GIUFFRE.COM. SkyCrane. SC series. product guide. features GIUFFRE BROS CRANES INC. Aerial Lifts and Cranes

Size: px

Start display at page:

Download "GIUFFRE.COM. SkyCrane. SC series. product guide. features GIUFFRE BROS CRANES INC. Aerial Lifts and Cranes"

Wilfred Marsh
5 years ago
Views:

features Working Heights to 97' Dual purpose machine; aerial platform and crane Multiple tool and lamp box options Extra long lamp box option in sub-frame Easy ground level entry to Aerial platform

1 features Working Heights to 97' Dual purpose machine; aerial platform and crane Multiple tool and lamp box options Extra long lamp box option in sub-frame Easy ground level entry to Aerial platform Aerial remote controls Ground hydraulic controls Remote engine start / stop Auxiliary power unit Hydraulic and Gravity leveled platforms Platform Mounted Jib with Hydraulic Winch 3 Work Area Continuous Rotation Crane Tip Heights: 57,, 7, 5 & 92 Nylatron pad equipped booms Up to 6, lb lift capacity Up to, lb lift capacity for SC 5 Detachable load line Radio anti-two block system Rugged, Weatherproof, Automotive style electrical system ORS Face Seal hydraulic fittings and adapters Unparalleled machine stability Heavy duty sub-frame Clamp-on mounting Design meets ANSI A92.2 and ANSI B3.5 recommendations SkyCrane SC series Aerial Lifts and Cranes product guide 6635 SOUTH 13TH ST. - MILWAUKEE, WI

SkyCrane series GENERAL SPECIFICATIONS BOOM Boom Sections - -plate design, telescopic booms equipped with teflon-plugged nylatron wear pads for smooth operation.

-section boom telescope system consists of a telescoping cylinder and wire rope crowds. Boom Point - Boom tip designed to easily accept Manitex Skycrane platforms.

SC 5 only, Quick Reeve boom point design, accepts Manitex Skycrane platforms; facilitates parts of line configuration changes.

HOIST Winch - Single or two speed planetary winch; wet multi-disc internal brake, spring applied, hydraulically released.

2 SkyCrane series GENERAL SPECIFICATIONS BOOM Boom Sections - -plate design, telescopic booms equipped with teflon-plugged nylatron wear pads for smooth operation. Nylatron wear pads easily accessible for lubrication, inspection and replacement. 3-section booms extend and retract by internal telescoping hydraulic cylinder. -section boom telescope system consists of a telescoping cylinder and wire rope crowds. Boom Point - Boom tip designed to easily accept Manitex Skycrane platforms. Detachable boom point sheave bracket (except SC 5) allows for easy removal and stowage of load line for aerial platform operation. SC 5 only, Quick Reeve boom point design, accepts Manitex Skycrane platforms; facilitates parts of line configuration changes. Boom Elevation - Double acting hydraulic cylinder; working range from below horizontal to above. Counterbalance valves hold cylinder and boom in position. HOIST Winch - Single or two speed planetary winch; wet multi-disc internal brake, spring applied, hydraulically released. SC62,SC65,SC75 SC5 SC97 Max Line Pull 5376 lb 779 lb 575 lb Max Line Speed 7* 16* 333* Rope Capacity 13 ft 219 ft 3 ft *ft/min Wire Rope - 3/ or 1/2 diameter 6 x 25 IWRC wire rope. Anti-two block - Wireless radio anti-two block system includes switch and receiver. Conforms to ANSI B3.5. SWING SYSTEM Swing Drive - Externally mounted single reduction worm gear swing drive; directly driven by a high-torque, low-speed hydraulic motor for smooth, controlled, operation. Swing speed is directly proportional by position of control lever. Rotation - All SC series machines are equipped with hydraulic and electric swivels that allow continuous rotation in either direction. OUTRIGGERS Front and Rear Outriggers - Fully hydraulic outriggers extend to maximum overall spread for unparalleled machine stability. All cylinders equipped with check or counterbalance valves to ensure outriggers remain in position at all times. Jack cylinders operate independently for precise leveling; bubble level located near outrigger controls. SC62,SC65 SC75,SC5,SC97 Front Spread 1' opt 19' 9-3/" Rear Spread 1'6" 1'6" MOUNTING In true Manitex tradition, these machines are clamp mounted and require no drilling or welding to the truck chassis. This system allows for greater flexibility when positioning the machine on the chassis thus allowing the installer the ability to maximize available axle capacity. Subframe - All SC series machines are equipped with a torsionally resistant, -plate, fabricated subframe that extends over the entire length of the truck chassis. The SC75, SC5 & SC97 sub-frame is fabricated with an integral outrigger base; this outrigger design further enhances the superior stability of the Manitex Skycrane. Pedestal - Clamp mounted to the subframe and truck chassis with threaded rods and chassis clamp brackets. Boom Rest - Heavy-duty fabricated boom rest secures boom in place when traveling. BASKETS AND WORK PLATFORMS Basket (standard) One-man aluminum, gravity leveled basket. Equipped with safety lanyard anchor points; full body harness and lanyard for included. Basket is secured and cushioned by manual friction brakes and shock absorbers. Basket capacity is 3 lbs. * In order to ensure continuous improvement, specifications may change without notice. CONTROL SYSTEM Outriggers Valve mounted at the rear of the truck allows visibility to all outriggers for easy set-up. Base station Mounted on the curbside of the Turret, a four spool proportional control hydraulic valve operates the basic crane functions; elevation, rotation, telescope and loadline hoist. Controls for engine ignition start, throttle advance and emergency stop are also provided. Controls for the self leveling platform and hydraulic Jib winch added when appropriate. Aerial platform Platforms are equipped with a wired remote control system. The control box is fitted with electric joysticks to operate boom elevation, telescope, and rotation; basket control and Jib winch control. Switches for engine start/stop, emergency stop button, throttle advance, auxiliary pump is standard, optional generator start switch is also included when appropriate. HYDRAULIC SYSTEMS gallon tank fitted with 1 micron high pressure and return filters, gear pump variable to GPM, 3 maximum operating pressure at high engine speed. GENERAL Electrical - Connectorized automotive style electrical system is state-of-the-art, fitted with rugged, weather proof components throughout. Design/Welding - Welding conforms to AWS D1.1. Design conforms to ANSI B3.5 (mobile cranes) and ANSI 92.2 (aerial devices). Paint - Standard Manitex blue and gray. Manuals - Operator and parts manuals depict correct machine operation, maintenance procedures and parts listings Warranty - month warranty covers parts and labor resulting from defects in material and workmanship SOUTH 13TH ST. - MILWAUKEE, WI

3 DEDUCTIONS Overhaul Weight lb Snatch Block lb 2-Manbasket SLR Platform 7 lb WEIGHTS 1 Part Line 2 Part Line WARNING Anti-two-block system, if supplied, must be in good operating condition before operating crane. Refer to the owner's manual. Keep at least three wraps of load line on the drum at all times. OVERHAUL BALL SNATCH BLOCK 3,5 lb 6, lb 3/" 6 x 25 IWRC (3.5:1 SF) 13, lb min. breaking strength OPERATING RADIUS FROM IN FEET Meets ANSI B3.5 Requirements - Do not operate crane or accessories within 1' (3,5 m) of live power lines. NOTICE: This chart is for reference only and must not be used for lifting purposes. Consult factory for other boom options. Operating Radius Feet LOAD CHART FOR CRANE APPLICATIONS ONLY MAIN BOOM LOAD RATINGS IN LBS. WITH OUTRIGGERS FULLY EXTENDED Boom Length A B C D 17. Feet 25.1 Feet.3 Feet 39.6 Feet 6. Feet 63º 7º 37º º 6, 6, 5,71 5,2,9 71º 66º 61º º º 37º 1º 6, 5,15,5,1 3,77 3,51 3,29 2,9 76º 72º 6º º º º 2º 29º 5,,51 3,9 3, 3, 2, 2,65 2,33 2,9 76º 73º 7º 67º º 53º º º,2 3,6 3,1 2,5 2,59 2,3 2, 1,3 1,65 1,51 76º 7º 71º 69º 66º º 1º º º º 7 7º º D C 2 B º A 1º 3, 2,99 2,65 2,39 2,1 1, 1,6 1, 1, 1,21 1,11 17.' BOOM º 7 7º OPERATING RADIUS FROM IN FEET 62' WORKING HEIGHT 57' FLOOR HEIGHT º The Gray Area represents a "no work" zone, do not place the basket in this area. 2 º 1º º 17.' BOOM º 6635 SOUTH 13TH ST. - MILWAUKEE, WI

4 DEDUCTIONS Overhaul Weight lb '-7" Snatch Block 2-Manbasket SLR Platform 7 lb 11'-11" lb '-3" FLATBED WEIGHTS Part Line 2 Part Line 39. WARNING 7.5 Anti-two-block system, if supplied, must be in good operating condition before operating crane. Refer to the owner's manual. Keep at least three wraps of load line on the drum at all times. OVERHAUL BALL SNATCH BLOCK WB 15. CA 29'-1" 3.9 Meets ANSI B3.5 Requirements - Do not operate crane or accessories within 1' (3,5 m) of live power lines. NOTICE: This chart is for reference only and must not be used for lifting purposes. Consult factory for other boom options. º 7 7º º 2 º 1º º 3,5 lb Operating Radius Feet LOAD CHART FOR CRANE APPLICATIONS ONLY MAIN BOOM LOAD RATINGS IN LBS. WITH OUTRIGGERS FULLY EXTENDED Boom Length A B C D 19. Feet 27. Feet 3.3 Feet 1.5 Feet. Feet 66º 59º º º 23º 6, 6, 5,,9,6, 6, lb 73º 6º º 59º º 2º 26º 5,91 5,,1 3,97 3,6 3,37 3, 2,3 77º 73º 7º 66º 62º º 3/" 6 x 25 IWRC (3.5:1 SF) 13, lb min. breaking strength D C 5,,3 3, 3,3 3,5 2,79 2,5 2,25 2, 1,3 77º 7º 71º 6º 62º º º,17 3, 3,13 2,79 2,53 2, 2, 1,77 1, 1, 1,33 77º 7 72º 7º 67º 62º º 3º º 26º 9º B A 19.' BOOM The Gray Area represents a "no work" zone, do not place the basket in this area. OPERATING RADIUS FROM IN FEET º 7 7º 65' WORKING HEIGHT ' FLOOR HEIGHT º 6 2 º 1º º 3,3 2,9 2,61 2,35 2,1 1, 1,59 1, 1, 1,17 1, ' BOOM OPERATING RADIUS FROM IN FEET 6635 SOUTH 13TH ST. - MILWAUKEE, WI

5 DEDUCTIONS Overhaul Weight lb Snatch Block lb 2-Manbasket SLR Platform 7 lb 13'-" '- " WEIGHTS 1 Part Line 2 Part Line WARNING Anti-two-block system, if supplied, must be in good operating condition before operating crane. Refer to the owner's manual. Keep at least three wraps of load line on the drum at all times. OVERHAUL BALL SNATCH BLOCK WB 19'-". CA '-3" FLATBED '-7" 3,5 lb 6, lb 3/" 6 x 25 IWRC (3.5:1 SF) 13, lb min. breaking strength º The Gray Area represents a "no work" zone, do not place the basket in this area. Meets ANSI B3.5 Requirements - Do not operate crane or accessories within 1' (3,5 m) of live power lines. NOTICE: This chart is for reference only and must not be used for lifting purposes. Consult factory for other boom options. Operating Radius Feet LOAD CHART FOR CRANE APPLICATIONS ONLY MAIN BOOM LOAD RATINGS IN LBS. WITH OUTRIGGERS FULLY EXTENDED Boom Length A B C D 22. Feet 31.5 Feet.6 Feet 9.7 Feet 5. Feet 71º 53º 6º 39º 29º 5,5 5, 5,3 5,19 5,,9,7 77º 73º 69º 61º 57º º 2º 29º,97,5,75,6,9,,1 3,7 3,3 º 77º 7º 71º 6º 62º º 39º 29º 11º,5,35,,5 3,9 3,75 3,5 3,21 2, 2, 1,9 1,6 º 7º 7 73º 7º 6º 63º 57º º 3º 29º 17º 3,75 3, 3,9 3,3 3, 3, 2,91 2,67 2,35 2, 1,71 1, 1,25 º 7º 76º 7º 72º 6º º 59º 9º º 37º º OPERATING RADIUS FROM IN FEET º 75' WORKING HEIGHT 7' FLOOR HEIGHT OPERATING RADIUS FROM IN FEET 72 6 º 7 7º º D 2 º C B A 22.' BOOM º 2 º 1º º 1º º 3, 2,93 2,7 2,1 2,75 2,6 2,5 2,35 2,7 1, 1,5 1,29 1, 22.' BOOM 6635 SOUTH 13TH ST. - MILWAUKEE, WI

6 DEDUCTIONS Overhaul Weight See Manufacturer Nameplate Snatch Block See Manufacturer Nameplate 2-Manbasket SLR Platform 7 lb '-5" 19'-" 13'-2" OAH '-3" Flatbed '-5" OAL 25. WB.9 CA AF WEIGHTS 1 Part Line 2 Part Line 3 Part Line Part Line WARNING Anti-two-block system, if supplied, must be in good operating condition before operating crane. Refer to the owner's manual. Keep at least three wraps of load line on the drum at all times. OVERHAUL BALL SINGLE SHEAVE BLOCK SINGLE SHEAVE BLOCK DOUBLE SHEAVE BLOCK 5, lb 6, lb 11, lb, lb 17, lb 1, lb 23, lb, lb 1/2" ROT RESISTANT (5:1 SF) 29, min Breaking Strength 1/2" 6x25 IWRC (3.5:1 SF) 23, min Breaking Strength º OPERATING RADIUS FROM IN FEET The Gray Area represents a "no work" zone, do not place the basket in this area. Meets ANSI B3.5 Requirements - Do not operate crane or accessories within 1' (3,5 m) of live power lines. NOTICE: This chart is for reference only and must not be used for lifting purposes. Consult factory for other boom options. Operating Radius Feet LOAD CHART FOR CRANE APPLICATIONS ONLY MAIN BOOM LOAD RATINGS IN LBS. WITH OUTRIGGERS FULLY EXTENDED Boom Length A B C D 26.5 Feet Feet 5 Feet Feet 7 Feet 7º, 71º 17,3 7º 15, 67º 1,3 7 13,23 7º,7 62º, 72º 11,37 76º 1,9 79º 1,57 57º 11, 69º 9,99 73º 9, 77º 9, 79º,9 51º 9, 66º,91 71º, 7,1 7º 7,9,91 63º, 69º 7, 73º 7,29 76º 7, 3º, 59º 7, 66º 6,9 71º 6, 7º 6,37 1º 6,1 º 6,1 61º 5,1 67º 5,53 71º 5,31 º 5,3 5, 62º,73 67º,,5 9º,35, º 3,9 22º 3,73 3º 3, 53º 3,6 3, 3, º 3, º 3, 26º 2, 3º 2,3 º 2,7 1º 2, º 2,9 7º 2, 29º 2,15 2º 2,1 19º 1,73 37º 1,9 31º 1,6 23º 1, 9º 9 7 7º º 7 7º OPERATING RADIUS FROM IN FEET º 2 º 1º º D C B A 5' WORKING HEIGHT ' FLOOR HEIGHT º 2 º BOOM 1º 6 72 º D C B A 26.5 BOOM 6635 SOUTH 13TH ST. - MILWAUKEE, WI

7 DEDUCTIONS Overhaul Weight lb Snatch Block lb 2-Manbasket SLR Platform 7 lb 13'-" '-" WEIGHTS 1 Part Line 2 Part Line, lb LOAD CHART FOR CRANE APPLICATIONS ONLY Operating Radius Feet MAIN BOOM LOAD RATINGS IN LBS. WITH OUTRIGGERS FULLY EXTENDED Boom Length A B C D.1 Feet 39 Feet 53 Feet 67 Feet 1.1 Feet 73º 6º 63º 57º 51º º 37º 9º 6, 6, 6, 5,69 5,3 5,7,7,15 6, lb º 77º 7º 71º 6º º 61º 6º 37º º 6, 6, 5, 5,25,99,7,5 3,9 3,23 2, 2, 3º 1º 7º 76º 7º 72º 69º º 9º 2º 27º 13º 5,5 5,27 5,5,,,37,15 3,7 3,25 2, 2,35 1,9 1,5 1, 7 WARNING Anti-two-block system, if supplied, must be in good operating condition before operating crane. Refer to the owner's manual. Keep at least three wraps of load line on the drum at all times. OVERHAUL BALL SNATCH BLOCK º ' WORKING HEIGHT 92' FLOOR HEIGHT The Gray Area represents a "no work" zone, do not place the basket in this area. 1'-11". CA 25. WB 3'-11" '-3" FLATBED The Gray Area represents a "no work" zone, do not place the boom or load in this area. Meets ANSI B3.5 Requirements - Do not operate crane or accessories within 1' (3,5 m) of live power lines. NOTICE: This chart is for reference only and must not be used for lifting purposes. Consult factory for other boom options º 1º º 7º 76º 7º 71º 67º 63º 59º 51º 6º 1º º,, 3,9 3, 3,6 3, 3, 2, 2, 2, 1, 1,59 1, º 2º 1º 79º 77º 7 72º 69º 66º 63º 59º º º º º 3, 3,1 3,1 2,91 2, 2,63 2, 2,25 2, 1,7 1, 1,35 1,7 6 OPERATING RADIUS FROM IN FEET OPERATING RADIUS FROM IN FEET 7º º 7 7º º D C º B 2 º A 2 1º º.1' BOOM.1' BOOM º 1º º 1 1/2" 6 x 25 IWRC (3.5:1 SF) 1, lb min. breaking strength 6635 SOUTH 13TH ST. - MILWAUKEE, WI

8 Models: SC62, SC65, SC75, SC97 CHASSIS DATA Chassis RBM (per rail) Front Axle Gross Weight Rating Rear Axle Gross Weight Rating Minimum Truck Axle Weight - Front* Minimum Truck Axle Weight - Rear* Cab-to-Axle Distance (typ) Cab-to-End-of-Frame Distance (typ) Wheelbase (typ) OPTIONAL EQUIPMENT Work Platform Gravity Leveled 3 X 6 work platform with 2 high rails and safety lanyard anchor points. Each platform is equipped with a full body harness and lanyard. Basket is secured and cushioned by manual friction brakes and shock absorbers. Platform capacity is 3 lbs. SLR Work Platform Self Leveling 3 X 5 work platform with 2 high rails and safety lanyard anchor points. Each platform is equipped with a full body harness and lanyard. The self leveling system consists of one master cylinder mounted to the boom base that interfaces with the two slave cylinders at the platform mounting bracket that together form a hydraulic closeloop system. Platform capacity is lbs. Jib with hydraulic Winch in basket. Winch capacity is lbs. Low oil level shutdown Two part snatch block Welder/Generator ( amps, 5 KW) Portable remote control module Special paint colors (customer specified) Model: SC5 SC62 SC65 SC75 SC5 SC97 1,, in-lbs 1,, in-lbs 1,, in-lbs 1,, in-lbs 1,, in-lbs, lbs, lbs, lbs, lbs, lbs 21, lbs " 5" 5" 21, lbs 65 1 *Minimum chassis weight is required to meet 5% stability requirements. Chassis data is general - not for engineering. Some dimensions change depending on truck selection and machine options ordered. 15" 5" 217" 21, lbs " 276" 25" 3, lbs " 276" 25" OPTIONAL EQUIPMENT Special Body Rigging Front bulkhead at boom rest Over cab walkway/bulkhead Built in long Lamp Tray (in sub-frame) Wood or Steel Beds; 1, Full body skirting; steel or aluminum Rear step and bumper; steel or aluminum Lamp/Tool Boxes Steel or Aluminum Tool 1-1/2', 2', 3', ', 5' Steel or Aluminum Lamp 3 H x W x 1 Lg. H x W x Lg. 3, lbs " 276" 25" Remote Services in Basket And/Or Truck Body 11 VAC with GFI Weld Leads Compressed Air (from chassis) Water Pressure Washer Hydraulic Tool Circuit (6 GPM at basket) Oxygen/Acetylene Service 6635 SOUTH 13TH ST. - MILWAUKEE, WI

9 6635 SOUTH 13TH ST. - MILWAUKEE, WI

10 Manitex 3 South Austin Avenue Georgetown, TX, USA Telephone Facsimile UPTime is the Manitex commitment to complete support of thousands of units working every day. Includes -7-5 parts shipments. Utilizes the efficiency of UPNET online parts order system. Relies on Manitex's UPTrak support tracking system for performance analysis and resource allocation. Features REMan, Manitex's cost effective rebuild/exchange program. Provides expert service technicians for troubleshooting and site visits. Mandates training; at our facility and yours. It includes coordinated support from all component suppliers. Involves every Manitex team member in the support of every Manitex customer. What does UPTime mean to Manitex customers? UPTime means reliability. UPTime means utilization. UPTime means profitability. MTX-SC-Guide-EN-V SOUTH 13TH ST. - MILWAUKEE, WI

11 6635 SOUTH 13TH ST. - MILWAUKEE, WI

12 6635 SOUTH 13TH ST. - MILWAUKEE, WI

13 6635 SOUTH 13TH ST. - MILWAUKEE, WI

14 6635 SOUTH 13TH ST. - MILWAUKEE, WI

15 6635 SOUTH 13TH ST. - MILWAUKEE, WI

SkyCrane. SC series. product guide. features. Aerial Lifts and Cranes

SkyCrane. SC series. product guide. features. Aerial Lifts and Cranes features Skyrane S series erial Lifts and ranes Working Heights to 97' ual purpose machine; aerial platform and crane Multiple tool and lamp box options Extra long lamp box option in sub-frame Easy ground