Multiple distributors QS, Quick Star
|
|
- Martha Clarke
- 5 years ago
- Views:
Transcription
1 Multiple distributors QS, Quick Star Easy to insert Easy to release Up to 6 outlets 360 rotatable 2016/01 Subject to change Internet: 1
2 Multiple distributors QS, Quick Star Key features Simply "plug and work" Reliably connected Captive seal Orientable The stainless steel retaining claw within the fitting holds the tubing securely without damaging its surface. Vibration and pressure surges are safely absorbed. The tubing can be detached easily by pressing down the blue release ring. For your convenience, the appropriate outside tubing diameter is marked on the release ring. A nitrile rubber sealing ring guarantees a perfect seal between standard OD tubing and the body of the fitting. Standard tubing is suitable for use with compressed air and vacuum. All brass parts of Festo s push-in fittings are nickel plated and are thus highly resistant to corrosion. The tapered ISO s have a selfsealing PTFE coating, which allows the fitting to be re-used up to five times without the need for additional sealing components. The fitting can be aligned after assembly. Which fitting fits which thread? to ISO Shorter thread Constant installation depth Replaceable sealing ring Sealing at front Can be re-used a number of times thanks to replaceable sealing ring to EN and ISO 7/1 Self-sealing thread Sealing on the threads No additional sealing surface required Smaller installation dimensions since there is no need for a rebate for the sealing surface Can be re-used up to five times G male thread R male thread G female thread G female thread R female thread 2 Internet: Subject to change 2016/01
3 Multiple distributors QS, Quick Star General technical data Size Design structure Assembly position Type of seal on threaded plug Standard Push/pull principle Any Sealing ring () Coating () Operating and environmental conditions Operating pressure [bar] complete temperature range Temperature dependent [bar] diagram operating pressure Operating medium Compressed air in accordance with ISO :2010 [7: : ] Water as per manufacturer's declaration 1) Note on operating/pilot medium Operation with lubricated medium possible Ambient temperature [ C] Corrosion resistance class CRC 2) 1 Certification Germanischer Lloyd 1) Additional information User documentation. 2) Corrosion resistance class CRC 1 to Festo standard FN Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions). Operating pressure p as a function of temperature t p [bar] t [ C] Materials Sectional view Multiple distributor 1 Release ring POM (colour: blue) 2 Seal NBR 3 Housing PBT 4 Tube clamping segment High alloy stainless steel 5 Threaded coupling Nickel plated brass Note on materials RoHS-compliant /01 Subject to change Internet: 3
4 Multiple distributors QS, Quick Star Tightening torque Connecting thread Gx 7 ±20% G¼ 9 ±20% Gy 15.5 ±20% G½ 26 ±20% Nominal tightening torque [Nm] Tubing insertion depth Tubing O.D. [mm] Tubing insertion depth [mm] Possible push-in fitting/tubing combinations Thread Tubing O.D. [mm] Rx R¼ Ry R½ ++ Gx G¼ Gy G½ ++ + Possible thread/tubing O.D. combinations ++ Optimum thread/tubing O.D. combinations (with regard to flow) 4 Internet: Subject to change 2016/01
5 Multiple distributors QS, Quick Star Product range overview Shape Design Type Connection D1 Connection D2 Connection D3 Page/ Tubing O.D. Tubing O.D. Tubing O.D. Internet L-shape Multiple distributor, 2 outlets QSLV2 Rx Gx 4, 6, 8 6 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 3 outlets QSLV3 Rx Gx 4, 6, 8 7 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 4 outlets QSLV4 Rx Gx 4, 6, 8 8 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 6 outlets QSLV6 Rx Gx 4, 6, 8 9 R¼ G¼ 6, 8, 10 Ry Gy 8, 10, 12 R½ G½ 12 Multiple distributor, 4 outlets QSQ Rx Gx 4, 6 10 R¼ G¼ 4, 6 QSQ T-shape Multiple distributor, 4 outlets QST3 Rx Gx R¼ G¼ 8 6 Ry Gy 10 8 QST /01 Subject to change Internet: 5
6 Multiple distributors QSLV2, Quick Star Multiple distributor QSLV2 No. of outlets: 2 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV2-x QSLV2-x QSLV2-x-8 1 R¼ QSLV2-¼ QSLV2-¼ QSLV2-¼-10 1 Ry QSLV2-y QSLV2-y QSLV2-y-12 1 R½ QSLV2-½-12 1 with sealing ring Gx QSLV2-Gx QSLV2-Gx QSLV2-Gx-8 1 G¼ QSLV2-G¼ QSLV2-G¼ QSLV2-G¼-10 1 Gy QSLV2-Gy QSLV2-Gy QSLV2-Gy-12 1 G½ QSLV2-G½ Internet: Subject to change 2016/01
7 Multiple distributors QSLV3, Quick Star Multiple distributor QSLV3 No. of outlets: 3 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV3-x QSLV3-x QSLV3-x-8 1 R¼ QSLV3-¼ QSLV3-¼ QSLV3-¼-10 1 Ry QSLV3-y QSLV3-y QSLV3-y-12 1 R½ QSLV3-½-12 1 with sealing ring Gx QSLV3-Gx QSLV3-Gx QSLV3-Gx-8 1 G¼ QSLV3-G¼ QSLV3-G¼ QSLV3-G¼-10 1 Gy QSLV3-Gy QSLV3-Gy QSLV3-Gy-12 1 G½ QSLV3-G½ /01 Subject to change Internet: 7
8 Multiple distributors QSLV4, Quick Star Multiple distributor QSLV4 No. of outlets: 4 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 B1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV4-x QSLV4-x QSLV4-x-8 1 R¼ QSLV4-¼ QSLV4-¼ QSLV4-¼-10 1 Ry QSLV4-y QSLV4-y QSLV4-y-12 1 R½ QSLV4-½-12 1 with sealing ring Gx QSLV4-Gx QSLV4-Gx QSLV4-Gx-8 1 G¼ QSLV4-G¼ QSLV4-G¼ QSLV4-G¼-10 1 Gy QSLV4-Gy QSLV4-Gy QSLV4-Gy-12 1 G½ QSLV4-G½ Internet: Subject to change 2016/01
9 Multiple distributors QSLV6, Quick Star Multiple distributor QSLV6 No. of outlets: 6 Connection Nominal Tubing O.D. H1 H2 H3 H4 H5 L1 B1 ß1 Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSLV6-x QSLV6-x QSLV6-x-8 1 R¼ QSLV6-¼ QSLV6-¼ QSLV6-¼-10 1 Ry QSLV6-y QSLV6-y QSLV6-y-12 1 R½ QSLV6-½-12 1 with sealing ring Gx QSLV6-Gx QSLV6-Gx QSLV6-Gx-8 1 G¼ QSLV6-G¼ QSLV6-G¼ QSLV6-G¼-10 1 Gy QSLV6-Gy QSLV6-Gy QSLV6-Gy-12 1 G½ QSLV6-G½ /01 Subject to change Internet: 9
10 Multiple distributors QSQ, Quick Star Multiple distributor QSQ No. of outlets: 4 1 Sealing ring Reducing Connection Nominal Tubing O.D. B1 D6 D7 L1 L2 L4 L6 ß Weight/ piece D1 [mm] D2 [g] Part No. Type PU* Rx QSQ-x QSQ-x-6 1 R¼ QSQ-¼ QSQ-¼-6 1 with sealing ring Gx QSQ-Gx QSQ-Gx-6 1 G¼ QSQ-G¼ QSQ-G¼-6 1 Reducing QSQ QSQ Internet: Subject to change 2016/01
11 Multiple distributors QST3, Quick Star Multiple distributor QST3 No. of outlets: 4 Reducing Connection Nominal Tubing O.D. D6 D7 H1 H2 L1 L2 L3 L4 L5 L6 ß Weight Part No. Type PU* D1 [mm] D2 D3 [g] Rx QST3-x R¼ QST3-¼ Ry QST3-y with sealing ring Gx QST3-Gx G¼ QST3-G¼ Gy QST3-Gy Reducing QST QST QST /01 Subject to change Internet: 11
Multiple distributors QS
Multiple distributors QS Easy to insert Easy to release Up to 6 outlets 360 rotatable 2018/07 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS Key features Simply "plug
More informationSelf-closing/rotary push-in fittings QS
Self-closing/rotary push-in fittings QS Self-closing/rotary push-in fittings QS Key features Application Simply plug and work Reliably connected Captive seal Effortless selection of the right fitting.
More informationPush-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
More informationPush-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
More informationPush-in fittings and connectors QS
Push-in fittings and connectors QS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
More informationPush-in fittings and connectors QS
Push-in fittings and connectors QS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
More informationCartridge fittings QSP, NPT
General technical data Size Design Mounting position Mini Standard Push-pull principle Any Operating and environmental conditions Operating pressure for [bar] 0.95 +10 entire temperature range Operating
More informationCartridge fittings QSP
fittings QSP fittings QSP General technical data Size Design Mounting position Type of seal on threaded plug Mini Standard Push-pull principle Any O-ring Operating and environmental conditions fitting
More informationCheck valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationPush-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN 12 mm Internet:
More informationPush-in fittings NPQM
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationFlow control valves GRO, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal Flow control function connection 2 connection 1 qnn 1) [l/min]
More information-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function
Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with
More information-H- Note. Clip fix tool AGTC Key features
Key features At a glance Principle The clip fix tool AGTC is a pneumatic mounting device for clips of different designs. Pressing the clip fix tool with attached clip adapter 1) and clip against the chosen
More informationSilencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationPush-in fittings NPQP
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationVacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationPush-in fittings CRQS, stainless steel, NPT
General technical data Size Standard Design Push-pull principle Mounting position An Max. tightening torque [ft-lbf] 8.851 at male thread NPTF1/8-27 11.801 at male thread NPTF1/4-18 13.276 at male thread
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More information-H- Note. Silencers Product range overview. Version Type Connection D1 Push-in connector. For tubing I.D. Push-in sleeve diameter.
Silencers Silencers Product range overview Version Type Connection Push-in connector Sintered metal For tubing I.D. Push-in sleeve diameter Noise level M thread G thread NPT thread [db (A)] U-PK-3 3 70
More informationBall valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
More informationProportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
More informationSuction cups VAS/VASB
s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More informationStandard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
More informationStandard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug
More informationSemi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
More informationPre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationFittings NPCK Key features
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationSolenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationFeed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
More informationHygienic butterfly valves VZFB
Product range overview Version Type Based on standard Nominal width DN Process valve nominal pressure PN With clamp CC VZFB-A ASME BPE 1 10 4 1½ 2 2½ 3 4 Page With welded end WW VZFB-D DIN 11851 DN25 10
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationOn-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
More informationSolenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
More informationClamping cartridges/units
Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More informationLubricators LOE, D series
Lubricators LOE, D series Product range overview D series service units, metal design Type Size Pneumatic connection Pressure regulation range [bar] Grade of filtration [μm] M5 M7 Gx G¼ Gy G½ G¾ G QS4
More informationCPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More information-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
More informationBranching modules FRM/Distributor blocks FRZ, D series
Branching modules FRM/Distributor blocks FRZ, D series Branching modules FRM/Distributor blocks FRZ, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic
More informationRound cylinders DSNU/DSNUP/DSN/ESNU/ESN
Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Round cylinders DSNU/DSNUP/DSN/ESNU/ESN Key features At a glance DSNU-8 63 DSNU-8 25 Stainless steel piston rod Good running performance and long service Piston
More informationPneumatic components for high-pressure applications
Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct
More informationAngle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
More informationPositioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationCompact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationPiston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
More informationSolenoid valves MFHE/Pneumatic valves VLHE
Solenoid valves MFHE/Pneumatic valves VLHE Solenoid valves MFHE/Pneumatic valves VLHE Peripherals overview 2 1 4 3 5 Accessories MFHE VLHE Page/Internet 1 Solenoid coil MSFG/MSFW 8 2 Plug socket with cable
More informationSuction cup holders ESH
Suction cup holders ESH Suction cup holders ESH Type codes ESH HCL 4 QS Type ESH Suction cup holder Suction cup holder HA HB HC HCL HD HDL HE HF Vacuum port on top, mounting via lock nut, without height
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationMounting kits SAMH-S
Key features and type codes Function Tamper-proof mounting of proximity sensors of the type SME-8M or SMT-8M-A. These mounting kits fulfil the applicable requirements of EN ISO 13849-2 for mechanical systems:
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationSolenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
More informationQuarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationAccessories for electrical positioning systems
Accessories for electrical positioning systems Accessories for electrical positioning systems Features At a glance Bellows couplings EAMC-B page 3 One-piece coupling with threaded pin locking, suitable
More informationQuarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More information-Q- Temperature range C. -L- Operating pressure bar CRVZS-5/10/20 with condensate drain. Air reservoirs CRVZS Technical data
Air reservoirs Air reservoirs CRVZS Function CRVZS-0.1/0.4/0.75/2 -Q- Temperature range 10 +100 C -L- Operating pressure 0.95 16 bar CRVZS-5/10/20 with condensate drain The reservoirs can be used to compensate
More informationProportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
More informationSwivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
More informationPneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
More informationSolenoid coils VACF Type codes
Solenoid coils VACF Type codes VACF B B2 1A Type VACF Solenoid coil, F series Solenoid coil type A B Width 30 mm, for 8 mm armature tube Width 22 mm, for 8 mm armature tube A1 Connection pattern type A,
More informationUniversal plug connectors, for self-assembly
Universal plug connectors, for self-assembly Universal plug connectors, for self-assembly Product range overview Function Version Type Connection technology Connection cross section Degree of [mm 2 ] protection
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationGuided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationRadial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
More informationOn-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
More informationSolenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU Reacts quickly thanks to minimal break-away force Meets the highest requirements for running characteristics, service life and load carrying ability Extensive range of accessories
More informationRound cylinders DSNU/ESNU
Round cylinders DSNU/ESNU q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationGuided drives DGRF-C, Clean Design
Features and Product range overview At a glance The guided drive is used wherever hygiene, ease of cleaning and resistance are important, predominantly in dry and splash zones in the food and packaging
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD Quarter turn actuators DFPD Key features Function The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range.
More informationPneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationGuided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationStandard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24562, NF E 49 003.1 and UNI 10290) The standard cylinder is used
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationLinear drive units DGO
Features General information Double-acting Magnetically coupled without mechanical connections Piston chamber and slide are pressure tight Pressure tight and leak-free system Dirt and dust cannot enter
More informationQuarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationSilencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
More information-U- Type discontinued
Key features At a glance -V- New Sturdier Optimised end stop system Optimised intermediate position module Minimised susceptibility to wear One-way flow control valves that can be externally adjusted Integrated
More informationPinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
More informationPassive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationVacuum generators OVEM
Key features At a glance Rapid purging of vacuum for safe placement of the workpiece by means of an integrated solenoid valve for controlling the ejector pulse Central electrical connection via an M12
More informationLubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
More informationSolenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationPressure and vacuum switches PEV/VPEV
Pressure and vacuum switches PEV/VPEV Pressure and vacuum switches PEV/VPEV Product range overview Function Design Type Operating pressure Pneumatic connection Mechanical pressure switches Electrical connection
More informationMini slides DGSC Key features
Key features At a glance Properties Smallest guided slide unit (width 8 mm), therefore high component density possible Precision ball bearing cage guide permits accurate linearity/ parallelism Long service
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationSolenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More information