Nova Reproduction Dash Pads

Transcription

1 Nova Reproduction Dash Pads These reproduction dash pads from OER are produced with state-of-the-art urethane materials, featuring correct molded stitched seams and grain pattern for each year, providing an OEM appearance with superior durability. While early model dash pads used fiberglass backing which warp and crack easily in high temperatures, modern urethane is heat resistant and flexible. Furthermore, urethane dash pads can be painted the desired color with OER interior paint products. Officially licensed by general motors. Manufactured in the USA. Manufactured by OER 100% Satisfaction Guaranteed! Manufactured with Urethane Materials Available for models B1642W Steel Dash Panel On Chevy II/Nova models the upper dash panel is especially notorious for rusting out where the windshield meets the dash. Replace your rusty original steel dash with this reproduction steel dash panel. OS2 Note: Shipped double oversize. B EDP coated ea B1642W Weld-Thru TM ea with AC ea without AC ea Chevy II/Nova Dash Pad Make your dash look new again! Reproduction padded dash for your Chevy II/ Nova manufactured using urethane materials for an original fit and appearance. Unlike vinyl materials, urethane dash pads may be painted to the desired color by using OER interior paint instead of vinyl dye. Always use a urethane primer before spraying the dash. Do not use any chemical agents to clean the dash before priming. Note: Shipped oversize. OS black ea black ea black ea black without AC ea black with AC ea Upper Dash Panel One of the most commonly rusted areas of your Chevy II/Nova model is the upper dash panel. This weld-in upper dash panel unit replaces the dash pad mounting areas, VIN plate, speaker, and defrost vent cutout areas, but will require fabrication at the windshield/cowl panel area. Some modifications are required. Finished in EDP black coating. OS2 Note: Shipped double oversize. C ea 03161B Dash & Console Components B W Nova Dash Pad When purchasing reproduction parts and accessories from Classic Industries, you can be sure that each and every product displaying the Restorer s Choice TM symbol is manufactured correctly to exact specifications, fits the way the factory intended and is your assurance of quality. This vinyl wrapped dash pad featuring a Madrid grain vinyl vacuum formed over a foam core center with a rigid back allowing the dash pad to install correctly while offering an original appearance. Features a recessed pocket on passenger side for the Nova dash pad emblem. Installs as original and included correct mounting hardware. Made in USA. Note: Shipped oversize. OS black with AC ea W black without AC ea Nova Dash Pad A Reproduction dash pads for Nova models. Each vinyl wrapped dash pad is manufactured with either an OE steel core structure or an ABS core and molded urethane padding as original. Offered in black, but can be painted to match your original color using OER interior paint. Note: Shipped oversize. *Includes $ refundable core charge. OS1 OEM Steel Core Pads A * with AC ea A * without AC ea ABS Plastic Core Pads A with AC ea A without AC ea black dk blue med blue red dk red tan saddle Polyester Low Pile Carpeted Dash Protector When your car is in the sun or in extreme cold temperatures, the dash pad can become cracked, warped or faded. These dash protectors will combat the damaging effects of the sun, reduce dangerous sun glare and enhance your vehicle's interior. Produced from a 100% solution dyed polyester low pile carpet material. Each cover is contoured to the shape of the dashboard to ensure a protective fit. Available in your choice of a variety of popular colors to match or accent your interior! Note: Specify color when ordering Chevy II/Nova ea ea Chevy II/Nova ea Nova with AC ea without AC ea Nova Concours with AC ea without AC ea Nova specify color ea Dash Pad Clip Set Reproduction of the original Nova dash pad clips. Each clip is manufactured to exact specifications. Clips are manufactured with spring steel as original. Set includes 4 clips set 64 Reproduction Dash Pads Toll Free Order Line

2 Nova Instruments Instrument Cluster Bezel A high quality reproduction instrument cluster bezel for Chevy II/Nova models. Manufactured to exact specifications and Officially Licensed by General Motors bezel ea Instrument Cluster Lens Quality reproduction instrument cluster lens for Chevy II/Nova models. This precision lens will replace the original lens allowing a clear view of the gauges lens ea Chevy II/Nova Speedometer A high-quality reproduction speedometer for Chevy II/Nova models without speed warning. Speedometer face is designed to duplicate the original in every detail. Correctly calibrated and ready to install. Features turn signal indicators and warning light provision as shown. The silk screened speedometer numbers feature correct numeration and coloration w/o speed warning ea Nova Dash Bezel Quality reproduction of the Chevy II/Nova dash bezel. Reproduced to exact specifications and designed to replace the original dash bezel black dash bezel ea chrome dash bezel ea Dash Lens Quality reproduction of the Chevy II/Nova dash lens. Each lens will replace the faded or worn out original dash lens ea Speedometer Without Console Gauges & Tach Available for all Nova models without speed warning, this speedometer fits models without console gauges and tachometer. OER reproduction is manufactured to factory specifications and will replace the original exactly. On models without console gauges, the speedometer also housed the fuel gauge on the left side. On console gauge models, the left opening housed a tachometer ea Billet Aluminum Dash Insert Install these polished billet aluminum dash inserts on your Chevy II and give it that one-of-a-kind custom look. These solid billet inserts are manufactured from CNC-machined, polished aluminum and features a ball milled finish. These are show quality pieces that accept various aftermarket gauges for the hole sizes listed. Note: Will work on 1962 models but must use instrument bezel Gauges Mount From Rear B8509 one 3-3/8" & four 2-1/16" holes ea Gauges Mount From Front B8503 one 3-1/8" & four 2-1/16" holes ea B8505 two 3-3/8" holes ea Nova Dash Bezel B8509 N Reproduction instrument cluster bezel for all Nova models. Manufactured in black injection molded ABS plastic with chrome trim as original and features the correct FASTEN SEAT BELTS red lens. Available for models with and without air conditioning and models with or without warning lights. Models with AC N w/warning lights ea N w/o warning lights ea Models without AC N w/warning lights ea N w/o warning lights ea Dash Instrument Cluster Lens Renew the look of your Nova s instrument panel by replacing the dull or scratched instrument lens with this top quality reproduction. For all Chevrolet Nova models, this ultra clear plastic lens is sure to beautify your interior while giving you a clear view of your Nova s instrumentation ea SS517W Fits in the location of the original clock just to the right of the speedometer for a factory look! In-Dash Tachometer Conversion Kit Add a factory-looking in-dash tachometer to your Nova with this top quality made in USA conversion kit. This beautiful 7000 RPM tachometer installs right into your existing dash cluster by replacing the clock or filling in the blank opening on the right hand side of the dash instrument panel. This conversion kit comes complete with instructions and will be a great addition to your 6 or 8 cylinder Nova. SS517G green numbers ea SS517W white numbers ea Speedometer with Console Gauges and Tach Available for all Nova models without speed warning, this speedometer fits models with console gauges and tachometer. OER reproduction is manufactured to factory specifications and will replace the original exactly. On models without console gauges, the speedometer also housed the fuel gauge on the left side. On console gauge models, the left opening housed a tachometer ea Fits in the location of the original clock between the speedometer and gauge cluster! In-Dash Tachometer Conversion Monitor your engine s output by adding a top quality, made in USA, 7000 RPM tachometer to your Chevy II/Nova. This tachometer installs right into your existing dash cluster by replacing the clock or filling in the blank opening in the center of the dash instrument panel. This conversion comes complete with instructions and is sure to be a great addition to your 4, 6 or 8 cylinder model. Note: Will function with HEI distributor, but not MSD systems. SS ea Dash & Console Components B Dash Instruments 65

3 Nova Instruments Quality reproductions designed to duplicate the original in every detail! Correct Reproduction of the Speedometer Reproduction 4 in 1 gauge assembly! Fuel, Battery, Oil & Temperature all in one! Speedometer A quality reproduction 120 MPH speedometer for Chevy II/Nova models. Speedometer face is designed to duplicate the original in every detail. Correctly calibrated and ready to install. The silk screened speedometer numbers feature correct numeration and coloration ea Nova SS Instruments A high-quality reproduction instrument gauge cluster for Chevy II/Nova SS models. Includes: fuel, oil, temp and battery gauges in one cluster. Each gauge is manufactured to exact factory specifications. Replace the old, worn out gauge with this all new OER reproduction gauge cluster ea Fuel Gauge/Warning Lights Reproduction standard dash fuel gauge for Chevy II/Nova models. Each gauge includes the temp, generator, and oil warning lights as shown. Correct in every detail fuel gauge ea fuel gauge ea Correct Reproduction of the 1965 Speedometer Reproduction 4 in 1 gauge assembly! Fuel, Battery, Oil & Temperature all in one! Super Sport Gauge Resistor This is a reproduction resistor for Nova Super Sport models with the in-dash SS gauge package. This resistor mounts under the hood and is required for correct operation of the gauges Super Sport ea Dash & Console Components B 1965 Speedometer Reproduction 120 MPH speedometer for 1965 Chevy II/Nova. Speedometer face is designed to duplicate the original in every detail. Correctly calibrated and ready to install. The silk screened speedometer numbers feature correct numeration and coloration ea 1965 Nova SS Instrument Gauges A high-quality reproduction instrument gauge cluster for 1965 Chevy II/Nova SS models. Includes: fuel, oil, temp and battery gauges in one cluster. Each gauge is manufactured to exact factory specifications gauge cluster ea Chevy II/Nova Clock Reproduction clock for Chevy II/Nova models. Manufactured with quartz movement for accuracy. Completely redesigned offering the best of quartz technology while maintaining a cosmetically correct appearance ea 66 Instrument Gauges Toll Free Order Line

4 Instrument & Gauge Parts Fuel Gauge Reproduction standard fuel gauge for Nova models. This in-dash fuel gauge is designed to replace the original factory gauge. Completely ready-toinstall, each gauge is manufactured to exact factory specifications. Officially Licensed by General Motors ea In-Dash Fuel Gauge Nova models without console gauges used this in-dash fuel gauge. This OER reproduction is manufactured to original factory specifications and is calibrated and ready-to-install ea face and knob detail In-Dash Clock This OER reproduction clock is manufactured to factory specifications and features correct markings and a quartz movement for accuracy. Replace your broken or missing original or install this optional clock in any Nova ea SS507 SS507 back view Gauge Conversion This gauge set replaces the original fuel gauge and clock (or blank) with a set of original-styled gauges to monitor voltage, fuel level, coolant temperature, and oil pressure. Installs into the existing openings in your original gauge housing. Includes a temperature sending unit, oil line and fittings, and complete instructions. Available with either a standard oil pressure gauge with a 30 psi mid-range, or a high oil pressure gauge with a 60 psi mid-range and 100 psi maximum. Made in the USA. SS w/standard oil gauge set SS507H w/hi. press. oil gauge set In-Dash Tach Available for Nova models with console gauges, this tachometer fits V8 models except /325HP or 396. OER reproduction is manufactured to factory specifications and will replace the original exactly. Mounts in the left opening of the speedometer. If you are adding gauges and tach to a model not equipped originally with these options, you ll need to replace your speedometer with part # This tachometer features 7000 RPM range with 5000 RPM redline exc. 327/325HP, ea ea Chevy II/Nova Tachometer Reproduction in-dash tachometer for Chevy II/Nova models. Includes installation wiring and instructions. Make your dash look new again by adding or replacing the original tachometer V ea cylinder ea Clock Plate models without a dash mounted clock used this plate to cover the opening on the right side of the speedometer. This OER reproduction is stamped to factory specifications and features correct raised markings for Includes mounting plate. Note: This item differs slightly in appearance than the original cover plate, but will fit and function as original Novas featured the same markings without the Nova script ea Dixco Style Hood Tachometer These Dixco style 8000 RPM tachometers were installed by builders for super car vehicles such as Yenko, Baldwin Motion, and Big Daddy Garlits. Fits all cars. This tachometer works with factory points and GM HEI distributors. Note: Tachometer adaptor required for aftermarket ignitions. A all ea S Quartz Clock Conversion Rebuild your non-working original dash or console mounted clock movement with state-of-the-art components. Clocks with a vintage factory style movement are a thing of the past. This unique clock designed for the do-it-yourselfer makes it a simple task requiring a few ordinary hand tools. Each clock contains a quartz conversion movement, mounting hardware, several wheels and detailed instructions. For clocks manufactured by Borg. S ea T ea Chevy II/Nova Instrument Cluster Lens Plug Reproduction instrument cluster lens plug for Chevy II/Nova models without a clock plug ea Instrument Gauges 67 Dash & Console Components B

5 Instrument & Gauge Parts A A Instrument Cluster LED Upgrade Set Replace the stock bulbs in your instrument cluster with direct replacement, super bright LEDs. These LEDs operate 75% cooler than traditional bulbs and bring crisp, vibrant light to your dash. Each 1/2" bulb features 5 light emitting diodes for 360 degree illumination. Installation is easy, just twist out your old bulb sockets and twist the new LEDs into your cluster. Fits select Camaro, Firebird, Nova, and Impala models. These dimmable LEDs are available in white, red, green and blue for bright vibrant gauge illumination. Sets include: 6 LED lamp assemblies. Note: Please verify that your printed circuit/cluster accepts 1/2" bulb sockets. A white 6 piece set A red 6 piece set A green 6 piece set A blue 6 piece set CX Instrument Cluster Lamp Socket Instrument cluster lamp bayonet style sockets for general use from A /8" GM ea CX1807 5/8" repro with bulb ea A /8" reproduction ea Printed Circuit Reproduction printed circuits are manufactured to exact factory specifications and install directly to the back of your instrument panel. Available for Chevy II/Nova models all ea w/warning lights ea with gauges ea w/warning lights ea with gauges ea Instrument Panel Gauge Bulb Replacement instrument panel gauge bulb for Chevy II/Nova models ea ea ea ea ea SP1501 U-Cut-To-Fit Speedometer Cable Cables feature machined aluminum fittings and a premium housing with a specially extruded liner to extend the life of the cable. These cut-to-fit 7' speedometer cables are designed to work with factory speedometers with a 5/8"-18 male thread, or any cable driven aftermarket speedometers such as AutoMeter, Stewart Warner or VDO. The transmission end is designed to fit most transmission driven gear adaptors (not included), and the inner cable and outer housing of these cables can be cut to fit most GM transmissions. SP1501 stainless steel housing ea SP1500 black housing ea Dash & Console Components B 1968 Instrument Cluster Ground Wire Ground wire for instrument cluster on 1968 Nova models. Ground wire runs from back of instrument cluster and grounds to pedal bracket assembly. NV ea Universal Tachometer Filter Eliminate tach signal noise and surges caused by your ignition system with this compact and easy-to-install tachometer filter. This filter installs between the tachometer and the signal source and modifies the sharp up and down spikes into a semi-square wave signal for steady readings and faster response. This tachometer filter can be used as a direct replacement for GM vehicles. Measures: 2" x 0.75" x 1". Includes instructions. Important: Recommended for vehicles running an HEI ignition with a tachometer designed for points style ignitions. MG ea Instrument Panel Gauge Bulb These original replacement gauge bulbs will replace your originals. They are 14 volts, the 168 bulb has 4.90 watts and 3.00 candle power, the 194 bulb has 3.78 watts and 2.00 candle power and both feature a glass wedge style base. For use on all instrument panel gauges ea ea Sport Comp Dash Wire Harness Designed for the ABS dash panels with AutoMeter Sport Comp gauges, this harness is ready to integrate into your underdash harness. Includes: complete wiring for fuel, amp and tachometer, plus, panel illumination and LED lamps for turn signal, parking brake and high beam indicators. Wire Harness with LED Indicator Set set LED Indicator Set Only set Thread-On Lower Speedo Cable Quality reproduction speedometer cables for Chevy II/Nova models. They feature correct fittings, crimp ends, casing and cable. Complete and ready to install " ea " ea " ea 68 Instrument & Gauge Parts Toll Free Order Line Four-Speed Speedometer Cable Clip Originally used on cars with factory installed 4-speed transmissions, this unique retainer clip is used to hold the speedometer cable onto the firewall transmission tunnel. HC speed ea

6 Instrument & Gauge Parts " Long Push-On Speedo Cable This speedometer cable is manufactured as original. It is a push-on design and measures 69" in length. It fits manual 4-speeds or Powerglide automatics, all models, manual 3-speeds, and all models ea Speedometer Cable Retainer Clip Reproduction of the speedometer cable retainer clip for models. This metal clip secures the speedometer cable to the back of the speedometer ea Speedometer Drive Gear Clip For use with manual or automatic transmissions. G ea G8795 G8797 G8095 G8796 G8096 G8097 G G Speedo Cable Grommet OER reproduction firewall grommet installed where the speedometer cable runs through the firewall on Nova models. Measures 1-1/2" o.d. with a 5/16" center hole. Officially Licensed as GM Restoration Parts ea G Delco Speedometer Cables Replace your original speedometer cable with these genuine AC Delco replacements. Originality in all aspects of your restoration is important. Why replace your original cables with aftermarket generic cables that may or may not fit your application when the OEM cables are available. You ll be glad you did once you install it. G " ea G /2" ea G speed, 84" ea G speed, 84" ea speed, 21" ea speed, 21" ea G " ea G " ea G AT, w/cruise 84" ea G " ea Speed Sensor A speed sensor is an electrical device that can sense the rotational speed of a shaft or member and transmit this information to another device, such as a speedometer or ABS computer. 4 Pulse, 7/8" late TPI & early LT1 systems ea A A A Speedometer Gear Housings Reproduction speedometer gear housings for Powerglide, TH350 and TH400 transmissions. Each housing is manufactured as original in either steel or aluminum. Includes the speedometer gear shaft seals. Important: Please verify speedometer gear housing diameter prior to ordering. PG/TH350 Transmission Steel 7/8" Diameter Speedo Gear Housing A teeth 7/8" diameter ea TH350 Transmission Aluminum 2" Diameter Speedo Gear Housing A teeth aluminum ea A teeth aluminum ea TH400 Transmission Aluminum 2" Diameter Speedo Gear Housing A teeth aluminum ea A teeth aluminum ea Speedometer Driven Gear Classic Industries offers these speedometer driven gears for the models listed below. Each gear will replace the original worn out or damaged gear as intended. G tooth purple ea G tooth brown ea G tooth natural ea G tooth blue ea G tooth red ea G tooth green ea G tooth silver ea tooth black ea G tooth yellow ea tooth light green ea tooth red ea tooth blue ea tooth brown ea tooth green ea tooth dark gray ea tooth light blue ea Dash & Console Components B Instrument & Gauge Parts 69

7 Resto-Mod Gauge Panels Your Choice of 11 Gauge Styles... SPORT-COMP Phantom ULTRA-LITE Carbon Fiber Phantom II SPORT-COMP II ULTRA-LITE II COBALT C2 ES AMERICAN MUSCLE back view with gauges in place Dash & Console Components B Piece Style Panel 120 MPH Speedo SPORT-COMP 8k RPM 30Ω fuel kit SPORT-COMP 8k RPM 90Ω fuel kit SPORT-COMP 8k RPM 90Ω fuel kit 160 MPH Speedo ULTRA-LITE 10k RPM 30Ω fuel kit Phantom 10k RPM 30Ω fuel kit AM. MUSCLE 8k RPM 90Ω fuel kit SPORT-COMP II 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit II Phantom 10k RPM 90Ω fuel kit Phantom 10k RPM 90Ω fuel kit II Carbon Fiber 10k RPM 90Ω fuel kit COBALT 10k RPM 90Ω fuel kit C2 10k RPM 90Ω fuel kit ES 10k RPM 90Ω fuel kit AM. MUSCLE 8k RPM 90Ω fuel kit SPORT-COMP II 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit II Phantom 10k RPM 90Ω fuel kit Phantom 10k RPM 90Ω fuel kit II Carbon Fiber 10k RPM 90Ω fuel kit COBALT 10k RPM 90Ω fuel kit Six Gauge Custom ABS Panels These molded ABS panel include 3-3/8" Speedo and Tach, 2-1/16" Oil Pressure, Water Temp, Fuel Level and Volt gauges. Important: SPORT-COMP gauge sets feature mechanical gauges (except Tach, Fuel and Volt) and do not include a wire harness or LED indicators. Note: Specify panel fi nish with the suffi x 1 for black, 2 for brushed aluminum, 4 for carbon fi ber Piece Style Panel Continued 160 MPH Speedo C2 10k RPM 90Ω fuel kit ES 10k RPM 90Ω fuel kit 6 Hole Panel without Gauges panel only ea panel only ea 2 Piece Style Panel 120 MPH Speedo SPORT-COMP 8k RPM 30Ω fuel kit SPORT-COMP 8k RPM 90Ω fuel kit 160 MPH Speedo ULTRA-LITE 10k RPM 30Ω fuel kit Phantom 10k RPM 30Ω fuel kit AM. MUSCLE 8k RPM 90Ω fuel kit SPORT-COMP II 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit ULTRA-LITE 10k RPM 90Ω fuel kit II Phantom 10k RPM 90Ω fuel kit Phantom 10k RPM 90Ω fuel kit II Carbon Fiber 10k RPM 90Ω fuel kit COBALT 10k RPM 90Ω fuel kit C2 10k RPM 90Ω fuel kit ES 10k RPM 90Ω fuel kit 2 Piece Panels without Gauges panels only ea 70 Gauge Panels Toll Free Order Line

8 Resto-Mod Gauge Panels...and 3 Dash Panel Finishes! black brushed aluminum carbon fi ber with heater/ac control & vent cutout carbon fi ber dash panel from kit Six Gauge Custom ABS Panels These molded ABS panel include 3-3/8" Speedo and Tach, 2-1/16" Oil Pressure, Water Temp, Fuel Level and Volt gauges in a 1 piece style panel. Important: SPORT-COMP gauge sets feature mechanical gauges (except Tach, Fuel and Volt) and do not include a wire harness or LED indicators. Note: Specify panel finish with the suffix 1 for black, 2 for brushed aluminum, 4 for carbon fiber. 120 MPH Speedo SPORT-COMP 8k RPM kit 160 MPH Speedo AM. MUSCLE 8k RPM kit SPORT-COMP II 10k RPM kit ULTRA-LITE 10k RPM kit ULTRA-LITE II 10k RPM kit Phantom 10k RPM kit Phantom II 10k RPM kit Carbon Fiber 10k RPM kit COBALT 10k RPM kit C2 10k RPM kit ES 10k RPM kit 6 Hole Panel without Gauges panel only ea Six Gauge Custom ABS Panels Features a 5" Speedo and Tach. Also available as a 6 hole panel without gauges. Panels have 2-1/16" Oil Pressure, Water Temp, Fuel Level and Volt gauges. Important: SPORT-COMP gauge sets feature mechanical gauges (except Tach, Fuel and Volt) and do not include a wire harness or LED indicators. Note: Specify panel fi nish with the suffix 1 for black, 2 for brushed aluminum, 4 for carbon fiber. 6 Gauge Panel without Heater/AC Control & Vent Cutouts MPH Speedometer SPORT-COMP 10k RPM kit MPH Speedometer SPORT-COMP II 10k RPM kit ULTRA-LITE 10k RPM kit ULTRA-LITE 10k RPM kit II Phantom 10k RPM kit Phantom II 10k RPM kit Carbon Fiber 10k RPM kit COBALT 10k RPM kit C2 10k RPM kit Hole Panel without Gauges panel only ea 6 Gauge Panel with Heater/AC Control & Vent Cutouts MPH Speedometer SPORT-COMP 10k RPM kit MPH Speedometer SPORT-COMP II 10k RPM kit ULTRA-LITE 10k RPM kit ULTRA-LITE 10k RPM kit II Phantom 10k RPM kit Phantom II 10k RPM kit Carbon Fiber 10k RPM kit COBALT 10k RPM kit C2 10k RPM kit Hole Panel without Gauges panel only ea MPH Speedometer SPORT-COMP 10k RPM kit MPH Speedometer SPORT-COMP II 10k RPM kit ULTRA-LITE 10k RPM kit ULTRA-LITE 10k RPM kit II Phantom 10k RPM kit Phantom II 10k RPM kit Carbon Fiber 10k RPM kit COBALT 10k RPM kit C2 10k RPM kit Hole Panel without Gauges panel only ea Dash & Console Components B Gauge Panels 71

9 Performance Instruments Dakota Digitaligital Dakota Digital igital DD1013B DD811B DD1054B DD1015B Digital Gauge Conversion These vacuum fluorescent digital conversion sets include gauges for oil pressure, water temperature, fuel level, volts charging as well as a speedometer, odometer, and tachometer. All sets are backed by a manufacturers lifetime warranty. These sets are designed to install directly into your original dash bezel for an easy installation. Bezel not included. Your choice of blue or teal digital display. Important: An optional wire harness for models is available to wire gauge set directly into factory wire harness without any modifications to the original wire harness DD1013B blue ea DD1013T teal ea DD1054B 1966 blue ea DD1054T 1966 teal ea DD1055B 1967 blue ea DD1055T 1967 teal ea DD1015B blue ea DD1015T teal ea DP8001B DP8001G DD814R DD815R Dakota Digital VHX Instruments Featuring fully lit needles, backlit faces and easyto-read LCD message centers, the VHX series is a far cry from yesterday s traditional instrumentation. Mounts directly to the stock dash housing for simple installation. The VHX series are loaded with features including micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy and user customizable display feedback. Available with three gauge face styles carbon fiber, silver alloy, or black alloy with either blue, red, or white numeration and backlighting. Note: Dash bezel not included. Please specify illumination color when ordering: B for blue, R for red, or W for white.*available with blue or red illumination only DD811* carbon fiber set DD812 silver alloy set DD833 black alloy set DD813* carbon fiber set DD814 silver alloy set DD834 black alloy set DD815* carbon fiber set DD816 silver alloy set DD835 black alloy set Dakota Digital igital Sky Drive GPS Speedometer Sender This device quickly calibrates and accurately drives any electronic programmable speedometer. The Sky Drive updates 10 times per second without any transmission signals, pulse generators or signal converters and features an omnidirectional antenna that can be mounted virtually anywhere and in any position. No more guessing or recalibrating due to tire or gear changes. This unit requires a one time setup and you re done ea Dakota Digital igital Universal Gear Indicator Sending Unit Gear shift position sending unit for use with all Dakota Digital Instrument Systems with gear shift position indicators. This unit includes: universal mounting hardware to fit Powerglide, TH350, TH400, 2004R, 700R4, 4L60, 4L60E, 4L80 and 4L80E. Can be mounted inside the vehicle for easy access and also features built-in neutral safety switch and back-up light circuit. DD ea Dash & Console Components B DP8001B DP8001G 255 MPH Speedometer with Odometer, Tripmeter, 0-60 time,1/4 mile ET, and Top Speed Recall 9900 RPM Tachometer Degree Temp Gauge DP8001R DP8001W 0-99 psi Oil Pressure Gauge Volt Voltmeter 0-99% Fuel Gauge Intellitronix Digital Instruments Looking to get a fresh, modern look for your gauge panel? The Intellitronix digital dash gives your Nova the precision of digital readouts under the elegance of a smoked gauge lens. Each set includes: a printed circuit board and smoked face plate, along with sending units for the speedometer, oil pressure and coolant temperature. This set also works with your factory fuel level sending unit. Features one button calibration regardless of tire size, gear ratio or transmission, along with 0-60 time, 1/4 mile ET and high speed recall, all with the push of a button. Dash bezel not included. Made in USA. Note: When ordering, please add the correct suffi x: B for blue, G for green, R for red, or W for white. DP specify color set DD10701 Universal Digital Gauge Set These Odyssey Series II and Odyssey Solarix digital gauges set give any plain dash an old school design with a modern digital display. These six piece sets come with speedometer, tachometer, oil pressure, water temperature, voltmeter, and fuel gauge. Includes oil pressure, water temperature and speed senders. Fuel gauge works with most OEM and aftermarket senders. Available with chrome or black bezels. Odyssey Series II Teal Display DD10701 with chrome bezels set DD10702 with black bezels set Solarix Series Bluel Display DD10703 with chrome bezels set DD10704 with black bezels set A Internal Float Fuel Sending Unit This advanced design provides accurate readings without fluctuations due to fuel slosh. Because this internal float design requires no float arm, it is far more resistant to corrosion, even with racing fuels. All sending units mount to the tank with the standard 5 bolt mounting flange and are available in sizes from 4" to 24". Important: Sending unit should not touch bottom of tank. When the fuel gauge reads empty, the area below the sending unit is reserve fuel. Note: Sending units are available in lengths from 4" to 24" and are sold in 1" increments. Please add the desired length to the end of the part number, eg. 06 = 6", 11 = 11" Ohm A " - 12" sending units ea A " - 24" sending units ea Ohm A " - 12" sending units ea A " - 24" sending units ea 72 Performance Instruments Toll Free Order Line

10 Performance Instruments Hot Rod ST7901 White Hot G-Stock Velocity White SG Velocity Black Dash Gauge Sets This electronic programmable speedometer is set up to read 140 MPH (Velocity Series 160 MPH) and the quad cluster is programmed for a stock fuel sender reading 0-30 Ohms, water temperature, oil pressure, and volts. Cluster is designed with integrated turn signals and a halo high beam indicator. All sets come equipped with water temp sender, oil pressure sender, pulse signal generator for the programmable electronic speedometer, and lens. The cluster will mount into a stock or aftermarket bezel and will use the original light diffuser. A new lens is included with each set of gauges Hot Rod set White Hot set Velocity White set Velocity Black set G-Stock set SG set ST7904 Super Tach II Super Tac II features internal dial lighting, accurate air coil meters, 250 degree dial sweep, 8000 RPM limit and adjustable red line pointer. Works on 4, 6 or 8 cylinder engines. Functions with breaker point, electronic and most aftermarket ignition systems except magnetos. Includes mounting hardware. Available in 3-3/8" or 2-5/8". 3-3/8" Super Tach II ST7901 black dial, chrome bezel ea ST7903 white dial, chrome bezel ea 2-5/8" Super Tach II ST7904 white dial, black bezel ea ST7906 black dial, black bezel ea ST7911 white dial, chrome bezel ea ST802 ST88R Retro Tachometers Carefully reproduced to match original dimensions. 360 degree lighting avoids uneven spots for better night visibility. These tachometers will put the finishing touches on your restoration project. Tachometer measures 3-3/8" and has 8000 RPM limit. Important: Tachometers operate on 1,2,4,6,8 or 10 cylinder engines with most factory or aftermarket ignition systems. ST802 full sweep w/adj. redline ea ST88R short sweep ea MG015044A MG015033B MG015035C ST8090 ST8091 ST8092 hardware included 1-1/2" Mini-Triple Gauge Set Mini gauge panels fro 1-1/2" dial gauges, mechanical oil/water temperature gauge, volt meter, mechanical oil pressure gauge. Includes: 72" capillary tubing with 5/8" NPT thread and 1/4", 3/8" and 1/2" adapters. Requires hook up wire for voltmeter. Includes 12 volt internal lighting. Designed for 12 volt negative ground systems. ST8090 black face/black panel set ST8091 white face/black panel set ST8092 white face/chrome panel set Super Tach III Solid metal casing with a striking reflective chrome finish. Features a blue shift light. The Super Tach III is fast, accurate and reliable, thanks to vibration proof air-core meter construction. 0-10,000 RPM. Internal settings for 2, 4, 6 and 8 cylinder engines. Pointer return to zero feature. Adjustable swivel mounting foot for mounting at any angle. Modern DIS applications are covered by the 2 cylinder setting. ST7905 black dial, chrome bezel ea Dakota Digital igital Panel Assembly Light Dimmer This aluminum knob and bezel works only with the Dakota Digital Instrument Systems and will not dim the Odyssey or Solarix gauges. Stock dimming switches will not work with Dakota Digital Instrument Systems. DD ea MG013092A MG015096B Marshall Instruments SCX Gauges SCX Pro gauges feature one-touch peak recall and programmable high and low full dial warning. There is also an external alarm output (12V, 500mA) that can be used to activate an external warning light when an alarm condition exists. Superior amber and white through-the-dial lighting and illuminated pointer. All SCX and SCX Pro fuel senders work with 0-90, , 73-10, and 0-30 Ohm senders. SCX Series 5" tachometers feature a slimline case design (only 2" deep). Note: *Pedestal mount. **Pedestal mount with LED shift light. SCX Pro Series Gauges MG wideband A/F ratio ea SCX Series Gauges Note: Must specify dial color suffi x SCX Series Gauges: A black, B white, C silver. MG volt ea MG vac/boost w/map sensor ea psi oil pressure ea MG MG F water temp ea MG F oil temp ea MG F trans temp ea MG psi nitrous ea MG psi fuel pressure ea programmable fuel level ea MG MG RPM 3-3/8" ea MG MPH 3 3/8" speedo ea MG * RPM 5" tach ea MG ** RPM 5" tach ea Dash & Console Components B Performance Instruments 73

11 In-Dash Speedos And Tachs Our In-Dash Speedometers and Tachometers feature our famous highperformance movements and are designed with seamless dashboard mount in mind for the ultimate driver information center. Available in a variety of configurations and sizes to accommodate diverse applications. Pedestal Mount Tachometers Mountable in every conceivable position, ULTRA-LITE gauges feature aluminum construction that greatly reduces weight while satin anodized Super Bezels and dials with black numbering and increments. Perimeter incandescent white lighting and bright red fluorescent pointers make them easy to read. Z-Series gauges feature race quality mechanisms, a black Super Bezel with black dial, white numbers and increments, bright orange pointers and perimeter incandescent lighting that make this line easy to read. ES gauges feature black satin Super Bezels and black dials with white numbering and increments, intense red through-the-dial patented LED lighting technology and glowing red pointers for superior visibility. The light intensity can be controlled through an LED Lighting Dimmer (available separately) independent of your OE dash lighting. COBALT gauges feature bright anodized Super Bezels and black dials with blue accents, white numbering and increments, cobalt blue through-the-dial patented LED lighting technology and glowing orange pointers for superior visibility. The light intensity can be controlled through an LED Lighting Dimmer (available separately) Dash & Console Components B the versatility and durability of our Pedestal Mount Tachometers have made them a race proven favorite for over 30 years. These tachometers offer a variety of performance oriented options from shift lights to memory recall functions, coupled with a trademarked aluminum and rubber shock strap design for the best vibration protection available. Full Sweep Mechanical Gauges Bronze bourdon tube 270 degree sweep movements and durable nylon gearing have made these rugged and long lasting gauges a proven high performance favorite for over 25 years. These mechanical gauges require no electrical power for operation making them an ideal choice for vehicles with no or low powered electrical systems. Full Sweep Electric Gauges Powered by digital microprocessorcontrolled, rugged stepper motor drives and laboratory grade sending units, Full Sweep Electric Gauges are the best gauges available. They combine extreme durability and readability of 270 degree sweep mechanical gauges with the easy installation and safe operation of short sweep electrics. Track tested and race proven, these units use precision senders to keep hazardous fluids out of the driver compartment and perform gauge calibration and sensor diagnostics at power up for extreme accuracy, every time. Short Sweep Electric Gauges Advanced 90 degree air core movements and three wire installation characterize these Short Sweep Electric Gauges. Electric sending units keep hazardous fluids in the engine compartment, sending collected data via an electrical signal to quick reacting, precise air core movements to give you all the information that you need. Important: Electric speedometers operate on ,000 pulse/mile sending units. Use existing sender if vehicle is originally equipped with an electric speedometer. Use AM5291 to convert from mechanical drive to electric. Tachometers operate on 4, 6, or 8 cylinder engines with most factory or aftermarket ignitions. Some fuel gauges use the vehicle s stock sending unit. Measure resistance using an ohmmeter with the sending unit fl oat in the empty and full position to determine the correct fuel gauge. Phantom II gauges feature black Super Bezels and white dials with black outlined, white numbering and black increments, through-the-dial patented LED lighting technology and glowing red pointers for superior visibility. When illuminated, the gauges display in a reverse configuration (black dial with white numbers and markings). NV gauges feature bright anodized Super Bezels and white dials with black numbering and increments, intense green full dial patented LED lighting technology and glowing orange pointers for superior visibility. Phantom gauges are race quality mechanisms featuring a subtle black bezel with stark white dials, bright orange pointers and perimeter incandescent lighting that make this extensive high-performance line easy to read with a crisp, no-nonsense modern appearance. C2 gauges feature bright anodized Super Bezels and white dials with black numbering and increments, intense blue full dial patented LED lighting technology and glowing orange pointers for superior visibility. The light intensity can be controlled through an LED Lighting Dimmer (available separately) independent of your OE dash lighting. NEXUS gauges feature a bright Super Bezel and black dial with red accent band. The lens is dark tinted for a low key appearance when off. When illuminated, the patented LED lighting technology provides lighted pointer and through-the-dial display. ULTRA-LITE II gauges feature satin anodized Super Bezels and dials with black numbering and increments, white through-thedial patented LED lighting technology and glowing red pointers for superior visibility. When illuminated, the gauges display in a reverse configuration (black dial with white numbers and amber accents). independent of your OE dash lighting. Carbon Fiber gauges give your interior the complete look of rapid acceleration even when the car isn t moving. The clean, racy look of a crisp anodized aluminum bezel, an actual carbon fiber dial face, silver pointer and yellow accents with perimeter incandescent lighting give these gauges high visibility and style for any application. SPORT-COMP II gauges feature a satin anodized Super Bezels and black dials with white numbering and increments, through-the-dial patented LED lighting technology and glowing red pointers for superior visibility. The light intensity can be controlled through an LED Lighting Dimmer (available separately) independent from your OE dash lighting. The AMERICAN MUSCLE Street Rod Series features advanced hybrid dial technology combining AutoMeter s signature white Hi-Def LED illumination and fluorescent red pointers for maximum readability. The light intensity can be controlled through the optional LED Lighting Dimmer independently of your OE dash lighting (available separately). SPORT-COMP gauges feature the trademarked competition appearance and rugged, reliable performance of a satin anodized Super Bezel with black dials with white numbers and increments, bright orange pointers and perimeter incandescent lighting that make this extensive highperformance line easy to read with a crisp, no-nonsense modern appearance. TRADITIONAL CHROME gauges feature the trademarked competition appearance and rugged, reliable performance of a chrome bezel with black dial, white numbers and increments, bright orange pointers and perimeter incandescent lighting that make this line easy to read with a crisp, no-nonsense nostalgic appearance. 74 AutoMeter Gauges Toll Free Order Line

12 3-3/8" Speedometers 120 MPH, Electronic Programmable AM5887 Phantom ea AM3987 SPORT-COMP ea AM4487 ULTRA-LITE ea 160 MPH, Electronic Programmable AM1288 AM. MUSCLE ea AM7288 C ea AM4789 Carbon Fiber ea AM6288 COBALT ea AM5988 ES ea AM7488 NV ea AM5888 Phantom ea AM7588 Phantom II ea AM3988 SPORT-COMP ea AM3688 SPORT-COMP II ea AM2489 TRADITIONAL ea AM4488 ULTRA-LITE ea AM4988 ULTRA-LITE II ea 200 MPH, Electronic Programmable AM4486 ULTRA-LITE ea 120 MPH, Mechanical AM5892 Phantom ea AM3992 SPORT-COMP ea AM2492 TRADITIONAL ea AM4492 ULTRA-LITE ea AM2692 Z-Series ea 160 MPH, Mechanical AM5893 Phantom ea AM2494 TRADITIONAL ea AM4493 ULTRA-LITE ea AM2694 Z-Series ea 5" Speedometers 160 MPH, Electronic Programmable AM7289 C ea AM4889 Carbon Fiber ea AM6289 COBALT ea AM7489 NV ea AM5889 Phantom ea AM7589 Phantom II ea AM3989 SPORT-COMP ea AM3689 SPORT-COMP II ea AM4489 ULTRA-LITE ea AM4989 ULTRA-LITE II ea Speedometer Sending Unit Speedometer sending unit for use with all AutoMeter electric speedometers. This unit is not included with the gauge packages and must be purchased separately. AM5291 sending unit ea Performance Gauges AM3375 SPORT-COMP ea 200 MPH, Electronic Programmable AM4490 ULTRA-LITE ea 120 MPH, Mechanical AM3994 SPORT-COMP ea 160 MPH, Mechanical AM5895 Phantom ea AM3995 SPORT-COMP ea AM4495 ULTRA-LITE ea 200 MPH, Mechanical AM5896 Phantom ea AM4496 ULTRA-LITE ea 3-3/8" In-Dash Tachometers 8000 RPM Electric AM1298 AM. MUSCLE ea AM3991 SPORT-COMP ea AM2499 TRADITIONAL ea AM2699 Z-Series ea 10,000 RPM, Electric AM7297 C ea AM4798 Carbon Fiber ea AM6297 COBALT ea AM5997 ES ea AM7497 NV ea AM5897 Phantom ea AM7597 Phantom II ea AM3697 SPORT-COMP II ea AM4497 ULTRA-LITE ea AM4997 ULTRA-LITE II ea 5" In-Dash Tachometers 10,000 RPM, Electric AM7298 C ea AM4898 Carbon Fiber ea AM6298 COBALT ea AM7498 NV ea AM5898 Phantom ea AM7598 Phantom II ea AM3990 SPORT-COMP ea AM3698 SPORT-COMP II ea AM4498 ULTRA-LITE ea AM4998 ULTRA-LITE II ea 10,000 RPM, Electric, with Recall AM4894 Carbon Fiber ea AM4494 ULTRA-LITE ea 10,000 RPM, Elec., Dual Range w/recall AM4499 ULTRA-LITE ea Air Pressure psi Full Sweep Mechanical, 2-1/16" Includes 10' of nylon tubing, 1/8" and 1/4" NPT fi ttings. AM4720 Carbon Fiber ea AM5720 Phantom ea AM3320 SPORT-COMP ea AM4320 ULTRA-LITE ea AM2620 Z-Series ea Air/Fuel Ratio Narrow Band Full Sweep Electric Gauges 2-1/16" If sensor is needed use AM2244 AM7175 C ea AM4775 Carbon Fiber ea AM6175 COBALT ea AM7375 NV ea AM5775 Phantom ea AM7575 Phantom II ea AM3675 SPORT-COMP II ea AM4375 ULTRA-LITE ea AM4975 ULTRA-LITE II ea AM2675 Z-Series ea Air/Fuel Ratio Wide Band Full Sweep Electric Gauges 2-1/16" AM7178 C ea AM6178 COBALT ea AM5978 ES ea AM7378 NV ea AM5778 Phantom ea AM3378 SPORT-COMP ea AM3670 SPORT-COMP II ea AM4378 ULTRA-LITE ea AM4970 ULTRA-LITE II ea Ammeter Short Sweep Electric Gauges 2-1/16" AM2586 TRADITIONAL ea AM2644 Z-Series ea Short Sweep Electric Gauges 2-5/8" AM3586 SPORT-COMP ea Amplifier Ammeter amps Full Sweep Electric Gauges 2-1/16" Includes transducer. AM6390 COBALT ea Amplifier Temperature 0º-250ºF Full Sweep Electric Gauges 2-1/16" Includes sender. AM6392 COBALT ea Blower Pressure 0-60 psi Full Sweep Mechanical, 2-5/8" Includes 10' nylon tubing, 1/8" and 1/4" NPT fi ttings. AM5802 Phantom ea AM3402 SPORT-COMP ea AM4402 ULTRA-LITE ea Boost Full Sweep Mechanical, 2-1/16" Includes 10' of nylon tubing and universal T fi tting. AM2401 TRADITIONAL 0-20 psi ea AM2403 TRADITIONAL 0-30 psi ea 0-35 psi, Full Sweep Mech. 2-1/16" AM7104 C ea AM4704 Carbon Fiber ea AM6104 COBALT ea AM5904 ES ea AM7304 NV ea AM5704 Phantom ea AM7504 Phantom II ea AM3304 SPORT-COMP ea AM3604 SPORT-COMP II ea AM4304 ULTRA-LITE ea AM4904 ULTRA-LITE II ea AM2616 Z-Series ea 0-60 psi, Full Sweep Mech., 2-1/16" AM7105 C ea AM6105 COBALT ea AM5905 ES ea AM7305 NV ea AM5705 Phantom ea AM7505 Phantom II ea AM3605 SPORT-COMP II ea AM4305 ULTRA-LITE ea AM4905 ULTRA-LITE II ea AM2617 Z-Series ea psi, Full Sweep Mech., 2-1/16" AM7106 C ea AM6106 COBALT ea AM7306 NV ea AM5706 Phantom ea AM7506 Phantom II ea AM3606 SPORT-COMP II ea AM4306 ULTRA-LITE ea AM4906 ULTRA-LITE II ea AM2618 Z-Series ea Full Sweep Electrical, 2-1/16" Includes sender, sensor and harness when required. AM7160 C psi ea AM7170 C psi ea AM6160 COBALT 0-30 psi ea AM6170 COBALT 0-60 psi ea Full Sweep Mechanical, 2-5/8" Includes 10' of nylon tubing and universal T fi tting. AM3404 SPORT-COMP 0-35 psi ea AM4404 ULTRA-LITE 0-35 psi ea Boost/Vacuum 30 in. Hg Full Sweep Mechanical, 2-1/16" Includes 10' of nylon tubing and universal T fi tting. AM7107 C2 20 psi ea AM7103 C2 30 psi ea AM7108 C2 45 psi ea AM4701 Carbon Fiber 20 psi ea AM4703 Carbon Fiber 30 psi ea AM6107 COBALT 20 psi ea AM6103 COBALT 30 psi ea AM6108 COBALT 45 psi ea AM5907 ES 20 psi ea AM5903 ES 30 psi ea AM7307 NV 20 psi ea AM7303 NV 30 psi ea AM7308 NV 45 psi ea AM5701 Phantom 20 psi ea AM5703 Phantom 30 psi ea AM5708 Phantom 45 psi ea AM7507 Phantom II 20 psi ea AM7503 Phantom II 30 psi ea AM3301 SPORT-COMP 20 psi ea AM3303 SPORT-COMP 30 psi ea AM3308 SPORT-COMP 45 psi ea AM3607 SPORT-COMP II 20 psi ea AM3603 SPORT-COMP II 30 psi ea AM4301 ULTRA-LITE 20 psi ea AM4303 ULTRA-LITE 30 psi ea AM4308 ULTRA-LITE 45 psi ea AM4907 ULTRA-LITE II 20 psi ea AM4903 ULTRA-LITE II 30 psi ea AM2601 Z-Series 20 psi ea AM2614 Z-Series 30 psi ea Full Sweep Electrical, 2-1/16" Note: *With peak and warning. AM7159 C2 30 psi ea AM4776 * Carbon Fiber 15 psi ea AM4777 * Carbon Fiber 30 psi ea AM6159 COBALT 30 psi ea AM5959 ES 30 psi ea AM7359 NV 30 psi ea AM5776 Phantom 15 psi ea AM5777 Phantom 30 psi ea AM7559 Phantom II 30 psi ea AM3376 SPORT-COMP 15 psi ea AM3377 SPORT-COMP 30 psi ea AM3659 SPORT-COMP II 30psi ea AM4376 ULTRA-LITE 15 psi ea AM4377 ULTRA-LITE 30 psi ea AM4959 ULTRA-LITE II 30 psi ea Full Sweep Mechanical, 2-5/8" Includes 10' of nylon tubing and universal T fi tting. AM4801 Carbon Fiber 20 psi ea AM4803 Carbon Fiber 30 psi ea AM7901 COBALT 20 psi ea AM7908 COBALT45 psi ea AM5801 Phantom 20 psi ea AM5803 Phantom 30 psi ea AM7801 Phantom II 20 psi ea AM7808 Phantom II 45 psi ea AM3401 SPORT-COMP 20 psi ea AM3403 SPORT-COMP 30 psi ea AM7601 SPORT-COMPII 20 psi ea AM7608 SPORT-COMP II 45 psi ea AM4401 ULTRA-LITE 20 psi ea AM4403 ULTRA-LITE 30 psi ea AM7701 ULTRA-LITE II 20 psi ea AM7708 ULTRA-LITE II 45 psi ea Full Sweep Electrical, 2-5/8" Includes MAP sensor, universal T fi tting and 8' wiring harness. AM4477 with peak and warning. AM5877 Phantom 30 psi ea AM4477 ULTRA-LITE 30 psi ea Dash & Console Components B AutoMeter Gauges 75

13 Performance Gauges AMERICAN MUSCLE C 2 Series Carbon Fiber COBALT ES Series Nexus NV Series Dash & Console Components B Brake Pressure Full Sweep Mechanical, 2-5/8" Includes T fi tting, 3'8" o.d. c 1/8"-27 NPT fi tting. Use only approved brake lines. AM4426 Pro Comp psi ea Full Sweep Electrical, 2-5/8" Includes T fi tting, 3'8" o.d. c 1/8"-27 NPT fi tting. Use only approved brake lines. AM4867 Carbon Fiber psi ea Clock Full Sweep Electrical, 2-1/16" Quartz movement with second hand. AM5785 Phantom ea AM2585 TRADITIONAL ea AM4385 ULTRA-LITE ea AM2632 Z-Series ea Full Sweep Electrical, 2-5/8" Quartz movement with second hand. AM5885 Phantom ea AM3585 SPORT-COMP ea AM4485 ULTRA-LITE ea Cylinder Head Temp F Short Sweep Electrical, 2-1/16" Includes 1/8" NPT sender. AM3336 SPORT-COMP ea AM4336 ULTRA-LITE ea Short Sweep Electrical, 2-5/8" Includes 1/8" NPT sender. AM3536 SPORT-COMP ea Differential Temp F Short Sweep Electrical, 2-1/16" Includes 1/8" NPT sender. AM5749 Phantom ea AM3349 SPORT-COMP ea AM4349 ULTRA-LITE ea Fuel Level 0 Ω empty/30 Ω full Short Sweep Electrical, 2-1/16" AM5717 Phantom ea AM3317 SPORT-COMP ea AM2517 TRADITIONAL ea AM4317 ULTRA-LITE ea AM2648 Z-Series ea Short Sweep Electrical, 2-5/8" AM3517 SPORT-COMP ea AM4417 ULTRA-LITE ea Fuel Level 0 Ω empty/90 Ω full Short Sweep Electrical, 2-1/16" AM1214 AM. MUSCLE ea AM7113 C ea AM4714 Carbon Fiber ea AM6113 COBALT ea AM5913 ES ea AM1114 MCX ea AM7313 NV ea AM5714 Phantom ea AM7513 Phantom II ea AM3314 SPORT-COMP ea AM3613 SPORT-COMP II ea AM2514 TRADITIONAL ea AM4314 ULTRA-LITE ea AM4913 ULTRA-LITE II ea AM2641 Z Series ea Short Sweep Electrical, 2-5/8" AM4814 Carbon Fiber ea AM7914 COBALT ea AM5814 Phantom ea AM7814 Phantom II ea AM3514 SPORT-COMP ea AM7614 SPORT-COMP II ea AM4414 ULTRA-LITE ea AM7714 ULTRA-LITE II ea Fuel Level 0 Ω empty/280 Ω full Full Sweep Electrical, 2-1/16" AM7114 C ea AM6114 COBALT ea AM5910 ES ea AM7310 NV ea AM5710 Phantom ea AM7510 Phantom II ea AM3310 SPORT-COMP ea AM3610 SPORT-COMP II ea AM4310 ULTRA-LITE ea AM4910 ULTRA-LITE II ea Fuel Level 240 Ω empty/33 Ω full Short Sweep Electrical, 2-1/16" Use AM3262 sender. AM1217 AM. MUSCLE ea AM7116 C ea AM4716 Carbon Fiber ea AM6116 COBALT ea AM5916 ES ea AM7316 NV ea AM5716 Phantom ea AM7516 Phantom II ea AM3316 SPORT-COMP ea AM3616 SPORT-COMP II ea AM2516 TRADITIONAL ea AM4316 ULTRA-LITE ea AM4916 ULTRA-LITE II ea AM2643 Z Series ea Short Sweep Electrical, 2-5/8" Use AM3262 sender. AM4816 Carbon Fiber ea AM7916 COBALT ea AM5816 Phantom ea AM7816 Phantom II ea AM3516 SPORT-COMP ea AM7616 SPORT-COMP II ea AM4416 ULTRA-LITE ea AM7716 ULTRA-LITE II ea Fuel Pressure 0-15 psi Full Sweep Mechanical, 2-1/16" Carbureted, requires #4 braided line and mounting cup and must be mounted outside of vehicle. Note: *Includes isolator and 4' line. AM4711 Carbon Fiber ea AM3311 SPORT-COMP ea AM2411 TRADITIONAL ea AM2413 * TRADITIONAL ea AM4311 ULTRA-LITE ea AM4313 * ULTRA-LITE ea AM2603 Z Series ea Full Sweep Electrical, 2-1/16" Carbureted. Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM7162 C ea AM6162 COBALT ea AM7362 NV ea AM5761 Phantom ea AM3361 SPORT-COMP ea AM4367 * ULTRA-LITE ea AM4961 ULTRA-LITE II ea AM2661 Z-Series ea Full Sweep Mechanical, 2-5/8" Carbureted, requires #4 braided line and mounting cup and must be mounted outside vehicle. Note: *Includes isolator and 4' line. Requires braided line to fuel source. AM4811 Carbon Fiber ea AM4813 * Carbon Fiber ea AM7911 COBALT ea AM5810 Phantom ea AM5813 * Phantom ea AM7811 Phantom II ea AM3411 SPORT-COMP ea AM3413 * SPORT-COMP ea AM7611 SPORT-COMP II ea AM4411 ULTRA-LITE ea AM4413 * ULTRA-LITE ea AM7711 ULTRA-LITE II ea Full Sweep Electrical, 2-5/8" Carbureted. Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM7961 COBALT ea AM7861 Phantom II ea AM3561 SPORT-COMP ea AM7661 SPORT-COMP II ea AM4470 * ULTRA-LITE ea AM7761 ULTRA-LITE II ea Fuel Pressure 0-30 psi Full Sweep Electrical, 2-1/16" Fuel injected. Includes 1/8" NPT sender and 8' wiring harness. AM6161 COBALT ea AM5760 Phantom ea AM4360 ULTRA-LITE ea AM2660 Z Series ea Fuel Pressure psi Full Sweep Mechanical, 2-1/16" Fuel injected. Requires #4 braided line and mounting cup and must be mounted outside of vehicle. AM4712 Carbon Fiber ea AM5712 Phantom ea AM3312 SPORT-COMP ea AM2412 TRADITIONAL ea AM4312 ULTRA-LITE ea AM2612 Z Series ea Full Sweep Electrical, 2-1/16" Fuel injected. Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM7163 C ea AM4763 Carbon Fiber ea AM6163 COBALT ea AM5963 ES ea AM7363 NV ea AM5763 Phantom ea AM7563 Phantom II ea AM3363 SPORT-COMP ea AM3663 SPORT-COMP II ea AM4363 ULTRA-LITE ea AM4371 * ULTRA-LITE ea AM4963 ULTRA-LITE II ea AM2663 Z Series ea Full Sweep Mechanical, 2-5/8" Fuel injected. Requires #4 braided line and mounting cup and must be mounted outside of vehicle. AM4812 Carbon Fiber ea Full Sweep Electrical, 2-5/8" Fuel injected. Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM4863 Carbon Fiber ea AM7963 COBALT ea AM5863 Phantom ea AM7863 Phantom II ea AM3563 SPORT-COMP ea AM7663 SPORT-COMP II ea AM4472 * ULTRA-LITE ea AM7763 ULTRA-LITE II ea Hour Meter Short Sweep Electrical, 2-1/16" Non-resettable w/quartz accuracy for up to 100,000 hours. AM2587 TRADITIONAL ea Nitrous psi Full Sweep Mechanical, 2-1/16" Requires #4 braided line. AM4728 Carbon Fiber ea Full Sweep Electrical, 2-1/16" Includes 1/8" NPT sender and 8' wiring harness. AM7174 C ea AM4774 Carbon Fiber ea AM6174 COBALT ea AM5974 ES ea AM7374 NV ea AM7574 Phantom II ea AM3374 SPORT-COMP ea AM3674 SPORT-COMP II ea AM4374 ULTRA-LITE ea AM4974 ULTRA-LITE II ea Full Sweep Electrical, 2-5/8" Includes 1/8" NPT sender and 8' wiring harness. AM7974 COBALT ea AM7874 Phantom II ea AM3574 SPORT-COMP ea AM7674 SPORT-COMP II ea AM4474 ULTRA-LITE ea AM7774 ULTRA-LITE II ea Nitrous psi Full Sweep Mechanical, 2-1/16" Requires #4 braided line. AM5728 Phantom ea AM3328 SPORT-COMP ea AM4328 ULTRA-LITE ea Full Sweep Mechanical, 2-5/8" Requires #4 braided line. AM4828 Carbon Fiber ea AM5828 Phantom ea AM3428 SPORT-COMP ea AM4428 ULTRA-LITE ea Oil Pressure Full Sweep Mechanical, 2-1/16" Includes 10' nylon tubing, 1/8" and 1/4" NPT fittings. All Oil Pressure gauges measure in psi. AM7121 C psi ea Fuel Tank Sender This universal type fuel sender is used with gauges that require 240Ω empty and 33Ω full and can be adjusted for tanks from 5" to 24" deep. AM3262 fuel sender ea 76 AutoMeter Gauges Toll Free Order Line

14 Performance Gauges Phantom Phantom II SPORT-COMP SPORT-COMP II TRADITIONAL CHROME ULTRA-LITE ULTRA-LITE II Z Series AM4721 Carbon Fiber, ea AM6121 COBALT, ea AM5921 ES, ea AM7321 NV, ea AM5721 Phantom, ea AM5723 Phantom, ea AM7521 Phantom II, ea AM3321 SPORT-COMP ea AM3323 SPORT-COMP, ea AM3322 SPORT-COMP, ea AM3621 SPORT-COMP II ea AM2421 TRADITIONAL ea AM2422 TRADITIONAL ea AM4321 ULTRA-LITE, ea AM4323 ULTRA-LITE, ea AM4322 ULTRA-LITE, ea AM4921 ULTRA-LITE II, ea AM2604 Z-Series, ea AM2605 Z-Series, ea Full Sweep Electrical, 2-1/16" Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM7153 C2, psi ea AM6153 COBALT, ea AM5953 ES, ea AM6453 Nexus, ea AM7353 NV, ea AM7553 Phantom II, ea AM3653 SPORT-COMP II, ea AM4352 * ULTRA-LITE, ea AM4953 ULTRA-LITE II, ea Full Sweep Mechanical, 2-5/8" Includes 10' nylon tubing, 1/8" and 1/4" NPT fi ttings. AM4821 Carbon Fiber, psi ea AM7921 COBALT, ea AM5821 Phantom, ea AM5823 Phantom, ea AM5822 Phantom, ea AM7821 Phantom II, ea AM3421 SPORT-COMP, ea AM3423 SPORT-COMP, ea AM3422 SPORT-COMP, ea AM7621 SPORT-COMP II, ea AM4421 ULTRA-LITE, ea AM4423 ULTRA-LITE, ea AM4422 ULTRA-LITE, ea AM7721 ULTRA-LITE II, ea Full Sweep Electrical, 2-5/8" Includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM7953 COBALT, psi ea AM7853 Phantom II, ea AM7653 SPORT-COMP II ea AM4452 * ULTRA-LITE, ea AM7753 ULTRA-LITE II, ea Short Sweep Electrical, 2-1/16" Includes 1/8" NPT sender and 1/4" NPT fi tting. AM1226 AM. MUSCLE psi ea AM7127 C2, ea AM4727 Carbon Fiber, ea AM6127 COBALT, ea AM5927 ES, ea AM1127 MCX, psi ea AM7327 NV, ea AM5727 Phantom, ea AM7527 Phantom II, ea AM3327 SPORT-COMP, ea AM3627 SPORT-COMP II, ea AM2522 TRADITIONAL, ea AM4327 ULTRA-LITE, ea AM4927 ULTRA-LITE II, ea AM2634 Z Series, ea Short Sweep Electrical, 2-5/8" Includes 1/8" NPT sender and 1/4" NPT fi tting. AM4827 Carbon Fiber, psi ea AM7927 COBALT, ea AM5827 Phantom, ea AM7827 Phantom II, ea AM3522 SPORT-COMP, ea AM7627 SPORT-COMP II, ea AM4427 ULTRA-LITE, ea AM7727 ULTRA-LITE II, ea Oil Tank Temperature Full Sweep Mechanical, 2-1/16" Includes 4' capillary tubing and 1/2" NPT fi tting. All Oil Tank Temp gauges measure in F. AM4346 ULTRA-LITE, ea Oil Temperature Full Sweep Mechanical, 2-1/16" Includes 6' capillary tubing and 1/2" NPT fi tting. All Oil Temp gauges measure in F. AM4741 Carbon Fiber, ea AM5741 Phantom, ea AM3341 SPORT-COMP, ea AM2441 TRADITIONAL, ea AM4341 ULTRA-LITE, ea AM2609 Z Series, ea Full Sweep Electrical, 2-1/16" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings and 8' wiring harness. Note: *With peak and warning. AM7156 C2, ea AM6156 COBALT, ea AM5956 ES, ea AM7356 NV, ea AM7556 Phantom II, ea AM4340 * ULTRA-LITE, ea AM4956 ULTRA-LITE II, ea Full Sweep Mechanical, 2-5/8" Includes 6' capillary tubing and 1/2" NPT fitting. Note: *Includes 12' capillary tubing. AM4841 Carbon Fiber, ea AM7941 COBALT, ea AM5841 Phantom, ea AM7841 Phantom II, ea AM3441 SPORT-COMP, ea AM3443 * SPORT-COMP, ea AM7641 SPORT-COMP II, ea AM4441 ULTRA-LITE, ea AM7741 ULTRA-LITE II, ea Full Sweep Electrical, 2-5/8" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings and 8' wiring harness. Note *With peak and warning. AM7956 COBALT, ea AM7856 Phantom II, ea AM7656 SPORT-COMP II, ea AM4440 * ULTRA-LITE, ea AM7756 ULTRA-LITE II, ea Short Sweep Electrical, 2-1/16" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings. AM7148 C2, ea AM4748 Carbon Fiber, ea AM6148 COBALT, ea AM5948 ES, ea AM7348 NV, ea AM5747 Phantom, ea AM7548 Phantom II, ea AM3347 SPORT-COMP, ea AM3348 SPORT-COMP, ea AM3648 SPORT-COMP II, ea AM2542 TRADITIONAL, ea AM2543 TRADITIONAL, ea AM4347 ULTRA-LITE, ea AM4348 ULTRA-LITE, ea AM4948 ULTRA-LITE II, ea AM2638 Z Series, ea AM2639 Z Series, ea Short Sweep Electrical, 2-5/8" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings. AM4848 Carbon Fiber, ea AM7948 COBALT, ea AM5847 Phantom, ea AM7848 Phantom II, ea AM3542 SPORT-COMP, ea AM3543 SPORT-COMP, ea AM7648 SPORT-COMP II, ea AM4447 ULTRA-LITE, ea AM7748 ULTRA-LITE II, ea Pressure psi Full Sweep Mechanical, 2-5/8" Requires #4 braided line. All Oil Tank Temp gauges measure in F. AM4424 ULTRA-LITE ea Pyrometer Full Sweep Electrical, 2-1/16" Includes probe and 10" of thermocouple wire. Probe includes multiple mounting options, including 1/8" NPT and weld-in fi tting and hose clamp method. AM7144 C2, ea AM7145 C2, ea AM4744 Carbon Fiber, ea AM6144 COBALT, ea AM6145 COBALT, ea AM5944 ES, ea AM5945 ES, ea AM7344 NV, ea AM7345 NV, ea AM5744 Phantom, ea AM5745 Phantom, ea AM7544 Phantom II, ea AM7545 Phantom II, ea AM3344 SPORT-COMP, ea AM3644 SPORT-COMP II, ea AM3645 SPORT-COMP II, ea AM4344 ULTRA-LITE, ea AM4345 ULTRA-LITE, ea AM4944 ULTRA-LITE II, ea AM4945 ULTRA-LITE II, ea AM2654 Z Series, ea Temperature Full Sweep Mechanical, 2-5/8" Includes 8' capillary tubing and 1/2" NPT fi tting. Temperature gauges measure in F. AM4435 ULTRA-LITE ea Trans Temperature Trans Temperature gauges measure in F. Full Sweep Mechanical, 2-1/16" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fittings. AM3351 SPORT-COMP, ea AM2451 TRADITIONAL, ea AM4351 ULTRA-LITE, ea AM2615 Z Series, ea Full Sweep Electrical, 2-1/16" Includes 8' capillary tubing and 1/2" NPT fitting. AM7157 C2, ea AM6157 COBALT ea AM5957 ES, ea AM7357 NV, ea AM7557 Phantom II, ea AM3657 SPORT-COMP II, ea AM4957 ULTRA-LITE II, ea Full Sweep Mechanical, 2-5/8" Includes 8' capillary tubing and 1/2" NPT fitting. AM4851 Carbon Fiber, ea AM5851 Phantom, ea AM3451 SPORT-COMP, ea AM4451 ULTRA-LITE, ea Short Sweep Electrical, 2-1/16" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fittings. AM7149 C2, ea AM4757 Carbon Fiber, ea AM6149 COBALT, ea AM5949 ES, ea AM7349 NV, ea AM5757 Phantom, ea AM7549 Phantom II, ea AM3357 SPORT-COMP, ea AM3649 SPORT-COMP II, ea AM2552 TRADITIONAL, ea AM4357 ULTRA-LITE, ea AM4949 ULTRA-LITE II, ea AM2640 Z Series, ea Short Sweep Electrical, 2-5/8" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fittings. AM7957 COBALT, ea AM5857 Phantom, ea AM7857 Phantom II, ea AM3552 SPORT-COMP, ea AM7657 SPORT-COMP II, ea AM4457 ULTRA-LITE, ea AM7757 ULTRA-LITE II, ea Vacuum 30 in Hg Full Sweep Mechanical, 2-1/16" Includes 10' nylon tubing and universal T fi tting. AM4784 Carbon Fiber ea AM5784 Phantom ea AM3384 SPORT-COMP ea AM2484 TRADITIONAL ea AM4384 ULTRA-LITE ea AM2610 Z-Series ea Full Sweep Mechanical, 2-5/8" Includes 10' nylon tubing and universal T fi tting. AM4884 Carbon Fiber ea AM7984 COBALT ea AM5884 Phantom ea AM7884 Phantom II ea AM3484 SPORT-COMP ea AM7684 SPORT-COMP II ea AM4484 ULTRA-LITE ea AM7784 ULTRA-LITE II ea Full Sweep Electrical, 2-5/8" Includes MAP sensor, universal T fi tting and 8' wiring harness. AM4871 Carbon Fiber ea Dash & Console Components B AutoMeter Gauges 77

15 Performance Gauges Digital Voltmeter 8-19 Volts Includes 8' harness. AM6391 COBALT ea Voltmeter 8-18 Volts Full Sweep Electrical, 2-1/16" Note: *With peak and warning. AM7191 C ea AM6191 COBALT ea AM5991 ES ea AM7591 Phantom II ea AM3691 SPORT-COMP II ea AM4383 * ULTRA-LITE ea AM4991 ULTRA-LITE II ea Full Sweep Electrical, 2-5/8" Note: *With peak and warning. AM4483 * ULTRA-LITE ea Short Sweep Electrical, 2-1/16" AM1294 AM. MUSCLE ea AM7192 C ea AM4791 Carbon Fiber ea AM6192 COBALT ea AM5992 ES ea AM1192 MCX ea AM7392 NV ea AM5791 Phantom ea AM7592 Phantom II ea AM3391 SPORT-COMP ea AM3692 SPORT-COMP II ea AM2592 TRADITIONAL ea AM4391 ULTRA-LITE ea AM4992 ULTRA-LITE II ea AM2645 Z Series ea Short Sweep Electrical, 2-5/8" AM4891 Carbon Fiber ea AM7991 COBALT ea AM5891 Phantom ea AM7891 Phantom II ea AM3592 SPORT-COMP ea AM7691 SPORT-COMP II ea AM4491 ULTRA-LITE ea AM7791 ULTRA-LITE II ea Water Pressure Full Sweep Mechanical, 2-1/16" Note: Includes 10' nylon tubing, 1/8" and 1/4" NPT fi ttings. AM4307 ULTRA-LITE, 0-35 psi ea Full Sweep Electrical, 2-1/16" Note: includes 1/8" NPT sender and 8' wiring harness. Note: *With peak and warning. AM4368 * ULTRA-LITE, psi ea Full Sweep Mechanical, 2-5/8" Includes 10' nylon tubing, 1/8" and 1/4" NPT fi ttings. AM4407 ULTRA-LITE, 0-35 psi ea Water Temperature Full Sweep Mechanical, 2-1/16" Includes 6' capillary tubing and 1/20" NPT fi tting. All Water Temp gauges measure in F. Note: *Includes 12' of capillary tubing. AM7132 C2, ea AM7131 C2, ea AM4732 Carbon Fiber, ea AM4731 Carbon Fiber, ea AM6132 COBALT, ea AM6131 COBALT, ea AM5932 ES, ea AM5931 ES, ea AM7332 NV ea AM7331 NV ea AM5732 Phantom ea AM5731 Phantom, ea AM7532 Phantom II, ea AM7531 Phantom II, ea AM3332 SPORT-COMP, ea AM3333 * SPORT-COMP, ea AM3331 SPORT-COMP, ea AM3632 SPORT-COMP II, ea AM3631 SPORT-COMP II, ea AM2432 TRADITIONAL, ea AM2433 * TRADITIONAL, ea AM2431 TRADITIONAL, ea AM4332 ULTRA-LITE, ea AM4333 * ULTRA-LITE, ea AM4331 ULTRA-LITE, ea AM4932 ULTRA-LITE II ea AM4931 ULTRA-LITE II, ea AM2607 Z Series, ea AM2606 Z Series, ea Full Sweep Electrical, 2-1/16" AM4369 includes 1/8" NPT sender and 1/2" NPT fi ttings and 8' wiring harness. AM4355 includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings and 8' wiring harness. Note: *With peak and warning. AM7155 C2, ea AM6155 COBALT, ea AM5955 ES, ea AM7355 NV, ea AM7555 Phantom II, ea AM3655 SPORT-COMP II, ea AM4369 ULTRA-LITE, ea AM4354 * ULTRA-LITE, ea AM4955 ULTRA-LITE II, ea Full Sweep Mechanical, 2-5/8" Include 6' capillary tubing and 1/2" NPT fi tting. Note: *Includes 12' of capillary tubing. AM4832 Carbon Fiber, ea AM4831 Carbon Fiber, ea AM7932 COBALT, ea AM7931 COBALT, ea AM5832 Phantom, ea AM5831 Phantom, ea AM7832 Phantom II, ea AM7831 Phantom II, ea AM3432 SPORT-COMP, ea AM3433 * SPORT-COMP, ea AM3431 SPORT-COMP, ea AM7632 SPORT-COMP II, ea AM7631 SPORT-COMP II, ea AM4432 ULTRA-LITE, ea AM4433 * ULTRA-LITE, ea AM4431 ULTRA-LITE, ea AM7732 ULTRA-LITE II, ea AM7731 ULTRA-LITE II, ea Full Sweep Electrical, 2-5/8" Includes 1/8" NPT sender, 3/8" and 1/2" NPT fi ttings and 8' wiring harness. Note: *With peak and warning. AM7955 COBALT, ea AM7855 Phantom II, ea AM3569 SPORT-COMP, ea AM7655 SPORT-COMP II, ea AM4469 ULTRA-LITE, ea AM4454 * ULTRA-LITE, ea AM7755 ULTRA-LITE II, ea Short Sweep Electrical, 2-1/16" AM1236 Amer. Musc ea AM7137 C2, ea AM4737 Carbon Fiber, ea AM6137 COBALT, ea AM5937 ES, ea AM7337 NV, ea AM5737 Phantom, ea AM7537 Phantom II, ea AM3337 SPORT-COMP, ea AM3637 SPORT-COMP II, ea AM2532 TRADITIONAL, ea AM4337 ULTRA-LITE, ea AM4937 ULTRA-LITE II, ea AM2635 Z Series, ea Short Sweep Electrical, 2-5/8" AM4837 Carbon Fiber, ea AM7937 COBALT, ea AM5837 Phantom, ea AM7837 Phantom II, ea AM3531 SPORT-COMP, ea AM7637 SPORT-COMP II, ea AM4437 ULTRA-LITE, ea AM7737 ULTRA-LITEII, ea AM7290 AM6836 AM6290 AM5990 AM7499 AM5899 Dash & Console Components B AM7599 AM3903 AM3690 AM2897 AM3781 AM4999 AM /8" Pedestal Tachometers 6000 RPM AM2891 Z Series ea 8000 RPM AM3708 SPORT-COMP ea AM3707 ULTRA-LITE ea 3-3/4" Pedestal Tachometers 8000 RPM AM5780 Phantom ea AM3780 SPORT-COMP ea AM2895 TRADITIONAL ea AM3781 ULTRA-LITE ea AM2894 Z Series ea 8000 RPM Short Sweep AM2897 TRADITIONAL ea 10,000 RPM Note: *With remote mount switch. AM3700 SPORT-COMP ea AM6604 * ULTRA-LITE w/recall ea 10,000 RPM Mini Monster AM7290 C ea AM6290 COBALT ea AM5990 ES ea AM7390 NV ea AM7590 Phantom II ea AM3690 SPORT-COMP II ea AM4990 ULTRA-LITE II ea 5" Pedestal Tachometers 8000 RPM AM3980 SPORT-COMP ea 8000 RPM, External Shift Light AM3905 SPORT-COMP ea 9000 RPM, Memory, Two Stage, Shift Light, Dual Range AM6854 ULTRA-LITE ea 9000 RPM, Memory, Two Stage, Shift Light, Single Range AM6856 ULTRA-LITE ea 9000 RPM, with 4 Stage Light & Recall AM6835 Carbon Fiber ea AM6832 ULTRA-LITE ea 10,000 RPM, Memory and 2 Stage External Shiftlight AM3906 SPORT-COMP ea 10,000 RPM, External Shiftlight AM7299 C ea AM4899 Carbon Fiber ea AM6299 COBALT ea AM5999 ES ea AM7499 NV ea AM5899 Phantom ea AM7599 Phantom II ea AM3904 SPORT-COMP ea AM3699 SPORT-COMP II ea AM3911 ULTRA-LITE ea AM4999 ULTRA-LITE II ea 10,000 RPM, Memory AM5795 Phantom ea 10,000 RPM AM3900 SPORT-COMP ea AM3910 ULTRA-LITE ea 10,000 RPM, Dial Shiftlight AM3903 SPORT-COMP ea 11,000 RPM, with 4 Stage Light & Recall AM6836 Carbon Fiber ea AM6834 ULTRA-LITE ea 11,000 RPM, Memory, Two Stage Shiftlight and Single Range AM6858 ULTRA-LITE ea 11,000 RPM, Memory, Two Stage Shiftlight and Dual Range AM6855 ULTRA-LITE ea 78 AutoMeter Gauges Toll Free Order Line

16 Shift-Lite Uses an incandescent bulb and bright amber lens to alert the driver to preset shift points. AM5335 Available in black or silver. Includes cover. Use with external, non-led based, shift light tachometers or DPSS Controller sold separately. AM5334 black ea AM5335 silver ea AM5331 Quick-Lite Shift-Lite Ultra-Fast response, vibration resistant amber LED light. Compatible with all external shift light tachometers and DPSS Controllers sold separately. AM5330 black ea AM5331 silver ea AM5329 chrome ea LED Replacement Bulbs Upgrade your standard instrument lighting with intense LEDs. For all AutoMeter gauges (except clocks, AM/FM ratio, and Autogage), AM3285 speedometers and tachometers. Does AM3294 not work with Digital and LED Lit gauges (i.e., COBALT, C2, NV, Phantom II, SPORT- COMP II, ULTRA-LITE II). Sold individually. Tachometers Twist-In Bulb AM3295 green ea AM3294 red ea AM3296 blue ea AM3297 amber ea All Other Gauges Wedge-Base Bulb AM3285 green ea AM3284 red ea AM3286 blue ea AM3287 amber ea Gauge Accessories AM5330 AM5332 Super-Lite 12 LED Shift-Lite A brighter LED illuminated version of the Shift-Lite. This light uses 12 bright amber LEDs and features a three position brightness switch. Available in black or silver. Use with external, non-led based, shift light tachometers or DPSS Controller sold separately. AM5332 black ea AM5333 silver ea Light Bulb Covers For optional lighting color on most gauges. Does not work with digital and LED lit gauges (i.e., COBALT, C2, NV, Phantom II, SPORT-COMP II, ULTRA- LITE II). Set of 3. AM3215 green set AM3214 red set AM3207 blue set AM3208 yellow set Distributorless Tach Adapter This tach adapter is designed to adapt a standard ignition tachometer, Pro Shift light, or RPM activated module to be used with distributorless ignition systems. Note: For use with distributorless ignition systems only. AM9117 tach adapter ea MCX Series In-Dash Gauge Features a domed lens, bright white dial face, black numbering and increments and fluorescent red pointers and a chrome Super Bezel. When lit for night time use, the gauges display full dial white illumination provided by patented LED lighting technology. The AM1110 light intensity can be controlled through the optional LED Lighting Dimmer independently from your OE dash lighting (available separately). Important: Electric speedometers operate on ,000 pulse/mile sending units. Use existing sender if vehicle is originally equipped with an electric speedometer. Use AM5291 to convert from mechanical drive to electric. Tachometers operate on 4, 6, or 8 cylinder engines with most factory or aftermarket ignitions. Some fuel gauges use the vehicle s stock sending unit. Measure resistance using an ohmmeter with the sending unit float in the empty and full position to determine the correct fuel gauge. Electric Programmable Speedo & Tach Combo 5" AM MPH/8000 RPM ea Electric Quad Gauge Combo 5" AM1110 fuel/oil/water/volt ea AM3201 Chrome Cup Gauge Mount Pedestal AM3203 AutoMeter 2-5/8" chrome gauge mounting cups. For use with electric or mechanical gauges Note: Will not work with Auto gage. AM3201 electric gauges ea AM3203 mechanical gauges ea AM2234 Gauge Mount Angle Rings AutoMeter 2-1/16" and 2-5/8". These quality molded black composite rings angles AutoMeter 2-1/16" and 2-5/8" gauges 15 degrees for easier viewing. Sold in package of three. Note: Gauge brackets must be modifi ed to fi t. AM /16" set AM /8" set Gauge Mount Panel Mount your aftermarket 2-1/16" and 2-5/8" gauges the old school way on these aluminum mounting plates. Manufactured in aluminum for strength, these gauge panels also give your interior a hardcore, no-nonsense look. Gauge mount brackets sold separately. Gauge bracket sets include a set of brackets and hardware to mount 3 gauges. For 2-1/16" Gauges AM hole panel ea AM hole panel ea AM hole panel ea For 2-5/8" Gauges AM hole panel ea AM hole panel ea AM hole panel ea Gauge Mounting Brackets 2-1/16" Gauge Mount Bracket AM2230 set of set 2-5/8" Gauge Mount Bracket AM3245 set of set A AM2238 Under Dash Gauge Panel Retro style deep finned gauge panels, beautifully cast in quality aluminum for 2-1/16" and 2-1/8" gauges. The deep fins reflect the famous head designs of the hot rod era. Mounting flange is undrilled for custom configurations. A hole panel ea A hole panel ea A hole panel ea A hole panel ea Universal Gauge Harness If you want to keep your under dash area organized or you think that you need to remove gauges from time to time then you need to install our universal gauge harness. It will connect all major brand gauges including AutoMeter and VDO and works with most dash layouts and sizes. Universal Gauge Harness for cable driven speedometer ea for electric speedometer ea 1/8" Indicator Lamps amber ea red ea green ea 5/16" Indicator Lamps amber ea red ea green ea blue ea 1/2" Indicator Lamps amber ea red ea green ea blue ea AutoMeter Gauges AM2237 A Dash & Console Components B

17 In-Dash Audio Includes Authentic Retro Style Metal Knobs! RG6265C RG6265C RG6879B Rear Auxilliary Input Authentic Push-Button Styling 18 Watts x 4 RMS/40 Watts x 4 Peak Power Output AM/FM Tuner with 30 Presets LCD Display with Enhanced Viewing Angle RG6667B RG6879C RetroSound Laguna AM/FM Radios The Laguna AM/FM radio couples a classic retro appearance with modern electronics and advanced technology. Features 30 station presets, rear auxiliary input and the exclusive Infinimount shaft bracket system which allows you to adjust the radio shafts to fit virtually any OE radio opening. Includes authentic retro style metal knobs for a factory original appearance. Includes: Chrome Radio, Buttons and Knobs RG6265B black radio bezel ea RG6265C chrome radio bezel ea RG6667C chrome radio bezel ea RG6879C chrome radio bezel ea Includes: Chrome Radio, Buttons and Bezel RG6667B with black knobs ea RG6879B with black knobs ea RL6265C SiriusXM-Ready * Made-For-iPod /iphone + Hands-Free Bluetooth Stream Wireless Audio From iphone or Android -based Phones AM/FM RDS Tuner With 30 Presets 32,000 Color LCD Illumination RetroSound Long Beach Radios The new Long Beach radio is SiriusXM-Ready and the only Apple licensed Made-For-iPod radio for your classic car! Play and charge your ipod, itouch or iphone through your audio system. The Long Beach also has built-in Bluetooth for hands-free calling as well as wireless audio streaming from any Android -based phone or iphone. Featuring push button styling and a new 32,000 color display, the Long Beach looks like the original radio but offers the most modern technology available for your classic ride. 25 Watts x 4 RMS/45 Watts x 4 Power Output. Dual RCA Pre-outs + subwoofer output. Rear mounted USB ports and two auxiliary inputs for Apple or other mobile devices. Important: SiriusXM satellite radio requires monthly subscription and radio tuner (sold separately.) For radio tuner see part number XM300. Includes: Chrome Radio, Buttons and Knobs RL6265C chrome radio bezel ea RL6667C chrome radio bezel ea RL6879C chrome radio bezel ea Includes: Black Radio and Buttons with Chrome Knobs RL6265B black radio bezel ea Includes: Black Radio, Buttons and Knobs RL6667B chrome radio bezel ea RL6879B chrome radio bezel ea RH6879C radio off radio on Dash & Console Components B Built-in Bluetooth Technology for Hands-free Phone Operation Wireless Streaming From iphone /Android -Based Phones LCD Display with Selectable White or Green Illumination AM/FM Tuner with 30 Presets and RDS 2 Rear Auxiliary Inputs Two Sets of RCA Low Level Outputs 25 Watt x 4 Channel RMS Amplifi er Plays MP3/WMA Files Via USB Input RetroSound Hermosa Radios The RetroSound Hermosa series radio offers modern technology combined with a classic look, down to authentic push button styling and metal knobs. Now includes Built-in Bluetooth wireless technology for hands-free phone operation and wireless audio streaming from iphone or Android -based phones. The Hermosa plays your digital WMA or MP3 music files through its rear USB input, or you can plug in your ipod or portable MP3 player through the rear auxiliary inputs. It also features a new dual color (green or white) display, front and rear RCA pre-outs and a built-in 25 watts x 4 channel RMS amplifier. Includes: Chrome Radio, Buttons and Knobs RH6265C chrome radio bezel ea RH6667C chrome radio bezel ea RH6879C chrome radio bezel ea Includes: Black Radio and Buttons with Chrome Knobs RH6265B black radio bezel ea Includes: Black Radio, Buttons and Knobs RH6667B chrome radio bezel ea RH6879B chrome radio bezel ea SCP s style Nova script SCP36 solid Bow Tie w/chevrolet RetroSound Screen Protectors RetroSound screen protectors feature a vintage-look radio dial, giving your digital RetroSound radio an added sense of authenticity. Similar to what s used on cell phone screens, these clear screen protectors apply without adhesive making them simple to apply and easy to remove. Available with either a vintage style logo or with a GM licensed logo. Each set includes 3 screen protectors. Note: Radio shown for illustration purposes only and is available separately. Vintage Style Logos Fits Classic, Hermosa and Model Two radios SCP s style set SCP03 early 1960 s style set SCP02 late 1960 s style set SCP43 late 1960 s style with solid state set SCP04 am/fm style set Fits Redondo Radios Only SCP39 late 1960 s style with solid state set GM Licensed Logos Fits Classic, Hermosa, and Model Two radios SCP24 Nova script logo set SCP16 Chevrolet block lettering set SCP17 solid bowtie logo with Chevrolet set SCP20 bowtie outline logo set SCP21 vintage GM style lettering set 80 In-Dash Audio Toll Free Order Line

18 In-Dash Audio A Full 240 Watts of Power (4 x 60) Direct CD Changer Control Electronic Volume & Tuning Controls 16 Station Presets (4AM/12FM) Separate Bass and Treble Controls Left/Right Balance Radio with USB MP3/WMA Playback This AM/FM radio will control all functions of the optional Custom Autosound 6 disc CD changer from the buttons on the radio radios are supplied with the correct surround bezel for your Nova. Check out these exciting features. Important: radios DO NOT include chrome dash bezel. NU601C watts ea NU604C watts ea NU602C watts ea NU603C watts ea High Power 200 Watts (4 x 50) Seek & Scan Tuning Electronic tuner 4 Way Fader Front/Rear Left/Right Separate Bass and Treble NU601C Front Rear Fader Digital Clock Auxiliary RCA Input for Satellite Radio or Portable Players 4 Channel RCA Output for Optional Amplifi ers NK Presets (12 AM/18 FM) 4 Channel RCA Pre-Out Digital Clock No Cassette AM/FM Radio with Auxiliary Input A great look and sound at an awesome price. This radio has Auxiliary Input for ipod, MP3, Satellite radio etc. Excellent features with a classic look plus 200 watts of power! These exciting features include: Important: radios DO NOT include chrome dash bezel. NK Chevy II/Nova ea NK Chevy II/Nova ea NK Nova ea NK Nova ea F87692 F87693 Original Appearance Replicates the Factory Radio Original Feel Knobs, Buttons and Dial Function as Original 180 Watt RMS Power Amplifi er Digital AM/FM Tuner with Presets RCA Inputs for ipod, MP3, or Satellite Radio RCA Jacks for Left & Right Side, & Subwoofer Switch Selectable for 1-4 speakers Receives U.S. and European Frequencies Modern Reproduction Radio These all new radios have the exact look and feel of the original radio, but have the audio performance you expect from today s technology. These radios install without any modifications to the dash and free up additional space behind the dash due to its compact size. Radios include die-cast chrome knobs, faceplates, and functioning AM/FM station presets (where applicable.) Designed and assembled in the USA. F blue light ea F orange light ea F orange light ea PLL Electronic Synthesizer Tuner 30 Presets (12AM/18FM) Best Station Memory 4 Way Fader Auto Reverse Fast Forward and Rewind Separate Bass and Treble Control NM01B 200 Watts High Power (4 x 50) 4 Channel RCA Pre-Out Pre-Set Scan Scan & Seek Tuning Digital Clock Chrome or Black Face AM/FM Cassette Radio If you want great sound at an affordable price then this is the radio for you! A quick review of the features and you ll realize why it s our best seller. Auxiliary Input for direct connection to today s audio accessories. Important: radios DO NOT include chrome dash bezel. NM01B black face ea NK01B black face ea AM/FM Selector Slider 180 Watts of Power Scan Button 10 Pre-sets (5AM/5FM) No Modifi cations to Dash Required MP3/Ipod Ready Remote Control Original Style Analog Controls Digital AM/FM Radio Get modern sound in your classic with these vintage-inspired AM/FM radios for Nova models. This new radio features an original style look with today s technology. These radios will install into any original or reproduction dash with ease, features a digital display that turns black when off blue light ea orange light ea green light ea Dash & Console Components B In-Dash Audio 81

19 In-Dash Audio CU809C CU809B Color Sound Bars Reproduction aftermarket color bars. Can be mounted anywhere and is run through your stereo to light up and move to the music. Available in chrome finish or a powder coated black finish. Includes two different interchangeable lenses for two different lighting effects. Mounting hardware and instructions also included black ea chrome ea SiriusXM Radio Tuner Kit The SiriusXM radio tuner kit connects directly to any of the Retro Sound satellite ready radios to provide the signal required. No need for special adapters or cables. The compact size installs easily and discreetly behind the dash for a fully integrated look. XM300 SiriusXM ea fold down, fully detachable front panel Universal Fit Classic Style CD Player Featuring classic inspired styling with chrome rimmed dual control knobs and finned black or chrome display bezel, this CD player is designed to fit DIN (approx.) 7.2" x 2.11" radio openings (most 1984 and up models) or vehicles modified for DIN radios (single CD players). Featuring a fold down, fully detachable front panel, these do more than just play CDs this in car entertainment system is equipped with USB/ SD/MMC and Aux-In jack interfaces and offers MP3 and WMA playback capability as well as an AM/FM radio. What s more, the extra large, multi-color screen displays the artist name and song title. The CD/MP3 deck features Electronic Shock protection, 4 x 40 watts of power, 1 pair of RCA pre-outs. CU809C 1984 & up chrome ea CU809B 1984 & up black ea Bluetooth Interface Wireless interface for Custom Autosound CD controller radios (USA-630, Secretaudio (SST and SRMS), USA-66). This adapter plugs into the CD changer port of your Custom Autosound radio and gives you the ability to do hands free calling from your bluetooth capable phone. Also listen to music stored on your A2DP enabled bluetooth device. If you have a CD changer or CD1 single player you can still use it with the adapter plugged in (there is a CD changer port on the control box of the Bluekit). Main control box has a 1.5' cord that goes to radio CD port, 6.5' cord to answer button and 3.5' cord from answer button to microphone. A ea Now You Can Stream Audio & Take Calls In Your Nova! SiriusXM Onyx Plus Plug and Play Receiver The SiriusXM Onyx Plus satellite radio receiver lets you listen to SiriusXM anywhere, anytime. This kit includes everything you need to add satellite radio to any RetroSound radio through the auxiliary input. It also includes a built-in FM modulator to interface with any radio with FM stereo. The full color display features album art, channel logos and graphics. You can store up to 20 of your favorite channels for onetouch access, and you can pause, rewind and replay live satellite radio and catch up on the latest sports scores with Sports Ticker. This kit includes a magnetic mount antenna, aux-in cable and all the mounting accessories you will need. Monthly subscription required. Start songs from the beginning when you tune to a smart Favorite channel. Listen at home, at office, outdoors, or in additional vehicles. Lock and unlock channels with mature content. A all ea Dash & Console Components B SecretAudio Hideaway Audio System This audio system features an RF (radio frequency) remote control that works up to 40 feet away, an LCD display that can be mounted almost anywhere, a 200 watt tuner/amplifier that can be hidden, a USB MP3/ WMA flash drive player, and an ipod audio interface, making it a great system for any vehicle. This system can also control an optional 6 disc CD changer. All wiring and instructions are included. S102 tuner set w/remote and display set Bluetooth Receiver Adapter Now you can wirelessly stream audio and take hands-free calls from the road in your Nova! Simply plug this unit into your cigarette lighter, connect the cable to your radio s 3.5mm input jack, and pair your Bluetooth enabled phone or other device... that s it! You ll be ready to wirelessly stream music from your device to your audio system. Calls and music are routed through your car s speakers for excellent sound quality. Includes Bluetooth adapter, 18" extension cable, and instructions. AR ea Radio Off Delay Radio off delay module allows you to listen to your radio after you remove the key from the ignition, just like many modern luxury cars! After removing the key, this unit will keep the radio power active for either 15 minutes or until a door is opened. This allows you to keep listening to the radio without leaving the electric fan or other accessories running. This module is also versatile, because you re not limited to just the radio, this device can be wired to control power to any accessory you choose. RE ea 82 In-Dash Audio Toll Free Order Line

20 Stereo Accessories Compact Footprint: 9" x 2.75" x 13.75" 100 Watt Max Power Output High/Low Level Inputs Adjustable Crossover Network (50-100Hz) 180 Degree Phase Control Hz Frequency Response Range Powered 8" Subwoofer Retrosound s new powered subwoofer is a great way to add some bass to your audio system. This low profile subwoofer features a die-cast aluminum enclosure for optimal heat dissipation and has a compact footprint for easy mounting under or behind seats. Measures: 9" x 2.75" x 13.75". RB450 8" subwoofer ea Reproduction Radio Bezel Reproduction radio dash bezel for Chevy II/ Nova Super Sport models. Features the correct silver color with chrome accents. A replacement for the original bezel when installing aftermarket replacement style AM/FM cassette radios. RB ea Billet Radio Bezel These billet radio bezels are designed to maintain the look of a factory radio bezel while allowing the use of three 2-1/16" gauges. Available in three different billet finishes: fully polished, silver faced with a polished frame, and black faced with a polished frame. Made in the USA. Radio Bezels fully polished ea silver/polished ea matte black/polished ea Radio Delete Bezels fully polished ea silver/polished ea matte black/polished ea NSP1 Radio Noise Suppressor Sometimes after installing any new sound system, you may experience bothersome engine/alternator noise. Be sure to check all grounds for good connections (radio, antenna, amp, etc.). If you still hear engine/ alternator whine, our quality noise suppressor may eliminate this problem. G OE replacement ea NSP1 universal type ea Glove Box Radio Mount Install any aftermarket radio you want while maintaining the original look of your dash! These direct fit radio mounts allow you install any single DIN stereo head unit in your glove box without any fabrication or modifications to your car. Manufactured from laser cut steel and CNC bent for an exact fit. Made in USA. A Nova without AC ea Replacement Radio Bezel Replacement radio bezels for all Nova models. Update the stereo in your Nova with a modern CD player and retain a like factory look with an original style bezel. Available in six different finishes, these offer a tasteful way to customize your interior. Mounting hardware is included with the billet bezels. Plastic Bezels chrome ea woodgrain ea silver ea Billet Bezels polished ea silver w/polished frame ea blk w/polish frame ea silver matte black Billet Radio Delete Bezel These billet radio delete bezels offer the look of a factory radio bezel while allowing the use of three 2-1/16" gauges. Choose from fully polished, silver faced with a polished frame or black faced with a polished frame. Made in the USA. Mounting hardware included fully polished ea silver/polished ea matte black/polished ea Radio Delete Plate This optional equipment delete plate is for vehicles that were ordered without a radio. The plate is molded from sturdy black ABS plastic. The plate has chrome trim like the original. Mounting hardware is included. RD ea CM2120 CM Radio Lens Reproduction radio lenses are available for Nova models with original radios. These lenses feature the correct lettering and colors as original. Available for AM/FM mono or stereo radios. CM mono white letters ea CM stereo green letters ea CM stereo white letters ea CM mono white letters ea CM stereo white letters ea Dash & Console Components B Stereo Accessories 83

21 Stereo Accessories 1968 Nova Radio Control Knobs Reproduction volume and tuning knobs for 1968 Nova factory radios. Replace your knobs and bring your dash back to original. K set Undercover Stealth Speakers This speaker system is designed specifically for under seat or horizontal wall installations. The compact ABS housing contains one 5-1/2" woofer and a Piezo tweeter in each enclosure and is only 2-7/8" high x 8" x 11". Can handle up to 120 watts at 4 Ohms. For a great sound combine these with one of our DVC (dual voice coil) speakers in the dash and you ll have a great system without any vehicle modifications. S pr S5001 front view S Radio Knob Set Reproduction radio knobs designed for models. Injection molded as original. Includes volume and tuning knobs. R piece set Undercover II Upgrade Speakers The Undercover II has an 8" woofer and 2 Piezo tweeters in each box. This system can be mounted in many of the same locations as the regular Undercover. With the 8" woofer in Undercover II you get a much fuller deeper sound. These are a great addition to our Concours series radios with their 200 watt capacity at 4 Ohms. Sold in pairs. Measures: 11"W x 12.5"D x 3"H. S pr Dual Front Speaker Replacement front in-dash speakers. These speakers can handle up to 4 Ohms and are built and designed to fit directly under the dash including all correct mounting brackets and wiring. Each assembly includes two speakers. Note: speaker bracket is not included. S all 60 watt ea S w/o AC 60 watt ea S w/ac 60 watt ea S w/ac 60 watt ea S w/o AC 100 watt ea Dash & Console Components B Radio Control Knobs Reproduction volume and tuning knobs for Nova factory radios AM, AM/FM mono pr all pr Radio Shaft Nuts Reproduction nuts used on many various applications 1963 and later. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts. KW107 7/16"-28 x 1/8" pr Y1057 Y Fader/Tone Control Knob Reproduction inner stereo control knobs. These knobs go behind the volume and tuner knobs to control the fader and tone functions. Y without tab ea Y with tab ea Dual Voice Coil Speaker Get the best quality sound possible from your original dash speaker location with these 140 watt, 4 Ohm dual voice coil speakers. These speakers have up to 70% more cone area than original, giving you improved bass response and power. Both stereo channels hook directly to one speaker. S ea SPUV " x 9" Rear Speaker Set Each set comes complete with two 6" x 9" speakers, wire hardware and speaker grills. Choose from OEM quality speakers at 80 watt capacity or Kenwood speakers at 300 watt capacity. Both sets have a rating of 4 Ohms. SPUV OEM speakers set SPUV Kenwood set S Dual Front Speaker These dual voice coil speakers have up to 70% more cone area than the conventional dual speaker setup. This will give you improved bass response and power handling 140 watts at 4 Ohms. Both stereo channels hook directly to one speaker. S without AC ea S with AC ea S without AC ea S Kenwood Dual Front Speaker Kenwood replacement in-dash speakers. These speakers can put out a continuous 21 watts and are built and designed to fit directly under the dash as original. Each in-dash speaker includes dual speakers built into one assembly including necessary wiring for installation. S with AC ea S without AC ea S with AC ea 84 Stereo Accessories Toll Free Order Line

22 Stereo Accessories RB333 RB332 KP621 RB RetroSound Ultra Thin Speakers The RetroSound Ultra Thin speakers are designed and sized to fit in a OEM or a custom location. These speakers feature a custom tooled, low profile basket and ultra thin Neodymium magnet structure. Due to their ultra thin mounting depth profile, 1.30" and 1.77", you can mount them in places other speakers can t fit. Features include full range speakers with a low profile Mylar tweeter assembly, single or dual voice coil system, rigid poly cone, and Santoprene surround Dual Voice Coil Dash Speakers with AC 100 Watt Max RB333 5" x 7" 1.77" mounting depth ea without AC 160 Watt Max RB332 4" x 10" 1.77" mounting depth ea Universal Speakers Ultra Thin Single Voice Coil 100 Watt Max RB " dia. 1.77" mounting depth pr Single Voice Coil 80 Watt Max RB338 4" x 6" 1.30" mounting depth pr KP Kick Panel Speakers These kick panel speakers sound great and enhance interior appearance. All models are black ABS plastic that can be left as is or painted to match your interior panels come fitted with 4" x 6" 60 Watt, or Pioneer 4" x 6" 120 watt units and the units come fitted with 6-1/2" 80 Watt, two way speakers or Pioneer 6-1/2" 120 Watt speakers. Note: These speakers have a 4 Ohm rating, check for compatibility with your audio system. Custom Autosound Speakers 4" x 6" 60 Watt Speakers KP convertible pr KP coupe pr 4" x 6" 120 Watt Speakers KP convertible pr KP coupe pr 6-1/2" 80 Watt Speakers KP without AC pr KP without AC pr 6-1/2" 160 Watt Speakers KP without AC pr KP without AC pr Without Speakers A convertible pr A coupe pr RB359 RB Replacement Dash Speaker These RetroSound standard replacement dash speakers are just what your looking for to finish your sound system. These speakers have an acoustically transparent cone to protect drivers and cone from the elements. They have a 3 way midrange tweeter to accurately reproduce midrange and high frequencies. 5" x 7" Dual Voice Coil with AC 30 Watt Max RB359 2" mounting depth ea 4" x 10" Dual Voice Coil without AC 40 Watt Max RB " mounting depth ea SPUV Kick Panel Speakers Our 4" x 6" speaker assemblies will fit all Nova models. If your Nova was originally equipped with kick panel speakers, you can install them using the original speaker grills. For Nova models that did not include this option, cutting will be necessary for installation. 60 or 80 watts at 4 Ohms 80 Watt Capacity SPUV pr 60 Watt Dual Cone KNWSPUV pr Nova Kick Panel Speaker Grill This is an excellent reproduction of the 4" x 6" metal speaker grill. HC pr Dash & Console Components B Speakers 85

23 Radio Accessories Rear Seat Shelf Speaker Cover Rear cover used to insulate the rear seat shelf speakers. This cover installs under and around the speaker directing the sound up and out of the grill. K ea Fender Mounted AM Antenna This reproduction front fender mounted antenna, includes the cable, mast, body and all of the required mounting pieces. B ea Speaker Enclosure Retainer This retainer is used to retain the speaker into the rear speaker housing. Note: Retainer brackets are not available ea Chevy II/Nova Antenna Mast Reproduction antenna mast for Chevy II/Nova models. This antenna features a telescoping mast with a threaded end ea B B Dash & Console Components B CG Speaker Harness Correct reproduction speaker harness for Chevy II/Nova models. CG single rr seat spkr ea CG spkr stereo frt/rr ea NV spkr stereo frt ea NV spkr stereo rr ea CA spkr stereo ea CG pwr ext. 1 frt spkr ea CG AM, AM/FM mono ea MP rear seat ext ea NV AM, AM/FM mono ea Radio Connector/Speaker Pigtails This replacement pigtails are just what you need to get your original Delco radio and speakers plugged in and operating again radio connector ea front speaker connector 8.99 ea rear speaker connector ea Radio Support Bracket Reproduction of this often discarded bracket for all original factory AM or FM radios. Note: Not for use with aftermarket radios ea Rear Mounted Antennas Reproduction functioning right rear antenna or the non functioning dummy antenna for Chevy II/ Nova models. B LH rear dummy ea B RH rear live ea A A Telescoping Antenna Mast Looking for a telescoping antenna mast at a lower price? We can help. Although not an exact duplicate of the OE style, each mast will fit and function just like the original. Made of stainless steel, and features the correct grooved tip. Note: 1969 includes antenna bezel which may differ cosmetically from the original. A screw-in style ea A plug style ea Antenna Reproduction antenna assembly for Nova models. Includes mast, cable and mounting hardware. May differ cosmetically from the original. ANT kit Radio Antenna Mast OER reproduction 30" non-retractable round mast AM/FM fender antenna mast for Nova models AM/FM ea 86 Audio Accessories Toll Free Order Line

24 Radio Accessories Antenna Lead Cable Replace your original worn out antenna cable with this superb quality replacement. This cable is for Nova models with a windshield style antenna. K ea Antenna Gasket This is the correct gasket which mounts between the fender and the antenna bezel. For all AM or AM/FM antennas gasket ea AT Windshield Antenna Ground Strap Cowl to hood antenna ground strap. This strap grounds the windshield-mounted antenna to the hood ea The Smart Antenna This antenna is an active magnetic type antenna, working on the magnetic field associated with a conductor excited by a radio wave. The product is totally self contained using printed circuit technology and miniaturized components, coupled with high quality manufacturing methods. You don t need an external rod, no drilling to install, no removal prior to car wash. Concealed mounting prevents theft, and it also includes a lifetime warranty! Antenna cable measures 9 feet long. Fits all years! SA ea Antenna Wrench The tool you need to remove antennas. Simple and compact, this tool fits most antenna bezel nuts. Compared to other tools, it is easier to carry and use, and won t damage the nut. Rugged steel construction for years of use. S ea AT1246 AT1246 RetroSound Hidden Antenna The RetroSound amplified AM/FM hide-away antenna is a great solution for anyone who doesn t want to install a standard fender mount antenna. This hidden antenna installs in seconds using a standard antenna plug and your radio s power antenna wire. This antenna uses magnetic field circuitry for enhanced radio reception. It can be installed almost anywhere thanks to the supplied 105 inch antenna lead and power wire. RA010 RetroSound hidden antenna ea Universal Power Antennas When replacing your fender antenna, consider a fully automatic power antenna. Just think of how much easier it would be to put on or take off your car cover without the hassle of a fixed mast antenna. Automatically raises when radio is turned on, and retracts when radio is turned off. This universal power antenna includes 5 different angled mounting bases to ensure a custom fit. Requires 11.5 inch mounting depth inside fender. ANT4 universal style ea Antenna Body Threaded Reproduction radio antenna body for ChevyII/ Nova models. This body was used for front mount antennas on and rear mount antennas on 1965 models. Features a threaded end for screw-on style cable connection. A front mount ea A rear mount ea Antenna Bezel Nut Chrome antenna bezel nut which goes on top of the antenna bezel. Hole in nut is 9/16" i.d ea AT Nova Antenna Location Templates When mounting an antenna on new sheet metal, the most important step is knowing the exact and correct placement of antenna before you drill. No more worrying about costly body work caused by mis-drilled holes. Simply apply the template to the corresponding panel using referenced body surfaces for exact location, and drill the holes. With these antenna templates, you can be sure that you re mounting your antenna in the correct factory location the first time. AT rear driver side ea AT front passenger side ea AT rear passenger side ea AT front passenger side ea AT rear passenger side ea AT front passenger side ea Antenna Nut Tool This tool is for Chevy II/Nova models with a smooth antenna nut with 2 notches on the bottom. This tool will allow you to remove or install your antenna without damaging the nut or your classic Chevrolet. BS ea Dash & Console Components B Audio Accessories 87

25 Headlamp Switches Dash & Console Components B 1967 Headlamp Switch Knob OER reproduction headlamp switch knob for 1967 models. This bright chrome plated knob is reproduced to exact factory specifications. Also includes the rod assembly so you can remove the old knob and reinstall the new one easily ea Headlamp Switch Knob Billet headlamp knob for Chevy II/Nova models. This is the knob only and does not include the rod ea Headlamp Switch Knob A great reproduction headlamp switch knob for Nova models. Each knob is reproduced to exact factory specifications. Features a bright chrome plated knob with a black center face. Includes the rod assembly so you can remove the old knob and reinstall the new knob easily Reproduction Headlamp Switch ea Hazard Lamp This switch Flasher Assembly The hazard flasher assembly is used Headlamp Switch Knob OER headlamp switch knob for Nova models. Features early style lamp symbol ea Headlamp Switch Knob OER headlamp switch knob for Nova models ea Headlamp Switch Mounting Nut This mounting nut could save you trouble when installing your new switch. If the old nut is damaged or broken during removal, the new switch cannot be installed correctly. For models ea ea tool nut Headlamp Switch Nut Tool First, remove your knob by locating the plunger on the switch body to release the knob and pull it out. Once the knob is removed you ll see the slot at the top of your switch mounting nut which this tool fits into. Line the tool up with the slot and turn the nut out. It s as easy as that. Note: Switch nut pictured is not included. T ea Headlamp Auto-Off Relay The Headlamp Auto-Off Relay automatically turns off your headlamps, running lamps, and dash lighting when you turn off the ignition key. No more worrying of a dead battery when forgetting to turn off your headlamps. Fits most applications without cutting the factory harness. RE ea LED Lamp Flasher GM Headlamp Switch Correct GM switch used to replace original non functional headlamp switches on all Nova models. Note: These service replacement parts will fi t and function exactly as original. G6674 G ea G ea mounts on the dash and controls the current flow to the headlamp system. These switches also adjust the brightness of the instrument panel lights. Replace your nonoperational switch with this excellent reproduction ea ea ea Headlamp Dimmer Switch Usually in dire need of replacing after years of use, a dimmer switch allows the driver to select either high or low beam operation of the headlamps floor mounted ea Headlamp Dimmer Switch Pigtail If the wiring that connects to your floor mounted dimmer switch is cracked and corroded or the pigtail is broken, this reproduction pigtail is just what you need to restore your headlamps to working condition. This replacement headlamp dimmer switch connector will fit all Chevy II/Nova models with floor mounted dimmer switch. WE ea Custom Dimmer Switch and Bezel Set Customize your floor dimmer switch with these elegant dimmer switch and bezel sets. Complete sets include: dimmer switch, aluminum switch cap with pad, aluminum bezel, and bezel installation hardware. Available in black anodized, polished, and satin silver finishes. Bezel sets (without the switch and cap) are also available separately. Dimmer Switch and Bezel A black anodized finish kit A polished finish kit A satin silver finish kit Bezel Only A black anodized ea A polished finish ea A satin silver finish ea Dimmer Switch Covers P139 rubber pad ea P140 chrome pad ea Due to the lower current draw of LED lamps, these electronic 12 volt flashers are recommended for use on vehicles equipped with B6207 LED lamps. Available in 20 amp or a 25 amp. The 20 amp is available in two or three prong type. Important: If installing LEDs on both the front and rear, two fl ashers are usually required. B amps 2 prong ea B amps 3 prong ea F amps 2 prong ea with virtually all Chevy II/Nova models. Replace your non-working flasher unit with this service replacement item. G ea A Hazard Switch Knob Replace your missing or damaged hazard switch knob with a reproduction or a GM replacement. The knob is a reproduction die-cast and chrome plated knob just like the original. The knobs are an original GM service replacement. Note: * will also fi t although not original in appearance ea ea * st design 1 pc ea G nd design knob 1.99 ea nd design 3 pc ea 88 Headlamp Switches. Hazard Components Toll Free Order Line

26 Lighters/Dash Bezels Cigarette Lighter OER reproduction cigarette lighter knob and Rochester element for Chevy II/Nova models. This reproduction includes the correct knob assembly that will match the original knob exactly Rochester ea Cigarette Lighter Heating Element Correct replacement cigarette lighter heating element for Rochester design lighters. Remove the old element and replace it with this new one. Originally installed on Nova models. The Rochester element is threaded Rochester ea Chevy II/Nova Dash Bezels Reproduction Chevy II/Nova dash bezels. This 4 piece set includes the bezels for the cigarette lighter, wiper motor switch, headlight switch and the ignition switch. Made from polished aluminum with black lettering just like original, these are sure to enhance your interior. C set 1967 Cigarette Lighter Knob and Element Correct replacement lighter knob for 1967 Chevy II/ Nova models. Includes the entire knob with heating element ready to plug in Rochester ea Rochester Lighter Housing OER reproduction lighter housing for models with Rochester style cigarette lighters. The lighter housing is mounted in the dash, which the knob and element are inserted into ea 1969 Defogger Switch Bezel We offer a reproduction defogger switch bezels for all 1969 Nova models. K ea 1969 Cigarette Lighter Assembly Reproduction cigarette lighter assembly including the element and knob. Note: The housing and C retainer may be necessary to complete the lighter assembly Rochester ea Rochester Lighter Housing OER reproduction lighter housing for models with Rochester style cigarette lighters. The lighter housing is mounted in the dash, which the knob and element are inserted into. Requires the lighter housing retainer # blade type ea Center Dash Ashtray Insert Reproduction of the original ashtray receiver for Nova models. Installs in the pull out dash ashtray. Correct stamped steel reproduction, zinc coated for authentic appearance ea Cigarette Lighter Assembly Correct reproduction lighter and element assembly for Nova models Rochester ea Cigarette Lighter Assembly Correct replacement lighter assembly and element for Nova models. Includes the complete heating element with knob. G Casco ea G Cigarette Lighter Housing Cigarette lighter housing for models with Rochester or Casco style cigarette lighters. The lighter housing is mounted in the dash, which the knob and element are inserted into Rochester ea G Casco ea Rochester Lighter Housing Retainer Correct replacement lighter housing assembly for Nova models equipped with Rochester style lighter assemblies. This housing will replace the original exactly without light socket ea red orange yellow green blue pink purple titanium Spotlight Rechargeable LED Light Ever needed a light but its batteries were dead? These 12V LED rechargeable lights charge in your cigarette lighter outlet, provide about 2 hours of light per charge, and hold a charge for over 18 months. Each is water resistant, and features red glow charge indicator. Shines 100 feet red ea orange ea yellow ea green ea blue ea pink ea purple ea titanium ea Dash & Console Components B Lighters. Dash Bezels 89

27 Glove Box Components Glove Box Glove Box Lock Retainer Door Arm Stopper Reproduction glove box lock Keep your glove box door from N Glove Box Our pre-assembled glove boxes are die-cut, folded and stapled, cutting down on the amount of time you spend putting it together. We use original materials when manufacturing each box. The fit is perfect every time. N ea N ea CA with AC ea CA without AC ea slamming against your dash! We offer correct glove box door stoppers. Easy to install and usually needs to be replaced ea Glove Box Lamp Bulb Replace your non-working glove box bulb with a new one ea ea ea ea ea retainer for all Chevy II/Nova models. This metal retainer secures the glove box lock and prevents it from falling out of place lock retainer ea Glove Box Lock Cylinder Replacement cylinder for Nova models. This cylinder is uncoded and must be taken to a locksmith with your original key and coded to your existing key. You may purchase a key if your original is lost. CL ea CM3025 N1310 N Glove Box Latch Striker Reproduction glove box latch striker for Chevy II/Nova models. N ea N ea CM Glove Box Emblem Correct reproduction glove box emblem for Chevy II/Nova SS. Made in USA. CM Nova SS ea CM Nova with Chevy II ea Glove Box Case, Hook and Spring Replace your glove box lock cylinder, case, hook, and spring assembly. This case and hook assembly is ready to install. Keys are not included. G case and hook ea Dash & Console Components B Glove Box Striker Reproduction glove box striker for This mounts to the dash in the glove box opening to secure the door when it is in the closed position. Use your original hardware and renew the factory look and function ea Glove Box Insert Clip These OER reproduction stamped metal clips attach to the glove box liner. These clips allow the liner to be attached in place with mounting screws. Mounting screws sold separately. K ea R piece set Glove Box Rubber Stoppers Correct glove box door stoppers in the original configuration. Easy-to-install and usually needs to be replaced. A pr 1966 Chevy II/Nova Glove Box Emblem Correct reproduction glove box emblem for 1966 SS Chevy II/Nova. Made in USA. CM ea Super Sport Dash Panel Emblem Correct reproduction glove box emblem for Nova Super Sport models. N Nova SS ea N Super Sport ea TK118 N Glove Box Lock Includes a correct replacement of the lock cylinder with 2 pre-cut keys. Your choice of the original key or the later model GM key. Each lock is coded to the provided key. TK163A original key ea TK163B late model key ea TK118A original key ea TK late model key ea TK119A 1968 original key ea TK late model key ea Courtesy Light Set GM set includes: GM door switches, wires and light sockets to install courtesy lights inside your vehicle. Universal set includes: universal door switches, wires and light sockets to install courtesy lights inside your vehicle GM set set universal set set Under Dash Courtesy Lamp Set positions two lamps under corners of the dashboard. Controlled by turning the headlight switch knob and/ or door jamb switches. Special sockets/brackets and bulbs included. TF set 90 Glove box Components Toll Free Order Line

28 Turn Signal Parts Turn Signal Lever Replace your missing or damaged turn signal lever. Available in both bolt on and a thread in style with tilt (thread in) ea w/o tilt (bolt on) ea A Billet Steering Column Lever Kit Billet steering column lever kit from Ringbrothers to fit early GM steering columns and aftermarket Ididit and Flaming River columns. Machined from 6061-T6 aluminum and are available in either a natural aluminum or a black anodized finish. A natural kit A black kit G Horn Contact Components Correct replacement horn contact unit designed to replace damaged or defective originals. G spring only ea G ea G w/cushion rim wheel 5.99 ea G with sport wheel ea G with custom wheel ea Turn Signal Lever Reproduction turn signal lever for Chevy II/ Nova models with a tilt steering column ea ea Turn Signal Lever Reproduction turn signal lever for Nova models. This lever is for models with or without a factory tilt steering column ea Turn Signal Lever Knob Correct turn signal lever knob for Chevy II/ Nova models. This is a reproduction knob specifically designed for use without cruise control ea Turn Signal Lever Knob Correct reproduction of the turn signal lever knob for models. KW black ea SM15 SM Turn Signal Cam Having trouble with your turn signal switch? If it won't turn off after you ve turned then Classic has the answer. Your cancelling cam may need to be replaced. SM ea SM ea SM stamped guide ea SM with tilt ea SM without tilt ea SM ea Custom Turn Signal and Tilt Levers These turn signal and tilt steering wheel levers will give your interior a custom look. They have a sleek tapered design with a beautiful polished finish and are manufactured using top quality stainless steel tilt wheel lever ea turn signal lever with tilt ea turn signal lever without tilt ea Tilt Wheel Release Lever Reproduction turn signal lever for Chevy II/ Nova models with the factory tilt wheel option ea Tilt Wheel Release Lever Replace your missing or damaged tilt wheel release lever with this quality reproduction. Fits all models with tilt steering columns ea ea ea Turn Signal Lever Knob Correct reproduction of the turn signal lever knob for models. KW black ea 1962 Turn Signal Repair Set Reproduction of the turn signal mechanism repair set for 1962 Chevy II/Nova, which is designed to repair a faulty turn signal cancelling cam. Each set includes: the mechanism, spring, retainer, and bushing. B set G Turn Signal Cancelling Cam Original turn signal cancelling cams for Nova models. CM all ea CM with tilt ea with tilt ea G with tilt wheel ea SW327 SM Turn Signal Switch Is the turn signal switch in your Chevy II/ Nova working? If not, we have an answer to your problem that won t break the bank. These OE quality reproduction switches look and perform just like new! Located in the steering column, these switches will help prevent accidents by warning other vehicles that you intend to turn. Note: *Use adapter G8080. Reproduction ea MP st design ea SM nd design ea B BPC metal type ea B Guide plastic type ea SM BOYNE type ea with column shift ea SM w/o column shift ea SW ea ea AC Delco G pin SAEQ ea G pin plug ea G8067 * w/o column shift ea G adapter for G ea Dash & Console Components B Turn Signal Levers. Switches 91

29 Ignition & Steering Column LS Ignition Switch Reproduction ignition switch for Chevy II/ Nova models. LS ea LS ea LS ea with tilt wheel ea without tilt wheel ea G Ignition Switch Rack Reload Spring Original replacement unit for 1969 through 1979 models. The rack reload spring allows the ignition rack to resume its normal position after activation. Choose from tilt wheel or non tilt wheel. G without tilt wheel 8.99 ea G with tilt wheel ea S Shift Indicator Lens This shift indicator lens is for 1966 Chevy II/Nova models with a TH350/400 or overdrive transmission installed in a car that was originally equipped with a Powerglide transmission. Lens is cut from clear plastic with light green letters. A small amount of adhesive is needed for installation. S TH350/ ea S overdrive ea G8115 G Steering Column Shaft Sphere An original GM shaft sphere for Nova models. This unit consists of two column shaft centering spheres, a spring and an instruction sheet for installation. G all set G with AT set Shift Indicator Overlay S156 Column shift indicator lens overlay. Features the correct shift pattern for TH350/400 or overdrive transmissions in a Chevy II/Nova. This high-quality, adhesive backed overlay is black with white letters. S TH350/ ea S overdrive ea Dash & Console Components B G Delco Ignition Switch When only Delco will do, use this authentic Delco service replacement switch. Important: *At steering column base. May differ cosmetically from the original switch. G ea G ea G8118 * with tilt wheel ea G8117 * without tilt wheel ea Ignition Switch Bezel Nut Reproduction chrome plated bezel nut that threads onto the ignition switch and secures it to the dash ea C ea Chevy II Ignition Bezel Reproduction ignition bezel for Chevy II models. Not correct for Nova models. CM ea Ignition Switch Bezel Nut Tool This tool is designed G8117 C specifically to interlock with the three recessed dimples on the outside edge of the ignition bezel nut. T ea G Ignition Switch Actuator Sector This is the correct sector gear assembly which installs directly behind the ignition switch. When turning the key, the ignition rack assembly turns the sector gear and activates the ignition. G without tilt wheel ea G with tilt wheel ea Steering Column Bearing Original GM lower steering Column Lock Shoe Return Spring Original steering column G5008 column bearing for and Nova models without tilt wheel. Replacing the bearing will help keep your steering in good operating condition. G without tilt ea spring for use with the lock shoe return assembly without tilt wheel 9.99 ea with tilt wheel ea Lower Steering Shaft Bearing Kit This lower steering shaft bearing kit is for Nova models. This kit uses a sealed ball bearing to prevent steering column play caused when the rubber slip-on seals of the original design wear out over time. This kit can be installed with the removal of the lower steering shaft without removing the main steering column. Each kit includes: the ball bearing, adaptor, retainer, and clip. A kit Column Shift Lens Conversion These are new column shift indicator lenses used when converting your Powerglide equipped Chevy II/Nova with a later model transmission S138 TH350 or TH ea S R or 200R ea TH350 or TH ea R or 2200R ea CM3019 CX Column Shift Knob Reproduction 3-speed or automatic shift knob for Chevy II/Nova models with column shift. Knobs are black and produced using correct materials. CM black ea CX black ea Lower Steering Column Cover Reproduction of the lower steering column cover for Nova models. This ABS plastic piece mounts to the lower dash panel at the steering column. N ea 92 Ignition & Steering Columns Toll Free Order Line

30 Steering Column Parts SC11264A _ detail SC Tilt Column These all new tilt steering columns include all levers and knobs and come completely wired for self-canceling turn signals, 4 way flashers, and horn. A neutral safety switch is included with all column shift columns. For 1967 models the original mounting hardware and coupler can be used. A stock steering wheel from a 1969 and newer GM passenger car will bolt to the top of the column. Most aftermarket wheels will attach with an adapter. Columns can be ordered in paintable steel, chrome steel, black powder coated, polished or brushed billet aluminum. Important: Column shift units do not include a gear selector indicator. The shift pattern on column shift units can be used for a 3- or 4-speed automatic transmission, but will not match the detent pattern of a Powerglide Tilt Columns with Floor Shift SC paintable steel ea SC11264C chrome ea SC11264A black ea SC10764B brushed alum ea SC10764P polished alum ea Tilt Columns with Column Shift SC paintable steel ea SC11464C chrome ea SC11464A black ea SC11564B brushed alum ea SC11564P polished alum ea 1967 Tilt Columns with Floor Shift SC paintable steel ea SC11263C 1967 chrome ea SC11263A 1967 black ea SC10763B 1967 brushed alum ea SC10763P 1967 polished alum ea 1967 Tilt Columns with Column Shift SC paintable steel ea SC11463C 1967 chrome ea SC11463A 1967 black ea SC11563B 1967 brushed alum ea SC11563P 1967 polished alum ea Tilt Columns with Floor Shift SC paintable steel ea SC15272C chrome ea SC15272A black ea Tilt Columns with Column Shift SC paintable steel ea SC15472C chrome ea SC15472A black ea Headlamp Dimmer Switch Put the convenience of the headlamp dimmer switch at your fingertips with one of these column mounted dimmer switch kits. Dimmer switch unit is mounted in place of the standard turn signal lever. SC on tilt lever ea SC Cruise Control Unit Classic Industries offers cruise control units to upgrade your driving experience and are available for both computerized and non-computerized engines. For computerized engines, this Rostra unit gathers information from you car s computer, so no external sensors are required. Adjustable for 2000, 4000 or 8000 pulses per mile. For non-computer engines, this Rostra electric servo unit uses solid state electronics for accuracy and reliability. Servo and control units are small enough to fit under any dash. Units include pulse generator and either a black column mounted handle or black dash mounted control. Cruise Control with Column Mounted Control SC w/electric speedo set SC w/cable speedo set SC polished cover ea SC brushed cover ea Cruise Control with Dash Mounted Control CRS w/cable speedo set CRS w/electric speedo set DD extra controller ea Ididit Steering Wheel Adapter Set The Ididit steering wheel adapter set is needed when installing a pre-1969 steering wheel to an Ididit steering column. Set includes the necessary items for the horn to function properly and an aluminum ring used to fill the gap between the steering wheel and the column. Important: Steering wheel modification is required set set set 1967 Steering Column Wedge Reproduction of steering column wedge shim for Nova models. Made from steel as original. A ea Steering Column Floor Mount Steering column floor mount and seal for Nova models. Securely mounts the lower steering column to the firewall. Highly recommended when installing a new tilt steering column. N floor mount ea Steering Column Installation Sets These sets include everything needed to install your ididit steering column into your Chevy II/ Nova using new parts from the column to the gearbox. All you need to know is the diameter of the gearbox input shaft and the number of the splines. Important: All sets include: a new coupler, rag joint and steering shaft. When using your original wire harness, a 4 way fl asher is included. With Original Wire Harness SC /4"-30 spline, all set SC /4"-36 spline, all set SC /4"-30 spline, all set SC /4"-36 spline, all set With Aftermarket Wire Harness SC /4"-30 spline, all set SC /4"-36 spline, all set Column Shaft Coupler This coupler connects the ididit steering column shaft to the intermediate shaft on models. SC1026 3/4"-36 Spline x 3/4" Double D SC ea 3/4"-36 Spline x 3/4"-36 Spline SC ea double D shape cross section of shaft Tilt Column Steering Shaft This shaft can be used to replace your damaged or missing original when installing an ididit column. 3/4" double d x 36". Important: Use with SC1026 coupler or SC1017 U-joint and SC1007, SC1068 or SC1009 rag joint. SC ea Tilt Column Rag Joints To complete your column installation, you should also replace your rag joint. These replacement rag joints are the highest quality on the market. This item wears out over SC1010 time and miles and should be replaced when installing your new column. Important: Use SC1018 shaft with DD rag joints listed. SC /4"-36 x 3/4" ea SC /4"-36 x 3/4" ea SC /4"-36 x 13/16" ea SC /4" DD x 3/4" ea SC /4" DD x 3/4" ea SC /4" DD x 13/16" ea Tilt Column Universal Joint These universal joints are SC2021 used for installation of ididit tilt steering columns when an adjustment of geometry is necessary. SC1017 3/4"-36 spline x 3/4" DD ea Dash & Console Components B Steering Column Parts 93

31 Dash & Console Components B SC2931C SC2234C Steering Column Parts Tilt Steering Column These Flaming Intermediate Shaft Coupler Seal Replacement rubber seal for the steering column intermediate shaft coupler ea SC2731C SC2131C Tilt Column Steering Wheel Adapter These ididit steering wheel adapters allow you to bolt most aftermarket wheels to your new tilt column. They feature close tolerances and virtually no gap between the adapter and column. Available in 3, 5, 6, and 9 bolt configurations. Important: The 9 bolt short adapter moves the steering wheel 2" closer to the dash and away from your body for more clearance. 3 Bolt Brushed SC2931B Mullins, Pete & Jake w/cap ea SC2831B Grant, Wheel Shoppe wheel ea Polished SC2931P Mullins, Pete & Jake w/cap ea SC2831P Grant, Wheel Shoppe wheel ea Chrome SC2931C Mullins, Pete & Jake w/cap ea SC2831C Grant, Wheel Shoppe wheel ea 5 Bolt Brushed SC2731B Grant style wheel, w/button ea Polished SC2731P Grant style wheel, w/button ea Chrome SC2731C Grant style wheel, w/button ea 6 Bolt Brushed SC2231B Lecarra style wheel, w/button ea SC2232B Momo style wheel ea SC2223B Dino/Diablo style wheel ea SC2234B Nardi style wheel ea SC2235B Corvette style wheel ea Polished SC2231P Lecarra style wheel, w/button ea SC2232P Momo style wheel ea SC2223P Dino/Diablo style wheel ea SC2234P Nardi style wheel ea SC2235P Corvette style wheel ea Chrome SC2231C Lecarra style wheel, w/button ea SC2232C Momo style wheel ea SC2223C Dino/Diablo style wheel ea SC2234C Nardi style wheel ea SC2235C Corvette style wheel ea 9 Bolt Brushed SC2131B Grant, Boyd, & etc, w/button ea Polished SC2131P Grant, Boyd, & etc, w/button ea SC2110P short style ea Chrome SC2131C Grant, Boyd, & etc, w/button ea SC2110C short style ea MP Steering Column Adapter Harness Wire harness used to adapt your original wiring to a later model steering column. Use with GM Columns MP ea MP ea MP ea MP ea Use with 1975 and Up GM Columns MP ea MP ea MP ea MP ea Shift Indicator Component Sets The aluminum indicator housing attaches with just two screws. The three piece sets include: the indicator lens, the lens housing and matching pointer. Choose from chrome, black powder coat, brushed or polished finish to match your steering column. 3 Piece Sets SC1051A 3-speed chrome set SC speed black set SC speed brushed set SC speed polished set SC1053A 4-speed chrome set SC speed black set SC speed brushed set SC speed polished set FR20118 SC1051A Slip Steering Shaft The slip shaft is a cut-to-fit design and allows six inches of movement, eliminating binding caused by body flex. Includes a 1"/.75" DD slip shaft and a protective bellows. Note: This shaft requires universal joints (sold separately) "-27" DD shaft ea "-36" DD shaft ea Key Column Wiring Adaptor The key column wiring adaptor is designed to adapt your wiring harness to a Flaming River ignition style column. Important: Not necessary if your previous column had an ignition switch. FR20118 non-original column switch ea River tilt steering columns feature all-new components FR30002S including a one piece cast upper housing design with a keyed GM ignition switch that has the standard GM plug. The ignition switch is located in the 3 o clock position for added comfort and convenience. These columns are manufactured using 2" stainless steel tubing and a high strength, all steel shaft with Teflon coated bearings. They include the tilt lever, turn signal lever and hazard knob. The shift lever with the shift indicator are included on column shift applications. These stainless steel columns are available in unfinished paintable stainless, powder coated black or a beautiful polished stainless finish. Columns are 33" long, with 1"-48 spline shaft and are a direct fit for Nova models; or a column 33" long with a 1"-DD shaft which is good for rack and pinion steering. A stock GM steering wheel from a 1969 and newer GM passenger car will bolt to these steering columns. Important: Reuse of original column to dash clamp is required for installation, with some modifi cation necessary. or use part #FR20300 column strap clamp if you want to save your old column. If you do not want to do that you may use FR20114K and not use the OEM mounting. Floor Shift 1"DD Shaft FR paintable ea FR30001B black powder coat ea FR30001S polished ea Floor Shift 1" - 48 Spline Shaft FR paintable ea FR30002B black powder coat ea FR30002S polished ea Column Shift 1" DD Shaft FR paintable ea FR30101B black powder coat ea FR30101S polished ea Column Shift 1" - 48 Spline Shaft FR paintable ea FR30102B black powder coat ea FR30102S polished ea Steering Column Strap Clamp The steering column strap clamp is used to fit OEM mount features rubber mount for vibration absorption. FR ea Billet U-Joint These billet U-joints are CNC-machined from aircraft steel to precision tolerances. Features sealed needle bearings for longer wear and electroless FR1717DD nickel-plated for corrosion resistance. FR1717DD U-joint-1" DD x 3/4" DD ea FR1758 U-joint-1" DD x 13/16" DD ea Vintage Registration Holder Excellent reproduction of this hard to find accessory. Wraps around steering column and held by springs. Features black crushed grain material as original. CP ea 94 Steering Column Parts Toll Free Order Line

32 Steering Wheels Nova SS Steering Wheel Reproduction steering wheel for 1967 Nova Super Sports. The steering wheels are injection molded and include a reproduction of the brushed aluminum steering shroud and horn buttons. Horn contacts and miscellaneous parts for installation are sold separately. Important: SS horn cap not included (sold separately) ea Deluxe Steering Wheel OER reproduction of the deluxe interior steering wheel assembly for Nova models. This wheel includes the correct spider style insert, originally installed on vehicles with deluxe interiors or optional deluxe steering wheels, comes in black only. Horn button sold separately. Important: Mounting screws for insert are not included. Polished Chrome Spider Insert ea Brushed Chrome Spider Insert ea R6532 walnut steering wheel Bow Tie horn cap steering wheel hub horn/wheel mounting kit steering wheel R3495 R Walnut Wood Steering Wheel Reproduction steering wheel for Nova models equipped with the optional walnut wood wheel. The walnut wheel features correctly coated simulated wood wrapped around brushed aluminum center spokes. Mounting hardware and center cap not included. The steering wheel kit includes: the reproduction walnut wood steering wheel, steering wheel hub adapter, horn mounting kit and Bow Tie horn button steering wheel ea R steering wheel kit kit horn buttons horn contacts horn cap mounting kit 1967 Nova SS Steering Wheel Reproduction steering wheel for 1967 Nova and Chevelle Super Sport models. This steering wheel is injection molded and includes a reproduction of the brushed aluminum steering shroud. The horn center cap, horn contacts, horn buttons and horn cap installation kit are also available. See part #R3495 for complete kit that includes all parts mentioned. R complete kit kit wheel w/horn buttons ea horn buttons w/gaskets set K horn contacts pr K horn cap mounting set set horn cap ea R3492 R3496 R3494 R Nova Steering Wheel Reproduction steering wheel installed on Nova models without the original plastic rim sport style wood wheel. This wheel is manufactured to exact specifications and will fit as original. Steering wheel kits include: wheel, shroud, horn buttons, and contacts. 6 mounting screws included with shroud. No emblem hardware. Note: *No pre drilled holes for emblem on cherry wood insert. Holes are there beneath the insert on the back of shroud to use as a guide. Will need to drill 2 holes threw the insert for the emblem if desired. Colored shrouds have pre-drilled holes. Steering Wheels black ea dark blue ea red ea dark green ea Steering Wheel Kits R black kit R3493* cherrywood kit R dark blue kit R red kit R dark green kit Rosewood Steering Wheel This wheel was optional on any Nova from 6 cylinders to big blocks. The rosewood wheel includes correctly coated simulated wood wrapped around brushed aluminum center spokes ea Dash & Console Components B Reproduction Steering Wheels 95

33 Chevy II/Nova Steering Wheels Your Choice of Brushed or Chrome Spoke Wheel in 4 Assorted Colors! rosewood steering wheel R304511A R304512A Bow Tie horn cap steering wheel hub horn/wheel mounting kit Rosewood Steering Wheel Kits Classic Industries offers this complete steering wheel kit which includes the reproduction rosewood steering wheel, steering wheel hub adapter, horn mounting kit and Bow Tie horn button. R without tilt wheel kit R with tilt wheel kit R304513A R304514A Dash & Console Components B Comfort Grip Steering Wheel Reproduction comfort grip steering wheel which was optional on Nova models. This reproduction is very similar to the original wheel. This wheel will give you the appearance, feel, and status of the original without the high cost of used original GM wheels. The latest manufacturing methods are utilized to insure a reproduction which is as close as possible to the original wheel. The cushion grip wheel features correctly padded foam wrapped around brushed aluminum center spokes as original. Complete kits can be installed with or without tilt steering wheel only ea K wheel (with hub, cap & hardware) w/o tilt kit K wheel (with hub, cap & hardware) with tilt kit A red/white/ blue Bow Tie B blue/silver Bow Tie C black/red Bow Tie D cross fl ags E SS logo " Padded Leather Steering Wheel Set Features a thick padded leather grip for driving comfort and a classic center spoke design and are available in black, tan, gray or red. Each steering wheel kit comes with everything you need to mount the wheel including, steering wheel, mounting hardware kit, chrome or brushed billet aluminum mounting hub, and choice of horn button and ring. Important: Must specify logo suffi x on steering wheel set: A red/white/blue Bow Tie, B blue/silver Bow Tie, C black/red Bow Tie, D cross fl ags, E SS logo. Brushed Spoke Wheel R black kit R tan kit R gray kit R red kit Chrome Spoke Wheel R black kit R tan kit R gray kit R red kit 96 Reproduction Steering Wheels Toll Free Order Line

34 Steering Wheels Bow Tie cap Bow Tie cap cross fl ags cap R30511A R30712A R30612A R30811A mounting set and wheel hub (included with kit) 14" Padded Leather Steering Wheel with Classic GM Style Replace the outdated, uncomfortable stock steering wheel in your classic Chevrolet with one of these modern padded leather steering wheel kits. This wheel features a thick padded leather grip for driving comfort and a classic center spoke design that is reminiscent of the optional sport wheels from the late 1960 s muscle car era. The smaller 14" diameter wheel is easier to manage and provides your dash with a unique sporty look. Each steering wheel kit comes with everything you need to mount the wheel. Includes: the steering wheel, mounting hardware kit, mounting hub and your choice of a Bow Tie or cross flags horn cap. Important: Must specify center type: A brushed, B chrome. Black Wheel Bow Tie Cap R kit R without tilt kit R with tilt kit Cross Flags Cap R kit R without tilt kit R with tilt kit Gray Wheel Bow Tie Cap R kit R without tilt kit R with tilt kit Cross Flags Cap R kit R without tilt kit R with tilt kit Red Wheel Bow Tie Cap R kit R without tilt kit R with tilt kit Cross Flags Cap R kit R without tilt kit R with tilt kit Tan Wheel Bow Tie Cap R kit R without tilt kit R with tilt kit Cross Flags Cap R kit R without tilt kit R with tilt kit R30114 R30271 Upgrade Your Interior with the Distinctive Look of Wood Classic styling meets sports car design with these unique custom steering wheel kits from Classic Industries. This wheel features a contoured wood grip that fits your hand for added driving comfort and a classic center spoke design that is reminiscent of the optional wood wheels from the late 1960 s muscle car era. The smaller 14" diameter wheel is easier to manage and provides your dash with a unique sporty look. Each steering wheel kit comes with everything you need to mount the wheel including: steering wheel, mounting hardware kit, mounting hub and Bow Tie or cross flags horn cap. Wood Grip/Chrome Center Bow Tie Horn Cap R kit R with tilt kit R without tilt kit Cross Flags Horn Cap R kit R with tilt kit R without tilt kit Wood Grip/Black Anodized Center Bow Tie Horn Cap R kit R with tilt kit R without tilt kit Cross Flags Horn Cap R kit R with tilt kit R without tilt kit R30191 R30194 cross fl ags cap Bow Tie cap cross fl ags cap The Distinctive Look of Wood with the Comfort of Leather Get the best of both worlds with this wood and leather wheel from Classic Industries. This wheel features a leather grip surface that fits your hand for added driving comfort and a classic center spoke design, reminiscent of the optional wood wheels from the late 1960 s muscle car era. The smaller 14" diameter wheel is easier to manage and lends your dash a distinguished motorsports look. Each steering wheel kit comes with everything you need to mount the wheel including; steering wheel, mounting hardware kit, mounting hub and a Bow Tie or cross flags horn cap. Wood And Leather Grip/Chrome Center Bow Tie Horn Cap R kit R with tilt kit R without tilt kit Cross Flags Horn Cap R kit R with tilt kit R without tilt kit Dash & Console Components B Steering Wheels 97

35 Steering Wheels W W5652 W W5649 W5899 W5870 W5871 W5876 Classic Series Walnut Steering Wheel This walnut wood steering wheel features finger grips and brushed finish stainless steel spokes. Includes chrome center cap and Bow Tie center emblem. 15" diameter, 4-1/8" deep with adaptor and mounting kit. Important: For use on models without drivers air bag. Will work with or without tilt column. W walnut kit W walnut kit W walnut kit W walnut kit Dash & Console Components B W5196 W Signature Series Wheel GT Rally steering wheels feature a solid 3-spoke design. The molded cushion grip is contoured to the shape of the hand with a leather grained finish for added comfort, control, and driving pleasure. These wheels have durable silver, or black anodized aluminum alloy spokes and includes a matte black rubber styling sleeve. 13" diameter, 3" deep wth adaptor. Mounting kit included. Important: Will work with or without tilt column. W silver anodized kit W silver anodized kit W silver anodized kit W silver anodized kit W black anodized kit W black anodized kit W Signature Series Billet Adaptor These billet mounting adaptors are optional for the Signature Series wheels only. Available in two finishes, these highly polished aluminum housings will replace the matte black rubber styling sleeve and plate included with Signature Series wheels. W black luster ea W black luster ea W black luster ea W polished aluminum ea W polished aluminum ea W polished aluminum ea Signature Series Wheel Horn Button These steering wheel horn buttons are optional for the Signature Series wheels. Two different button styles feature either just a horn button, or a highly polished aluminum housing and button. Both styles will only fit Signature Series wheels. Button W5650 blue insert with silver Bow Tie ea W5660 black insert with red Bow Tie ea W5652 cross flags ea W5649 SS ea W5899 black blank ea Housing W5870 smooth polished aluminum ea W5871 smooth black anodized ea W5876 Bow Tie ea W black anodized kit W black anodized kit W5640 W5630 W5632 W5629 W5895 W5894 Classic Series Wheel Horn Button These chrome steering wheel horn buttons are optional for the Classic Series wheels. Two different button styles feature either a chromed steel cap with logo insert, or a highly polished billet aluminum housing and button. Both styles will only fit Classic Series wheels. W5630 blue with silver Bow Tie ea W5640 black with red Bow Tie ea W5632 cross flags ea W5895 matte black standard blank ea W5629 SS ea W5894 chrome standard blank ea Classic Series Cushion Foam Wheel General Motors offered a Comfortgrip wheel as an option. This wheel being offered is similar in design to the original wheel for much less than the original optional padded wheel. Comes complete with chrome center cap and Bow Tie center emblem. 15" diameter, 4-1/8" deep with adaptor. Mounting kit included. Important: For use on models without drivers air bag. Will work with or without tilt column. W black kit W black kit W black kit W black kit Grant No Wheel-No Steal Security System This fully patented system has proven to be virtually foolproof and safe. It s not affected by motion and it doesn t rely on your battery. Also available is a handy nylon storage bag to protect your wheel when removed, and to store the lock-out cap when the wheel is installed. Important: Can only be used with Grant steering wheels. Not for use on factory original steering wheels. G2001 No Wheel security system ea 2010 steering wheel storage bag ea 98 Steering Wheels Toll Free Order Line

36 Steering Wheels GT Retro wheel with red Bow Tie GT Classic wheel with engraved Bow Tie light walnut wheel with red Bow Tie dark walnut wheel with engraved Bow Tie Polished Billet Black Billet Polished Billet Black Billet standard rise engraved standard rise red high rise red standard rise red high rise red GT Performance Foam Grip Steering Wheel GT Performance foam grip steering wheels set a new standard in comfort and style! Each steering wheel kit includes: a thick foam grip steering wheel, horn button assembly, hub adapter, and grade 8 hardware. Horn buttons and hubs are billet 6061 aluminum and are secured using an exclusive o-ring design. Your choice of black anodized or polished hub and horn assembly. GT Retro Steering Wheel Kits GT Retro wheels are the perfect match for any project. The wheel center is manufactured from 304 stainless steel with a brushed finish and polished edges. 15" diameter with 4.125" dish. Polished Horn Button and Hub Standard Style Horn Button A with engraved Bow Tie kit A with red Bow Tie kit A with engraved Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Black Anodized Horn Button and Hub Standard Style Horn Button A with red Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit GT Classic Steering Wheel Kits The GT Classic steering wheels feature a black cushion grip and a three-spoke chrome center. The 1010 cold rolled steel spokes have classic lightening holes and are been polished and chrome plated for a perfect appearance. 14.5" diameter with 3.5" dish. Polished Horn Button and Hub Standard Style Horn Button A with engraved Bow Tie kit A with red Bow Tie kit A with engraved Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Black Anodized Horn Button and Hub Standard Style Horn Button A with red Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit standard rise engraved standard rise red high rise red standard rise red GT Retro Wood Steering Wheel high rise red GT Retro steering wheels are perfect complement for any classic! These steering wheels feature genuine mahogany wood with a unique V-shaped profile and sculpted finger grips so they fit perfectly in your hands. The wheel centers are manufactured from 304 stainless steel with polished edges and a fully brushed finish. Horn buttons and hubs are billet 6061 aluminum and are secured using an exclusive o-ring design. Each steering wheel kit includes: a thick foam grip steering wheel, horn button assembly, hub adapter, and grade 8 hardware. Light Walnut Wood Steering Wheel Kits Wood with hand rubbed light walnut stain and finished with a glossy polyurethane clear coat. 15" diameter with 4" dish. Polished Horn Button and Hub Standard Style Horn Button A with engraved Bow Tie kit A with red Bow Tie kit A with engraved Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Black Anodized Horn Button and Hub Standard Style Horn Button A with red Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Dark Walnut Wood Steering Wheel Kits Wood with hand rubbed dark walnut stain and finished with a glossy polyurethane clear coat. 15" diameter with 4" dish. Polished Horn Button and Hub Standard Style Horn Button A with engraved Bow Tie kit A with red Bow Tie kit A with engraved Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Black Anodized Horn Button and Hub Standard Style Horn Button A with red Bow Tie kit A with red Bow Tie kit High Rise Style Horn Button A with red Bow Tie kit A with red Bow Tie kit Dash & Console Components B Steering Wheels 99

37 Steering Wheels ST3087 shown with hub and horn button ST3075 shown with hub and horn button A ST3053 ST3076 A detail Dash & Console Components B A GT Pro Touring Sport Steering Wheel The GT Pro-Touring Sport steering wheel was inspired by GM s optional NK4 four spoke Sport wheel installed in various models druing the 1970s. This custom steering wheel offers a modern flair to an already classic design. The black anodized spoke design features a leather wrapped grip with with baseball stitched seam. The polished spoke design features genuine mahogany wood outer grip and perforated leather inner. Horn buttons are machined from 6061 aluminum and are secured using an exclusive o-ring design that keeps it from popping off. Each steering wheel kit includes your choice of a black anodized or polished hub with matching horn button and grade eight mounting hardware. Important: For Flaming River and Ididit steering columns use the 1969 and later kits. Note: Not intended for vehicles with air bag safety systems. Polished 4-Spoke Billet Horn and Hub This kit includes: a 14.5" diameter, 2.375" dish, polished 4-spoke wheel with a polished adapter and your choice of an engraved or red Bow Tie horn button. The horn buttons cover the wheel mounting bolts for a clean, custom look. A engraved Chevy Bowtie kit A engraved Chevy Bowtie kit A red Chevy Bowtie kit A red Chevy Bowtie kit A engraved Chevy Bowtie kit A red Chevy Bowtie kit Black Anodized 4-Spoke Billet Horn and Hub This kit includes: a 14.5" x " diameter, 2.375" dish, black anodized 4-spoke wheel with black anodized adapter and a red Bow Tie horn button. The horn button exposes the bolts that mount the wheel for a high-performance look. Note: The dimensions of this wheel replicate the original NK4 Sport Wheel. A red Chevy Bowtie kit A red Chevy Bowtie kit A red Chevy Bowtie kit X2291 Steering Wheel Pullers Great item to have when replacing your OEM or replacement steering wheel. Can be used for almost any models steering wheel. Allows easy removal of steering wheel. Complete instructions included. K212 standard puller ea X2291 professional puller set STE1032 STE1035 STE1033 STE1006 STE1034 STE1008 STE1007 STE1015 STE1030 STE1023 Volante S9 Custom Steering Wheel Upgrade your steering wheel with one of these attractive and comfortable steering wheels from Volante! Available in a variety of wood and leather styles to complement your car. All wheels feature formed finger grooves and a clear anodized, polished aluminum center. Wheel, hub adapter, and horn button assembly sold separately. 15" Wood Steering Wheels Genuine walnut tone wood steering wheel with decorative rivets and polished aluminum center. 15" diameter with 1.25"dish. ST wood wheel ea 14" Wood Steering Wheels Genuine black ash or walnut grip wood wheels with either tear drop or round hole spokes. 14" diameter with 2" dish. ST " black ash wood wheel with holes ea ST " walnut wood wheel with holes ea ST " black ash wood wheel with teardrop ea ST " walnut wood wheel with teardrop ea 14" Leather Steering Wheels Premium leather steering wheel with your choice of either tear drop or round hole spokes. 14" in diameter with a 2" dish. ST " leather wheel with holes ea ST " leather wheel with teardrop ea ST " leather wheel with solid spokes ea Steering Wheel Components Aluminum Hub Adapters STH bolt wheel hub ea STH bolt wheel hub ea Nova Logo Horn Buttons STE style Nova logo ea STE style Nova logo ea STE style Nova logo ea SS Logo Horn Buttons STE silver SS logo ea STE white SS logo ea STE red SS logo ea Bow Tie Logo Horn Buttons STE with tri-color Bow Tie ea STE with red Bow Tie ea STE with blue Bow Tie ea STE with silver Bow Tie ea 100 Steering Wheels Toll Free Order Line

38 Short Hub Adapter This short hub unit was designed to mount an aftermarket steering wheel/ quick release combination close to the original orientation. Manufactured from the highest quality aluminum using a solid, one piece design for maximum strength and durability. Fits GM, ididit and Flaming River steering columns. Note: Must use with NRG Quick Release or Tilt systems black ea Generation 2.0 Quick Release System These 2.0 quick release units feature many options that conventional Ball-Lock quick release systems do not offer, such as specially designed raised sections to prevent hub stretches and a selflocking mechanism. These units are manufactured BK from highest quality aircraft aluminum with style and function that are designed to last. Available in black with a carbon fiber ring or in a variety of other colors with titanium chrome ring. Note: Must use in conjunction with the Short Hub Adapter. With Carbon Fiber Ring C black ea With Titanium Ring BK black ea GM gun metal ea GL silver ea Generation 2.8 Quick Release System The Gen 2.8 Quick Release provides all the benefits of the 2.0 Generation Systems Ball- Locking quick release system with the added benefit of an upgraded Diamond Cut flared ring. This provides leverage and grip for the pull ring allowing much easier release of the steering wheel. Perfect for race applications where gloves are required. Choose from a selection of colors. Note: Must use in conjunction with the Short Hub Adapter BK black ea GM gun metal ea GL silver ea 1/2" Steering Wheel Spacer Bring your steering wheel closer with this 1/2" spacer. Manufactured from CNCmachined aluminum with counter sunk mounting holes to the hub. and a universal 6 bolt mounting pattern B black ea G silver ea Quick Tilt/Lock System By allowing the steering wheel to tilt out of the way in one quick motion and combining a patented locking system to secure the wheel once the tilt is engaged, this system provides an added layer of anti-theft security without sacrificing convenience. Note: Requires short hub adapter. Not compatible with quick lock or quick release units B black ea G silver ea Steering Wheels NRG s Steering Wheel Adapter System: NRG s modular steering wheel adapter system lets you choose the level of security for your classic vehicle. Pick from a quick release system that removes the steering wheel, a tilt-lock that unlinks the wheel from the column, or for total vehicle security use the Quick Lock system to prevent a would-be thief from placing a steering wheel onto the hub and driving away. removable steering wheel short hub adapter Manufactured from the highest quality aircraft aluminum. All Quick Release units feature a ball locking mechanism. Will work with all GM columns. Compatible with all Flaming River and ididit Columns. NRG Quick Lock System A perfect complement to the Quick Release Systems, these units quickly and easily disable the steering hub by preventing the placement of a steering wheel onto the hub. Manufactured from solid steel and utilizing a Ball-Lock design and key mechanism. Available in various color finishes. Note: Must use with either the 2.0 or the 2.8 quick release system GM gun metal ea GB gloss black ea GL polished ea MB matte black ea NRG Rim Sport Style Wheel NRG Rim Sport NRG steering wheel quick lock unit quick release unit GL series wheel is manufactured from high quality materials, providing the feel of smooth luxurious wood, polished aluminum center spokes and the old school brushed metal feel. Mounts to any six bolt hub or quick release unit and measures 14-1/4" in diameter, and 1-1/2" deep bolt ea NRG Comfort Steering Wheel The NRG comfort grip steering wheel is manufactured from high quality materials with a sophisticated design to provide luxurious black wood and the elegance of chrome center spokes. Will bolt up to any six bolt hub or quick release unit. Measures 14" in diameter, and 2" deep bolt ea C NRG Woodgrain Steering Wheel Add a traditional look to your interior with these 6 bolt woodgrain steering wheels from NRG. Mounts to any six bolt hub or quick release unit. Choose from standard GT style, Formula style, or Racing Style woodgrain wheels. Each features a 13" diameter wheel. Racing and Formula style wheels measure 1-1/2" deep, while the standard wheel measures 1-3/4" deep. Standard Woodgrain Wheels B matte black center ea C chrome center ea Racing Style Woodgrain Wheels B matte black center ea C chrome center ea Formula Style Woodgrain Wheels B matte black center ea C chrome center ea NRG Wheel Replacement Screws Replacement mounting B C screw set for all NRG steering wheels. 6 piece set. Includes hex key black M5-8.0 screws set Steering Wheels 101 Dash & Console Components B

39 Steering Wheel Components 1967 Deluxe SS Horn Center Cap Reproduction horn center cap for 1967 Nova Super Sport models. Includes SS emblem ea Horn Button Cap Retainer Correct plastic retainer which snaps into the steering wheel center. The horn button cap attaches to the outer edges of this retainer. This cap is for the optional 4-spoke steering wheel ea Bow Tie Steering Shroud Emblem Reproduction emblem for all standard Nova steering wheel shrouds. Each emblem features correct black paint with a Bow Tie symbol in the center. Will install on all steering wheel shrouds for ea Horn Button Cap with Wood Wheel This is an excellent reproduction of the original horn button cap used on various models equipped with the optional woodgrain or Comfort Grip steering wheel. This part includes the Bow Tie emblem in the center with a blue background with a red white and blue border. The black area surrounding the Bow Tie includes correct crinkle style black finish replicating the original. Officially Licensed GM Restoration Part ea SS Horn Button Emblem Reproduction steering wheel emblem for Nova SS models. Features the correct red, white, and blue accents and SUPER SPORT lettering. Made in the USA. Officially Licensed by General Motors. N SS horn emblem ea Sport Steering Wheel Emblem Correct reproduction 4-spoke steering wheel horn cap button for models. Emblem inserts into the horn cap (sold separately) Bow Tie w/circle ea Dash & Console Components B 1968 Standard Horn Cap Reproduction brushed finish chrome-plated cap. Each cap is manufactured to exact dimensions and includes the knockout to install a horn button emblem (not included). C ea Horn Button Cap Reproduction of the replacement style horn button cap in black. This cap inserts over the cap retainer on the optional 4-spoke steering wheels ea 1967 Horn Button Emblem Replace your faded or worn 1967 Nova horn button emblem with this reproduction. CM ea 1969 SS Steering Shroud Emblem Reproduction SS emblem installed on all 1969 SS Nova models. This emblem will replace that faded or worn original emblem and add that extra touch to your interior ea 1970 Nova SS Steering Wheel Emblem Reproduction SS emblem installed on 1970 Nova SS steering wheel shrouds. This emblem will replace that faded or missing original emblem. C ea Sport Steering Wheel Emblem Correct reproduction 4-spoke steering wheel horn cap button for models. Emblem inserts into the horn cap (sold separately) Bow Tie w/o circle ea SS Steering Wheel Emblem Correct reproduction SS steering wheel horn cap button for models. Emblem inserts into the horn cap (sold separately) Nova SS ea 102 Steering Wheel Components Toll Free Order Line

40 Steering Wheel Components 1968 Walnut Wood Wheel Hubs This steering wheel hub adapter mounts directly to the top of the steering column and retains the factory wood wheel. These adapters are for use with factory wood wheels or reproduction wood wheels. Note: For use with original or OER reproduction wood wheel chrome ea black ea Steering Wheel Hub Nut Special nut used to tighten the steering wheel to the column assembly. For all steering wheels. G ea black red Rosewood Wheel Hubs This steering wheel hub adapter mounts directly to the top of the steering column and retains the factory rosewood steering wheel. This adapter can also be used for the optional comfort grip steering wheel. Important: For use with original or OER reproduction wood wheel chrome ea black ea Horn Cap Mount and Contact Reproduction horn cap mount and contact assembly for Chevy II/Nova models with the wood, the cushion or comfort grip style steering wheel option ea dark blue dark green Standard Horn Cap Mounting Set This set includes all the necessary components needed to install the horn cap on standard or deluxe steering wheels. Note: May also need to purchase Horn cap mounting ring for models. Not for use on vehicles equipped with optional comfort grip or wood-style steering wheels. K standard wheel set 1967 Deluxe SS Horn Button Contacts Reproduction horn button contacts for 1967 Nova Super Sports. These contacts will assure you get the connections you require to make your horn buttons functional. K pr cherrywood Nova Steering Wheel Shroud Reproduction center steering shroud for Nova and other Chevrolet models including Chevelle, Monte Carlo, El Camino etc. OER manufactured this authentic reproduction shroud for the hard core enthusiast who wants the ultimate in originality! Will install on original GM steering wheels or reproductions. 6 mounting screws included with shroud. No emblem hardware. Note: * No pre drilled holes for emblem on cherry wood insert. Holes are there beneath the insert on the back of shroud to use as a guide. Will need to drill 2 holes threw the insert for the emblem if desired. Colored shrouds have pre-drilled holes black ea red ea dark blue ea dark green ea * cherrywood ea 1967 SS Horn Cap Mounting Set Reproduction of the components required to mount the 1967 Nova SS steering wheel. Horn button and contacts sold separately. K set Steering Wheel Mounting Set Each set includes parts to mount the steering wheel and horn cap. Important: Steering shroud, emblem, and horn contacts not included. K wood wheel set Horn Button Contact Correct reproduction horn contacts for Nova models with standard steering wheel. These contacts will assure you get the connections you require to make your horn button functional ea 1967 Deluxe SS Horn Buttons Reproduction horn buttons and gaskets for 1967 Nova Super Sports. These all new reproductions are designed to replace the worn out or damaged originals. Each button includes a gasket for a complete replacement set K213 K213DB K213R K213DG Steering Wheel Horn Buttons Reproduction horn buttons for Nova steering wheels. Includes LH and RH horn buttons. K black pr K213R red pr K213DB dark blue pr K213DG dark green pr Dash & Console Components B Steering Wheel Components 103

41 Horn Parts Horn Relay Pigtail Wiring is often overlooked as being the cause of a malfunctioning horn. Replace the corroded horn relay pigtail in your Nova model with a reproduction and bring your horn back to full working order. WE ea OER Packaging Delco-Remy Marking OE Design Horn Assemblies Exact reproduction horn assemblies for Nova models. Each horn is manufactured with the correct swirl body design and features the Delco-Remy logo as original. Perfect for Concours correct restorations. Includes a universal mount bracket and hardware for easy installation. Sold in pairs with both high and low note horns pr HR627 HR Reproduction Horn Relay Due to excessive heat and electrical loads the horn relay may become inoperative leaving your vehicle without an operational horn. Replace the burnt-out horn relay in your Chevy II/Nova model with one of these OE quality reproductions. HR ea HR ea ea HR ea Dash & Console Components B frontside view backside view Nova Reproduction Horn Unit Reproduction horn assembly for Chevy II/ Nova models. Available in both high and low tones and produced in the correct swirl configuration. Each horn assembly includes a universal mount bracket and hardware for easy installation high note ea low note ea G GM Nova Replacement Horn Unit GM service replacement horn for Chevy II/ Nova models. Each horn mounts on either the radiator support or the hood lock catch support, depending upon year or model. Note: This is a GM service replacement part which may differ cosmetically from the original, however will function as original. G low note ea G high note ea Delco Horn Relay Switch Replace your original horn relay switch with this genuine Delco horn relay switch. Note: This switch is an original Delco service replacement part and may be somewhat different cosmetically than the original. However, each switch will function correctly the way the factory intended. D Delco ea 1965 Horn Wire Extension Horn wire extension for 1965 Nova models. This is the extension wire needed for the low note horn option. CH ea 104 Horn Parts Toll Free Order Line

42 Floor Consoles Nova SS Consoles Reproduction consoles, bases and tops originally installed on Nova SS models. This quality reproduction has a top plate made cast steel as original. Consoles include: the plastic gear shift slider, the side slider rails and the roll up assembly underneath. These consoles come in automatic or 4-speed models. Mounting hardware available separately. Note: *Console shift plate sold separately. Consoles automatic ea speed ea Console Base Only automatic ea speed ea Console Top Only * automatic ea * speed ea Nova Upper and Lower Console Reproduction of the floor console for Nova models with automatic transmissions. This upper assembly is injection molded for easy installation. Shifter components can be removed from the original console and reapplied, or obtained from a donor car. Console without Shift Plate AT ea Console with 3-Speed at Shift Plate console assembly set Nova Console Assembly Reproduction console originally installed on models. This assembly will replace the original cracked or worn out unit. The console unit consists of the plastic outer shell only. You may use your original shift plate, slider assembly, shift boot or replace them with OER reproductions which are available separately. Note: Modifi cations required to back mounting bracket on models if vehicle did not originally have a console. N ea Nova Shift Plate Reproduction shift plate assembly for Chevy II/Nova models. This black bezel features correct chrome accents and includes the shifter slider and the shift lens automatic ea speed ea Nova Console Assembly Reproduction of the original floor console assembly originally installed in Nova models. This injection molded console will replace the original cracked or damaged factory original. Consists of the correctly produced injection molded outer shel l only as shown. The shift plate, shift slider assembly, rubber shift boot, shift boot retainer, hardware and other components are available separately ea Trans Shift Plate Shift plate for Nova models. Each shift plate is reproduced to exact factory specifications for an as-original fit and appearance. Features proper black fill and bright edging and properly positioned mounting screw holes. Note: *Shifter lens, backing plate and shifter plate bulb retainer are not included and sold separately. Automatic * ea Manual ea Automatic Shift Plate OER reproduction console shift plate for Nova models with a automatic 3-speed transmission. Shift plate must be glued to console. 3-Speed ea Dash & Console Components B Floor Consoles 105

43 Floor Console Components Auto Shift Lens Backing Plate Reproduction of the backing plate originally installed directly below the shift plate lens on all automatic transmission console shift plates ea AT Console Mount Brackets Reproduction brackets used to mount the console to the floor on Chevy II/Nova models. TW automatic set Forward Console Plate OER reproduction of the forward console plate for Chevy II/Nova models. This console plate installs on the front section of the console assembly. Manufactured from stamped steel as original with the correct black color and factory style mounting studs. Includes original style retaining clip and nuts for a complete installation ea MT Console Mount Brackets Reproduction brackets used to mount the console to the floor on Chevy II/Nova models. TW speed set Console SS Emblem Reproduction of the center console emblem for Chevy II/Nova Super Sport models. Each emblem is manufactured to factory specifications and features correct black and red coloration with chrome accent edging. N ea Console Floor Mount Bracket Reproduction console floor mount bracket for Nova models, stamped same as original console bracket to mount console to floor. A ea Dash & Console Components B Forward Console Plate Emblem Small die-cast reproduction emblem that fits directly on the forward section of the console. This emblem is for console plates which were not originally equipped on Nova models ea Console Mount Bracket Reproduction bracket used to mount the console to the floor on models. N set Forward Console Plate Hardware Reproduction of the forward console plate hardware set for models. Each 8 piece set includes 4 clips and 4 nuts to attache the forward plate to the console set 106 Floor Consoles Toll Free Order Line

44 Floor Consoles black black carbon fiber quicksilver carbon fi ber graphite red white peacock TF13700E TF13700E back view Bench Seat Cruiser Console The BC Cruiser console is designed to fit the contour of early bench seats. Installation is fast and simple with a nylon strap under the seat which cinches down to the front of the console. Features large drink holders, storage compartment, padded arm rest, a fully lined interior compartment and a flip up lid with a plastic sleeve to hold important documents. Measures: 18"L x 8-1/2"W (11" at cupholders) x 5"H (7-1/2" including lid) with a 10"L x 6"W x 3"H storage compartment. Note: *Carbon Fiber. TF13700A black ea TF13700B * black ea TF13700C * quicksilver ea TF13700D graphite ea TF13700E red ea TF13700F white ea TF13700G peacock ea TF13600E TF13600F back view Low-Rider Floor Console The Low-Rider floor console is designed to fit the transmission hump. Comes complete with two king size drink holders, a storage compartment with lid, and a convenient storage pouch for items like sunglasses, pens or cell phones. The Low- Rider storage compartment is sized to hold several CDs, cassette tapes or street maps. The Low-Rider console has a unique feature that allows it to fit several different size transmission humps. Underneath the Low-Rider console are two aluminum plates that can be easily adjusted to conform to just about any transmission hump. Measures: 17"L x 8-1/2"W (11" at cupholders) x 6"H at cupholder, 4"H at rear, with a 10"L x 6"W x 3"H storage compartment. Note: *Carbon Fiber TF13600A black ea TF13600B * black ea TF13600C * quicksilver ea TF13600D graphite ea TF13600E red ea TF13600F white ea TF13600G peacock ea HH6367RD HH6371DBL black BK gold GL green GN dark blue DBL orange OR Cupholder Console Made specifically for Nova models WITHOUT factory installed consoles and WITH bucket seats, the Humphugger consoles look like a factory option. Constructed of automotive grade vinyl and double stitched with commercial nylon thread, this accessory console is an extremely durable and practical way to add storage to your classic Nova with absolutely NO modifications to your car. Comes standard with a nicely padded lift up armrest, fully lined interior and two standard sized drink holders. Available in Nova interior colors. Measures approximately 21" L x 8" W x 8"H with an approximate 10"L x 5"W x 5"H storage compartment. Dimensions may vary slightly between years. Call for details. Important: Requires 8" inches in between bucket seats to fi t. *Fits Nova Super Sport with bucket seats only. Requires 6-1/2" in between bucket seats to fi t. Note: Please specify two or three letter color code when ordering. Standard Models HH specify color ea Super Sport Models HH6871 * specify color ea light blue LBL turquoise TQ red RD TF13800A Bench Seat Shorty Cruiser Console The BC Cruiser shorty console is designed to fit the contour of early bench seats. Installation is fast and simple with a nylon strap under the seat which cinches down to the front of the console. Features large drink holders, storage compartment and padded arm rest. Measures: 13-1/2"L x 8-1/2"W (11" at cupholders) x 5"H (7-1/2" including lid), with a 6"L x 6"W x 3"H storage compartment. Note: *Carbon Fiber. TF13800A black ea TF13800B * black ea TF13800C * quicksilver ea TF13800D graphite ea TF13800E red ea TF13800F white ea TF13800G peacock ea Floor Consoles TF13800D back view 107 Dash & Console Components B

45 Console Gauges & Parts Gauge assembly is also available with silver face gauges! Console Temp Gauge OER reproduction temperature gauge for Chevy II/Nova models with the optional console gauge package. Your choice of silver or black. Black is original for models silver ea black ea Console Gauge Cover and Base High-quality reproduction GM console gauge cover bezel and gauge base for Chevy II/Nova console gauges. The cover bezel, which features correct chrome style trim surrounding the gauge area, mounts on the forward section of the console and is used to cover the console gauges. The gauge base is produced in the correct luminous light green color cover ea base ea Console Battery Amp Gauge OER reproduction battery gauge for Chevy II/ Nova models with the optional console gauge package. Your choice of silver or black. Black is original for models silver ea black ea Console Gauge Lens Correct clear plastic lens used to cover the console gauge faces. Each gauge kit requires 2 lenses. The lenses are the same for either front or rear gauges. Important: The original gauge lens mounting clips are unavailable at this time, although R2344 console gauge screw kit contains replacement clips that will function as original required ea Dash & Console Components B Included With Each Pre-Assembled Gauge Package... 1 Fuel Gauge 1 Temperature Gauge 1 Oil Gauge 1 Battery Gauge 1 Console Gauge Cover 1 Console Gauge Base 1 Console Gauge Mounting Connectors 1 Battery Temperature Gauge Bezel 1 Fuel Oil Gauge Bezel 2 Console Gauge Lens 1 Front Gauge Mounting Plate 1 Rear Gauge Mounting Plate Nova Console Gauge Assembly Classic Industries brings back the popular console gauge set for Chevy II/Nova models fully pre-assembled and ready to install into your existing console! Each pre-assembled gauge package includes the oil, temperature, battery and fuel gauges. Each gauge is an exact reproduction of the original. This assembly will install on original GM or OER reproduction consoles. The gauge sets were normally found on high performance models, however, can be installed on any Chevy II/Nova model. Each individual gauge component is also available separately. Install a new set and get the high performance look in your Nova with a complete pre-assembled gauge package. Important: Wiring, bulbs and oil line sold separately. See index for availability black face set silver face set Console Oil Gauge OER reproduction oil gauge for Chevy II/ Nova models with the optional console gauge package. Your choice of silver or black. Black is original for models silver ea black ea Console Fuel Gauge OER reproduction fuel gauge for Chevy II/ Nova models with the optional console gauge package. Your choice of silver or black. Black is original for models silver ea black ea Console Gauge Bezel Classic Industries offers high-quality reproduction console gauge bezels. Each bezel will install just as the originals. Features the words BATT/TEMP on rear bezel and FUEL/OIL on front bezel. Fits Chevy II/Nova models equipped with factory original or reproduction console gauges. Front Bezel fuel/oil ea Rear Bezel battery/temperature ea Gauge Mounting Plate Reproduction of the correct gauge mounting plates diestamped to match the original configuration. The console gauges attach to the plate. Each plate is die stamped for the gauges to attach easily, unlike other reproductions currently being offered by other suppliers fuel/oil ea battery/temperature ea 108 Console Gauges & Parts Toll Free Order Line

46 Console Gauge Parts shown with gauges (sold separately) A shown installed in console A Nova Console Voltmeter Original style voltmeter for Nova models with console gauges. This voltmeter is designed to install in place of the original amp meter to reduce the possibility of an electrical fire. Available with a brushed aluminum or black face and original style markings to match the surrounding gauges. Includes mounting template for installation. A silver ea A black ea Console Gauge Pod The easiest way of adding additional gauges to your interior and maintaining a factory look! It mounts four gauges to your factory console and angles them slightly towards the driver. Manufactured in black ABS and can be painted to match the color of your interior. Features mounting holes for four 2-1/16" gauges. Gauges and console sold separately. AM black ea Console Gauge Mounting Clip Set Reproduction of the console gauge mounting clip set for Nova models. Manufactured to correct specifications, this set includes four clips and screws set Console Gauge Oil Line Correct oil line which is required to allow the oil gauge to operate correctly. 51" long ea Temperature Sensor Unit Original AC Delco temperature sending unit for Chevy II/Nova models with the optional console gauge package. This sending unit is installed into a water jacket in the engine and allows the temperature gauge to function properly. G ea Console Gauge Resistor Reproduction console fuel and temp gauge resistors for Chevy II/Nova models. These resistors are required for correct function of the fuel and temp gauges. KW temp gauge resistor ea Low Fuel Warning Module The console fuel gauge was one of the first of its kind to offer a warning indicator when the fuel was low. This indicator was mounted behind the fuel gauge and activated a light in the dash board warning the driver that the fuel was low. This reproduction is superior in design and construction compared to the original. CG ea Big Block Oil Line Clip Reproduction stamped steel oil line clip for Chevy II/Nova models with a big block engine. This clip mounts to the rear exhaust manifold bolt and guides the oil line to the gauge from the oil fitting on the oil filter mounting boss. GC big block ea C67050G Carbon Fiber Console Gauge Pod This replaces the original console-mounted rally gauges with a REAL carbon fiber gauge pod designed to accept four 2-1/16" aftermarket gauges. Mounts just like the factory panel. Choose glossy or satin carbon fiber. C67050G gloss finish ea C67050S satin finish ea Console Gauge Connectors Reproduction connectors used to mount the wires to the back of the gauges. Includes connectors for all 4 console gauges. The gauge mounting connectors are necessary for the gauges to operate properly set Speed Warning Control Cable A high-quality reproduction of the control cable for Chevy II/Nova models. For use with the desirable and highly sought after RPO code U15 (Speed Warning Indicator) ea Console Gauge Harness This console gauge harness is a perfect duplication of the original, including the correct color and gauge wires. Perfect for replacing damaged originals or as part of a console gauge conversion for a Nova not originally equipped with gauges. Important: In order to correctly convert your Nova to console gauges, you must also replace your under dash, engine and front light harnesses. NV ea Oil Line Block Fitting Original style oil line block fitting with sleeve and nut, used to adapt oil line to the engine block for a console oil gauge. KW ea detail Small Block Oil Line Fitting Reproduction small block oil line fitting for Nova models with correct markings. Includes tall engine block coupler fitting, oil line compression bushing and nut. Can be used for almost any mechanical oil gauge. Brass, 3/4" tall. A ea R Console Gauge Light Bulbs Correct bulbs for all console gauge kits ea R piece kit kit Dash & Console Components B Console Gauge Parts 109

47 Console Components S112 S113 S Shift Slider Seal These reproduction slider seals are precision-cut black polypropylene. Replacing your cracked or faded console shift slider is a great way to enhance your shifter area automatic ea with 4-speed ea or 4-speed ea with console, repro 9.99 ea Console Shift Lens Reproduction automatic shift plate lenses for Chevy II/Nova models with center console. Available for all automatic transmissions including TH700-R4 and TH200-R4 with overdrive for those with upgraded transmissions. S Powerglide ea S TH350 and TH ea S TH700-R4,TH200-R ea Shift Slider Retainers Reproduction shift plate slider retainers for Nova models with automatic or manual trans consoles. This holds the sliders in place on the shift plate. K pr Automatic Console Shifter Seal This is a quality reproduction of the automatic console shifter seal that came on Chevy II/Nova models. This rubber seal will replace your cracked or missing seal and freshen the look of your interior. N ea Shift Plate Bulb Retainer Excellent quality reproduction of the shift plate bulb retainer originally installed on all automatic shift plates. Inserts directly below the shift plate area. The lamp socket installs directly into the retainer ea Four-Speed Shift Boot This boot was originally installed on models equipped with a factory 4-speed floor shift transmission. NJG ea Nova Four-Speed Shift Boot Reproduction shift boot that fits all Chevy II/ Nova models. This boot covers the area which is cut off center of the transmission hump and creates a barrier between the road grime below and the interior of your vehicle. B boot w/o console ea with console ea Four-Speed Shift Boot Plate A correct reproduction speed shift boot plate. This high quality reproduction is produced in steel and will fit all 4-speed Chevy II/Nova models between Available in black and chrome black ea chrome ea Dash & Console Components B S Console Shift Lens Injection molded reproduction clear plastic lens for automatic transmission Chevy II/Nova models. For either powerglide P-R-N-D-L or Turbo transmissions P-R-N Replace your cracked, yellowed or missing shift lens and give your interior a lift. The S121 shift plate pattern is for Nova models that have been converted to overdrive using TH200-4R or TH700-R4 transmissions Powerglide ea TH350, TH ea S TH200-4R,TH700-R ea Automatic Floor Shift Boot Correct reproduction floor shift boot for Chevy II/Nova models equipped with floor shift automatic transmission. This boot acts as a barrier between road grime and the interior of your vehicle. NJG automatic ea Automatic Floor Shift Boot Correct reproduction floor shift boot for Chevy II/Nova models equipped with floor shift automatic transmission. This boot acts as a barrier between road grime and the interior of your vehicle. D ea Four-Speed Shift Retainer w/o Console Reproduction shift boot trim and retainer that fits all Chevy II/Nova models not equipped with a center console. N retainer 2 piece ea MT Boot Retainer Plate with Console Reproduction shift boot retainer plate for speed or 4-speed models with console shift boots ( ). Produced in high grade diecut steel. All mounting holes are pre-punched in correct diameters and locations and 4-speed ea 110 Console Components Toll Free Order Line

48 Accelerator Parts Replace your worn out accelerator pad with an OER replacement. For Chevy II/Nova models Accelerator Pedal Mounting Pin This special mounting pin is just what you need to correct a loose accelerator pad. The special design allows the pad to attach to the accelerator arm correctly and tightly. A common problem which is easy to fix by simply replacing a bent or worn out mounting pin ea Accelerator Pedal Rod Reproduction of the final link in your Nova models accelerator/throttle activation system. This special rod connects between the throttle arm and the accelerator pedal. For V8 models only ea Accelerator Throttle Arm Classic Industries offers a reproduction small block V8 throttle arm. It can be installed on Chevy II/Nova models that came originally equipped with a small block. This quality replacement includes the bushing and sleeve. PP small block ea Accelerator Pedal Pad All models were originally equipped with a floor mounted accelerator pedal pad. This OER reproduction is designed to replace the original exactly ea Needed when converting from 6 cylinder to a V8 engine. K919 K Accelerator Pedal Pad Correct replacement gas pedal which was originally installed in Nova models. This pedal is an OER replacement part which features the same ribbed design as the GM replacement part. Pedal mounts directly onto the accelerator arm which extends from the firewall. Your choice of original material injection molded pedal or a heavy duty steel backed replacement. Trim plate sold separately pedal (steel backed) ea K pedal (ABS plastic) ea K trim plate ea Accelerator Pedal Rod Support Superb reproduction accelerator pedal rod support assembly. This is the assembly which supports the accelerator rod through the firewall. For Chevy II/Nova models. Manufactured from heavy ABS material as original. Note: Not for use with bushing type pedal rod OER ea Accelerator Rod Grommet & Sleeve Reproduction grommet and sleeve unit where rod fits into the linkage. This grommet routinely deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your the throttle rod from becoming loose or sloppy. K required set Accelerator Throttle Arm This is a top quality reproduction of the accelerator throttle arm for Chevy II/Nova models when converting from a 6 cylinder engine to a V8 engine. This is the arm that goes from the accelerator pedal rod at the firewall up to the carburetor rod. Includes the bushing and sleeve ea Accelerator Throttle Rod This is the essential link between the accelerator pedal lever and the carburetor. For vehicles with 4 barrel carburetors w/ ea , 350 w/4 barrel ea Dash & Console Components B Accelerator Parts 111

49 Accelerator Parts Accelerator Lever Cable These are factory service replacements which extend from the carburetor to the accelerator lever and open the carb when the accelerator is pressed ea cylinder ea Chrome Carb Return Spring Bracket This replacement chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high-performance touch to any carburetor ea T Accelerator Pedal Tension Spring An original tension spring which when replaced will allow your gas pedal pad to function properly the way the factory intended. The spring attaches under the gas pedal pad and attaches to the rod assembly promoting the correct tension ratio ea Accelerator Pedal Ball Stud Original factory ball stud for use with Nova models. 1/4"-20 x 1-1/2". Studs can break after years of use and may need to be replaced. Check your original for wear when replacing the gas pedal linkage. 2 required per vehicle. G ea. Throttle Return Spring Sets Mounts to intake manifold on drivers side. Required by many race sanctioning bodies and a great idea for any high-performance car, these intake manifold mounted throttle return spring and bracket kits provide positive throttle return. Includes: chrome brackets, springs, bushings, and fastener. T2386 big block set T2387 small block (w/carb spacers) set K0135 K Accelerator Throttle Rod This rod is for use when modifications will not allow the use of the original rod between the accelerator pedal lever and the carburetor. 14-1/2" long and is threaded up to 11-1/4". Note: Not for use on cable operated applications. G ea Accelerator Control Cable Retainer OER reproduction retainer used to hold the accelerator control cable. Manufactured in white ABS plastic material ea Dash & Console Components B K Accelerator Return Spring Correct reproduction of the commonly missing spring which inserts between the carburetor and water neck. K cylinder ea K big block ea V8 outer ea K V8 inner ea Accelerator Spring Bracket Retainer bracket which holds the rear loop of the throttle return spring in place. This bracket which mounts on top of the coil bracket is for Nova models with small block engines and Rochester Q jet carbs. C ea Universal Accelerator Throttle Rod This rod is for use when modifications will not allow the use of the original rod between the accelerator pedal lever and the carburetor. Bend and shape as needed. 14-1/2" long. Note: Not for use on cable operated applications. AL ea Throttle Return Spring Set Fits Holley 2300 and barrel or Holley 4150 and barrel carburetors mounted on any manifold. DC set C Accelerator Rod Retainer Clip Reproduction of the commonly missing spring loaded clip which is necessary to hold a rod in its place throttle rod clip ea carb rod and clip ea C upper kickdown clip 1.99 ea C upper kickdown clip 1.99 ea 112 Accelerator Parts Toll Free Order Line

50 Pedal Components Chevy II/Nova Park Brake Handle Reproduction park brake handle for Chevy II/ Nova models. This is a superb quality reproduction ea Nova Park Brake Cable Retainer Correct retainer used to hold the park brake cable in place ea M Parking Brake Rod Grommet This OER reproduction grommet is necessary to keep your park brake release rod from rattling ea A Nova Parking Brake Cable Replace your worn out parking brake cable. Each cable will install as original NJG OE style frt and rr kit M rear cable ea M front cable ea A cables only kit A complete kit kit front cable ea A intermediate ea rear cable 2 req ea A cables only kit A complete kit kit A front cable ea intermediate ea A rear cable 2 req ea EC8001B EC80 Under Dash Parking Brake Cable Lokar connector cables are designed to mount directly to the under dash, foot operated brake and connect with Lokar universal rear brake cables. These cut-tofit 6' long cables are available with either a black or stainless steel housing. EC8001 stainless steel housing ea EC8001B black housing ea Universal Rear Parking Brake Cable Lokar universal rear brake cables are designed to work with the Lokar Under dash foot operated brake cables. The outer housing is designed with a specially extruded liner for extended life of the cable, and the stainless cable resists moisture. Features adjustable cable lock and clevis and come complete with two 8' cut-to-fit housings, cables, cable bracket and spacers. Available with either a black or stainless steel housing. EC80 stainless steel housing ea EC80B black housing ea G Parking Brake Release Handle Reproduction parking brake release handles for Nova models. The OER reproduction is manufactured to OEM specifications and features the correct lettering for an exact replacement. Choose between the OER reproduction, the GM service replacement part, or the chrome reproduction handle. All handles will install on your original shaft and feature the words BRAKE RELEASE as pictured. Note: *Not cosmetically correct chrome repro ea black OER ea G6550* black GM ea Rear Shock Plate Park Brake Cable Mounting Bracket Reproduction parking brake cable mounting bracket for Nova models with factory installed multi-leaf rear springs. Excellent when converting from mono-leaf to multi-leaf springs. HC required ea Brake Lamp Switch Retaining Clip Reproduction of the retaining clip that holds the brake lamp switch in place. The retaining clip is designed for 1/2" diameter switches retaining clip ea Park Brake Adjustment Nuts Parking brake cable adjustment nuts for Nova models. Replacement for the right rear cable nuts. A pr Clutch and Brake Pedal Bushings OER reproduction of the often worn nylon brake and clutch pedal bushings. These bushings fit over the brake and clutch cross shafts and help eliminate excessive side to side movement and pedal binding at the pivot. Four piece set. K set Clutch Pedal Return Bumper Replace your worn out or missing clutch pedal bumper with this quality reproduction. This bumper is correct for all Nova models with a manual transmission. G ea Dash & Console Components B Pedal Components 113

51 Pedal Pad & Trim Plate Sets Dash & Console Components B Automatic Pedal Pad Kits These pedal pad sets are designed to replace the original or worn out pedal pads and chrome trim on models. Each set will replace the accelerator pad, brake pad, and park brake pad including chrome trim plates depending on your year and model. Reproduced to exact specifications, each pad will fit as original. Without Trim power brake kit manual brake kit drum brake kit drum brake kit disc brake kit drum brake kit disc brake kit disc brake kit With Trim drum brake kit drum brake kit disc brake kit drum brake kit disc brake kit Manual Pedal Pad Kits These pedal pad sets are designed to replace the original or worn out pedal pads and chrome trim on models. Each set will replace the accelerator pad, brake pad, clutch pad and park brake pad including chrome trim plates depending on your year and model. Reproduced to exact specifications, each pad will fit as original. Without Trim oval kit square kit kit kit kit kit With Trim kit kit kit 114 Pedal Pad. Trim Plate Sets Toll Free Order Line

52 Pedal Pads & Trim Plates AT Power Brake Pad Reproduction brake pad with an automatic transmission and power brakes. Features the words POWER BRAKE. Vertical ribs were original for the Chevy II/Nova models ea AT Brake Pad Reproduction brake pad for Chevy II/Nova models with an automatic transmission and standard brakes. This pad features vertical ribbing ea K Brake/Clutch Pad and Trim Plate Reproduction pad and trim plate for and Nova models with a Muncie M21 transmission. This pad features horizontal ribbing and can also be used for the brake pedal on non power brake vehicles K clutch pad ea K clutch trim plate ea K brake pad ea K brake trim plate ea K982 K Brake Pad Reproduction clutch pad for Nova models with a manual transmission. The pad features a chrome disc brake emblem imbedded in the center of the pad ea A30961 A Clutch Pedal Pad and Trim Plate Reproduction clutch pedal pad installed on Nova models with a manual transmission. A pedal pad ea A trim plate ea MT Power Brake Pad Reproduction brake pedal pad for Chevy II/ Nova models with manual transmission and power brakes. This pad features the correct horizontal ribs and the words POWER BRAKE. A ea MT Brake and Clutch Pad Reproduction clutch and brake pedal pad for Chevy II/Nova with a manual transmission and standard brakes. Choose between oval shaped with vertical ribbing or rectangular shape with horizontal ribbing vertical ribbing ea horizontal ribbing 4.99 ea K Brake Pad and Trim Plate Reproduction brake pad and trim plate for Nova models with an automatic transmission. K pedal pad ea K trim plate ea pedal pad ea Brake Pad Reproduction brake pad for Nova models with an automatic transmission. This pad is for vehicles originally equipped with disc brakes ea 1968 Park Brake Pad and Trim Plate Reproduction park brake pedal pad and trim plate for 1968 Nova models. The 1969 pad does not feature the word PARK. The trim plate was available as an option for this year pedal pad ea trim plate ea Park Brake Pad and Trim Plate Correct OER replacement park brake pad and trim plate for Nova models pedal pad ea trim plate w/dlx int ea Dash & Console Components B Pedal Pads. Trim Plates 115

53 Pedal Components P117 KW831 K Brake Pedal and Clutch Pedal Perfectly constructed brake pedal or brake and clutch pedal assemblies. The brake pedal does not come with bushings. The brake and clutch pedal assembly contain 2 pedals, 4 nylon bushings and 1 retainer clip. Brake Pedal Only without Bushings KW ea Brake and Clutch Assembly K set K set C set set Muscle Car Pedal Assembly Give your interior a fresh look with a Muscle Car Pedal set. This is a direct bolt-in assembly, manufactured from lightweight aluminum and features graphite powder coated arms with silver pedals. Made in USA. Note: *For drive-by-wire applications. Accelerator arm not included. P107* auto DBW set P108* manual DBW set P auto set P manual set Billet Throttle Assembly Manufactured from solid aluminum, each billet throttle assembly is fully adjustable featuring a uniquely designed molded rubber insert, and spring loaded gas pedal. Each assembly is anodized with machined highlights in your choice of gray or black. Made in USA. P black anodized ea FB9000 FB9003 Dash & Console Components B Brake/Clutch Pedal Support Bracket Reproduction brake and clutch pedal support bracket for Nova & Ventura models. Features heavy gauge steel stamping as original and fits automatic or manual pedals. Replaces GM part numbers , , AT or MT ea handle detail dtil Parking Brake Assembly Reproduction parking brake assembly for all Chevy II/Nova models. Designed to OE specifications, each assembly is manufactured to bolt on like original and includes the correct handle with BRAKE raised lettering assembly ea P Muscle Car Pedal Assembly Manufactured from solid billet aluminum, these custom pedal assemblies include a throttle pedal and matching pedal covers for either automatic or manual transmission vehicles. The billet throttle pedal is fully adjustable and features a uniquely designed molded rubber insert and a spring loaded accelerator pedal. Features machined highlights, each pedal assembly is available anodized in your choice of black or gray. Matching pedal covers require no drilling for installation. Made in the USA. Automatic P black anodized set Manual P black anodized set P135 P137 Billet Pedal Cover Designed to match billet throttle assemblies for Camaro, Firebird and Nova. Pedal covers feature an anodized finish with matching highlights. Available in black, gray with uniquely designed rubber inserts. No drilling is required. Available for manual and automatic applications. Made in USA. P135 black automatic ea P137 black manual ea FB9004 FB9001B Under Dash Park Brake Pedal Assembly This foot operated park brake assembly gives you ease of operation along with a clean, out of the way appearance. Available in 2 styles and 3 different finishes, these pedal assemblies feature dash-to-firewall adjustability, adaptable mounting location capability, and hidden, heat treated gears and mechanisms for an uncluttered finish. They also include a rubber stop for quiet pedal return, as well as complete hardware and instructions. Connector cables sold separately. Billet Aluminum Solid Ball Milled Arm FB9000 with ball milled pad ea FB9001 with rubber inserts in pad ea CNC Cutout Arm FB9002 with ball milled pad ea FB9003 with rubber inserts in pad ea Chrome Billet Aluminum Solid Ball Milled Arm FB9004 with ball milled pad ea FB9005 with rubber inserts in pad ea CNC Cutout Arm FB9006 with ball milled pad ea FB9007 with rubber inserts in pad ea Black Billet Aluminum Solid Ball Milled Arm FB9001B with rubber inserts in pad ea CNC Cutout Arm FB9003B with rubber inserts in pad ea 116 Pedal Components Toll Free Order Line