HIGH PRESSURE - pumps

Transcription

1 Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group 3) Rear cover Aluminium (groups 1 and 2), cast iron (group 3) Sealing NBR Operation conditions Medium Hydraulic oil of -HM46 type or substitute Fluid viscosity From 10 cst up to 600 cst (recommended 30 45) Working temperature From -20 C up to +90 C (medium), from -20 C up to +60 C (ambient) Symbols Displacement Maximum working pressure (continuous operation) Maximum peak pressure (intermittent operation) Maximum rotary speed Group 1 - conical 1:8, European cover (Ø 25.4 mm), threaded connection T-BTD111D01 T-BTD111I /8 3/ T-BTD116D01 T-BTD116I /8 3/ T-BTD118D01 T-BTD118I /8 3/ T-BTD127D01 T-BTD127I /8 3/ T-BTD132D01 T-BTD132I /8 3/ T-BTD137D01 T-BTD137I /8 3/ T-BTD148D01 T-BTD148I /8 3/ T-BTD158D01 T-BTD158I /2" 3/ T-BTD163D01 T-BTD163I /2" 3/ T-BTD180D01 T-BTD180I /2" 3/

2 Gear pumps TRAE Group 1 - conical 1:8, European cover (Ø 25.4 mm), flanged connection T-BTD107D03 T-BTD107I T-BTD111D03 T-BTD111I T-BTD116D03 T-BTD116I T-BTD118D03 T-BTD118I T-BTD127D03 T-BTD127I T-BTD132D03 T-BTD132I T-BTD137D03 T-BTD137I T-BTD148D03 T-BTD148I T-BTD158D03 T-BTD158I T-BTD163D03 T-BTD163I T-BTD180D03 T-BTD180I Group 2 - conical 1:8, European cover (Ø 36.5 mm), threaded connections T-BTD240D01 T-BTD240I01 4 1/2 1/ T-BTD260D01 T-BTD260I01 6 1/2 1/ T-BTD280D01 T-BTD280I01 8 1/2 1/ T-BTD2120D01 T-BTD2120I /2 1/ T-BTD2140D01 T-BTD2140I /2 1/ T-BTD2160D01 T-BTD2160I /4 1/ T-BTD2200D01 T-BTD2200I /4 1/ T-BTD2230D01 T-BTD2230I /4 1/ T-BTD2250D01 T-BTD2250I /4 1/ T-BTD2280D01 T-BTD2280I /4 1/ T-BTD2300D01 T-BTD2300I /4 1/

3 Gear pumps TRAE Group 2 - conical 1:8, European cover (Ø 36.5 mm), flanged connections T-BTD240D02 T-BTD240I T-BTD260D02 T-BTD260I T-BTD280D02 T-BTD280I T-BTD2120D02 T-BTD2120I T-BTD2140D02 T-BTD2140I T-BTD2160D02 T-BTD2160I T-BTD2200D02 T-BTD2200I T-BTD2230D02 T-BTD2230I T-BTD2250D02 T-BTD2250I T-BTD2280D02 T-BTD2280I T-BTD2300D02 T-BTD2300I Group 2 - conical 1:5, German cover (Ø 80 mm), flanged connections T-BTD260D04 T-BTD260I T-BTD280D04 T-BTD280I T-BTD2120D04 T-BTD2120I T-BTD2140D04 T-BTD2140I T-BTD2160D04 T-BTD2160I T-BTD2200D04 T-BTD2200I T-BTD2230D04 T-BTD2230I T-BTD2250D04 T-BTD2250I

4 Gear pumps TRAE Group 3 - conical 1:8, European cover (Ø 50.8 mm), threaded connections T-BTD3220D01 T-BTD3220I /4 3/ T-BTD3260D01 T-BTD3260I / T-BTD3280D01 T-BTD3280I / T-BTD3320D01 T-BTD3320I / T-BTD3360D01 T-BTD3360I / T-BTD3420D01 T-BTD3420I / T-BTD3460D01 T-BTD3460I / T-BTD3500D01 T-BTD3500I / T-BTD3550D01 T-BTD3550I / Group 3 - conical 1:8, European cover (Ø 50.8 mm), flanged connections T-BTD3220D02 T-BTD3220I T-BTD3260D02 T-BTD3260I T-BTD3280D02 T-BTD3280I T-BTD3340D02 T-BTD3340I T-BTD3390D02 T-BTD3390I T-BTD3430D02 T-BTD3430I T-BTD3460D02 T-BTD3460I T-BTD3510D02 T-BTD3510I T-BTD3550D02 T-BTD3550I

5 Gear pumps SAAMI Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. The mounting plates, shafts and connections are compliant with European and German standards. The pumps are available as single or multiple versions. The displacement ranges from 1.4 to 98 cm 3 /r.p.m. at the maximum working pressure 280 bar, however depends on the pump type. Some types are available as hydraulic motors. pump type displacement [cm 3 /r.p.m.] construction 1.5PE* Cast iron mounting plate and rear cover, housing made of aluminium 2PE* Cast iron mounting plate and rear cover, housing made of aluminium 2.5PB* Cast iron mounting plate and rear cover, housing made of aluminium 3PE* Cast iron mounting plate and rear cover, housing made of aluminium 3.5PC* Cast iron mounting plate and rear cover, housing made of aluminium PG Mounting plate, housing and rear cover made of spheroidal cast iron * - available as hydraulic motors as well 2PE type 2.5PB type 3PE type 3.5PC type PG331 type 1065