OWNER S MANUAL. Sears Halley 7pc dining set. * Rectangular Dining Table. Product Code: D71 M18428 UPC Code: Date of Purchase: / /

Transcription

1 OWNER S MANUAL Sears Halley 7pc dining set * Rectangular Dining Table Product Code: D71 M18428 UPC Code: Date of Purchase: / / If you have any problems with this product, DO NOT RETURN TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT am-5pm (EST), Monday-Thursday 8am-4pm (EST), Friday. View the expanded assortment of outdoor living product on-line at and La-Z-Boy is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc La-Z-Boy Incorporated. Page 1 of 6

2 WARRANTY In order to activate your warranty please register at There you can review our full warranty details and other helpful information. Or, you may call us at , 8am - 5pm (EST), Monday Thursday, 8am 4pm(EST), Friday. Care and Maintenance Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty. Lack of original receipt will void warranty! CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts, nuts and nut covers are securely tightened. PARTS LIST PART# DESCRIPTION PICTURE Q TY A Table Rim 1 B1 Table Leg 3 B2 Table Leg with AC cord mounting clips 1 C Connector Ring 1 D1 M6x20mm Hex Head Bolt 16 D2 M6x35mm Hex Head Bolt 4 E M6 Washer 20 Page 2 of 6

3 F Bolt Cap 20 G Hex Wrench 2 H Battery Box 1 I AC Charger 1 J Ceramic Tile 10 K Glass Top 1 Assembly Steps: Step1: Part# A x 1 Part# B1 x 3 Part# B2 x 1 Part# D1 x 8 Part# D2 x 4 Part# E x 12 Part# F x 12 Repeat procedure for three remaining table legs. NOTE: DO NOT tighten the bolts completely at this step. Page 3 of 6

4 Step 2: Part# C x 1 Part# D1 x 8 Part# E x 8 Part# F x 8 Repeat procedure for three remaining table legs. NOTE: Once all the bolts are in place, tighten completely. Step 3: Part# H x 1 Light Strip NOTE: Please plug in the preinstalled light strip into the battery box once it is placed in the table bracket Page 4 of 6

5 Step 4: Part# J x 10 Repeat procedure for remaining tiles (J) around border of table. Step 5: Part# K x 1 Now the table is ready for your enjoyment! Tip: Use the adjustable feet as shown in the expanded view to level your table. Page 5 of 6

6 Lighted table operating instructions 1. Turn the dimmer on the battery box clockwise to brighten table lights. To prevent any damage on the battery, cover the light strip & AC charger inputs with the plastic plug. Dimmer Light Strip AC Charger 2. When the battery box is power off, remove the battery box from the bracket to recharge. Or turn off the light then plug the AC charger (I) in directly to recharge. The indicator light on the battery box will turn to green once the battery is fully charged. Or you can plug the AC charger (I) in directly to use. AC Cord Clips WARNING: 1. Do not crawl, stand, or sit on table tops. 2. Do not set or lay heavy items on table tops. 3. Avoid extreme hot & cold items being placed on table tops. 4. This glass top is produced with tempered glass which is designed to safely shatter in small pieces when impacted or stressed beyond strength limitations. Page 6 of 6

7 OWNER S MANUAL Sears Halley 7pc Dining Set * Swivel Rocker Product Code: D71 M18428 UPC Code: Date of Purchase: / / If you have any problems with this product, DO NOT RETURN TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT am-5pm (EST), Monday-Thursday 8am-4pm (EST), Friday. View the expanded assortment of outdoor living product on-line at and La-Z-Boy is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc La-Z-Boy Incorporated. Page 1 of 4

8 WARRANTY In order to activate your warranty please register at There you can review our full warranty details and other helpful information. Or, you may call us at , 8am - 5pm (EST), Monday Thursday, 8am 4pm(EST), Friday. Care and Maintenance Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the warranty. Lack of original receipt will void warranty! CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts, nuts and nut covers are securely tightened. PARTS LIST PART# DESCRIPTION PICTURE Q TY A Seat Frame and Back with arms 1 B T-Rocker 1 C Base 1 D M8x40mm Hex Head Bolt 4 E M8 Washer 4 F M8 Nut 4 Page 2 of 4

9 G M8 Bolt Cap 4 H Hex Wrench 2 I Seat Cushion 1 J Back Cushion 1 Assembly Steps: Step1: Part# A x 1 Part# B x 1 Part# D x 4 Part# E x 4 Part# F x 4 Part# G x 4 NOTE: Once all the bolts are in place tighten completely. Page 3 of 4

10 Step2: Part# C x 1 Step3: Part# I x 1 Part# J x 1 Now the swivel rocker is ready for your enjoyment. Page 4 of 4