MAR K PAGE BED KITS CONTENTS

Transcription

1

2 PAGE BED KITS CONTENTS At MAR-K we build our parts for owners and builders who recognize the importance of buying parts that are precision made for accurate fit and long term durability. Our customers understand that a poor quality part ends up being more expensive than one which is made right, especially when costs of installation, modification for proper fit and appearance of the finished job are considered. MAR-K customers also want parts that are made in the United States of America by Americans. Front Cover: Top right nd Chevy Short Stepside, Robert Wynd, Mehoopany, PA Bottom Chevy Short Fleetside, Matt Hyatt, Burlington, WA 3 Why Choose MAR-K - Bed Parts Chevy/C Stepside Chevy/C Stepside Chevy/C Fleetside/Conversion Ford Flareside Dodge Stepside 13 Bed Parts Installation BED FLOOR 14 Bed Wood 17 Wood Finish Suggestions 18 Bed Strips 21 Angle Strips 24 Bed Bolt Kits 27 "No Bolts" Bed Parts BED PARTS 36 Front Bed Panels 38 Cross Sills/Reinforcement Strips 41 Rear Sills 42 Bed Sides and Upgrades/Teardrops 45 Stake Pockets/Extension Panels 46 Bed Side Hole Caps 47 Fleetside Repair Panels 48 Tailgates and Tailgate Parts 51 Tailgate Hinges 53 Tailgate Latches & Links 54 Tailgate Chains OTHER TRUCK PARTS 33 Restoration Parts 34 Hardware Pieces 55 Battery Trays and Assemblies 61 Trim Mouldings C Trim and Grille Pieces 67 Original Taillights CUSTOM TRUCK PARTS 68 Roll Pans 72 Tailgate Covers and Weld Ins 73 Tailgate Handle Relocator Kits 74 Tailgate Latches & Links MISCELLANEOUS 56 Ordering Information 57 Order Forms 59 Custom Bed Forms 66 Assembly Manuals and Books 75 Custom Items/55-57 Interior Stainless 2 TO ORDER CALL FAX

3 MAR-K PARTS AREN T FOR EVERYONE - JUST THOSE WHO WANT QUALITY PARTS BED WOOD - MAR-K bed wood is premium quality red oak or southern yellow pine. It is kiln dried to help prevent warping or cracking. Grooved, cut-to-size and ready-to-finish. Our inspectors carefully inspect and color match the boards in our wood kits. Mounting holes are countersunk and and Dodge holes are offset for proper installation. Kits from other companies may not include mounting holes. Made in Oklahoma City, USA. BED STRIPS AND ANGLE STRIPS - Bolt holes punched in the original hole pattern. Also available are bed strips with Hidden Bolts in stainless, steel or aluminum. Angles available in straight or curved sets depending on what was original for your truck. Custom hole patterns and lengths available. Made in Oklahoma City, USA. FRONT BED PANELS - Correct steel gage thickness. Accurate bends and dimensions for correct fit. Welds that stay welded and look right. Made in Oklahoma City, USA. MAR K WHY CHOOSE MAR-K BED PARTS? TAILGATES - Our parts, like our Fleetside Tailgate with latch and handle mechanism, are researched, developed and manufactured at MAR-K in Oklahoma City. It takes months of careful planning and toolmaking to develop a new part. Correct steel gage thickness. Accurate bends and dimensions for correct fit. Welds that stay welded and look right. These details result in an excellent quality tailgate made by MAR-K! Now available with stainless or steel hidden latches and link assemblies Made in Oklahoma City, USA. BED SIDES - Fender holes are punched in the original pattern. Complete bed sides include the stake pockets and steel angle strips welded on for ; stake pockets and the extension panels welded on for Ford. Bed sides available with or without the stake pocket holes on the top side of the curl. Custom Bed Sides made YOUR way with MAR-K's bed side upgrades. Add polished or unpolished stainless angles to your bed sides. Have tear drops welded onto the curls. There are so many choices! with or without the stake pockets with or without fender holes with or without the tailgate latch Made in Oklahoma City, USA. CROSS SILLS AND REAR CROSS SILLS - All mounting holes punched and brackets included for your year of truck. MAR-K rear cross sills have all holes drilled for wiring harnesses. Made in Oklahoma City, USA. TO ORDER CALL FAX

4 METAL BED KITS STEPSIDE Front bed panel with zinc plated hardware and long threaded rod MAR-K bed sides have stake pockets and steel angles welded on, fender holes punched and stake pocket holes in the top. Cross sills and rear cross sills include holes and brackets for attachment of wood bed kit and bed to frame. Chevrolet and C script tailgates are Restoration Parts supplied by MAR-K Specialized Mfg. METAL BED PARTS KITS A MAR-K Metal Bed Parts Kit is made up of a pair of complete bed sides, front bed panel, rear cross sill, cross sills (correct number for your truck year) and tailgate. These parts are all gage steel, depending on what was original. Kit also includes zinc plated tailgate chains* with black covers, steel tailgate hinges and zinc plated steel fasteners to bolt all of these pieces together along with the bed mounting blocks and pads necessary to install your kit. Detailed bed assembly instructions are included. Choose a MAR-K bed wood kit with oak or pine wood, steel, stainless, or aluminum bed strips, and steel or stainless hardware to complete the bed. Metal Bed Parts Kits ship by truck, freight prepaid and Chevy kits include MAR-K's smooth tailgate and Chevy kits include "CHEVROLET" script tailgate C kits include "C" script tailgate. * Chains purchased from an outside vendor. Short Stepside Kits CHEVY... $ kit CHEVY kit CHEVY kit CHEVY kit CHEVY kit CHEVY kit CHEVY* kit C* kit CHEVY* kit C* kit Long Stepside Kits CHEVY... $ kit CHEVY kit CHEVY 3/4 TON* kit C 1/2 TON* kit C 3/4 TON* kit CHEVY 3/4 TON* kit C 1/2 TON* kit C 3/4 TON* kit *Midway through the 51 model year, changed the number of bed strips from eight (8) strips to seven (7) strips. This change affects the bed wood, cross sills, rear cross sill and bolt kit. If you are ordering for a 51 pickup, please be sure to select for trucks with eight (8) bed strips or for trucks with seven (7) bed strips so your cross sills and rear sill will be correct. 4 TO ORDER CALL FAX

5 COMPLETE MAR-K BED - Bed kits are made to order, easy to install and include all holes punched. Our bed kits are precision made in our Oklahoma City manufacturing facility. We include the quality details that make our parts fit together and fit the truck. To order a complete MAR-K bed for your truck, you need to purchase a Metal Bed Parts Kit and a Bed Wood Kit. We separate these two (2) kits in order to give our customers the opportunity to buy exactly the wood bed kit that they want for their truck. For more technical details about each individual part, go to that section in our catalog. Call us or go online to customize your kit. MAR K BED WOOD KITS STEPSIDE MAR-K Bed Wood Kits are MADE IN THE USA! METAL BED PARTS KIT + BED WOOD KIT = COMPLETE MAR-K BED BED WOOD KITS Include bed wood boards with mounting holes; bed strips; and the bolts, nuts, washers and lockwashers (including angle strip bolts) needed to install the wood and strips. Choose from four (4) different wood/metal combinations to suit your style! For our oak kits, we select and machine oak bed wood from the finest quality Appalachian red oak lumber (show quality). The polished bed strips are precision roll formed and polished to a mirror finish in our own manufacturing shop. The oak/polished stainless kit includes brightly polished stainless bolts and offset washers. Or, select hidden mounting holes in the oak wood, choose from polished stainless or anodized aluminum bed strips with hidden fasteners, and the bed-to-frame and angle strip bolts are included. For daily driver use, choose our southern yellow pine wood with steel bed strips and zinc plated bolts to be painted before installation like the originals. Polished Stainless Bed Strips and Bolt Kits Oak Wood with Standard Mounting Holes Short Stepside Kits SHORT CHEVY... $ SHORT CHEVY A SHORT CHEV (NO SPARE) SHORT CHEVY A 39 SHORT CHEVY (NO SPARE) SHORT CHEVY SHORT CHEVY SHORT * SHORT * Long Stepside Kits LONG C 1/2 TON... $ LONG C 1/2 TON A LONG C (NO SPARE) LONG CHEVY LONG CHEVY LONG 3/4 TON* LONG C 1/2 TON* LONG 3/4 TON* LONG C 1/2 TON* Also available with Aluminum! Polished Stainless Bed Strips, Hidden Fasteners Oak Wood with Hidden Mounting Holes Short Stepside Kits SHORT CHEVY... $ SHORT CHEVY SHORT CHEVY SHORT CHEVY SHORT CHEVY SHORT * SHORT * Long Stepside Kits LONG C 1/2 TON... $ LONG C 1/2 TON LONG CHEVY LONG CHEVY LONG 3/4 TON* LONG C 1/2 TON* LONG 3/4 TON* LONG C 1/2 TON* Steel Bed Strips and Zinc Plated Bolt Kit Pine Wood with Standard Mounting Holes Short Stepside Kits SHORT CHEVY... $ SHORT CHEVY A SHORT CHEV (NO SPARE) SHORT CHEVY A 39 SHORT CHEVY (NO SPARE) SHORT CHEVY SHORT CHEVY SHORT * SHORT * Long Stepside Kits LONG C 1/2 TON... $ LONG C 1/2 TON A LONG C (NO SPARE) LONG CHEVY LONG CHEVY LONG 3/4 TON* LONG C 1/2 TON* LONG 3/4 TON* LONG C 1/2 TON* *Midway through the 51 model year, changed the number of bed strips from eight (8) strips to seven (7) strips. This change affects the bed wood, cross sills, rear cross sill and bolt kit. If you are ordering for a 51 pickup, please be sure to select for trucks with eight (8) bed strips or for trucks with seven (7) bed strips. TO ORDER CALL FAX

6 METAL BED KITS STEPSIDE MAR-K bed sides have stake pockets and angle strips welded on, all fender holes punched and stake pocket holes in the top. Chevrolet and C script tailgates are Restoration Parts supplied by MAR-K Specialized Mfg., an authorized General Motors Licensee. METAL BED PARTS KITS A MAR-K Metal Bed Parts Kit is made up of a pair of complete bed sides, front bed panel, rear cross sill, cross sills and reinforcement strips (correct number for your truck year) and tailgate. These parts are all gage steel, depending on what was original. Kit also includes zinc plated tailgate chains* with black covers, zinc plated steel trunnions and fasteners along with the bed mounting pads necessary to install your kit. Detailed bed assembly instructions are included. Choose a MAR-K bed wood kit with oak or pine wood, steel, stainless, or aluminum bed strips, and steel or stainless hardware to complete the bed. Metal Bed Parts Kits ship by truck, freight prepaid Chevy kits include "CHEVROLET" script tailgate C kits include "C" script tailgate. These include correct script for each year. * Chains purchased from an outside vendor. Front bed panel includes zinc plated hardware for mounting. Cross sills, rear cross sills and reinforcement strips include holes and brackets for attachment of wood bed kit and bed to frame. Short Stepside Kits st CHEVY... $ kit C kit nd-59 CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit Long Stepside Kits st CHEVY 3/4 TON... $ kit C 1/2 TON kit C 3/4 TON kit nd-57 CHEVY 89" kit C 89" kit CHEVY 97" kit C 97" kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit CHEVY kit C kit 6 TO ORDER CALL FAX

7 COMPLETE MAR-K BED - Bed kits are made to order, easy to install and include all holes punched. Our bed kits are precision made in our Oklahoma City manufacturing facility. We include the quality details that make our parts fit together and fit the truck. To order a complete MAR-K bed for your truck, you need to purchase a Metal Bed Parts Kit and a Bed Wood Kit. We separate these two (2) kits in order to give our customers the opportunity to buy exactly the wood bed kit that they want for their truck. For more technical details about each individual part, go to that section in our catalog. Call us or go online to customize your kit. MAR K BED WOOD KITS STEPSIDE MAR-K Bed Wood Kits are MADE IN THE USA! METAL BED PARTS KIT + BED WOOD KIT = COMPLETE MAR-K BED BED WOOD KITS Include bed wood boards with mounting holes; bed strips; and the bolts, nuts, washers and lockwashers (including angle strip bolts) needed to install the wood and strips. Choose from four (4) different wood/metal combinations to suit your style! For our oak kits, we select and machine oak bed wood from the finest quality Appalachian red oak lumber (show quality). The polished bed strips are precision roll formed and polished to a mirror finish in our own manufacturing shop. The oak/polished stainless kit includes brightly polished stainless bolts and offset washers. Or, select hidden mounting holes in the oak wood, choose from polished stainless or anodized aluminum bed strips with hidden fasteners, and the bed-to-frame and angle strip bolts are included. For daily driver use, choose our southern yellow pine wood with steel bed strips and zinc plated bolts to be painted before installation like the originals. Polished Stainless Bed Strips and Bolt Kit Oak Wood with Standard Mounting Holes Short Stepside Kits st SHORT STEP... $ nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside Kits st LONG 3/4 TON... $ LONG C 1/2 TON nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 14 1/8"* A LONG STEP 28 1/16"* *2nd mtg hole can be at 14 1/8" or 28 1/16" Also available with Aluminum! Polished Stainless Bed Strips, Hidden Fasteners Oak Wood with Hidden Mounting Holes Short Stepside Kits st SHORT STEP... $ nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside Kits st LONG 3/4 TON... $ LONG C 1/2 TON nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 14 1/8"* A LONG STEP 28 1/16"* *2nd mtg hole can be at 14 1/8" or 28 1/16" Steel Bed Strips and Zinc Plated Bolt Kit Pine Wood with Standard Mounting Holes Short Stepside Kits st SHORT STEP... $ nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside Kits st LONG 3/4 TON... $ LONG C 1/2 TON nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 14 1/8"* A LONG STEP 28 1/16"* *2nd mtg hole can be at 14 1/8" or 28 1/16" TO ORDER CALL FAX

8 CONVERSION KITS FLEETSIDE Front bed panel and zinc plated hardware. Bed sides are NOT included in the wood bed conversion kits. You can re-use your original bed sides, tailgate and wheel tubs. Cross sills, reinforcement strip and rear cross sill include holes and brackets for attachment of wood bed kit and bed to frame WOOD BED CONVERSION KITS Tired of the old steel floor in your pickup? Fix it up with a show quality wood bed from MAR-K Quality Parts. These Fleetside pickups were available from with a factory wood bed and we have the parts needed to convert your steel bed to a show winning wood bed. You can use your original bed sides, wheel tubs, and tailgate without modifications. Information on the conversion has been featured in Classic Trucks and Sport Truck Magazines. If you are interested in more information on how to convert your truck, visit our website, We have conversion instructions available online, plus much more. To convert your truck to a wood floor, purchase a Conversion Metal Parts Kit and your selection of a Bed Wood Kit according to your preference. Included in the Conversion Metal Parts Kit are the front bed panel, rear sill, cross sills (correct number for short or long), reinforcement strips and hardware for mounting the front panel and rear sill to your bed sides. Detailed instructions are included for removing the old steel floor parts and installing the new wood floor kit. Fleetside Wood Bed Conversion Kits SHORT FLEET...$ kit LONG FLEET kit 8 TO ORDER CALL FAX

9 MAR-K BED - Bed kits are made to order, easy to install and include all holes punched. Our conversion kits are precision made in our Oklahoma City manufacturing facility. Our bed kits include the quality details that make our parts fit together and fit the truck. To order a MAR-K bed for Fleetside Trucks, you need to purchase a Wood Bed Conversion Kit and a Bed Wood Kit. We separate these two (2) kits in order to give our customers the opportunity to buy exactly the wood bed kit that they want for their truck. Bed wood kits are available for Short Fleetside and Long Fleetside trucks. For more technical details about each individual part, go to that section in our catalog. Call us or go online to customize your kit. CONVERSION KIT + BED WOOD KIT = MAR-K BED MAR K BED WOOD KITS FLEETSIDE MAR-K Wood Bed Conversion Kits are MADE IN THE USA! BED WOOD KITS Include bed wood boards with mounting holes; bed strips; and the bolts, nuts, washers and lockwashers (including bed side flanges and wheel tub bolts) needed to install the wood and strips. Choose from four (4) different wood/metal combinations to suit your style! For our oak kits, we select and machine oak bed wood from the finest quality Appalachian red oak lumber (show quality). The polished bed strips are precision roll formed and polished to a mirror finish in our own manufacturing shop. The oak/polished stainless kit includes brightly polished stainless bolts and offset washers. Or, select hidden mounting holes in the oak wood, choose from polished stainless or anodized aluminum bed strips with hidden fasteners, and the bed-to-frame and angle strip bolts are included. For daily driver use, choose our southern yellow pine wood with steel bed strips and zinc plated bolts to be painted before installation like the originals. Polished Stainless Bed Strips and Bolt Kit Oak Wood with Standard Mounting Holes Short Fleetside Kits SHORT FLEET... $ SHORT FLEET SHORT FLEET SHORT FLEET Long Fleetside Kits LONG FLEET... $ LONG FLEET LONG FLEET LONG FLEET LONG FLEET 11 1/2"* A LONG FLEET 25 3/8"* *2nd mtg hole can be at 11 1/2" or 25 3/8" Longhorn Kits "... $ Also available with Aluminum! Polished Stainless Bed Strips, Hidden Fasteners Oak Wood with Hidden Mounting Holes Short Fleetside Kits SHORT FLEET... $ SHORT FLEET SHORT FLEET SHORT FLEET Long Fleetside Kits LONG FLEET... $ LONG FLEET LONG FLEET LONG FLEET LONG FLEET 11 1/2"* A LONG FLEET 25 3/8"* *2nd mtg hole can be at 11 1/2" or 25 3/8" Steel Bed Strips and Zinc Plated Bolt Kit Pine Wood with Standard Mounting Holes Short Fleetside Kits SHORT FLEET... $ SHORT FLEET SHORT FLEET SHORT FLEET Long Fleetside Kits LONG FLEET... $ LONG FLEET LONG FLEET LONG FLEET LONG FLEET 11 1/2"* A LONG FLEET 25 3/8"* *2nd mtg hole can be at 11 1/2" or 25 3/8" Longhorn Kits "... $ TO ORDER CALL FAX

10 METAL BED KITS Front bed panel and zinc plated hardware. MAR-K bed sides have stake pockets and extension panels welded on, all fender holes punched and stake pocket holes in the top. Cross sills and rear cross sill include holes and brackets for attachment of wood bed kit and bed to frame. METAL BED PARTS KITS MAR-K can supply the parts needed to replace the complete bed on your Ford Short Flareside pickup. These parts are designed to be identical to the originals and the resulting appearance of an allnew bed is exceptional. A MAR-K Metal Bed Parts kit is made up of a pair of bed sides, front bed panel, smooth tailgate (except for Ford), rear cross sill, two (2) center cross sills, the front cross sill and a steel bed wood sill. The parts are designed to match the year of your truck. They have all bolt holes for accurate assembly and they fit like a glove. Also included in the kit are zinc plated steel tailgate chains with black chain covers, steel tailgate hinges, and zinc plated steel fasteners to bolt all these pieces together along with the bed mounting blocks and/or pads neces- sary to install your kit. We provide detailed instructions with each Metal Bed Parts kit to guide you through the assembly and installation process. Choose a MAR-K bed wood kit with oak or pine wood, steel, stainless, or aluminum bed strips, and steel or stainless hardware to complete the bed. Metal Bed Parts Kits ship by truck, freight prepaid. Please note: Ford Kit does not include a tailgate Ford kits include a smooth tailgate. Short Flareside Kits $ kit kit kit kit kit Flareside is same as Stepside 10 TO ORDER CALL FAX

11 COMPLETE MAR-K BED - Bed kits are made to order, easy to install and include all holes punched. Our bed kits are precision made in our Oklahoma City manufacturing facility. We include the quality details that make our parts fit together and fit the truck. To order a complete MAR-K bed for your truck, you need to purchase a Metal Bed Parts Kit and a Bed Wood Kit. We separate these two (2) kits in order to give our customers the opportunity to buy exactly the wood bed kit that they want for their truck. For more technical details about each individual part, go to that section in our catalog. Call us or go online to customize your kit. MAR K BED WOOD KITS MAR-K Bed Kits are MADE IN THE USA! METAL BED PARTS KIT + BED WOOD KIT = COMPLETE MAR-K BED BED WOOD KITS Include bed wood boards with mounting holes; bed strips; and the bolts, nuts, washers and lockwashers (including the bed wood to bed side bolts) needed to install the wood and strips. Choose from four (4) different wood/metal combinations to suit your style! For our oak kits, we select and machine oak bed wood from the finest quality Appalachian red oak lumber (show quality). The polished bed strips are precision roll formed and polished to a mirror finish in our own manufacturing shop. The oak/polished stainless kit includes brightly polished stainless bolts and offset washers. Or, select hidden mounting holes in the oak wood, choose from polished stainless or anodized aluminum bed strips with hidden fasteners, and the bed-to-frame and angle strip bolts are included. For daily driver use, choose our southern yellow pine wood with steel bed strips and zinc plated bolts to be painted before installation like the originals. Long flareside wood boards do not have the necessary edge board cut outs, except for Polished Stainless Bed Strips and Bolt Kit Oak Wood with Standard Mounting Holes Polished Stainless Bed Strips, Hidden Fasteners Oak Wood with Hidden Mounting Holes Short Flareside Kits Short Flareside Kits Short Flareside Kits SHORT FLARE... $ SHORT FLARE... $ SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE* SHORT FLARE* SHORT FLARE* *Original Ford Short Flareside had one (1) large piece of wood and five (5) bed strips. MAR-K wood bed kits are made like the Ford Short Flareside with seven (7) boards and six (6) bed strips. Long Flareside Kits LONG FLARE ***... $ LONG FLARE LONG FLARE 39"** A LONG FLARE 40 1/8"** **2nd mtg hole can be at 39" or 40 1/8" LONG FLARE LONG FLARE Flareside is same as Stepside Also available with Aluminum! Long Flareside Kits LONG FLARE... $ LONG FLARE 39"** A LONG FLARE 40 1/8"** **2nd mtg hole can be at 39" or 40 1/8" LONG FLARE LONG FLARE Steel Bed Strips and Zinc Plated Bolt Kit Pine Wood with Standard Mounting Holes Long Flareside Kits LONG FLARE*** ****... $ ****The bed strip and side bolts in this kit are in a polished stainless as no zinc are available. Flareside is same as Stepside Flareside is same as Stepside ***48-52 Long Flare kit includes 5/16 X 4" carriage bolts for sides and strips to accommodate original wood cross sills. TO ORDER CALL FAX

12 BED WOOD KITS DODGE BED WOOD KITS Include bed wood boards with mounting holes; bed strips; and the bolts, nuts, washers and lockwashers (including angle strip bolts) needed to install the wood and strips. Choose from four (4) different wood/metal combinations to suit your style! MAR-K Bed Wood Kits are MADE IN THE USA! 1948 Dodge B1B Short Stepside JW Ramsey, Benton, AR For our oak kits, we select and machine oak bed wood from the finest quality Appalachian red oak lumber (show quality). The polished bed strips are precision roll formed and polished to a mirror finish in our own manufacturing shop. The oak/polished stainless kit includes brightly polished stainless bolts and offset washers. Or, select hidden mounting holes in the oak wood, choose from polished stainless or anodized aluminum bed strips with hidden fasteners, and the bed-to-frame and angle strip bolts are included. For daily driver use, choose our southern yellow pine wood with steel bed strips and zinc plated bolts to be painted before installation like the originals. Polished Stainless Bed Strips and Bolt Kit Oak Wood with Standard Mounting Holes Short Bed Kits SHORT 78" X 49"... $ SHORT 76" X 49" SHORT 76" X 49" SHORT 76" X 54" SHORT 76" X 54" Long Bed Kits LONG 90" X 54"... $ LONG 90" X 49" LONG 88" X 54" LONG 88" X 54" LONG 94" X 54" Power Wagon Kits PWR WN 95 3/4" X 54".. $ PWR WN 95 3/4" X 54" PWR WN 93 3/4" X 54" Also available with Aluminum! Polished Stainless Bed Strips, Hidden Fasteners Oak Wood with Hidden Mounting Holes Short Bed Kits SHORT 78" X 49"... $ SHORT 76" X 49" Long Bed Kits LONG 90" X 54"... $ LONG 90" X 49" LONG 88" X 54" Steel Bed Strips and Zinc Plated Bolt Kit Pine Wood with Standard Mounting Holes Short Bed Kits SHORT 78" X 49"... $ SHORT 76" X 49" SHORT 76" X 49" SHORT 76" X 54" SHORT 76" X 54" Long Bed Kits LONG 90" X 49"... $ LONG 94" X 54" TO ORDER CALL FAX

13 BED PARTS INSTALLATION When bed parts are being replaced, you should assemble the complete bed using the new unpainted parts to be sure everything fits correctly. Check that all holes align and make any adjustments or modifications at this time before the parts are painted. Follow along as we assemble a bed for a pickup. Your bed may be different depending on your make and model pickup. Specific instructions are included free with most restoration parts orders or may be ordered online or by calling the MAR-K office. Step 1. Lay out all parts in a clean area for installation. Step 2. Begin with one MAR-K bed side and the front bed panel. Fasten together using the front bed panel mounting bolt kit. Step 3. Attach the other bed side to the front bed panel in the same way. Step 4. Next, fit the rear cross sill into the openings in the stake pockets. Bolt the rear cross sill to the stake pockets with the rear cross sill mounting bolt kit. 2 4 Step 7. Install the remaining bed wood boards and bed strips. Keep the bolts fairly loose to allow for any adjustments. MAR K BED PARTS INSTALLATION Step 8. Lift the assembled bed onto the truck frame and attach with the bed-to-frame bolts. Some models require pads and wood blocks under the cross sills. Step 9. Attach the tailgate with hinges or trunnions at the base of the tailgate and with the chain assembly or latch at the top of the tailgate. Step 10. Attach the fenders and steps to verify the fender mounting holes are aligned with the bed side holes. If your bed sides do not have fender mounting holes, use the old bed side or a fender as a guide for drilling holes to attach the fenders. Step 11. You have now sucessfully assembled your bed! This is the time to do any modifications, such as welding or adding any holes for wiring harnesses or taillights. Then remove all hardware, disassemble the bed and clean and prepare your parts for priming and painting. Follow the same sequence for final assembly, carefully following directions to ensure correct hardware installation and squareness of the bed. 7 Step 5. Place the two edge boards in their position under the bed side angles and mark the boards through the holes. Drill 3/8" holes in the edge boards at each location. 5 Step 6. Bolt the edge boards and the cross sills to the bed side angles. 6 Stephen Vackar used MAR-K parts to replace his bed sides, tailgate, front bed panel, bed strips and more on his 1936 Chevy Short Stepside. He writes, I bought this bed from you over a year ago. This is my finished product. Stephen Vackar, Floresville, TX TO ORDER CALL FAX

14 BED WOOD OAK/PINE Cutting Bed Wood Boards in MAR-K's Wood Room. MAR-K grooves and cuts the boards to size. KILN DRIED WOOD Our wood is kiln dried (NOT pressure treated). This is a process of heating the boards to reduce the amount of moisture to less than 10% for OAK and less than 25% for PINE. Kiln drying helps prevent the boards from cracking and warping after installation. If a board looks slightly warped, try bolting it down to straighten it out. CUSTOM WOOD - If you have a flat bed truck, steel bed floor or any vehicle that did not originally have a wood floor, then we can make a custom wood bed according to your specifications. Let MAR-K help you make the wood floor to fit your measurements. We stock oak boards for a maximum finished length of about 110 inches. Keep in mind how many boards and metal strips you need for your application and provide the measurements indicated on our bed wood data sheet on page 60. We must know the dimensions of your bed area and the sizes of the boards to accurately design your specific application. Just fill out the bed wood data sheet and fax or mail it to us for a prompt response. MAR-K bed-to-frame holes are offset and countersunk for trucks. This makes the offset washer flush with the wood surface and prevents rotating and movement of the fastener just like the original pattern. BED WOOD BOARDS - Wood is available in red oak (show quality) or yellow pine (daily driver use). These are hard, durable, woods, with a thickness of 3/4". Made in Oklahoma City, USA. MAR-K grooves and cuts the boards to size. Our experienced wood cutters follow strict guidelines for selecting, checking, sorting, and machining the boards to manufacture an excellent product. Bed-to-frame mounting holes can be drilled using either the hidden bolt system or the standard countersunk holes as original. You can be assured that when you install MAR-K bed wood, it will fit like a glove. You should finish your wood as soon as possible after you receive it in order to achieve the best results. Heat shields are highly recommended to protect the wood floor from high exhaust temperatures. EXHAUST HEAT SHIELD This sheet metal shield protects your bed wood from heat of the exhaust system. It is mounted to the bottom side of the wood directly over the tailpipe where it goes over the rear axle. Includes mounting holes and stainless screws for attaching to the bed wood. Be sure to order two (2) heat shields if your truck is equipped with dual exhaust. Available in electrogalvanized steel or bright stainless. STAINLESS STEEL SHIELD WITH STAINLESS SCREWS $12.00 ea OR, DODGE OR CUSTOM ea STEEL SHIELD WITH STAINLESS SCREWS $ 6.00 ea OR, DODGE OR CUSTOM ea POLICY - We guarantee wood to be of proper fit. The wood is guaranteed for 14 days from ship date. For this reason you should wait to purchase wood until you are ready to install. IMPORTANT INFORMATION ON WOOD: OAK is FAS grade which means that the top face is free of defects. Oak is pre-sanded, grooved, cutto-size and ready for final sanding and finishing. It is considered show quality wood. PINE is grade "C" and its tolerances allow: firm knots max 3/8", some checking (splits), planing flaws on bottom of boards, bowed boards that flatten when installed, some natural discoloration and color variation are allowed. Pine is planed, cut-to-size and ready to sand and finish. We recommend that pine should either be painted (like the original wood beds) or finished with a natural finish, rather than stained. Pine is considered better for daily driver use. 14 TO ORDER CALL FAX

15 OAK OAK with mounting holes PINE MAR K BED WOOD CHEVY/C PINE with mounting holes Short Stepside.. $335 set SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $370 set LONG STEP C LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG STEP LONG STEP LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP 1 Ton Stepside.. $396 set TON 107" TON 107" TON 107 1/4" Short Stepside...$365 set SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP st SHORT STEP nd-59 SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside...$400 set LONG 1/2 TON C LONG 1/2 TON C LONG STEP CHEVY LONG STEP CHEVY LONG 1/2 TON C LONG 3/4 TON LONG 1/2 TON C LONG 3/4 TON st LONG 1/2 TON C st LONG 3/4 TON nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 14 1/8" A LONG STEP 28 1/16" 2nd mtg hole at 14 1/8" or 28 1/16" 1 Ton Stepside...$426 set TON 107" TON 107" nd-59 1 TON 107 1/4" Short Stepside.. $280 set SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $297 set LONG STEP C LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG STEP LONG STEP LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP 1 Ton Stepside.. $310 set TON 107" TON 107" TON 107 1/4" Short Stepside...$310 set SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP st SHORT STEP nd-59 SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside...$327 set LONG 1/2 TON C LONG 1/2 TON C LONG STEP CHEVY LONG STEP CHEVY LONG 1/2 TON C LONG STEP 3/4 TON LONG 1/2 TON C LONG STEP 3/4 TON st LONG 1/2 TON C st LONG 3/4 TON nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 14 1/8" A LONG STEP 28 1/16" 2nd mtg hole at 14 1/8" or 28 1/16" 1 Ton Stepside...$340 set TON 107" TON 107" nd-59 1 TON 107 1/4" Panel Truck... $485 set PANEL 1/2 TON 82" ALSO CANOPY EXPRESS Panel Truck...$515 set PANEL 1/2 TON 82" ALSO CANOPY EXPRESS Panel Truck... $365 set PANEL 1/2 TON 82" ALSO CANOPY EXPRESS Panel Truck...$395 set PANEL 1/2 TON 82" ALSO CANOPY EXPRESS Short Fleetside. $412 set SHORT WIDE SHORT WIDE Short Fleetside...$442 set SHORT WIDE SHORT WIDE SHORT WIDE SHORT WIDE Short Fleetside. $338 set SHORT WIDE SHORT WIDE Short Fleetside...$368 set SHORT WIDE SHORT WIDE SHORT WIDE SHORT WIDE Long Fleetside. $482 set Long Fleetside...$512 set Long Fleetside.. $350 set Long Fleetside...$380 set LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE LONG WIDE 11 1/2" LONG WIDE 11 1/2" Longhorn... $511 set A LONG WIDE 25 3/8" 2nd mtg hole at 11 1/2" or 25 3/8" Longhorn...$541 set Longhorn... $365 set A LONG WIDE 25 3/8" 2nd mtg hole at 11 1/2" or 25 3/8" Longhorn...$395 set " " " " "NO BOLTS" BED WOOD, BED STRIPS AND HARDWARE AVAILABLE - SEE PAGES TO ORDER CALL FAX

16 BED WOOD /DODGE OAK OAK with mounting holes PINE PINE with mounting holes Short Flareside... $335 set SHORT FLARE SHORT FLARE Short Flareside... $365 set SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Short Flareside...$300 set SHORT FLARE SHORT FLARE Short Flareside. $330 set SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Short Flareside... $358 set SHORT FLARE Short Flareside... $388 set SHORT FLARE SHORT FLARE Short Flareside...$315 set SHORT FLARE Short Flareside. $345 set SHORT FLARE SHORT FLARE Long Flareside... $450 set LONG FLARE LONG FLARE Long Flareside... $467 set LONG FLARE Flareside is same as Stepside Long Flareside...$480 set Long Flareside...$325 set LONG FLARE LONG FLARE LONG FLARE LONG FLARE 39" A LONG FLARE 40 1/8" 2nd mtg hole at 39" or 40 1/8" LONG FLARE Long Flareside...$497 set LONG FLARE Flareside is same as Stepside Flareside is same as Stepside Long Flareside.. $355 set LONG FLARE Flareside is same as Stepside DODGE Short Stepside... $400 set SHORT 78" x 48" SHORT 78" x 49" SHORT 76" x 49" DODGE Short Stepside...$430 set SHORT 78" x 49" SHORT 76" x 49" DODGE Short Stepside...$298 set SHORT 78" x 48" SHORT 78" x 49" SHORT 76" x 49" DODGE Short Stepside.. $328 set SHORT 78" x 49" SHORT 76" x 49" Short Stepside... $352 set SHORT 76" x 54" Long Stepside... $432 set LONG 90" x 48" LONG 90" x 49" Short Stepside...$382 set SHORT 76" x 54" SHORT 76" x 54" Long Stepside...$462 set LONG 90" x 49" Short Stepside...$315 set SHORT 76" x 54" Long Stepside...$325 set LONG 90" x 49" Short Stepside.. $345 set SHORT 76" x 54" SHORT 76" x 54" Long Stepside... $355 set LONG 90" x 49" Long Stepside... $467 set LONG 90" x 54" LONG 88" x 54" nd-85 LONG 94" x 54" Long Stepside...$497 set LONG 90" x 54" LONG 88" x 54" nd-71 LONG 94" x 54" Long Stepside...$335 set nd-85 LONG 94" x 54" Long Stepside... $365 set nd-71 LONG 94" x 54" Power Wagon... $472 set /4" x 54" /4" x 54" /4" x 54" Power Wagon...$502 set /4" x 54" /4" x 54" /4" x 54" Used oil based primer and best exterior grade black latex I could find...this truck is going to live outside and I drive it around during the week. Using the black paint was a result of reviewing MAR-K s analysis of finishes (urethane vs. paint)...my evaluation of the kit is excellent. Ken Slanker, 1980 Ford F-150 Short Flareside 16 TO ORDER CALL FAX

17 SUGGESTIONS FOR FINISHING BED WOOD The finish is very important for long-term enjoyment of your wood floor. A quality finish maintained over time will protect the wood for years. Applying a durable and attractive finish for your project will require time and effort but the steps are not difficult and do not require expensive equipment. MAR K MAR K WOOD FINISH SUGGESTIONS There is not a single best finish to use since each person s preferences and resources are different. Local professionals who work with wood products used or installed outdoors may recommend a product suited for your climate. Always select a top quality product and be sure it is designed for outdoor use and provides UV (ultraviolet) protection. Exterior urethane varnish may be applied directly to the bare wood and will provide a natural wood finish with great appearance. These will generally be suitable for bed wood applications that will rarely see severe weather extremes or 1972 Chevy Cheyenne Fleetside John Hunnell, Des Moines, IA direct sun exposure. A more durable finish may be obtained by using a two stage coating system. The primer or seal coat is a product such as epoxy whose function is to seal the wood and provide great adhesion to the wood surface. The topcoat product will adhere to the first coat and provide strength and damage protection as well as UV protection from deterioration due to sunlight exposure. Oil furniture finishes are not recommended for bed wood applications as they provide very little protection from damage and may not have good UV absorption to protect the wood. You can find specific wood finish testing information on our website that evaluates different brands and products. Just go to Here are a few suggestions that will help you achieve excellent results. 1. The boards must be kept clean. Keep your hands clean and be sure tools and work benches are free of grease and dirt. 2. Be sure the bed to frame bolt holes and bedside to bed wood bolt holes are drilled before finishing the wood. Finish the wood before it is installed so that all surfaces are coated. 3. Sand the surface with 120 grit and again with 180 or 220 grit sandpaper. Pine should be sanded enough to remove any planers marks. Always use a flat sanding block when sanding oak or pine to prevent cutting away the softer parts of the wood grains. Remove all sanding dust before applying the finish. 4. Failure of the finish usually occurs first at a sharp edge of the board or at the ends. Two hints: a. Round over all the sharp edges of the wood to at least 1/16 radius and more if you can. This will keep the coating from becoming thin on these areas. b. Be sure to saturate the ends of the boards with the coating until they will not absorb any more. We try to put twice as many coats of finish on the ends of the boards as on the surfaces. 5. Do not use the paint or varnish right out of the can. Always strain the amount you will need into a clean container and put the lid tightly on the original can. Do not return thinned paint or varnish to the original can. 6. Apply a thin coat using a high quality brush or paint spray gun. Be sure to coat all edges and ends of the boards, inside of all drilled holes, as well as the top and bottom surfaces. 7. When using a brush, be sure to clean the brush thoroughly between coats. If a small amount of varnish remains in the brush, it will dry and flow into the next coat of varnish leaving the finished surface rough. 8. After allowing plenty of time for each coat to dry, sand the surface to be re-coated with 220 grit sandpaper and a sanding block. Sand just enough to remove brush marks or orange peel. Be sure to remove all sanding dust before applying the next coat. It is best to do sanding in a separate room to keep the paint room clean and free of sanding particles. 9. Re-coat the boards on all surfaces following steps 4 through 8 above to obtain at least 3 full coats covering the boards. Do not sand the boards after the final coat. 10. Inspect the wood regularly after installation and repair or refinish any damages that appear over time. The wood will provide a long life if the finish is maintained and repaired as needed. If you are not certain how to finish your boards and would like to experiment, ask the sales person for some samples of the type of wood you are planning to purchase. For a small charge, you can receive several short lengths of wood which may be used to check your finishing material and techniques. TO ORDER CALL FAX

18 BED STRIPS Steel material goes through a roll former to create new, Ford or Dodge bed strips. BED STRIPS Bed strips are formed metal strips bolted between the boards in the pickup bed floor. MAR-K bed strips are roll formed in our manufacturing facility, and available in unpolished stainless and polished stainless for the chrome look or in steel which may be painted as original. Square holes are punched in the bed strips according to the original pattern. Dimensions are 1-1/2" wide, and 18 gage, approximately.048" thickness. Made in Oklahoma City, USA. Bed strips may be ordered without holes or in any length for custom applications. Call for an estimate. Also available are bed strips with hidden fasteners. See pages for Hidden Bolts bed strips in stainless, steel and aluminum and the "no bolts" bed wood. Stainless Steel: Bed strips, angle strips, and stainless mouldings are made of type 430 bright stainless steel, selected because of its color. It is a magnetic grade of stainless formulated for automotive stainless steel trim. When it is polished and buffed, its bright color looks similar to chrome plating. Stainless hardware items such as bolts, nuts, tailgate chain parts, and bed-to-frame washers are made of nonmagnetic stainless selected for superior resistance to rust and corrosion. Care of stainless / Rusting - With proper care, stainless steel will remain bright and smooth for long periods of time. It may be cleaned with liquid polish intended for stainless or chrome. DO NOT use steel wool, a steel wire brush, or a buffing wheel which has been used on steel or other metals. Bright stainless parts should be coated with a good nonabrasive wax for maximum protection. Stainless steel will rust or corrode under certain conditions, especially when contaminants such as salt water, battery acid, or steel particles and moisture are present. Frequent washing and waxing are a great protection for stainless steel surfaces. CUSTOM BED STRIPS - Good news! If you have a flat bed truck, steel bed floor, or any other vehicle that did not have a standard pattern for strips and wood, then we can make bed strips to your specifications. MAR-K can help you design your custom bed strips. We can supply any length strips with or without square holes according to your special pattern. Strips are1.50" wide and can be made in any length. The flat area in the center of the strips is.70" wide, which is large enough for a 5/16 carriage bolt head. The rolled edges are.25" tall. We generally recommend approximately 12" to 15" bolt spacing to minimize distortion. When bolting strips to an existing truck bed, be sure to avoid specifying hole locations that would interfere with structure on the under side of the bed floor. Please fill out the bed strip data sheet on page 59, and we will custom fit your bed! We do not punch round holes in bed strips. If you choose to drill your own round holes at the time of assembly, the bed strips may be attached with ribbed neck carriage bolts or other screws having a head diameter less than 3/4". Refer to pages for stainless or steel fasteners to attach your bed strips. AND DODGE OWNERS The shape of MAR-K bed strips is very similar to that used in pickups. Ford and Dodge trucks had a slightly different shape. The MAR-K bed strips may be used on any pickup bed, but when replacing strips in a Ford or Dodge all the strips in the bed should be replaced so they all have the same appearance. See page 20 for parts and prices. Tech Tip: TRUCKS The front hole of each bed strip in '67 and newer trucks is 5/16" square and the remaining holes are 1/4". When installing strips in these models be sure to use the correct bolt size at each hole location so the bolt kit quantity will be correct. Tech Tip: The Ford short bed flareside has a wood bed floor that is a large piece of wood with five (5) metal strips bolted down to it. For these trucks, we manufacture a set of seven (7) boards, and six (6) strips, similar to the model Fords. That is why you see the quantity of six (6) strips for this series of truck. 18 TO ORDER CALL FAX

19 Polished Stainless Steel Short Stepside... $20.00 ea SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY A SHORT STEP (NO SPARE) SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $22.50 ea LONG STEP C LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP ST LONG STEP LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $24.50 ea STEPSIDE 107" STEPSIDE 107 1/4" Panel Truck/Canopy Express /2 TON 82"... $ set ST 1/2 TON 79 1/2" ea ST 1 TON 110 1/2" ea Short Fleetside... $ set SHORT WIDE Short Fleetside... $ set SHORT WIDE SHORT WIDE Long Fleetside... $ set LONG WIDE Long Fleetside... $ set LONG WIDE LONG WIDE LONG WIDE Long Fleetside... $ set LONG WIDE Longhorn... $ set " Unpolished Stainless Steel Short Stepside... $14.00 ea SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY A SHORT STEP (NO SPARE) SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $16.50 ea LONG STEP C LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP ST LONG STEP LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $18.00 ea STEPSIDE 107" STEPSIDE 107 1/4" Panel Truck/Canopy Express /2 TON 82"... $ set ST 1/2 TON 79 1/2" ea ST 1 TON 110 1/2" ea Short Fleetside... $ set SHORT WIDE Short Fleetside... $ set SHORT WIDE SHORT WIDE Long Fleetside... $ set LONG WIDE Long Fleetside... $ set LONG WIDE LONG WIDE LONG WIDE Long Fleetside... $99.00 set LONG WIDE Longhorn... $ set " Steel MAR K BED STRIPS CHEVY/C Short Stepside... $9.00 ea SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY A SHORT STEP (NO SPARE) SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $10.00 ea LONG STEP C LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP ST LONG STEP LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $11.00 ea STEPSIDE 107" STEPSIDE 107 1/4" Panel Truck/Canopy Express /2 TON 82"... $ set ST 1/2 TON 79 1/2" ea ST 1 TON 110 1/2" ea Short Fleetside... $99.00 set SHORT WIDE Short Fleetside... $81.00 set SHORT WIDE SHORT WIDE Long Fleetside... $ set LONG WIDE Long Fleetside... $90.00 set LONG WIDE LONG WIDE LONG WIDE Long Fleetside... $60.00 set LONG WIDE Longhorn... $ set " "NO BOLTS" BED WOOD, BED STRIPS AND HARDWARE AVAILABLE SEE - PAGES Order MAR-K bed strips with hidden fasteners for a "no bolts" look to your bed. This works great with MAR-K bed wood with special recessed mounting holes made to hide your bed-to-frame bolts. TO ORDER CALL FAX

20 BED STRIPS /DODGE Polished Stainless Steel Short Flareside... $20.00 ea MODEL A SHORT FLARE SHORT FLARE* *2 strips w/ bed-to-frame mounting holes SHORT FLARE* * no bed-to-frame mounting holes SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside... $22.50 ea LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside DODGE Short Stepside... $20.00 ea SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" st SHORT STEP 76" nd-85 SHORT STEP 76" Long Stepside... $22.50 ea LONG STEP 90" LONG STEP 90" LONG STEP 88" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" Power Wagon... $22.50 ea /4" /4" NO HOLES (DRILL YOUR OWN)* /8"... $19.00 ea " ea " ea Unpolished Stainless Steel Short Flareside... $14.00 ea MODEL A SHORT FLARE SHORT FLARE* *2 strips w/ bed-to-frame mounting holes SHORT FLARE* * no bed-to-frame mounting holes SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside... $16.50 ea LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside DODGE Short Stepside... $14.00 ea SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" st SHORT STEP 76" nd-85 SHORT STEP 76" Long Stepside... $16.50 ea LONG STEP 90" LONG STEP 90" LONG STEP 88" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" Power Wagon... $16.50 ea /4" /4" NO HOLES (DRILL YOUR OWN)* /8"... $13.00 ea " ea " ea Steel Short Flareside... $9.00 ea MODEL A SHORT FLARE SHORT FLARE* *2 strips w/ bed-to-frame mounting holes SHORT FLARE* * no bed-to-frame mounting holes SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside... $10.00 ea LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside DODGE Short Stepside... $9.00 ea SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" st SHORT STEP 76" nd-85 SHORT STEP 76" Long Stepside... $10.00 ea LONG STEP 90" LONG STEP 90" LONG STEP 88" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" Power Wagon... $10.00 ea /4" /4" NO HOLES (DRILL YOUR OWN)* /8"... $ 8.50 ea " ea " ea *BED STRIPS ARE AVAILABLE AT ANY LENGTH. PLEASE INQUIRE FOR PRICE.* NO HOLES BED STRIPS CAN BE USED FOR ANY MAKE OF TRUCK BED. THESE CAN BE CUT TO YOUR SPECIFICATIONS FOR ANY CUSTOM APPLICATION. *BED STRIPS ARE AVAILABLE AT ANY LENGTH. PLEASE INQUIRE FOR PRICE.* NO HOLES BED STRIPS CAN BE USED FOR ANY MAKE OF TRUCK BED. THESE CAN BE CUT TO YOUR SPECIFICATIONS FOR ANY CUSTOM APPLICATION. *BED STRIPS ARE AVAILABLE AT ANY LENGTH. PLEASE INQUIRE FOR PRICE.* NO HOLES BED STRIPS CAN BE USED FOR ANY MAKE OF TRUCK BED. THESE CAN BE CUT TO YOUR SPECIFICATIONS FOR ANY CUSTOM APPLICATION. "NO BOLTS" BED WOOD, BED STRIPS AND HARDWARE AVAILABLE Order MAR-K bed strips with hidden fasteners for a "no bolts" look to your bed. This works great with MAR-K bed wood with special recessed mounting holes made to hide your bed-to-frame bolts. Available in stainless, steel and aluminum. See pages for prices and more information. 20 TO ORDER CALL FAX

21 ANGLE STRIPS - Angle strips are like the bed strips, but they fit in the corners of the bed along the bed side. The angle strip is original in and Dodge stepside trucks. The angle bolts to the bed wood and was originally spot-welded to the side. Notice the bed wood edge boards do not have a groove for the angle strip. It sits on top of the wood. Angle strips are roll formed in our shop and available in polished stainless for the "chrome" look, unpolished stainless or steel, if you plan to paint them like original. Angles are punched with square 5/16" holes according to the original hole pattern. The dimensions are 1 1/2 X 1" and they are 18 gage thickness. Made in Oklahoma City, USA. Unpunched angle strips are available at any specified length. Call for an estimate. Tech Tip: Removal of original angles * If bolts are rusted, an air chisel or bolt cutter may be needed. * Remove wood. * Take measurements of original angles so replacements will go in the same place. * Drill 1/4" hole through the spot welds (appx. every 3" along angle) and pry angle loose (screwdriver may work). * Grind off spot welds using a body grinder. * Clamp new angle in place - make sure it is straight and positioned accurately. * Weld the new angle in place from outside - weld right through the holes you drilled. HINT: Be careful not to use excessive heat which would burn through the angle - use an aluminum or copper block clamped to the angle strip at the weld to reduce distortion and discoloring from the weld. * Grind the weld smooth. * Angles can be bolted to side as an alternative to welding: we recommend 5/16 X 3/4 Phillips drive bolts about 6-8" apart. Acorn nuts can be used on the outside where bolt and nut are visible. * SPECIAL CONDITION FOR STEPSIDE: This pickup originally had the angle strip bolts welded to the angle. This makes removal and replacement of the bolts very difficult. We recommend grinding off the bolt heads first and drilling out the bolts, before installing the angle covers. If the original angles and bolts are in good condition, you may want to leave them and replace only the wood. These are general instructions. Angles include detailed instructions for removal and installation. These are also available online at MAR K ANGLE STRIPS Polished stainless material goes through a special roll former to create the bend in angle strips. CUSTOM ANGLE STRIPS - MAR-K can design your custom angle strips cut to any length. They can be made with or without holes. For custom hole patterns, please fill out the bed strip data sheet on page 59, and we will fit your bed! Angle strip shape and width cannot be changed. AND DODGE OWNERS - Ford beds did not have angles originally, however, MAR-K offers repair angles that can be used to cover the rusted area along straight bed sides. MAR-K offers replacements for the original angles for Dodge trucks. The angles come in straight or curved sets depending on the year and whether it is a "high side" or "low side". See page 23 for Ford and Dodge angles. MAR-K OFFERS BED SIDE UPGRADES Let MAR-K weld stainless angles on your bed sides instead of steel. These angles have the same hole pattern as your original angle strips. MAR-K bed sides include steel angles welded to the bed side panels. Bed sides can be "upgraded" for an additional charge. For more information on bed side upgrades see pages 43 and 44. TO ORDER CALL FAX

22 ANGLE STRIPS CHEVY/C Polished Stainless Steel Short Stepside... $70 pr CHEVY (CURVED*) *SLIGHTLY CURVED IN THE CENTER TO MATCH THE SHAPE OF ORIGINAL BED SIDES Short Stepside... $60 pr CHEVY (STRAIGHT) CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $66 pr LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $72 pr TON 107" TON 107 1/4" Unpolished Stainless Steel Short Stepside... $60 pr CHEVY (CURVED) *SLIGHTLY CURVED IN THE CENTER TO MATCH THE SHAPE OF ORIGINAL BED SIDES Short Stepside... $50 pr CHEVY (STRAIGHT) CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $56 pr LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $60.50 pr TON 107" TON 107 1/4" Steel Short Stepside... $40 pr CHEVY (CURVED) *SLIGHTLY CURVED IN THE CENTER TO MATCH THE SHAPE OF ORIGINAL BED SIDES Short Stepside... $30 pr CHEVY (STRAIGHT) CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $36 pr LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP 1 Ton Stepside... $38 pr TON 107" TON 107 1/4" ANGLE COVERS - Angle covers are made for and Dodge straight side Stepside trucks only. They are made like an angle strip, but they bolt right over the existing angle strip to renew the appearance. MAR-K makes angle covers in polished stainless, unpolished stainless and steel, just like angle strips. Made in Oklahoma City, USA. With the angle cover, you do not have to hassle with removing the original angle. The angle covers come without holes. You will be drilling your own holes to line up with your original angle. Since these will be round holes, make sure you order "ribbed neck" carriage bolts in your hardware kit. Ribbed neck bolts are made to fit into a round hole, while the regular carriage bolts fit into a square hole. See page 24 for more information on ribbed neck bolts. SPECIAL CONDITION FOR STEPSIDE: This pickup originally had the angle strip bolts welded to the angle. This makes removal and replacement of the bolts very difficult. We recommend grinding off the bolt heads first and drilling out the bolts, before installing the angle covers. If the original angles and bolts are in good condition, you may want to leave them and replace only the wood. and DODGE Angle Covers... $25 ea /8" and DODGE Angle Covers... $20 ea /8" and DODGE Angle Covers... $12 ea /8" Angle Covers... $28 ea " LONG " LONG Angle Covers... $23 ea " LONG " LONG Angle Covers... $15 ea " LONG " LONG 22 TO ORDER CALL FAX

23 Polished Stainless Steel Repair Angles... $60 pr SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE Unpolished Stainless Steel Repair Angles... $50 pr SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE Steel MAR K ANGLE STRIPS /DODGE Repair Angles... $30 pr SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE SHORT FLARESIDE Flareside is same as Stepside Flareside is same as Stepside Flareside is same as Stepside Ford angles are used to repair rusted areas along the bed sides. The repair angles are made like the Dodge style angles. See inset below. Ford beds did not originally have angles. DODGE Short Stepside Straight... $60 pr SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" Short Stepside Curved... $260 set SHORT STEP 76" DODGE Short Stepside Straight... $50 pr SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" Short Stepside Curved... $200 set SHORT STEP 76" DODGE Short Stepside Straight... $30 pr SHORT STEP 78" SHORT STEP 78" SHORT STEP 76" SHORT STEP 76" Short Stepside Curved... $120 set SHORT STEP 76" Long Stepside Straight... $66 pr LONG STEP 89" LONG STEP 90"x 49" Long Stepside Curved... $266 set LONG STEP 90"x 54" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" POWER WAGON 95 3/4" POWER WAGON 93 3/4" Long Stepside Straight... $56 pr LONG STEP 89" LONG STEP 90"x 49" Long Stepside Curved... $206 set LONG STEP 90"x 54" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" POWER WAGON 95 3/4" POWER WAGON 93 3/4" Long Stepside Straight... $36 pr LONG STEP 89" LONG STEP 90"x 49" Long Stepside Curved... $126 set LONG STEP 90"x 54" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" POWER WAGON 95 3/4" POWER WAGON 93 3/4" DODGE ANGLES - Dodge angles are available in two (2) types, straight angles and curved angles. The straight angles fit stepside beds up to 1960 that are about 49" wide inside and do not have indented wheel wells. The curved angles fit high side beds that have an indented wheel well and are about 54" wide inside. Curved angles are supplied as a six-piece (6) set with two (2) short straight pieces and a curved piece for each bed side. The curved piece fits around the indented wheel well area and a straight piece is attached behind and in front of the curved angle. Curved angles are used on 54" wide Dodge stepside beds from 1948 up to the 1985 model year. MAR-K makes Dodge angles like the original Dodge style. See the end view in the inset at left. Dodge style angles are also available with no holes. TO ORDER CALL FAX

24 BED BOLT KITS Unpolished stainless bolts are inserted into this special polishing machine to make the heads shine like chrome! RIBBED NECK CARRIAGE BOLT FOR STRIPS WITH ROUND HOLES- At MAR-K, we punch square holes in all of our bed strips and angle strips, and we include square shoulder carriage bolts in the standard bed bolt kits. However, there are times when you need a "ribbed neck bolt" which is made for round holes. Such instances would include: 1. If you are reusing your original strips or angles and they have round holes. 2. If you purchased angle covers or bed strips/ angle strips with no holes, and will be drilling your own round holes. MAR-K offers bolt kits with ribbed neck bolts to fit several different situations. The kits with ribbed neck bolts for angle covers can be found online, or you can call our office for help in getting the bolt kit you need to fit your application. PRICE IS EXTRA PER KIT WHEN RIBBED NECK BOLTS ARE USED. BED BOLT KITS - Hardware kits include all bolts, nuts, and washers to install the bed wood, bed strips, and angle strips. Hardware kits are available in polished stainless, unpolished stainless and zinc plated steel. The bolts in the hardware kits are carriage bolts. This means they have a smooth rounded head and a square shoulder to fit into a square hole. Polished stainless bolts are shiny like chrome, while unpolished stainless have a matte finish. The zinc plated steel bolts appear shiny, but you need to paint these bolts to prevent rusting. The large bolts that bolt the bed to the frame are included in the bed bolt kit, along with the large washers that fit in the bed wood countersunk holes. Bolts can be purchased separately, and are also available in polished stainless, unpolished stainless or zinc plated steel. For individual hardware pieces, see pages Kits assembled in Oklahoma City, USA C Stepside - William Thornton, Lenox, MA Shows how the bed strip bolts fall between the wood boards and bolt underneath the wood. Where there is not a cross sill, the bolts are secured by flat washers. MAR-K Quality Parts also sells bed-to-frame kits and strips and sides kits. Call for prices on both. These are not listed online or in this catalog. Bed-to-frame: Kit includes all large bolts, nuts and washers to attach the bed wood to the frame. The large bed-to-frame washers sit in the countersunk holes and the bed-to-frame bolt goes through this washer. Strips and Sides: Kit includes all the carriage bolts, nuts and washers to bolt the strips and bed sides to the bed wood. SPECIAL CONDITION STEPSIDE This pickup originally had the angle strip bolts welded to the angle. This makes removal and replacement of the bolts very difficult and may cause distortion or damage to the angle. You may want to keep the original bolts in place if the threads are not damaged or rusted. You can remove the edge board without taking the angle strip bolts out by destroying the old edge boards. New edge boards are installed by sawing a slot from the angle strip bolt hole to the edge of the board, then sliding the edge board under the angle strip. MAR-K complete bed bolt kits above include standard carriage bolts for replacing the original angle strip bolts. These would normally be used when replacing the angle strip with a new one using square holes. When replacing bolts in the original angle, ribbed neck bolts may be specified. 24 TO ORDER CALL FAX

25 To Prevent Galling: Always use anti-seize compound on the threads of stainless steel fasteners. Do not use a high-speed power tool or impact wrench to install the fasteners. Anti-seize compounds are available at most auto supply stores. Polished Stainless Steel Short Stepside Kits SHORT STEP CHEVY... $ SHORT STEP CHEVY SHRT CHEV (NO SPARE) SHORT STEP CHEVY SHORT STEP CHEVY SHORT (8 STRIPS) SHORT (7 STRIPS) st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP Unpolished Stainless Steel Short Stepside Kits SHORT STEP CHEVY... $ SHORT STEP CHEVY SHRT CHEV (NO SPARE) SHORT STEP CHEVY SHORT STEP CHEVY SHORT (8 STRIPS) SHORT (7 STRIPS) st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP Zinc Plated MAR K BED BOLT KITS CHEVY/C Short Stepside Kits SHORT STEP CHEVY... $ SHORT STEP CHEVY SHRT CHEV (NO SPARE) SHORT STEP CHEVY SHORT STEP CHEVY SHORT (8 STRIPS) SHORT (7 STRIPS) st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG (8 STRIPS) LONG (7 STRIPS) st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Ton Stepside Kits TON (8 STRIPS)... $ TON (7 STRIPS) TON Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG (8 STRIPS) LONG (7 STRIPS) st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Ton Stepside Kits TON (8 STRIPS)... $ TON (7 STRIPS) TON Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG (8 STRIPS) LONG (7 STRIPS) st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Ton Stepside Kits TON (8 STRIPS)... $ TON (7 STRIPS) TON Panel Truck/Canopy Express Kits /2 TON 82"... $ Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Panel Truck/Canopy Express Kits /2 TON 82"... $80.00 Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Panel Truck/Canopy Express Kits /2 TON 82"... $48.00 Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Longhorn Kits "... $ Fleetside Steel Floor Kits SHORT/LONG WIDE... $44.00 Longhorn Kits "... $ Fleetside Steel Floor Kits SHORT/LONG WIDE... $32.00 Longhorn Kits "... $57.00 PERIMETER MOUNTING HARDWARE KIT - For Steel Floor Trucks includes all carriage bolts 5/16-18 X 3/4 to attach front bed panel, bed sides and wheel houses to the steel floor structure. Does not include Bed to Frame bolts. Fleetside Steel Floor Kits SHORT/LONG WIDE... $22.00 TO ORDER CALL FAX

26 BED BOLT KITS /DODGE Polished Stainless Steel Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE 6BS SHORT FLARE 5BS Long Flareside Kits LONG FLARE*... $ LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" nd-71 SHORT 76" x 54" SHORT 76" x 54" To Prevent Galling: Always use anti-seize compound on the threads of stainless steel fasteners. Do not use a high-speed power tool or impact wrench to install the fasteners. Anti-seize compounds are available at most auto supply stores. Unpolished Stainless Steel Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE 6BS SHORT FLARE 5BS Long Flareside Kits LONG FLARE*... $ LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" nd-71 SHORT 76" x 54" SHORT 76" x 54" Zinc Plated Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE 6BS SHORT FLARE 5BS Long Flareside Kits LONG FLARE* LONG FLARE LONG FLARE LONG FLARE Flareside is same as Stepside *48-52 Long Flare kit includes 5/16 X 4" carriage bolts for sides and strips to accommodate original wood cross sills. DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" nd-71 SHORT 76" x 54" SHORT 76" x 54" Long Stepside Kits LONG 90" x 54"... $ LONG 90" x 49" LONG 88" x 54" st 88" (A-S only) nd-85 94" (A-S only) Long Stepside Kits LONG 90" x 54"... $ LONG 90" x 49" LONG 88" x 54" st 88" (A-S only) nd-85 94" (A-S only) Long Stepside Kits LONG 90" x 54"... $ LONG 90" x 49" LONG 88" x 54" st 88" (A-S only) nd-85 94" (A-S only) Power Wagon Kits /4" x 54"... $ /4" x 54" /4" x 54" fender bolts kits include 5/16 x 3/4 phillips fender bolts. MAR-K also offers clutch head bolt kits in zinc plated steel for earlier models. fender bolts are 5/16 x 1" flat head with a square shoulder, in unpolished stainless only. DODGE fender bolts kits include 5/16 x 1" phillips drive in original Dodge style or MAR-K design. INDIVIDUAL FENDER BOLTS - SEE PAGES REAR FENDER BOLT KITS POLISHED STAINLESS... $ UNPOLISHED STAINLESS ZINC PLATED ZINC PLATED CLUTCH HEAD POLISHED STAINLESS UNPOLISHED STAINLESS ZINC PLATED ZINC PLATED CLUTCH HEAD st POLISHED STAINLESS Power Wagon Kits /4" x 54"... $ /4" x 54" /4" x 54" Power Wagon Kits /4" x 54"... $ /4" x 54" /4" x 54" FENDER BOLT KITS st UNPOLISHED STAINLESS... $ st ZINC PLATED st ZINC PLATED CLUTCH HEAD nd-66 POLISHED STAINLESS nd-66 UNPOLISHED STAINLESS nd-66 ZINC PLATED nd-66 ZINC PLATED CLUTCH HEAD POLISHED STAINLESS UNPOLISHED STAINLESS ZINC PLATED POLISHED STAINLESS UNPOLISHED STAINLESS ZINC PLATED REAR FENDER BOLT KITS UNPOLISHED STAINLESS... $ UNPOLISHED STAINLESS DODGE REAR FENDER BOLT KITS DODGE POLISHED STAINLESS - MAR-K DESIGN $ DODGE UNPOL STAINLESS - MAR-K DESIGN DODGE ZINC PLATED - MAR-K DESIGN DODGE ZINC PLATED - ORIG DODGE STYLE DODGE POLISHED STAINLESS - MAR-K DESIGN DODGE UNPOL STAINLESS - MAR-K DESIGN DODGE ZINC PLATED - MAR-K DESIGN DODGE ZINC PLATED - ORIG DODGE STYLE DODGE POLISHED STAINLESS - MAR-K DESIGN DODGE UNPOL STAINLESS - MAR-K DESIGN DODGE ZINC PLATED - MAR-K DESIGN DODGE ZINC PLATED - ORIG DODGE STYLE TO ORDER CALL FAX

27 "NO BOLTS" WOOD BEDS - You can install MAR-K bed wood with the large bedto-frame bolts hidden under the wood. This gives a smooth, clean look to the bed floor, especially when used with MAR-K "hidden bolt" bed strips. Our bed strips with hidden fasteners were developed by MAR-K to give your bed a smooth custom look. The bed strips have special bolts which slide in the groove on the underside of the strip to adjust to any hole location. The bottom surface of the wood is drilled with a recessed clearance around the bolt head. The wood is grooved on the sides for the bed strips just like the original wood. The boards and strips rest on the cross sills as original, completely hiding the bed-to-frame and bed strip bolts. No welding is needed for installation of a "no bolts" bed. The bed-to-frame bolts go through square mounting holes in the cross sills and the bolt head is under the bed wood as shown below. No bolts wood beds are made in Oklahoma City, USA. Tech Tip: Cross Sills and No Bolts Wood - MAR-K's "no bolts" system may require modification to your existing cross sills. If you are ordering MAR-K cross sills with your bed wood, the cross sill holes punched are square to accommodate the square shoulder of the bed-toframe carriage bolt. If you are using stock cross sills, the holes will be round. Use a file to make the holes slightly larger and more square to fit the bolt. MAR K "NO BOLTS" BED WOOD/STRIPS Polished stainless material is put into a roll former to make the bed strips with hidden fasteners. CUSTOM BEDS: MAR-K can make hidden bolts bed strips to fit almost any truck. Aluminum bed strips are available in custom lengths of up to 97" long. Hidden fasteners are included. Polished Stainless, Unpolished Stainless and Steel hidden bolts bed strips are available in nearly any custom length and also include the fasteners. Call our sales staff to order. HIDDEN FASTENERS: These special bolts slide into the groove on the underside of the bed strips to adjust to any bolt location. Includes nut and washers. Bed strips with hidden fasteners include all fasteners needed to replace the original bolts. Order this fastener only if you need extras or for custom applications. Available in 1-1/4" length for most bed strips and 2" for special applications. Please specify what size fasteners you need when you order your strips. Bed Strip Fasteners T-Bolt FASTENERS 1-1/4"...$ T-Bolt FASTENERS 2" The bottom surface of the wood is drilled with a recessed clearance around the bolt head. The boards and strips rest on the cross sills as original, completely hiding the bed-toframe and bed strip bolts. MAR-K's oak bed wood is show quality and pine bed wood is recommended for daily driver use. For more detailed information on oak and pine bed wood, please see the bed wood section, page 14. TO ORDER CALL FAX

28 "NO BOLTS" BED Oak Bed Wood with Hidden Holes Short Stepside... $365 set HM HM HM HM HM HM HM HM HM HM HM HM HM SHORT STEP CHEVY SHORT STEP CHEVY 39 SHORT STEP CHEVY SHORT STEP CHEVY 46 SHORT STEP CHEVY SHORT STEP SHORT STEP st SHORT STEP 55-2nd-59 SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $400 set HM 36 LONG STEP C 1/2 Ton HM LONG STEP C 1/2 Ton HM LONG STEP CHEVY HM 46 LONG STEP CHEVY HM LONG 1/2 Ton C HM LONG 3/4 Ton HM LONG 1/2 Ton C HM LONG 3/4 Ton HM st LONG 1/2 Ton C HM st LONG 3/4 Ton HM 55-2nd-57 LONG STEP 89" HM LONG STEP 97" HM LONG STEP HM LONG STEP HM LONG STEP HM LONG STEP /8" HM-A LONG STEP /16" 2nd mtg hole at 14 1/8" or 28 1/16" Short Fleetside... $442 set HM SHORT WIDE HM SHORT WIDE HM SHORT WIDE HM SHORT WIDE Long Fleetside... $512 set HM LONG WIDE HM LONG WIDE HM LONG WIDE HM LONG WIDE HM LONG WIDE /2" HM-A LONG WIDE /8" 2nd mtg hole at 11 1/2" or 25 3/8" Pine Bed Wood with Hidden Holes Short Stepside... $310 set HM HM HM HM HM HM HM HM HM HM HM HM HM SHORT STEP CHEVY SHORT STEP CHEVY 39 SHORT STEP CHEVY SHORT STEP CHEVY 46 SHORT STEP CHEVY SHORT STEP SHORT STEP st SHORT STEP 55-2nd-59 SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $327set HM 36 LONG STEP C 1/2 Ton HM LONG STEP C 1/2 Ton HM LONG STEP CHEVY HM 46 LONG STEP CHEVY HM LONG 1/2 Ton C HM LONG STEP 3/4 Ton HM LONG 1/2 Ton C HM LONG STEP 3/4 Ton HM st LONG 1/2 Ton C HM st LONG 3/4 Ton HM 55-2nd-57 LONG STEP 89" HM LONG STEP 97" HM LONG STEP HM LONG STEP HM LONG STEP HM LONG STEP /8" HM-A LONG STEP /16" 2nd mtg hole at 14 1/8" or 28 1/16" Short Fleetside... $368 set HM SHORT WIDE HM SHORT WIDE HM SHORT WIDE HM SHORT WIDE Long Fleetside... $380 set HM LONG WIDE HM LONG WIDE HM LONG WIDE HM LONG WIDE HM LONG WIDE /2" HM-A LONG WIDE /8" 2nd mtg hole at 11 1/2" or 25 3/8" Aluminum Bed Strips with Fasteners Short Stepside Sets SHORT STEP CHEVY $ SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside Sets LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP CHEVY LONG STEP CHEVY LONG STEP LONG STEP ST LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Short Fleetside Sets SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Sets LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. BED BOLT KITS FOR BED-TO-FRAME AND SIDES, SEE PAGE TO ORDER CALL FAX

29 CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Polished Stainless Bed Strips with Fasteners Short Stepside... $47.00 ea HB HB HB HB HB HB HB HB HB HB HB SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY 46 SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Unpolished Stainless Bed Strips with Fasteners Short Stepside... $41.50 ea HB HB HB HB HB HB HB HB HB HB HB SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY 46 SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP MAR K Steel Bed Strips with Fasteners Short Stepside...$34.50 ea HB HB HB HB HB HB HB HB HB HB HB "NO BOLTS" BED SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP CHEVY 46 SHORT STEP CHEVY SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP SHORT STEP Long Stepside... $52.00 ea HB LONG STEP C HB LONG STEP C HB LONG STEP CHEVY HB LONG STEP CHEVY HB 46 LONG STEP CHEVY HB LONG STEP HB LONG STEP HB ST LONG STEP HB 55 2nd-57 LONG STEP 89" HB LONG STEP 97" HB LONG STEP HB LONG STEP HB LONG STEP HB LONG STEP 1 Ton Stepside... $52.00 ea HB STEPSIDE 107" HB STEPSIDE 107 1/4" Long Stepside... $46.50 ea HB LONG STEP C HB LONG STEP C HB LONG STEP CHEVY HB LONG STEP CHEVY HB 46 LONG STEP CHEVY HB LONG STEP HB LONG STEP HB ST LONG STEP HB 55 2nd-57 LONG STEP 89" HB LONG STEP 97" HB LONG STEP HB LONG STEP HB LONG STEP HB LONG STEP 1 Ton Stepside... $46.50 ea HB STEPSIDE 107" HB STEPSIDE 107 1/4" Long Stepside...$39.50 ea HB LONG STEP C HB LONG STEP C HB LONG STEP CHEVY HB LONG STEP CHEVY HB 46 LONG STEP CHEVY HB LONG STEP HB LONG STEP HB ST LONG STEP HB 55 2nd-57 LONG STEP 89" HB LONG STEP 97" HB LONG STEP HB LONG STEP HB LONG STEP HB LONG STEP 1 Ton Stepside...$39.50 ea HB STEPSIDE 107" HB STEPSIDE 107 1/4" Panel Truck/Canopy Express HB /2 TON 82"... $ set HB /2 TON 79.5" ea Short Fleetside Sets HB SHORT WIDE... $ HB SHORT WIDE... $ HB SHORT WIDE... $ Long Fleetside Sets HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ Panel Truck/Canopy Express HB /2 TON 82"... $ set HB /2 TON 79.5" ea Short Fleetside Sets HB SHORT WIDE... $ HB SHORT WIDE... $ HB SHORT WIDE... $ Long Fleetside Sets HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ Panel Truck/Canopy Express HB /2 TON 82"... $ set HB /2 TON 79.5" ea Short Fleetside Sets HB SHORT WIDE... $ HB SHORT WIDE... $ HB SHORT WIDE... $ Long Fleetside Sets HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ HB LONG WIDE... $ Longhorn Sets HB LONGHORN... $ CORRECT NUMBER OF BED STRIP BOLTS ARE INCLUDED FOR YOUR YEAR SERIES. Longhorn Sets HB LONGHORN... $ CORRECT NUMBER OF BED STRIP BOLTS ARE INCLUDED FOR YOUR YEAR SERIES. Longhorn Sets HB LONGHORN... $ CORRECT NUMBER OF BED STRIP BOLTS ARE INCLUDED FOR YOUR YEAR SERIES. Steel must be painted to prevent rusting. TO ORDER CALL FAX

30 /DODGE "NO BOLTS" BED Oak Bed Wood with Hidden Holes Short Flareside... $365 set HM HM HM HM SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Short Flareside... $388 set HM SHORT FLARE HM SHORT FLARE Long Flareside... $480 set HM LONG FLARE HM LONG FLARE 39" HM-A LONG FLARE 40 1/8" 2nd mtg hole at 39" or 40 1/8" HM LONG FLARE Long Flareside... $497 set HM LONG FLARE Flareside is same as Stepside DODGE Short Stepside... $430 set HM SHORT 78" x 49" HM SHORT 76" x 49" Long Stepside... $462 set HM LONG 90" x 49" Long Stepside... $497 set HM LONG 90" x 54" HM LONG 88" x 54" HM 65 2nd-71 LONG 94" x 54" Pine Bed Wood with Hidden Holes Short Flareside... $330 set HM HM HM HM SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Short Flareside... $345 set HM SHORT FLARE HM SHORT FLARE Flareside is same as Stepside DODGE Short Stepside... $328 set HM SHORT STEP 78" x 49" HM SHORT 76" x 49" Long Stepside... $355 set HM LONG 90" x 49" Aluminum Bed Strips with Fasteners Short Flareside Sets SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE Short Flareside Sets SHORT FLARE... $ Long Flareside Sets LONG FLARE... $ LONG FLARE LONG FLARE LONG FLARE LONG FLARE CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Flareside is same as Stepside DODGE Short Stepside Sets SHORT 78"... $ SHORT 78" SHORT 76" SHORT 76" st SHORT 76" nd-85 SHORT 76" Long Stepside Sets LONG STEP 90"... $ LONG STEP 90" LONG STEP 88" LONG STEP 88" st LONG STEP 88" nd-85 LONG STEP 94" Power Wagon... $502 set HM /4" x 54" HM /4" x 54" HM /4" x 54" Power Wagon Sets /4"... $ /4" CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. BED BOLT KITS FOR BED-TO-FRAME AND SIDES, SEE PAGE TO ORDER CALL FAX

31 Polished Stainless Bed Strips with Fasteners Short Flareside... $47.00 ea HB HB HB HB HB HB MODEL A SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Unpolished Stainless Bed Strips with Fasteners Short Flareside... $41.50 ea HB HB HB HB HB HB MODEL A SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Steel Bed Strips with Fasteners Short Flareside... $34.50 ea HB HB HB HB HB HB MAR K /DODGE "NO BOLTS" BED MODEL A SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside... $52.00 ea HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Flareside is same as Stepside Long Flareside... $46.50 ea HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Flareside is same as Stepside Long Flareside... $39.50 ea HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE HB LONG FLARE CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Flareside is same as Stepside DODGE Short Stepside... $47.00 ea HB SHORT 78" HB SHORT 78" HB SHORT 76" HB SHORT 76" HB st SHORT 76" HB 65-2nd-85 SHORT 76" DODGE Short Stepside... $41.50 ea HB SHORT 78" HB SHORT 78" HB SHORT 76" HB SHORT 76" HB st SHORT 76" HB 65-2nd-85 SHORT 76" DODGE Short Stepside... $34.50 ea HB SHORT 78" HB SHORT 78" HB SHORT 76" HB SHORT 76" HB st SHORT 76" HB 65-2nd-85 SHORT 76" Long Stepside... $52.00 ea HB LONG STEP 90" HB LONG STEP 90" HB LONG STEP 88" HB LONG STEP 88" HB st LONG STEP 88" HB 65-2nd-85 LONG STEP 94" Power Wagon... $52.00 ea HB /4" HB /4" Long Stepside... $46.50 ea HB LONG STEP 90" HB LONG STEP 90" HB LONG STEP 88" HB LONG STEP 88" HB st LONG STEP 88" HB 65-2nd-85 LONG STEP 94" Power Wagon...$46.50 ea HB /4" HB /4" Long Stepside... $39.50 ea HB LONG STEP 90" HB LONG STEP 90" HB LONG STEP 88" HB LONG STEP 88" HB st LONG STEP 88" HB 65-2nd-85 LONG STEP 94" Power Wagon... $39.50 ea HB /4" HB /4" CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. CORRECT NUMBER OF FASTENERS ARE INCLUDED FOR YOUR YEAR SERIES. Steel must be painted to prevent rusting. BED BOLT KITS FOR BED-TO-FRAME AND SIDES, SEE PAGE 32. TO ORDER CALL FAX

32 "NO BOLTS" BED BOLT KITS Bed-to-Frame/Sides Polished Short Stepside Kits SHORT STEP CHEVY.. $ SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP THESE BOLT KITS ARE MADE TO USE WITH MAR-K'S BED WOOD WITH HIDDEN HOLES AND BED STRIPS WITH HIDDEN FASTENERS. SEE PAGES 25 OR 26 FOR INFORMATION ON HOW TO PREVENT GALLING ON STAINLESS FASTENERS. Bed-to-Frame/Sides Unpolished Short Stepside Kits SHORT STEP CHEVY.. $ SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP Bed-to-Frame/Sides Zinc Plated Short Stepside Kits SHORT STEP CHEVY.. $ SHORT STEP CHEVY SHORT STEP CHEVY SHORT STEP st SHORT STEP nd-59 SHORT STEP CAMEO/SUBURBAN SHORT STEP SHORT STEP SHORT STEP Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside Kits LONG FLARE... $ LONG FLARE (Flareside is same as Stepside) DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" Long Stepside Kits LONG 90"... $ LONG 88" x 54" Power Wagon Kits /4" x 54"... $ /4" x 54" Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside Kits LONG FLARE... $ LONG FLARE (Flareside is same as Stepside) DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" Long Stepside Kits LONG 90"... $ LONG 88"x 54" Power Wagon Kits /4" x 54"... $ /4" x 54" Long Stepside Kits LONG STEP C... $ LONG STEP C LONG STEP CHEVY LONG STEP st LONG STEP nd-57 LONG STEP 89" LONG STEP 97" LONG STEP LONG STEP LONG STEP LONG STEP Short Fleetside Kits SHORT WIDE... $ SHORT WIDE SHORT WIDE Long Fleetside Kits LONG WIDE... $ LONG WIDE LONG WIDE LONG WIDE LONG WIDE Short Flareside Kits SHORT FLARE... $ SHORT FLARE SHORT FLARE SHORT FLARE Long Flareside Kits LONG FLARE... $ LONG FLARE (Flareside is same as Stepside) DODGE Short Stepside Kits SHORT 78" x 49"... $ SHORT 76" x 49" Long Stepside Kits LONG 90"... $ LONG 88"x 54" Power Wagon Kits /4" x 54"... $ /4" x 54" TO ORDER CALL FAX

33 53-72 MAR K RESTORATION ITEMS BED ASSEMBLY INSTRUCTIONS Instructions written by MAR-K engineers. Instructions included free with your restoration parts or purchased separately. Short Stepside... $10 ea INST34CHEVSS CHEVY SHORT INST37CHEVSS CHEVY SHORT INST40CHEVSS 40 CHEVY SHORT INST41CHEVSS CHEVY SHORT INST47SS SHORT INST54SS ST SHORT INST55SS 55 2ND-59 SHORT INST55CAMEO CAMEO/SUBURBAN INST60SS SHORT INST63SS SHORT INST67SS SHORT INST73SS SHORT Long Stepside... $10 ea INST37CLS C LONG INST37CHEVLS CHEVY LONG INST41CHEVLS CHEVY LONG INST47LS LONG INST54LS ST LONG INST55LS 55 2ND-57 LONG INST57LS LONG INST60LS LONG INST63LS LONG INST67LS LONG INST73LS LONG 1 Ton Stepside... $10 ea INST471TON TON INST551TON TON Short Fleetside... $10 ea INST58SF FLEET INST60SF FLEET INST63SF FLEET INST67SF FLEET Long Fleetside... $10 ea INST58LF FLEET INST60LF FLEET INST63LF FLEET INST67LF FLEET INST69LH LONGHORN Wood Bed Conversion... $10 ea INST67CONV SHORT FLEET* INST67LFCONV LONG FLEET* *disassembly and assembly instructions. Flareside (Stepside)... $10 ea INST51FSS SHORT INST53FSS SHORT INST61FSS SHORT INST65FSS SHORT INST73FSS SHORT INST80FSS SHORT DODGE Stepside... $10 ea INST72DGSS DODGE SHORT BED WOOD SILLS The bed wood sill caps off the exposed ends of the bed wood on Ford Short Bed Flareside (Stepside) trucks. MAR-K makes bed wood kits for these years with a special indention so the bed wood sill lays flush with the wood and backs up to the bed strips, just like the original. These are also available without holes for custom applications. MAR-K also makes Ford Short Bed Flareside bed wood sills just like the original with their unique "U" shape. Both bed wood sills provide protection, as well as a nice appearance for the finishing touch of your Ford bed. Holes are predrilled, and bolts needed are included in your bed bolt kit Short Flare with holes POLISHED STAINLESS... $44.00 ea UNPOLISHED STAINLESS ea STEEL ea Short Flare with holes POLISHED STAINLESS... $38.00 ea UNPOLISHED STAINLESS ea STEEL ea Short Flare no holes 49" POLISHED STAINLESS... $31.50 ea UNPOLISHED STAINLESS ea STEEL ea Universal (L-style) no holes 72" POLISHED STAINLESS... $40.00 ea UNPOLISHED STAINLESS ea STEEL ea BED SIDE WOOD FLOOR SEAL* The Box Side Wood Floor Seal for Ford Flareside trucks is a black rubber seal made to fit between the bed side flange and the wood floor on each side Short Flareside BEDSIDE WOOD FLR SEAL $22.00 pr TAILGATE BUMPER* Made of black rubber, the Ford Tailgate Bumper fits into the ends of the tailgate for Ford Flaresides Flareside TAILGATE BUMPER... $4.00 pr FENDER WELT This piece of vinyl-like material fits between the fender and the bed side on Stepside trucks. It keeps the metals from scraping, and provides a seal around the fender to prevent moisture from coming through. One 30' roll is enough to do rear and front fenders. The fender welt is 1-3/4" wide with a 1/4" bead and 1/16" thick. Front and Rear Fenders... $27.50 ea ' Roll Front Fenders... $14.00 pr UNIVERSAL 60" DOOR HINGE REPAIR PANEL Available for MAR-K makes the door hinge repair panel from 16 gage electro-galvanized steel. The lower door hinge post is often the victim of rust. After the rusted panel is removed, this repair panel welds in place. The panel includes the "cage nuts" that are tightened after the door is secure in place. The look and fit is like new DRIVER SIDE... $38.50 kit PASSENGER SIDE kit CAGE NUT REPLACEMENT ea *Ford Tailgate Bumper and Bed Side Wood Floor Seal are both purchased from an outside vendor. TO ORDER CALL FAX

34 HARDWARE PIECES All MAR-K bolts come with nut and lockwasher and all hardware pieces are priced by the piece (each) unless otherwise noted. CARRIAGE BOLT A smooth head and square shoulder; used in bed strips, bolted through square holes. Polished Stainless /4-20 x 3/4"... $ /4-20 x 1 1/4" /4-20 x 1 1/2" /4-20 x 2" /4-20 x 2 1/2" /16-18 x 3/4" /16-18 x 1 1/2" /16-24 x 1 1/2" FINE /16-18 x 2" /16-18 x 3" /16-18 x 4" /8-16 x 4" /8-16 x 5" /8-16 x 6" /8-16 x 8 1/2" /8-16 x 10" /8-16 x 12" /2-13 x 4 1/2" /2-13 x 6" /2-13 x 10 1/2" Unpolished Stainless /4-20 x 3/4"... $ /4-20 x 1 1/4" /4-20 x 1 1/2" /4-20 x 2" /4-20 x 2 1/2" /16-18 x 3/4" /16-18 x 1 1/2" /16-24 x 1 1/2 FINE /16-18 x 2" /16-18 x 3" /16-18 x 4" /8-16 x 4" /8-16 x 5" /8-16 x 6" /8-16 x 8 1/2" /8-16 x 10" /8-16 x 12" /2-13 x 4 1/2" /2-13 x 6" /2-13 x 10 1/2" Zinc Plated /4-20 x 3/4"... $ /4-20 x 1 1/4" /4-20 x 2 1/2" /16-18 x 3/4" /16-18 x 1 1/2" /16-18 x 3" /8-16 x 4" /8-16 x 5" /8-16 x 6" /8-16 x 8 1/2" /8-16 x 10" /8-16 x 12" /2-13 x 4 1/2" /2-13 x 6" /2-13 x 10 1/2" RIBBED NECK BOLT Like the carriage bolt, the ribbed neck bolt has a smooth head; however, it gets its name from the "ribbed" shoulder which allows it to be bolted through a round hole. Polished Stainless /4-20 x 1 1/4"... $ /16-18 x 1 1/2" Unpolished Stainless /4-20 x 1 1/4"... $ /16-18 x 1 1/2" Zinc Plated /4-20 x 1 1/4"... $ /16-18 x 1 1/2" SQUARE DRIVE BOLT Used in early Ford Flareside wood beds. The flat head bolt is used through bed-to-frame washers in wood. The Dome head bolt is used in the bed strip holes that bolt through the frame. 7/16 x 3 3/4" Zinc Plated DOME HEAD... $ FLAT HEAD PHILLIPS FENDER BOLT Made to bolt the fenders to the bed side on stepside trucks. The phillips fender bolts may also be used to attach a replacement angle strip to the bed side where it was originally welded on Stepsides. 5/16 x 3/4" POLISHED... $ UNPOLISHED ZINC PLATED /16 x 1" POLISHED... $ UNPOLISHED PHILLIPS BED TO FRAME Used on Ford truck beds to bolt the wood and strips to the frame. The oval head fits into the bed-to-frame washer, and the dome head bolt fits through the metal bed strip for mounting. Polished Stainless /2 x 5" DOME... $ /2 x 5" OVAL Unpolished Stainless /2 x 5" DOME... $ /2 x 5" OVAL BED-TO-FRAME WASHER These washers are placed in the countersunk wood holes for the bed-to-frame bolt to pass through. The hole in the washer is square and offset in washers, round and centered for Ford. For Dodge washers, see "Hard to Find Hardware Pieces for Dodge Pickups" on page 35. Polished Stainless /2 x 3/8" SQUARE HOLE OFFSET ()... $ /8 x 1/2" ROUND HOLE CENTER () /8 x 1/2" SQUARE HOLE OFFSET () Unpolished Stainless /2 x 3/8" SQUARE HOLE OFFSET ()... $ /8 x 1/2" ROUND HOLE CENTER () /8 x 1/2" SQUARE HOLE OFFSET () Zinc Plated /2 x 3/8" SQUARE HOLE OFFSET ()... $ /8 x 1/2" ROUND HOLE CENTER () /8 x 1/2" SQUARE HOLE OFFSET () Other Hardware Pieces and Bolt Kits not listed on this page: Bed Bolt Kits - Standard Wood and Strips... See pages Bed Bolt Kits - "No Bolts" Wood and Strips... See page 32 Fender Bolt Kits for Rear Fenders... See page 26 Front Bed Panel Mounting Bolt Kits... See page 36 Rear Cross Sill Mounting Bolt Kits... See page 40 Tailgate Hinges and Trunnions... See page 51 Tailgate Chain Parts... See page TO ORDER CALL FAX

35 SEE PAGES 25 OR 26 FOR INFORMATION ON HOW TO PREVENT GALLING ON STAINLESS FASTENERS. MAR K HARDWARE PIECES STEP BOLT Used to bolt the step to the support brace. They are available in zinc plated steel. The original size is 1/4 x 3/4. Also available in 5/16 x 3/ /4-20 x 3/4"... $ /16-18 x 3/4" HEX HEAD SCREW This screw has a hexagon shaped head. Used in bolting the rear cross sill to the bed sides, or in bolting the front bed panel to the bed sides. 1/4-20 x 5/8" POLISHED... $ UNPOLISHED ZINC PLATED HARD TO FIND HARDWARE PIECES FOR DODGE PICKUPS CLUTCH HEAD BOLT Available in zinc plated only, this 3/4" bolt is used to bolt the fender to the bed side on stepside trucks. Notice the shape of the drive. This is the original fender bolt for early stepsides /16 x 3/4"... $2.10 ACORN NUT Acorn nut makes a decorative finish on a bolt that is exposed as well as protection of the thread from the elements. Use when bolting angle strips to bed side as an alternative to welding. Phillips screw sold separately /16" POLISHED... $ /16" UNPOLISHED /16" ZINC PLATED SCREW AND CAPPED NUT 1/4-20 x 5/8" Stainless screw and plated steel nut with stainless cap for "Red Express" trim boards. Complete trim board kits, see page POLISHED... $ UNPOLISHED Dodge Style MAR-K design PHILLIPS FENDER BOLT DODGE STYLE 5/16 x 1" Phillips bolts with 1" diameter head. (top left) Includes nut and 1" washer. Mounts fenders to the bed sides ZINC PLATED... $7.00 MAR-K DESIGN 5/16 x 1" Phillips bolts with 1" diameter countersunk washer. (top right) Includes nut and 1" washer. Mounts fenders to the bed sides POLISHED... $ UNPOLISHED ZINC PLATED Fender bolt kits, see page 26. BED-TO-FRAME WASHER 3" Diameter washer (left) used for bed-to-frame mounting before 1953 model year POLISHED... $ UNPOLISHED ZINC PLATED /8" Diameter washer (right) with 1/2" square hole in center. For bed-to-frame mounting Step, Long Step and Power Wagon POLISHED... $ UNPOLISHED ZINC PLATED HEX HEAD SCREW 5/16-18 x 3/4" Hex head screw and nut with washer. Attaches front bed panel to the bed sides POLISHED... $ UNPOLISHED ZINC PLATED FLAT HEAD SCREW 5/16-18 x 5/8" Phillips stainless flat head screw. Attaches center tailgate hinge to rear sill. Two (2) required POLISHED... $ UNPOLISHED BED-TO-FRAME WASHER 1 1/2" Diameter washer (left) with 1/2" square hole offset POLISHED... $ UNPOLISHED ZINC PLATED /2" Diameter washer (right) with 3/8" square hole offset. Used for bed-to-frame mounting for stepsides POLISHED... $ UNPOLISHED ZINC PLATED FENDER WASHER 1 7/16 x 1 x 1/8" Rectangular washer used with fender mounting bolt and nut. For replacement only ZINC PLATED... $1.05 LONG THREADED ROD 5/16" Diameter rod 55 1/2" long threaded each end for mounting front bed panel to bed sides. Includes nuts and washers. High-side bed only STEEL 54"... $ STEEL 49"... $12.00 INDENTED HEX WASHER HEAD BOLT This bolt is used in several instances, most often in bolting the front bed panel to the bed side, as well as bolting the rear cross sill to the bed. 5/16 x 3/4" POLISHED... $ UNPOLISHED ZINC PLATED T-BOLT FASTENER FOR HIDDEN BOLTS BED STRIPS Use with hidden bolts bed strips for replacement or custom T-Bolt 1 1/4"... $ T-Bolt 2" TO ORDER CALL FAX

36 FRONT BED PANELS MAR-K front bed panels are made on this machine that shapes the curl for a Custom built tools like this help us to make our parts accuately and efficiently. FRONT PANEL MOUNTING BOLT KITS Mounting bolt kits, containing the bolts for mounting the front bed panel to the bed sides, are available for, Ford and Dodge trucks. These may be 1/4" hex head bolts or 5/16" indented hex head bolts, according to year series. The kit for steel floors uses some 5/16" carriage bolts also. The bolts which mount the front bed panel to the bed strips are not in this kit. They are included in the bed bolt kit. Front Bed Panel Mounting Bolts (34-53 mounting bolts kits are for replacement only. Included when ordering MAR-K front bed panels.) CHEVY/34-38 C POLISHED... $16.50 kit CHEVY/34-38 C UNPOLISHED kit CHEVY/34-38 C ZINC PLATED kit STEEL CHEV/34-38 C LONG THREAD ROD ea STEEL CHEVY LONG THREADED ROD ea STEPSIDE POLISHED kit STEPSIDE UNPOLISHED kit STEPSIDE ZINC PLATED kit TON ZINC PLATED kit STEEL LONG THREADED ROD ea STEPSIDE/FLEETSIDE POLISHED... $11.00 kit STEPSIDE/FLEETSIDE UNPOLISHED kit STEPSIDE/FLEETSIDE ZINC PLATED kit FLEETSIDE (STEEL FLOOR) POLISHED kit FLEETSIDE (STEEL FLOOR) UNPOLISHED kit FLEETSIDE (STEEL FLOOR) ZINC PLATED kit Front Bed Panel Mounting Bolts SHORT FLARESIDE POLISHED... $ 5.50 kit SHORT FLARESIDE UNPOLISHED kit SHORT FLARESIDE ZINC PLATED kit SHORT FLARE/53-79 LONG FLARE POL kit SHORT FLARE/53-79 LONG FLARE UNPOL kit SHORT FLARE/53-79 LONG FLARE ZINC kit DODGE Front Bed Panel Mounting Bolts - HIGHSIDE ONLY SHORT STEP/48-85 LONG STEP POLISHED.. $11.00 kit SHORT STEP/48-85 LONG STEP UNPOL kit SHORT STEP/48-85 LONG STEP ZINC kit SHORT 49" STEEL THREADED ROD ea SHORT/48-85 LONG STEEL THREADED ROD ea FRONT BED PANELS This front portion of the pickup is embossed or smooth like the original and comes with holes for mounting to the bed sides. MAR-K front bed panels are manufactured from 16 gage electro-galvanized steel in Oklahoma City, USA. The front bed panels come with zinc plated steel hardware and a long threaded rod for mounting. The 54-87, Ford and Dodge front panel mounting kits are sold separately, with options of polished stainless, unpolished stainless or zinc plated steel bolts. Tech Tip: The front bed panel is attached to the bed sides and the bed floor. There are some differences in how they bolt to the floors. For instance, the front bed panel bolts to the bed wood, the front bed panel bolts to the front cross sill, and the and early Ford front panels bolt to the bed strips. All Ford front bed panels bolt to the front cross sill. The Dodge front bed panel mounts to the bed strips STEPSIDE Stepside STEPSIDE (WITH HARDWARE) *... $ ea STEPSIDE CHEVY (WITH HARDWARE) ea STEPSIDE CHEVY (WITH HARDWARE) ea STEPSIDE (WITH HARDWARE) ea TON (WITH HARDWARE) ea TON (WITH HARDWARE) ea STEPSIDE ea STEPSIDE ea STEPSIDE ea *Front bed panels and threaded rod for will NOT fit a 39 C FLEETSIDE FLEETSIDE FLEETSIDE... $ ea FLEETSIDE ea FLEETSIDE (WOOD FLOOR) ea FLEETSIDE (STEEL FLOOR) ea 36 TO ORDER CALL FAX

37 FRONT BED PANELS STEPSIDE LOUVRES - BOWTIE FLARESIDE The Ford Flareside front bed panel is also available in a custom version with pointed ends that meet at the top of the bed side. To order this custom panel, use # SHORT AND LONG FLARESIDE FLARESIDE (STEPSIDE) SHORT FLARESIDE... $ ea SHORT FLARESIDE CUSTOM* ea *WITH POINTED ENDS AT TOP OF THE BED SIDE SHORT/53-79 LONG ea DODGE 54" HIGHSIDE STEPSIDE Front bed panel with embossment is available for the 54" and 49" wide stepside beds. *# will also fit Power Wagons. DODGE HIGHSIDE UTILINE (STEPSIDE) SHORT 49" WIDE BED... $ ea LONG 54" WIDE BED ea SHORT 49" WIDE BED ea SHORT/53-85 LONG 54" WIDE BED* ea FRONT BED PANEL FLANGES Repair Flange: This angle may be used to repair the rusted areas along the front bed panel where it meets the floor of the bed Adapter Flange: If you are converting from a steel floor to a wood floor you may need an adapter flange. This is used with the original front bed panel for conversions since the wood floor front bed panel is taller than the panel for the steel floor. This part is welded on the existing panel. If you are buying a new front bed panel from MAR-K for your wood floor, you would not need the adapter flange. This can also be used to repair rusted panels. Coverage area is 71 7/8" X 1 1/8" (not including overlap) SHORT FLARESIDE (STEPSIDE)... $30.00 ea FLEETSIDE ea CUSTOM FRONT BED PANELS SMOOTH, LOUVRES, EMBOSSED BOWTIE MAR-K has developed custom front bed panels for your truck. Custom front panels may be louvered to match your tailgate or left smooth for painting graphics. Also available are front panels embossed with the Chevy bowtie emblem. All our embossed bowtie front bed panels are Official Licensed Products supplied by MAR-K Specialized Mfg., an authorized General Motors Licensee. Get the latest look today. Don't forget the matching tailgate for a truly custom look. Installation hardware sold separately. See page 36. Stepside LOUVRES - BOWTIE *... $ ea EMBOSSED BOWTIE * ea CHEVY LOUVRES - BOWTIE ea CHEVY EMBOSSED BOWTIE ea CHEVY LOUVRES - BOWTIE ea CHEVY EMBOSSED BOWTIE ea LOUVRES - BOWTIE ea EMBOSSED BOWTIE ea SMOOTH ea LOUVRES - 4 ROW ea LOUVRES - 7 ROW ea LOUVRES - BOWTIE ea EMBOSSED BOWTIE ea SMOOTH ea LOUVRES - 4 ROW ea LOUVRES - 7 ROW ea LOUVRES - BOWTIE ea EMBOSSED BOWTIE ea SMOOTH ea LOUVRES - 4 ROW ea LOUVRES - 7 ROW ea LOUVRES - BOWTIE ea EMBOSSED BOWTIE ea *Front bed panels for will NOT fit a 39 C. Fleetside SMOOTH... $ ea EMBOSSED BOWTIE ea SMOOTH ea LOUVRES - BOWTIE ea EMBOSSED BOWTIE ea SMOOTH (WOOD FLOOR) ea SMOOTH (STEEL FLOOR) ea EMBOSSED BOWTIE (WOOD FLOOR) ea EMBOSSED BOWTIE (STEEL FLOOR) ea TO ORDER CALL FAX

38 CROSS SILLS - CROSS SILLS CHEVY/C Short Bed Stepside - Steel Year (Quantity/Truck) CHEVY CROSS SILLS (2) FRONT & SECOND $25.00 ea CHEVY CROSS SILLS (1) THIRD ea CHEVY CROSS SILLS (3) ea CHEVY CROSS SILLS (3) ea CHEVY CROSS SILLS (3) ea CROSS SILL W/FUEL TANK NOTCH (1) SECOND25.00 ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea ST CROSS SILLS (3) ea ND-59 CROSS SILLS (2) ea ND-59 CROSS SILL (1) THIRD ea These heavy gage steel parts made by MAR-K are mounted perpendicular to the wood bed and the frame for support. Holes are located in the cross sill according to the year series, which determines the placement of bed strips and wood. The bed strips are bolted to the cross sill by the bed strip bolts; and, the wood is bolted to the frame through the cross sill by the bed-to-frame bolts. Cross sills are sold with holes and brackets. Brackets may need to be welded for some trucks. Bed mounting blocks and pads may be needed. See page 40. Made by MAR-K in Oklahoma City, USA. Short Bed Stepside - Stainless Year (Quantity/Truck) CHEVY CROSS SILLS (3)... $60.00 ea CHEVY CROSS SILLS (3) ea CHEVY CROSS SILLS (3) ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea ST CROSS SILLS (3) ea ND-59 CROSS SILLS (3) * ea *Third cross sill not available in stainless. The 55-2nd -to-59 model Chevy short stepside beds originally had a third (3rd) cross sill different than the others. The outer end of this sill is formed upward to provide clearance under the sill and outward from the frame. Your truck suspension may or may not require this sill. This special cross sill is not available in stainless. You can purchase this in steel or purchase 3 sills alike in stainless # CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (3) ea REINFORCEMENT STRIP (1) ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea Long Bed Stepside - Steel Year (Quantity/Truck) CROSS SILLS (4)... $25.00 ea CHEVY/37-38 C CROSS SILLS (4) ea CHEVY CROSS SILLS (4) ea CHEVY CROSS SILLS (3) ea CHEVY CROSS SILL (1) SECOND ea CHEVY CROSS SILLS (3) ea CHEVY CROSS SILL (1) SECOND ea CROSS SILL (1) FRONT ea CROSS SILL (1) SECOND ea CROSS SILLS (3) CENTER ea CROSS SILL (1) FRONT ea CROSS SILL (1) SECOND ea CROSS SILLS (3) CENTER ea ST CROSS SILLS (4) ea ND-57 CROSS SILLS (3) 89" BED ea ND-57 REINFORCEMENT STRIPS (2) ea CROSS SILLS (4) 97" BED ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea 1 Ton Stepside - Steel Year (Quantity/Truck) CROSS SILLS (4)... $90.00 ea CROSS SILLS (4) ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (3) ea REINFORCEMENT STRIP (1) ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (2) ea Long Bed Stepside - Stainless Year (Quantity/Truck) CHEVY/37-38 C CROSS SILLS (4)... $60.00 ea CHEVY CROSS SILLS (4) ea CHEVY CROSS SILLS (4) * ea *Second cross sill not available in stainless CHEVY CROSS SILLS (4) * ea *Second cross sill not available in stainless CROSS SILL (1) FRONT ea CROSS SILLS (4) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (4) CENTER ea ST CROSS SILLS (4) ea ND-57 CROSS SILLS (3) 89" BED ea ND-57 REINFORCEMENT STRIPS (2) ea CROSS SILLS (4) 97" BED ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (2) ea 1 Ton cross sills not available in stainless. Tech Tip: 51 Stepsides - These trucks had an early model 51 with 9 boards and 8 bed strips and a late model with 8 boards and 7 bed strips. The hole pattern is different and will not line up correctly if you have the wrong sill. 38 TO ORDER CALL FAX

39 CROSS SILLS IN STAINLESS! MAR-K makes these 14 gage, type 430 stainless cross sills with the same strength as original, only the stainless provides extra protection from rust and corrosion. The sills are shipped with a vinyl covering to protect the surface until the cross sill is installed. Stainless cross sills are available for most wood floor trucks. Reinforcement strips are also available in stainless! Made in Oklahoma City, USA. REINFORCEMENT STRIPS - Like a cross sill, these steel pieces are placed MAR K CROSS SILLS CHEVY/C perpendicular to the strips and wood for support. The difference from the cross sills is that the reinforcement strips are shorter in height and "reinforce" the bed, but do not attach to the frame. They are bolted to the wood and bed strips, angles or bed side flanges on wood floor trucks, and welded to the steel floor only on steel floor trucks. MAR-K reinforcement strips are made in Oklahoma City, USA. Short Bed Fleetside Wood Floor - Steel Year (Quantity/Truck) CROSS SILLS (3)... $30.00 ea REINFORCEMENT STRIPS (1) 49.5" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (1) 72" ea Long Bed Fleetside Wood Floor - Steel Year (Quantity/Truck) CROSS SILLS (5)... $30.00 ea REINFORCEMENT STRIPS (2) 49.5" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (1) 72" ea Longhorn Fleetside Wood Floor - Steel Year (Quantity/Truck) CROSS SILLS (5)... $30.00 ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (2) 72" ea Short Bed Fleetside Wood Floor - Stainless Year (Quantity/Truck) CROSS SILLS (3)... $70.00 ea REINFORCEMENT STRIPS (1) 49.5" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (3) ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (1) 72" ea Long Bed Fleetside Wood Floor - Stainless Year (Quantity/Truck) CROSS SILLS (5)... $70.00 ea REINFORCEMENT STRIPS (2) 49.5" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 72" ea CROSS SILLS (5) ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (1) 72" ea Longhorn Fleetside Wood Floor - Stainless Year (Quantity/Truck) CROSS SILLS (5)... $70.00 ea REINFORCEMENT STRIPS (1) 49.5" ea REINFORCEMENT STRIPS (2) 72" ea Short Bed Fleetside Steel Floor - Steel Year (Quantity/Truck) CROSS SILLS (1) FRONT... $50.00 ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea REINFORCEMENT STRIPS (1) 72" ea REINFORCEMENT STRIPS (1) 49.75" ea Long Bed Fleetside Steel Floor - Steel Year (Quantity/Truck) CROSS SILLS (1) FRONT... $50.00 ea CROSS SILLS (1) #2 and #5/NO HOLES ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea FLEETSIDE STEEL FLOOR REINFORCEMENT STRIPS (1) 72" ea REINFORCEMENT STRIPS (1) 49.75" ea STEEL FLOOR CROSS SILLS - MAR-K also makes cross sills for the steel floor trucks. Each sill is specially designed to fit like original, including size, shape and hole pattern. The mounting bolt bracket is welded in place like original. Made of 14 gage electro-galvanized steel in Oklahoma City, USA. TO ORDER CALL FAX

40 CROSS SILLS /DODGE BED MOUNTING BLOCKS AND MOUNTING PADS The pre-drilled bed mounting blocks are used as spacers between the cross sills and the frame. Bed mounting pads are rectangular neoprene pads used in many truck beds for padding between the cross sill bracket and the frame. The pads are also placed between the rear sill bracket and the frame. Mounting Blocks and/or Mounting Pads: SHORT (BLOCKS & PADS) CHEVY. $19.50 set SHORT (BLOCKS & PADS) CHEVY set SHORT (BLOCKS & PADS) CHEVY set LONG (BLOCKS & PADS) CHEVY set SHORT (BLOCKS & PADS) set LONG (BLOCKS & PADS) set TON (BLOCKS & PADS) set CENTER CROSS SILL BLOCKS set FRONT CROSS SILL BLOCKS set #2 CROSS SILL BLOCKS set #3 CROSS SILL BLOCKS set #3 CROSS SILL BLOCKS set #4 CROSS SILL BLOCKS set REAR SILL BLOCKS set REAR SILL BLOCKS set DODGE #4 CROSS SILL BLOCKS set PADS WITH HOLES set PADS WITH HOLES set PADS WITH HOLES set PADS WITH HOLES set FLARESIDE - FRONT, #2, #3 & #4 Short Bed Flareside - Steel Year (Quantity/Truck) CROSS SILL (1) FRONT... $45.00 ea CROSS SILLS (2) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (2) CENTER ea CROSS SILL (1) FRONT ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea CROSS SILL (1) FRONT ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea COMPLETE BLOCK KITS The pre-drilled bed mounting blocks are used as spacers in Ford wood beds between the cross sills and the frame. Wood Block Kit Complete $83.50 kit kit REAR CROSS SILL MOUNTING HARDWARE KITS Made to bolt the rear cross sill to the bed sides, the and late Ford kits use 5/16" indented hex head bolts (shown at left) and the early Ford kit uses 1/4" hex head bolts. Nuts and washers included. The bolts which mount the rear cross sill to the bed strips are not in this kit. These are in the bed bolt kit or sold separately DODGE STEPSIDE - FRONT, #2, #3 & #4 DODGE Short Bed Stepside - Steel Year (Quantity/Truck) CROSS SILL (1) FRONT... $65.00 ea CROSS SILLS (1) # ea CROSS SILLS (1) # ea CROSS SILLS (1) #4* ea *#4 includes mounting blocks Rear Cross Sill Mounting Hardware: STEPSIDE POLISHED... $15.00 kit STEPSIDE UNPOLISHED kit STEPSIDE ZINC PLATED kit STEP/FLEET POLISHED kit STEP/FLEET UNPOLISHED kit STEP/FLEET ZINC PLATED kit SHORT FLARESIDE POLISHED kit SHORT FLARESIDE UNPOLISHED kit SHORT FLARESIDE ZINC PLATED kit SHORT/53-79 LONG POLISHED kit SHORT/53-79 LONG UNPOLISHED kit SHORT/53-79 LONG ZINC PLATED kit 40 TO ORDER CALL FAX

41 REAR CROSS SILLS Stepside - This rear cross sill, as well as the and 40, does not have brackets attached for mounting to the bed wood and frame. The bed mounting blocks placed at the rear of the truck are larger and provide attachment of the wood to the frame. These blocks are sold as part of the blocks and pads kit on page Stepside - These Stepside rear sills have "brackets" welded in place. The bed-to-frame bolt passes through these brackets as it bolts from the wood to the frame. The strips and wood sit on the ledge that has pre-drilled holes for mounting. The rear cross sill protects the edges of the board. REAR CROSS SILL - The rear cross sill is located below and parallel to the tailgate. MAR K REAR CROSS SILLS It is the piece that ties the back of the bed together by being bolted crosswise from one bed side to the other. It mounts to the frame, wood, strips and bed sides. MAR-K rear cross sills come complete with all holes punched including attachment holes for wiring clamps and all bolt holes. Brackets are included to bolt on for 34-36, welded on for and riveted on for Ford rear cross sills. Rear cross sills are made in Oklahoma City, USA! Tech Tip: We recommend that you bolt the rear sill to the stake pockets first. Make sure everything is square and level before tightening the bolts; then weld the rear cross sill to the stake pockets if desired. The bed strips and wood are bolted down to the rear cross sill after the rear cross sill is in place. REAR CROSS SILLS Fleetside Wood Floor - The Fleetside rear sill also has "brackets" welded in place. The bed-to-frame bolt passes through these brackets as it bolts from the wood to the frame. The strips and wood sit on the ledge that has pre-drilled holes for their mounting. The edges of the boards are therefore protected by the rear cross sill. STEPSIDE REAR CROSS SILL... $90.00 ea STEPSIDE - 5 BED STRIPS STEPSIDE CHEVY/37-38 C- 5 BED STRIPS STEPSIDE CHEVY - 5 BED STRIPS STEPSIDE CHEVY - 5 BED STRIPS STEPSIDE CHEVY - 6 BED STRIPS STEPSIDE REAR CROSS SILL... $ ea STEPSIDE 1/2 TON - 8 BED STRIPS STEPSIDE 3/4 TON - 8 BED STRIPS STEPSIDE 1/2 TON - 7 BED STRIPS STEPSIDE 3/4 TON - 7 BED STRIPS ST STEPSIDE 1/2 TON ST STEPSIDE 3/4 TON ND-59 STEPSIDE STEPSIDE STEPSIDE STEPSIDE STEPSIDE STEPSIDE REAR CROSS SILL... $ ea STEPSIDE 1 TON - 8 BED STRIPS STEPSIDE 1 TON - 7 BED STRIPS FLEETSIDE REAR CROSS SILL (wood floor)... $ ea FLEETSIDE FLEETSIDE FLEETSIDE Ford Flareside - Ford rear sill has "brackets" riveted in place and holes for mounting strips and wood. The bed-to-frame bolt passes through these brackets as it bolts the rear sill to the frame. Notice that the strips and wood sit on top of the rear sill, thus exposing the ends of the wood. The bed wood sill is used in this case to "cap" and protect the ends of the wood. Bed wood sill sold separately. See page Ford Flareside - The later model Ford rear sill is made for six strips and seven boards. The bed-toframe bolts pass through holes in the top surface which supports the bed wood boards. This rear sill has cut out areas on the rear face to provide clearance for bumper brackets. Wood blocks must be used with this rear sill and may be ordered separately. See page 40. FLARESIDE (STEPSIDE) REAR CROSS SILL... $90.00 ea SHORT FLARESIDE FLARESIDE (STEPSIDE) REAR CROSS SILL... $ ea Wood blocks must be used with these rear sills and may be ordered separately. See page SHORT FLARESIDE SHORT FLARESIDE* *83-87 Short Flareside owners may need to drill holes for bed strips bolts if they are installing a 6 board, 5 bed strip wood kit. TO ORDER CALL FAX

42 BED SIDES MAR-K bed sides are welded on this custom resistance welder which places the welds accurately in a straight line and keeps them consistently strong and reliable. ** and Passenger side fuel hole sold as an upgrade Short Stepside with Stake Pocket Holes and Fender Holes STEPSIDE DR CHEVY ONLY - STRAIGHT.. $ ea STEPSIDE PA** CHEVY ONLY - STRAIGHT ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR ea STEPSIDE PA** ea ST STEPSIDE DR-SOLD AS PAIRS ONLY ea ST STEPSIDE PA-SOLD AS PAIRS ONLY ea ND-59 STEPSIDE DR ea ND-59 STEPSIDE PA ea CAMEO/SUBURBAN INNER PANELS SEE NEXT COLUMN STEPSIDE DR... $ ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea Short Stepside no Stake Pocket Holes with Fender Holes STEPSIDE DR CHEVY ONLY - STRAIGHT.. $ ea STEPSIDE PA** CHEVY ONLY - STRAIGHT ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR ea STEPSIDE PA** ea ST STEPSIDE DR-SOLD AS PAIRS ONLY ea ST STEPSIDE PA-SOLD AS PAIRS ONLY ea ND-59 STEPSIDE DR ea ND-59 STEPSIDE PA ea CAMEO/SUBURBAN INNER PANELS SEE NEXT COLUMN STEPSIDE DR... $ ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea COMPLETE BED SIDES - MAR-K makes quality reproduction bed sides for Stepsides and Ford Flareside pickups. We use 16 gage electro-galvanized steel to form the bed sides. MAR-K bed sides are made in Oklahoma City, USA! A complete bed side is made up of the bed side panel, the front and rear stake pockets, and the steel angle strip. A complete Ford bed side is made up of the bed side panel, the front and rear stake pockets and front and back extension panels. Sides are ready to clean, prime, paint and bolt together. We provide holes in the bed sides for fender installation. Bed sides can be ordered with or without the stake pocket hole, which is the large square hole in the top of the side above the stake pocket. Bed sides are also available with or without the chain latch for custom applications. Bed sides ship by Motor Freight and must be prepaid. NO STAKE POCKET HOLES ST SERIES - NO BODY LINES (otherwise like original) 1958 C Suburban Carrier Pickup Jim Van Hooser, Davisburg, MI CHEVY CAMEO/C SUBURBAN BED SIDES MAR-K makes the inner steel bed sides for Cameo and Suburban trucks. These trucks have an outer, fiberglass shell, not available from MAR-K. Inner Panel with Stake Pocket Holes and Holes for Skin CAMEO/SUBURBAN DR INNER PANEL... $ ea CAMEO/SUBURBAN PA INNER PANEL ea Inner Panel no Stake Pocket Holes with Holes for Skin CAMEO/SUBURBAN DR INNER PANEL... $ ea CAMEO/SUBURBAN PA INNER PANEL ea 42 TO ORDER CALL FAX

43 *Center stake pockets included on bed sides. ** Passenger side fuel hole sold as an upgrade Long Stepside with Stake Pocket Holes and Fender Holes STEPSIDE DR CHEVY ONLY... $ ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR C 1/2 TON ONLY ea STEPSIDE PA C 1/2 TON ONLY ea STEPSIDE DR C 3/4 TON ONLY ea STEPSIDE PA C 3/4 TON ONLY ea STEPSIDE DR* CHEVY ONLY ea STEPSIDE PA* CHEVY ONLY ea STEPSIDE DR* CHEVY ONLY ea STEPSIDE PA* CHEVY ONLY ea STEPSIDE DR* ea STEPSIDE PA* ** ea st STEPSIDE DR-SOLD AS PAIRS ONLY ea st STEPSIDE PA-SOLD AS PAIRS ONLY ea nd-57 89" STEPSIDE DR ea nd-57 89" STEPSIDE PA ea " STEPSIDE DR ea " STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea Long Stepside no Stake Pocket Holes with Fender Holes STEPSIDE DR CHEVY ONLY... $ ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR CHEVY ONLY ea STEPSIDE PA CHEVY ONLY ea STEPSIDE DR C 1/2 TON ONLY ea STEPSIDE PA C 1/2 TON ONLY ea STEPSIDE DR C 3/4 TON ONLY ea STEPSIDE PA C 3/4 TON ONLY ea STEPSIDE DR* CHEVY ONLY ea STEPSIDE PA* CHEVY ONLY ea STEPSIDE DR* CHEVY ONLY ea STEPSIDE PA* CHEVY ONLY ea STEPSIDE DR* ea STEPSIDE PA* ** ea st STEPSIDE DR-SOLD AS PAIRS ONLY ea st STEPSIDE PA-SOLD AS PAIRS ONLY ea nd-57 89" STEPSIDE DR ea nd-57 89" STEPSIDE PA ea " STEPSIDE DR ea " STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea MAR K BED SIDES AND UPGRADES BED SIDE UPGRADES MAR-K now offers ways to customize your Stepside and Ford Flareside bed sides. Upgrades allow you to change the way a bed side is made to better fit your needs. Eliminate the latch on your bed sides or give yourself shiny stainless angles. WITH MAR-K Whatever you choose, you LATCH PIN can have bed sides "your way" at MAR-K! Be sure to mention the upgrade part PA/RH SIDE FUEL HOLE number for EACH bed side when ordering parts. You need to order two (2) of each upgrade for a pair of bed sides. Allow additional time for delivery. Custom parts are not returnable. Ford Flareside Upgrades are found on page 44. Call or check website for prices STEPSIDE UPGRADES /47-48 FUEL HOLE PASSENGER/RH BED SIDE ONLY TEARDROP INSTALL CURL AT FRONT TEARDROP INSTALL CURL AT REAR ANGLE REPLACE STEEL - POLISHED STAINLESS ** ANGLE REPLACE STEEL - UNPOLISHED STAINLESS ** ANGLE NOT WELDED, BUT INCLUDED ANGLE STRIP WITH NO HOLES FENDER HOLES DELETE STAKE POCKET, FRONT NOT WELDED BUT INCLUDED STAKE POCKET, REAR NOT WELDED BUT INCLUDED NO LATCH/NO CHAIN HOLES TAILGATE HOLES - MAR-K TAILGATE W/ LATCH & LINK AXLE CUT-OUT REMOVED STEPSIDE UPGRADES TAILGATE HOLES - MAR-K FLUSH TAILGATE W/HANDLE STAKE POCKET, CENTER NOT WELDED BUT INCLUDED AXLE CUT-OUT REMOVED STEPSIDE UPGRADES TEARDROP INSTALL CURL AT REAR ANGLE REPLACE STEEL - POLISHED STAINLESS ** ANGLE REPLACE STEEL - UNPOLISHED STAINLESS ** ANGLE NOT WELDED, BUT INCLUDED ANGLE STRIP WITH NO HOLES FENDER HOLES DELETE DIMPLES (EMBOSSMENT) DELETE STAKE POCKET, FRONT NOT WELDED BUT INCLUDED STAKE POCKET, REAR NOT WELDED BUT INCLUDED AXLE CUT-OUT REMOVED NO LATCH/NO CHAIN HOLES TAILGATE HOLES - MAR-K FLUSH TAILGATE W/HANDLE TAILGATE HOLES - MAR-K TAILGATE W/ LATCH & LINK Individual teardrops also sold separately. See page 44. MAKING CUSTOM BED SIDES MAR-K makes bed sides in a dedicated manufacturing cell so that custom bed sides with upgrades can be made as soon as possible. MAR-K has many different custom upgrades available for a variety of and Ford bed sides. TO ORDER CALL FAX

44 BED SIDES AND UPGRADES MAR-K bed sides begin with electro-galvanized steel punched in our CNC Turret punch press SHORT FLARESIDE (STEPSIDE) Short Flareside with Stake Pocket Holes and Fender Holes FLARESIDE DR... $ ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea Short Flareside no Stake Pocket Holes with Fender Holes FLARESIDE DR... $ ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea Flareside is same as Stepside TECH TIP: BED SIDES - Ford front bed panels are always bolted to the bed side at the top angled surface (two bolts on each side), and riveted or bolted or welded at the vertical surface. Customers drill their own holes or weld them to the front bed panel as they see fit. BED SIDES ARE SHIPPED BY MOTOR FREIGHT AND MUST BE PREPAID. BED SIDE UPGRADES Upgrades allow you to change the way a bed side is made to better fit your needs. Eliminate the latch on your bed sides or give yourself teardrops welded into your curls. Whatever you choose, you can have bed WITH TEARDROPS WELDED ON sides "your way" at MAR-K! Be sure to mention the upgrade part number for EACH bed side when ordering parts. You need to order two (2) of each upgrade for a pair of bed sides. Allow additional time for delivery. Custom parts are not returnable. Stepside Upgrades are found on page FLARESIDE (STEPSIDE) TEARDROP INSTALL CURL AT FRONT TEARDROP INSTALL CURL AT REAR NO EYEBOLT HOLES (FOR CHAIN LATCH) FENDER HOLES DELETE STAKE POCKET, FRONT NOT WELDED BUT INCLUDED STAKE POCKET, REAR NOT WELDED BUT INCLUDED EXTENSION, FRONT NOT WELDED BUT INCLUDED EXTENSION, REAR NOT WELDED BUT INCLUDED TAILGATE HOLES - MAR-K TG WITH LATCH & LINK BED SIDE WOOD FLOOR SEAL The Box Side Wood Floor Seal for Ford Flareside trucks is a black rubber seal made to fit between the bed side flange and the wood floor on each side. This part is purchased from an outside vendor Short Flareside BEDSIDE WOOD FLOOR SEAL... $22.00 pr BED SIDE TEARDROPS - Add that finishing touch to your Ford or early bed side with a MAR-K teardrop. One 16 gage steel piece is yours FREE when you purchase your or Ford bed sides (for the years listed below). Just weld it in the curl of your Flareside or Stepside truck to achieve the latest smooth look. Two pieces required per bed side. Sold per piece are for rear curl only STEPSIDE DR/PA... $ 7.50 ea STEPSIDE DR/PA ea STEP/FITS MAR-K BED SIDES DR ea STEP/FITS MAR-K BED SIDES PA ea STEPSIDE (ORIGINAL BED SIDES) DR ea STEPSIDE (ORIGINAL BED SIDES) PA ea FLARESIDE DR/PA ea 44 TO ORDER CALL FAX

45 STAKE POCKETS - MAR-K makes stake pocket replacements for your original bed sides. Made with original contours using 16 gage electrogalvanized steel. Made by MAR-K in Oklahoma City, USA! A complete MAR-K bed side includes the front and rear stake pockets, so it is not necessary to order these parts in addition to your MAR-K bed sides. Stepside Stake Pockets Front STEPSIDE DR/PA... $45.00 ea STEPSIDE DR/PA ea STEPSIDE DR ea STEPSIDE PA ea CAMEO/SUBURBAN DR ea CAMEO/SUBURBAN PA ea STEPSIDE DR ea STEPSIDE PA ea Stepside Stake Pockets Rear STEPSIDE DR WITH LATCH... $65.00 ea STEPSIDE PA WITH LATCH ea CHEVY STEPSIDE DR WITH LATCH ea CHEVY STEPSIDE PA WITH LATCH ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea CAMEO/SUBURBAN DR ea CAMEO/SUBURBAN PA ea STEPSIDE DR ea STEPSIDE PA ea STEPSIDE DR ea STEPSIDE PA ea Flareside Stake Pockets Front FLARESIDE DR... $45.00 ea FLARESIDE PA ea Flareside Stake Pockets Rear FLARESIDE DR... $55.00 ea FLARESIDE PA ea FLARESIDE DR ea FLARESIDE PA ea Flareside is same as Stepside STAKE POCKET HOLE COVERS Steel pieces cover up your stake pocket holes on Stepside and Fleetside trucks. Just paint and push in! Bases are made of stainless steel to prevent rust and corrosion. Made by MAR-K in Oklahoma, USA. Short bed trucks require 2 pair. Long bed trucks require 3 pair STEPSIDE - Top 2-5/16" X 2-3/32" pr STEPSIDE - Top 2-1/4" X 1-9/16" pr FLEETSIDE - Top 2-1/4" X 1-9/16" pr SPORTSIDE - Top 2-1/4" X 1-9/16" pr MAR K STAKE POCKETS & EXTENSIONS MAR-K parts are checked by our production manager to be sure of accuracy and correct fit of the stake pockets. EXTENSION PANELS- MAR-K makes extension panels as replacement parts for Ford original bed sides. Made by MAR-K in Oklahoma City, USA! MAR-K bed sides include front and back extension panels, so it is not necessary to order extensions in addition to your MAR-K bed sides. Short Flareside Extension Panels Front SHORT FLARESIDE DR... $23.00 ea SHORT FLARESIDE PA ea SHORT FLARESIDE DR ea SHORT FLARESIDE PA ea SHORT FLARESIDE DR ea SHORT FLARESIDE PA ea Short Flareside Extension Panels Rear SHORT FLARESIDE DR... $18.00 ea SHORT FLARESIDE PA ea SHORT FLARESIDE DR ea SHORT FLARESIDE PA ea SHORT FLARESIDE DR ea SHORT FLARESIDE PA ea Flareside is same as Stepside TO ORDER CALL FAX

46 BED SIDE HOLE CAPS The Chevrolet Bowtie is engraved into MAR-K's Bed Side Hole Caps in the HAAS Machining Center. Stepside Satin... $34.00 pr STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" STEPSIDE (FITS MAR-K BED SIDES) 1-19/32" STEPSIDE 1-11/16" Stepside Polished... $34.00 pr STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" STEPSIDE (FITS MAR-K BED SIDES) 1-19/32" STEPSIDE 1-11/16" Stepside Satin Bowtie... $45.00 pr STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" STEPSIDE (FITS MAR-K BED SIDES) 1-19/32" STEPSIDE 1-11/16" Stepside Polished Bowtie... $45.00 pr STEPSIDE (FITS MAR-K BED SIDES) 1-19/32" STEPSIDE 1-11/16" Stepside with Reflectors... $40.00 pr RED STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" AMBER STEP (FITS MAR-K BED SIDES ONLY) 1-1/4" RED STEP (FITS MAR-K BED SIDES) 1-19/32" AMBER STEP (FITS MAR-K BED SIDES) 1-19/32" RED STEPSIDE 1-11/16" AMBER STEPSIDE 1-11/16" Stepside Standard Lights... $70.00 pr RED STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" AMBER STEP (FITS MAR-K BED SIDES ONLY) 1-1/4" RED STEP (FITS MAR-K BED SIDES) 1-19/32" AMBER STEP (FITS MAR-K BED SIDES) 1-19/32" RED STEPSIDE 1-11/16" AMBER STEPSIDE 1-11/16" Stepside LED Lights... $ pr RED STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" AMBER STEP (FITS MAR-K BED SIDES ONLY) 1-1/4" RED STEP (FITS MAR-K BED SIDES) 1-19/32" AMBER STEP (FITS MAR-K BED SIDES) 1-19/32" RED STEPSIDE 1-11/16" AMBER STEPSIDE 1-11/16" Stepside LED Lights... $ pr WHITE STEPSIDE (FITS MAR-K BED SIDES ONLY) 1-1/4" WHITE STEP (FITS MAR-K BED SIDES) 1-19/32" WHITE STEPSIDE 1-11/16" Flareside Satin... $34.00 pr FLARESIDE 1-1/4" FLARESIDE 1-9/32" Flareside Polished... $34.00 pr FLARESIDE 1-1/4" FLARESIDE 1-9/32" Flareside with Reflectors... $40.00 pr RED FLARESIDE 1-1/4" AMBER FLARESIDE 1-1/4" Flareside Standard Lights... $70.00 pr RED FLARESIDE 1-1/4" AMBER FLARESIDE 1-1/4" Flareside LED Lights... $ pr RED FLARESIDE 1-1/4" AMBER FLARESIDE 1-1/4" Flareside LED Lights... $ pr WHITE FLARESIDE 1-1/4" BED SIDE HOLE CAPS MAR-K has developed a billet aluminum cap for the curl opening in the end of your Stepside or Flareside bed side. A rubber o-ring around the end of the caps helps the caps stay in place. Available smooth, with bowtie emblem, reflectors or lights. Lighted hole caps are available with standard 12-volt lights or super bright 12-volt LEDs. Tech Tip: There are variations in the bed side curls, so we suggest you check the diameter of your curl before ordering. Diameter of hole caps are: Stepside (fits MAR-K Bed Sides only) /4" Stepside /32" (also fits MAR-K Bed Sides) Stepside /16" Flareside /4" Flareside /32" DODGE Stepside /64" DODGE Stepside Satin... $34.00 pr STEPSIDE 1-31/64" Stepside Polished... $34.00 pr STEPSIDE 1-31/64" Stepside Standard Lights... $70.00 pr RED STEPSIDE 1-31/64" AMBER STEPSIDE 1-31/64" Stepside LED Lights... $ pr RED STEPSIDE 1-31/64" AMBER STEPSIDE 1-31/64" Stepside LED Lights... $ pr WHITE STEPSIDE 1-31/64" Differences between LED and Lighted Hole Caps White LED light includes 12 volt single intensity 19 LED bulb, and 2 pigtail wires. Can be used for backup. Red LED light includes 12 volt dual intensity 19 LED bulb, and 3 pigtail wires. Can be used for running lamp, stop and turn signal. Amber LED light includes 12 volt single intensity 19 LED bulb, and 2 pigtail wires. Can be used for turn signal. Red Standard Light includes red lens and 12 volt light, type 194 miniature single filament bulb. Can be used for turn signal and brake light or running lamp; not all three. Amber Standard Light includes amber lens and 12 volt light, type 194 miniature single filament bulb. Can be used for turn signal. PLEASE NOTE! The lighted hole cap will provide additional lighting at the rear of your truck, but is not intended to replace your DOT legal taillight/brake light system. Flat Panel Billet Polished Lights on page TO ORDER CALL FAX

47 BED SIDE INNER REPAIR PANELS Available for short bed (shown) and long bed fleetside trucks. These go in front of and behind the wheel well to repair the rusted or damaged inner wall of the fleetside bed sides. Holes are punched for attachment to the wheel tubs and the wood bed. The top is embossed with an offset for ease of welding and placement of panels. These panels are made of 16-gage electro-galvanized steel. Made by MAR-K in Oklahoma City, USA. Includes complete instructions. Complete Sets Short Fleetside... $ set FRONT AND REAR SHORT FLEET FRONT AND REAR SHORT FLEET FRONT AND REAR SHORT FLEET Complete Sets Long Fleetside... $ set FRONT AND REAR LONG FLEET FRONT AND REAR LONG FLEET FRONT AND REAR LONG FLEET FRONT AND REAR LONG FLEET Individual Pieces Short Fleetside... $40.00 ea FRONT SHORT FLEET DR/LH FRONT SHORT FLEET PA/RH REAR SHORT FLEET DR/LH REAR SHORT FLEET PA/RH FRONT SHORT FLEET DR/LH FRONT SHORT FLEET PA/RH REAR SHORT FLEET DR/LH REAR SHORT FLEET PA/RH FRONT SHORT FLEET DR/LH FRONT SHORT FLEET PA/RH REAR SHORT FLEET DR/LH REAR SHORT FLEET PA/RH Individual Pieces Long Fleetside... $45.00 ea FRONT LONG FLEET DR/LH FRONT LONG FLEET PA/RH REAR LONG FLEET DR/LH REAR LONG FLEET PA/RH FRONT LONG FLEET DR/LH FRONT LONG FLEET PA/RH FRONT LONG FLEET DR/LH FRONT LONG FLEET PA/RH REAR LONG FLEET DR/LH REAR LONG FLEET PA/RH FRONT LONG FLEET DR/LH FRONT LONG FLEET PA/RH REAR LONG FLEET DR/LH REAR LONG FLEET PA/RH MAR K FLEETSIDE REPAIR PANELS The top of MAR-K's Fleetside Repair Panels is embossed with an offset using this CNC press brake WHEELHOUSE REPAIR FLANGE This flange for Fleetside and Fleetside trucks is used to repair the rusted or damaged area of the wheel tub where it meets the wood floor. 16-gage electro-galvanized steel flange has bed strip embossment like original. Instructions included. Requires 2 flanges per truck. Made by MAR-K in Oklahoma City, USA. Fleetside FLEETSIDE... $40.00 ea FLEETSIDE... $40.00 ea Tech Tip for Wheelhouse Repair Flange: This part is to repair the wheel tub flange where it meets the wood floor. These areas are prone to rusting because of the wood holding moisture and the steel flange resting on the wood floor. This repair flange may be used to completely replace this flange or be used in pieces to repair this area. Tech Tip for Inner Repair Panels: These replacement panels extend from the front bed panel to the wheelhouse opening and from the rear stake pocket to the wheelhouse opening. They will replace the sheet metal from the lower flange with holes to the top of the wheelhouse opening on the bed side. Experienced installers may choose not to use the entire replacement panel if it is not needed, but the instructions show the entire panel being used. We strongly advise you to read the instructions thoroughly and understand that cutting and welding are involved before proceeding. TO ORDER CALL FAX

48 TAILGATES CHEVY/C Electro-galvanized steel is bent to the correct curve on a MAR-K tailgate. Special machines operated by highly trained employees make these parts fit as they should. TAILGATES MAR-K makes tailgates in many styles for, Ford and Dodge trucks, including styles with louvres. Attention to detail such as correct steel gage thickness, welded construction like the original, and accurate bends and dimensions result in a tailgate that fits right and looks great! Options include custom tailgates without the latch, flush tailgates, tailgates with handle and latch mechanism and tailgates with hidden latches and link assembiles. See pages Chevrolet and C script tailgates are Restoration Parts supplied by MAR-K Specialized Manufacturing. Bowtie embossed tailgates are made by MAR-K and are Licensed Parts. MAR-K tailgates are made in Oklahoma City, USA! STEPSIDE - LOUVRES - BOWTIE "NO LATCH" Stepside - Standard Tailgates with and without Latch SMOOTH NO CHAIN LATCH*... $ ea SMOOTH WITH CHAIN LATCH* ea EMBOSSED BOWTIE NO CHAIN LATCH* ea EMBOSSED BOWTIE WITH CHAIN LATCH* ea LOUVRES - 4 ROW NO CHAIN LATCH* ea LOUVRES - 4 ROW WITH CHAIN LATCH* ea LOUVRES - 7 ROW NO CHAIN LATCH* ea LOUVRES - 7 ROW WITH CHAIN LATCH* ea LOUVRES - BOWTIE NO CHAIN LATCH* ea LOUVRES - BOWTIE WITH CHAIN LATCH* ea "CHEVROLET" SCRIPT NO CHAIN LATCH* ea "CHEVROLET" SCRIPT WITH CHAIN LATCH* ea "CHEVROLET" SCRIPT NO CHAIN LATCH** ea "CHEVROLET" SCRIPT WITH CHAIN LATCH** ea SMOOTH NO CHAIN LATCH** ea SMOOTH WITH CHAIN LATCH ** ea EMBOSSED BOWTIE NO CHAIN LATCH** ea EMBOSSED BOWTIE WITH CHAIN LATCH** ea LOUVRES - 4 ROW NO CHAIN LATCH** ea LOUVRES - 4 ROW WITH CHAIN LATCH** ea LOUVRES - 7 ROW NO CHAIN LATCH** ea LOUVRES - 7 ROW WITH CHAIN LATCH** ea LOUVRES - BOWTIE NO CHAIN LATCH** ea LOUVRES - BOWTIE WITH CHAIN LATCH** ea *Tailgates for will NOT fit a 39 C. **Tailgates made by MAR-K for the 40 need a style hinge with a hinge bushing adapter. See below. The hinge bushing adapter presses on to a tailgate hinge so that it can be used with the 1940 tailgate and bed sides. Original 1940 hinges are larger than hinges and are not available. HINGE BUSHING ADAPTER FOR 40 CHEVY TAILGATE HINGE BUSHING ADAPTER... $33.00 pr STEPSIDE - "CHEVROLET" SCRIPT C STEPSIDE - "C" SCRIPT STEPSIDE - LOUVRES - 4 ROW Stepside - Standard Tailgates with and without Latch SMOOTH NO CHAIN LATCH... $ ea SMOOTH WITH CHAIN LATCH ea LOUVRES - 4 ROW NO CHAIN LATCH ea LOUVRES - 4 ROW WITH CHAIN LATCH ea LOUVRES - 7 ROW NO CHAIN LATCH ea LOUVRES - 7 ROW WITH CHAIN LATCH ea LOUVRES - BOWTIE WITH CHAIN LATCH ea EMBOSSED BOWTIE NO CHAIN LATCH ea EMBOSSED BOWTIE WITH CHAIN LATCH ea "CHEVROLET" SCRIPT NO CHAIN LATCH ea "CHEVROLET" SCRIPT W/CHAIN LATCH ea "C" SCRIPT NO CHAIN LATCH ea "C" SCRIPT WITH CHAIN LATCH ea SMOOTH NO CHAIN LATCH ea SMOOTH WITH CHAIN LATCH ea LOUVRES - 4 ROW NO CHAIN LATCH ea LOUVRES - 4 ROW WITH CHAIN LATCH ea LOUVRES - 7 ROW NO CHAIN LATCH... $ ea STEPSIDE TAILGATES CONTINUED ON PAGE TO ORDER CALL FAX

49 TAILGATES CHEVY/C STEPSIDE - LOUVRES - "BOWTIE" STEPSIDE - EMBOSSED "BOWTIE" LOUVRES - MAR-K offers louvres in four (4) rows, seven (7) rows and eight (8) rows. We also offer the "Bowtie" design for Chevrolet pickups. The louvres are 4" wide, and have 6" center spacing (6" measuring from the center of one louvre to the center of the next horizontally). The louvres in the tailgates are made to line up with those in our rear roll pan. See pages The louvre patterns are designed to look the best on each given year model of tailgate. This is why the tailgate has seven (7) rows, while the wider Ford tailgate has eight (8) rows. FLUSH TAILGATES FOR STEPSIDES STEPSIDE - NO SCRIPT C STEPSIDE - "C" SCRIPT Stepside - Standard Tailgates with and without Latch LOUVRES - 7 ROW WITH CHAIN LATCH ea LOUVRES - BOWTIE NO CHAIN LATCH ea LOUVRES - BOWTIE WITH CHAIN LATCH ea EMBOSSED BOWTIE NO CHAIN LATCH ea EMBOSSED BOWTIE WITH CHAIN LATCH ea "CHEVROLET" SCRIPT W/ CHAIN LATCH ea "CHEVROLET" SCRIPT NO CHAIN LATCH ea "C" SCRIPT WITH CHAIN LATCH ea "C" SCRIPT NO CHAIN LATCH ea "C" SCRIPT WITH CHAIN LATCH ea "C" SCRIPT NO CHAIN LATCH ea NO SCRIPT WITH CHAIN LATCH ea NO SCRIPT NO CHAIN LATCH ea SMOOTH NO CHAIN LATCH ea SMOOTH WITH CHAIN LATCH ea LOUVRES - 4 ROW NO CHAIN LATCH ea LOUVRES - 4 ROW WITH CHAIN LATCH ea LOUVRES - 7 ROW NO CHAIN LATCH ea LOUVRES - 7 ROW WITH CHAIN LATCH ea LOUVRES - BOWTIE NO CHAIN LATCH ea LOUVRES - BOWTIE WITH CHAIN LATCH ea EMBOSSED BOWTIE NO CHAIN LATCH ea EMBOSSED BOWTIE WITH CHAIN LATCH ea "C" SCRIPT WITH CHAIN LATCH ea "C" SCRIPT NO CHAIN LATCH ea "FLUSH" TAILGATES 1955 Chevy Short Stepside Doug Walt, Houston, TX MAR-K Flush Smooth Tailgate and Rear Pan For custom applications on stepsides, we make a double wall tailgate which is smooth both inside and outside. The appearance is similar to a smooth tailgate with a cover. Same great MAR-K quality as all of our other tailgates. It is available with or without Bowtie embossment on the outer surface and with or without chain latch brackets for Made in Oklahoma City, USA! Stepside - Flush Tailgates with and without Latch FLUSH SMOOTH NO CHAIN LATCH**... $ ea FLUSH EMB BOWTIE NO CHAIN LATCH** ea FLUSH SMOOTH NO CHAIN LATCH ea FLUSH EMB BOWTIE NO CHAIN LATCH ea FLUSH SMOOTH WITH CHAIN LATCH ea FLUSH SMOOTH NO CHAIN LATCH ea FLUSH EMB BOWTIE WITH CHAIN LATCH ea FLUSH EMB BOWTIE NO CHAIN LATCH ea **Flush Tailgates made by MAR-K for the require a style hinge without the hinge adapter. TO ORDER CALL FAX

50 TAILGATES HANDLE & LATCH Made in Oklahoma City, USA! MAR-K Smooth Tailgate with Handle and Latch 1966 Chevy Short Stepside Keith Hansen, North Plains, OR Link Assemblies also available for use on original tailgates S LINK ASSEMBLY... $ pr LINK ASSEMBLY pr S LINK ASSEMBLY pr LINK ASSEMBLY pr See page 53 for more information on link assembiles. LOOK! NO CHAINS - FLUSH TAILGATE WITH HANDLE AND LATCH MECHANISM WITH STAINLESS OR STEEL LINK ASSEMBLIES The handle is inside the bed so the outside has a smooth, flush look, like the look of a fleetside tailgate with a smooth tailgate cover. Customizing kit is included to convert your current bed sides to work with the handle and latching mechanism. Tailgate is made of 16 gage electro-galvanized steel. Available with or without Bowtie embossment on the outer surface. Installation of this part requires modification to bed sides. MAR-K bed sides are also available with custom bed side upgrades that have the latch mechanism already installed. See page 43. Stepside - Tailgates w/handle/latch and Stainless Links S SMOOTH WITH HANDLE & LATCH **... $ kit S EMB BOWTIE WITH HANDLE & LATCH** kit S SMOOTH WITH HANDLE & LATCH kit S EMB BOWTIE WITH HANDLE & LATCH kit S SMOOTH WITH HANDLE & LATCH kit S EMB BOWTIE WITH HANDLE & LATCH kit Stepside - Tailgates w/handle/latch and Steel Links SMOOTH WITH HANDLE & LATCH ** kit EMB BOWTIE WITH HANDLE & LATCH** kit SMOOTH WITH HANDLE & LATCH kit EMB BOWTIE WITH HANDLE & LATCH kit SMOOTH WITH HANDLE & LATCH kit EMB BOWTIE WITH HANDLE & LATCH kit **Flush Tailgates with Handle and Latch made by MAR-K for the require a style hinge without the hinge adapter FLEETSIDE TAILGATES - NO CHAINS - WITH HANDLE AND LATCH MECHANISM MAR-K now makes custom Fleetside tailgates which use a handle with latches and stainless or steel link assemblies to open and close the back of the bed. Instructions are included. The latches are inside the tailgate ends with only the center handle visible on the inside. This tailgate is perfect for those who want the traditional tailgate without the chains, which are noisy and sometimes damage the paint finish. Made in Oklahoma City, USA. Included with the tailgate is a customizing kit to convert stock bed sides to work with the latching mechanism and links. Made of 16 gage electro-galvanized steel. CHEVROLET and C scripts made with Stepside Stampings. Please note: On some Fleetside trucks, the original bracket that is attached to the bed sides that the pivot bolt threads into must be removed. On most trucks this bracket is bolted in place from the factory. Some trucks however, the original bracket may have been welded in place. If this is the case, then you need the bed side modification kit BEDSIDE MODIFICATION KIT kit Link Assemblies also available for use on original tailgates S FLEETSIDE LINK ASSEMBLY STAINLESS... $ pr FLEETSIDE LINK ASSEMBLY STEEL pr See page 53 for more information on link assembiles. Made in Oklahoma City, USA! Tailgates with Handle and Latch S "CHEVY" SCRIPT W/STAINLESS LINKS... $ kit "CHEVY" SCRIPT WITH STEEL LINKS kit S "C" SCRIPT WITH STAINLESS LINKS kit "C" SCRIPT WITH STEEL LINKS kit S NO SCRIPT WITH STAINLESS LINKS kit NO SCRIPT WITH STEEL LINKS kit Tailgates with Handle and Latch and 3rd Brake Light S "CHEVY" SCRIPT W/STAINLESS LINKS kit "CHEVY" SCRIPT WITH STEEL LINKS kit S "C" SCRIPT WITH STAINLESS LINKS kit "C" SCRIPT WITH STEEL LINKS kit S NO SCRIPT WITH STAINLESS LINKS kit NO SCRIPT WITH STEEL LINKS kit Additional parts required for Tailgate with 3rd Brake Light SPECIAL TRUNNION FOR 3RD BRAKE LT pr LOGIC CIRCUIT FOR 3RD BRAKE LIGHT ea 50 TO ORDER CALL FAX

51 TAILGATE KITS WITH STAINLESS OR STEEL HIDDEN LATCHES AND LINK ASSEMBLIES FOR CHEVROLET AND C STEPSIDES MAR-K makes complete tailgates for Stepsides modified to use hidden latches and link assemblies. The latches are inside the tailgate with only the knob visible on the inside. This tailgate is perfect for those who want the traditional tailgate without the chains, which are noisy and sometimes damage the paint finish. Tailgates are made of 16 gage electrogalvanized steel in Oklahoma City, USA! Instructions included. Included with the tailgate is a customizing kit to convert stock bed sides to work with the hidden latches and links. MAR-K s bed sides are available with the upgrade to work with these tailgates! To order the upgrade with your bedside order, use part number , order one upgrade per bedside. Stepside with Hidden Latches and Stainless Links S SMOOTH WITH LATCH & LINK*... $ kit S EMBOSSED BOWTIE WITH LATCH & LINK* kit S LOUVRES - 4 ROW WITH LATCH & LINK* kit S LOUVRES - 7 ROW WITH LATCH & LINK* kit S LOUVRED BOWTIE WITH LATCH & LINK* kit S 39 "CHEVROLET" SCRIPT W/ LATCH & LINK* kit S SMOOTH WITH LATCH & LINK kit S EMBOSSED BOWTIE WITH LATCH & LINK kit S LOUVRES - 4 ROW WITH LATCH & LINK kit S LOUVRES - 7 ROW WITH LATCH & LINK kit S "CHEVROLET" SCRIPT W/ LATCH & LINK kit S "C" SCRIPT WITH LATCH & LINK kit S SMOOTH WITH LATCH & LINK kit S EMBOSSED BOWTIE WITH LATCH & LINK kit S LOUVRES - 4 ROW WITH LATCH & LINK kit S LOUVRES - 7 ROW WITH LATCH & LINK kit S "CHEVROLET" SCRIPT W/ LATCH & LINK kit S 54 "C" SCRIPT WITH LATCH & LINK kit S SMOOTH WITH LATCH & LINK kit S EMBOSSED NO SCRIPT W/ LATCH & LINK kit S EMBOSSED BOWTIE WITH LATCH & LINK kit S LOUVRES - 4 ROW WITH LATCH & LINK kit S LOUVRES - 7 ROW WITH LATCH & LINK kit S LOUVRED BOWTIE WITH LATCH & LINK kit S "C" SCRIPT WITH LATCH & LINK kit S "C" SCRIPT WITH LATCH & LINK kit *Tailgates for will NOT fit a 39 C. Stepside with Hidden Latches and Steel Links SMOOTH WITH LATCH & LINK *... $ kit EMBOSSED BOWTIE WITH LATCH & LINK* kit LOUVRES - 4 ROW WITH LATCH & LINK* kit LOUVRES - 7 ROW WITH LATCH & LINK* kit LOUVRED BOWTIE WITH LATCH & LINK* kit "CHEVROLET" SCRIPT W/ LATCH & LINK* kit *Tailgates for will NOT fit a 39 C. MAR K TAILGATES WITH LATCH & LINK Stepside with Hidden Latches and Steel Links (continued) SMOOTH WITH LATCH & LINK kit EMBOSSED BOWTIE WITH LATCH & LINK kit LOUVRES - 4 ROW WITH LATCH & LINK kit LOUVRES - 7 ROW WITH LATCH & LINK kit "CHEVROLET" SCRIPT W/ LATCH & LINK kit "C" SCRIPT WITH LATCH & LINK kit SMOOTH WITH LATCH & LINK kit EMBOSSED BOWTIE WITH LATCH & LINK kit LOUVRES - 4 ROW WITH LATCH & LINK kit LOUVRES - 7 ROW WITH LATCH & LINK kit "CHEVROLET" SCRIPT W/ LATCH & LINK kit "C" SCRIPT WITH LATCH & LINK kit SMOOTH WITH LATCH & LINK kit EMBOSSED NO SCRIPT W/ LATCH & LINK kit EMBOSSED BOWTIE WITH LATCH & LINK kit LOUVRES - 4 ROW WITH LATCH & LINK kit LOUVRES - 7 ROW WITH LATCH & LINK kit LOUVRED BOWTIE WITH LATCH & LINK kit "C" SCRIPT WITH LATCH & LINK kit "C" SCRIPT WITH LATCH & LINK kit TAILGATE HINGES AND TRUNNIONS The tailgate hinges are used at the base of the tailgate for opening and closing. They bolt to the bed side and have a cylindrical part that fits into the tailgate allowing it to rotate. Available for, Ford and Dodge Stepside trucks. Stepside STEEL... $49.50 pr HINGE BUSHING (FOR USE WITH HINGE) pr STEEL pr STAINLESS pr DODGE Stepside OUTER WITH BOLTS (REQ 2 PER TRUCK)... $22.00 ea CENTER WITH BOLTS (REQ 1 PER TRUCK) ea Flareside (Stepside) STEEL... $15.00 pr The tailgate trunnions are used just like hinges. They bolt to the bed side and have a cylindrical part that fits into the tailgate allowing it to rotate. Available for trucks. MAR-K urethane trunnions for reduce noise and rust! Fleetside trunnions include zinc-plated brackets Stepside URETHANE WITH UNPOL STAINLESS BOLT... $30.00 pr ZINC PLATED WITH ZINC PLATED BOLT pr Fleetside ZINC PLATED WITH ZINC PLATED BOLT... $26.00 pr TO ORDER CALL FAX

52 TAILGATES & DODGE DODGE UTILINE (STEPSIDE) TAILGATES MAR-K makes Dodge Tailgates that fit Dodge Utiline (Stepside) Pickups with 54" or 49" wide beds. These have the embossed pattern without the script and are made of 16 gage electro-galvanized steel in Oklahoma City, USA. Includes accurate bends and dimensions. The 54" tailgate is a reproduction of the Dodge original tailgate and is made to work with MAR-K's Dodge Li'l Red Express trim board set which is sold separately. Chains and hinges also sold separately, see pages DODGE Highside Utiline Stepside NO SCRIPT " WIDE BED... $ ea NO SCRIPT " WIDE BED NO LATCH ea NO SCRIPT 48-71/ORIG FOR " WIDE ea NO SCR 48-71/ORIG FOR " WIDE NO LCH ea Tailgate Latch available for replacement or custom applications DRIVER SIDE TAILGATE LATCH BRACKET... $33.00 ea PASSENGER SIDE TAILGATE LATCH BRACKET ea DRIVER SIDE STAKE POCKET LATCH BRACKET ea PASSENGER SIDE STAKE POCKET LCH BRACKET ea DODGE LI'L RED EXPRESS TRIM BOARDS MAR-K offers the oak trim board set for Dodge Li'l Red Express trucks. Set includes two (2) tailgate boards as shown and the six (6) piece wood set for the bed sides. Boards are unfinshed and you will need to drill the holes to exactly match your tailgate and bed sides. Stainless screws and capped nuts needed for installation are sold separately. DODGE Li'l Red Express Trim Boards COMPLETE SET (8 PIECES)... $ set Li'l Red Express Trim Board Hardware 1/4-20 x 5/8" Stainless screw and capped nut for Li'l Red Express trim boards. 50 pieces are included for complete replacement. Individual bolts are available on page POLISHED STAINLESS STEEL... $ kit UNPOLISHED STAINLESS STEEL kit TAILGATE BUMPER Made of black rubber, the Ford Tailgate Bumper fits into the ends of the tailgate for Ford Flaresides.* Flareside TAILGATE BUMPER... $4.00 pr FLARESIDE - LOUVRES - 8 ROW Short Flareside (Stepside) SMOOTH NO CHAIN LATCH ea SMOOTH WITH CHAIN LATCH ea LOUVRES - 4 ROW NO CHAIN LATCH ea LOUVRES - 4 ROW WITH CHAIN LATCH ea LOUVRES - 7 ROW NO CHAIN LATCH ea LOUVRES - 7 ROW WITH CHAIN LATCH ea Short/53-79 Long Flareside (Stepside) SMOOTH NO CHAIN LATCH... $ ea SMOOTH WITH CHAIN LATCH ea LOUVRES - 4 ROW NO CHAIN LATCH ea LOUVRES - 4 ROW WITH CHAIN LATCH ea LOUVRES - 8 ROW NO CHAIN LATCH ea LOUVRES - 8 ROW WITH CHAIN LATCH ea TAILGATES WITH LATCH AND STAINLESS OR STEEL LINK ASSEMBLIES MAR-K's custom Flareside (Stepside) tailgates use latches and link assemblies to open and close the back of the bed. The latches are inside the bed so the outside has a clean, smooth look. This tailgate is perfect for those who don t want the traditional tailgate chains, which are noisy and sometimes damage the paint finish. Choose from stainless or zinc-plated steel link assembiles. Made in Oklahoma City, USA. Included with the tailgate is a customizing kit to convert stock bed sides to work with the latching mechanism and links. MAR-K s bed sides are available with an upgrade (#102849) to work with the tailgate with latch and link! Short Flareside (Stepside) S SMOOTH WITH LATCH & STAINLESS LINKS... $ ea SMOOTH WITH LATCH & STEEL LINKS ea S LOUVRES - 4 ROW W/ LATCH & STAINLESS LINK ea LOUVRES - 4 ROW W/LATCH & STEEL LINKS ea S LOUVRES - 7 ROW W/LATCH & STAINLESS LINK ea LOUVRES - 7 ROW W/LATCH & STEEL LINKS ea Short/53-87 Long Flareside (Stepside) S SMOOTH WITH LATCH & STAINLESS LINKS ea SMOOTH WITH LATCH & STEEL LINKS ea S LOUVRES - 4 ROW W/LATCH & STAINLESS LINK ea LOUVRES - 4 ROW W/LATCH & STEEL LINKS ea S LOUVRES - 8 ROW W/LATCH & STAINLESS LINK ea LOUVRES - 8 ROW W/LATCH & STEEL LINKS ea *Ford tailgate bumper is purchased from an outside vendor. 52 TO ORDER CALL FAX

53 TAILGATE LINK ASSEMBLIES FOR, AND DODGE IN STAINLESS OR STEEL MAR-K makes tailgate link assemblies for custom applications for removal of chains on original tailgates. Available in brightly polished stainless steel or zinc-plated steel for corrosion resistance. These kits require modification to the bed sides and tailgate. Each pair includes links, upper and lower pivot points, hardware, installation template and instructions. Available for, Ford and Dodge Stepside trucks. Stainless links shown. Made by MAR-K in Oklahoma City, USA. Stepside/Fleetside S STEPSIDE STAINLESS... $ pr STEPSIDE STEEL pr S STEPSIDE STAINLESS pr STEPSIDE STEEL pr S STEPSIDE STAINLESS pr STEPSIDE STEEL pr S FLEETSIDE STAINLESS pr FLEETSIDE STEEL pr S FLEETSIDE STAINLESS pr Flareside (Stepside) S SHORT FLARESIDE STAINLESS... $ pr SHORT FLARESIDE STEEL pr S SHORT/53-87 LONG FLARE STAINLESS pr SHORT/53-87 LONG FLARE STEEL pr DODGE Stepside S HIGHSIDE STEPSIDE STAINLESS... $ pr HIGHSIDE STEPSIDE STEEL pr TAILGATE LATCHES FOR, AND DODGE MAR-K makes tailgate latches with a unique locking system that allows them to stay in the open position. These are spring-loaded and used in custom applications for replacing the old tailgate chains. Zinc plated or stainless steel (for and Dodge). Each pair includes latches, installation hardware and complete instructions. Stainless latches shown. Made by MAR-K in Oklahoma City, USA. Stepside/Fleetside S 34-39/41-87 STEPSIDE STAINLESS... $90.00 pr /41-87 STEPSIDE STEEL pr S FLEETSIDE STAINLESS pr FLEETSIDE STEEL pr Flareside (Stepside) FLARESIDE STEEL... $75.00 pr DODGE Highside Stepside S HIGHSIDE STEPSIDE STAINLESS... $ pr HIGHSIDE STEPSIDE STEEL... $95.00 pr MAR K TAILGATE LATCHES & LINKS A MAR-K employee attaches the two link pieces to each other using this special pressing tool. ROTARY STYLE TAILGATE LATCHES AND STAINLESS OR STEEL LINK ASSEMBLIES MAR-K now makes a kit for installing the hidden rotary style latches and link assemblies into a stock Ford tailgate. Adapter panel is made of 16 gage electro-galvanized steel and link assemblies are available in brightly polished stainless steel or zinc-plated steel. Includes customizing kit for your tailgate and complete instructions. Requires modification to the tailgate and bed sides. Made by MAR-K in Oklahoma City, USA. Flareside (Stepside) S SHORT FLARESIDE STAINLESS... $ pr SHORT FLARESIDE STEEL pr S SHORT/53-87 LONG FLARE STAINLESS pr SHORT/53-87 LONG FLARESIDE STEEL pr TOOLS TO HELP INSTALL 17/32" DRILL BIT: It is used in the installation of MAR-K Tailgate Link Assemblies for Dodge Highside Stepside and Ford Flareside trucks and tailgates with hidden latch and link. 5/8" HOLE SAW: This is used in the installation of MAR-K hidden latches on Stepside, Fleetside and Ford Flareside trucks.the tool is complete with hole saw, arbor, and 1/4" pilot drill. BED SIDE MODIFICATION KIT: Kit used to install MAR-K link assembly on some Fleetside trucks. The original bracket attached to the bed sides that the pivot bolt threads into must be removed. On most trucks this bracket is bolted in place from the factory. Some trucks however, the original bracket may have been welded in place. If this is the case, then you need the bed side modification kit. Tools to Help Install /32" DRILL BIT... $30.00 ea /8" HOLE SAW ea BEDSIDE MODIFICATION KIT kit TO ORDER CALL FAX

54 TAILGATE CHAIN PARTS TAILGATE CHAIN ASSEMBLIES - These are used on, Ford and Dodge Stepsides and early Fleetside trucks as a method of opening and closing the tailgate. MAR-K makes many of these chains in zinc plated steel and polished stainless steel in Oklahoma City, USA Ford Flareside Chains - The chains include an elongated link, eyebolt, hook and chain cover. The eyebolt attaches to the top portion of rear stake pocket (nut included). The elongated link is attached to the eyebolt. When tailgate is closed, the elongated link goes over the latch bracket on the tailgate and the hook goes through the latch bracket to keep the chain latched. The chains (shown) include the eyebolt, bracket, hook, bumper pad and chain cover. The eyebolt attaches to the top portion of the rear stake pocket (nut is included). The bracket is attached to the eyebolt. When the tailgate is closed, the hook goes through the bracket on the tailgate to keep the chain latched. Chains are available in polished stainless and zinc plated steel. Made by MAR-K. Stainless Steel with Clear Cover FLARESIDE... $ pr SHORT FLARESIDE pr SHORT/53-79 LONG FLARESIDE pr Zinc Plated Steel with Black Cover FLARESIDE... $71.50 pr SHORT FLARESIDE pr SHORT/53-79 LONG FLARESIDE pr Stepside Chains - Includes chain, eyebolt (41-87), split link (34-40), and hook. The eyebolt or split link attaches to the top portion of the rear stake pocket. Chains are available in polished stainless and original zinc plated steel. Chain covers - sold separately - were originally black, but also available in clear. Polished Stainless STEPSIDE - MAR-K MADE... $64.50 pr STEPSIDE - MAR-K MADE pr IM STEPSIDE** pr STEPSIDE - MAR-K MADE pr IM STEPSIDE* pr Zinc Plated Steel STEPSIDE - MAR-K MADE... $39.00 pr IM STEPSIDE ** pr IM STEPSIDE* pr *Purchased from outside vendor. **Purchased from an outside vendor. Markings L and R are incorrect (reversed). Eyebolts are zinc not sst Fleetside Chain Parts The Fleetside chain assembly consists of the latch bar, chain and hook. The chain cover, pivot bolt and latch bar cover are sold separately. The latch bar covers are grey rubber pads that fit over the chain bar to prevent the metal from scraping the truck CHAIN ASSY POL STAINLESS - MAR-K MADE. $95.00 pr IM CHAIN ASSEMBLY POL STAINLESS *** pr IM CHAIN ASSEMBLY ZINC PLATED STEEL* pr LATCH BAR COVER - GREY pr *Purchased from outside vendor. ***Purchased from an outside vendor. Not as highly polished as MAR-K chains Dodge Highside Chains - includes chain, hook and chain cover. The chain's last link is split for attachment to the top portion of the rear stake pocket. The hook attaches through a hole in the stake pocket. When tailgate is closed, hook goes through bed side and tailgate. While original chains were coated with black rubber, MAR-K chains are available in polished stainless or zinc plated steel. Made by MAR-K ASSEMBLY STAINLESS WITH CLEAR COVER... $ pr ASSEMBLY ZINC WITH BLACK COVER pr Chain covers - made of flexible tubular rubber, these covers are intended to prevent tailgate chains from hitting or scraping the tailgate. Covers come in black, grey, and clear and they come standard with a drain hole. MAR-K chain assemblies for Ford and Dodge include covers. The Latch Eye Bracket is used with the Fleetside assembly but sold separately. It attaches to the tailgate on each side. The chain hook goes through a hole in the latch eye bracket when the tailgate is closed LATCH EYE BRACKET ZINC PLATED STEEL... $18.00 pr The Pivot Bolt is used with the Fleetside assembly and sold separately. It attaches to the back of the bed side through the latch bar (part of the chain assembly). In stainless or zinc plated steel, it is sold by the piece. Requires 2 bolts per truck UNPOLISHED STAINLESS... $15.00 ea ZINC PLATED ea Chain Covers... $5.50 pr STEPSIDE - BLACK STEPSIDE - CLEAR STEPSIDE - BLACK STEPSIDE - CLEAR FLEETSIDE - BLACK FLEETSIDE - CLEAR FLEETSIDE - GREY DODGE HIGHSIDE STEPSIDE - BLACK DODGE HIGHSIDE STEPSIDE - CLEAR SHORT FLARESIDE - BLACK SHORT FLARESIDE - CLEAR SHORT FLARESIDE - BLACK SHORT FLARESIDE - CLEAR SHORT/53-79 LONG - BLACK SHORT/53-79 LONG - CLEAR 54 TO ORDER CALL FAX

55 BATTERY TRAYS AND HOLD DOWNS Battery trays are available for 55 2nd-72 trucks. MAR-K battery trays are made in Oklahoma City, USA, with all original lines and holes. These stainless steel battery tray parts are excellent reproductions of the original. They include holes for mounting, as well as a center drain hole. MAR-K also makes the battery hold down. Hold downs and hardware kits may be purchased separately in stainless. The 55 2ND-57 battery tray assemblies are made of polished stainless steel. Notice the detail of the lines and the bends of the assemblies. These bolt to the fire wall through predrilled holes. Drain holes are also drilled in the tray. Battery hold downs and hardware are sold separately ND-57 ASSEMBLY STAINLESS... $ ea ND-57 HOLD DOWN STAINLESS ea ND-57 HOLD DOWN HARDWARE STNLESS kit The battery tray assemblies are made of polished stainless steel. Notice the detail of the lines and the bends of the assemblies. These bolt to the fire wall through predrilled holes. Drain holes are also drilled in the tray. Battery hold downs and hardware are sold separately ASSEMBLY STAINLESS... $ ea HOLD DOWN STAINLESS ea HOLD DOWN HARDWARE STAINLESS kit and hardware are sold separately. MAR K BATTERY TRAYS & ASSEMBLIES A MAR-K employee holds this battery tray assembly while the polishing wheel buffs it to a shine. The battery tray assembly is made up of the side supports welded to the tray. This assembly is bolted on the passenger side in front of the motor, by the radiator. All bends and holes are manufactured to match the original. Battery hold downs ASSEMBLY STAINLESS... $ ea HOLD DOWN STAINLESS ea HOLD DOWN HDW STAINLESS kit The assembly is sold with or without the a/c hose bracket welded onto the assembly. These assemblies are excellent reproductions of the original. Installed in front of the motor on the passenger side, this will be a great addition under your hood. All bends and holes are made as original. Made of polished stainless steel. The a/c hose clamp and bolt are not available from MAR-K ASSEMBLY STAINLESS... $ ea ASSEMBLY STAINLESS W/ BRACKET ea TO ORDER CALL FAX

56 ORDERING INFORMATION MAR-K MAKES QUALITY PARTS FOR YOU! WALK-INS WELCOME! Showroom open Monday - Friday. Call if you are needing parts set aside - we'll have them ready when you arrive! 6625 West Wilshire phone: Kilpatrick Turnpike Hefner Lake Rockwell MacArthur 3 39th Expwy Downtown OKC MAR-K Ordering Information TO ORDER: CALL We are open Monday - Friday. Closed Saturday - Sunday. WALK-IN Showroom open Monday - Friday; call first to check item availability and hours. LEAVE A MESSAGE - on our answering machine - we will return your call during normal business hours. FAX hours a day MAIL to MAR-K 6625 West Wilshire Blvd., Oklahoma City, OK VISIT OUR WEBSITE! us at info@mar-k.com PAYMENT - Visa, MasterCard, Discover, personal or company check, money order or cashier's check. Must be US funds drawn on US banks. There is a charge for return checks. On orders paid by personal or company check, we will hold your order 10 business days to insure the check clears before processing. Checks are not accepted for walk-in orders. Credit card orders will only be shipped to the billing address on the credit card. Customers with declined or invalid credit cards will be notified by phone message or . Orders will be pending your reply. PRICES - All prices are subject to change without notice. MAR-K reserves the right to correct typographical errors. Prices on website orders may vary due to price changes or specials. SHIPMENT - Most orders ship by UPS ground. Bed Sides and a few other items ship by truck freight PREPAID. Please allow business days from payment date to receive your order. UPS 3-Day Select, 2nd Day Air, and Next Day Air are also available. Air orders are shipped the following business day after they are received. Shipping costs are calculated on a per-order basis in relation to your geographic location and other factors. Any shipping costs and handling charges will automatically be added to your order and are NOT REFUNDABLE. Finalizing your order implies your consent to this policy. The customer is responsible for any additional shipping charges due to incorrect address information provided by, or address rerouting charges made by the customer. DAMAGED MERCHANDISE - TRUCK FREIGHT - Your shipment will leave our dock in perfect condition. Do not sign for the shipment until you have thoroughly inspected the contents for damage and incorrect quantity, and any issues found have been noted on the Bill of Lading. Mar- K is not responsible for damages on shipments that are not noted as damaged or incorrect quantity upon arrival. UPS GROUND Open and inspect your packages immediately upon receipt. If any damages are found, you must contact MAR-K within 5 business days of delivery. You will be required to send pictures of the original packaging and damaged part(s) to MAR-K for evaluation. SHORTAGES/MISSING ITEMS: MAR-K will not be liable after 30 days for any claims of shortages or missing items in your order. Regardless of whether the package is shipped directly to you or to another location, it is your responsibility to confirm that all the parts were received and to contact us concerning any shortages within the 30 day period. BED BOLT KITS - Verify quantity, material and quality. If there are any problems or shortages, transactions must be made within 30 days of ship date. The sales staff is required to know the quantity of bolts you received before problems can be processed. Our sales staff is instructed not to send replacement bolts without this information from you. RETURNS/EXCHANGES - Returns are to be made within 30 days of ship date. To return or exchange any item, please call first. Notification and proof of purchase are required. Returns are subject to a restocking fee, and if part has been altered in any way from original state due to modification, time elapsed, or improper packaging on your part, it will not be eligible for refund, exchange or credit. Returned items must be in original boxes, unused, and unmodified. Please include a copy of your invoice with your returned items. WOOD BEDS - Wood beds are guaranteed for 14 days from ship date. Custom bed wood and strips and replacement boards are non-returnable. Our liability for parts is only for the replacement of a defective part or refund for the purchase price, NOT for the freight cost or any restocking fees if applicable. No other warranty is extended or should be implied. All statements and recommendations contained herein are based on information we believe to be reliable. Copyright 2014 MAR-K Quality Parts, LLC, all rights reserved. 56 TO ORDER CALL FAX

57 QUALITY PAR ARTS ORDER FORM MODEL DATE YEAR BODY STYLE LONG WHEEL BASE (8 Ft bed) SHORT WHEEL BASE (6 1/2 Ft bed) PANEL / FLAT BED CUSTOM / OTHER STEPSIDE FLEETSIDE MINI TRUCK BLAZER / SUBURBAN BILLING ADDRESS (credit card orders must ship to this address) CUSTOMER # /ORDER # NAME ATTN ADDRESS CITY STATE ZIP CODE PHONE FAX ADDRESS: SHIPPING ADDRESS (for check or money orders only) NAME COMPANY ATTN ADDRESS CITY STATE ZIP CODE PHONE FAX ADDRESS: *UPS will not ship to a PO Box. If cardholders billing address is a PO Box, please give physical address and send check or money order. Order will be shipped by UPS regular ground unless otherwise noted: allow business days for delivery SPECIAL UPS SHIPPING INSTRUCTIONS: 3-DAY SELECT 2-DAY AIR NEXT DAY AIR PART # QTY PC/PR/SET DESCRIPTION MATERIAL UNIT PRICE TOTAL CALL FOR SHIPPING CHARGES OR TO PLACE AN ORDER. Most parts are shipped UPS Prepaid. Some parts, including bed sides must be shipped by truck Freight PREPAID. RETURNS ARE SUBJECT TO A RESTOCKING FEE RETURNS OR EXCHANGES MUST BE MADE WITHIN 30 DAYS NO RETURNS ON PARTS THAT HAVE BEEN MODIFIED SUB-TOTAL SHIPPING (call, or fax for estimate) TAX (Oklahoma residents only) TOTAL (call, or fax for estimate) METHOD OF PAYMENT: VISA MASTERCARD DISCOVER PREPAID (Check or Money Order) Card #: Security #: Visa, MasterCard and Discover have 3 additional numbers on the back of the card in the signature strip. Signature (credit card only) Billing/shipping address must be the same for credit card orders. If not, please send a cashiers check or money order. Declined/invalid credit cards will be notified by phone/ . Expiration: / TO TO ORDER CALL CALL FAX OR OR MAIL MAIL TO TO WEST WEST WILSHIRE BLVD, BLVD, OKLAHOMA CITY, CITY, OK OK

58 QUALITY PAR ARTS ORDER FORM ADDITIONAL SPACES FOR ORDER PART # QTY PC/PR/SET DESCRIPTION MATERIAL UNIT PRICE TOTAL Thank you for considering MAR-K as your parts supplier. Please take time to answer the following questions about your experience with MAR-K, regarding the quality of our parts, service and catalog. How would you rate our catalog? (highest) Was it easy to locate your parts in our catalog? yes no Was it easy to find your make/model truck in our catalog? yes no Have you visited our website? yes no If yes, how would you rate our website? (highest) Have you ordered from our online catalog? yes no Have you ordered from other companies online? yes no Have you ordered from us before? yes no If yes, how would you rate our products? If yes, how would you rate the packaging? (highest) (highest) Did your parts arrive with the part undamaged? yes no If you called our office, how would you rate our service? (highest) What would you like to change about our catalog? OTHER COMMENTS, SUGGESTIONS OR REQUESTS: Please put my friend on your list: Name Address City State Zip Type of truck 58 TO ORDER CALL FAX

59 DATA SHEET FOR PANEL TRUCK, STAKE BED OR CUSTOM BED STRIP/ANGLE STRIP R E A R E N D ( ) ( ) O F ( ) ( ) ( ) ( ) F R O N T B E D S T R ( ) ( ) O F I P ( ) ( ) B E D ( ) OVERALL LENGTH = ALL ITEMS MUST BE FILLED OUT BEFORE WE CAN HELP 1. MEASURE THE LENGTH OF BED STRIPS SHIP TO: COMPANY 2. MEASURE FROM THE FRONT OF THE BED TO THE CENTER OF EACH HOLE. NAME IF ORIGINAL STRIPS NOT AVAILABLE, START AT THE FRONT BED PANEL AND MEASURE ADDRESS THE DISTANCE TO EACH CROSS SILL HOLE AND ANY OTHER HOLE LOCATIONS. CITY 3. WHICH HOLE SIZE? 5/16" OR 1/4" STATE ZIP 4. HOW MANY STRIPS? CIRCLE ONE: BED STRIPS ANGLE STRIPS BOTH 5. WHAT MATERIAL? (CHECK ONE) PHONE ( ) AM / PM POLISHED STAINLESS UNPOLISHED STAINLESS FAX ( ) COLD ROLLED STEEL 6. THESE STRIPS ARE FOR : YEAR MAKE / MODEL STRIPS UP TO AND INCLUDING 107 3/4" IN LENGTH ARE SHIPPED UPS. 7. THIS FORM IS TO BE USED FOR : (CHECK ONE) LENGTHS OVER 107 3/4" MUST BE SHIPPED BY I AM PLACING AN ORDER (MONEY IS ENCLOSED OR ON THE WAY) TRUCK. (FREIGHT PREPAID). IF YOU ARE PLACING AN ORDER CALL FOR SHIPPING CHARGES PARTS ARE SHIPPED WITHIN BUSINESS I WOULD LIKE AN ESTIMATE DAYS FOLLOWING RECEIPT OF PAYMENT. I NEED MORE INFORMATION / PLEASE CONTACT ME (CIRCLE ONE) ALLOW 10 ADDITIONAL BUSINESS DAYS IF PAYING BY PERSONAL CHECK. BY PHONE TIME FAX MAIL CUSTOM PARTS ARE NOT RETURNABLE. TO ORDER CALL FAX

60 QUALITY PAR ARTS BED WOOD DATA SHEET Board width measurements - measure from center of each bed strip to outside edge of wood floor. END VIEW OF TRUCK BED WITH 5 STRIPS & 6 BOARDS ( ) ( ) ( ) OVERALL WIDTH OF BED ( ) ( ) ( ) TYPE OF WOOD PINE OAK OVERALL LENGTH OF BOARDS: END VIEW OF TRUCK BED WITH 6 STRIPS & 7 BOARDS ( ) ( ) ( ) OVERALL WIDTH OF BED ( ) ( ) ( ) ( ) TYPE OF WOOD PINE OAK OVERALL LENGTH OF BOARDS: END VIEW OF TRUCK BED WITH 7 STRIPS & 8 BOARDS ( ) ( ) ( ) OVERALL WIDTH OF BED ( ) ( ) ( ) ( ) ( ) TYPE OF WOOD PINE OAK *** NOTICE: Our show quality oak boards are kiln dried and sanded to 3/4 thickness.*** Custom bed wood is non-refundable and non-returnable. We cannot make boards wider than 9" or longer than 107" THIS FORM IS TO BE USED FOR : (CHECK ONE) I AM PLACING AN ORDER IF YOU ARE PLACING AN ORDER CALL FOR SHIPPING CHARGES I WOULD LIKE AN ESTIMATE OVERALL LENGTH OF BOARDS: BED WOOD IS FOR: YEAR MAKE / MODEL LENGTH OF BOARDS: NAME: ADDRESS: HOW MAY WE CONTACT YOU? FAX ( ) 60 TO ORDER CALL FAX

61 MOULDINGS- We make most of these mouldings in Oklahoma City, USA. MAR-K maintains stock of many stainless and aluminum mouldings for the and pickups. Also available are the many special clips and fasteners needed to attach the mouldings for trucks. MAR-K supplies many of the replacement mouldings and clips when they are discontinued by, so you can rely on us to supply your needs. We stock lower body mouldings in woodgrain and black accents for Fleetsides, Blazers and Suburbans. See pages MOULDINGS NO CLIPS Rear upper Door Rear lower MAR K MOULDINGS 55-59/62-66 Many of the later model mouldings must be taped and painted with accent stripes to match original mouldings FLEETSIDE MOULDINGS Upper door Upper cab intermediate There are four stainless trims still available which fit around the two side windows, and the rear window. 55 2nd-59 Cab Mouldings without Clips Sold by the piece - clips not available. N/A is not available. C CAB TRIM DOOR TRIM LH/DR NO CLIPS... N/A C CAB TRIM DOOR TRIM RH/PA NO CLIPS... $41.50 ea C CAB TRIM REAR LOWER LH/DR NO CLIPS ea C CAB TRIM REAR LOWER RH/PA NO CLIPS ea C CAB TRIM REAR UPPER LH/DR NO CLIPS... N/A C CAB TRIM REAR UPPER RH/PA NO CLIPS ea REVEAL MLDG CAP (WINDSHIELD CLIP-4/TRUCK) ea MOULDING CLIPS FOR TRUCKS MOULDING CLIPS MAR-K offers many hard to find moulding clips. Clips are included for installation or may be purchased separately for replacement. Call our sales staff for individual clip prices. Upper bed Lower bed (Chevrolet) Lower cab intermediate (Chevrolet) Lower door (Chevrolet) Fender rear piece Fender front tip These aluminum mouldings are available by the piece or set. The trims are installed by clips which slide into the trim, then the trim is pressed or bolted on the truck. Complete clip kits are also available Fleetside Body Mouldings with Clips Sold as a set or by the piece - clips are included with both COMPLETE BODY SIDE-SHORT BED, CHEVY... $ set COMPLETE BODY SIDE-SHORT BED, C set COMPLETE BODY SIDE-LONG BED, CHEVY set COMPLETE BODY SIDE-LONG BED, C set K COMPLETE SIDE CLIPS -SHORT BED, CHEVY kit K COMPLETE SIDE CLIPS -SHORT BED, C kit K COMPLETE SIDE CLIPS -LONG BED, CHEVY kit K COMPLETE SIDE CLIPS -LONG BED, C kit FENDER FRONT TIP... $20.50 ea FENDER REAR PIECE ea LOWER DOOR LH/DR, CHEVROLET ea LOWER DOOR RH/PA, CHEVROLET ea LOWER CAB INTERMEDIATE, CHEVROLET ea LOWER BED-SHORT BED, CHEVROLET ea LOWER BED-LONG BED, CHEVROLET ea UPPER DOOR ea UPPER CAB INTERMEDIATE LH/DR ea UPPER CAB INTERMEDIATE RH/PA ea UPPER BED-SHORT BED ea UPPER BED-LONG BED ea TO ORDER CALL FAX

62 MOULDINGS SUBURBAN MOULDINGS MOULDINGS Upper tailgate outer Upper tailgate center Lower fender rear Lower fender wheel Lower Door Lower bed rear Lower bed wheel Lower bed front Lower cab intermediate Aluminum mouldings to accent the lower body lines of the Fleetside are sold by the set or piece. Attachment clips and hardware are included with each part Mouldings with Clips Sold as a set or by the piece - clips included with both COMPLETE BODY LOWER SIDE -SHORT BED... $ set COMPLETE BODY LOWER SIDE -LONG BED set K COMPLETE CLIPS LOWER SIDE-SHORT BED kit K COMPLETE CLIPS LOWER SIDE-LONG BED kit LOWER FENDER WHEEL LH/DR... $ ea LOWER FENDER WHEEL RH/PA ea LOWER DOOR LH/DR ea LOWER DOOR RH/PA ea LOWER CAB INTERMEDIATE LH/DR ea LOWER CAB INTERMEDIATE RH/PA ea LOWER BED FRONT LH/DR-SHORT BED ea LOWER BED FRONT RH/PA-SHORT BED ea LOWER BED FRONT LH/DR-LONG BED ea LOWER BED FRONT RH/PA-LONG BED ea LOWER BED WHEEL LH/DR ea LOWER BED WHEEL RH/PA ea LOWER BED REAR LH/DR-SHORT BED ea LOWER BED REAR RH/PA-SHORT BED ea LOWER BED REAR LH/DR-LONG BED ea LOWER BED REAR RH/PA-LONG BED ea UPPER TAILGATE CENTER ea UPPER TAILGATE OUTER LH/DR ea UPPER TAILGATE OUTER RH/PA ea Fleetside Upper Tailgate Custom Full Width Custom, full-width, aluminum moulding that fits along the upper portion of the tailgate. Replaces the upper left hand, right hand and center mouldings for a custom look. Use this piece with a tailgate cover or other custom applications where the handle hole on the outside of the tailgate has been eliminated. Includes clips for attachment CUSTOM FULL WIDTH WITH CLIPS... $55.00 ea Lower fender front Lower door Aluminum mouldings to accent the lower body lines of the Suburban are sold by the set or piece. Attachment clips and hardware are included with each part Suburban Mouldings with and without Clips Sold as a set - clips included except for lower bed front and rear (4 pcs) COMPLETE BODY LOWER SIDE -SHORT BED... $ set Sold by the piece - clips included LOWER FENDER WHEEL LH/DR... $ ea LOWER FENDER WHEEL RH/PA ea LOWER DOOR LH/DR ea LOWER DOOR RH/PA ea LOWER BED FRONT 3RD DOOR RH/PA ea LOWER BED WHEEL LH/DR ea LOWER BED WHEEL RH/PA ea Sold by the piece - clips not available. C LOWER BED FRONT LH/DR... $35.50 ea C LOWER BED FRONT BEHIND 3RD DOOR RH/PA ea C LOWER BED REAR LH/DR ea C LOWER BED REAR RH/PA ea Rear Cab DR REAR CAB MOULDINGS Rear Cab Joiner Clip Rear Cab PA Lower bed front REAR CAB MOULDINGS These stainless steel mouldings go on the back of the cab, usually on two-toned painted trucks where the two colors meet. Sold by the set or piece, specify driver, passenger, or joiner clip. Six nylon attachment clips are included with each trim. The small screw-in studs are used for trucks without the original welded studs for attachment and are sold separately Rear Cab Mouldings COMPLETE SET WITH CLIPS... $71.50 set REAR CAB LH/DR WITH CLIPS ea REAR CAB RH/PA WITH CLIPS ea REAR CAB JOINER CLIP ea C SCREW-IN STUD ea 62 TO ORDER CALL FAX

63 67-68 PANEL TRUCK MOULDINGS MAR K MOULDINGS FLEETSIDE MOULDINGS Lower tailgate Upper tailgate outer Upper tailgate center Taillight Lower fender rear Lower door Lower fender front Aluminum mouldings to accent the lower body lines of the Panel Truck are sold by the piece. Attachment clips and hardware are included with each part Panel Truck Mouldings with and without Clips Sold as a set - clips included except for lower bed front and rear (4 pcs) COMPLETE BODY LOWER SIDE -SHORT BED... $ set Sold by the piece - clips included LOWER FENDER WHEEL LH/DR... $ ea LOWER FENDER WHEEL RH/PA ea LOWER DOOR LH/DR ea LOWER DOOR RH/PA ea LOWER BED WHEEL LH/DR ea LOWER BED WHEEL RH/PA ea Sold by the piece - clips not available. C LOWER BED FRONT LH/DR... $35.50 ea C LOWER BED FRONT RH/PA ea C LOWER BED REAR LH/DR ea C LOWER BED REAR RH/PA ea BOLT ON VS ADHESIVE CLIPS For Fleetsides, side mouldings are attached entirely by screws or metal clips inside the mouldings. Each clip requires a hole drilled in the body and is held in the hole by either a stud and nut or a "push-in" snap type retainer. In the model years, side mouldings are attached by a combination of metal clips and plastic retainers with adhesive. The metal clips are usually at the ends of the mouldings and the plastic retainers in the center. Holes are not drilled for the plastic retainers but are needed for the metal clips. MAR-K makes both types of moulding attachments. The mouldings come with clips according to the year specified. Prices may vary depending on the type of clip kit and the clips included LOWER BODY MOULDINGS Lower bed front BLACK ACCENT FINISH WITH "BOLT ON" CLIPS Lower fender front Upper fender Lower door Lower fender rear Lower bed rear Upper bed Lower bed front Upper cab intermediate Lower cab intermediate Upper door MAR-K makes upper and lower side body and tailgate mouldings. Plastic or metal attachment clips are included with each part or may be purchased separately for replacement. See below for an explanation on bolt on vs. adhesive clips Mouldings with Clips Sold as a set or by the piece - clips included with both LOWER BODY -BLACK SHORT BED... $ set LOWER BODY -WOOD SHORT BED set LOWER BODY -BLACK LONG BED set LOWER BODY -WOOD LONG BED set LOWER BODY -BLACK LONG W/TLBX set LOWER BODY -WOOD LONG W/TLBX set LOWER BODY -BLACK LONGHORN set LOWER BODY -WOOD LONGHORN set LOWER BODY -BLACK LHORN W/TLBX set LOWER BODY -WOOD LHORN W/TLBX set LOWER BODY -BLACK SHORT BED set LOWER BODY -WOOD SHORT BED set LOWER BODY -BLACK LONG BED set LOWER BODY -WOOD LONG BED set LOWER BODY -BLACK LONG W/TLBX set LOWER BODY -WOOD LONG W/TLBX set LOWER BODY -BLACK LONGHORN set LOWER BODY -WOOD LONGHORN set LOWER BODY -BLACK LHORN W/TLBX set LOWER BODY -WOOD LHORN W/TLBX set UPPER BODY SIDE SHORT BED set UPPER BODY SIDE LONG BED set UPPER BODY SIDE LONGHORN set UPPER BODY SIDE SHORT BED set UPPER BODY SIDE LONG BED set UPPER BODY SIDE LONGHORN set K CLIPS FOR UPPER SIDE SHORT BED kit K CLIPS FOR UPPER SIDE LONG BED kit K CLIPS FOR UPPER SIDE LONGHORN kit K CLIPS FOR UPPER SIDE SHORT kit K CLIPS FOR UPPER SIDE LONG kit K CLIPS FOR UPPER SIDE LONGHORN kit K CLIPS FOR LWR BODY SHORT BED kit K CLIPS FOR LWR BODY LONG BED kit K CLIPS FOR LWR BODY LONG W/TLBX kit TO ORDER CALL FAX

64 MOULDINGS Mouldings with Clips (continued) Sold as a set or by the piece - clips included with both *Lower Fender Front and Lower Cab Intermediate Mouldings purchased from an outside vendor K CLIPS FOR LWR BODY LONGHORN... $ kit K CLIPS FOR LWR BODY LHORN W/TLBX kit K CLIPS FOR LWR BODY SHORT kit K CLIPS FOR LWR BODY LONG kit K CLIPS FOR LWR BODY LONG W/TLBX kit K CLIPS FOR LWR BODY LONGHORN kit K CLIPS FOR LWR BODY LHORN W/TLBX kit LOWER FENDER FRONT LH/DR-BLACK* ea LOWER FENDER FRONT RH/PA-BLACK* ea LOWER FENDER FRONT LH/DR-WOOD* ea LOWER FENDER FRONT RH/PA-WOOD* ea LOWER FENDER REAR LH/DR-BLACK ea LOWER FENDER REAR RH/PA-BLACK ea LOWER FENDER REAR LH/DR-WOOD ea LOWER FENDER REAR RH/PA-WOOD ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER DOOR LH/DR-WOOD ea LOWER DOOR RH/PA-WOOD ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER DOOR LH/DR-WOOD ea LOWER DOOR RH/PA-WOOD ea LOWER CAB INTERMEDIATE LH/DR-BLACK* ea LOWER CAB INTERMEDIATE RH/PA-BLACK* ea LOWER CAB INTERMEDIATE LH/DR-WOOD* ea LOWER CAB INTERMEDIATE RH/PA-WOOD* ea LOWER BED FRONT LH/DR-BL SHORT ea LOWER BED FRONT RH/PA-BL SHORT ea LOWER BED FRONT LH/DR-WD SHORT ea LOWER BED FRONT RH/PA-WD SHORT ea LOWER BED FRONT LH/DR-BL LONG ea LOWER BED FRONT RH/PA-BL LONG ea LOWER BED FRONT LH/DR-WD LONG ea LOWER BED FRONT RH/PA-WD LONG ea LOWER BED FRONT LH/DR-BL LHRN ea LOWER BED FRONT RH/PA-BL LHRN ea LOWER BED FRONT LH/DR-WD LHRN ea LOWER BED FRONT RH/PA-WD LHRN ea LOWER BED FRONT LH/DR-BL SHORT ea LOWER BED FRONT RH/PA-BL SHORT ea LOWER BED FRONT LH/DR-WD SHORT ea LOWER BED FRONT RH/PA-WD SHORT ea LOWER BED FRONT LH/DR-BL LONG ea LOWER BED FRONT RH/PA-BL LONG ea BOLT ON VS ADHESIVE CLIPS For Fleetsides, side mouldings are attached entirely by screws or metal clips inside the mouldings. Each clip requires a hole drilled in the body and is held in the hole by either a stud and nut or a "push-in" snap type retainer. In the model years, side mouldings are attached by a combination of metal clips and plastic retainers with adhesive. The metal clips are usually at the ends of the mouldings and the plastic retainers in the center. Holes are not drilled for the plastic retainers but are needed for the metal clips. MAR-K makes both types of moulding attachments. The mouldings come with clips according to the year specified. Prices may vary depending on the type of clip kit and the clips included Mouldings with Clips (continued) Sold by the piece - clips included with each trim LOWER BED FRONT LH/DR-WD LONG... $60.50 ea LOWER BED FRONT RH/PA-WD LONG ea LOWER BED FRONT LH/DR-BL LHRN ea LOWER BED FRONT RH/PA-BL LHRN ea LOWER BED FRONT LH/DR-WD LHRN ea LOWER BED FRONT RH/PA-WD LHRN ea LOWER BED REAR LH/DR-BL SHORT ea LOWER BED REAR RH/PA-BL SHORT ea LOWER BED REAR LH/DR-WD SHORT ea LOWER BED REAR RH/PA-WD SHORT ea LOWER BED REAR LH/DR-BL LONG/LHN ea LOWER BED REAR RH/PA-BL LONG/LHN ea LOWER BED REAR LH/DR-WD LONG/LHN ea LOWER BED REAR RH/PA-WD LONG/LHN ea LOWER BED REAR LH/DR-BL SHORT ea LOWER BED REAR RH/PA-BL SHORT ea LOWER BED REAR LH/DR-WD SHORT ea LOWER BED REAR RH/PA-WD SHORT ea LOWER BED REAR LH/DR-BL LONG/LHN ea LOWER BED REAR RH/PA-BL LONG/LHN ea LOWER BED REAR LH/DR-WD LONG/LHN ea LOWER BED REAR RH/PA-WD LONG/LHN ea UPPER FENDER RH/LH ea UPPER DOOR LH/DR ea UPPER DOOR RH/PA ea UPPER DOOR LH/DR ea UPPER DOOR RH/PA ea UPPER CAB INTERMEDIATE LH/DR ea UPPER CAB INTERMEDIATE RH/PA ea UPPER BED SHORT BED ea UPPER BED LONG BED ea UPPER BED LONGHORN ea UPPER BED SHORT BED ea UPPER BED LONG BED ea UPPER BED LONGHORN ea LOWER TAILGATE ea UPPER TAILGATE CENTER ea UPPER TAILGATE OUTER LH/DR ea UPPER TAILGATE OUTER RH/PA ea TAILLIGHT LH/DR ea TAILLIGHT RH/PA ea TOOLBOX MOULDINGS BLACK ACCENT FINISH Lower bed side mouldings for Chevy and C are available from MAR-K. These parts include the lower mouldings for the long bed and Longhorn with the optional passenger side tool box as shown above. Available in black or woodgrain finish. WOODGRAIN ACCENT FINISH LOWER FRONT OF TOOLBOX LONG BED-BLACK... $33.00 ea LOWER FRONT OF TOOLBOX LONG BED-WOOD ea LOWER FRONT OF TOOLBOX LONGHORN-BLACK ea LOWER FRONT OF TOOLBOX LONGHORN-WOOD ea LOWER REAR OF TOOLBOX LONG/LHRN-BK ea LOWER REAR OF TOOLBOX LONG/LHRN-WD ea LOWER TOOLBOX LID LONG/LHRN-BLACK ea LOWER TOOLBOX LID LONG/LHRN-WOOD ea 64 TO ORDER CALL FAX

65 69-72 BLAZER MOULDINGS Lower fender front Lower door Lower fender rear Lower body rear Lower body front MAR-K side trims have black painted or wood grain accents. Plastic and metal attachment clips are included with each part or may be purchased separately for replacement. See page 63 for an explanation on bolt on vs. adhesive clips Blazer Mouldings with Clips Sold as a set or by the piece - clips included with both *Lower Fender Front Moulding purchased from an outside vendor COMPLETE LOWER SIDE-BLACK $ set COMPLETE LOWER SIDE-WOOD set COMPLETE LOWER SIDE-BLACK set COMPLETE LOWER SIDE-WOOD set K COMPLETE CLIPS LOWER SIDE kit K COMPLETE CLIPS LOWER SIDE kit LOWER FENDER FRONT LH/DR-BLACK*... $38.50 ea LOWER FENDER FRONT RH/PA-BLACK* ea LOWER FENDER FRONT LH/DR-WOOD* ea LOWER FENDER FRONT RH/PA-WOOD* ea LOWER FENDER REAR LH/DR-BLACK ea LOWER FENDER REAR RH/PA-BLACK ea LOWER FENDER REAR LH/DR-WOOD ea LOWER FENDER REAR RH/PA-WOOD ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER DOOR LH/DR-WOOD ea LOWER DOOR RH/PA-WOOD ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER DOOR LH/DR-WOOD ea LOWER DOOR RH/PA-WOOD ea LOWER BODY FRONT LH/DR-BLACK ea LOWER BODY FRONT RH/PA-BLACK ea LOWER BODY FRONT LH/DR-WOOD ea LOWER BODY FRONT RH/PA-WOOD ea LOWER BODY FRONT LH/DR-BLACK ea LOWER BODY FRONT RH/PA-BLACK ea LOWER BODY FRONT LH/DR-WOOD ea LOWER BODY FRONT RH/PA-WOOD ea LOWER BODY REAR LH/DR-BLACK ea LOWER BODY REAR RH/PA-BLACK ea LOWER BODY REAR LH/DR-WOOD ea LOWER BODY REAR RH/PA-WOOD ea LOWER BODY REAR LH/DR-BLACK ea LOWER BODY REAR RH/PA-BLACK ea LOWER BODY REAR LH/DR-WOOD ea LOWER BODY REAR RH/PA-WOOD ea LOWER TAILGATE ea UPPER TAILGATE CENTER ea UPPER TAILGATE OUTER LH/DR ea UPPER TAILGATE OUTER RH/PA ea TAILLIGHT LH/DR ea TAILLIGHT RH/PA ea Lower fender front MAR K MOULDINGS CUSTOM STYLE BLAZER MOULDINGS Custom aluminum moulding set for the Chevy Blazer or C Jimmy, with the front end - fenders, hood, and grille. This set includes the front fenders, doors, front bed, rear wheel arch, and rear quarters in the style of trim. Sold as a set - clips and hardware included COMPLETE LOWER SIDE BODY $ set SUBURBAN MOULDINGS Lower door Lower fender rear Lower body rear Lower body front These include the lower side door and body mouldings and the passenger rear door moulding. MAR-K trims have black painted accents. Plastic and metal attachment clips are included with each part or may be purchased separately for replacement. See page 63 for an explanation on bolt on vs. adhesive clips Suburban Mouldings with Clips Sold as a set or by the piece - clips included with both. *Lower Fender Front Moulding purchased from an outside vendor COMPLETE LOWER SIDE-BLACK $ set COMPLETE LOWER SIDE-BLACK set K COMPLETE CLIPS LOWER SIDE kit K COMPLETE CLIPS LOWER SIDE kit LOWER FENDER FRONT LH/DR-BLACK*... $38.50 ea LOWER FENDER FRONT RH/PA-BLACK* ea LOWER FENDER REAR LH/DR-BLACK ea LOWER FENDER REAR RH/PA-BLACK ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER DOOR LH/DR-BLACK ea LOWER DOOR RH/PA-BLACK ea LOWER BODY FRONT LH/DR-BLACK ea LOWER BODY FRONT RH/PA-BLACK ea LOWER BODY FRONT LH/DR-BLACK ea LOWER BODY FRONT RH/PA-BLACK ea LOWER BODY REAR LH/DR-BLACK ea LOWER BODY REAR RH/PA-BLACK ea LOWER BODY REAR LH/DR-BLACK ea LOWER BODY REAR RH/PA-BLACK ea LOWER REAR DOOR RH/PA-BLACK ea LOWER REAR DOOR RH/PA-BLACK ea TO ORDER CALL FAX

66 36-38 C PARTS, BOOKS & MANUALS C HOOD SIDE TRIM Steel pieces made to go down the side of the hood on the C truck. These are unpainted steel parts that should be chrome plated or painted to match the other trim on your truck. Includes holes punched for mounting these pieces to the hood side. Made of 18 gage steel as original. Requires 10 pieces for a complete set for a 36. Requires 8 pieces for a complete set for a 37. Made by MAR-K in Oklahoma City, USA C HOOD SIDE TRIM Sold by the piece - choose 10 for a 36 and 8 for a HOOD SIDE TRIM C... $10.00 ea C GRILLE BARS Steel pieces made to go down the center and vertical portions of the grille on the C trucks. This is an unpainted steel part that should be chrome plated or painted to match the other grille pieces on your truck. Made of 22 gage steel as original. Made by MAR-K in Oklahoma City, USA. 37 C GRILLE BARS Sold by the piece CENTER VERTICAL BAR 20 3/8" (1/TRUCK)... $30.00 ea VERTICAL BAR with hole 24" (2/TRUCK)... $21.00 ea VERTICAL BAR no hole 24" (4/TRUCK)... $19.00 ea 38 C GRILLE BARS Sold by the piece CENTER VERTICAL BAR 21 3/8" (1/TRUCK)... $30.00 ea VERTICAL BAR with hole 25 1/2" (2/TRUCK)... $21.00 ea VERTICAL BAR no hole 25 1/2" (4/TRUCK)... $19.00 ea ASSEMBLY MANUALS These assembly manuals contain copies of original drawings and instructions used to assemble the trucks on the factory assembly lines. BOOKS For a detailed description of each book, log on to our website and type in the part numbers under "Order by Part Number." st Assembly Manual... $35.00 ea nd-59 Assembly Manual ea Assembly Manual ea Assembly Manual ea Chevrolet and C Light Truck Owners Bible. $34.95 ea Ford Pickup Color History ea 66 TO ORDER CALL FAX

67 STEPSIDE TAILLIGHT PARTS ST STEPSIDE Stepside taillight assemblies are available in black with chrome around the plastic lenses. Includes 6 volt bulbs only and hardware st and Stepside assemblies are available with black painted steel housings, stainless rims and red plastic lenses. Can be used as brake lights and turn signals but not as backup lights. Includes 12 volt bulbs and hardware. Taillight Assemblies DOES NOT INCLUDE TAILLIGHT BRACKET STEP DR/LH... $35.00 ea STEP PA/RH ea B ST STEP DR/PA ea B 55 2ND-59 STEP DR/PA ea B STEP DR/PA ea TAILLIGHT PARTS - These are taillights and parts made to replace the MAR K TAILLIGHT PARTS original taillights. Taillight assemblies include 6 volt or 12 volt bulbs, where noted. These lights are used as brake lights and turn signals but not as backup lights. Lenses and brackets sold separately. These are purchased from an outside vendor. For custom billet lights for flat panel areas, see page 75. DODGE Dodge Stepside and Powerwagon taillight brackets in unpainted steel only, not available in chrome. Made by MAR-K in Oklahoma City, USA. FLEETSIDE TAILLIGHT PARTS Fleetside replacement lenses are made of red plastic. Bezels for the Fleetsides are made of anodized aluminum. Taillight Bezels FLEET DR/PA... $12.00 ea Taillight Lenses F FLEET DR/PA RED PLASTIC... $8.00 ea Taillight Gaskets - pair is for 2 taillights F CORK GASKETS FOR FLEET DR/PA. $5.00 pr TAILLIGHT BRACKETS Black painted steel taillight mounting brackets are available to mount the taillight assemblies. Brackets come with all holes for installation Drivers' Side bracket includes license plate bracket. 55 2ND-66 STEPSIDE TAILLIGHT BRACKET BLACK PAINTED STEEL ONLY - NOT AVAILABLE IN CHROME STEP DR/LH WITH LICENSE BRKT*. $35.00 ea STEP PA/RH NO LICENSE BRKT ea STEP DR/LH WITH LICENSE BRKT* ea STEP PA/RH NO LICENSE BRKT ea B ST STEP DR/LH ea B ST STEP PA/RH ea B 55 2ND-66 STEP DR/LH ea B 55 2ND-66 STEP PA/RH ea B STEP DR/LH ea B STEP PA/RH ea *BACK PLATE IS AVAILABLE FOR USE WITH THESE BRACKETS. Taillight Brackets DODGE STEPSIDE... $15.00 ea DODGE POWERWAGON ea BACK PLATE Designed to work with license plate frames, the back plate covers up the back part of your license plate when it hangs down below your truck BACK PLATE... $6.00 ea Looking for more information about MAR-K parts? Just go to our website: We have pictures, descriptions and prices for each part and a complete technical library available online anytime! Installation instructions are also available online for most MAR-K parts! TO ORDER CALL FAX

68 ROLL PANS CHEVY/C Rear Pans are formed in this press brake. Custom tools needed to make parts are designed and built at MAR-K. WHY MAR-K? The MAR-K Stepside steel rear pan is unique in that it mounts up on the face of the rear cross sill, instead of beneath it. This makes our pan align with the tailgate instead of the rear sill. MAR-K designed this rear pan to look best on Stepside trucks STEPSIDE SMOOTH WITH BOX Stepside CHEVY SHORT STEP SMOOTH NO BOX*... $95.00 ea CHEVY SHORT STEP SMOOTH WITH BOX ea CHEVY SHORT STEP SMOOTH WITH BOX ea CHEVY SHORT STEP LVRS - 4 ROW W/ BOX* ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW WITH BOX ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX ea LOUVRES - 4 ROW WITH BOX ea SHORT BED SMOOTH NO BOX ea SHORT BED SMOOTH WITH BOX ea SHORT BED LOUVRES - 4 ROW WITH BOX ea LONG BED 89" SMOOTH NO BOX ea LONG BED 89" SMOOTH WITH BOX ea LONG BED 89" LOUVRES - 4 ROW W/ BOX ea LONG BED 97" SMOOTH NO BOX ea LONG BED 97" SMOOTH WITH BOX ea LONG BED 97" LOUVRES - 4 ROW NO BOX* ea LONG BED 97" LOUVRES - 4 ROW W/ BOX ea REAR ROLL PANS - SMOOTH your truck with a MAR-K steel rear roll pan. The rear pan takes the place of the back bumper for a smooth effect. MAR-K has manufactured top quality roll pans for many years, and the attention to detail is what puts ours above the rest. Our pans are made from 18 gage electro-galvanized steel for rust prevention, and the pans will bolt or weld on depending on your desired look. We pre-drill the mounting holes in the pans, and a 'bolt-on' hardware kit is included at no extra charge. Our pans are available with or without a license tag indention (tag box), and louvres are available as well. Rear pans are available for many and Ford trucks. Made by MAR-K in Oklahoma City, USA! General rear pan installation instructions on pg. 71. TECH TIP: REAR CROSS SILL MODIFICATION - The installation of a MAR-K steel rear pan with license indention requires modification to the rear cross sill. Since the "tag box" is indented, a space will need to be cut in the rear cross sill for clearance. The rear pan with a tag box will not fit properly unless this is done. Instructions are included with the rear pan. Fleetside SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 4 ROW WITH BOX ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX* ea LOUVRES - 4 ROW WITH BOX ea FLEETSIDE REAR PANS MUST BE WELDED ON. FLEETSIDE REAR PANS CONTINUED ON PAGE 69. ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES TECH TIP: BOLT-ON VS WELD-ON Installation of rear pans can be done in different ways. Most rear pans bolt to the rear cross sill, and then it is optional as to whether or not you take the customization that step further and weld the seams shut for a completely smooth look. You can see the difference in the looks; either way, they look smooth and sweet! Complete instructions are included. 68 TO ORDER CALL FAX

69 ROLL PANS CHEVY/C FLEETSIDE SMOOTH NO BOX Fleetside (continued) SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 4 ROW WITH BOX ea FLEETSIDE SMOOTH NO BOX SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 4 ROW WITH BOX ea LOUVRES - 6 ROW WITH BOX ea S-10/S LOUVRES - 4 ROW WITH BOX* ea LOUVRES - 7 ROW NO BOX * ea FLEETSIDE SMOOTH WITH BOX Fleetside SMOOTH NO BOX*... $ ea SMOOTH WITH BOX ea FOR SPORTSIDES Exclusively a MAR-K design: The Sportside steel rear pan with exhaust outlets. This innovative design takes advantage of the factory cut out portion of the bed with a symmetrically cut out portion of the roll pan for a perfect exhaust outlet. Chrome exhaust tips can be used with your modified exhaust system for a new look that is very simple to achieve! As always, this pan is made of quality 18 gage steel and comes with step by step bolt-on instructions. Bolt-on hardware is included at no additional charge. Louvres: All louvres will line up with those in tailgates and tailgate covers. The louvres are 4" wide and have 6" center spacing (6" measuring horizontally from the center of one louvre to the center of the next). License Frame Back Plate and Flip-up License Plate are all available on page SPORTSIDE SMOOTH WITH BOX AND EXHAUST OUTLETS Sportside with Exhaust Outlets SMOOTH WITH BOX* ea ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES FRONT ROLL PAN - The front pan is a MAR-K specialty part. Constructed of 18-gage steel, this pan takes the place of the front bumper for a slick smooth look. The front extensions of the truck frame must be shortened approximately 2" before installation. The cutting of the frame should be performed by someone experienced with welding or cutting. Assembly instructions are included with each front pan. Be sure to check with your local and state laws concerning legal requirements for front pans and license plates. Made in Oklahoma City, USA! FRONT PAN STEPSIDE/FLEETSIDE... $ ea TO ORDER CALL FAX

70 ROLL PANS FLARESIDE SMOOTH WITH BOX Short Bed Flareside SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 4 ROW WITH BOX ea Flareside is same as Stepside Rear Pans get their shape from custom-built tools in this press. MAR-K makes dozens of different types of rear pans from this machine FULL HEIGHT REAR PANS FULL HEIGHT SMOOTH WITH BOX The "full height" rear pans for Ford Short bed Flareside (stepside) trucks are for those customers who prefer a larger, taller rear pan. The "Full Height" pan extends down about 2" further than our standard pan and sits forward to completely fill the space below the bed sides between the rear fenders and the back of the bed. It may be installed without cutting the rear sill as the recessed license plate is below the rear sill. Available in smooth or with 4 rows of louvres FULL HEIGHT SMOOTH NO BOX... $ ea FULL HEIGHT SMOOTH WITH BOX ea FULL HEIGHT LOUVRES - 4 ROW W/BOX ea Matt Perez 71 Ford Styleside Rear Pan Styleside SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 9 ROW NO BOX* ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX* ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX* ea LOUVRES - 6 ROW WITH BOX* ea SMOOTH NO BOX ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX* ea LOUVRES - 4 ROW WITH BOX * ea LOUVRES - 9 ROW NO BOX* ea Styleside is same as Fleetside STYLESIDE SMOOTH WITH BOX SMOOTH NO BOX... $ ea SMOOTH WITH BOX ea LOUVRES - 4 ROW NO BOX* ea LOUVRES - 4 ROW WITH BOX* ea LOUVRES - 9 ROW NO BOX* ea Styleside is same as Fleetside Don't for orget et MAR-K parts are made in Oklahoma City, USA! ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES License Frame Back Plate and Flip-up Licence Plate are all available on page TO ORDER CALL FAX

71 TECH TIP: GENERAL MAR-K REAR PAN INSTALLATION TIPS Instructions including measurements and other helpful hints specific to your year series are included with all pans. These general instructions give you an idea of how the rear pans are installed. Terry Palmer Bakersfield, CA 57 Chevy Short Stepside 1. The first step is to remove the bumper and brackets. 2. Hold the pan up in the space between the bed sides and determine placement. 3. Be sure to check that the tailgate will open and shut to your satisfaction before securing the pan to the rear sill. 4. Holes are predrilled in the pans for help in bolting it to the sill. If you are planning to weld the seams, (some models will require this) tack weld each end. 5. Check the alignment before completely welding the seam. 6. Fill the welded seams with body filler or lead, and grind seam to the body contour. 7. If you are bolting the pan at the seams, brackets are included for attachment to the bed side. MAR K ROLL PAN DODGE & ACCESSORIES The license tag indention or "box" is being made on this rear pan by punching the hole and bending the area below it to make room for the tag box to be welded on. DODGE Dakota LOUVRES - 4 ROW NO BOX * ea LOUVRES - 4 ROW WITH BOX* ea LOUVRES - 4 ROW W/ BOX TAG LT HOLES* ea LOUVRES - 8 ROW NO BOX* ea ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES REAR PAN TAG BOX ACCESSORIES LOUVRES: The louvres are 4" wide and have 6" center spacing (6" measuring horizontally from the center of one louvre to the center of the next). MAR-K's rear pans with louvres are made to line up with the louvre pattern in our tailgate and tailgate covers for a great custom look! See pages for MAR-K tailgate covers and weld-ins. FLIP-UP LICENSE PLATE Designed to work with a hidden hitch and MAR-K rear pans. It allows the license plate to be rotated up out of the way when using the hidden hitch receiver FLIP UP PLATE... $55.00 ea BACK PLATE Designed to work with license plate frames, the back plate covers up the back part of your license plate when it hangs down below your truck BACK PLATE... $6.00 ea TO ORDER CALL FAX

72 TAILGATE COVERS & WELD-INS Louvres are punched in many of MAR-K parts like rear pans and tailgate covers using this louvre press. FULL COVER - The full tailgate cover is made of electro-galvanized steel and covers the entire outside portion of the tailgate. MAR-K designed the full covers to perfectly match the body lines of each specific truck. The full cover will give your truck the custom SMOOTH look. Tailgates with latch handles will need a handle relocator kit in order to open the tailgate from the inside of the bed. The full cover is available smooth, bowtie embossed, or with louvres. It is available for many, Ford and Dodge trucks. Made by MAR-K in Oklahoma City, USA! STEPSIDE FULL COVER LOUVRES - 4 ROW Stepside FULL COVER SMOOTH... $ ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 7 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea FULL COVER SMOOTH ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 7 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea FULL COVER SMOOTH ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 7 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea WELD-IN PANEL - This is a panel, also made of electro-galvanized steel, that is designed to cover the indented portion of the tailgate to give it a smooth look. MAR-K offers the weld-in panel as an alternative to the full tailgate cover for some trucks. For some trucks, the weld-in panel may be ordered with a handle hole cut out to retain the use of the latch handle from the outside of the tailgate. A completely smooth weld-in panel may also be used with a MAR-K handle relocator kit to provide a smooth outer surface with access to the latch handle from the inside of the tailgate. See page 73. TECH TIP: Full tailgate covers and weld-in panels are installed by welding. Full covers curve up over the top of the tailgate and down under the bottom. The weld-in panels weld on to the tailgate beginning at the top of the indented area (usually the location of the handle). Some panels curve under the bottom of the tailgate, while others insert into the indention only. This depends on the shape and location of the indention on the tailgate FLEETSIDE WELD-IN SMOOTH W/HOLE Fleetside FULL COVER SMOOTH... $ ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 9 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea WELD-IN SMOOTH NO HOLE* ea WELD-IN EMBOSSED BOWTIE NO HOLE* ea FULL COVER SMOOTH ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 9 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea WELD-IN SMOOTH NO HOLE* ea WELD-IN SMOOTH WITH HOLE* ea WELD-IN LOUVRES - BOWTIE WITH HOLE ea WELD-IN EMBOSSED BOWTIE NO HOLE ea ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES MAR-K parts with the embossed Bowtie emblem including the embossed Bowtie tailgate covers and weldins are Official Licensed Products supplied by MAR-K Specialized Mfg., an authorized General Motors Licensee. These are made in Oklahoma City, USA. 72 TO ORDER CALL FAX

73 TAILGATE COVERS & WELD-INS FLEETSIDE FULL COVER LOUVRES - "BOWTIE" Fleetside (continued) FULL COVER SMOOTH... $ ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 9 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea FULL COVER SMOOTH ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 9 ROW ea FULL COVER LOUVRES - BOWTIE ea FULL COVER EMBOSSED BOWTIE ea WELD-IN SMOOTH WITH HOLE* ea WELD-IN LOUVRES - 4 ROW WITH HOLE* ea WELD-IN LOUVRES - 9 ROW WITH HOLE* ea WELD-IN LOUVRES - BOWTIE WITH HOLE* ea WELD-IN EMBOSSED BOWTIE NO HOLE* ea WELD-IN SMOOTH NO HOLE * ea WELD-IN LOUVRES - 4 ROW NO HOLE* ea WELD-IN SMOOTH WITH HOLE * ea WELD-IN LOUVRES - BOWTIE WITH HOLE* ea WELD-IN SMOOTH NO HOLE * ea WELD-IN EMBOSSED BOWTIE NO HOLE* ea S-10/S WELD-IN SMOOTH NO HOLE*... $20.00 ea WELD-IN LOUVRES - 4 ROW NO HOLE* ea WELD-IN SMOOTH WITH HOLE* ea WELD-IN LOUVRES - 7 ROW WITH HOLE* ea WELD-IN LOUVRES - BOWTIE WITH HOLE* ea MAR-K HANDLE RELOCATOR KITS FLEETSIDE Reverse your tailgate latch to the inside of the bed with our handle relocator kit. Some applications utilize the original latch handle, while others include a new handle and latch rods. Either way, your kit will come with all parts needed, installation hardware and complete instructions and templates. Some trucks already have a smooth tailgate, therefore a tailgate cover is unnecessary. For these models, an outside filler plate is included in the kit to fill in the space where the handle was located. This gives the tailgate a completely smooth look. Made by MAR-K in Oklahoma City, USA! Flareside (Stepside) Short Bed FULL COVER SMOOTH... $ ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 7 ROW ea Flareside Short Bed OR Long Bed FULL COVER SMOOTH... $ ea FULL COVER LOUVRES - 4 ROW ea FULL COVER LOUVRES - 8 ROW ea Styleside (Wide Bed) WELD-IN SMOOTH NO HOLE* ea DODGE DAKOTA FULL COVER LOUVRES - 4 ROW*... $ ea ITEMS WITH * ARE DISCONTINUED AND HAVE REDUCED PRICES AND LIMITED QUANTITIES LOUVRES: All louvres in MAR-K tailgates and tailgate covers are made to line up with those in our rear pans. The louvres are 4" wide and have 6" center spacing (6" measuring horizontally from the center of one louvre to the center of the next). See pages for rear pans. Fleetside TAILGATE HANDLE RELOCATOR *... $ kit TAILGATE HANDLE RELOCATOR * kit TAILGATE HANDLE RELOCATOR * kit TAILGATE HANDLE RELOCATOR kit C OUTER FILLER PANEL ONLY ea Flareside (Stepside) TAILGATE HANDLE RELOCATOR... $44.00 kit Wide Bed TAILGATE HANDLE RELOCATOR *... $ kit TAILGATE HANDLE RELOCATOR * kit TAILGATE HANDLE RELOCATOR * kit TAILGATE HANDLE RELOCATOR kit DODGE Dakota TAILGATE HANDLE RELOCATOR... $20.00 kit PLEASE NOTE All the tailgate handle relocator kits marked with an asterisk (*) include a new handle with the kit. For those kits that do not include a handle, you must use the original handle. TO ORDER CALL FAX

74 TAILGATE LATCHES & LINKS ROTARY STYLE TAILGATE LATCHES AND STAINLESS OR STEEL LINK ASSEMBLIES MAR-K now makes a kit for installing the hidden rotary style latches and link assemblies into a stock Ford tailgate. Adapter panel is made of 16 gage electro-galvanized steel and link assemblies are available in brightly polished stainless steel or zinc-plated steel. Includes customizing kit for your tailgate and complete instructions. Requires modification to the tailgate and bed sides. Made by MAR-K in Oklahoma City, USA. Flareside (Stepside) S SHORT FLARESIDE STAINLESS... $ pr SHORT FLARESIDE STEEL pr S SHORT/53-87 LONG FLARE STAINLESS pr SHORT/53-87 LONG FLARE STEEL pr TOOLS TO HELP INSTALL 17/32" DRILL BIT: It is used in the installation of MAR-K Tailgate Link Assemblies for Dodge Highside Stepside and Ford Flareside trucks and tailgates with hidden latch and link. 5/8" HOLE SAW: This is used in the installation of MAR-K hidden latches on Stepside, Fleetside and Ford Flareside trucks.the tool is complete with hole saw, arbor, and 1/4" pilot drill. BED SIDE MODIFICATION KIT: Kit used to install MAR-K link assembly on some Fleetside trucks. The original bracket attached to the bed sides that the pivot bolt threads into must be removed. On most trucks this bracket is bolted in place from the factory. Some trucks however, the original bracket may have been welded in place. If this is the case, then you need the bed side modification kit. Tools to Help Install /32" DRILL BIT... $30.00 ea /8" HOLE SAW ea BEDSIDE MODIFICATION KIT kit TECH TIP: If a tailgate cover is to be used with your tailgate link assembly, be sure to install the link assembly before the tailgate cover. Once the tailgate cover is installed, the fasteners holding the pivot bracket to the tailgate ends are not accessible. The bolts or nuts should be welded to the tailgate end so that the link assembly can be removed if needed after the tailgate cover has been installed. TAILGATE LINK ASSEMBLIES FOR, AND DODGE IN STAINLESS OR STEEL! MAR-K makes tailgate link assemblies for custom applications for removal of chains on original tailgates. Available in brightly polished stainless steel or zinc-plated steel for corrosion resistance. These kits require modification to the bed sides and tailgate. Each pair includes links, upper and lower pivot points, hardware, installation template and instructions. Available for, Ford and Dodge Stepside trucks. Stainless links shown. Made by MAR-K in Oklahoma City, USA. Stepside/Fleetside S STEPSIDE STAINLESS... $ pr STEPSIDE STEEL pr S STEPSIDE STAINLESS pr STEPSIDE STEEL pr S STEPSIDE STAINLESS pr STEPSIDE STEEL pr S FLEETSIDE STAINLESS pr FLEETSIDE STEEL pr Flareside (Stepside) S SHORT FLARESIDE STAINLESS... $ pr SHORT FLARESIDE STEEL pr S SHORT/53-87 LONG FLARE STAINLESS pr SHORT/53-87 LONG FLARE STEEL pr DODGE Stepside S HIGHSIDE STEPSIDE STAINLESS... $ pr HIGHSIDE STEPSIDE STEEL pr TAILGATE LATCHES FOR, AND DODGE MAR-K makes tailgate latches with a unique locking system that allows them to stay in the open position. These are spring-loaded and used in custom applications for replacing the old tailgate chains. Zinc plated or stainless steel (for and Dodge). Each pair includes latches, installation hardware and complete instructions. Stainless latches shown. Made by MAR-K in Oklahoma City, USA. Stepside/Fleetside S 34-39/41-87 STEPSIDE STAINLESS... $90.00 pr /41-87 STEPSIDE STEEL pr S FLEETSIDE STAINLESS pr FLEETSIDE STEEL pr Flareside (Stepside) FLARESIDE STEEL... $75.00 pr DODGE Highside Stepside S HIGHSIDE STEPSIDE STAINLESS... $ pr HIGHSIDE STEPSIDE STEEL... $95.00 pr 74 TO ORDER CALL FAX

75 CUSTOM ITEMS BILLET POLISHED LIGHTS WITH LED OR STANDARD LAMPS Made to fit in flat panels. Available for any year, make and model.light fits in 1-1/4 diameter hole. Requires 2-1/2 depth behind light for wiring. Includes retention ring. LEDs - These lights are made of billet aluminum with a polished bezel. The clear lens protects the 12 volt LED light inside. Select White for backup lights or Amber for turn signals. The Red lamp is dual intensity for applications combining the running lamp with turn signal or brake lights. All lighted hole caps come with approximately 10" pigtail wires. Lighted - These lights are made of billet aluminum with a polished bezel. Includes lens and 12 volt light. The bulb is a type 194 miniature single filament bulb commonly used in sidemarker applications. Connect to your existing light or turn signal for extra visibility. MADE BY MAR-K IN OKLAHOMA CITY, USA. For lights to fit in bed side curls, see page 46. LED LAMPS R Red LED Lamps... $ pr R Amber LED Lamps pr R White LED Lamps pr STANDARD LAMPS R Red Standard Lamps... $85.00 pr R Amber Standard Lamps pr Looking for more information about MAR-K parts? Just go to our website: We have pictures, descriptions and prices for each part and a complete technical library available online anytime! Installation instructions are also available online for most MAR-K parts! STAKE POCKET HOLE COVERS Steel pieces cover up your stake pocket holes on Stepside and Fleetside trucks. Just paint and push in! Bases are made of stainless steel to prevent rust and corrosion. Made by MAR-K in Oklahoma, USA. Short bed trucks require 2 pair. Long bed trucks require 3 pair STEPSIDE... $25.00 pr Top dimension is 2-5/16" X 2-3/32" STEPSIDE pr Top dimension is 2-1/4" X 1-9/16" FLEETSIDE pr Top dimension is 2-1/4" X 1-9/16" SPORTSIDE pr Top dimension is 2-1/4" X 1-9/16" INTERIOR STAINLESS TRIM - These trim pieces are located on the interior door panels and rear quarter panels inside the Chevrolet Bel Air, Nomad, 2-10 and Del Ray. Our trim pieces are of excellent quality and made like the original in Oklahoma City, USA with all tabs and bends for installation TAILLIGHT FILLERS Steel filler panels weld in the bed side taillight opening to eliminate the original taillights. Made by MAR-K in Oklahoma, USA. Use with custom or relocated taillights for a SMOOTH new look. Includes detailed instructions FLEETSIDE... $36.00 pr FLEETSIDE pr GET MAR-K QUALITY for your classic Chevy Cars Call today for a complete price list! CHEVROLET PASSENGER CAR STAINLESS TRIM BEL AIR * NOMAD 2-10 * DEL RAY ALSO AVAILABLE: '57 Rocker Mouldings '57 Rocker Moulding Clips Order Online at or call today for a FREE price list. TO ORDER CALL FAX

76 6625 WEST WILSHIRE BLVD. OKLAHOMA CITY, OK Restoration and Custom Pickup Parts (1) 1966 Chevy Long Fleetside - Daryl Starrett, Fort Dodge, IA (2) 1951 Chevy Stakebed - Bruce Owens, Farwell, MI (3) 1938 Ford Short Custom - Earl Johnson, Morrilton, AR (4) 1941 Dodge Short Stepside WC - Mike VonDerahe, Warren, OR (5) 1967 Chevy Long Fleetside - David Gosnell, Tomball, TX (6) 1963 C Short Stepside - Jesse Gonzales, San Antonio, TX (7) 1941 Ford Short Flareside - Brad Breach, Reno, NV (8) 1955 Chevy Cameo - Lisa Knight, White House, TN (9) 1948 Dodge B1B - JW Ramsey, Benton, AR We want to thank all of our customers who have sent us pictures of their trucks for our catalog!