING DEVICES SUPPLIED BY MANITEX WARNING 4 Load Charts C
7 Capacities: Load Chart 30102C A B C D WARNING INFORMATION DEFINITIONS AREA OF OPERATION Load Charts C 5
8
9
10 Manitex 3000 S. Austin Ave Georgetown, TX Sales: (512) Sales Fax: (512) Service: (512) Service Fax: (512) Web Site:
Liftcrane Boom Capacities 2250 SERIES 3
Liftcrane Capacities 2250 SERIES 3 No. 44 With Long Reach Top LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of
Liftcrane Boom Capacities 999 SERIES 2. Manitowoc Cranes, Inc.
Liftcrane Capacities No. 82 or 22EL LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of a static tipping load. Capacities
Series 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Series 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Series 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL - 125 TON CAPACITY 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 lbs.) Min 11 82.8-91090 250000 250000 47 10 12 81.3-87730
Liftcrane Boom Capacities Boom No. 58 HL 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating SERIES 3
ANSI B30.5 Liftcrane Boom Capacities Boom No. 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating 16000 SERIES 3 LIFTING CAPACITIES: Lifting capacities for various boom lengths
Series 1300 Hydraulic Crane 30 Ton Load Ratings
Series 13 Hydraulic Crane Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
LOAD CHART & RIGGING PRACTICE EXERCISES
LOAD CHART & RIGGING PRACTICE EXERCISES HYDRAULIC LATTICE CRANE Crawler Crane Kobelco CK1600-II 160 Ton CraneSafe Certification Document #: Lattice Hydraulic Crane Practice LCR.LHC.KB1600.160.P1(131009)
4600 SERIES 3 RINGER SERIES 2. Manitowoc Cranes, Inc. Manitowoc, Wisconsin U.S.A.
Liftcrane Capacities No. 35 thru 1 Degree Static Machine LIFTING CAPACITIES: Lifting capacities are for a RINGER when operating on a barge. Machine shall be positively secured to prevent shifting. Lifting
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC300 SERIES TELESCOPIC CRANE 2 CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6
LOAD CHARTS MANTIS 6010LP 30 TON TELE-BOOM CRAWLER CRANE 1 V FT MAIN BOOM, 20 FT EXTENSION & 20 FT JIB
0 FT MAIN BOOM, FT EXTENSION & FT JIB in in in in 1 LIFTING CAPACITIES IN THOUSANDS OF POUNDS; 3, % OF TIPPING, FIRM & LEVEL GROUND MAIN BOOM with TRACKS FULLY EXTENDED 11,0 lb COUNTERWEIGHT ZERO COUNTERWEIGHT
40' ' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2
Range Diagram and Lifting Capacity Cranes 100 TON LIFTING CAPACITY 40' - 97.3' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2 CRANE WORKING CONDITIONS DIMENSIONS ARE FOR LARGEST FACTORY FUR- NISHED
MODEL CKE2500-II TON CAPACITY
LIFTING CHARTS - Crawler Cranes KOBELCO MODEL - 275 TON CAPACITY Luffing Jib Working Ranges Boom Angle: 88 125 54.9 m 51.8 m 48.8 m 45.7 m 42.7 m 39.6 m 3 m 33.5 m 30.5 m 57.9 m 120 115 110 105 100 95
CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
series 2802 product guide features BOOM TRUCKS
series 2802 BOOM TRUCKS features 28 Ton (24,4 mton) Capacity 4-Section 102' (31,0 m) Proportional Boom 4-Section 92' (28.0 m) Proportional Boom 2-Section 26' (7,9 m) to 46' (14,0 m) Telescopic Jib 157'
CONTENTS CM300.1 SERIES TELESCOPIC CRANE
CM300.1 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features... 4 3051T Chassis... 5 30100C Chassis... 6 Outrigger Extension...
Courtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
MANTIS 6010 LOAD CHART 80'-0 STANDARD BOOM LOAD CHART. MANTIS Model 6010
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by Tadano Mantis Corporation meets the requirements of ASME B30.5. Structure and stability have been tested in accordance
47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
2 TC400 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 TC400 Chassis Data - S Models... 5 TC400 Chassis Data
CONTENTS TC400 SERIES TELESCOPIC CRANE
TC400 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 TC400 Chassis Data - S Models... 5 TC400 Chassis Data
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 9310-225 TON CAPACITY 9310 1 LIFT RATINGS With Tubular and "S-S" Counterweight (135,000 Lbs.) 17 81.4-450,000 76 12 20 78.9-336,000 75 9 25 74.7 195,030 230,290
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
series 2801 product guide features B O O M T R U C K S 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom
series 2801 B O O M T R U C K S features 28 Ton (24,4 mton) Capacity 4-Section 92' (28 m) Proportional Boom 149' 1" (45,4 m) Maximum Tip Height 103' (31,4 m) Maximum Main Boom Tip Height 2-Section 26'
UPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113
BT 3870 BOOM TRUCK CRANE BT Features:
BOOM TRUCK CRANE Data Sheet - Imperial Features: Capacity at rated distance from center of rotation: 19 T @ 5 ft Maximum boom length: 70 ft Maximum tip height: 80 ft Optional Single Stage 24 ft or 24-40
CONTENTS ////////////////////////////////////////////////////////////////////////////////////////
TC450 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7250-60 TON CAPACITY 7250 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 Lbs.) 11 82.8-120000 46 6 12 81.3-120000 46 6 15 77.0-106950
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
LOAD CHART. MANTIS Model 10010MX. 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation.
MANTIS Model 10010MX 111.5 ft STANDARD BOOM LOAD CHART MANTIS Model 10010MX 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation. with Standard 111.5 ft Main
HC 275 CAL CRANE & EQUIPMENT. Tel: 1 (844) Fax: 1 (510)
CAL CRANE & EQUIPMENT Tel: 1 (844) 882-2415 Fax: 1 (510) 639-53 crane-sales@calcrane.com www.calcrane.com Demag 275 tons (249.5 m) maximum lift capacity Power up/down and freefall on main and auxiliary
LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)
T 775. truck crane 75 ton capacity. range diagram & lifting capacities. Range Diagram (40' - 126' boom)
T 7 truck crane ton capacity range diagram & lifting capacities DEFLECTIONS NOT SHOWN 6' - 9" 4' - 8" DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED
LEVEL 1 MOBILE CRANE THEORY EXAM PRACTICE QUESTIONS
LEVEL 1 MOBILE CRANE THEORY EXAM PRACTICE QUESTIONS Version 1.1 October 27, 2017 INTRODUCTION The following practice questions are representative of a Level 1 Mobile Crane Theory Exam. These will give
CRANE RATING MANUAL HTC
SERIAL NUMBER: XXXX- XXXX CRANE RATING MANUAL HTC- 8611 TELESCOPIC BOOM TRUCK CRANE - 164.1 SIX SECTION LATCHING BOOM For Replacement, Order Part Number: T2P38 (116) R Link-Belt is a registered trademark.
CONTENTS TC700 SERIES TELESCOPIC CRANE
TC700 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////// Crane Features... 4 Range Diagram... 5 Load Chart: Main Boom... 6 Load Chart: Main Boom... 7
For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations
HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER For Replacement, Order Part Number: L8P0001 (022603) Link Belt is a registered trademark. Page Contents 3 Operating Instructions
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS:
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities Telescopic Boom Truck Crane 140
Range Diagram and Lifting Capacity T Cranes RANGE DIAGRAM BOOM
Range Diagram and Lifting Capacity T340-1 Cranes RANGE DIAGRAM 30-94 BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH
CONTENTS TM200 TELESCOPIC CRANE
TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 40' - 126'
Range Diagram and Lifting Capacity Cranes 80 TON LIFTING CAPACITY RANGE DIAGRAM 40' - 126' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC500 SERIES TELESCOPIC CRANE CONTENTS 2 /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
AMERICAN MODEL 5299A - 60 TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 5299A - 60 TON CAPACITY (POUNDS') FROM POINT 40' 11 80.5 120,000 * 45 ( 12.2 M) 12 79.0 110,020 * 44 15 74.6 81,530 44 20 66.9 52,290 42 25 58.8 38,280 39
TADANO MODEL TR-300XL-3-30 TON CAPACITY WORKING RANGE CHART. LIFTING CHARTS - Rough Terrain Cranes
LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 30 TON CAPACITY WORKING RANGE CHART NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm supporting surface.
bt USt Lifting Capacity Boom Truck Cranes Datasheet Imperial View thousands of Crane Specifications on FreeCraneSpecs.
28 USt Lifting Capacity Boom Truck Cranes Datasheet Imperial bt 28106 Features 28 USt @ 6 ft capacity at rated distance from center of rotation 106 ft maximum boom length 115 ft maximum tip height 30/47
Load Chart Exercise Workbook
Load Chart Exercise Workbook (508) 212-4735 Copy Right 2017 For Exam Use Only BRODERSON IC-80-2D RATED LIFTING CAPACITIES IN POUNDS LOAD RADIUS IN FEET 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 ON RUBBER
Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt
Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
KEY ////////////////////////////////////////////////////////////////////////////////////////////////////////
CONTENTS //////////////////////////////////////////////////////////////////////////////////////// KEY ////////////////////////////////////////////////////////////////////////////////////////////////////////
LINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL HTC-840-40 TON CAPACITY RANGE DIAGRAM NOTE: and fly and jib geometry shown are for unloaded condition and machine standing level on firm supporting
series 3001 product guide features B O O M T R U C K S
series 3001 B O O M T R U C K S features 30 Ton (27,3 mton) Capacity 4-Section 102' (31 m) Proportional Boom 3-Section 71' (21,6 m) Proportional Boom 2-Section, 26' (7,9 m) to 46' (14 m) Jib 112' (34,1
series SX B O O M T R U C K S
features Max 30 ton (27,2 mton) Capacity series SX B O O M T R U C K S 5-Section 124 (37,8 m) Proportional Boom 1-Piece 31 (9,5m) Jib 4-Section 102 (31,1 m) Proportional Boom 2-Section 26 (7,9 m) to 46
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER TMS9000E - S/N 1 TMS9000E - S/N 2 CONTENTS GENERAL NOTES...11 WEIGHT REDUCTIONS AND WARNING NOTES... 12 COUNTERWEIGHT CONFIGURATIONS... 13-15 LIFTING AREA
series 2202 B O O M T R U C K S
features 22 Ton (20 mton) Capacity 4-Section 101 (30,8 m) Proportional Boom 3-Section 77 (23,5m) Proportional Boom 29 (8,8 m) Fixed Jib 29 (8,8 m) to 52 (15,9) Telescopic Jib 139 10 (42,6 m) Maximum Tip
CONTENTS TC500 SERIES TELESCOPIC CRANE
CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// KEY ///////////////////////////////////////////////////////////////////////////////////////////////////////////////
Range Diagram and Lifting Capacity T Cranes. View thousands of Crane Specifications on FreeCraneSpecs.com RANGE DIAGRAM BOOM
Range Diagram and Lifting Capacity Cranes RANGE DIAGRAM 30-94 BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH UPPERSTRUCTURE
For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX
SERIAL NUMBER: XXXX-XXXX CRANE RATING MANUAL RTC-8090 Series II 5 - Section Boom For Replacement, Order Part Number: N4P0090 (110509) R Link-Belt is a registered trademark. 1of96 N4P0091 Table Of Contents
KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning
CRANE RATING MANUAL HTC
SERIAL NUMBER: CRANE RATING MANUAL 5---Section Boom For Replacement, Order Part Number: N3P0199 (031907) R Link-Belt is a registered trademark. 1of244 N3P0200 Table Of Contents Page Contents 3---4 Operating
series 2201 product guide features B O O M T R U C K S 22 Ton (19,9 mton) Capacity 4-Section 81' (24,7 m) Proportional Boom
series 2201 B O O M T R U C K S features 22 Ton (19,9 mton) Capacity 4Section 81' (24,7 m) 3Section 77' (23,5 m) 3Section 62' (18,9 m) 3Section 50' (15,2 m) 92'6" (28,2 m) Maximum Main Boom Height 133'2"
Cranes. Range Diagram and Lifting Capacity RT TON LIFTING CAPACITY RANGE DIAGRAM 33' - 110' BOOM
Range Diagram and Lifting Capacity Cranes 55 TON LIFTING CAPACITY RANGE DIAGRAM 33' - 110' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
OPERATING RADIUS/LIFTING HEIGHT CHART
LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 50 TON CAPACITY OPERATING RADIUS/LIFTING HEIGHT CHART NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm
series WL product guide features
series WL BOOM TRUCKS features 4-Section 124 (37,8 m) or 102 (31,1 m) Proportional boom 135 (41,2 m) Maximum main boom tip height Custom boom point adapter for auxiliary hoist operations 22 4 (6,8 m) A-frame
HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE
MANITOWOC (Crawler Mount) LOAD CHART
For Use in CCO Written Examinations MANITOWOC (Crawler Mount) LOAD CHART LATTICE BOOM CRAWLER CRANE (LBC) These charts have been adapted from the original manufacturer s charts for use in CCO Written Examinations.
BT 2047 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features: BT Features: BT 2047
BT 2047 BT 2057 10 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 2047 BT 2057 Model: BT 2047 Features: BT 2047 10 US t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum
RT555 TEREX. rough terrain crane 55 ton capacity. range diagram & lifting capacities. Range Diagram ( boom) HOOK BLOCK WEIGHTS
TEREX RT5 rough terrain crane ton capacity range diagram & lifting capacities DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED Range Diagram (33-1
data model 2892S product guide contents features 28 ton (25,4 mton) capacity 4-section, 92' (28,0 m) proportional boom
data features 28 ton (25,4 mton) capacity 4-section, 92' (28,0 m) proportional boom 101' 9"(31,0 m) maximum main boom tip height 147' 9" (45,0 m) maximum tip height with telescoping jib 2-section, 26'
Range Diagram and Lifting Capacity RT230. Cranes 30 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM REDUCTION IN MAIN BOOM CAPACITY
Range Diagram and Lifting Capacity Cranes 30 TON LIFTING CAPACITY RANGE DIAGRAM 30' - 94' BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER
DEMAG MODEL AC TON CAPACITY
LIFTING CHARTS - All Terrain Cranes DEMAG MODEL - 100 TON CAPACITY Working Range Main Boom 1 Liing capacities main boom in 39,700 lb 25' 3'' x 23' 360 85% Main Boom () 0 over rear 35.8 52.8 70.2 70.5 82.0
Cranes. OSHA Office of Training & Education 1
Cranes OSHA Office of Training & Education 1 Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures OSHA Office of Training & Education 2 How Do Accidents Occur? Instability
DEMAG AC TONNE ALL TERRAIN HYDRAULIC CRANE WITH SUPERLIFT
200 TONNE ALL TERRAIN HYDRAULIC CRANE WITH SUPERLIFT AC-615 200 TONNES MAX LIFT R 5500 13100 4675 2050 AC-615 200 TONNES MAX LIFT 5950 3600 10050 4145 16890 14195 GENERAL DIMENSIONS WORKING RANGE - MAIN
LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom Capacities ft. ( m)
Hydraulic Lattice Crawler Crane Tube Capacities 60 330 ft. (18.29 100.58 m) 250 ton (227 metric ton) 35 ft. (10.67 m) Live Mast Capacities On Outrigger Jacks On Side Frames 10 ft. (3.05 m) Extension Lifting
Series 900H Hydraulic Crane 27 Ton Load Ratings
Series 0H Hydraulic Crane 27 Ton Load Ratings DNGER N UNTRINED OPERTOR SUBJECTS HIMSELF ND OTHERS TO DETH OR SERIOUS INJURY YOU MUST NOT OPERTE THIS CRNE UNLESS You have been trained in the safe operation
80 Tonnes & Under. Restriction: 20 Tonnes & Under. CraneSafe Certification
Load Chart LEARNING GUIDE mobile hydraulic CRANE 80 Tonnes & Under Restriction: 20 Tonnes & Under Lorain LCD-150 Mobile Hydraulic 80 Tonnes & Under (Res 20 Tonnes) LEARNING GUIDE LC.M80R20.LRLCD150.PEX1.LG1
TM 3851 TM USt Lifting Capacity Boom Truck Crane Datasheet Imperial. Features
19 USt Lifting Capacity Boom Truck Crane Datasheet Imperial Features 19 USt @ 5 ft capacity at rated distance from center of rotation 51 ft maximum boom length 61 ft maximum tip height 18/29 ft optional
HYDRAULIC CRAWLER CRANE CK2500
HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco
NATIONAL MODEL 990A - 26 TON CAPACITY
LIFTING CHARTS - Boom Trucks NATIONAL MODEL 99A - 26 TON CAPACITY Load Chart Rating: Series 99A (27.4 m) Boom with 44 ft. (13.4 m) Jib 2ND JIB 44FT 1ST JIB 25FT LENGTH IN FEET 9 54 27-1 2 8 7 6 A B C D
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes AMERICAN MODEL 7260-100 TON CAPACITY 7260 1 LIFT RATINGS with Tubular Chord Hammerhead and "S-S" Counterweight (49,700 lbs.) (15,150 kg.) () From 11 82.8 200000 46 8 12
series product guide features UPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. 19 9.75 6,04 m FULL SPREAD 13 7.00 4,14 m INTERMEDIATE SPREAD AREA OF OPERATION 7 4.50 2,24 m RETRACTED SPREAD
~TEREX Utilities 200 Edenway, White House, TN, Phone: Fax:
~TEREX Utilities 200 Edenway, White House, TN, 37188 Phone: 800-672-4911 Fax: 615-672-0733 Tallahassee Electric Operation 2602 Jackson Bluff Rd Tallahassee FL 32301 Phone: 850-891-5531 Fax: 850-891-5162
Cranes. Range Diagram and Lifting Capacity RT345-1XL 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM
Range Diagram and Lifting Capacity RT345-1XL Cranes 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK
data model 22101S product guide contents features 22 ton (20 mton) capacity 4-section, 101' (30,8 m) proportional booms
data features 22 ton ( mton) capacity 4-section, 1' (, m) proportional booms 1' "(33,7 m) maximum main boom tip height 139' " (42,6 m) maximum tip height with jib 2' (,5 m) fixed jib 2-speed planetary
You can own this equipment with our Lease to Buy Monthly Payment of $ on approved credit by lender!
Sacramento: 916.440.8090 Reno: 775.972.7677 Santa Ana: 714.265.6550 www.coastlinecd.com Sacramento Location 325 North 5th Street Sacramento, CA 95811 You can own this equipment with our Lease to Buy Monthly
BT 4792 RM 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
GIUFFRE.COM. SkyCrane. SC series. product guide. features GIUFFRE BROS CRANES INC. Aerial Lifts and Cranes
features Working Heights to 97' Dual purpose machine; aerial platform and crane Multiple tool and lamp box options Extra long lamp box option in sub-frame Easy ground level entry to Aerial platform Aerial
series 5002 B O O M T R U C K S
series 5002 B O O M T R U C K S features 50 Ton (45,4 mton) Capacity 4-Section 110 (33,5 m) Proportional 4-Section 96 (29,3 m) Proportional 2-Section 32 (9,8 m) To 49 (14,9 m) Telescopic Offset Jib (15,
BT 4792 RM 4792 BT 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
BT 2047 BT 2057 BOOM TRUCK CRANE BT 2047 BT 2057 DATASHEET - IMPERIAL. Features: BT Features: BT 2057
BOOM TRUCK CRANE BT 2057 DATASHEET - IMPERIAL BT 2057 Model: Features: 10 t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum boom length 56 ft 5 in maximum tip height 18 30 ft optional
Range Diagram and Lifting Capacity RT665. Cranes 65 TON LIFTING CAPACITY RANGE DIAGRAM 36' - 111' BOOM REDUCTION IN MAIN BOOM CAPACITY
Range Diagram and Lifting Capacity Cranes 65 TON LIFTING CAPACITY RANGE DIAGRAM 36' - 111' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED COUNTER
BT 3063 BOOM TRUCK CRANE DATASHEET - IMPERIAL. Features
BOOM TRUCK CRANE DATASHEET - IMPERIAL Features 15 t @ 5 ft capacity at rated distance from center of rotation 63 ft maximum boom length 73 ft maximum sheave height 24/40 ft optional jib 113 ft maximum
GIUFFRE.1 BT 3870 GIUFFRE BROS CRANES INC. BT To learn more about this model, call or visit giuffre.com today!
19 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial Features: 19 US t @ ft capacity at rated distance from center of rotation 70 ft maximum boom length 80 ft maximum tip height Optional single
series 5002 B O O M T R U C K S
series 5002 B O O M T R U C K S features 50 Ton (45,4 Mton) Capacity 4-Section 110 (33,5 M) Proportional 4-Section 96 (29,3 M) Proportional 2-Section 32 (9,8 M) To 49 (14,9 M) Telescopic Offset Jib (15,
HC 110 Hydraulic Crawler Crane 110 t Lifting Capacity HC 110 HYDRAULIC CRAWLER CRANE
HC Hydraulic Crawler Crane t Lifting Capacity HC HYDRAULIC CRAWLER CRANE tons ( mt) maximum lifting capacity 2 ft ( m) maximum length of main boom 200 ft + ft (61 m + 21 m) maximum boom and jib HC HIGHLIGHTS
Heavy Equipment & Rigging Specialist Training
Heavy Equipment & Rigging Specialist Training Module 3 Unit 1: Crane Load Chart Basics 23Mar08 1 Unit Objective After completion of this unit, you will be able to deploy a mobile crane safely and efficiently
Working Range Diagram
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY Working Range Diagram Working Range Diagram 40 20 2 190 180 61 Fly + 115 170 160 10 8.5 61 Fly + 95 36.5 Fly + 115 150 140 36.5
HC USt capacity Hydraulic crawler crane Datasheet imperial HC 110
HC USt capacity Hydraulic crawler crane Datasheet imperial HC CONTENTS HC Page: Key........................................................................................... 3 Highlights.....................................................................................