Engine-Powered Forklift Trucks ton (Counter-Balanced Type)

Transcription

1 Engine-Powered Forklift Trucks ton (Counter-Balanced Type)

2 ENHANCED OPERATOR COMFORT

3 SUPERIOR MANEUVERABILITY AND ASSURED SAFETY Excellent operator visibility Wider forward visibility Clearer visibility of the fork tip-50% improvement over other current models. This achievement was mad possible by lowering the dashboard by 70mm and the tie bar by 190mm. a remarkable improvement of the forward view along with quicker recognition of the fork position. An operator-friendly design Amazing backward visibility Reshaped counter weight for better rearview sight. The round shape of the rear top end of the counter weight substantially improves visibility for increased safety during backward movement Reduced fatigue due to a semi-circular steering wheel A smaller diameter (300mm outer diameter) steering wheel gives improved vehicle maneuverability. In addition, this compact steering wheel makes it much easier to get on and off the truck. Neutral safety mechanism This feature enhances safety of operation. The engine cannot be started unless the change lever is in the neutral position. Adjustable Seat The Operator's seat is with self-contained restraint system for safety, and you can recline forward and backward. Anti-slip mat on the hood A rubber strip is attached to the hood to prevent slippage while stepping on and off. Reduced fatigue due to a semi-circular steering wheel A smaller diameter (300mm outer diameter) steering wheel gives improved vehicle maneuverability. In addition, this compact steering wheel makes it much easier to get on and off the truck. High-mounted rear combination lights The brake lights are easily visible at the top of the overhead guard. Recessed for procetion, they are vibratin resistandt Meter panel optimally located to the right of the driver s seat The meter panel is located on the top right side of the dashboard for easier readability by the operator. Meter panel with LED indicators The LED has a longer life and is easy to read even during daylight shift operation. Solid& single-piece headguard The front and rear pillars as well as roof are all welded together in a single-piece construction to give additional strength to the entire structure.

4 RUGGEDNESS AND INCREASED DURABILITY Durable transmissions New designed and developed durable transmissions are for quiet operation and maximum durability, and are built to insure the highest quality. Durable steering axles Also a durable design, the steer axle has been strengthened and improved for durability in demanding applications. Sturdier mast Minimized distortion of the mast by redesigned positioning the mast supports and tilt cylinders. The traditional robust mast was further upgraded by adopting sturdier tie bars, while maintaining a wide range of viewing angles. Cooler running through improved Optimal positioning of the fan, radiator and muffler has reduced the operation coolant temperature. (gasoline models) the operating temperature of the hydraulic oil has been reduced.

5 EASY MAINTENANCE AND ENVIRONMENT FRIENDLINESS Detachable side covers for convenient inspection and simple maintenance. Inspection and maintenance can more easily be performed due to one-touch detachable side covers and a wide-opening hood. Integral layout of electrical parts and other system devices Maintenance inspections can be performed more easily, as electrical parts such as the fuse box, relay, and battery are neatly integrated into a conveniently compact area. New emissions control and engine management systems deliver excellent power, economy and reliability while meeting current Euro emission standards: Approved Stage IIIA (Diesel powered engine). Cup holder Convenient for keeping cups, pens and other small items. Portable glove box Detachable and portable

6 OPTIONAL LED Front lights Rotating warning light LED Rear Combination Light Overhead exhaust system Sideshifter Three-stage mast LPG exclusive/dual fuel(lpg/gasoline)

7 1 Manufacturer SAMUK 31 Number Front / Rear 2/2 2/2 2/2 2/2 2/2 Characteristics 2 Model FD15 F F F F 3 Load Capacity kg Load Center mm Power Type Diesel Diesel Diesel Diesel Diesel 32 Tires Size Front 33 Rear -10PR PR X X Wheelbase(J) mm Wheels (x = driven) Front / Rear 2x/2 2x/2 2x/2 2x/2 2x/2 7 Maximum Fork Height(A) mm Free Lift mm Fork Size(K, M, L) LxWxT mm 920x100x x122x0 1070x122x0 1070x122x5 1070x122x50 10 Fork Spread (P) Max. / Min. mm 860 / / / / / Tilt Angle Fwd. / Bwd. deg. 6/12 6/12 6/12 6/12 6/12 12 Length to Fork Face(D) mm Chassis & Wheels Front mm Tread Rear mm Backrest Height mm Overhead Guard Clearance mm Counterweight Height mm Drawbar Pin Center Height mm Step Height / Floor Height mm 20 / / / /680 60/680 Dimensions 13 Overall Width(E) mm Mast Height Fork Lowered(F) mm Mast Height Fork Raised(H) mm Overhead Guard Height(G) mm Operator's Seat Height mm Turning Radius (C) mm uced vibration by adopting dual- 20 Load Distance sfer of vibration to (Centerline the operator, of front axle with to front face of forks) shion absorbers between the seat and smission. Moreover, use of the same mm Rear Overhang mm on adopted in the 22 hood, Basic realizing Right Angle a Stacking dual Aisle Width (Add load length and clearance) ehicle vibrations. Performance 23 Travel, Max. 2 Speeds Lifting 25 Lowering 26 Max. Drawbar Pull 27 Max. Gradeability* mm Forward km/h Reverse km/h Full Load mm/sec No Load mm/sec Full Load mm/sec No Load mm/sec foot maneuvering An amazing 5% increase in floor space by placing tilt cylinders under the floor. This gives a smooth footwell in addition to easy entry and exit. Full Load kn No Load kn Full Load % No Load % Total Weight kg Engine & Transmission 1 Min. with Load mm Underclearance 2 Center of Wheelbase mm Brake Service (Foot) Parking 5 Battery Voltage / Capacity (5HR) V/AH 12/28 12/6 12/6 12/6 12/6 6 Make / Model ISUZU C20 ISUZU C20 ISUZU C20 ISUZU C20 ISUZU JG2 7 Rated Horsepower / r.p.m. kw 3.7/ / / / / Internal Rated Torque / r.p.m. N-m 138.5/ / / / / Combustion Engine Number of Cylinder 50 Alternator output kw/ Amp 0.5/5 0.5/5 0.5/5 0.5/5 0.5/5 51 Fuel Tank Capacity Type liter Transmission 53 Operating Pressure Note:* Computed values. Type Power-shift Power-shift Power-shift Power-shift Power-shift Stage Fwd. -Rvs For Attachments MPa Weight 29 Weight Distribution Full Load 30 No Load Front kg Rear kg Front kg Rear kg More convenient parking lever The lever is positioned to the right of the steering wheel for easier entry and exit. A double-action brake release on the lever further improves safety. Easier entry and exit from an extra-wide step- 55%wider The secure step with enlarged foot space enables greater comfort and less fatigue while entering and exiting the vehicle.

8 1 Manufacturer SAMUK 28 Total Weight kg Characteristics 2 Model FG15 FG20 FG25 FG30 FG35 3 Load Capacity kg Load Center mm Power Type Gasoline/LPG 6 Wheels (x = driven) Front / Rear 2x/2 2x/2 2x/2 2x/2 2x/2 7 Maximum Fork Height(A) mm Free Lift mm Weight 29 Full Load Weight Distribution 30 No Load Front kg Rear kg Front kg Rear kg Tires Number Front / Rear 2/2 2/2 2/2 2/2 2/2 32 Front Size 33 Rear -10PR PR X X Fork Size(K, M, L) LxWxT mm 920x100x x122x0 1070x122x0 1070x122x5 1070x122x50 3 Wheelbase(J) mm Dimensions 10 Fork Spread (P) Max. / Min. mm 860 / / / / / Tilt Angle Fwd. / Bwd. deg. 6/12 6/12 6/12 6/12 6/12 12 Length to Fork Face(D) mm Overall Width(E) mm Mast Height Fork Lowered(F) mm Mast Height Fork Raised(H) mm Overhead Guard Height(G) mm Operator's Seat Height mm Chassis & Wheels 35 Tread Front mm Rear mm Backrest Height mm Overhead Guard Clearance mm Counterweight Height mm Drawbar Pin Center Height mm Step Height / Floor Height mm 20 / / / /680 60/680 1 Underclearance Min. with Load mm Center of Wheelbase mm Turning Radius (C) mm Brake Service (Foot) 20 Load Distance (Centerline of front axle to front face of forks) mm Rear Overhang mm Parking 5 Battery Voltage / Capacity (5HR) V/AH 12/28 12/6 12/6 12/6 12/6 Performance Basic Right Angle Stacking Aisle Width (Add load length and clearance) Travel, Max. 2 Speeds Lifting 25 Lowering 26 Max. Drawbar Pull 27 Max. Gradeability* mm Forward km/h Reverse km/h Full Load mm/sec No Load mm/sec Full Load mm/sec No Load mm/sec Full Load kn No Load kn Full Load % No Load % Engine & Transmission 6 7 Make / Model Rated Horsepower / r.p.m. NISSAN / K21 NISSAN / K21 NISSAN / K21 NISSAN / K25 NISSAN / K25 kw 31.2/ / / / / Internal Combustion Engine Rated Torque / r.p.m. Number of Cylinder N-m 13.7/ / / / /1600 Piston Displacement cc Alternator output kw/amp 0.60 / / / / / Transmission 53 Operating Pressure Fuel Tank Capacity Type liter Type Power-shift Power-shift Power-shift Power-shift Power-shift Stage Fwd. -Rvs For Attachments MPa Note:* Computed values.

9 Wide view mast VM Mast model D15 Load center 500mm Max. lift height kg kg kg kg kg mm D15 fork lowered(mm) Mast height fork lift with backrest(mm) VM VM VM VM VM VM VM50 VM500 D15 Tilt range fwd / bwd deg * *100 * * * * *1350 * * * * VM550 *1100 *1500 *1700 * *3-6 VM600 *800 *1300 *100 * *3-6 2 stage free lift mast VFM Mast model Load center 500mm D15 Max. lift height kg kg kg kg kg mm D15 fork lowered(mm) Mast height fork lift with backrest(mm) D15 free lift with backrest(mm) D15 VFM VFM VFM VFM VFM Tilt range fwd / bwd deg 3 stage free lift mast VN Mast model D15 Load center 500mm Max. lift height kg kg kg kg kg mm D15 fork lowered(mm) Mast height fork lift with backrest(mm) D15 free lift with backrest(mm) D15 VN VN VN * * * * VN * * * * VN * * * *2900 VN * * * *2750 VN * * * * *3200 VN * * * * *200 Tilt range fwd / bwd deg * *3-6