I.C. ENGINE POWERED FORKLIFT TRUCK

Transcription

1 I.C. ENGINE POWERED FORKLIFT TRUCK Counter-Balance Type 1,5-3,5 ton Havelange lifts, driven by service FG15C13 / FG15T13 / FHG15C3 / FHG15T3 FD15C13 / FD15T13 / FHD15C3 / FHD15T3 / FHD15C3Z / FHD15T3Z FG18C13 / FG18T13 / FHG18C3 / FHG18T3 FD18C13 / FD18T13 / FHD18C3 / FHD18T3 / FHD18C3Z / FHD18T3Z FG20C3 / FG20T3 / FHG20C3 / FHG20T3 FD20C3 / FD20T3 / FD20C3Z / FD20T3Z / FHD20C3 / FHD20T3 FG25C3 / FG25T3 / FHG25C3 / FHG25T3 FD25C3 / FD25T3 / FD25C3Z / FD25T3Z / FHD25C3 / FHD25T3 FG30C3 / FG30T3 / FHG30C3 / FHG30T3 FD30C3 / FD30T3 / FD30C3Z / FD30T3Z / FHD30C3 / FHD30T3 FD35T3S

2 GENERAL ENHANCED OPERATOR COMFORT SUBSTANTIALLY REDUCED VIBRATION BY ADOPTING DUAL-FLOATING SYSTEMS FOR BOTH THE ENGINE AND HOOD Minimizes the transfer of vibration to the operator, with fourpoint rubber cushion absorbers between the seat and engine and its transmission. Moreover, use of the same four-point suspension adopted in the hood, realizing a dual effect in reducing vehicle vibrations. EXPANSIVE FLOOR SPACE FOR EASIER FOOT MANEUVERING An amazing 45% increase in floor space by placing tilt cylinders under the floor. This gives a smooth footwell in addition to easy entry and exit. MORE CONVENIENT PARKING LEVER The lever is positioned to the right of the steering wheel for easier entry and exit. A double-action brake release on the lever further improves safety. EXTRA ENTRY AND EXIT FROM AN EXTRA-WIDE STEP -- 55% WIDER The secure step with enlarged foot space enables greater comfort and less fatigue while entering and exiting the vehicle. MULTIFUNCTIONAL SUSPENSION SEAT (available for 1.5/1.8 ton high power & 2/3.5 ton models) Features include reinforced driver support, reduced vibration, operator weight balance adjusting, forward and backward reclining, a rear utility pocket and seat belt. RESIN SCREEN The resin screen on the overhead guard enables comfortable outdoor operation in wet weather.

3 SUPERIOR MANEUVERABILITY AND ASSURED SAFETY INNOVATIVE FORK-LANDING MECHANISM (available for wide view two-stage mast) The fork-lowering speed decelerates at a height of approximately 150 mm above the ground enabling accurate placement of the forks into the load fork pockets or pallet. REDUCED FATIGUE DUE TO A SEMI-CIRCULAR STEERING WHEEL A smaller diameter (300 mm outer diameter) steering wheel gives improved vehicle maneuverability. In addition, this compact steering wheel makes it much easier to get on and off the truck. METER PANEL OPTIMALLY LOCATED TO THE RIGHT OF THE DRIVER S SEAT The meter panel is located on the top right side of the dashboard for easier readability by the operator. MULTI-CONE SYNCHRONIZER SHIFT LEVERS The newly adopted levers enable smooth shifting from both forward and reverse (available for manual transmission models). ANTI-ROLL MECHANISM FOR ASSURED SAFETY DURING TURNING (available for ton models) Warning: This system does not guarantee accident avoidance or prevention of vehicle overturning. NEUTRAL SAFETY MECHANISM This feature enhances safety of operation. The engine cannot be started unless the change lever is in the neutral position. ANTI-SLIP MAT ON THE HOOD A rubber strip is attached to the hood to prevent slippage while stepping on and off. METER PANEL WITH LCD INDICATORS The LCD has a longer life and is easy to read even during daylight shift operation. HIGH-MOUNT REAR COMBINATION LIGHTS The rear combination lights are installed on the top left and right sides of the overhead guard for easier recognition by on-site workers. EXCELLENT OPERATOR VISIBILITY Wider forward visibility Clearer visibility of the fork tips -- 50% improvement over other current models. This achievement was made possible by lowering the dashboard by 70mm and the tie bar by 190mm. A remarkable improvement of the forward view along with quicker recognition of the fork position. An operatorfriendly design with assured safety, high efficiency and relaxing feel. Amazing backward visibility Reshaped counter weight for better rearview sight. The round shape of the rear top end of the counterweight substantially improves visibility for increased safety during backward movement.

4 RUGGEDNESS AND INCREASED DURABILITY SINGLE-PIECE HEADGUARD The front and rear pillars as well as roof are all welded together in a single-piece construction to give additional strenght to the entire structure. TCM TRANSMISSIONS TCM designed and developped these transmissions for quiet operation and maximum durability, and TCM builds them to insure the highest quality. TCM STEERING AXLES Also a new TCM design, the steer axle has been strengthened and improved for durability in demanding applications. STURDIER MAST Minimized distortion of the mast by redesigned positioning the mast supports and tilt cylinders. TCM s traditional robust mast was further upgraded by adopting sturdier tie bars, while maintaining a wide range of viewing angles. IMPROVED DURABILITY WITH LUBRICANT FILLED LIFT CYLINDER Oil filled lift cylinders give improved durability. (available for ton models) COOLER RUNNING THROUGH IMPROVED AIRFLOW Optimal positioning of the fan, radiator and muffler has reduced the operating coolant temperature (gasoline models). The operating temperature of the hydraulic oil has been reduced, also by 10 C by upgrading the mechanical components and circuitry. 5% IMPROVED FRONT AND REAR STABILITY RATIO (available for ton models) Stable and more consistent cargo handling as well as travel due to an improved stability ratio.

5 EASY MAINTENANCE AND ENVIRONMENT FRIENDLINESS DETACHABLE SIDE COVERS FOR CONVENIENT INSPECTION AND SIMPLE MAINTENANCE Inspection and maintenance can more easily be performed due to one-touch detachable side covers and a wide-opening hood. INTEGRAL LAYOUT OF ELECTRICAL PARTS AND OTHER SYSTEM DEVICES Maintenance inspections can be performed more easily, as electrical parts such as the fuse box, relay and battery are neatly integrated into a conveniently compact area. NEW ENGINES, COMPLIANT WITH WORLDWIDE 2 nd STAGE EMISSION REGULATIONS Powerful, yet appropriate, diesel engines, compliant with stringent global emissions regulations. ONE-PIECE FLOORBOARD Gives more convenient inspection and easier maintenance, as the one-piece floorboard unit is easily detachable without using any tools. NEW OPTIONAL EQUIPMENT Three-stage mast with fourcylinder mechanism (available for 2-3 ton models) The cylinders are symmetrically located to the left and right for improved forward visibility. PORTABLE GLOVE BOX Detachable and portable. Integral Side Shifter A major improvement in the integral side shifter ensures less load loss and improved forward visibility. Low-noise mast (available for 2-3 ton models) Reduced noise from the fork and carriage significantly reduces chain shudder. CUP HOLDER Convenient for keeping cups, pens and other small items. Lift Lock With the engine is off, the forks cannot be lowered, even when the operator is in the seat. Interlock System This safety device allows traveling and loading/unloading only when the operator is in the seat.

6 OTHER OPTIONAL EQUIPMENT Rotating warning light Rear working light Overhead exhaust system Windshield wiper Cabin-panel type (available for ton models) Heater LPG exclusive/dual fuel (LPG/gasoline) package Pre-cleaner engine air intake Steel cabin-enclosed type with air-cooler (available for ton models) * As far as the detailed optional information is concerned, please refer to the specification sheets. For various types of attachments, please also refer to the attachment catalogue which is separately prepared from this sales catalogue. Head light guard Air Boss tire

7 TCM has been engaged in manufacturing various forklift truck models that take into account the needs and requirements of our valued cutomers. Now, TCM proudly presents the inoma series with such benefits as enhanced operator comfort, superior safety assurance, ruggedness and increased durability as well as easy maintenance and envirnment friendliness. These notable benefits are backed by TCM s many years of experience and superb technological innovations, and TCM is confident in placing the full inoma series product line on variaus job sites in markets around the world. 1,5 ton FG15C13 FD15C13 FHD15C3 FG15T13 FD15T13 FHD15T3 FHG15C3 FHD15C3Z FHG15T3 FHD15T3Z 1,8 ton FG18C13 FD18C13 FHD18C3 FG18T13 FD18T13 FHD18T3 FHG18C3 FHD18C3Z FHG18T3 FHD18T3Z 2,0 ton FG20C3 FD20C3 FHD20C3 FG20T3 FD20T3 FHD20T3 FHG20C3 FD20C3Z FHG20T3 FD20T3Z 2,5 ton FG25C3 FD25C3 FHD25C3 FG25T3 FD25T3 FHD25T3 FHG25C3 FD25C3Z FHG25T3 FD25T3Z 3,0 ton FG30C3 FD30C3 FHD30C3 FG30T3 FD30T3 FHD30T3 FHG30C3 FD30C3Z FHG30T3 FD30T3Z 3,5 ton FD35T3S

8 SPECIFICATIONS -- 1,5-1,8 ton Wide view VM FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 Overall Lowered Raised with F / B FG15T3 FG15C3 Service Weight (kg) FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM / VM / VM / VM / VM / VM VM VM VM VM475 VM * * * * * * * * VM550 *1100 *1100 *1300 * *3 / VM600 *800 *800 * * *3 / Weight for diesel model: +30kg FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z Overall Lowered Raised with F / B FHG15T3 FHG15C3 Service Weight (kg) FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM / VM / VM / VM / VM / VM VM VM VM VM475 VM * * * * * * * * VM550 *1100 *1100 *1300 * *3 / VM600 *800 *800 * * *3 / Weight for diesel model: +110kg (TD 27)

9 Wide view Full Free 2-stage VFM FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 Overall Lowered (2) Raised with F / B FG15T3 FG15C3 (3) Service Weight (kg) FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFM / VFM / VFM / VFM / VFM / VFM VFM VFM VFM VFM475 VFM * * * * * * * * VFM550 *1100 *1100 *1300 * *3 / VFM600 *800 *800 * * *3 / For height without backrest: -470mm. (2) For free lift without backrest: +470mm. Weight for without backrest: -20kg. (3) Weight for diesel model: +30kg FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z Overall Lowered (2) Raised with F / B FHG15T3 FHG15C3 (3) Service Weight (kg) FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFM / VFM / VFM / VFM / VFM / VFM VFM VFM VFM VFM475 VFM * * * * * * * * VFM550 *1100 *1100 *1300 * *3 / VFM600 *800 *800 * * *3 / For height without backrest: -470mm. (2) For free lift without backrest: +470mm. Weight for without backrest: -20kg. (3) Weight for diesel model: +110kg (TD27)

10 Wide view Full Free 3-stage VFHM FG / D15T13 FG / D15C13 FG / D18T13 FG / D18C13 Overall Lowered (2) Raised with F / B FG15T3 FG15C3 (3) Service Weight (kg) FG18T3 FG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFHM VFHM VFHM435 VFHM480 VFHM500 VFHM540 VFHM * * * * * * * * * * * * * * * * * * * 3 / 6 *3 / 6 3 / 6 *3 / VFHM650 *950 *950 *1100 * *3 / VFHM700 *750 *750 *750 * *3 / For height without backrest: -505mm. (2) For free lift without backrest: +500mm. Weight without backrest: -20kg. (3) Weight for diesel model: +30kg FHG15T13 / FHD15T3Z FHG15C13 / FHD15C3Z FHG18T13 / FHD18T3Z FHG18C13 / FHD18C3Z Overall Lowered (2) Raised with F / B FHG15T3 FHG15C3 (3) Service Weight (kg) FHG18T3 FHG18C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VFHM VFHM VFHM435 VFHM480 VFHM500 VFHM540 VFHM * * * * * * * * * * * * * * * * * * * 3 / 6 *3 / 6 3 / 6 *3 / VFHM650 *950 *950 *1100 * *3 / VFHM700 *750 *750 *750 * *3 / For height without backrest: -505mm. (2) For free lift without backrest: +500mm. Weight without backrest: -20kg. (3) Weight for diesel model: +110kg (TD27) Rated Capacity with (*): Shows capacity with front dual tires. Service Weight of VM/VFM and of VFHM represents the weight of vehicles equipped with special dual tires. Lifting Speed with VFM/VFHM : For FG/FD15T13 - FG/FD15C13 - FG/FD18T3 - FG/FD18C3 - FG15T3/C3 - FG18T3/C with VFM FG 470mm/s with load. 550mm/s without load. FD 420mm/s with load. 490mm/s without load. with VFHM FG 530mm/s with load. 610mm/s without load. FD 480mm/s with load. 540mm/s without load. For FHG15T3/C - FHD15T3Z/C3Z - FHG18T3/C3 - FHD18T3Z/C3Z - FHG15T3/C3 - FHG18T3/C with VFM FG 480mm/s with load. 560mm/s without load. FD 420mm/s with load. 540mm/s without load. with VFHM FG 540mm/s with load. 620mm/s without load. FD 560mm/s with load. 600mm/s without load. Lowering speed with VFM/VFHM mast: 420mm/s with load. 370mm/s without load. Overall Vehicle lenght with VFM mast: +10mm longer than of STD model with VM mast with VFHM mast: +25mm longer than of STD model with VM mast

11 SPECIFICATIONS ,5-3 ton Wide view VM Overall FG / FD 20 FG / FD 25 Lowered Raised with F / B (3) Service Weight (kg) FG / FD 20 FG / FD 25 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD VM / VM / VM / VM / VM / VM VM VM425 VM450 VM475 VM * * * * * * * * * * * * * * * * * * VM550 *1700 * *3 / VM600 *1300 *1300 *1400 * *3 / (3) Weight for diesel model: +130kg (TD27) +110kg (C240) Wide view Full Free 2-stage VFM FG / D20 FG / D25 For height without backrest: -385mm. (2) For free lift without backrest: +385mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Overall Lowered Raised with (2) Free Lift with (3) Service Weight (kg) FG20 FG25 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFM VFM VFM VFM VFM VFM *6-12 VFM *6-12 VFM *2000 *2000 *2500 *2500 *6-12 VFM *1950 *1950 *2450 *2450 *6-12 VFM *1850 *1850 *2350 *2350 *6-6 VFM *1700 *2250 *2250 *6-6 VFM550 *1700 * * VFM600 *1300 *1300 *1400 * *

12 Wide view Full Free 3-stage VFHM FG / D20 FG / D25 Overall Lowered Raised with (2) Free Lift with F/B FG20 (3) Service Weight (kg) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFHM *6-10 VFHM *6-10 VFHM *2000 *2000 *2400 *2400 *6-10 VFHM *1900 *1900 *2300 *2300 *6-10 VFHM *1800 *1800 *2250 *2250 *6-10 VFHM *1750 *1750 *2150 *2150 *3-6 VFHM *1650 *1650 *1800 *1800 *3-6 VFHM650 *1550 * * VFHM700 *1250 *1250 *1250 * * FG25 For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Rated Capacity with (*): Shows capacity with DD: front dual tires. Serves Weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD: special dual tires. Loading Speed with VFM/VFHM : with VFM FG 480mm/s with load. 520mm/s without load. FD 540mm/s with load. 590mm/s without load. with VFHM FG 500mm/s with load. 540mm/s without load. FD 560mm/s with load. 610mm/s without load. Lowering speed with VFM/VFHM mast: 400mm/s with load. 350mm/s without load. Overall Vehicle lenght with VFHM mast: +15mm longer than that of STD model with VM/FM mast

13 Wide view Full Free 2-stage VFW (4 CYLINDER) FG / D20 FG / D25 For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Overall Lowered Raised with (2) Free Lift with F/B FG20 (3) Service Weight (kg) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VFW VFW VFW VFW * *1900 * VFW * *1900 *1900 *2350 * FG25 Wide view Full Free 3-stage VFHW (4 CYLINDER) FG / D20 FG / D25 Overall Lowered Raised with (2) Free Lift with F/B FG20 (3) Service Weight (kg) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD VHW * *1900 *1900 *2400 * VHW * *1900 *1900 *2300 * VHW * *1800 *1800 *2250 * VHW *1750 *1750 *2150 *2150 VHW *1750 *1750 *2100 *2100 FG25 For height without backrest: -455mm. (2) For free lift without backrest: +455mm. Weight without backrest: -20kg. (3) Weight for diesel model: +130kg (TD27) +110kg(C240) Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed with VFM/VFHM : with VFM FG 450mm/s with load. 490mm/s without load. FD 520mm/s with load. 570mm/s without load. with VFHM FG 460mm/s with load. 510mm/s without load. FD 540mm/s with load. 590mm/s without load. Lowering speed with VFM/VFHM mast: 420mm/s with load. 380mm/s without load. Overall Vehicle lenght with VFW/VFHW (4CYLINDER) mast: +35mm longer than that of STD model with VM mast

14 Wide view VM FG / D30 Overall Lowered Raised with F/B (3) Service Weight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD VM VM VM VM VM VM *6-12 VM *6-12 VM *3000 *6-12 VM *3000 *6-12 VM *2900 *2900 *6-6 VM * *2850 * VM550 *2400 * * VM600 *2000 * * (3) Weight for diesel model: +140kg (TD27) +120kg (C240) Wide view Full Free 2-stage VFM FG / D30 Overall Lowered Raised with (2) Free lift with F/B (3) Service Weight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VM VM VM VM VM VM *6-12 VM *6-12 VM *3000 *6-12 VM *3000 *6-12 VM *2900 * VM * *2850 * VM550 *2400 * * VM600 *2000 * * For height without backrest: -540mm. (2) For free lift without backrest: +540mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240)

15 Wide view Full Free 3-stage VFHM FG / D30 Overall Lowered Raised with (2) Free lift with F/B (3) Service Weight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VFHM *6-10 VFHM *6-10 VFHM *3000 *3000 *6-10 VFHM *2900 *2900 *6-10 VFHM *2750 *2750 *6-10 VFHM *2650 *2650 *3-6 VFHM *2100 *2100 *3-6 VFHM650 *1700 * * VFHM * For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) Rated Capacity with (*): Shows capacity with DD: front dual tires. Serves Weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD: special dual tires. Lifting Speed with VFM/VFHM : with VFM FG 420mm/s with load. 440mm/s without load. FD 460mm/s with load. 530mm/s without load. with VFHM FG 430mm/s with load. 450mm/s without load. FD 480mm/s with load. 550mm/s without load. Lowering speed with VFM/VFHM mast: 400mm/s with load. 350mm/s without load. Overall Vehicle lenght with VFHM mast: +15mm longer than that of STD model with VM/FM mast

16 Wide view Full Free 2-Stage VFW (4CYLINDER) FG / D30 Overall Lowered Raised with (2) Free lift with F/B (3) Service Weight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VFW VFW VFW VFW *6-12 VFW *6-12 For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) Wide view Full Free 3-Stage VFHW (4CYLINDER) FG / D30 Overall Lowered Raised with (2) Free lift with F/B (3) Service Weight (kg) FG30 PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD VHW *2900 *6-10 VHW *2800 *6-10 VHW *2750 *6-10 VHW *2650 *2650 VHW *2600 *2600 For height without backrest: -580mm. (2) For free lift without backrest: +580mm. Weight without backrest: -30kg. (3) Weight for diesel model: +140kg (TD27) +120kg(C240) Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed with VFM/VFHM : with VFM FG 360mm/s with load. 420mm/s without load. FD 430mm/s with load. 500mm/s without load. with VFHM FG 380mm/s with load. 430mm/s without load. FD 450mm/s with load. 520mm/s without load. Lowering speed with VFM/VFHM mast: 400mm/s with load. 350mm/s without load. Overall Vehicle lenght with VFHM mast: +35mm/+45mm longer than that of STD model with VM mast

17 Wide view VM FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 Overall Lowered Raised with F/B FHG 20T3 FHG 20C3 (2) Service Weight (kg) FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm deg S DD SDD S DD SDD S DD SDD VM VM VM VM VM VM *6-12 VM *6-12 VM *2000 *2000 *2500 *2500 *3000 *6-12 VM *1950 *1950 *2450 *2450 *3000 *6-12 VM *1850 *1850 *2350 *2350 *2900 *2900 *6-6 VM *1700 *2250 *2250 *2850 *6-6 VM550 *1700 *1700 *2400 * * VM600 *1300 *1300 *1400 *1400 *2000 * * Figures for (2t; 2,5t model). For (3t model) +45mm (2) Weight for diesel model: (2t model) +120kg, (2,5t model) +120kg, (3t model) +130 kg. Wide view Full Free 2-stage VFM FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 Overall (2) Raised with Lowered (3) Free lift with F/B FHG 20T3 FHG 20C3 (4) Service Weight (kg) FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VM VM VM VM VM VM *6-12 VM *6-12 VM *2000 *2000 *2500 *2500 *3000 *6-12 VM *1950 *1950 *2450 *2450 *3000 *6-12 VM *1850 *1850 *2350 *2350 *2900 *2900 *6-6 VM *1700 *2250 *2250 *2850 *6-6 VM550 *1700 *1700 *2400 * * VM600 *1300 *1300 *1400 *1400 *2000 * * Figures for (2t, 2.5t model); For (3t model) +45mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. / For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -180mm. / For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. / Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130kg.

18 Wide view Full Free 3-stage VFHM FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 Overall (2) Raised with Lowered (3) Free lift with F/B FHG 20T3 FHG 20C3 (4) Service Weight (kg) FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VFHM *6-10 VFHM *6-10 VFHM *2000 *2000 *2400 *2400 *3000 *3000 *6-10 VFHM *1900 *1900 *2300 *2300 *2900 *2900 *6-10 VFHM *1800 *1800 *2550 *2250 *2750 *2750 *6-10 VFHM *1750 *1750 *2150 *2150 *2650 *2650 *3-6 VFHM *1650 *1650 *1800 *1800 *2100 *2100 *3-6 VFHM650 *1550 *1550 *1700 * * VFHM700 *1250 *1250 *1250 * * Figures for (2t, 2.5t model); For (3t model) +45mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -180mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Rated Capacity with (*): Shows capacity with DD: front dual tires. Service weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD: special dual tires. Lifting Speed with VFM/VFHM : with VFM FG (2t, 2.5t model) 530mm/s with load. 560mm/s without load. FD (2t, 2.5t model) 550mm/s with load. 580mm/s without load. FG (3t model) 450mm/s with load. 470mm/s without load. FD (3t model) 470mm/s with load. 490mm/s without load. with VFHM FG (2t, 2.5t model) 560mm/s with load. 580mm/s without load. FD (2t, 2.5t model) 570mm/s with load. 600mm/s without load. FG (3t model) 460mm/s with load. 480mm/s without load. FD (3t model) 480mm/s with load. 500mm/s without load. Lowering speed with VFM/VFHM mast: (2t, 2.5t model) 400mm/s with load. 350mm/s without load. Overall Vehicle lenght with VFM mast: +15mm longer than of STD model with VM mast

19 Wide view Full Free 2-stage VFW (4CYLINDER) FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 Overall (2) Raised with Lowered (3) Free lift with F/B FHG 20T3 FHG 20C3 (4) Service Weight (kg) FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VFW VFW VFW VFW * *1900 * VFW * *1900 *1900 *2350 * Figures for (2t, 2.5t model); For (3t model) +80mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -145mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Wide view Full Free 3-stage VFHW (4CYLINDER) FHG / D20T3 FHG / D20C3 FHG / D25T3 FHG / D25C3 FHG / D30T3 FHG / D30C3 Overall (2) Raised with Lowered (3) Free lift with F/B FHG 20T3 FHG 20C3 (4) Service Weight (kg) FHG 25T3 FHG 25C3 FHG 30T3 FHG 30C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD SDD S DD SDD S DD SDD VHW * *1900 *1900 *2400 *2400 * VHW * *1900 *1900 *2300 *2300 * VHW * *1800 *1800 *2250 *2250 * VHW *1750 *1750 *2150 *2150 *2650 *2650 VHW *1750 *1750 *2100 *2100 *2600 *2600 Figures for (2t, 2.5t model); For (3t model) +80mm (2) Figures for (2t, 2.5t model); For (3t model) +230mm. For height without backrest: (2t, 2.5t model) -455mm, (3t model) -580 mm (3) Figures for (2t, 2.5t model); For (3t model) -145mm. For free lift without backrest: (2t, 2.5t model) +455mm, (3t model) +580 mm. Weight for without backrest: (2t, 2.5t model) -20kg, (3t model) -30 kg (4) Weight for diesel model: (2t model) +120kg, (2.5t model) +120kg, (3t model) +130 kg. Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed with VFM/VFHM : with VFM FG (2t, 2.5t model) 450mm/s with load. 490mm/s without load. FD (2t, 2.5t model) 510mm/s with load. 540mm/s without load. FG (3t model) 410mm/s with load. 470mm/s without load. FD (3t model) 430mm/s with load. 460mm/s without load. with VFHM FG (2t, 2.5t model) 460mm/s with load. 510mm/s without load. FD (2t, 2.5t model) 530mm/s with load. 560mm/s without load. FG (3t model) 430mm/s with load. 460mm/s without load. FD (3t model) 450mm/s with load. 480mm/s without load. Lowering speed with VFM/VFHM mast: (2t, 2.5t, 3t model) 400mm/s with load. 350mm/s without load. Overall Vehicle lenght with VFW/VFHW (4cylinder) mast (2t, 2,5t model): +35mm longer than of STD model with VM mast (3t model): +35mm/+45mm longer than of STD model with VM mast

20 SPECIFICATIONS -- 3,5 ton Wide view VM Overall F / B (3) Service weight (kg) Raised with FD35T3S Lowered FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm deg S DD VM / VM / VM / VM / VM / VM VM VM VM VM VM VM550 *3200 * *3 / VM600 *2400 * *3 / Wide View Full Free 2-stage VFM (3) Overall (2) Free lift Service weight (kg) Raised with FD35T3S Lowered with F / B FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD VFM / VFM / VFM / VFM / VFM / VFM VFM VFM VFM VFM VFM VFM550 *3200 * *3 / VFM600 *2400 * *3 / For height without backrest: -445mm (2) For free lift without backrest: +455mm Weight for diesel model: -30kg Wide View Full Free 3-stage VFHM (3) Overall (2) Free lift Service weight (kg) Raised with FD35T3S Lowered with F / B FD35T3S PNEUMATIC UNIQUE(SE) mm mm mm mm deg S DD VFHM *6 / VFHM *6 / VFHM *6 / VFHM *6 / VFHM *6 / VFHM * * / 6 *3 / VFHM * * / 6 *3 / VFHM 650 *2000 * / VFHM 700 *1600 * / For height without backrest: -530mm (2) For free lift without backrest: +530mm Weight for diesel model: -30kg Rated Capacity with (*): Shows capacity with DD: front dual tires. Lifting Speed with VFM/VFHM : with VFM 530mm/s with load. 560mm/s without load. with VFHM 560mm/s with load. 580mm/s without load. Lowering speed with VFM/VFHM mast: 440mm/s with load. 380mm/s without load. Overall Vehicle lenght with VFHM mast: +15mm longer than of STD model with VM/VFM mast

21 STANDARD DIMENSIONS (Front Single Tire) GROUND CLEARANCE FD/FG15 FHD/FHG15 FD/FG18 FHD/FHG18 mm mm Frame Front axle Rear axle Counter weight FD/FG15 FHD/FHG15 FD/FG18 FHD/FHG18 mm mm Overall height, raised (with backrest) fork height height, lowered height Free lift thickness Min. ground clearance Overall length (with fork) Length to fork face length Load distance Wheelbase Rear overhang Drawbar Pin Center Overhead guard clearance (from face of seat)** FD / FG15 18 = 1035 FHD / FHG15 18 = 1005 Overall height (overhead guard)** Overall width spread (outside) Tread (front) Tread (rear) width Inside turning radius Outside turning radius Min. intersecting aisle Tilt angles (forward-backward) ** European (EXE) and Scandinavian export trucks (EXN): +60mm DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option) FD/FG15 FHD/FHG15 FD/FG18 FHD/FHG18 Tire size (front dual Type: DD) 4 x 4, PR JL mm mm Overall width Tread (front) Inside turning radius Outside turning radius Min. intersecting aisle Tire size (front dual Type: SDD) 4 x 6, PR JL mm mm Overall width Tread (front) Inside turning radius Outside turning radius Min. intersecting aisle

22 STANDARD DIMENSIONS (Front Single Tire) GROUND CLEARANCE FD/FG20-25 FD/FG30 FHD/FHG20-25 FHD/FHG30 FD35T3S mm mm mm Frame Front axle Rear axle Counter weight FD/FG20 FHD/FHG20 FD/FG25 FHD/FHG25 FD/FG30 FHD/FHG30 FD35T3S mm mm mm mm Overall height, raised (with backrest) fork height height, lowered height Free lift thickness Min. ground clearance Overall length (with fork) Length to fork face length Load distance Wheelbase Rear overhang Drawbar Pin Center Overhead guard clearance (from face of seat)** Overall height (overhead guard)** Overall width spread (outside) Tread (front) Tread (rear) width Inside turning radius Outside turning radius Min. intersecting aisle Tilt angles (forward-backward) ** European (EXE) and Scandinavian export trucks (EXN): +60mm DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option) FD/FG20 FHD/FHG20 FD/FG25 FHD/FHG25 FD/FG30 FHD/FHG30 FD35T3S Tire size (front dual Type: DD) 4 x 5, PR (l) 4 x 6, PR (l) mm mm mm mm Overall width Tread (front) Inside turning radius Outside turning radius Min. intersecting aisle Tire size (front dual Type: SDD) 4 x 7, PR (l) 4 x 28 x PR (l) mm mm mm mm Overall width Tread (front) Inside turning radius Outside turning radius Min. intersecting aisle

23 STANDARD SPECIFICATIONS Gasoline -- 1,5-1,8 ton Engine and Transmission Chassis Weight Performance Dimensions Characteristics I Manufacturer TCM 2 FG15C13 FG15T13 FG18C13 FG18T13 3 Load Capacity kg Load Center mm Power Type Gasoline 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum mm Free Lift mm Size L x W x T mm 920 x 100 x 35 Spread (Outside) / Min. mm 920 / Tilt Fwd / Bwd deg Length to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm 2070 Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm Basic Right Stacking Aisle Width mm (Add load length and clearance) 24 Speeds Travel Full load km/h 14.0 / 14.0 (Fwd/Rvs.) No load km/h 14.5 / Lifting Full load mm/s 590 No load mm/s Lowering Full load mm/s 450 No load mm/s Drawbar Pull Full load kn No load kn Gradeability* Full load % No load % Total Weight kg Weight Distribution Full load Front kg Rear kg No load Front kg Rear kg Tires Number Front / Rear 2 / 2 36 Size Front PR 37 Rear PR 38 Wheelbase mm Tread Front mm Rear mm 920 mm 1045 Overhead Guard Clearance mm 1035 Counterweight mm 1110 Drawbar Pin Center mm 495 Step / Floor mm 420 / Underclearance Min. with load mm Center of Wheelbase mm Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / Internal Combustion Engine Make/ NISSAN K15 Rated Horsepower / r.p.m. kw 25.0 / 2250 Rated Torque / r.p.m. N m / Number of Cylinder 4 52 Piston Displacement cc 1486 Alternator output kw/amp 0.60 / 50 Fuel Tank Capacity Type lit Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs Operating Pressure For Attachments MPa (psi) 17.7 *Computed values

24 Characteristics Dimensions Performance Weight Chassis Engine and Transmission I Manufacturer TCM 2 FHG15C3 FHG15T3 FHG18C3 FHG18T3 3 Load Capacity kg Load Center mm Power Type Gasoline 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum mm Free Lift mm Size L x W x T mm 920 x 100 x 35 Spread (Outside) / Min. mm 920 / Tilt Fwd / Bwd deg Length to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm 2070 Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm Basic Right Stacking Aisle Width mm (Add load length and clearance) 24 Speeds Travel Full load km/h 18.5 / / / / 19.0 (Fwd/Rvs.) No load km/h 19.0 / / / / Lifting Full load mm/s 600 No load mm/s Lowering Full load mm/s 450 No load mm/s Drawbar Pull Full load kn No load kn Gradeability* Full load % No load % Total Weight kg Weight Distribution Full load Front kg Rear kg No load Front kg Rear kg Tires Number Front / Rear 2 / 2 36 Size Front PR 37 Rear PR 38 Wheelbase mm Tread Front mm Rear mm 920 mm 1045 Overhead Guard Clearance mm 1005 Counterweight mm 1110 Drawbar Pin Center mm 495 Step / Floor mm 420 / Underclearance Min. with load mm Center of Wheelbase mm Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / Internal Combustion Engine Make/ NISSAN K21 Rated Horsepower / r.p.m. kw 34.6 / 2250 Rated Torque / r.p.m. N m / Number of Cylinder 4 52 Piston Displacement cc 2065 Alternator output kw/amp 0.60 / 50 Fuel Tank Capacity Type lit Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs Operating Pressure For Attachments MPa (psi) 17.7 *Computed values

25 STANDARD SPECIFICATIONS Gasoline ton Characteristics Dimensions Performance Weight Chassis & Wheels Engine & Transmission 1 Manufacturer TCM 2 FG20C3 FG20T3 FG25C3 FG25T3 FG30C3 FG30T3 3 Load Capacity kg Load Center mm Power type Gasoline Gasoline Gasoline 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 9 Maximum mm Free Lift mm Size L x W x T mm 1070 x 122 x x 122 x x 125 x 45 Spread (Outside) / Min. mm 1020 / / / Tilt Fwd / Bwd deg 6 / 12 6 / 12 6 / Lenght to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance (Centerline of Axle to Front Face of s) mm Rear Overhang mm Basic Right Stacking Aisle Width (Add load length and clearance)) mm Speeds Lifting 26 Lowering 28 Drawbar Pull 29 Gradeability* *Computed values Travel (Fwd. / Rvs.) Full Load km/h 18,5 18,5 19 No Load km/h ,5 Full Load mm/s No Load mm/s Full Load mm/s No Load mm/s Full Load kn 12,3 16,7 12,3 16,7 10,8 14,2 No Load kn 8,3 8,3 9,8 Full Load % No Load % Total Weight kg Front kg Full Load Rear kg Weight Distribution Front kg No Load Rear kg Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Tires Front 7, PR (l) 7, PR (l) 28 x PR (l) Size 37 Rear 6, PR (l) 6, PR (l) 6, PR (l) 38 Wheelbase mm Tread Front mm Rear mm mm Overhead Guard Clearance mm Counterweight mm Drawbar Pin Center mm Step / Floor mm 435 / / / Underclearance Minimum Full Load mm Center of wheelbase mm Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V / AH 12 / / / Make - NISSAN / K21 NISSAN / K21 NISSAN / K21 50 Rated Horsepower / r.p.m. kw 34,6 / ,6 / ,6 / Rated Torque / r.p.m. N-m 153,5 / ,5 / ,5 / 1600 Internal Combustion Engine Number of Cylinder Piston Displacement cc Alternator output kw/amp 0,60 / 50 0,60 / 50 0,60 / 50 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs Operating Pressure For attachment MPa 17,7 17,7 17,7

26 Characteristics Dimensions Performance Weight Chassis & Wheels Engine & Transmission 1 Manufacturer TCM 2 FHG20C3 FHG20T3 FHG25C3 FHG25T3 FHG30C3 FHG30T3 3 Load Capacity kg Load Center mm Power type Gasoline Gasoline Gasoline 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 9 Maximum mm Free Lift mm Size L x W x T mm 1070 x 122 x x 122 x x 125 x 45 Spread (Outside) / Min. mm 1020 / / / Tilt Fwd / Bwd deg 6 / 12 6 / 12 6 / Lenght to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance (Centerline of Axle to Front Face of s) mm Rear Overhang mm Basic Right Stacking Aisle Width (Add load length and clearance)) mm Speeds Lifting 26 Lowering 28 Drawbar Pull 29 Gradeability* *Computed values Travel (Fwd. / Rvs.) Full Load km/h 18,5 18,5 19 No Load km/h ,5 Full Load mm/s No Load mm/s Full Load mm/s No Load mm/s Full Load kn 14,2 22,1 14,2 22,1 12,7 19,6 No Load kn 8,3 8,3 9,8 Full Load % No Load % Total Weight kg Front kg Full Load Rear kg Weight Distribution Front kg No Load Rear kg Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Tires Front 7, PR (l) 7, PR (l) 28 x PR (l) Size 37 Rear 6, PR (l) 6, PR (l) 6, PR (l) 38 Wheelbase mm Tread Front mm Rear mm mm Overhead Guard Clearance mm Counterweight mm Drawbar Pin Center mm Step / Floor mm 435 / / / Underclearance Minimum Full Load mm Center of wheelbase mm Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V / AH 12 / / / Make - NISSAN / K25 NISSAN / K25 NISSAN / K25 50 Rated Horsepower / r.p.m. kw 39,5 / ,5 / ,5 / Rated Torque / r.p.m. N-m 188,1 / ,1 / ,1 / 1600 Internal Combustion Engine Number of Cylinder Piston Displacement cc Alternator output kw/amp 0,60 / 50 0,60 / 50 0,60 / 50 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs Operating Pressure For attachment MPa 17,7 17,7 17,7

27 STANDARD SPECIFICATIONS Diesel ton Characteristics Dimensions Performance Weight Chassis Engine and Transmission I Manufacturer TCM 2 FD15C13 FD15T13 FD18C13 FD18T13 3 Load Capacity kg Load Center mm Power Type Diesel 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum mm Free Lift mm Size L x W x T mm 920 x 100 x 35 Spread (Outside) / Min. mm 920 / Tilt Fwd / Bwd deg Length to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm 2070 Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm Basic Right Stacking Aisle Width mm (Add load length and clearance) 24 Speeds Travel Full load km/h 13.5 / 13.5 (Fwd/Rvs.) No load km/h 14.0 / Lifting Full load mm/s 530 No load mm/s Lowering Full load mm/s 450 No load mm/s Drawbar Pull Full load kn No load kn Gradeability* Full load % No load % Total Weight kg Weight Distribution Full load Front kg Rear kg No load Front kg Rear kg Tires Number Front / Rear 2 / 2 36 Size Front PR 37 Rear PR 38 Wheelbase mm Tread Front mm Rear mm 920 mm 1045 Overhead Guard Clearance mm 1035 Counterweight mm 1110 Drawbar Pin Center mm 495 Step / Floor mm 420 / Underclearance Min. with load mm Center of Wheelbase mm Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / Internal Combustion Engine Make/ KUBOTA D1503 Rated Horsepower / r.p.m. kw 21.3 / 2500 Rated Torque / r.p.m. N m 98 / Number of Cylinder 3 52 Piston Displacement cc 1499 Alternator output kw/amp 0.54 / 45 Fuel Tank Capacity Type lit Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs Operating Pressure For Attachments MPa (psi) 17.7 *Computed values

28 Characteristics Dimensions Performance Weight Chassis Engine and Transmission I Manufacturer TCM 2 FHG15C3 FHG15T3 FHG18C3 FHG18T3 3 Load Capacity kg Load Center mm Power Type Diesel 6 Operation Position Seated 7 Tire Type Front / Rear Pneumatic 8 Wheels (X=driven) Front / Rear 2X / 2 9 Maximum mm Free Lift mm Size L x W x T mm 920 x 100 x 35 Spread (Outside) / Min. mm 920 / Tilt Fwd / Bwd deg Length to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm 2070 Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance mm 395 (Centerline of front axle to front face of forks) Rear Overhang mm Basic Right Stacking Aisle Width mm (Add load length and clearance) 24 Speeds Travel Full load km/h 18.5 / / / / 19.0 (Fwd/Rvs.) No load km/h 19.0 / / / / Lifting Full load mm/s 620 No load mm/s Lowering Full load mm/s 450 No load mm/s Drawbar Pull Full load kn No load kn Gradeability* Full load % No load % Total Weight kg Weight Distribution Full load Front kg Rear kg No load Front kg Rear kg Tires Number Front / Rear 2 / 2 36 Size Front PR 37 Rear PR 38 Wheelbase mm Tread Front mm Rear mm 920 mm 1045 Overhead Guard Clearance mm 1005 Counterweight mm 1110 Drawbar Pin Center mm 495 Step / Floor mm 420 / Underclearance Min. with load mm Center of Wheelbase mm Brake Service (Foot) Hydraulic - Foot pedal 43 Parking Mechanical - Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / Internal Combustion Engine Make/ NISSAN DIESEL TD27 - II Rated Horsepower / r.p.m. kw 42.0 / 2400 Rated Torque / r.p.m. N m 170 / Number of Cylinder 4 52 Piston Displacement cc 2663 Alternator output kw/amp 0.72 / 60 Fuel Tank Capacity Type lit Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs Operating Pressure For Attachments MPa (psi) 17.7 *Computed values

29 STANDARD SPECIFICATIONS Diesel , ,5 ton Engine & Transmission Chassis & Wheels Weight Performance Dimensions Characteristics 1 Manufacturer TCM 2 FD20C3 FD20T3 FD25C3 FD25T3 3 Load Capacity kg Load Center mm Power type Diesel Diesel 6 Operator Position Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 9 Maximum mm Free Lift mm Size L x W x T mm 1070 x 122 x x 122 x 40 Spread (Outside) / Min. mm 1020 / / Tilt Fwd / Bwd deg 6 / 12 6 / Lenght to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance (Centerline of Axle to Front Face of s) mm Rear Overhang mm Basic Right Stacking Aisle Width (Add load length and clearance)) mm Speeds Lifting 26 Lowering 28 Drawbar Pull 29 Gradeability* Travel (Fwd. / Rvs.) Full Load km/h 18, ,5 18 No Load km/h 19 18, ,5 Full Load mm/s No Load mm/s Full Load mm/s No Load mm/s Full Load kn 13,7 19,1 13,7 19,1 No Load kn 8,3 8,3 Full Load % No Load % Total Weight kg Front kg Full Load Rear kg Weight Distribution Front kg No Load Rear kg Number Front / Rear 2 / 2 2 / 2 36 Tires Front 7, PR (l) 7, PR (l) Size 37 Rear 6, PR (l) 6, PR (l) 38 Wheelbase mm Tread Front mm Rear mm mm Overhead Guard Clearance mm Counterweight mm Drawbar Pin Center mm Step / Floor mm 435 / / Minimum Full Load mm Underclearance 41 Center of wheelbase mm Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Brake 43 Parking Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V / AH 12 / / Make - NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II 50 Rated Horsepower / r.p.m. kw 42,0 / ,0 / Rated Torque / r.p.m. N-m 170 / / 2300 Internal Combustion Engine Number of Cylinder Piston Displacement cc Alternator output kw/amp 0,72 / 60 0,72 / 60 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Power-shift Stage Fwd - Rvs Operating Pressure For attachment MPa 17,7 17,7

30 Engine & Transmission Chassis & Wheels Weight Performance Dimensions Characteristics 1 Manufacturer TCM 2 FD30C3 FD30T3 FD35T3S 3 Load Capacity kg Load Center mm Power type Diesel Diesel 6 Operator Position Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 9 Maximum mm Free Lift mm Size L x W x T mm 1070 x 122 x x 150 x 50 Spread (Outside) / Min. mm 1090 / / Tilt Fwd / Bwd deg 6 / 12 6 / Lenght to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance (Centerline of Axle to Front Face of s) mm Rear Overhang mm Basic Right Stacking Aisle Width (Add load length and clearance)) mm Speeds Lifting 26 Lowering 28 Drawbar Pull 29 Gradeability* Travel (Fwd. / Rvs.) Full Load km/h No Load km/h 19,5 19,5 Full Load mm/s No Load mm/s Full Load mm/s No Load mm/s Full Load kn 12,7 17,2 18,1 No Load kn 9,8 10,8 Full Load % No Load % Total Weight kg Front kg Full Load Rear kg Weight Distribution Front kg No Load Rear kg Number Front / Rear 2 / 2 2 / 2 36 Tires Front 28 x PR (l) 7, PR (l) Size 37 Rear 6, PR (l) 6, PR (l) 38 Wheelbase mm Tread Front mm 970 Rear mm mm Overhead Guard Clearance mm Counterweight mm Drawbar Pin Center mm Step / Floor mm 460 / / Minimum Full Load mm Underclearance 41 Center of wheelbase mm Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Brake 43 Parking Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V / AH 12 / / Make - NISSAN DIESEL / TD27-II NISSAN DIESEL / TD27-II 50 Rated Horsepower / r.p.m. kw 42,0 / ,0 / Rated Torque / r.p.m. N-m 170 / / 2300 Internal Combustion Engine Number of Cylinder Piston Displacement cc Alternator output kw/amp 0,72 / 60 0,72 / 60 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Stage Fwd - Rvs Operating Pressure For attachment MPa 17,7 17,7

31 Engine & Transmission Chassis & Wheels Weight Performance Dimensions Characteristics 1 Manufacturer TCM 2 FHD20C3 FHD20T3 FHD25C3 FHD25T3 FHD30C3 FHD30T3 3 Load Capacity kg Load Center mm Power type Diesel Diesel Diesel 6 Operator Position Seated Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic Pneumatic 8 Wheels (X=driven) Front / Rear 2x / 2 2x / 2 2x / 2 9 Maximum mm Free Lift mm Size L x W x T mm 1070 x 122 x x 122 x x 125 x 45 Spread (Outside) / Min. mm 1020 / / / Tilt Fwd / Bwd deg 6 / 12 6 / 12 6 / Lenght to Face mm Overall Width mm Lowered mm Raised mm Overhead Guard (EXB, EXK) mm Overhead Guard (EXC, EXE, EXN) mm Operator s Seat mm Turning Radius (Outside) mm Load Distance (Centerline of Axle to Front Face of s) mm Rear Overhang mm Basic Right Stacking Aisle Width (Add load length and clearance)) mm Speeds Lifting 26 Lowering 28 Drawbar Pull 29 Gradeability* Travel (Fwd. / Rvs.) Full Load km/h No Load km/h 18,5 18,5 19,5 Full Load mm/s No Load mm/s Full Load mm/s No Load mm/s Full Load kn 15,7 26,5 15,7 26,5 14,8 13,5 No Load kn 8,3 8,3 9,8 Full Load % No Load % Total Weight kg Front kg Full Load Rear kg Weight Distribution Front kg No Load Rear kg Number Front / Rear 2 / 2 2 / 2 2 / 2 36 Tires Front 7, PR (l) 7, PR (l) 28 x PR (l) Size 37 Rear 6, PR (l) 6, PR (l) 6, PR (l) 38 Wheelbase mm Tread Front mm Rear mm mm Overhead Guard Clearance mm Counterweight mm Drawbar Pin Center mm Step / Floor mm 435 / / / Underclearance Minimum Full Load mm Center of wheelbase mm Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V / AH 12 / / / Make - KUBOTA / V3300 KUBOTA / V3300 KUBOTA / V Rated Horsepower / r.p.m. kw 50 / / / Rated Torque / r.p.m. N-m 226,4 / ,4 / ,4 / 1800 Internal Combustion Engine Number of Cylinder Piston Displacement cc Alternator output kw/amp 0,54 / 45 0,54 / 45 0,54 / 45 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Power-shift Manual Power-shift Stage Fwd - Rvs Operating Pressure For attachment MPa 17,7 17,7 17,7

32 CAPACITY / LOADCENTER The products manufactures at TCM plant got ISO 9001 & certificates