SPEEDWAY HIGH PERFORMANCE TORCHES
|
|
- Aubrie Harper
- 5 years ago
- Views:
Transcription
1 SW amp WATER COOLED TORCHES The Speedway rated at 320amps- uses the same parts as a WT20 and can eliminate the need for changing to a larger torch. Dual back cap seal provides positive gas seal and protection against "HF" current leakage. The Speed Bump handle can rotate 360 degrees to obtain the optimum position for allowing long work cycles without tiring. Torch packages include: Flexible Rubber Overbraided Cables and Hoses, a super flexible soft leather zipper cover, and a starter kit with back caps, a 2.4mm collet and collet body, 2.4mm tungsten electrode and a gas cup. SW320-12DX SW320-25DX 320amp Speedway Torch Package with 12.5ft (3.8m) cables and hoses. 320amp Speedway Torch Package with 25ft (7.6m) cables and hoses. The increased water cooling and greater current carrying capacity allow a tungsten range up to 5/32" (4.0mm). (41V medium back cap required.) The whole range of WT20 parts can be used:- Standard collets, collet bodies and gas cups. Standard gas lenses and gas lens cups. Medium gas lenses and medium gas lens cups. Large diameter gas lenses with large diameter gas lens collets and large diameter gas lens cups. These items are all available individually or a convenient accessory kit is available. There is a range of Quartz Nozzles and MegaFlo Nozzles to suit. The Super Size Champagne 2 Nozzle Kit can also be used on the SW320. 3
2 SW amp WATER COOLED TORCH PACKAGES SW amp WATER COOLED TORCH PACKAGES SW320-12DX 320amp Speedway Torch Package 12.5ft Each SW320-12DX /SW 320amp Speedway Torch Package 12.5ft / Switched Each SW320-25DX 320amp Speedway Torch Package 25ft Each SW320-25DX /SW 320amp Speedway Torch Package 25ft / Switched Each PLEASE NOTE: - TORCHES are fitted with FLEXIBLE RUBBER OVER BRAIDED CABLES, a SUPER FLEXIBLE LEATHER ZIPPER COVER and are complete with a 2.4mm STARTER KIT. SWITCHED TORCHES have a Plain Handle, Joy Stick Switch and rubber Switch Boot as standard. ACCESSORY KIT WT9/20-AK Accessory Kit Each REPLACEMENT TORCH BODIES, HANDLES and SWITCHES SW amp Torch Body with Insulator Each H150SW Speed Bump Handle Each H150 Optional Plain Handle - push on Each SS-1J Joy Stick Momentary Contact Switch Each SS-1J/4 Joy Stick Switch Complete with 4m Switch Lead Each SS-1J/8 Joy Stick Switch complete with 8m Switch Lead Each BM-1 Switch Retaining Boot - Medium Each 4
3 SW amp WATER COOLED TORCH PACKAGES REPLACEMENT BACK CAPS and O RINGS 41V24 Long Back Cap with 'O' Ring Each 41V33 Short Back Cap with 'O' Ring Each 41V35 Medium Back Cap with 'O' Ring Each 41V Medium Back Cap (for 5/32" Collet) Each 98W77 Replacement Back Cap O Ring PK 10 98W320 Replacement 'O' Ring for Rear Insert PK 10 REPLACEMENT POWER CABLES, WATER and GAS HOSES - (3/8" BSP) 45V03HRS Heavy Duty Power Cable 12.5ft - Rubber OverBraided Each 45V07HRS Heavy Duty Water In Hose 12.5ft - Rubber OverBraided Each 45V09RS Gas Hose 12.5ft - Rubber OverBraided Each 45V04HRS Heavy Duty Power Cable 25ft - Rubber OverBraided Each 45V08HRS Heavy Duty Water In Hose 25ft - Rubber OverBraided Each 45V10RS Gas Hose 25ft - Rubber OverBraided Each ZIPPER COVERS LC Super Flexible Leather Zipper Cover 11ft Each LC Super Flexible Leather Zipper Cover 24ft Each COLLETS, COLLET BODIES, GAS LENSES and GAS CUPS SW320 - STANDARD USE 13N " Standard Collet PK 5 13N22 1/16" Standard Collet PK 5 13N23 3/32" Standard Collet PK 5 13N24 1/8" Standard Collet PK 5 13NC532 5/32 Heavy Duty Collet(Requires 41V Back Cap) Each 13N " Standard Collet Body PK 5 13N27 1/16" Standard Collet Body PK 5 13N28 3/32" Standard Collet Body PK 5 13N29 1/8" Standard Collet Body PK 5 13NCB532 5/32 Heavy Duty Collet Body (Requires 41V35-532) PK 5 13N08 1/4 Bore x 1.5/32 Gas Cup PK 10 13N09 5/16 Bore x 1.5/32" Gas Cup PK 10 13N10 3/8 Bore x 1.5/32 Gas Cup PK 10 13N11 7/16 Bore x 1.5/32 Gas Cup PK 10 13N12 1/2 Bore x 1.5/32 Gas Cup PK 10 13N13 5/8 Bore x 1.5/32 Gas Cup PK F70 3/16 Bore x 1.7/8 Long Gas Cup PK F71 1/4 Bore x 1.7/8 Long Gas Cup PK F72 5/16 Bore x 1.7/8 Long Gas Cup PK F73 3/8 Bore x 1.7/8 Long Gas Cup PK F74 3/16 Bore x 2.1/2 Extra Long Gas Cup PK F75 1/4 Bore x 2.1/2 Extra Long Gas Cup PK F76 5/16 Bore x 2.1/2 Extra Long Gas Cup PK F77 3/8 Bore x 2.1/2 Extra Long Gas Cup PK 10 SW320 - STANDARD GAS LENS OPERATION (Use Standard Collets) 45V Standard Gas Lens Each 45V43 1/16 Standard Gas Lens Each 45V44 3/32 Standard Gas Lens Each 45V45 1/8 Standard Gas Lens Each 5
4 SW amp WATER COOLED TORCH PACKAGES COLLETS, COLLET BODIES, GAS LENSES and GAS CUPS - SW320 - STANDARD GAS LENS OPERATION (Use Standard Collets) - 53N58 1/4 Bore x 1 Standard Gas Lens Cup PK 10 53N59 5/16 Bore x 1 Standard Gas Lens Cup PK 10 53N60 3/8 Bore x 1 Standard Gas Lens Cup PK 10 53N61 7/16 Bore x 1 Standard Gas Lens Cup PK 10 53N61S 1/2 Bore x 1 Standard Gas Lens Cup PK 10 SW320 - MEDIUM GAS LENS OPERATION (Use Standard Collets and Gas Lens Insulator) 45V35SW 1/16 Medium Gas Lens Each 45V36SW 3/32 Medium Gas Lens Each 45V37SW 1/8 Medium Gas Lens Each 45V38SW 5/32 Medium Gas Lens Each 54N12SW 5/8 Bore x 1.5/16 Medium Gas Lens Cup PK 10 54N14SW 1/2 Bore x 1.5/16 Medium Gas Lens Cup PK 10 54N15SW 7/16 Bore x 1.5/16 Medium Gas Lens Cup PK 10 54N16SW 3/8 Bore x 1.5/16 Medium Gas Lens Cup PK 10 SW320 - LARGE DIAMETER GAS LENS OPERATION (Use 54N63-20 Gas Lens Insulator) 13N21L 0.040" Large Diameter Gas Lens Collet PK 5 13N22L 1/16" Large Diameter Gas Lens Collet PK 5 13N23L 3/32" Large Diameter Gas Lens Collet PK 5 13N24L 1/8 Large Diameter Gas Lens Collet PK 5 45V0204S Large Diameter Gas Lens Each 45V116S 1/16 Large Diameter Gas Lens Each 45V64S 3/32 Large Diameter Gas Lens Each S 1/8 Large Diameter Gas Lens Each 57N75 3/8 Bore x 1.7/8" Large Diameter Gas Lens Cup PK 10 57N74 1/2 Bore x 1.7/8" Large Diameter Gas Lens Cup PK 10 53N88 5/8 Bore x 1.7/8" Large Diameter Gas Lens Cup PK 10 53N87 3/4 Bore x 1.7/8" Large Diameter Gas Lens Cup PK 10 53N89 15/16 Bore x 1.5/16" Large Diameter Gas Lens Cup PK 10 INSULATORS AND CUP GASKETS 54N63-20 Large Diameter Gas Lens Insulator Each Medium Gas Lens Insulator Each Standard and Gas Lens Insulator Each 6
5 SPEEDWAY HIGH PERFORMANCE TORCHES SW amp WATER COOLED TORCH PACKAGES - optional parts WELDTEC CLEAR QUARTZ TIG NOZZLES Now you can use these Quartz Nozzles on most Tig Torches using a simple Adaptor Ring or a special Gas Lens. These modern fused Quartz Nozzles offer superior temperature and thermal shock resistance, surpassing both Pyrex and the pink Ceramic Nozzles for performance. * Better weld puddle visibility. * Higher Heat resistance. * No thermal shock breakage. * Better Laminar gas coverage. Available in different bore sizes and lengths to suit your job requirements Standard and Gas Lens Insulator Each 13NQA-2 Adaptor Ring (with 'O' rings) Each 13NQ-5 5/16" Bore x 1" Quartz Nozzle Each 13NQ-7 7/16" Bore x 1" Quartz Nozzle Each 13NQ-9 9/16" Bore x 1" Quartz Nozzle Each 13NQ-5L 5/16" Bore x 1.3/4" Long Quartz Nozzle Each 10NQ-7L 7/16" Bore x 1.3/4" Long Quartz Nozzle Each 10NQ-9L 9/16" Bore x 1.3/4" Long Quartz Nozzle Each 13N " Standard Collet PK 5 13N22 1/16" Standard Collet PK 5 13N23 3/32" Standard Collet PK 5 13N24 1/8" Standard Collet PK 5 13N " Standard Collet Body PK 5 13N27 1/16" Standard Collet Body PK 5 13N28 3/32" Standard Collet Body PK 5 13N29 1/8" Standard Collet Body PK 5 45V43NQ 1/16" Gas Lens (with 'O' ring) Each 45V44NQ 3/32" Gas Lens (with 'O' ring) Each 45V45NQ 1/8" Gas Lens (with 'O' ring) Each 7
6 SW amp WATER COOLED TORCH PACKAGES - optional parts WELDTEC MEGAFLO TIG TORCH GLASS NOZZLES Made of special toughened glass, the MegaFlo Nozzle provides complete weld zone protection for critical welding of reactive metals such as titanium, molybdenum, nickel alloys, stainless alloys and others. They are useable on most hand held and machine Tig Torches. MEGAFLO KITS - for use on WT9, WT20, WT25, SW320, WT22, WT23 and 920 i-heads. Comprises: - Glass Nozzle, MegaFlo Body Assembly, Gasket and Collet. MF13-16 MegaFlo Nozzle Kit 1/16" Each MF13-32 MegaFlo Nozzle Kit 3/32" Each MF13-18 MegaFlo Nozzle Kit 1/8" Each REPLACEMENT PARTS - for use on WT9, WT20, WT25, SW320, WT22, WT23 and 920 i-heads. MF1013N Glass Nozzle - 1.3/32" Bore x 1.1/8" Long Each MF13G Gasket Each MB13-16 MegaFlo Body Assembly 1/16" Each MB13-32 MegaFlo Body Assembly 3/32" Each MB13-18 MegaFlo Body Assembly 1/8" Each 13N22 1/16" Standard Collet PK 5 13N23 3/32" Standard Collet PK 5 13N24 1/8" Standard Collet PK 5 8
7 SW amp WATER COOLED TORCH PACKAGES - optional parts SUPER SIZE CHAMPAGNE 2 NOZZLES The WeldTec Super Size Champagne 2 Nozzle was conceived and developed for all demanding weld zone flooding applications. The 1" internal diameter ceramic nozzle can be used for exotic metals such as titanium, monel, inconel, hastelloy, waspalloy and other high temperature metals. It can also be used for stainless steels, or any other metal requiring a complete protective umbrella of shielding gas, giving superior weld quality and reduced oxidation and discolouration. Champagne 2 Nozzle mounted on Speedway SW320 high performance Tig torch. The Champagne 2 Nozzle is made from a high heat resistive non-conductive ceramic. The screen filter assembly uses a stainless steel electrode guide to centre the electrode, bundle and protect the fine filter screens from overheating, providing the ability for greater electrode stick-out and a long life. It fits all WT9, WT20 and WT25 type torch models, the Speedway SW320 torch, 920 i-heads and machine torch models WT22 and WT23. No special parts or conversion kits are required - it fits directly on the standard gas lens used with these torch models. Champagne 2 Nozzles are available for 1/16"( 1.6mm), 3/32"(2.4mm) and 1/8"(3.2mm) diameter electrodes. They can be ordered either as individual nozzle assemblies or in convenient kits, which include the nozzle assembly, gas lens, collet and insulating gasket. 9
8 SW amp WATER COOLED TORCH PACKAGES - optional parts SUPER SIZE CHAMPAGNE 2 NOZZLES CHAMPAGNE 2 NOZZLE DIMENSIONS CHAMPAGNE 2 NOZZLE KITS for SPEEDWAY SW320 53CNK2-16 1/16" Champagne 2 Nozzle Kit Each 53CNK2-32 3/32" Champagne 2 Nozzle Kit Each 53CNK2-18 1/8" Champagne 2 Nozzle Kit Each REPLACEMENT CHAMPAGNE 2 NOZZLES 53N6CN2-16 1/16" Champagne 2 Nozzle complete with Screens Each 53N6CN2-32 3/32" Champagne 2 Nozzle complete with Screens Each 53N6CN2-18 1/8" Champagne 2 Nozzle complete with Screens Each REPLACEMENT GAS LENS, COLLETS and INSULATING GASKET 45V43 1/16 Standard Gas Lens Each 45V44 3/32 Standard Gas Lens Each 45V45 1/8 Standard Gas Lens Each 13N22 1/16" Standard Collet PK 5 13N23 3/32" Standard Collet PK 5 13N24 1/8" Standard Collet PK Standard and Gas Lens Insulator Each 10
9 SW amp WATER COOLED TORCH PACKAGES - optional parts 180 DEGREE DINSE ADAPTORS 180degree Adaptors feature adjustable locking Water/Gas Return Hose position. When locked in position, the exit port is safely at the top of the connector, minimising accidental damage. Adaptor Body and Gas/Water Port are fully insulated. Two sizes are available:- Small with 9mm dia.dinse fitting and Large with 13mm dia.dinse fitting. Both are supplied with 0.5m reinforced rubber Water/Gas Return Hose. Adaptors have a 3/8 BSP (3/8) Water/Gas Return Hose fitting as Standard, 1/4"BSP (1/4), Bayonet (BY) and other fittings are available on request Dinse Adaptor 180deg - to fit 3/8"BSP female cable nut Each Dinse Adaptor 180deg - to fit 3/8"BSP female cable nut Each 11
10 SW amp WATER COOLED TORCH PACKAGES GAS CUP SELECTION STANDARD GAS CUPS LONG GAS CUPS EXTRA LONG GAS CUPS 12
11 SW amp WATER COOLED TORCH PACKAGES GAS CUP SELECTION STANDARD GAS LENS CUPS MEDIUM GAS LENS CUPS LARGE DIAMETER GAS LENS CUPS 13
TXH 121, TXH 151, TXH 201, TXH 251, TXH 401. Spare parts list. Edition S /E /P24 ESAB AB 2013
TXH 121, TXH 151, TXH 201, TXH 251, TXH 401 Spare parts list Edition 20130204 Rights reserved to alter specifications without notice. 0459 839 087-1 - TXH 121, TXH 151, TXH 201, TXH 251, TXH 401 F= flexible
More informationCeramic Cups. Gas Lens Cups. UK Sales Export Sales Misc Tig
204 MK11A / TW450 / Interlas Consumables Ceramic Cups A 889705 Standard Al Cup 6mm/1/4" 11mm/7/16" 68mm/2 5/8" MK11A 889706 Standard Al Cup 10mm/ 16mm/5/8" 68mm/2 5/8" MK11A 889707 Standard Al Cup 6mm/1/4"
More informationWeldcraft Modular Series
Weldcraft Modular Series Issued Jan. 015 Index No. AY/36.0 Hand-Held TIG Welding Torches Quick Specs Models Type Rated Output* Duty Cycle Electrode Range* A-150 Modular / A-150 Modular Valve Air-Cooled
More informationWeldcraft Modular Series
Weldcraft Modular Series Issued Aug. 016 Index No. AY/36.0 Hand-Held TIG Welding Torches Quick Specs Models Type Rated Output* Duty Cycle Electrode Range* A-150 Modular / A-150 Modular Valve Air-cooled
More informationLight, Compact... and Portable
INERTER Light, Compact... and Portable Year * Dragster 85 comes with: Power cord & plug 2 x dinse 25mm plugs Carrying strap Best package systems Order Information Part No: 0-3077 Description: Dragster
More informationWelding. Product Catalogue. Total Welding & Cutting Solutions ISO 9001 ISO OHSAS PREMIUM QUALITY
Welding Product Catalogue LAUNCH PROMOTION Total Welding & Cutting Solutions ISO 9001 ISO 14001 OHSAS 18001 PREMIUM QUALITY Quality & Standard ISO 9001 ISO 14001 OHSAS 18001 Developed according to international
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
More informationPLASMA. Product Catalogue 2.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS
More informationPro-Grip Max TIG Features & Benefits
36 Pro-Grip MX Tig Torch Packages Pro-Grip Max TIG Features & Benefits Torch Heads Lightweight and Durable Manufactured with high temperature resistant silicone rubber insulation. ll copper components
More informationTECHNOLOGY FOR THE WELDER S WORLD. TIG CATALOG 4.1. TIG Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. TIG CATALOG 4.1 TIG Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Content 3 TIG Welding Torches ABITIG GRIP air and liquid cooled
More informationTIG. Product Catalogue 1.0 / V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. TIG Product Catalogue 1.0 / V1 www.binzel-abicor.com Content TIG-Welding Torches TIG-Welding Torches ABITIG air- and liquid-cooled Page 04 05 ABITIG
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections. Torches and cable assemblies can be produced in excess lengths. Please find the different options
More informationIssued Nov Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate 3
Issued Nov. 2013 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationT e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1.
T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG Product Catalogue 3.1 / V1 www.binzel-abicor.com Content TIG Welding Torches TIg Welding Torches ABITIg grip air and liquid cooled Page 04
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS
More informationSeries. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate Coolant
Series Issued April 2013 Index No. AY/7.2 Coolmate Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections with Tuchel-plug. Torches and cable assemblies can be produced in excess lengths. Please find
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1. Plasma Cutting and Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1 Plasma Cutting and Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches
More informationMaxstar TIG/Stick Welding
200 Series Issued Jan. 2010 Index No. DC/32.0 Maxstar TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard
More informationIssued April 2018 Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma cutting Resistance welding
Issued April 2018 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationProcesses TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Air Carbon Arc (CAC-A) 5/32-inch maximum
Maxstar 200 Series Issued June 2013 Index No. DC/32.0 TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side separate connections. Torches and cable assemblies can be produced in excess lengths. Please find the different options
More informationSPIRAL WOUND GASKETS
SPIRAL WOUND GASKETS www.flexitallic.eu A member of the FLEXITALLIC SPIRAL WOUND GASKETS Contents Page Worldwide Customer Service Network 2 Introduction 3 Gasket Identification 4 Available Gasket Materials
More informationPROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel
More informationTough, Compact... and Portable
INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored
More informationPLASMA. Product Catalogue 1.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS
More informationProcesses AC/DC TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Dynasty 210. Meter calibration allows digital meters to be calibrated for certification.
Dynasty 210 Series Issued Dec. 2016 Index No. AD/4.81 TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision fabrication Heavy fabrication Pipe and tube fabrication Aerospace Aluminum
More informationArticle on Sheath materials, Thermowells, Fittings, and Terminations
Article on Sheath materials, Thermowells, Fittings, and Terminations 1. INTRODUCTION Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG
More informationSection B. P/N: OEM Extended Life Source (no vaporizer) for GSD Implanters
Section B P/N: 99420 OEM 1068990 Extended Life Source (no vaporizer) for GSD Implanters B 2-3 B-4 B-6 B-5 Key to Sections B-2 Exploded view, with part numbers, of arc chamber and related components. B-3
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationTIG welding torches TTG / TTW
TIG welding torches TTG / TTW The whole wide world of TIG welding torches GENERAL REMARKS Individualised systems for every application Fronius offers system solutions. Long-lived and highly cost-effective
More informationPART NUMBERS DESCRIPTION MIN QTY PX TIP 1.0 MM (4) 4 PX AIR DIFFUSER INSULATOR (5) 10 PX ELECTRODE ZR 14.
BINZEL PSB0 PX-000 TIP.0 MM () 0 PX-00 AIR DIFFUSER INSULATOR () 0 PX-00 ELECTRODE ZR MM () 0 PX-00 ELECTRODE ZR. MM () 0 PX-00 INSULATOR SLEEVE () 0 PX-00 SPRING () 0 PX-00 TIP. MM () 0 PX-00 INSULATOR
More informationElcon Gaz (Pty) Ltd - Welding & Cutting - November 2018
Elcon Gaz (Pty) Ltd - Welding & Cutting - November 2018 Matthew Hunt - 072 888 5882 / elcongaz.matthew@gmail.com 439 South Coast Road, Rossburgh - 031 465 1084 *SPECIALS* *PRICING SUBJECT TO CHANGE WITHOUT
More informationTIP TIG HOTWIRE 18 SUPER COOL TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% INTERNAL PARTS
TIP TIG HOTWIRE 18 SUPER COOL TORCH Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% COMPLETE TORCH ASSEMBLY 10002461 TIP TIG 18 SC HW TORCH WITH ORANGE LINER (14FT) $995.00 ea. 10002465 TIP
More informationINSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationFLEXWOUND METALLIC AND SEMI METALLIC GASKETS
FLEXWOUND METALLIC AND SEMI METALLIC GASKETS PRODUCT DESCRIPTION FMI metallic gaskets are specifically designed to withstand extreme temperatures and pressures, combined with chemical exposure. Available
More informationSyncrowave TIG/Stick Welding
DX Issued June Index No. AD/. Syncrowave TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision Metal Fabrication Maintenance and Repair Light and Heavy Manufacturing Aerospace Shipbuilding
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationPHANTOM PORT BALL. Design
BALL Innovative Ball Design for Severe Services Design Pressure Rating 150# to 1500# Sizes 1/2 to 12 1700# to 2500# Sizes 1/2 to 6 3300# to 4500# Sizes ½ to 6 Ball Size 1/2 to 12 Full Port ¾ to 14 Reduced
More informationSAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR
SAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR Superior Choice for Critical Welds SAE-500 Severe Duty is the preferred choice for its great arc performance, design simplicity, reliability and ruggedness!
More informationDIN EN ISO 9001:2008
Management system as per DIN EN ISO 9001:2008 Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT procedures for Holch Schweißbrenner
More informationMaxstar TIG/Stick Welding
00 Series Issued March 00 Index No. DC/ Maxstar TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Petro/Chem Fabrication Aerospace Food/Beverage Industry Mechanical Contractors Pressure
More informationMaximise Your Product Sales!
Merchandising Catalogue Maximise Your Product Sales! Updated 09.02.2018 Helping our Distributors be more successful Take a stand with Weldclass... and watch your sales grow! Page 2 of 13 Helping our Distributors
More informationGouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts.
Arc Welding Equipment Gouging Electrodes Gouging Electrodes Excellent arc stability. Superior metal removal rate. Cool operation. Uniform diameter. Clean machine-like grooves and cuts. DC Jetrod Copperclad
More informationRepeatable welds again, and again, and again
INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma
More informationKovinska tesnila KLINGER
procesna oprema Spiral Wound Gaskets Kovinska tesnila KLINGER Metallic Maxiprofile METALLIC GASKETS Maxiflex Introduction to Maxiflex... 42 Maxiflex Styles... 44 Graphite Filled... 46 PTFE Filled... 47
More informationSTUD BOLTS. Konnect has a dedicated stud bolt facility and can. We carry bar stock and nut stock in the following material grades:
SCREWS 204 STUD BOLTS Konnect has a dedicated stud bolt facility and can Coventry Konnect dedicated Fasteners stud dedicated bolts stud facility bolts located facility in located Redcliffe, in Redcliffe,
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationEquipment Specification ARC528E-ICC Arc Spray System
Equipment Specification ARC528E-ICC Arc Spray System TYPICAL SYSTEM CONFIGURATIONS Pictured below is a range of typical system configurations. Variations of these configurations may be possible. Contact
More informationTWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600
TWIN WIRE ARC SPRAY SYSTEM, MODEL: ARCJET -99/600 EQUIPMENT DESCRIPTION : The Arc Spray Unit; Model : 99/600 combines typical features of the arc spray technology such as reliability and robustness with
More informationDIN EN ISO 9001:2008
Management system as per DIN EN ISO 9001:2008 Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT procedures for Holch Schweißbrenner
More informationPlastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19
Plastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19 A wide variety of thermocouples commonly used in the plastics industry, suitable for high and low temperatures applications. Available in a choice
More informationY O U R G L O B A L G A S K E T P R O V I D E R
Revised 02-12-13 CONTENTS MANUFACTU UNITS 2 INTRODUCTION 3 GASKET IDENTIFICATION 4 AVAILABLE GASKET MATERIALS 5 GASKET SELECTION 6 DIMENSIONAL DATA 7 1 - STYLE CG & CGI TO ASME B16.20 TO SUIT ASME B16.5
More informationAveraging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
More information9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationBULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationOPERATION INSTRUCTIONS
www.r-techwelding.co.uk Email: sales@r-techwelding.co.uk Tel: 01452 733933 Fax: 01452 733939 ProArc 175 INVERTER ARC WELDER OPERATION INSTRUCTIONS Version 2017-10 2 3 Thank you for selecting the R-Tech
More informationImproves Safety, Productivity & Profitability.
Improves Safety, Productivity & Profitability. TM GAME-CHANGING TECHNOLOGIES CAN STOP YOU FROM WASTING HOURS EVERY DAY. ArcReach welding technology minimises the non-valueadded time spent walking to and
More informationTop Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight
FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional
More informationCATALOGUE. Valid from 15 June Weldwide Solutions Limited Product Catalogue
CATALOGUE Valid from 15 June 2011 1 CONTENTS Weld Purging Products 3 Weld Gas Analysers 3 Weld Gas Analyser spares and maintenance 4 Inflatable Purge Systems 5 Ring Purge 6 Multi-size Ring Purge 6 Rigid
More informationWIG AUTOMATION 03. Torch heads TIG Torch brackets Shock sensors Torch sets TIG separable versions
WIG AUTOMATION 0 Torch heads TIG Torch brackets Shock sensors Torch sets TIG separable versions CONTENTS TIG system definition for conventional robots 2 Torch heads 24 DIX TAZ 400 24 DIX TETZ 400 28 DIX
More informationProcesses MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)
XMT 350 Series Issued August 2010 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationMake Flexitallic Your Global Provider
Make Flexitallic Your Global Provider We re a worldwide organization specializing in local service and meeting each customer s needs. Visit us at Flexitallic.com to browse our comprehensive product range,
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More informationProcesses MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)
XMT 350/450 Series Issued July 2012 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication
More informationCHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
More informationItem 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"
Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature
More informationFORGED STEEL VALVES CATALOG. Our Reputation Has Been Forged Over A Solid Half Century
FORGED STEEL S CATALOG Our Reputation Has Been Forged Over A Solid Half Century In the Beginning 1956 When he founded his company in the mid 1950s, James Dewolf Smith focused on the production of forged
More informationPump Parts and Fittings
12volt NorthStar Pumps The NorthStar NSQ Series 12V On-Demand Diaphragm Pump is a premium-quality on-demand diaphragm pump that upgrades your sprayer with innovative components and engineering for superior
More informationModel BPS-09-Npt. Stainless Steel Back Pressure Bypass Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-09-Npt Stainless Steel Back Pressure Bypass Valve
More informationCONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 RB SERIES CONTROL CHOKE Unique. Precise. Quality. Reliable. RB SERIES CONTROL VALVES FEATURES Benefits The RB Series Control Valve features several unique design characteristics that minimize wear
More informationIntelligent Welding and Air Solutions for the Automotive Professional
+353 1 419 1611 www.techntools.ie Unit A1 Knockmitten, Western Industrial Estate, Dublin 12, Ireland Intelligent Welding and Air Solutions for the Automotive Professional www.techntools.ie MIG 160 Package
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationVIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features
VIPER 182 - MIG-MMA Welder Package 30-180 Amps #KUMJRVW182 Package Deal Ex GST Inc GST $530.00 $583.00 Package Contents - SAVE $51.50 (Inc) 1 x W244 - VIPER 182 Multi-Function Inverter Welder-MIG-MMA $519.00
More informationFlexwound metallic and semi metallic gaskets
Flexwound metallic and semi metallic gaskets FMI is an Italian manufacturing company specialised in the processing of PTFE, graphite and all the main asbestosfree materials used for the production of gasketing
More informationGasket Reference Guide
Gasket Reference Guide Quick Gasket Reference...1 Spiral Wound Gasket Identification Ring Color Coding...7 Non-metallic Filler Materials...9 Metallic Winding Materials...9 Flange Face Designs...11 Gasket
More informationInverter Series. Lightweight & Portable FOR ONSITE & FIELD MAINTENANCE
Inverter Series Lightweight & Portable FOR ONSITE & FIELD MAINTENANCE WIA s Inverter Series Weldmatic 200i, Weldarc 180i & Weldarc 140i The Weldmatic 200i, Weldarc 180i and Weldarc 140i are lightweight
More informationA fresh approach. SPOOL ON mig SERIES DurAgrip SPOOL ON mig Torch Range MIG/TIG/PLASMA. Innovation, technology, PERFORMANCE
Innovation, technology, PERFORMANCE MIG/TIG/PLASMA Welding & tting Torch Technology A fresh approach SPOOL ON mig SERIES DurAgrip SPOOL ON mig Torch Range All products conform to EN60974-7,, and are RoHS,
More informationTECHNICAL SPECIFICATIONS
Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the
More informationGASKET REFERENCE GUIDE. Engineering Support Available at Flexitallic.com/chat
GASKET REFERENCE GUIDE Engineering Support Available at Flexitallic.com/chat Quick Gasket Reference...1 Spiral Wound Gasket Identification Ring Color Coding...6 Non-metallic Filler Materials...7 Metallic
More informationSlurry Transport: Metal-Seated Isolation Ball Valves UPGRADE YOUR EXPECTATIONS. Valves. v060514
Slurry Transport: Metal-Seated Isolation Ball Valves UPGRADE YOUR EXPECTATIONS v060514 Valves Table of contents Why COOPER Accuseal Why make COOPER Accuseal your severe service metal-seated ball valve
More informationPWA ANSI / ASME B73.1 PROCESS PUMP
PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationEnhanced low-end performance for stainless steel and thin-metal applications.
XMT 400 CC/CV Issued January 2004 Index No. DCX/18.92 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck and Trailer Manufacturing Fabrication
More informationA Resource for Semiconductor Manufacturers Illustrated Parts Guide for Axcelis GSD 200E² 160V
Illustrated Parts Guide for Axcelis GSD 00E² 0V GSD Water Cooled & Non-Water Cooled Bushing and Liner Flange Upgrades Pgs. - Source Body Components Non-Vaporizer / Vaporizer Pgs. -0 Extraction Electrode
More informationPT-17A/PT-17AM STYLE TORCH HEAD COMPONENTS USED WITH CONSOLES PCM-150 (875/1125 W/ADAPTER)
Century & Esab 20-20 STYLE TORCH HEAD COMPONENTS 20-40 STYLE TORCH HEAD COMPONENTS NO. CENTURY /SOLAR DESCRIPTION 1. PX 4405 4405 44050 O-ring 2. PX 4422 4422 44220 Swirl ring 3. PX 4420 4420 44200 Electrode
More informationHSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
More informationWELD THE WORLD Product Range 11_2015 English
WELD THE WORLD Product Range 11_2015 English Weco has been producing and selling for 15 years welding machines. All our welding machines are 100 % in Europe (North of Italy) produced. A wide range of welding
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More information88 Plasma Cutting Cuts Steel, stainless steel, aluminium, cast iron, copper brass, titanium, magnesium alloys Typical Usage Metal fabrication, construction, weld repair, automotive repair, automotive racing,
More informationMSC. THERMAL SPRAY FACILITIES AUTOMATIC SYSTEMS for HVOF, PLASMA, FLAME SPRAY, ARC SPRAY & ROD SPRAY TOTHERMALSPRAY COATINGSTECHNOLOGY
MSC THERMAL SPRAY FACILITIES AUTOMATIC SYSTEMS for HVOF, PLASMA, FLAME SPRAY, ARC SPRAY & ROD SPRAY TOTHERMALSPRAY COATINGSTECHNOLOGY ARCJET - 95/400 TWIN WIRE ARC SPRAY SYSTEM The MEC Arc Spray System
More informationINSTALLATION INSTRUCTIONS For Model 855 Wolo Express TM
INSTALLATION INSTRUCTIONS For Model 855 Wolo Express TM 12-Volt Train Horn Your purchase of a WOLO EXPRESS TRAIN HORN is the choice that will complement your vehicle. Wolo s products are manufactured with
More informationOWNER S MANUAL MODEL: PT 450 / PT 450M WELDING POSITIONER
OWNER S MANUAL RD-8450E Important Read these instructions before installing, operating or servicing this product. MODEL: PT 450 / PT 450M WELDING POSITIONER Serial number 1506003 ~ and later Revised date
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More information