ONSITE GLAZING EQUIPMENT

Transcription

1 ONSITE GLAZING EQUIPMENT Glassmax Wiga Glassboy Glass Crawler Telecrane Telelifter

2 GLASSMAX 250 Load capacity 250 kg Lifting height max m - Chassis width: 80 cm Chassis length: 1.45 m - Mast height: 1.89 m Transporting width: 80 cm Base weight: 125 kg (without counter weight) Transporting length: 76 cm Product Code :-KSGM25047

3 GLASSMAX 500 Load capacity 500 kg Lifting height max. 4.9 m - Chassis width: 76 cm Chassis length: 1.61 m - Mast height: 1.97 m Transporting width: 80 cm - Base weight: 205 kg (without counter weight) Product Code :- KSGM50049

4 WIGA 2002 Assembles in 2 minutes Requires no onsite power Hand winch operated Capacity max: 120kg Glass max: 800mm x 3300mm Lifting height: 4m Unit weight: 110kg Product Code :- KSWIGA2002

5 WIGA 2002-M Assembles in 2 minutes Electric connection 230V/50Hz Capacity max: 200kg Glass max: 900mm x 3300mm Lifting height: 4m Unit weight: 135kg Product Code :- KSWIGA2002M

6 HV-600 VACUUM LIFTER Manual hand pump with battery back warning device. Main vacuum pad 450mm square with a smaller bottom pad of 70mm x 450mm. Narrow suction pad horizontal:- 150 kg Large suction pad horizontal:- 600 kg Large suction pad vertical:- 300 kg Product Code :- KSHV600

7 1.1M Site Trolley 1.1M x 1.1M x 6mm collapsible site trolley. New Zealand designed and built. Prefect addition for any site glazing van/ truck. This site trolley feature s Metalcraft s sliding safety arms to keep your product and staff safe. This is fully collapsible to allow for easy transportation to and from site. Product Code : SITE

8 TILT TROLLEY GC-300 Tilt from horizontal to vertical with ease. Easily to maneuver ad use as an on-site work bench for safely moving glass around. Product Code :- KSGC300

9 GLASSBOY GK kg floor hoist designed for horizontal use. With hand pump this is a compact and versatile floor hoist. Through the light running wheels you can transport glass everywhere. Adjustment is through the manually operated hydraulic pump. Product Code :- KSGBGK300

10 GLASSBOY BF kg hoist for most on-site conditions. New Zealand Made with German components. Comes with a hand pump is a compact and versatile off-road hoist. 2650mm Max hook height with boom extended Easy to transport glass on most building sites. With the pneumatic tyres and adjustable boom it allows you to install up to 330kg glass. Product Code :- GBBF350

11 GLASSBOY kg floor hoist. When you need to handle those heavy sheets. With a hand pump is a compact and versatile floor hoist. It folds up into a very compact unit which allows you to transport it in your glazing transportation or from site. Product Code :- KSGB500

12 GLASSBOY 2500 The largest hand pump operated compact floor hoist for up to 2500Kgs of glass. Load capacity = 800kg kg Lifting height = max. 4.5 m Chassis width: 1000 mm Chassis length: 2300 m Boom max length: 3.5 m Product Code :- KSGB2500

13 GLASS CRAWLER 500 Load capacity 500 kg Lifting height max. 3.1m Chassis width: 65 cm Chassis length: 2.14 m Base weight: 380 kg (without counter weights) Motor Power: 4KW / 5.5PS Product Code :- KSGC500

14 GLASS CRAWLER RD-6 Load capacity 500 kg Lifting height max. 4.2m Chassis width: 80 cm Chassis length: 1.12 m Base weight: 450 kg (without counter weights) Motor Power: Honda GX390 / 13PS Product Code :- KSGCRD6

15 TELECRANE JIB angle Angle of telescopic arm Rope speed 0 45 m/min Drive Honda / option diesel Boom rotation 360 endless Ground support width 4.9 m Ground suport length 4.9 m Max. carrying capacity 1200 kg Transport width 2.10 m Transport height 2.40 m Transport length including tow bar 9.10 m Axle load 3.5 tons Total weight with basic equipment 3490 kg Product Code :- KSTELECRANE

16 TELELIFTER Deliver to site on the back of your glazing truck and erect using internal winching system. 360 rotating jib 5.7 metres long. The electrical requirements are only 230 Volt. Max vertical height, 19M. Max load with jib at 1.5M 800kg Max load with jib at 5M 200kg. Nett complete weight, 3490kg Complete trailer length 7.2M Product Code :- KSTELELIFTER

17 WE ALSO OFFER A FULL 3D CAD DESIGN PROCESS TO HELP YOU GET THE RIGHT PRODUCTS. OUR OTHER PRODUCTS HEAVY GLASS TRANSPORTATION GLASS STORAGE SYSTEMS GLASS CUTTING & PROCESSING TABLES GLASS ONSITE HANDLING PRODUCTS CRANES & GLASS LIFTING GLASS PRODUCT DISPLAY SYSTEMS METALCRAFT ENGINEERING CO LTD 500a WAIRAKEI ROAD, CHRISTCHURCH, PO BOX 5134, PAPANUI, NEW ZEALAND Free call within NZ (ph) (fax) metalcraft@metalcraft.co.nz