Valves from Brass and Stainless Steel
|
|
- Melina Chapman
- 5 years ago
- Views:
Transcription
1 Valves from Brass and Stainless Steel measuring monitoring analysing pmax. PN 2 tmax. +80 C : /8 to 3 /8 NPT to NPT Weld ends: N 5 to N Needle valves Angle-seat valves lobe valves 0 / / Ko / 0 KOBO offices exist in the following countries: ARENTINA, AUSTRIA, BEIU, BRAZI, CANAA, CINA, FRANCE, ERANY, REAT BRITAIN, ITAY, NETERANS, PERU, POAN, SWITZERAN, USA, VENEZUEA KOBO essring mb Nordring ofheim/ts. (0692) Fax (0692) info.de@kobold.com Internet: odels: NA-, Z, ZZ, AC, AB, BF, A, BE 55
2 Needle valve, stainless steel, model NA-, NA-Z, NA-ZZ escription Stainless steel needle valves are used to vary the flow cross section, thus regulating the flow volume. The flow is regulated by a cone-shaped valve that is moved by means of a spindle away from or toward the valve seat. The amount of flow change is determined by the size of the resulting angular gap between the cone and seat. The rate of flow change is determined by how much the valve spindle is turned as well as the pitch of the valve spindle thread. aterials Body stainless steel.457 Upper part stainless steel.457 Spindle stainless steel.457 land packing PTFE land stainless steel.457 Union nut stainless steel.430 and wheel molded resin esign two-part screwed body, with screwed-on upper part Connections /8 to /4 (IN ISO 228/) female thread, male thread, female and male thread /8 NPT to NPT female thread Temperature range -20 C to +20 C Nominal pressure PN 2 Female thread Female thread NPT Female/male thread ale thread N N NPT N N t t I I imensions and ordering details (example: NA-ZR 06) NPT Female/male thread thread Female thread ale thread NPT thread Female thread N 2 t l k v- value m 3 /h Weight kg /8 /4 /8-27 NPT /4-8 NPT -8 NPT -4 NPT -4 NPT -.5 NPT NA-ZR 06 NA-ZR 08 NA-ZR 0 NA-ZR 5 NA-ZR 20 NA-ZR 25 NA-R 06 NA-R 08 NA-R 0 NA-R 5 NA-R 20 NA-R 25 NA-ZZR 06 NA-ZZR 08 NA-ZZR 0 NA-ZZR 5 NA-ZZR 20 NA-ZZR 25 NA-N 06 NA-N 08 NA-N 0 NA-N 5 NA-N 20 NA-N /4 - NA-ZR 32 NA-R 32 NA-ZZR =-thread; 2 = NPT-thread 56
3 Needle valve,, model NA-AC escription KOBO NA-AC -needle valves allow economical regulation of the flow volume of liquids and gases. The amount of flow change is determined by the size of the resulting angular gap between the cone and seat. The flow is regulated by a cone-shaped valve that is moved by means of a spindle away from or toward the valve seat. The rate of flow change is determined by how much the valve spindle is turned as well as the pitch of the valve spindle thread. aterials Body CuZn 39Pb3F37 Bonnet (s 58) Spindle (s 58) Packing bottom-ring (s 58) Spindle seal /8 to = NBR to 2 = PTFE land nut (s 58) and wheel plastic esign two-part screwed body, with screwed-on upper part Connections female thread /8 to 2 (as per IN 259) Temperature range max. +00 C Nominal pressure PN 00 NA-AC Ø imensions and ordering details (example: NA-ACR 06) k V -value m 3 /h /8 /4 /4 NA-ACR 06 NA-ACR 08 NA-ACR 0 NA-ACR 5 NA-ACR 20 NA-ACR 25 NA-ACR NA-ACR NA-ACR
4 lobe valve, stainless steel, model NA-AB esign Two-part screwed body aterials Body stainless steel.4408 Cover stainless steel.4408 etallic internal parts stainless steel.440 asket metal/metal Connections female thread /4 to 2 (as per IN 2999) Temperature range -30 C to +30 C Nominal pressure PN 6 NA-AB imensions and ordering details (example: NA-ABR 08) Weight kg /4 /4 NA-ABR 08 NA-ABR 0 NA-ABR 5 NA-ABR 20 NA-ABR 25 NA-ABR 32 NA-ABR NA-ABR
5 lobe valves,, model NA-BF esign Two-part screwed body aterials Body Cover etallic internal parts asket NBR Connections female thread /4 to 3 (as per IN 2999) Temperature range -0 C to +90 C Nominal pressure PN 0 NA-BF imensions and ordering details (example: NA-BFR 08) Weight kg /4 /4 NA-BFR 08 NA-BFR 0 NA-BFR 5 NA-BFR 20 NA-BFR 25 NA-BFR 32 NA-BFR NA-BFR NA-BFR NA-BFR
6 Angle-seat valves, stainless steel, model NA-A esign Two-part screwed body aterials Body stainless steel.4408 Cover stainless steel.4408 etallic internal parts stainless steel.4404 asket PTFE ounting position any, note specified direction of flow Connections female thread to 2 (as per IN 2999) weld ends N 5 to N (as per IN 3239) Temperature range -20 C to +80 C Nominal pressure PN 6 NA-A B d imensions and ordering details (example: NA-AR 5) Weld ends N female thread weld ends IN 3239 Ø B IN 3239 Ø IN 3239 Ø d / NA-AR 5 NA-AR 20 NA-AR 25 NA-AR 32 NA-AR 40 NA-AR NA-AW 5 NA-AW 20 NA-AW 25 NA-AW 32 NA-AW 40 NA-AW
7 Angle-seat valves,, model NA-BE esign Two-part screwed body aterials Body Cover etallic internal parts O-rings Seat gasket NBR EP Connections female thread to 3 (as per IN 2999) Temperature range -0 C to +90 C Nominal pressure PN 6 NA-BE imensions and ordering details (example: NA-BER 0) Weight kg /4 2 NA-BER 5 NA-BER 20 NA-BER 25 NA-BER 32 NA-BER 40 NA-BER NA-BER NA-BER NA-BER
8 For information on our products for pressure measurement technology, see our brochures»p, P2 and P3«Pressure auges Pressure Sensors Pressure Switches Brochure P Brochure P2 Brochure P3 For information on our products for level measurement technology, see our brochures»n and N2«evel onitoring evel easurement Brochure N Brochure N2 62
Valves from Brass and Stainless Steel
Valves from Brass and Stainless Steel measuring monitoring analysing pmax. PN 2 tmax. +80 C : G 8 to G 3 8 NPT to NPT Weld ends: N 5 to N Needle valves Angle-seat valves Globe valves KOBO companies worldwide:
More informationBrass Ball Valves 2- and 3-Way Ball Valves with Screw Thread
Brass Valves 2- and 3-ay Valves with Screw hread measuring monitoring analysing pmax. PN tmax. +60 C Connections: /4 to 3 screw For steam, gaseous, liquid and viscous media with handle Also with IN-V approval
More informationBrass Ball Valves 2- and 3-Way Ball Valves with Screw Thread
Brass Ball Valves 2- and 3-ay Ball Valves with Screw hread measuring monitoring analysing pmax. PN tmax. +0 C Connections: 4 to 3 screw For steam, gaseous, liquid and viscous media with handle Also with
More informationBall Valves with Pneumatic Actuator Screw Thread and Flange Connection, Welded Connection
Ball Valves with Pneumatic Actuator crew Thread and Flange Connection, Welded Connection measuring monitoring analysing pmax. PN 64 tmax. +60 C Connections: crew thread G to G 4 Welded connection N 5 to
More informationDifferential pressure gauges with Bourdon tube
Differential pressure gauges with Bourdon tube Nominal dia. and with movement of Brass or stainless steel measuring monitoring analysing Description These pressure gauges are suitable for measuring of
More informationCompressed Air-Supply Meter
Compressed Air-Supply Meter measuring monitoring analysing Completely assembled measuring system for precise supply metering and leakage measurement even with low throughputs Economical with direct mass
More informationHygienic Installation Systems
D E S Hygienic Installation Systems EHEDG and 3-A certified measuring monitoring analysing G R O U P E U R O E A N I G N H Y G I E N I C I P M E N T E Q U Hygienic mounting, confirmed by EHEDG and 3-A
More informationAccessories for Pressure Gauges
Accessories for Pressure Gauges measuring monitoring analysing KOBOLD companies worldwide: ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, DOM.
More informationBall Valves with Electrical Actuator Screw-on and Flange Connection, Weld Ends
Ball Valves with lectrical Actuator Screw-on and Flange onnection, Weld nds measuring monitoring analysing pmax. PN 6 tmax. +60 onnections: screw thread / to / weld ends 5 to 50 flanges 5 to 50 V D, 30
More informationTurbine Wheel Flow Meter
Turbine Wheel Flow Meter Plastic Version for Liquids measuring monitoring analysing Model: TUR with transmitter Model: TUR with pointer indication Measuring ranges: 0.2-5.0 to 2.5-100.0 m 3 /h water Measuring
More informationHigh Precision Turbine Wheel Flow Meter for Liquids
High Precision Turbine Wheel Flow Meter for Liquids measuring monitoring analysing Measuring ranges: 0.006-0.1 to 10-500 L/min water Measuring accuracy: ± 1.25% f. s. pmax: 345 bar; tmax: 135 C Viscosity
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationOperating Instructions for Flow Indicator. Model: DAA
Operating Instructions for Flow Indicator Model: DAA 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationNGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.
Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,
More informationTWL-Exia. Resistance Thermometers according to DIN. Ignition Protection Exia. Pt 100-sensor class A respectively class B
Resistance Thermometers according to DIN Ignition Protection Exia measuring monitoring analysing TWL-Exia O O Measuring range: -...+600 C OO Pt 100-sensor class A respectively class B OO Output: resistance
More informationCapillary Thermometers according to DIN Nitrogen Filled Option: Contacts
Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationDWU. Paddle Bellows Flow Monitor. for liquids. 1-5 l/min m 3 /h water OAccuracy: ±3... ±5% of full scale OConnection: O
Paddle Bellows Flow Monitor for liquids measuring monitoring analysing DWU OMeasuring O ranges: 1-5 l/min... 900-3600 m 3 /h OAccuracy: O ±3... ±5% of full scale OConnection: O G ⅜... G 2, ⅜" NPT... 2"
More informationOperating Instructions for Magnetic Filter. Model: MFR-00
Operating Instructions for Magnetic Filter Model: MFR-00 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationMAN-P. Diaphragm Pressure Gauges. according to EN for Stringent Demands
Diaphragm Pressure Gauges according to EN 837-3 for Stringent Demands measuring monitoring analysing MAN-P Housing: mm, 160 mm Connection: G ½, open measuring flange DIN/ANSI Material: stainless steel
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationH 58 H 59. Custom Made. Custom Made
58 Custom ade Custom ade 59 ff Custom ade 60 Custom ade 61 ff ff ff ff ff Custom ade 62 Custom ade 63 m ff ff ff ff 64 Custom ade Custom ade 65 FF Port diameter 1/8 1/4 3/8 1/2 3/4 1 DE 17.2 21.5 25.5
More informationPSR/PSE Paddle Flow Monitor for Liquids Switching ranges: L/min water p max : 250 bar, t max
Paddle Flow Monitor for Liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼ NPT... 1 ½ NPT : or stainless steel
More informationStem Thermometers according to DIN Nitrogen Filled / Optional: Contacts
Stem Thermometers accoring to DIN 16205 Nitrogen Fille / Optional: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
More informationC-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
More informationMMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display
Insertion Resistance Thermometers with, or without measuring monitoring analysing MMA OEconomically-priced O digital thermometers with optional plug-on display O O Compact construction with or without
More informationFlow. Oval Wheel Flowmeter Model DOE
Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DOE Measuring range: 0.5 36 l/h und 1 40 l/min Viscosity range: 1 1000 cp Accuracy: ±1% of reading Material: stainless
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationPaddle Flow Monitor Model PSR/PSE
Paddle Flow Monitor for liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼" NPT... 1 ½" NPT S3 : or stainless
More informationVortex Flowmeter Model DVE
Vortex Flowmeter Multi-Parameter measuring monitoring analysing DVE Measuring range Liquids: 5.2-157... 284-85371 m³/h Air: 89-1463... 26915-2467081 Nm 3 /h (20 C, 0 bar rel) Saturated steam: 81-938...
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationSTC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationDN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank
ISO 9001-2008 Size : Ends : Min Temperature : Max Temperature : DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank Materials : Brass Page 1 sur 10 SPECIFICATIONS
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationStop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationCheck valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationGF Piping Systems Datasheet Ball Valves
Type 546 Ball Valve PROGEF Stanar With butt fusion spigots IR-Plus oel: aterial: PP- esigne for easy installation an removal Ball seals PTFE Integrate stainless steel mounting inserts z-imension, valve
More informationStandard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure
Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety
More informationFan-coil valves Series
Fan-coil valves Series 11-11 - 411 Main features Complete range in the following versions : -way - DN: 1/, /4, 1 -way - DN: 1/, /4, 1 -way with 4 ports - DN: 1/, /4 - The -way version and the -way versions
More informationTTM. Sheath Thermocouples. Flexible sheathed cable C. Sheath diameter from 0.5 mm. O O Sheath in stainless steel 1.
Sheath Thermocouples measuring monitoring analysing TTM Flexible sheathed cable OMeasuring O ranges: -50... +1100 C O O Sheath in stainless steel 1.4571 or Inconel O O NiCr-Ni oder Fe-CuNi thermocouples
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
More informationModel: TUR with transmitter. Output: pulses, 0-20 ma, 4-20 ma or 0-10 V, LED display, pointer indication, switching output
Turbine Wheel Flow Meter plastic version for liquids measuring monitoring analysing Model: TUR with transmitter TUR Model: TUR with pointer indication Measuring ranges: 0.2-5.0... 2.5-100,0 m 3 /h water
More informationDOR. Insertion Paddle Wheel Flowmeter/Monitor. for low viscous liquids. Flow range: ,300 l/s to ,000 l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flowmeter/Monitor for low viscous liquids measuring monitoring analysing DOR Flow range: 0.25 6,300 l/s to 0.4 49,000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
More informationVortex Flow Meter Model DVH
Vortex Flow Meter measuring monitoring analysing DVH Measuring range: 3-8... 3057-280187 Nm³/h Accuracy: ± 0,7 % of reading (liquids) ± 1 % of reading (gases and steam) p max : 100 bar abs; t max : 400
More informationOperating Instructions SNV01/SNV02
10 Brent Drive Hudson, MA 01749 Tel: +1-978-212-0006 Fax: +1-978-568-0060 Borsigstrasse 24 D-65205 Wiesbaden-Nordenstadt Tel: 06122 / 7055-0 Fax: 06122 / 7055 50 Operating Instructions SNV01/SNV02 Needle
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationOperating Instructions for Plastic Flow Meter. Model: KSK
Operating Instructions for Plastic Flow Meter Model: KSK 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationAngle Seat Valve 7010
Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationDiaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
More informationOne-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal
Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is
More informationTHOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
More informationHANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
More informationVC & VPC Series Check Valves
VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one
More informationSafety break-away couplings Breaking bolt series
Safety break-away couplings Breaking bolt series 1 How it works before and after emergency disconnect The SBCouplings, safety break-away couplings has three external break bolts. In the case of axial tension
More informationValves. Valves Range 1340 Double Check Valves PN16. Material Specification
Valves Range 1340 Double Check Valves PN16 Material Specification 1340-1/2" - 2" No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon
More informationART. 60 Ball valve one pieces body
COMMODITY valves ART. 60 Ball valve one pieces body Za.Ve.Ro. API 6D/BS 5351 fl oating ball Valves, full and reduced bore, are one piece screwed body, side entry, blowout proof stem, fi tted with antistatic
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationSeries 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
More informationI N F L O W S Y S T E M S VALVULA DE RETENCIÓN
PROUC TOS Y SOUCIONES EN REES E FUIOS PROUCTS AN SOUTIONS I N F O W S Y S T E M S VAVUA E RETENCIÓN CHECK VAVE Index 0 0 0 0 07 08 09 0 7 8 0 Features of ual Plate R wafer dual plate check valve R0 class
More informationPressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationPNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
More informationFittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
More informationGF Piping Systems Datasheet Ball Valves
atasheet Type 546 Ball Valve Stanar PVF With butt fusion spigots metric oel: aterial: PVF esigne for easy installation an removal Integrate stainless steel mounting inserts -imension, valve en an union
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationValves, controls + systems Boiler connection system Regumat-130 DN 25
Valves, controls + systems Boiler connection system -1 N The Oventrop Quality Management System is certified to IN-EN-ISO 1 Technical information Application: The Oventrop boiler connection system Regumat-1
More informationDOR. Insertion Paddle Wheel Flow Meter/Monitor. for Low Viscous Liquids. Flow range: l/s to l/s. Flow velocity range: 0.
Insertion Paddle Wheel Flow Meter/Monitor for Low Viscous Liquids measuring monitoring analysing DOR Flow range: 0.25 6300 l/s to 0.4 49000 l/s Flow velocity range: 0.3-10 m/s Viscosity range: low viscous
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationSH Stainless Steel Piping System
Stainless Steel Piping Systems SH Stainless Steel Piping System 2018 PRICE LIST Industrial Applications Heating Compressed Air Closed Water Circulation Systems ry Fire Water Mains Solar SH system pipes
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationwith pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
More information