3201 S. Standard Avenue, Santa Ana, CA SouthPoint CIrcle, Brownburg, In Taillight Assemblies Now Available

Transcription

1 Summer Sale The World s Largest Manufacturer of Chevy Restoration Parts SAVE NOW THRU LABOR DANCHUK 55 Taillight Assemblies Now Available (800) S. Standard Avenue, Santa Ana, CA SouthPoint CIrcle, Brownburg, In taillight Housing Assembly Now everybody gets the best of the best 100% Made in the USA! We ve always made the nicest bezels and lenses on the market but we just recently finished the housings, which now enable us to offer 1955 owners the same great deal that was only available to 56 & 57 car nuts. These assemblies come with everything you need to completely refresh and beautify the taillights on your project. We spared no expense on the tooling and promise you will be more than satisfied with these beautiful parts. Made in the United States of America Complete Assembly...# $275.95/pr Bezels Only...#153...$75.95/pr Housings Only...# $39.50/ea. Fin Moulding and Insert All right you 57 owners the wait is actually over. Not only are these parts perfect in every way but since we make them both you can save some money and buy them from us with the inserts installed. We spared no expense with every piece of these beautiful mouldings and inserts. They are 100% Made in the USA using top quality materials and tooling. The pins on the inserts are precision turned on a screw machine and the mouldings can be rifled to reveal the smoothest finish imaginable. We are very proud of these parts and we hope you enjoy them. Made in the United States of America Insert, w/ Pins Attached, Bel Air, exc. Wagon...# $61.00/ea Moulding Only...# $99.95/ea Fin Moulding & Insert...#14790A... $149.95/ea. Customer Counter Open in Indiana Danchuk is happy to announce we ve opened a Walk-In/Will Call counter at our warehouse in Brownsburg, Indiana. Since we opened in late 2006 you ve always had the option to come and pick-up your parts to save on shipping (after you ve placed your order over the phone), but now if you just want to drop-in and get what you need, you can. Located in the center of Indiana, just West of Indianapolis, Brownsburg is home to many of the top drag racing and sprint car teams. We are located just 15 minutes from Indianapolis Motor Speedway, home to the famous Indianapolis 500, and only a short 5 minutes away from O Reilly Raceway Park. O Reilly is home to the US Nationals of Drag Racing, held each Labor Day weekend, as well as the Indy Super Chevy Show, sponsored by Danchuk, held every July. So if you need parts for your 55, 56 or 57 Chevy, and you are within driving distance, come see us. Our warehouse is stocked with thousands of part numbers ready for you to take home to your project. We accept most major credit cards, checks and money orders but no cash at this time. Out of state residents must pay Indiana sales tax on your purchases. Rocker Panel Mouldings Now it doesn t matter if you have a 1955, 1956 or You can get the most incredible Made in the USA rocker panel mouldings from one place. We use only top quality stainless steel and first class tooling. Made in the United States of America # $154.95/pair # $154.95/pair 1957 (Shown)...#537C... $131.95/pair 451 Southpoint Circle, Brownsburg, Indiana (317) Walk-In Hours: Mon. - Fri. 8:00 AM - 3:30 PM EST Closed Weekends

2 Ordering Instructions Minimum order is $10. Actual shipping charges will be added to Visa, MasterCard and Discover orders. Prepaid orders add 10% of the order subtotal ($10 minimum), plus $12 for each oversized item marked with an O/S symbol, and $5 for each item marked with the A/H symbol. Orders prepaid by check may be held until funds clear. Foreign orders pay actual freight. Federal Express rush services are available at an extra charge. California residents add 8.75% sales tax, and Indiana residents add 7% sales tax. Mail Orders: Personal checks, cashier s checks, and money orders accepted, as well as Visa, MasterCard, Discover and COD. Mail orders must be received by September 5, 2009 to receive sale prices. Telephone Orders: Orders Only (all 50 states & Canada) (800) Orders, Inquiries & Technical Questions (714) Fax Orders & Inquiries (714) the Danchuk Summer Sale Payment by Visa, MasterCard, American Express, Discover or COD are accepted for telephone orders. online Orders: Orders can be placed over the internet through our website at Go to our online catalog to place order. Form must be submitted no later than September 7th, 2009 to receive sale prices. Inquiries and questions can be forwarded to the following addresses: info@danchuk.com orders@danchuk.com Walk-in Orders: No additional discounts during holiday sale. Shipping Procedures: COD Orders: Due to carrier regulations, we are unable to accept cash as payment for COD orders. Therefore, all COD orders must be paid for by money order, cashier s check or personal or business check only. We must have the valid telephone number of the check writer in order to pre-approve your personal or business check prior to shipping your order. As always, COD orders are charged $9.00 per package, plus actual freight. Oversized Items: Oversized items are those which exceed the normal size and/or weight limitations of our selected carriers and are therefore charged an additional fee to ship. Those items are noted throughout our catalog and internet site using the O/S symbol. Charges for Oversize items will be applied to your credit card or COD order total when your order is processed. If you choose to send us a check or money order, please add 10% of the order subtotal, ($10 minimum), plus $15 for each oversize item orders. This fee applies to all shipping method and carriers. Additional Handling: In addition to the oversize items (O/S), there are also some items that are charged an additional handling fee by our carriers. These items are noted throughout the catalogs and our internet site using the A/H symbol. The additional handling fee is $7.50. This will be charged to your credit card or COD order at the time of processing. If you choose to send a check or money order, please add $7.50 for each item marked A/H. This is only a summary of our shipping policies. Please call our customer service department with any questions, or refer to our catalog for complete policy information. The GM Restoration Parts, Bel Air, Nomad, Two Ten, Fisher Body, Guide, Chevrolet and bow tie emblems are trademarks of General Motors Corporation and are used under license. Sale Prices End: Saturday, September 5th 2:00 PM PST for PHONE orders, Monday, September 7th 11:59 PM PST via Internet 2 DANCHUK MANUFACTURING, INC. (800) or

3 the Danchuk Summer Sale Original Smoothie Chrome Bumper Bullets - MADE IN THE USA! Just because GM missed the boat doesn t mean you have to. These 100% Made in the USA jewels are simply phenomenal. Die cast and triple chrome plated, these parts will give your front end the beautiful custom look it deserves. Choose from our original contours or our full custom Smoothie look Original Style...#330A... $79.95/pair 1957 Smoothie Style...#330B...$79.95/pair 1957 Original Black Rubber...#330...$39.95/pair Bumper Insert This metal insert was standard equipment on all 57 s, but was removed to install the rubber bumper bullets, part # # $30.50/set Grille Bar Assembly This once hard to find item is now back in stock at Danchuk. Place your order today before Santa grabs them all! Our 1957 grille bar assembly was developed directly from original GM blueprints and you can't get any closer to original than that. Our seven-step chrome plating highlights an incredibly smooth, hand-polished surface. We manufacture a flush-fitting emblem, backpainted in true red, white and blue, and mount it to the grille bar with a removable mount kit. Then, we add our lenses, lens gaskets, screws, parklight housings and light bulbs. All you have to do is fasten it to your grille and plug it in! Not only is our grille bar superior in quality, it is the best value on the market. Made in the United States of America #966...$279.95/ea Grille MouldingS Made in the USA Lower Bar Only... # $175.00/ea Curved Ends... # $73.75/pr Hood Bar Only... # $175.00/ea Complete Set including Hood Bar, Sides and Bottom... # $378.00/set 1956 Lower Grille Moulding Made in the USA Chrome... # $265.00/ea. WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 3

4 Sizzling Summer Savings 1955 chrome grille Made in the USA #478...$230.00/ea Chrome grille Made in the USA. 1956, Oversized Shipping... #479...$265.00/ea Aluminum Grilles Made in the USA. Aluminum, stamped and anodized in gold for the Bel Air models, and in silver for the 210 and 150 s. You get precision, color and price! 1957 Gold... #460...$94.50/ea Silver... #460A...$94.50/ea & 56 Grille Tie BarS When time or a street light pole takes its toll on your tie bar, Danchuk has you covered. The 56 s are newly tooled 100% Made in the USA parts are exactly like GM made them back in If original is not the look you re after, then you will love our beautiful chrome pieces. We just finished the tooling on our 1956, and we're proud to say they are spectacular in both black and chrome Black... # $49.50/ea Chrome... # $79.00/ea Chrome... # $85.45/ea Black... # $49.50/ea. 4 DANCHUK MANUFACTURING, INC. (800) or

5 the Danchuk Summer Sale #14791 Hood Bars and Extensions Hood bars haven t been this good since the fifties and maybe not even then. We now officially make all three of the hood bars right here in the United States of America using brand new A-class tooling. We spent over a year of hard work to make all of the molds to absolute perfection and our efforts have paid off ten-fold. All of these parts are not only perfect in shape and fit, but you literally can t get a better quality casting to work with. We still hand work, fit and inspect each and every casting prior to sending them off for the best quality chrome plating job money can buy. You can t make the hood bars without some perfectly matching extensions. When we set out to make all the hood bars we knew that they just wouldn t be complete without the extensions. Our extensions next to our hood bars match so perfectly you won t believe it. Made in the United States of America Hood Bar and Extensions 1956 Bar...#461...$189.00/ea Extensions...# $139.95/pr Bar and Extensions...# $283.50/set 1957 Hood Bar and Extensions 1957 Extensions...#473...$139.95/pair 1957 Bar and Extensions...# $283.50/set Hood Birds It is what s up front that counts! The hood birds are some of the most distinctive parts on the 1955 and 1956 Chevys. Our show quality reproductions feature supersmooth surfaces and beautiful chrome plating. Made in the United States of America #472...$157.95/ea. Hood Rocket Assembly Our reproduction of this timeless sculpture is practically flawless. We designed our assembly to fit together properly, with the parts appearing as a solid whole when assembled. Zinc die cast and triple chrome plated. Each kit includes two rockets, two scoops, two backing plates and hardware. Parts sold separately also include appropriate hardware. Made in the United States of America #467...$215.95/set Sale Prices End: Labor Day Weekend! #484...$157.95/ea. HOOD HINGE HARDWARE KIT 1957 Stainless...# $16.25/kit 1957 Plated...# $15.25/kit Stainless...# $16.25/kit Plated...# $15.25/kit WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 5

6 SAVE BIG ON THESE PARTS MADE IN USA New 57 Chrome Bel Air Scripts We ve been manufacturing these for the better part of two decades and it shows in their craftsmanship. Each raw casting is hand deburred to remove any flaws prior to their triple plate process. As with all our beautiful American parts, we copper buff each script to achieve the best quality plating possible. Made in the United States of America #539A...$51.95/pair Hood & Trunk emblems w/ bezels 1955 Hood Emblem (Shown)...#371...$61.00/ea Trunk Emblem...#371A...$61.00/ea V8 Hood Emblem...#373A...$50.00/ea V8 Trunk Emblem...#374A...$50.00/ea. Bel air SCRIPTS Chrome...# $48.50/pair 1957 Gold...# $52.00/pair 1957 Aluminum Show Quality (Gold)...# $71.00/pair Bel air crests Gold...# $37.75/pair Chrome...#365A... $37.75/pair Aluminum Show Quality (Gold)...# $61.00/pair Chevrolet SCRIPTS 1957 V8 Bel Air, Forged (Gold)...# $43.25/ea V8 Bel Air, 13...#541...$21.50/ea & 150, Die Cast (Chrome)...#541A...$21.50/ea & # $36.00/pair 1957 hood & trunk vees (V8) 1957 Hood, Bel Air, Gold...#590...$76.50/ea Hood, 150 & 210, Chrome...#590A...$76.50/ea Trunk, Bel Air, Gold...#592...$76.50/ea Trunk, 150 & 210, Chrome...#592A...$76.50/ea Nomad & Continental Kit, Gold...#591...$28.75/ea Continental Kit, Chrome...#591A...$30.50/ea. "Fuel Injection" Script A perfect script has been needed in the industry for decades and now we have it. We recently tooled-up from scratch to make the most beautiful script in everyway. It looks and fits exactly like General Motors did back when they were new. Gone are the days of bent, broken or rough finishes. Made in the United States of America #382...$44.00/ea. Fuel Injection Flags Emblem Painted in beautiful red, white, and black on chrome, this outstanding reproduction is mounted on the front fenders for all production fuel injection cars. A true symbol of speed #381...$71.95/ea Chrome Vees (V8) 1956 Front...# $48.50/ea Rear...# $48.50/ea WHEEL SPINNER ASSEMBLY # $150.00/set 6 DANCHUK MANUFACTURING, INC. (800) or

7 the Danchuk Summer Sale Bel Air Aluminum Side Panel Inserts We established our company s reputation early with parts like these Bel Air side panel inserts. When we introduced them in 1978 their quality was the highest attainable, but we ve never been content to leave well enough alone. After much research and experimentation we have found a way to produce a brighter panel while adding an extra level of protection to the material as well. Grooves are precision-cut to the original depth and width, showing off the subtle contrast between the polished ridges and the buff-finished grooves. All panels are precision stamp formed to fit the quarter panel exact and come assembled with gold-finished Bel Air scripts and crest emblems (part #539 and #365), but can be ordered with the forged scripts and emblems (part #2341 and #2342) if you desire. All parts are Made in the United States of America Bel Air 2-Door Hardtop, Sedan, Convertible, Nomad (Shown)... #573...$517.50/pair 1957 Bel Air 4-Door Hardtop... #573A...$540.00/pair 1957 Bel Air 4-Door Sedan... #573B...$540.00/pair 1957 Bel Air 2-Door Hardtop Sedan, Convertible, Nomad (No Holes, w/out Emblems and Crests)... #573C...$495.00/pair 1957 Bel Air 2-Door Hardtop Sedan, Convertible, Nomad w/ Chrome Emblems... #573D...$517.50/pair 1957 Bel Air 2-Door Hardtop, Sedan, Convertible, Nomad w/ Forged Emblems... #573S...$508.50/pair 1957 Bel Air 4-Door Hardtop w/ Forged Emblems... #573S1...$530.00/pair 1957 Bel Air 4-Door Sedan w/ Forged Emblems... #573S2...$530.00/pair 1955 Bel Air Side Mouldings These highly polished, stainless steel moldings have been duplicated according to original specifications, including rolled backside flanging. Mounting clips are sold separately. All 2 & 4 Door exc. Nomad, Front Fender, Driver...#700...$43.95/ea. All 2 & 4 Door exc. Nomad, Front Fender, Passenger...#701...$43.95/ea. Rocker Panel Mouldings Now it doesn t matter if you have a 1955, 1956 or You can get the most incredible Made in the USA rocker panel mouldings from one place. We use only top quality stainless steel and first class tooling. Made in the United States of America #696...$154.95/pair #697...$154.95/pair 1957 (Shown)...#537C...$131.95/pair Sale Prices End: LabOr Day Weekend Fin Moulding Moulding and Insert All right you 57 owners the wait is actually over. Not only are these parts perfect in every way but since we make them both you can save some money and buy them from us with the inserts installed. We spared no expense with every piece of these beautiful mouldings and inserts. They are 100% Made in the USA using top quality materials and tooling. The pins on the inserts are precision turned on a screw machine and the mouldings can be rifled to reveal the smoothest finish imaginable. We are very proud of these parts and we hope you enjoy them. Made in the United States of America Insert, w/ Pins Attached, Bel Air, exc. Wagon...# $61.00/ea Moulding Only...# $99.95/ea Fin Moulding & Insert...#14790A...$149.95/ea. Accessory Gas Door Guard Guard fits all models except the Nomad #489...$28.75/ea. WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 7

8 Save thru Labor Day 1957 Fender Louvers Our fender louvers are anodized gold for the Bel Air and silver for the 210 (they can be added to the 150). We improved upon the design by adding a threaded stud to the back for easy installation. This enhancement, plus the Danchuk quality has made this a highly sought after part. Includes hardware. Made in the USA Bel Air, Gold...# $48.50/set , Silver...#530A... $48.50/set 1957 Chrome...#530B... $50.00/set Outside rear view mirror Originally an accessory item, this mirror is recognized today as a driving and appearance standard. Since Danchuk can never leave good enough alone, we ve reworked the base tooling and switched to a local die caster and plater for the best Made in the USA workmanship you can get. They fit both driver and passenger sides. Gasket and mounting hardware included #531...$56.95/ea FENDER EXTENSIONS This pair of chrome plated extensions is what you need to bring the original gleam up front # $103.50/pair Glove Box Lock Set w/ Original Style Keys... # $23.50/set Inside Rear View Mirror We manufactured these original design parts with the quality fine restorations demand # $23.50/ea. LIcense Plate Frames 1957 Gold...#189...$62.00/ea Chrome...#189A...$62.00/ea. Rear License Plate Bracket Incorporates all the detail of the original, including rubber bumper. Made in the USA. Fits all models except Station Wagon, Nomad and Sedan Delivery #148...$18.00/ea INSTRUMENT CLUSTER BEZEL SET This set is created from brand new, completely American tooling for a fit that is without flaw and chrome plating that is literally as good as it gets. Now included in this kit are the lenses and color inserts, Part #609B # $71.00/kit Front License Plate Brackets Out front, this is the part that takes the first bump! If yours has been straightened one time too many, start fresh with one of these stamped brackets. Painted in durable black. Made in the USA #608...$13.45/ea #608A...$13.45/ea #608B...$13.45/ea Chrome Instrument Cluster Upper Moulding # $55.00/ea. 8 DANCHUK MANUFACTURING, INC. (800) or

9 the Danchuk Summer Sale 217A 217B C 217D Bel Air Dash Trim Made in the USA #217...$150.00/set #217A...$150.00/set #217B...$150.00/set 1955 No Holes... #217C...$150.00/set 1956 No Holes... #217D...$150.00/set Seat Belts Let s face it, driving without a seatbelt in 1955 may not have been that dangerous, but today it s right up there with parachuting without a parachute. Protect yourself and the ones you love with these beautiful belts. The colors are brilliant and have been matched as close to the originals as possible. All belts have a chrome buckle and come with a mounting kit. Belts are sold as one-person sets /ea. Front, Black... #10329 Front, Dk Blue... #10330 Front, Blue... #10331 Front, Green... #10332 Front, Dk Green. #10333 Front, Dk Brown.#10334 Front, Tan... #10335 Front, Gray... #10336 Front, Silver... #10337 Front, Red... #10338 Front, Copper... #10339 Front, Turquoise.#10340 Front, Maroon... #10341 Front, Ivory... #10342 Front, Orange... #10343 Front, White... #12251 Rear, Black... #10344 Rear, Dk Blue... #10345 Rear, Blue... #10346 Rear, Green... #10347 Rear, Dk Green.. #10348 Rear, Dk Brown.. #10349 Rear, Tan... #10350 Rear, Gray... #10351 Rear, Silver... #10352 Rear, Red... #10353 Rear, Cooper... #10354 Rear, Turquiose. #10355 Rear, Maroon... #10356 Rear, Ivory... #10357 Rear, Orange... #10358 Rear, White... #12252 Seat Belt Reel Eliminate the annoyance of unwound seat belts in your classic Chevy with these prewound seat belt reels. Installed in seconds, these reels keep belts neat and clean and available for easy use. One needed per seat belt, sold in pairs. All... # $23.50/pair Sale Prices End: Labor day Weekend 1957 Dash Bezels 1957 Chrome... # $44.95/set SUNVISOR SUPPORT BRACKETS # $28.95/pair WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 9

10 Have some Fun in the Sun Cruisin in your Classic Sill plates Door...#575...$49.50/pr. HORN RINGS & Horn ring Assemblies We ve been making the horn kits and emblems for over 20 years so we figured it was about time to make top quality horn rings. We cut brand new molds for the Bel Air and the 1957 Bel Air & 210 last year and couldn t be happier with the end result. Our horn rings are made dead perfect to originals with the exception that we put a show quality prep & chrome job on them. You won t find a better reproduction than Danchuk. Each assembly set includes one of our new horn rings, a horn cap and the Bel Air or 210 emblem. Made in the United States of America Bel Air...#252...$103.50/ea Bel Air & #255...$90.00/ea Horn Ring Assembly, Bel Air (Shown)...# $130.00/set 1957 Horn RIng Assembly, # $130.00/set Bel Air Cigarette Lighters The cigarette lighter was considered a necessity in the 50 s, and if your lighter is burned out or missing, finish your dash with this assembly. Each set includes lighter, socket and retainer. A 7-amp inline fuse holder also comes with each set for extra circuit protection # $35.95/ea # $35.95/ea # $35.95/ea. Under Trunk Lid Installation Kit # $24.25/kit Inner core with windlace end stops Hardtop & Convertible... # $16.25/pair HORN CapS Our correctly reproduced horn cap assembles into the horn ring as smoothly as the original did in Bel Air & # $28.95/ea w/ Emblem, Bel Air... #256A... $52.00/ea w/ Emblem, #256B... $52.00/ea horn cap emblems Bel Air...#257...$28.75/ea #258...$28.75/ea. Gas Gauges You replaced your sending unit and still have inaccurate fuel level readings? The problem may be in the gauge and these reproductions fit into the dash design perfectly. Correct color and markings # $149.50/ea # $149.50/ea. 10 DANCHUK MANUFACTURING, INC. (800) or

11 the Danchuk Summer Sale Floor Mats with Crest Logo These custom mats are fabricated in colors designed to match most Chevy applications. Crest is molded in and colored red, white, silver, gold, and blue. Set of four. Made in USA. Black...# $75.50/set Red...# $75.50/set Blue...# $75.50/set Green...# $75.50/set Turquiose...# $75.50/set Tan...# $75.50/set Gray...# $75.50/set Custom Carpet Floor Mats Wow! Are these the best of all world s or what? We took the configuration of the original rubber mats, added carpet and a custom logo for a completely custom and unique floor mat specifically designed to fit the s. These mats are a top quality Made in the USA product that is certain to upgrade the appearance of your classic s interior. Give your universal, fits-any-car mats the ol heave-ho and put a set of these incredible new gems where they belong. Crest Logo, Black...# $89.95/set Crest Logo, Blue...# $89.95/set Crest Logo, Red...# $89.95/set Bel Air Logo, Black...# $89.95/set Bel Air Logo, Red...# $89.95/set Bel Air Logo, Blue...# $89.95/set Factory Accessory Floor Mats These are the original accessory items that were available from the factory in 1955 and 1956, with colors keyed to coordinate with the interiors. The bow tie detail is located at the center of each floor mat. Actual size is 17-3/4" x 16". Set of two. Made in the USA. Black...# $45.00/set Red...# $45.00/set Blue...# $45.00/set Green...# $45.00/set Turquoise...# $45.00/set Copper...# $45.00/set WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 11

12 SAVE DANCHUK (800) Parklight Housing Backing Plates No small undertaking but worth every minute of the work that went into these. With all of the complex compound radius bends, these parts were quite the job, but we are proud to say that they have turned out absolutely beautiful. We start these with a top quality steel and then go the extra mile by putting a hand polish and first rate American chrome plating job on them. Made in the United States of America # $117.00/pair 1956 w/ Parklight Housings... # $234.00/pair Cloth Windlace This woven fabric replacement part is for use on sedan models only and is available in many of the most popular interior colors. See the Upholstery section for vinyl windlace used on all hardtops, convertibles, and Nomads. Sold by the yard. 2 door sedans and wagons require 8 yards; 4 door sedans and wagons require 14 yards. Black... #529...$10.75/yd. Blue... #529B...$10.75/yd. Gray... #529G...$10.75/yd. Green... #529GN...$10.75/yd. Red... #529R...$10.75/yd. Taupe... #529T...$10.75/yd. Parklight housing assemblies Another fine example of Danchuk not being able to leave good enough alone. We have just recently added a perfect pressed-in bulb socket to both of these housings to make an already fantastic couple of parts even better. As with all our parts, we make these exactly like originals except that we put even better copper-buffed chrome plating on them. We add all the necessary parts to our complete sets, lenses, gaskets, harnesses, bulbs and all mounting hardware. And of course these housings are Made in the USA Complete Assembly...# $112.50/set 1956 Complete Assembly...#1080A... $144.00/set Back-up light assembly #310...$124.00/set 1957 License Plate Light Assembly 1957 except Wagon, Nomad, Sedan Delivery... # $42.25/set License Light Assemblies 1955 All Models; Wagon, Nomad, Sedan Delivery...#485B... $35.00/set 1956 Hardtop, Sedan, Convertible...#485C... $35.00/set 12 DANCHUK MANUFACTURING, INC. (800) or

13 the Danchuk Summer Sale 1955 Headlight bezels w/gaskets These beauties are a true testament to the quality and craftsmanship Danchuk strives for. Featuring all new tooling these, 100% Made in the USA bezels fit and look exactly as per GM originals #593...$88.95/pr taillight Housing Assembly Now everybody gets the best of the best 100% Made in the USA! We ve always made the nicest bezels and lenses on the market but we just recently finished the housings, which now enable us to offer 1955 owners the same great deal that was only available to 56 & 57 car nuts. These assemblies come with everything you need to completely refresh and beautify the taillights on your project. We spared no expense on the tooling and promise you will be more than satisfied with these beautiful parts. Made in the United States of America Complete Assembly...# $275.95/pr Bezels Only...#153...$75.95/pr Housings Only...# $39.50/ea Taillight Housing Assembly Included is all mounting hardware, reflectors, seals, gaskets and a pair each of our spectacular red taillight lenses and clear back-up light lenses. Made in the USA # $422.00/set 1956 headlight bezels w/gaskets These perfect reproductions are also 100% Made in the USA from new molds for a better look and fit. Rubber seals and hardware included # $84.95/pr TAILLIGHT HOUSING ASSEMBLY These beautiful taillights have brilliantly lit up our classics rear ends since 1957, but now we ve created perfect reproductions that fit, dare we say, better than the originals. We put hours into handworking each casting and then plate them with show quality chrome, and then finish them off with light bulb sockets, bulbs, gaskets, studs, screws, seals and gorgeous Danchuk red lenses. Made in the USA #965...$328.50/pr headlight bezels Simply Beautiful! Attention to detail shows the highly polished surfaces, the painted black air intakes and the gorgeous chrome palting. Seals and mounting hardware included. Made in the USA #877...$206.95/pr. Sale Prices End: Labor Day Weekend Taillight Dust SHields & Retainers # $21.50/pr. Under Taillight Reflector emblems #499...$20.50/pr. WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 13

14 HOTTEST DEALS ARE AT DANCHUK ignition switches with Cylinders and Keys #119A...$75.50/set #118A... $75.50/set Lenses 1955 Back-Up, Clear Lens...#483...$11.50/pr Parklight, Clear Lens...#486...$11.50/pr Parklight, Amber Lens...#486A...$11.50/pr Taillight Lens...#495...$11.50/pr License, Clear Lens...# $11.50/ea Taillight Lens...#487...$11.50/pr Back-Up, Clear Lens...#488...$11.50/pr Parklight, Clear Lens...#490...$11.50/pr Parklight, Amber Lens...#490A...$11.50/pr Taillight Lens...#491A...$11.50/pr Parklight, Amber Lens...#494A...$11.50/pr Parklight, Clear Lens...#494...$11.50/pr Back-Up, Clear Lens...#492...$18.95/pr License, Clear Lens...#485...$6.95/pr License, Amber Lens...#493A... $9.95/ea. ignition switches # $61.25/ea # $61.25/ea. Headlight Switches Without these your headlights and dash lights will be dark. Our #117A is an exact reproduction of the GM original with the built in fuse. So, if your original is giving you trouble, we have the switch for you , Trucks, Vette... #117A... $37.75/ea. LOWER IGNITION WIRE SHIELDs Protect your ignition wires from damaging engine heat! Application: replacement, 1957 reproduction, and 1957 Corvette reproduction # $26.95/ea. Dome Lenses The heat of the dome light will yellow almost any plastic, and eventually the old lens will wear out. The ideal solution is our correctly reproduced dome lens. You can bring bright light back to your interior by replacing those old dome light lenses Sedan & Wagon; Hardtop..# $9.95/ea Nomad, 55 Hardtop...# $6.95/ea. Sale Prices End: Labor Day Weekend Powerglide neutral safety switches Automatic transmissions require a working neutral safety switch, and if you have a back-up light assembly, those lights are useless without one Powerglide... # $20.00/ea Powerglide... # $20.00/ea. Turn Signal Switch with wiring #409...$22.50/ea. 14 DANCHUK MANUFACTURING, INC. (800) or

15 the Danchuk Summer Sale Chrome Battery Boxes What s a hot rod without some chrome under the hood? We just made new stamping tools for these parts and have really stepped the quality up a notch. We use only the best American steel and finish them off with our top quality show chrome. These are real show stoppers for the chrome fanatic. Made in the USA Side Mount, Louvered...# $229.45/ea Side Mount, Louvered...#2429A...$233.95/ea Side Mount, Ribbed...# $229.45/ea Side Mount, Ribbed...#2430A...$233.95/ea Top Mount, Louvered...# $229.45/ea Top Mount, Louvered...#2432A...$233.95/ea Top Mount, Ribbed...# $229.45/ea Top Mount, Ribbed...#2433A...$233.95/ea. ORIGINAL STYLE Chrome Battery BoxES # $89.95/ea # $89.95/ea. CLASSIC UPDATE Complete Wire Harnesses If you are wanting to update your wiring in your the classic update series harness kit is the way to go. These kits have given the builder complete flexibility to use original stock switches and components as well as custom updated accessories, such as Dakota Digital, Vintage Air, and Ididit Steering Columns. Each kit comes with all the switches and sockets needed # $427.50/kit # $427.50/kit Battery Hold- Down Kits We tooled-up from scratch the better part of a decade ago to turn out these magnificent hold-downs. As we are sure you have found, the results are perfect. Not only did we stamp them exactly like the original, but we went a step further and gave them a show quality black powder coating to step-up the appearance and durability. And of course we did all of this 100% in the United States of America. Show quality look and American pride, it doesn t get any better than that. Also, don t let the wording fool you on these 1957 s; we may not call them show quality but I wouldn t toss them out of the engine compartment for eating crackers if you catch my drift. Made in the United States of America Chrome...#312C... $53.95/ea Chrome...#314C... $94.50/ea. battery boxes Both sturdy boxes are reproduced in a heavy gauge steel and powder coated black #311...$34.25/ea #313...$34.25/ea. Antenna AssemblIES # $61.25/set #789...$61.25/set WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 15

16 Sizzling Summer Savings Turn Signal Chrome Arm with Knob Any part that is handled every time the car is driven is bound to wear out eventually. This easily installed part has been beautifully reproduced to original specifications # $9.95/ea. Chrome Steering Box Covers Plain...# $66.50/ea Louvered...# $66.50/ea Ribbed...# $66.50/ea. Traction Bars # $149.95/pair 605 Chrome Steering Box Covers Louvered for 605 Box... # $88.95/ea Ribbed... # $88.95/ea. urethane shackle Bushings # $33.50/set # $33.50/set Leaf Springs These springs are made from all new steel, not re-arched and rebuilt like others. Our five-leaf spring is a heavy duty version for all passenger cars. Each spring order includes front bushing, pre-pressed into the spring for an easier installation. Springs are painted black. For bolts, see #11294 in our catalog All Models...# $189.00/pair Idler Arm Bearing kit # $89.95/kit Upper Ball Joint Two are needed per car #050...$35.95/each Lower Ball Joint Two are needed per car #051...$35.95/each Monroe Shocks Monroe uses a low pressure nitrogen gas in these shocks to virtually eliminate shock fade. That means that they provide a quicker, more consistent response to road irregularities, and increase roll stability without increasing ride harshness. Monroe gas shocks are ideal for use with radial or bias-ply tires. For even better handling, see our front and rear anti-sway bars shown on page 180 of our catalog. Mounting hardware included Front, Sensa-Trac...#186...$35.00/each Rear, Sensa-Trac...#187...$35.00/each Shock Support A little rust can jeopardize the support of the entire rear end! This shock support is a sturdy and easily installed fix for this very vulnerable area. Weld this support into place and stop worrying about that rust-prone trunk floor! Available for all frames except nomad and wagons. Please see the sheet metal section for standard trunk floor repair sections exc. Nomad & Wagon...#950...$39.95/each 16 DANCHUK MANUFACTURING, INC. (800) or

17 Sale Prices End: Labor Day Weekend the Danchuk Summer Sale V8 Fan Shroud /16", ABS Plastic... # $89.95/ea. V8 Fan Shroud in 6 Cyl. Mount Position /16", ABS Plastic... # $89.95/ea. Chrome Radiator Covers w/o Shroud, Pyramid Peak...# $150.00/ea w/o Shroud, Louvered...# $150.00/ea w/o Shroud, Ribbed...# $150.00/ea w/ Shroud, Pyramid Peak...# $225.95/ea w/ Shroud, Louvered...# $225.95/ea with Shroud, Ribbed...# $225.95/ea Lower, Louvered...# $98.50/ea Lower, Ribbed...# $98.50/ea. RADIATOR CONVERSION BRACKETS Allows you to mount a 6 cylinder radiator to a V8 core support or V8 radiator to a 6 cylinder core support # $43.95/pr. TIE ROD ENDS Two needed per car Outer... #054...$28.00/ea Inner... #055...$37.95/ea. Desert Cooler Radiators They drop right into your favorite tri-five and feature the lastest cooling technology. V-8 owners can choose from either standard or high-effiency styles. High efficiency models are recommended for A/C and performance applications. Each unit includes side shims, transmission line fitting, petcock and drain hose making for an easy instalation. If the radiator is mounted on the engine side of the core support, you have a V8 core support. If it s on the grille side, then it s a 6 cylinder support. Radiators fit both standard and automatic transmission equipped cars, and don t forget to order a fan shroud, parts #2428 and #2537 for the best in cooling performance. Made in the USA Hi-Efficiency, 4 Row, V8 Position... #337...$359.95/each TIE ROD ADJUSTMENT SLEEVE Two needed per car # $33.50/ea. Heater Control Valves (& Truck)...#014...$50.00/ea #013...$43.50/ea. WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 17

18 Save thru Labor Day Trunk Latch Assembly If 50 years of wear and tear have left your assembly performing less than perfectly, replace it today with one of our brand new reproductions. All of the tooling for this part is brand new and it shows in the functionality of the parts # $72.00/ea. Trunk Lid Plate 50 years of wear and tear can leave this important plates functioning less than desired. We made brand new tooling and finished it off to look exactly like original Upper...# $37.75/ea Lower...# $25.95/ea. Trunk and Glove Box Lock Set A trunk lock, glove box lock, and two keys make up this quality set. The face of the trunk lock is stainless steel. Trunk lock does not fit wagons #386...$36.00/set Window Fur channel kits Door Hardtop...#172...$76.50/set Door Hardtop...#173...$76.50/set Convertible...#176...$76.50/set Sedan Del., Utility Sedan...#174A...$89.95/set Door Sedan with No Vent Windows...#174B... $126.95/set Door Sedan, Utlilty Sedan with No Vent Windows...#174C...$99.95/set Door Sedan...# $126.95/set Door Sedan...# $139.95/set Door Station Wagon...# $132.95/set Door Station Wagon...# $132.95/set Nomad...# $114.95/set Windshield wiper escutcheons 1955 (150).#208...$38.50/set #210A...$39.95/set #210...$39.95/set ELECTRIC WIPER MOTOR COVERS Louvered... # $78.95/ea Ribbed... # $78.95/ea Plain... # $78.95/ea. Hood Hinges Replace those worn, loose hinges with new ones. These hinges are designed to have the look, function and fit of the original. To complete the job, use with our hood springs, part #475, #476 or #477. We recommend lubricating all pivot points # $124.95/pair # $143.95/pair Hood Hinge Hardware KITS 1957 Stainless...# $15.95/kit 1957 Plated (Not Shown)...# $15.25/kit Stainless...# $15.95/kit Plated...# $15.25/kit 18 DANCHUK MANUFACTURING, INC. (800) or

19 the Danchuk Summer Sale OUtside door handle sets Door Hardtop/Conv. & Vette...#794...$79.95/set Door Hardtop, Nomad, Wagon, Sedan...#794A...$79.95/set Window seals 1955 Windshield for 150, w/o Chrome...#568...$37.95/ea Vent Window, Hardtop & Conv...#565...$51.95/set Vent Window, Sedan...#565A...$51.95/set Rear, 2-Door Hardtop...#569...$37.95/ea Rear, 4-Door Hardtop...#569A...$37.95/ea Rear, Bel Air & 210 Sedan...#570...$37.95/ea Nomad...#627...$25.25/ea & 4-Door Sedan...#839...$52.50/ea. inside door handles Washers and clips included #367...$25.95/pair rear quarter glass seals Door Wagon... #849...$47.95/pair Door Wagon... #850...$49.95/pair Nomad... #651...$56.95/pair rear quarter drain stop rubber bumpers Convertible... # $25.25/set Door handle Guards #369...$38.95/pair #370...$38.95/pair Door and Ignition Lock Sets Two keys, ignition lock, and two door locks make up each set. The faces of the door locks are stainless steel, and the ignition lock turn handles are die-cast and chrome plated. Check your existing lock set carefully before ordering Flat Pawl... #385A...$44.95/set Long Pawl (Shown)... #385B...$44.95/set NOMAD & WAGON TAILGATE CABLE RETRACTOR # $47.95/ea. Gas tank filler & Vent hose kit #2645D...$39.95/kit Gas Filler Neck & Check Valve Kit Prevents splash back during acceleration. Can be installed in s by cutting filler pipe # $31.50/kit WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 19

20 SAVE DANCHUK (800) Replacement Fuel Pumps Interruptions in fuel flow can mean poor performance and failure. This part is easily replaced and will ensure you many more years of safe driving pleasure Cyl...# $42.25/ea V8...# $52.00/ea. Gas Tanks While you re busy roasting chestnuts on an open fire, your beautiful Chevy is sitting in cold storage for the winter months. Why not treat your classic to the gift that keeps giving the whole year through, an original design gas tank. Just think... some gas tanks have over 50 years of dirt, rust, and sludge sitting at the bottom. Running your tank dry could put that evil brew right where it hurts: in your engine. While cleaning the tank will solve the immediate problems, the real solution is one of these original design gas tanks. These tanks have all the correct details, including the threaded sending unit mount and mounting strap depressions exc. Nomad & Wagon...# $198.95/ea Fits Nomad & Wagon, exc. 9-Passenger Wagon...# $198.95/ea exc. Nomad & Wagon...# $198.95/ea Fits Nomad & Wagon, exc. 9-Passenger Wagon...# $198.95/ea. Gas Tank Sending Units with Filter Hardtop, Sedan & Conv...#195...$59.95/ea Nomad, Wagon (exc 9-Psngr.)...#195B...$59.95/ea /8", Dual 4BC, F.I...# $57.95/ea. shift Linkage kit For Turbo Hydra-Matic column shifting. Powder coated rod with plated hardware #952...$23.50/kit Stainless Steel Gas Tank Mounting Straps with Bolts Replace those old rusty straps with our beautiful stainless ones Hardtop, Sedan & Convertible...# $33.25/pair Sale Prices End: Labor Day Weekend Starter Bracket If you want to put a TH350 or TH400 transmission in your V8 and would like to continue using the stock starter, then this gem is just what you need. Note: can also be used on 1957 with broken starter mounts # $94.50/ea. 20 DANCHUK MANUFACTURING, INC. (800) or

21 Sale Prices End: Labor Day Weekend the Danchuk Summer Sale Clutch pedal return springs #348...$22.95/set #349...$22.95/set Clutch Cross Shaft Both clutch cross shafts shown here are exact reproductions, correct in every dimension. You ll notice a marked improvement in clutch movement after replacing your original with one of these # $24.50/ea. Clutch Fork #342...$42.75/ea Body mount sets Hardtop...#532...$85.95/set Sedan, Nomad, Wagon...#532A...$77.75/set Convertible...#532B...$42.50/set See catalog for hardware, Part # motor mount set Two needed per car #198...$27.50/set #12564 Master Cylinder Covers Plain... # $89.95/ea Louvered... # $89.95/ea Ribbed... # $89.95/ea. Transmission Cross Member Works with Turbo Hydra-Matic 350, 400, 200R, 700-R4 and 4L60-4L80 transmissions (these we know for sure, there may be more). Parts #12564 needs transmission cross member end brackets #1003, shown above on right. Parts #12196 through #12199 end brackets require welding for installation. For complete installation, use transmission mounts #977 or #977A Rear...# $75.00/ea. Transmission Side mount conversion kit TH350, TH400...#870...$75.95/kit Engine Side Mount Conversion Kits Race-proven and time-tested, these conversion kits are the best way to add modern motor mount strength to 1958 and later small and big-block engines. Brackets are easily welded to the frame, and side motor mounts (part #976 shown below) are bolted to the block. Please verify frame style before ordering. Includes hardware to bolt brackets to frame only. Part 871 is for use with part #871...$51.95/kit Seamed Frame, BB or SB w/hei, 3/4" Forward...#871A...$56.75/kit WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 21

22 Summer Savings won t Last Rocker Panels # Our rocker panels are factory reproductions, featuring the same structural backside flanging found on the original parts. Body work is no place to settle for a cosmetic cover-up, and with these parts, you re doing the job right. Dimensions for are 46" x 4" x 3-1/2". Fits 2-Door Hardtop and Wagons, Sedan, Convertible, and Nomads Driver (Shown)...# $95.00/ea Passenger (Shown)...# $95.00/ea Driver...# $95.00/ea Passenger...# $95.00/ea. Trunk Floor Rear Section This is the rear portion of the trunk, approximately 10" x 54" in size. Fits all models except wagons #318B...$115.00/ea. Trunk Splash Panels Trunk splash panel dimensions for the hardtop and sedan are 45-3/4" x 5-1/2"; Nomad and wagon dimensions are 46-3/8" x 7-1/2" Hardtop, Sedan, Convertible...#318...$104.00/ea Nomad, Wagon, Sedan Delivery..#318C...$108.00/ea. Inner Rocker Panel Braces Driver...# $59.50/ea Passenger...# $59.50/ea. Outer Center Floor Braces These are the end sections of part # Driver... # $71.95/ea Passenger... # $71.95/ea. Short Floor Brace Either side, 2 required # $36.00/ea. Front Floor Pans When the rust has taken over this is the only solution! Sold separately or in pairs. They fit all models, although some may require minor modification. Dimensions are 24" x 19" Driver & Passenger...#237...$112.50/pair Wire Harness Door Sill Covers Fits 2-Door models # $35.00/pair Front Floor at Cowl Braces Driver... # $72.00/ea Passenger... # $72.00/ea. Sale Prices End: Labor Day Weekend Wheels for use with Disc Brakes Accepts full wheel covers and clears disc brakes. Features Chevy and Ford bolt patterns. Hub caps MUST be fitted prior to painting " x 6", Replacement... # $85.00/ea. 22 DANCHUK MANUFACTURING, INC. (800) or

23 the Danchuk Summer Sale Shop Manuals are an absolute MUST! We don t emphasize enough the importance of these manuals, and to be honest, We re not sure that a few short words about them will do them justice. Just ask yourself these questions - if the guy on the assembly line in 1955 didn t attempt his daily job without an assembly manual, what makes us think we should try it as a weekend hobby? Or, if the mechanic in 1958 referred to the Shop Manual on a regular basis for assistance on a 1955, 56 or 57, what makes us think we know more than the professionals? The answer is this, after over 27 years in this business, we have learned that (more times than we would like to admit) it is necessary to refer to all of these manuals for guidance. Don t cheat yourself out of a smooth, frustration free restoration by not purchasing these incredibly important and inexpensive manuals. They will pay for themselves with the time saved and mistakes avoided. Accessory Installation Manuals These are reprints of the Chevrolet originals used by dealers to install the wide variety of accessories available manual includes truck applications owners should refer to the 1955 manual # $9.95/ea # $14.50/ea. Chevrolet Factory Assembly Manuals These bound books are reprints of the manuals used on the assembly line at General Motors. Each manual contains detailed assembly drawings, original part numbers, and more # $19.95/ea # $19.95/ea # $19.95/ea Chevrolet Shop Manual Contains over 500 pages devoted to the 1955 model year. This authorized reprint of a GM manual documents every mechanical operation involved in the care and maintenance of the 1955 Chevy # $22.50/ea Chevrolet Shop Manual Supplement Supplement to the 1955 manual, this book covers only the changes made on 56 models, so both the 55 and 56 manuals are needed for complete information. This is an authorized reprint # $11.75/ea. LIMITED EDITIon Tom The Mongoose MCEWEN 57 Chevy DRAG CAR MODEL The 57 Chevy, driven by the hall of fame drag racer, Tom The Mongoose McEwen is now available as a 1/16 scale numbered limited edition die cast chassis with fiberglass body model. This model is one of the few collectable cars to come with a hand laid fiberglass body and is painted in original Chevrolet Matador red. All...# $129.95/ea Chevrolet Shop Manual Filling over 700 pages with detailed information, this book is a must for 1957 owners. This comprehensive manual covers all engines, transmissions, and body styles for the 1957 model year # $28.95/ea Chevrolet 3-in-1 Manual This Limited Edition unabridged version of all three Shop Manuals is beautifully hard bound to look and last as good in your home llibrary as they are useful while working on your restoration # $33.95/ea. MotoRamic Pen Sets From the hefty lacquer coated brass pen with the bowtie pocket clip, to the gleaming collector-style embossed tin, every feature echoes the era when Chevrolet Tri-Fives reigned supreme. And with a click of the pens top button, the plastic center barrel illuminates to showcase the featured Chevy. Handsomely packaged in a nostalgic gift box, this pen is unlike anything else you ve seen. Also features replaceable ink cartridges and batteries, Motoramic pens live up to your expectation of quality and durability. One pen per set # $18.95/ea # $18.95/ea # $18.95/ea. WORLD S LARGEST MANUFACTURER OF CHEVROLET RESTORATION PARTS 23