RESIDENTIAL GRADE
|
|
- Annice Higgins
- 5 years ago
- Views:
Transcription
1 1 RESIDENTIAL GRADE
2 LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Bulb 4-13/16 (123mm) 3-3/4 (95mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W The LEDH-310ICA is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-310ICA offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. Housing Galvanized steel housing painted white 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/4 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Recommended Dimmer Lutron : D i v a(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Mounting Frame Galvanized steel construction. 8 L X 5-1/2 W Transformer 120V magnetic transformer steps line voltage down to 12V operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max. (Not Included: see "Cree COB LED at end of section for Specs and ordering information) Bar Hangers Maximum extension of 24 allows for extra distance between joists. Housing can be positioned at any point within 24 joist span. Snap-off segments allow tool-free shortening for 12 joists. Bar hangers may be repositioned 90 degrees. Integral T-bar clips snaps onto T-bars and no additional clips are required. Optional Quick Connect Push-in Wire Connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing cetlus Damp Location. 02/02/17
3 LEDH-310ICAR 3.5 Low Voltage LED IC Rated Remodel Recessed Housing MR16 LED Bulb 14-5/16 (363mm) 4-13/16 (123mm) 3-3/5 (92mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W The LEDH-310ICAR is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-310ICAR offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. Housing Galvanized steel housing painted white 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/2 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Recommended Dimmer Lutron : D i v a(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Transformer 120V magnetic transformer steps line voltage down to 12V operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max. (Not Included: see "Cree COB LED at end of section for Specs and ordering information) Remoled Clips 4 remodel clips secure housing and accommodates 1/2 and 5/8 ceiling materials. Optional Quick Connect Push-in Wire Connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing cetlus Damp Location.
4 Designs/Trims For LEDH-310ICA, LEDH-310ICAR LT-350 Shower Frosted Flat Lens Die-Cast Construction O.D : 4-5/16" MR16 LED Bulb LT-350WH LT-350CH LT-350SN LT-351 Shower Convex Shape Lens Die-Cast Construction O.D : 4-5/16" LT-351WH LT-351CH LT-351MO LT-352 Tapered Glass Diffuser Die-Cast Construction O.D : 4-5/16" LT-352WH LT-352WH-B LT-352BK LT-354 Adjustable Reflector Die-Cast Construction O.D : 4-5/16" LT-354CL LT-354CL-CH LT-354WH LT-355 Adjustable Baffle Die-Cast Construction O.D : 4-5/16" LT-355WH LT-355BK LT-355BK-CH LT-358 Pin Spot w/ Baffle Die-Cast Construction O.D : 4-5/16" LT-358BK LT-358BK-SN LT-358BK-MO LT-359 Pin Spot w/reflector Die-Cast Construction O.D : 4-5/16" LT-359CL LT-359BK-SN LT-359BK-MO LT-360 Slotted Wall Wash Die-Cast Construction O.D : 4-5/16" LT-360WH LT-360SN LT-360MO
5 Designs/Trims For LEDH-310ICA, LEDH-310ICAR LT-361 Adjustable Wall Wash w/baffle Die-Cast Construction O.D : 4-5/16" MR16 LED Bulb LT-361WH LT-361PB LT-361MO LT-362 Dropped Clear Etched Lens Die-Cast Construction O.D : 4-5/16" LT-362WH LT-362BK LT-362SN LT-364 Gimbal w/baffle Die-Cast Construction O.D : 4-5/16" LT-364WH LT-364BK-SN LT-364BK-MO Ordering Information Model LEDH-310ICA = 3.5, IC New Construction LEDH-310ICAR = 3.5, IC Remodel Example : LEDH-310ICA277-Q Voltage Blank = 120V to 12V 277 = 277V to 12V -Options -E = Electronic Transformer -Q = Quick Wire Connectors Design / Trim* LT-350WH = White LT-350CH = Chrome LT-350SN = Satin Nickel LT-351WH = White LT-351CH = Chrome LT-351MO = Mocha LT-352WH = White LT-352WH-B = White-Blue LT-352BK = Black LT-354CL = Clear LT-354CL-CH = Clear-Chrome LT-354WH = White LT-350WH LT-355WH = White LT-355BK = Black LT-355BK-CH = Black-Chrome LT-358BK = Black LT-358BK-SN = Black-Satin Nickel LT-358BK-MO = Black-Mocha LT-359CL = Clear LT-359BK-SN = Black-Satin Nickel LT-359BK-MO = Black-Mocha LT-360WH = White LT-360SN = Satin Nickel LT-360MO = Mocha LT-361WH = White LT-361PB = Polished Brass LT-361MO = Mocha LT-362WH = White LT-362BK = Black LT-362SN = Satin Nickel LT-364WH = White LT-364BK-SN = Black-Satin Nickel LT-364BK-MO = Black-Mocha * Consult factory for other Color Temperatures and Finishes
6 LEDH-410ICA 4 Low Voltage LED IC Rated New Construction Recessed Housing 13-1/4 will extand to 25 MR16 LED Bulb 5-1/2 (140mm) 4-5/16 (109mm) Ceiling Cut-out : 4-3/8 Lamp, Max, Watt. : 12.2W The LEDH-410ICA is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-410ICA offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. Housing Single wall aluminum housing. 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/4 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Recommended Dimmer Lutron : D i v a(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Mounting Frame Galvanized steel construction. 8 L X 5-1/2 W Transformer 120V magnetic transformer steps line voltage down to 12V operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max. (Not Included: see "Cree COB LED at end of section for Specs and ordering information) Bar Hangers Maximum extension of 24 allows for extra distance between joists. Housing can be positioned at any point within 24 joist span. Snap-off segments allow tool-free shortening for 12 joists. Bar hangers may be repositioned 90 degrees. Integral T-bar clips snaps onto T-bars and no additional clips are required. Optional Quick Connect Push-in Wire Connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing cetlus Damp Location.
7 LEDH-410ICAR 4 Low Voltage LED IC Rated Remodel Recessed Housing MR16 LED Bulb 14-3/8 (365.2mm) 5-5/8 (142.3mm) 4-1/8 (105mm) Ceiling Cut-out : 4-3/8 Lamp, Max, Watt. : 12.2W The LEDH-410ICAR is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-410ICAR offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. Housing Single wall aluminum housing. 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/2 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Recommended Dimmer Lutron : D i v a(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Transformer 120V magnetic transformer steps line voltage down to 12V operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max. (Not Included: see "Cree COB LED at end of section for Specs and ordering information) Remoled Clips 3 remodel clips secure housing and accommodates 1/2 and 5/8 ceiling materials. Optional Quick Connect Push-in Wire Connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing cetlus Damp Location.
8 Designs/Trims For LEDH-410ICA, LEDH-410ICAR LT-42 Adjustable Baffle White Metal Trim Ring O.D : 4-7/8" MR16 LED Bulb LT-42-WH LT-42-BK LT-42-CH LT-44 Adjustable Reflector White Metal Trim Ring O.D : 4-7/8" LT-44-CL LT-44-GD LT-44BK-MO LT-43 Eyeball White Metal Trim Ring O.D : 4-7/8" LT-43WH LT-43PB LT-43MO LT-47 Retractable Wall Wash White Metal Trim Ring O.D : 4-7/8" LT-47WH LT-47CH LT-47MO LT-48 Adjustable Wall Wash White Metal Trim Ring O.D : 4-7/8" LT-48WH LT-48SN LT-48AN LT-49 Pin Hole w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-49WH LT-49SN LT-49MO LT-410 Slotted Wall Wash w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-410WH LT-410BK LT-410BK-MO LT-411 Gimbal White Metal Trim Ring O.D : 4-7/8" LT-411WH LT-411SN LT-411MO
9 Designs/Trims For LEDH-410ICA, LEDH-410ICAR LT-416 Eyeball w/ Baffle White Metal Trim Ring O.D : 4-7/8" MR16 LED Bulb LT-416WH LT-416BK LT-416BK-PB LT-418 Pin Spot White Metal Trim Ring O.D : 4-7/8" LT-418WH LT-418BK LT-418BK-SN LT-46 Wall Wash White Metal Trim Ring O.D : 4-7/8" LT-46WH LT-417 Wall Wash w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-417WH LT-417BK Ordering Information Model Voltage -Options Design / Trim* LEDH-410ICA = 4, IC New Construction LEDH-410ICAR = 4, IC Remodel Example : LEDH-410ICA-E-Q Blank = 120V to 12V 277 = 277V to 12V -E = Electronic Transformer -Q = Quick Wire Connectors LT-42WH = White LT-42BK = Black LT-42CH = Chrome LT-43WH = White LT-43PB = Polished Brass LT-43MO = Mocha LT-44CL = Clear LT-44GD = Gold LT-44BK-MO = Black-Mocha LT-47WH = White LT-47CH = Chrome LT-47MO = Mocha LT-42WH LT-48WH = White LT-48SN = Satin Nickel LT-48AN = Antique Nickel LT-49WH = White LT-49SN = Satin Nickel LT-49MO = Mocha LT-410WH = White LT-410BK = Black LT-410BK-MO = Black-Mocha LT-411WH = White LT-411SN = Satin Nickel LT-411MO = Mocha LT-416WH = White LT-416BK = Black LT-416BK-PB = Black-Polished Brass LT-418WH = White LT-418BK = Black LT-418BK-SN = Black-Satin Nickel LT-46WH = White LT-417WH = White LT-417BK = Black * Consult factory for other Color Temperatures and Finishes
10 CREE COB LED Designed as a direct retrofit to most MR16 lighting fixtures 6W LED lamp, for replacement of 35-50W MR16 lamps High efficacy (~67-70lm/W) High quality light with a color rendering index of 80CRI Suitable for use in totally enclosed luminaires Product Offering Lamp Energy Used Brightness CCT Beam Angles E9564F-M W 400 lm 2700K 25 E9564F-M W 400 lm 2700K 40 E9564F-M W 420 lm 3000K 25 E9564F-M W 420 lm 3000K 40 Features and Benefits 6W GU5.3 base LED lamp * Available beam angles : 25 and 40 Input voltage : 12VAC or DC * Available in two different color temperatures: 2700K warm 3000K warm white Rated lifetime : 40,000 hours UV,NIR and Mercury free 3years Lum-Tech Lighting warranty * For different color temperatures and beam angles, contact factory for availability and order quantities Specifications Average lifetime Starting time Switching cycles (30s on, 30s off) Warm up time Working Conditions Tc temperature max Mercury 40,000 hr 20 ms 1,000,000 None (Instant On) -20~ mg LED Brand Length Diameter Weight Input voltage Nominal current (12VAC/ 60HZ) Power Power factor CREE 46.5mm 50mm 52g 120VAC 1.0A max 6W >0.75
11 LEDH-3110ICA 120VAC LED DoB 3.5 IC/AIR-TIGHT Recessed down light for new construction LEDH VAC LED DoB 3.5 NON-IC Recessed down light for new construction 3.5 LED 8 (203mm) 5-1/2 (140mm) 13-1/4" Will Expand To 25" 4-3/8 (110mm) Height : 5-1/2 Ceiling Cut-out : 3-7/8 The LEDH-3110ICA and LEDH-3110 are IC and Non-IC type 3.5 aperture down lights. The LED DoB Module is designed to maintain 70% average lumen output at 50,000hr or 5 years life. Non-IC rated housing must be kept 3 away from insulation. IC rated housing is suitable for direct contact with insulation. Equivalent light output to a 35W MR16 lamp while using only 9 watts of power. Suitable for Wet Location. Housing Galvanized steel housing. Housing is adjustable for thickness up to 1-1/4 Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Bar Hangers 24 Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24 joist spacing. Score lines allow easy bend & snap-off shortening for 12 joist spacing. Trims Standard offerings with baffle trims in painted white or black plus haze clear reflectors. See Trims spec sheet for full offerings and ordering information. Optics Lens: Fine, textured surface of tempered glass provides high lumen transmission and diffusion for even illumination. LED Engine Aluminum Heat Sink computer designed in conjunction with an aluminum clad PC board for superior thermal management. Lumen Maintenance: L70, 70% lumens of initial 50,000 hours. Electrical Connection: LED DoB module is replaceable via an on-board quick disconnect terminal (No tools required). Electrical Connection; Provided with quick connector between LED module and housing for easy plug and play installation. 120VAC Direct DoB circuit on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 9 W Lumen (+/-5%) 555 lm Efficacy (LPW) 61.7 lm/w Beam Angle 43.7 CRI (Typical) 80 CCT (Color +/-5%) 2700K, 3000K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 02/02/17
12 LEDH-3110ICAR 120VAC LED DoB 3.5 LED IC/AIR-TIGHT Recessed down light for Remodeling LEDH-3110R 120VAC LED DoB 3.5 LED NON-IC Recessed down light for Remodeling 3.5 LED 5-5/16 (138.8mm) 3-7/8 (98.5mm) 16-3/4 (423mm) Height : 5-5/16 Ceiling Cut-out : 3-7/8 LEDH-3110ICAR and LEDH-3110R are IC and Non-IC type 3.5 aperture down lights. The LED DoB 120VAC Direct Module is 9W and is designed to maintain 70% average lumen output at 50,000hr or 5 years life. Non-IC rated housing must be kept 3 away from insulation. IC rated housings are suitable for direct contact with insulation. Equivalent light output to a 35W MR16 lamp while only using 9 watts of power. Suitable for Wet Locations. Housing Galvanized steel housing painted Black. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Remodel Clips 3 remodel clips secure housing and accommodates 1/2" and 5/8" thick ceilings. Trims Standard offerings with baffle trims in painted white or black plus haze clear reflectors. See Trims spec sheet for full offerings and ordering information. Optics Glass Lens: Fine, textured surface of tempered glass provides high lumen transmission and diffusion for even illumination. LED Engine Aluminum Heat Sink computer designed in conjunction with an aluminum clad PC board for superior thermal management. Lumen Maintenance: L70, 70% lumens of initial 50,000 hours. Electrical Connection: LED DoB module is replaceable via an on-board quick disconnect terminal (No tools required). Electrical Connection; Provided with quick connector between LED module and housing for easy plug and play installation. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 9 W Lumen (+/-5%) 555 lm Efficacy (LPW) 61.7 lm/w Beam Angle 43.7 CRI (Typical) 80 CCT (Color +/-5%) 2700K, 3000K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 02/02/17
13 LEDT-C34 Reflector -HC = Haze Clear -PR = Pewter -CP = Champagne -WH = White Painted O.D : 4-5/16" 3.5 LED LEDT-C34-WH-WH LEDT-C32 Baffle -WH = White -BK = Black O.D : 4-5/16" LEDT-C32-WH-WH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 1.6 ft 47.1 fc 3.2 ft 21.0 fc 4.8 ft 11.8 fc 6.4 ft 7.5 fc 8.0 ft 5.2 fc 9.6 ft Beam Spread: 43.7 [LEDH-3110ICA-840DOB+LEDT-C34-WH] Ordering Information Model -Watts -CRI Color Temp.* Driver Trim -Finishes* -Trim Ring Finishes* LEDH-3110 = 3.5 LED NON-IC LEDH-3110ICA = 3.5 LED IC LEDH-3110R = 3.5 LED NON-IC LEDH-3110ICAR = 3.5 LED IC -9 = 9W -8 = 80 CRI 27 = 2700K 30 = 3000K 40 = 4000K DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) LEDT-C34 = Reflector LEDT-C32 = Baffle Reflector: -HC = Haze Clear -PR = Pewter -CP = Champane -WH = White Painted Baffle: -WH = White -BK = Black WH = White BK = Black SN = Satin Nickel AN = Antique Nickel AC = Antique Copper MO = Mocha CA = Cappuccino CH = Chrome UN = Natural Steel PB = Polished Brass Example : LEDH-3110ICA-9-830DOB LEDT-C34-HC-WH * Consult factory for other Color Temperatures and Finishes
14 LEDH-NCR4ICA 120VAC LED DoB 4 Recessed Housing Down Light with Baffle Trim for IC type New Construction Applications 4 LED 7-3/8 (187mm) 3-1/2 (89mm) 7-1/8 (181mm) 4-15/16 (126mm) Ceiling Cut-out : 4-1/4 The LEDH-NCR4ICA down light is a 4, IC rated luminaire. The LED DoB 120VAC Direct engine has a 10W LED Module with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This easy to install fixture is designed for use in New Construction applications with insulated ceilings. Suitable for Wet Locations. LED Module & Trim Durable, one-piece die cast aluminum heat sink with integrated trim. Module construction includes LED, heat sink, lens and baffle trim. White painted finish standard. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. Sealed for Wet Locations and is ideal for shower rooms. Mounting Provided with a plaster frame (7-1/8 x 7-1/8 ) for new construction. HB-24 bar hangers are available as an accessory for new construction. Electrical Connection; J-box: - Installed on the top of fixture with (5)1/2 knockout. - Listed for through branch circuit wiring (max. 4, 12 AWG, 90 C rated wire). - Ground wire provided. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Accessories HB-24 hanger bars for use with housing plate for new construction applications Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 10 W Lumen (+/-5%) 625 lm Efficacy (LPW) 62.5 lm/w Beam Angle 90.5 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
15 4 LED PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width 80.8 fc 4.0 ft 20.2 fc 8.1 ft 9.0 fc 12.1 ft 5.1 fc 16.1 ft 3.2 fc 20.2 ft 2.2 fc 24.2 ft Beam Spread: 90.5 [LEDH-NCR4ICA(R)-830DOB] Ordering Information Model -CRI Color Temp.* Finish* Driver Accessories LEDH-NCR4ICA= 4, 10W Recessed IC, New Construction LEDH-NCR4ICAR = 4, 10W Recessed IC, Remodeling -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) HB-24 = 24 adjustable Hanger Bars (2) LEDH-NCR4ICA only Example : LEDH-NCR4ICA-830DOB * Consult factory for other Color Temperatures and Finishes
16 LEDH-NCR4ICAR 120VAC LED DoB 4 Recessed Housing with Baffle Trim for IC type Remodeling Applications 4 LED 4-15/16 (126mm) 3-1/2 (89mm) 4-15/16 (126mm) 4-15/16 (126mm) Ceiling Cut-out : 4-3/8 The LEDH-NCR4ICAR down light is a 4, IC rated luminaire. The LED DoB 120VAC Direct engine has a 10W LED Module with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This easy to install fixture is designed for remodeling pplications with insulated ceilings. Thermally protected, Suitable for Wet Locations. LED Module & Trim Durable, one-piece diecast aluminum heat sink with integrated trim. Module construction includes LED, heat sink, lens and baffle trim. (2) mounting clips on trim module for remodeling jobs. White painted finish standard. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. Sealed for Wet Locations and is ideal for shower rooms. Electrical Connection; J-box: - Installed on the top of fixture with (5)3/4 knockout. - Listed for through branch circuit wiring (max. 8, 12 AWG, 90 C wire). - Ground wire provided. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 10 W Lumen (+/-5%) 625 lm Efficacy (LPW) 62.5 lm/w Beam Angle 90.5 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
17 4 LED PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width 80.8 fc 4.0 ft 20.2 fc 8.1 ft 9.0 fc 12.1 ft 5.1 fc 16.1 ft 3.2 fc 20.2 ft 2.2 fc 24.2 ft Beam Spread: 90.5 [LEDH-NCR4ICA(R)-830DOB] Ordering Information Model -CRI Color Temp.* Finish* Driver Accessories LEDH-NCR4ICA= 4, 10W Recessed IC, New Construction LEDH-NCR4ICAR = 4, 10W Recessed IC, Remodeling -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) HB-24 = 24 adjustable Hanger Bars (2) LEDH-NCR4ICA only Example : LEDH-NCR4ICA-830DOB * Consult factory for other Color Temperatures and Finishes
18 LEDH-RT4ICA 120VAC LED DoB 4 IC/AIR-TIGHT Recessed Down Light for New Construction 4 LED 6-3/8 (162mm) 5-9/16 (141mm) The LEDH-RT4ICA housing is designed for use with a separate LED Trim Module that is integrated with heat sink and is available with three trim styles. This New Construction fixture offers easy and fast installation using a disconnect device and is held securely in the housing with two friction blade brackets. The LED DoB 120VAC Direct module is available in a 11W engine with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This luminaire is listed as IC and is suitable for direct contact with insulation. Suitable for Damp Locations. Housing Single wall aluminum housing gasketed for IC/Air-Tight ratings in insulated ceilings. Housing can be adjusted for ceiling thicknesses up to 1-1/4 LED Module & Trim Two-piece interchangeable trim to reflector or baffle. Module construction includes LED, heat sink, lens, and trim. White paint finish standard. Junction Box Listed for through branch circuit wiring (Max.8, 12 AWG, 90 C wire). (5) 1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Provided with listed quick connectors for easy wiring. Bar Hangers 24 Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24 joist spacing. Score lines allow easy bend & snap-off shortening for 12 joist spacing. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. LED Engine Aluminum Heat Sink computer designed in conjunction with an aluminum clad PC board for superior thermal management. Lumen Maintenance: L70, 70% lumens of initial 50,000 hours. Electrical Connection; Provided with quick connector between LED module and housing for easy plug and play installation. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing ENERGY STAR California Title /8 (207mm) Input Voltage Wattage (+/-5%) Lumen (+/-5%) Efficacy (LPW) Beam Angle CRI (Typical) CCT (Color +/-5%) Dimming LED Module Environment 4-1/4 (109mm) 4-1/8 (105mm) Height : 5-9/16 Housing Aperture : 4-1/4 Ceiling Cut-out : 4-3/8 SPECIFICATION 120VAC 11 W 750lm 68 lm/w K, 3000K, 4000K Triac 5 yr/50k hr Damp Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 07/19/18
19 LEDH-RT4ICAR 120VAC LED DoB 4 IC/AIR-TIGHT Recessed Down Light for Remodeling 4 LED 12 (305mm) 5-5/8 (142.3mm) The LEDH-RT4ICAR housing is designed for use with a separate LED Trim Module that is integrated with heat sink and is available with three trim styles. This Remodeling fixture offer easy and fast installation using a disconnect device and is held securely in the housing with two friction blade brackets. The LED DoB 120VAC Direct module is available in a 11W engine with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This luminaire is listed as IC and is suitable for direct contact with insulation. Suitable for Damp Locations. Housing Single wall aluminum housing gasketed for IC/Air-Tight ratings in insulated ceilings. 5-1/2 height allows use in 2 x 6 joist construction. LED Module & Trim Two-piece interchangeable trim for reflectors or baffles. Module construction includes LED, Heat Sink, Lens, Trims. White paint finish standard. Junction Box Listed for through branch circuit wiring (Max.8, 12 AWG, 90 C wire). (5) 1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Provided with listed quick connectors for easy wiring. Remodel Clips 3 remodel clips secure housing and accommodates 1/2 and 5/8 thick ceiling materials. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. LED Engine Aluminum Heat Sink computer designed in conjunction with an aluminum clad PC board for superior thermal management. Lumen Maintenance: L70, 70% lumens of initial 50,000 hours. Electrical Connection; Provided with quick connector between LED module and housing for easy plug and play installation. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing ENERGY STAR California Title /8 (105mm) 4-1/8 (105mm) Height : 5-5/8 Ceiling Cut-out : 4-3/8 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 11W Lumen (+/-5%) 750 lm Efficacy (LPW) 68 lm/w Beam Angle 27.8 CRI (Typical) 80 CCT (Color +/-5%) 2700K, 3000K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Damp Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 07/19/18
20 LEDT-C44 Reflector -HC = Haze Clear -PR = Pewter -CP = Champagne -WH = White Painted O.D : 4-7/8" 4 LED LEDT-C44-WH-WH LEDT-C42 Baffle -WH = White -BK = Black O.D : 4-7/8" LEDT-C42-WH-WH LEDQT-42 Square Diecast Baffle -WH = White Frame : 4-3/4" x 4-3/4" LEDQT-42-WH LEDT-C411 Gimbal Adjustable -WH = White -BK = Black O.D : 4-7/8 LEDT-C411 PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution ,800 1,500 1, CD: ,200 1,500 1,800 VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 1.0 ft fc 2.0 ft 47.1 fc 3.0 ft 26.5 fc 4.0 ft 17.0 fc 5.0 ft 11.8 fc 5.9 ft Beam Spread: 27.8 [LEDH-RT4ICA(R) DOB+LEDT-C44-HC] Ordering Information Housing Trim / Module -Watts -CRI / Color Temp.* -Reflector Finish* -Baffle Finish* -Trim Ring Finish* -Driver LEDH-RT4ICA = 4 IC, New Construction LEDT-C44 = Reflector LEDT-C42 = Baffle LEDQT-42 = Square Diecast Baffle -11 = 11W -827 = 80 CRI / 2700K -830 = 80 CRI / 3000K -840 = 80 CRI / 4000K -HC = Haze Clear -PR = Pewter -CP = Champane -WH = White Painted -WH = White -BK = Black -WH = White -BK = Black -DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) LEDT-C411 = Gimbal Adjustable Example : LEDH-RT4ICA LEDT-C HC-DOB * Consult factory for other Color Temperatures and Finishes
21 LED-AFR4 120VAC LED DoB 4 Recessed Diecast Retrokit with E26 or Optional GU24 base Adapter 4 LED 2-1/8 (54.5mm) 4-15/16 (126mm) 4-15/16 (126mm) The 4 LED DoB Retrokit Module & Trim kit with E26 medium base Adapter is designed for 6 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-tech models IIH-410, IH-410ICA and most compatible 4 housings certified under UL1598 standard. High efficacy 120VAC DoB (Driver on Board) LED Module with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Locations. LED Module & Trim Efficient one-piece diecast aluminum heat sink, baffle and trim with integrated LED DoB module. High reflectance White Baffle style Reflector improves beam distribution and uniformity. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Compatible Housings See Housing Compatibility section. Electrical Connection; E26 medium Edison connector provides easy retrofit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 10 W Lumen (+/-5%) 625 lm Efficacy (LPW) 62.5 lm/w Beam Angle 90.5 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
22 HOUSING COMPATIBILITY 4 LED LED-AFR4 ETL Listed for installation in the following Lum-Tech E26 screw based 4 standard and shallow recessed housings; 4 : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only) LED-AFR4 ETL Listed for retrokit in the following 4 recessed housing; Halo : H99T, H99RT, H99ICT All-Pro : ET400, ET400R, ET400AT Juno : TC1, TC1R, IC1P Capri : R4, RR4, R4ASIC Lithonia : L3, L3R Thomas : PS4, PS4RM, PS4ASIC PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFR4-830DOB] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width 80.8 fc 4.0 ft 20.2 fc 8.1 ft 9.0 fc 12.1 ft 5.1 fc 16.1 ft 3.2 fc 20.2 ft 2.2 fc 24.2 ft Beam Spread: 90.5 Ordering Information Model -CRI Color Temp.* Finish* Driver -Options LED-AFR4 = 4, 10W Recessed Diecast Retrokit -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-AFR4-830DOB-GU24A * Consult factory for other Color Temperatures and Finishes
23 LED-LFR4 120VAC LED DoB 4" Recessed Retrokit with E26 or Optional GU24 base Adapter 4 LED 1-3/4 (45mm) 4-15/16 (126mm) 4-15/16 (126mm) The 4 LED DoB Retrokit with E26 medium base Adapter ideal for 4 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-Tech models IH-410, IH-410ICA and most 4 housings certified under UL1598 standard. High efficacy 120VAC LED DoB (Driver on Board) Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. LED Module Efficient one piece aluminum heat sink, reflector or baffle and integrated LED DoB module. High reflectance White Reflector or Baffle improves beam distribution and uniformity. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Compatible Housings All 4 recessed housings from Halo, Juno, Capri, Lithonia, Thomas and Prescolite. Electrical Connection; E26 medium Edison connector provides easy retrokit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 300W max load dimmer switch. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 10 W Lumen (+/-5%) 625 lm Efficacy (LPW) 62.5 lm/w Beam Angle 90.5 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
24 HOUSING COMPATIBILITY LED-LFR4 ETL Listed for installation in the following Lum-Tech E26 screw based 4 standard recessed housings; 4 : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only) 4 LED LED-LFR4 ETL Listed for retrokit in the following 4 recessed housing; Halo : H99T, H99RT, H99ICT All-Pro : ET400, ET400R, ET400AT Juno : TC1, TC1R, IC1P Capri : R4, RR4, R4ASIC Lithonia : L3, L3R Thomas : PS4, PS4RM, PS4ASIC PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-LFR4-830RWH-DOB] 2.0ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width 80.8 fc 4.0 ft 20.2 fc 8.1 ft 9.0 fc 12.1 ft 5.1 fc 16.1 ft 3.2 fc 20.2 ft 2.2 fc 24.2 ft Beam Spread: 90.5 Ordering Information Model -CRI Color Temp.* Finishes (Reflectors & Baffles)* -Driver -Options LED-LFR4 = 4, 120VAC, 10W Recessed Retrokit -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K RWH = White Reflector RBK = Black Reflector BWH = White Baffle BBK = Black Baffle -DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-LFR4-830RWH-DOB-GU24A * Consult factory for other Color Temperatures and Finishes
25 LEDH-NCR5ICA 120VAC LED DoB 5 Recessed Housing Down Light with Baffle Trim for IC type New Construction Applications 5 LED 7-3/8 (187mm) 3-7/8 (98mm) 7-1/8 (181mm) 7-1/4 (184mm) Ceiling Cut-out : 5-1/2 The LEDH-NCR5ICA down light is a 5, IC rated luminaire. The LED DoB 120VAC Direct engine has a 12.5W LED Module with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This easy to install fixture is designed for New Construction applications with insulated ceilings. Thermally protected, Suitable for Wet Locations. LED Module & Trim Durable, one-piece die cast aluminum heat sink with integrated trim. Module construction includes LED, heat sink, lens and baffle trim. White painted finish standard. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. Sealed for Wet Locations and is ideal for shower rooms. Mounting Provided with a plaster frame (7-1/8 x 7-1/8 ) for new construction. HB-24 bar hangers are available as an accessory for new construction. Electrical Connection; J-box: - Installed on the top of fixture with (5)1/2 knockout. - Listed for through branch circuit wiring (max. 4, 12 AWG, 90 C rated wire). - Ground wire provided. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Accessories HB-24 hanger bars for use with housing plate for new construction applications Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 895 lm Efficacy (LPW) 71.6 lm/w Beam Angle 96.3 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
26 LEDH-NCR5ICAR 120VAC LED DoB 5 Recessed Housing Down Light with Baffle Trim for IC type Remodeling Applications 5 LED 7-1/4 (184mm) 3-7/8 (98mm) 7-1/4 (184mm) 7-1/4 (184mm) Ceiling Cut-out : 5-1/2 The LEDH-NCR5ICAR down light is a 5, IC rated luminaire. The LED DoB 120VAC Direct engine has a 12.5W LED Module with integral triac dimming and can be controlled with most of leading and trailing edge dimmer switches. This easy to install fixture is designed for Remodeling applications with insulated ceilings. Thermally protected, Suitable for Wet Locations. LED Module & Trim Durable, one-piece diecast aluminum heat sink with integrated trim. Module construction includes LED, heat sink, lens and baffle trim. (2) mounting clips on trim module for remodeling jobs. White painted finish standard. Lens High Impact Thermal plastic. Translucent, high lumen transmission and diffusing for even illumination. Sealed for Wet Locations and is ideal for shower rooms. Electrical Connection; J-box: - Installed on the top of fixture with (5)3/4 knockout. - Listed for through branch circuit wiring (max. 8, 12 AWG, 90 C wire). - Ground wire provided. 120VAC Direct DoB Driver on Board with customized IC chip % triac dimmable with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for a maximum 45 fixtures per run on a 600W max load per dimmer switch and a max. 23 fixtures per a dimmer switch for a 300W load. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 895 lm Efficacy (LPW) 71.6 lm/w Beam Angle 96.3 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
27 5 LED PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 4.5 ft 26.5 fc 8.9 ft 11.8 fc 13.4 ft 6.6 fc 17.9 ft 4.2 fc 22.3 ft 2.9 fc 26.8 ft Beam Spread: 96.3 [LEDH-NCR5ICA(R)-830DOB] Ordering Information Model -CRI Color Temp.* Finish* Driver Accessories LEDH-NCR5ICA= 5, 12.5W Recessed IC, New Construction LEDH-NCR5ICAR = 5, 12.5W Recessed IC, Remodeling -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) HB-24 = 24 adjustable Hanger Bars (2) LEDH-NCR5ICA only Example : LEDH-NCR5ICA-830DOB * Consult factory for other Color Temperatures and Finishes
28 LEDH-RT56ICA 6 IC/AIR-TIGHT Recessed Down Light Housing for New Construction with Lum-Tech 120VAC LED DoB 56 and 6" Retrokits 7-1/2" (190mm) 10-3/8" (263.5mm) 6-1/8" (157mm) 7-5/8" (193.6mm) 2-11/16" (68mm) [Shown with LED-AFR56 Retrokit ] 7-1/4" (184mm) Height : 7-1/2 Housing Aperture : 6-1/8 Ceiling Cut-out : 6-1/2 The LEDH-RT56ICA is a 6, IC/AIR TIGHT rated down light housing. This easy to install housing is designed for use in New Construction applications with insulated ceilings. The housing is designed to be used with Lum-Tech s 56 and 6 Retrokits and gives you a choice of seven versatile DOB kits for your projects. Housing Single wall aluminum housing gasketed for IC/Air-Tight ratings in insulated ceilings. Housing can be adjusted for ceiling thicknesses up to 1-1/4 Junction Box Listed for through branch circuit wiring (Max.8, 12 AWG, 90 C wire). (5) 1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Provided with listed ZE genderless quick connectors for easy wiring to Lum-Tech retrokits. Compatible Lum-Tech LED DoB Retrokits LED-AFR56: 120VAC LED DoB 5 and 6 Recessed Diecast Retrokit LED-LFR56: 120VAC LED DoB 5 and 6 Recessed Retrokit LED-AFC6: 120VAC LED DoB 6 Recessed Retrokit with Interchangeable Trims LED-AF6E : 120VAC LED DoB 6 Recessed Eyeball Retrokit LED-LF6AD : 120VAC LED DoB 6 Recessed Gimbal Retrokit 11/15/17
29 LEDH-RT56ICAR 6 IC/AIR-TIGHT Recessed Down Light Housing for Remodeling with Lum-Tech 120VAC LED DoB 56 and 6" Retrokits 12-3/4 (324mm) 7-1/2 (191mm) 6-1/8 (157mm) 2-11/16" (68mm) [Shown with LED-AFR56 Retrokit ] 7-1/4" (184mm) Height : 7-1/2 Ceiling Cut-out : 6-1/2 The LEDH-RT56ICAR is a 6, IC/AIR TIGHT rated down light housing. This easy to install housing is designed for use in Remodeling applications with insulated ceilings. The housing is designed to be used with Lum-Tech s 56 and 6 Retrokits and gives you a choice of seven versatile DOB kits for your projects. This luminaire is listed as IC and is suitable for direct contact with insulation. Housing Single wall aluminum housing gasketed for IC/Air-Tight ratings in insulated ceilings. 7-1/2 height allows use in 2 x 8 joist construction. Junction Box Listed for through branch circuit wiring (Max.8, 12 AWG, 90 C wire). (5) 1/2" knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box. Provided with listed ZE quick connectors for easy wiring to Lum-Tech retrokits. Compatible Lum-Tech LED DoB Retrokits LED-AFR56 : 120VAC LED DoB 5 and 6 Recessed Diecast Retrokit LED-LFR56 : 120VAC LED DoB 5 and 6 Recessed Retrokit LED-AFC6 : 120VAC LED DoB 6 Recessed Retrokit with Interchangeable Trims LED-AF6E : 120VAC LED DoB 6 Recessed Eyeball Retrokit LED-LF6AD : 120VAC LED DoB 6 Recessed Gimbal Retrokit 11/15/17
30 LED-AFR56 120VAC LED DoB 5" & 6 Diecast recessed Retrokit with E26 or Optional GU24 base Adapter 5 & 6 LED 2-11/16 (68mm) 7-1/4 (184mm) 7-1/4 (184mm) The 6 Diecast Retrokit LED module & trim kit with E26 medium screw base is designed for the 5 and 6 IC/Airtight and Non-IC incandescent recessed downlight and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-Tech models IH-520ICA, IH-620ICA, IH-520, IH-620, shallow IH-640ICA, IH-640 and most 5 and 6 housings certified under UL1598 standard. High efficacy 120V DOB LED (Driver on Board) Module (Campcell ) with integral triac dimming capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. LED Module & Trim Efficient diecast aluminum heat sink/baffle with integrated LED DoB module. High reflectance White Baffle style Reflector improves beam distribution and uniformity. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Mounting Dual torsion springs easily mount and adjust to compatible 5" & 6" recessed housings that have spring mounting tabs. Compatible Housings See Housing Compatibility section Electrical Connection; E26 medium Edison connector provides easy retrofit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 300W max load dimmer switch. Warranty Lamp Life: 5 years/50k hours. Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 895 lm Efficacy (LPW) 71.6 lm/w Beam Angle 96.3 CRI (Typical) 85 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac Lamp Life 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
31 5 & 6 LED HOUSING COMPATIBILITY LED-AFR56 ETL Listed for installation in the following Lum-Tech E26 screw based 5 and 6 standard and shallow recessed housings; 5 : IH-520ICA, IH-520ICAR, IH-520I, IH-520R 6 : IH-620ICA, IH-620ICAR, IH-610, IH-620R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AFR56 ETL Classifed for retrokit in the following 5 and 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICT, H7UICAT, H27ICAT, H27RICAT, H27ICT, H27RICT, H27T, H27RT, H5ICAT, H5RICAT, H5T, H5RT, H25ICAT All-Pro : 500AT, EI500RAT, ET500, ET500R, EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R Capri : CR1, PR1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFR56-830DOB] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 4.5 ft 26.5 fc 8.9 ft 11.8 fc 13.4 ft 6.6 fc 17.9 ft 4.2 fc 22.3 ft 2.9 fc 26.8 ft Beam Spread: 96.3 Ordering Information Model Color Temp.* Finish* Driver -Options LED-AFR56 = 5 /6, 12.5W Recessed Diecast Retrokit 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-AFR56-830DOB-GU24A * Consult factory for other Color Temperatures and Finishes 02/07/17
32 LED-LFR56 120VAC LED DoB 5 and 6 Recessed Retrokit with E26 or Optional GU24 base Adapter 5 & 6 LED 2-1/2 (63mm) 7-1/4 (184mm) The 5 & 6 LED DoB Retrokit Module & Trim kit with E26 medium base Adapter is designed for 5 & 6 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. Selection of interchangeable trim styles and finishes complement any design. It is designed for use with Lum-Tech models IH-520ICA, IH-620ICA, IH-520, IH-620, shallow IH-640ICA, IH-640 and most 5 & 6 housings certified under UL1598 standard. High efficacy 120VAC LED DoB (Driver on Board) Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. LED Module Efficient aluminum heat sink with integrated DOB LED module. High reflectance White Reflectors and Baffles improve beam distribution and uniformity. Trim Available with Reflector or Baffle styles in standard and custom colors. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Mounting Precision formed steel torsion springs. Dual torsion springs easily mount and adjust to compatible 5" & 6" recessed housings that have spring mounting tabs. Easy trim installation with snap-on clips. Compatible Housings All 5" & 6 recessed housings from Halo, Juno, Capri, Lithonia, Thomas and Prescolite. Electrical Connection; E26 medium Edison connector provides easy retrokit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 ID 7-1/4 (184mm) [ ID ] LED-LFR56 : 4-7/8 SPECIFICATION Item No. LED-LFR56 Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 810 lm Efficacy (LPW) 64.8 lm/w Beam Angle 92.7 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers 10/26/17
33 HOUSING COMPATIBILITY 5 & 6 LED LED-LFR56 ETL Listed for installation in the following Lum-Tech E26 screw based 5 and 6 standard and shallow recessed housings; 5 : IH-520ICA, IH-520ICAR, IH-520I, IH-520R 6 : IH-620ICA, IH-620ICAR, IH-610, IH-620R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-LFR56 ETL Listed for retrokit in the following 5 and 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICT, H7UICAT, H27ICAT, H27RICAT, H27ICT, H27RICT, H27T, H27RT, H5ICAT, H5RICAT, H5T, H5RT, H25ICAT All-Pro : 500AT, EI500RAT, ET500, ET500R, EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R Capri : CR1, PR1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS LED-LFR56 Retrokit Reflectors and Baffles Reflector White or Clear Reflector O.D : 7-1/4" (184mm) for 5/6 housing Baffle White or Black Baffle O.D : 7-1/4" (184mm) for 5/6 housing RWH BWH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-LFR56-830DOB] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 4.2 ft 25.9 fc 8.4 ft 11.5 fc 12.6 ft 6.5 fc 16.8 ft 4.1 fc 21.0 ft 2.9 fc 25.2 ft Beam Spread: 92.7 Ordering Information Model -CRI Color Temp.* Finishes (Reflectors & Baffles)* -Driver -Options LED-LFR56 = 5 / 6, 120VAC, 12.5W Recessed Retrokit -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K RWH = White Reflector RBK = Black Reflector BWH = White Baffle BBK = Black Baffle -DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-LFR56-830RWH-DOB-GU24A * Consult factory for other Color Temperatures and Finishes
34 LED-AFC6 120VAC LED DoB 6 Recessed Retrokit with Interchangeable Trims and E26 or Optional GU24 base Adapters 6 LED 4-5/16 (110.2mm) 7-9/16 (192mm) 5-11/16 (144mm) The 6 LED DoB Retrokit Module & Trim kit with E26 medium base Adapter is designed for 6 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-tech models IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and most 6 housings certified under UL1598 standard. High efficacy 120VAC DoB (Driver on Board) LED Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. LED Module Efficient aluminum extrusion heat sink with integrated LED DoB module High reflectance White Reflectors and Baffles improves beam distribution and uniformity. Trims Available with Reflectors in White or anodized Clear Haze and Baffle trims in White or Black. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Mounting Precision formed steel torsion springs easily adjust to 6" housings. Dual torsion springs easily mount into compatible 6" recessed housings that have spring mounting tabs. Easy trim installation with snap-on clips. Compatible Housings See Housing Compatibility section Electrical Connection; E26 medium Edison connector provides easy retrokit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 885 lm Efficacy (LPW) 70.8 lm/w Beam Angle 54.3 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
35 6 LED HOUSING COMPATIBILITY LED-AFC6 ETL Listed for installation in the following Lum-Tech E26 screw based 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-620R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AFC6 ETL Listed for retrokit in the following 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICT, H7UICAT, H27ICAT, H27RICAT, H27ICT, H27RICT, H27T, H27RT, H5ICAT, H5RICAT, H5T, H5RT, H25ICAT All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R Capri : CR1, PR1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS LED-AFC6 Retrokit Reflectors and Baffles Reflector White or Clear Reflector O.D : 7-9/16" (192mm) for 5/6 housing Baffle White or Black Baffle O.D : 7-9/16" (192mm) for 5/6 housing RHC RWH BWH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFC6-827RHC-DOB] 2.0ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 2.0 ft 56.9 fc 4.1 ft 25.3 fc 6.1 ft 14.2 fc 8.2 ft 9.1 fc 10.2 ft 6.3 fc 12.3 ft Beam Spread: 54.3 Ordering Information Model -CRI Color Temp.* Finishes (Reflectors & Baffles)* -Driver -Options LED-AFC6 = 6", 120VAC, 12.5W Recessed Retrokit with Interchangeable Trims -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K RWH = White Reflector RHC = Haze Clear Reflector BWH = White Baffle BBK = Black Baffle -DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-AFC6-830RWH-DOB-GU24A * Consult factory for other Color Temperatures and Finishes
36 LED-AF6E 120VAC LED DoB 6" Recessed Eyeball Retrokit with E26 or Optional GU24 base Adapter 6 LED 3-3/16 (80.6mm) 7-3/4 (196.5mm) 4-1/2 (114.9mm) The 6 eyeball LED Retrokit Module & Trim kit with E26 medium base Adapter is designed for 6 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-Tech models IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and most 6 housings certified under UL1598. High efficacy 120VAC DoB (Driver on Board) LED Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Location. LED Module Efficient aluminum extrusion heat sink with integrated LED DoB module. Eyeball head rotates 358 degrees and can tilt 0-30 degrees. Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Mounting Precision formed steel torsion springs easily adjust to 6" housings. Dual torsion springs easily mount into compatible 6" recessed housings that have spring mounting tabs. Compatible Housings See Housing Compatibility section Electrical Connection; E26 medium Edison connector provides easy retrokit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 300W max load dimmer switch. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 820 lm Efficacy (LPW) 65.6 lm/w Beam Angle 78.9 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
37 6 LED HOUSING COMPATIBILITY LED-AF6E ETL Listed for installation in the following Lum-Tech E26 screw based 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-620R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AF6E ETL Listed for retrokit in the following 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT, H7TNB, H7TCP, H7UICT, H7UICAT, H27ICAT, H27RICAT, H27ICT, H27RICT, H27T, H27RT, H5ICAT, H5RICAT, H5T, H5RT, H25ICAT All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R Capri : CR1, PR1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AF6E-830DOB] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 3.3 ft 29.6 fc 6.6 ft 13.2 fc 9.9 ft 7.4 fc 13.2 ft 4.7 fc 16.5 ft 3.3 fc 19.8 ft Beam Spread: 78.9 Ordering Information Model -CRI Color Temp.* Finish* Driver -Options LED-AF6E = 6", 120VAC, 12.5W Recessed Eyeball Retrokit -8 = 80 CRI -9 = 90 CRI 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K blank = White (Standard) DOB = 120V Direct Driver on Board (dimmable with most Line or Low Voltage Dimmers) -GU24A = GU24 Adapter -ZE = Genderless Quick Connector (Select when ordering with LEDH Housings) Example : LED-AF6E-830DOB-GU24A * Consult factory for other Color Temperatures and Finishes
38 LED-AF6AD 120VAC LED DoB 6 Recessed Gimbal Retrokit with E26 or Optional GU24 base Adapter 6 LED 3-3/16 (80.6mm) 7-3/4 (196.5mm) 4-15/16 (125mm) The 6 LED DoB Gimbal Retrokit with E26 medium base Adapter ideal for 6 IC/Airtight and Non-IC incandescent recessed downlights and has an optional GU24 adapter for CFL housings. It is designed for use with Lum-Tech models IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and most 6 housings certified under UL1598 standard. High efficacy 120VAC LED DoB (Driver on Board) Module (Campcell ) with integral triac dimmer capability. The optical diffusing lens produces high lumen transmission and even illumination. Suitable for Wet Locationn. LED Module Efficient aluminum extrusion heat sink with integrated LED DoB module. Gimbal head rotates 358 degrees and can tilt 0-30 degrees. High reflectance Reflector improves beam distribution and uniformity Lens High impact translucent plastic lens. High lumen transmission and diffusing for even illumination. Mounting Precision formed steel torsion springs easily adjust to 6" housings. Dual torsion springs easily mount into compatible 6" recessed housings that have spring mounting tabs. Compatible Housings See Housing Compatibility section Electrical Connection; E26 medium Edison connector provides easy retrokit of screw based incandescent housings. Optional GU24 base Adapter available for CFL housings. 120VAC LED Power Supply on-board with stated-of-the-art customized IC chip (DoB) % triac dimming with most of leading and trailing edge incandescent & low voltage dimmer switches. Advanced driver circuit design (Pat. Pending) prevents damage to the LED module and switch from common inrush currents. Recommended for use max. 45 fixtures per run on a 600W max load dimmer switch. 23 fixtures per run on a 300W max load dimmer switch. Limited Warranty LED Module: 5 years/50k hours Product: 3 years Listing cetlus Wet Location ENERGY STAR California Title 24 SPECIFICATION Input Voltage 120VAC Wattage (+/-5%) 12.5 W Lumen (+/-5%) 900 lm Efficacy (LPW) 72 lm/w Beam Angle 74 CRI (Typical) 80, 90 CCT (Color +/-5%) 2700K, 3000K, 3500K, 4000K Dimming Triac LED Module 5 yr/50k hr Environment Wet Location Trailing Edge Dimmer Diva DVCL Series Diva DVLV Series Nova T NT Series Glyder GLV Series Ariadni AYCL Series RadioRA 2 10ND Series Skylark SLV Series Skylark SLV Series Skylark Contour CTCL Series Maestro Wireless MRF2-6ND Series Lutron Homeworks RPM-4U Lutron Homeworks QS HQRD-6ND Series Lutron Homeworks QS HQRD-10ND Series - Leviton Model Numbers : SureSlide 6633 Leading Edge Dimmer Diva DVELV Series Skylark SELV Series Nova T NTELV Series RadioRA RRD-6NA Series Maestro MAELV Series Maestro MRF2-6ELV Series Lutron Grafik Eye PHPM-PA Series Lutron Homeworks QS HQRD-6NA Series Consult tech. service or factory for additional dimmers
RESIDENTIAL GRADE
1 RESIDENTIAL GRADE LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Bulb 4-13/16 (123mm) DESCRIPTION 3-3/4 (95mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W The
More informationLEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing
LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Blub 4-13/16 (123mm) DESCRIPTION The LEDH-310ICA is 3.5 low voltage LED housing for accent task lighting. APPLICATION
More informationFLUSH MOUNT DISK LIGHT
7 www.lum-techlighting.com FLUSH MOUNT & DISK LIGHT CMED-605 DoB 5 Ceiling Puck CMED-607 DoB 7 Ceiling Puck [CMED-605 : 5 ] (5.5"dia. x 1") Ceiling Puck Ceiling Flush Mount [ CMED-607 : 7 ] (7"dia. x 1")
More informationORIGIN. Downlights. For New Construction & Remodeling. Commercial & Residential First Edition
ORIGIN Downlights 2017 First Edition For New Construction & Remodeling Commercial & Residential Contents Retrofits & Residential Retrofit Kits 6 standard reflector module 6 eyeball reflector module 5 7
More informationDRD1 Surface Mount or Recessed LED Downlight General New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS All-in-one LED luminaire for retrofit, remodel, and new construction Slim, drawn aluminum construction Easy, tool-less installation for 4, 5 or 6 recessed housings 750 lumens of
More informationDRD2 Recessed LED Downlight General Remodel 4", 5", 6" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Die-formed steel with powder coat finish (4" frame-in kit, 4" shallow frame-in kit), 20 ga. die-formed aluminum (5" frame-in kit), 22 ga. die-formed aluminum
More informationFahrenheit DRD3 Adjustable LED Downlight Fire and Sound-Rated New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Fire and sound-rated housing. Up to 20 minute fire rated L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #24 gauge galvanized steel construction.
More informationDRD3 Adjustable Recessed LED Downlight General New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS 360 directional aim with up to 40 adjustable tilt Maximum installation compatibility Twist & Lock feature for easy trim installation 750 & 000 lumen outputs 2700K, 3000K, 3500K,
More informationRL530-12W-120V-DIM-FL / RL507-12W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component
RL530-12W-120V-DIM-FL / RL507-12W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION The Elite Module LED has been engineered for
More informationDRDHNJ Recessed LED Downlight General New Construction Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2 trade size knockouts (two side, two top) to allow straight conduit
More informationAperture. Color Quality. 90+ CRI, 2-step SDCM. 2700K 3000K 3500K 4000K Spot (20 ) Narrow Flood (30 ) Flood (40 ) 4000cd (Spot 750 lm) Dimming
Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 With multiple ratings, OneFrame is compliant in a wide range of situations Thanks to a unique low profile and small aperture design, OneFrame can
More informationOneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. DRDHNJD equipped with (8) trade size knockouts (four concentric side ( 3 /4" + 1 /2"), two
More informationLED RECESSED DOWNLIGHT MODULES
LED RECESSED DOWNLIGHT MODULES WHAT SETS US APART INNOVATION We combine the latest energy efficient technology and design styles to create an extensive range of attractive and sustainable luminaires. We
More informationDRD2 Recessed LED Downlight General New Construction Junction Box PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2" trade size knockouts (two side, two top) to allow straight conduit
More informationOneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V Twist & Lock feature for easy trim installation 750 & 1000 lumen outputs, powered by Cree 93+ CRI LEDs 2700K, 3000K, 3500K,
More informationLEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders.
LEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders. Catalog # Project Prepared by Type Date 5 LED Cylinder 7-7/8 (200mm) DESCRIPTION [Ceiling Mount : LEDH-SR5C] 5 aperture cylinder light, Provided in high
More informationDRD2 & SurfaceFrame. Shallow Recessed LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little as 2" of ceiling
More informationDesigned to roll with the changes. Affordability and versatility make HALITETM. the modular downlight that adapts to you.
Designed to roll with the changes. Affordability and versatility make HALITETM the modular downlight that adapts to you. HALITETM Modular is putting it mildly. HALITE was designed to be both easily customized
More information- Replace existing can lights in new acoustical ceiling tiles in both basement bathrooms (see above for fixture type).
The Vets Box Office and Bathroom Refurbishment Addendum #1 Walk Through Question and Response September 21, 2017-2 Recessed can lights (LEDH-410ICA recessed housing with LT-42-BK Trim) and one (SLED 4818
More informationOneFrame & DRD2X Apex Series Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V High performance Apex Series DRD2 Architectural-grade illumination produces up to 4000 candelas of focused light Precise,
More informationDRD2 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
More informationClassic Frame & DRD2X Apex Series Recessed LED Downlight Commercial Remodel 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-formed sheet metal. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs.
More informationRL430-10W-120V-DIM-FL / RL407-10W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component
RL430-10W-120V-DIM-FL / RL407-10W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION The Elite Module LED has been engineered for
More informationDRD2X & OneFrame Concrete Apex Series Recessed LED Downlight
DRD2X & OneFrame Concrete Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 Designed for high rise structures that require steel and concrete for reinforcement Features spot-welded areas and adaptations
More informationDRD2 Recessed LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (10.8W), 1000 lm (12.8W). COLOR QUALITY: 93+ CRI, 2-step SDCM. CCT OPTIONS: 2700K,
More informationDRD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
More informationOneFrame & DRD2 Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit runs. Approved for 8 (four in, four out) #12 AWG C. MOUNTING:
More informationOneFrame & DRD4 Adjustable Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit
More informationDRD5S Surface Mount LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Optimized LED array delivers smooth, uniform illumination with no visible fasteners or dark spots. LUMEN OUTPUT (POWER): 750 Im (9.0W), 1000 lm (12.0W). SHAPE:
More informationMore LED retrofit options. New low price.
More LED retrofit options. New low price. Available in, 5 and 6 versions, with or without baffle. RABWEB.COM 888 722-000 LED RETROFITS Savings of up to $500 over 00,000 hrs* 2W replaces 90W PAR, 8W replaces
More informationProfessional-grade LED downlights
Professional-grade LED downlights High end. Low profile. Affordable price. RABWEB.COM 888 722-000 LED NEW CONSTRUCTION 2W replaces 75W R30, 20W & 26W replace 00W PAR Up to 856 lumens/7 LPW Dimmable down
More informationDRD5S & SurfaceFrame. Surface Mount LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
New Construction Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 2 x 750 lm (23.6W), 2 x 000 lm (29.4W),
More informationDRD5S. Surface Mount LED Downlight JA8. Retrofit Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Thinnest-in-class delivers the pure, smooth light and the elegant look of a high-end recessed downlight Extends just 0.6 inches below the ceiling
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LEDs enable excellent fixture to fixture color consistency and long lifetime. Delivers 93+ CRI in all available color temperatures.
More informationLCD4 4 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationLCD6 6 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationLCD8 8 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Surface, Cord, Stem or Wall mounting options Available in White, Black, Bronze, Brushed Aluminum or Custom Color finishes Decorative frosted trim available 750, 000, 500 or 2000
More informationDCCX Apex Series Commercial LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise, targeted beam of low
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 750 / 750 lm (.8W /.8W), 000 / 000
More informationCIRRUS SUSPENSION WALL WASH WITH REMOTE POWER, END FEED
Adjustable Max. 5 ft. Description Cirrus Suspension Wall Wash with Remote 24VDC power supply (sold separately) is a linear LED fixture that offers a wall wash lens for a smooth and uniform beam spread.
More informationNRM2-511 / NRM2-512 / NRM2-518
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM2-511 / NRM2-512 / NRM2-518 5" Marquise II Reflectors Marquise II COB Series enhances an established series of downlighting
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationDCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount. Product Code: Spec Sheet V
Project: Product Code: Type: Date: Spec Sheet V- 08.20.8 Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for
More informationLAD8R - Remodel 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8R - Remodel 8 inch Remodel LED downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even
More informationCatalog Number. Notes
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light
More informationNIOB-2 2" BWF IOLITE TRIMS
NIOB-2 2" BWF IOLITE TRIMS New Construction or Remodel Housing Required Source: LED, 14 Watts, 8 Lumens Nora Lighting s 2" Iolite BWF trims are small aperture downlights that can be specified for use in
More informationReflectors are compatible with respective Marquise I series housings manufactured by Nora Lighting.
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS BATTERY PACK NRM-6 / NRM-62 / NRM-68 6" Marquise I Reflectors 6" Marquise Series with thermal management system combined in a single compact unit. Cree TrueWhite
More informationLAD6 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More information2000 LUMENS A3-LED. Submittal form is Tel: Fax:
UPTO 2 LUMENS DESCRIPTION: Achieve all of your lighting application objectives with only one universal high-performance architectural housing. The Fusion A3-LED is a 3 LED Universal Downlight that can
More informationLAD6R - Remodel 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6R - Remodel 6 inch LED remodel downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even
More informationTrack Light. LIFETIME: 50,000 hours at 70% lumen maintenance. PHOTOMETRIC TESTING: Tested in accordance to IESNA LM
PRODUCT SPECIFICATIONS Track Light LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 900 lm (16.6W). CRI: 90+. CCT: 2700K, 3000K, 3500K, 4000K. BINNING: Color variation within
More informationHALO H5RICAT. 5" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION The Halo H5 series utilizes a nominal 5" aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different
More informationLAD8 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More information2 LED downlight. Discreet styling, bold performance. RABWEB.COM
2 LED downlight Discreet styling, bold performance. RABWEB.COM 888 722-1000 Clean, unobtrusive design delivers smooth and abundant light from an aperture just over 1 inch wide. 8W replaces 50W MR16 with
More informationNRM-511 / NRM-512 / NRM-518
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM-511 / NRM-512 / NRM-518 5" Marquise I Reflectors 5" Marquise Series with thermal management system combined in a single
More informationCIRRUS CEILING WALL WASH WITH REMOTE POWER
0.9" 0.9" CIRRUS CEILING WALL WASH (ACTUAL SIZE) CIRRUS CEILING WALL WASH LENS (ACTUAL SIZE) DESCRIPTION At 7.3 or 9.6 watts per foot, Cirrus Channel Wall Wash contains 85+ or 95+ CRI LEDs. Fixture mounts
More information95+ CRI 90+ CRI 95+ CRI. Product Watts Color Temp CRI Version Driver Optional. 3G 3rd Gen
DESPTION The Novation shallow downlight has a height of just -/ inches with an adjustable housing that utilizes a heat pipe module that can tilt up to and rotate a full. W Output Performance Color Temperature
More informationLAD4 4 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationNRM-411 / NRM-412 / NRM-413 / NRM-418 4" Marquise I Reflectors
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS BATTERY PACK ILLUMINATING THE FUTURE...SINCE 989 NRM-4 / NRM-42 / NRM-43 / NRM-48 4" Marquise I Reflectors Source: W to 6W LED 850lm to 250lm 4" Marquise Series
More informationHALO H7T. 6" RECESSED DOWNLIGHTING Incandescent
6" RECESSED DOWNLIGHTING Incandescent 6" Aperture Non-IC Ceiling 120V Line Voltage RECESSED DOWNLIGHTING Thermally Protected Housing Insulation must be kept 3" from all sides of the housing For use with
More informationHALO H1499T. 4" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION 4-1/2" [114mm] ceiling opening The is a small aperture low voltage housing for providing accent and task lighting. The is designed for use in non-insulated ceiling or for insulated
More informationReflectors are compatible with respective Marquise II series housings manufactured by Nora Lighting.
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM2-611 / NRM2-612 / NRM2-618 6" Marquise II Reflectors 6" Marquise II reflectors includes Cree COB LEDs with optimized
More informationDCC2. LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 The cylinder s combination of precise illumination and refined aesthetics can take your designs to new heights Available in a range of form factors,
More informationRetrofit LED Basics Series. Economical 4", 5" and 6" LED Retrofit Trims
Retrofit LED Basics Series Economical 4", 5" and 6" LED Retrofit Trims Saves up to in energy costs when compared to 65W incandescent light source. Adaptive. Stylish. Diminutive. 2 Juno Lighting Group Juno
More information"Quick Connect" Connectors materials.. Socket. Remodel Clips. Transformer. Support Spring
4 perture Shallow Ceiling Remodel ousing 12V Low Voltage MR16 alogen RECESSED DOWNLIGTING Thermally Protected Non-IC Shallow Ceiling Low Voltage Remodel ousing Integral magnetic Transformer Insulation
More information0.25" (0.64cm) Grip Jack Connector 2WDC WDC Lumen values are based on the 3000K LED test.
0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. Description: Cirrus Channel Suspension D1 features a direct flat lens with 100 degree beam spread. At
More informationRemote Power Supplies * & Dimmers (Sold Separately): Electronic Low Voltage Dimming (ELV) 0-10 Volt Dimming (0-10V) Lutron
0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. 0.9" 0.35" (0.9cm) 0.9" 0.38" (0.95cm) Description: Cirrus Channel Suspension Wall Wash uses a wall wash
More informationHALO H99ICT. 4" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION The is a small aperture housing for accent and task lighting. The is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an IR-TITE housing
More informationDCD1 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
More informationNOVA suspension up and down, end feed with remote power supply
Shown without Louver Shown with White Louver Description Nova Suspension Up/Down is a linear LED lighting 2 circuit system that features both direct and indirect light. This contemporary system allows
More informationDCD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
More information90+ CRI 95+ CRI 95+ CRI 95+ CRI 90+ CRI 95+ CRI
DESPTION 3 LED dedicated IC downlight with precision aiming and punchy, smooth beams SPECIFICATIONS Watts: 23W/14W Volts: 120-277 VAC : 90 or 95 Color consistency: 2-step binning LEDs Life: > 61,000 hours
More informationHALO H7ICAT. 6" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION 6 1/2" [165mm] The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different
More informationMini Cavaletto. Recessed Adjustable Wall Wash
Recessed Adjustable Wall Wash Features The Mini Cavaletto LED is a compact, recessed adjustable wall wash luminaire for commercial and retail environments. The high-performance optical head with various
More informationDCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 Apex Series delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise,
More informationMini Cavaletto. Recessed Adjustable Wall Wash
Recessed Adjustable Wall Wash Features The Mini Cavaletto LED is a compact, recessed adjustable wall wash luminaire for commercial and retail environments. The high-performance optical head with various
More informationThe RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers.
RSQ All-Purpose Square Lens LED Modules Dimming Guide and Step-down Transformer Application Note HALO The RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers. RSQ4 RSQ5
More informationR6NC 6" LED Recessed Downlight: Universal New Construction Housing
Specifications/Features Housing/Mounting Specification grade 6" housing, 6-1/2" aperture. 6-5/8" Ceiling opening. 16 Gauge galvanized steel housing with die-cast aluminum heat sink. Requires minimum 3"
More information800 TO 9000 LUMEN 8 LED SILENT CEILING DOWNLIGHT HYPERBOLIC OPEN APERTURE L8 SERIES
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 100 Efficacies up to 109 lm/w Superior-quality white LED light output using Chip on Board technology
More informationCIRRUS SUSPENSION WITH RECTANGULAR 1 LENS WITH REMOTE POWER, END FEED
Diffused Rectangular 1 Lens Description Cirrus R1 Suspension with Remote Power is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus R1 is available in various increments
More informationCatalog # Project. Comments. Prepared by MAX HEIGHT (SEE TABLE) NARROW 5-15/16" [151mm] 5-15/16" [151mm] 7-11/16" [195mm]
ESCRIPTION 6-inch recessed LE for international, remodel or retrofit applications. Offered with narrow, medium, or wide beam reflectors designed for glare free even illumination. Featuring a two-stage
More informationHigh Performance LED LIGHTING SOLUTIONS PAR30 PAR20
+ PAR30 High Performance LED LIGHTING SOLUTIONS + PAR20 1 I www.lightages.com 2 LIGHTING SCIENCE HIGH PERFORMANCE LED // www.lsgc.com HIGH PERFORMANCE LED LIGHTING SOLUTIONS TABLE OF CONTENTS INTRODUCTION...
More informationBEAM SPREAD NR = Narrow (36 degree) WD = Wide (56 degree) WW 2 = Wall Wash. REFLECTOR FINISH SD = Semi- Diffused
Lumination LED Luminaires Retrofit Commercial Downlight LED LRC Series Product Description: Convert any commercial or industrial downlight to LED with the new Lumination LRC Series retrofit LED downlight.
More informationNIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only)
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only) Source: 14W LED 800lm or 1000lm PRODUCT DESCRIPTION
More informationSPECFIT 8" Retrofit Downlight AD8 DIM010 UNV ADR8. Project: Part#: Type: Ex: AD8-LES-9040-DIM010-UNV-MD-ADR8-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to 2 ceiling thicknesses. Fixture with remote driver installs
More informationSPECFIT 6" Retrofit Downlight AD6 DIM010 UNV ADR6. Project: Part#: Type: Ex: AD6-LES-9040-DIM010-UNV-MD-ADR6-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to ceiling thicknesses. Fixture with remote driver installs
More informationPRODUCT SPECIFICATIONS
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT One fixture converts nearly any manufacturers incandescent, CFL or H.I.D. fixtures with a rough-in inner diameter of 7-5 /8 to 8-1 /8 diameter to high efficiency
More information3" LED SPECIFICATIONS ULTRA SHALLOW FIXED DOWNLIGHT
Small aperture LED downlight with architectural appearance housed in an ultra-shallow " above the ceiling housing. LED module and optics are modular for ease of replacement. Wood ceiling option allows
More informationRemodeler. Complete product = Frame-in kit + Adjustable light engine / Trim Order each separately
New construction Downlighting Project: Location: Cat.No: LyteCaster Remodeler Type: Lamps: Notes: Qty: Round adjustable Philips Lightolier LyteCaster LED Adjustable Downlight is a low cost solution for
More informationCylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
More informationNOVA SUSPENSION DOWNLIGHT WITH POWER - END FEED
Shown without Louver Description Nova Power Suspension Downlight with a 24VDC power supply in the canopy is a linear LED fixture that offers direct light in a clean, contemporary style. Nova is available
More informationCIRRUS CEILING SQUARE 1 WITH REMOTE POWER
Diffused Square 1 (Actual Size) Description Cirrus Ceiling S1 is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus is available in various increments from 12" to 720"
More informationProject. Comments. Prepared by
DESCRIPTION Recessed 6-inch LED wall washer is available in various lumen and CRI/CCT options. Suitable for commercial construction and can be used for both new or renovation work. Insulation must be kept
More informationRemodeler. Complete product = Frame-in kit + Light engine + Trim Order each separately. E ELV dimming 1 120V VA Version A 2 Z V
New construction Downlighting Project: Location: Cat.No: LyteCaster Remodeler Type: Lamps: Notes: Qty: Round downlight Philips Lightolier LyteCaster LED Downlights are ideal general purpose downlighting
More informationProject. Comments. Prepared by
DESCRIPTION Recessed 6-inch LED wall washer is available in various lumen and CRI/CCT options. Suitable for commercial construction and can be used for both new or renovation work. Insulation must be kept
More informationCylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
More informationThe HLB SeleCCTable LED Series provides continuous dimming with reverse or forward phase cut dimmers.
HLB SeleCCTable Ultra-thin Downlight Dimming Guide and Step-down Transformer Application Note HALO The HLB SeleCCTable LED Series provides continuous dimming with reverse or forward phase cut dimmers.
More information