RBT3E M RBT4E M
|
|
- Jemima Stevenson
- 5 years ago
- Views:
Transcription
1 2 PIECE ROD END BEARING SELF-LUBRICATING RBT-E e.com ROD END MALE LINER 33 Stainless Steel 44C Stainless Steel Teflon / Fabric SELF- LUBRICATING 2 PIECE H F TH L α φo SφDB Limit eiht H7 ±.5 ±.3 ±.5 JIS Class 2 ±.7 (de.) -.13 RBT3E M RBT4E M RBT5E M RBT6E M RBT8E M RBT1E M RBT12E M RBTE M 2. RBT15E RBT16E M RBT18E M RBT2E M RBT22E M RBT25E M RBT28E M RBT3E M Teflon liner permanently bonded to Body I.D. 2. Oscillation load shall be kept within the static load rane, as Teflon liner load endurance is reater than body breakin load. 3. Made to order only. (from RBT15E to RBT3E) 4. No Rotational Breakaway Torque. Standard All Size:.2 ~.34N m Low Torque All Size:.2N m MAX ( Clearance.5mm MAX) Please consult for availability of bearins in this series. Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 +1 Pae 42 Copyriht 26, Minebea Co., Ltd.
2 2 PIECE ROD END BEARING SELF-LUBRICATING RBT e.com ROD END FEMALE LINER 33 Stainless Steel 44C Stainless Steel Teflon / Fabric SELF- LUBRICATING 2 PIECE H F TH L φn φp C S α φo SφDB Limit eiht H7 ±.5 ±.3 ±.5 JIS Class 2 ±.7 ±.5 ±.5 ±.7 ±.25 (de.) -.13 RBT M RBT M RBT M RBT M RBT M RBT M RBT M RBT M 2. RBT RBT M RBT M RBT M RBT M RBT M RBT M RBT M Teflon liner permanently bonded to race I.D. 2. Oscillation load shall be kept within the static load rane, as Teflon liner load endurance is reater than body breakin load. 3. Made to order only. (from RBT15 to RBT3) 4. No Rotational Breakaway Torque. Standard All Size:.2 ~.34N m Low Torque All Size:.2N m MAX ( Clearance.5mm MAX) Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 +1 Copyriht 26, Minebea Co., Ltd. Pae 43
3 3 PIECE ROD END BEARINGS SELF-LUBRICATING HRT-E e.com MALE ROD ENDS HRT-E Chromium-Molybdenum Steel Zinc Plated SELF- LUBRICATING HRT-ECR SUS63 Stainless Steel Passivated 3 PIECE RACE 41 Stainless Steel / Heat Treated 41 Stainless Steel / Heat Treated 44C Stainless Steel / Heat Treated 44C Stainless Steel / Heat Treated LINER Teflon / Fabric Teflon / Fabric φb H7 φd H ±.5 ± F ±.5 TH JIS Class 2 L ±.7 α φo (de.) SφDB No Rotational Breakaway Torque N m Limit (3) Standard Axial (2) (3) HRT3E M HRT4E M ~ HRT5E 5 M5.8 {.6 ~ 6.9kf cm} HRT6E M HRT8E M HRT1E M HRT12E M HRTE M ~ 1.13 HRT15E {1.2 ~ 11.5kf cm} HRT16E M HRT17E M HRT18E M HRT2E M HRT22E M HRT25E M ~ HRT28E M {2.3 ~ 18.4kf cm} HRT3E M Teflon liner permanently bonded to race I.D. (2) Axial load indicates either the smaller value of static load or proof load. (3) Special specification can bare hiher fatiue load. 4. Made to order only. 5. No Rotational Breakaway Torque. Low Torque All Size:.2N m MAX ( Clearance.5mm MAX) Please consult for availability of bearins in this series. Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 Fatiue (3) eiht +1 Pae 44 Copyriht 26, Minebea Co., Ltd.
4 3 PIECE ROD END BEARINGS SELF-LUBRICATING HRT e.com ROD END FEMALE HRT Chromium-Molybdenum Steel Zinc Plated SELF- LUBRICATING HRT-CR SUS63 Stainless Steel Passivated 3 PIECE RACE 41 Stainless Steel / Heat Treated 41 Stainless Steel / Heat Treated 44C Stainless Steel / Heat Treated 44C Stainless Steel / Heat Treated LINER Teflon / Fabric Teflon / Fabric H7 ± H φn φp C F TH L S α φo SφDB ± ± ± +.2 ±.5 JIS Class 2 ±.7 ±.25 (de.) No Rotational Breakaway Torque N m Standard Limit (3) Axial (2) (3) HRT M HRT M ~ HRT M5.8 {.6 ~ 6.9kf cm} HRT M6 1. HRT M HRT M HRT12 M HRT ~ M 2. {1.2 ~ 11.5kf HRT cm} HRT M HRT M HRT M HRT M HRT M ~ 1.8 HRT M {2.3 ~ 18.4kf HRT M cm} HRT M Teflon liner permanently bonded to race I.D. (2) Axial load indicates either the smaller value of static load or proof load. (3) Select Type "CR" for hiher load capability. 4. Made to order only. 5. No Rotational Breakaway Torque. Low Torque All Size:.2N m MAX ( Clearance.5mm MAX) Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 Fatiue (3) eiht +1 Copyriht 26, Minebea Co., Ltd. Pae 45
5 3 PIECE ROD END BEARINGS METAL TO METAL HR-E MALE ROD ENDS METAL TO METAL 3 PIECE HR-E Chromium-Molybdenum Steel Zinc Plated HR-ECR SUS63 Stainless Steel Passivated RACE 41 Stainless Steel / Heat Treated 41 Stainless Steel / Heat Treated Bearin Steel / Chrome Plated Bearin Steel / Heat Treated e.com φb H7 φd ± H ±.13 F ±.5 TH JIS Class 2 L ±.7 α (de.) φo SφDB Limit Axial (1) HR3E M HR4E M HR5E 5 M HR6E M HR8E M HR1E M HR12E M HRE M HR15E HR16E M HR17E M HR18E M HR2E M HR22E M HR25E M HR28E M HR3E M (1) Axial load indicates either the smaller value of static load or proof load. (2) Special specification can bare hiher fatiue load. 3. Made to order only. 4. clearance All Size:.51mm MAX Please consult for availability of bearins in this series. Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 Fatiue (2) eiht +1 Pae 46 Copyriht 26, Minebea Co., Ltd.
6 3 PIECE ROD END BEARING METAL TO METAL HR ROD END FEMALE METAL TO METAL HR Chromium-Molybdenum Steel Zinc Plated 3 PIECE HR-CR SUS63 Stainless Steel Passivated RACE Stainless Steel / Heat Treated Stainless Steel / Heat Treated Bearin Steel / Chrome Plated Stainless Steel / Heat Treated e.com φb H7 φd H F ±.5 ±.13 ± TH JIS Class 2 C L φn φp S α φo +.2 ±.7 ±.5 ±.5 ±.25(de.) -.1 SφDB Limit Axial (1) Fatiue (2) HR M HR M HR M HR M HR M HR M HR M HR M 2. HR HR M HR M HR M HR M HR M HR M HR M HR M (1) Axial load indicates either the smaller value of static load or proof load. (2) Special specification can bare hiher fatiue load. 3. Made to order only. 4. Clearance All Size:.51mm MAX Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 eiht +1 Copyriht 26, Minebea Co., Ltd. Pae 47
7 4 PIECE ROD END BEARING METAL TO METAL PR-E e.com ROD END MALE INSERT METAL TO METAL Low Carbon Steel / Zinc Plated Copper Alloy Bearin Steel / Chrome Plated 4 PIECE H F TH L α φo SφDB Limit eiht H7 ±.5 ±.13 ±.5 JIS Class 2 ±.7 (de.) -.13 PR3E(1) M PR4E(1) M PR5E M PR6E M PR8E M PR1E M PR12E M PRE M PR16E M PR18E M PR2E M PR22E M (1) Lubrication fittin are not available for PR3E, PR4E. 2. Clearance Standard Clearance:.51mm MAX Low Clearance:.3mm MAX Please consult for availability of bearins in this series. Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 +1 Pae 48 Copyriht 26, Minebea Co., Ltd.
8 4 PIECE ROD END BEARING METAL TO METAL PR ROD END FEMALE INSERT METAL TO METAL Low Carbon Steel / Zinc Plated Copper Alloy Bearin Steel / Chrome Plated 4 PIECE e.com C H F TH L φn φp S α φo SφDB +.2 Limit eiht H7 ±.5 ±.13 ±.5 JIS Class 2 ±.7 ±.5 ±.5 ±.25 (de.) PR3(1) M PR4(1) M PR M PR M PR M PR M PR M PR M PR M PR M PR M PR M (1) Lubrication fittin are not available for PR3, PR4. 2. Clearance Standard Clearance:.51mm MAX Low Clearance:.3mm MAX Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 +1 Copyriht 26, Minebea Co., Ltd. Pae 49
9 MOLDED ROD END BEARING SELF-LUBRICATING RBM-E ROD END BEARING MOLDED MINELON TN LINER Low Carbon Steel / Zinc Plated Bearin Steel / Heat Treated / Chrome Plated Minelon TN e.com φb H7 φd ± H ±.13 F ±.5 TH JIS Class 2 L ±.7 α (de.) φo SφDB No Rotational Breakaway Torque N m Clearance mm Limit Dynamic RBM5E M MAX MAX RBM6E M {.4kf cmmax} RBM8E M MAX RBM1E M {.6kf cmmax} MAX RBM12E M {1.2kf cmmax} RBME M MAX MAX RBM16E M {3.5kf cmmax} RBM18E M RBM2E M MAX RBM22E M {5.8kf cmmax} eiht 1 Operatin temperature rane: - 5 ~+ 1 2 Dynamic Ratins: Cd 1. Reversin & Alternatin Dynamic Ratins shall be reduced by half from the values iven in the table under the use of reversin and alternatin load condition. 2. Factor of Operatin Temperature and Slidin Speed Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature and Slidin-Speed condition. Cdt v=ft fv Cd Cdt v: Dynamic Ratins under the use of Hih- Temperature and Slidin speed. ft: Coefficient of Temperature fv: Coefficient of Slidin speed Table 1 Temp. ~4 ~6 ~8 ~1 ft Ratins: Cs 1. Dynamic Ratins shall be reduced to one-thirds of the values iven in the table under the use of that Hih- will be applied continiously or periodically and be reduced to one-sixth of the values iven under Reversin and Alternatin and Impact conditions. 2. Factor of Operatin Temperature Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature conditions. Cs t=ft Cs Cs t: Dynamic Ratins under the use of Hih- Temperature condition. ft: Coefficient of Temperature Cs: iven in the table Table 3 Temp. ~ 3 ~ 4 ~ 6 ~ 8 ~ 9 ~ 1 ft Table 2 Please consult for availability of bearins in this series. Slidin Speed m/min ~.3 ~.4 ~.5 ~.6 ~.7 ~.8 ~.9 ~1.1 ~1.5 ~2.5 fv Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 +1 Pae 5 Copyriht 26, Minebea Co., Ltd.
10 MOLDED ROD END BEARING SELF-LUBRICATING RBM ROD END BEARING FEMALE LINER MOLDED Low Carbon Steel / Zinc Plated Bearin Steel / Heat Treated / Chrome Plated Minelon MINELON TN e.com H F H7 ±.5 ±.13 ± TH L φn JIS Class 2 ±.7 ±.5 φp ±.5 C S α φo SφDB +.2 ±.25 (de.) -.7 No Rotational Breakaway Torque N m Clearance mm Limit RBM M MAX MAX RBM M {.4kf cmmax} RBM M MAX RBM M {.6kf cmmax} MAX RBM M {1.2kf cmmax} RBM M MAX MAX RBM M {3.5kf cmmax} RBM M RBM M MAX RBM M {5.8kf cmmax} Dynamic eiht 1 Operatin temperature rane: - 5 ~+ 1 2 Dynamic Ratins: Cd 1. Reversin & Alternatin Dynamic Ratins shall be reduced by half from the values iven in the table under the use of reversin and alternatin load condition. 2. Factor of Operatin Temperature and Slidin Speed Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature and Slidin-Speed condition. Cdt v=ft fv Cd Cdt v: Dynamic Ratins under the use of Hih- Temperature and Slidin speed. ft: Coefficient of Temperature fv: Coefficient of Slidin speed Table 1 Temp. ~ 4 ~ 6 ~ 8 ~ 1 ft Table 2 Slidin Speed m/min ~.3 ~.4 ~.5 ~.6 ~.7 ~.8 ~.9 ~ 1.1 ~ 1.5 ~ 2.5 fv Ratins: Cs 1. Dynamic Ratins shall be reduced to one-thirds of the values iven in the table under the use of that Hih- will be applied continiously or periodically and be reduced to one-sixth of the values iven under Reversin and Alternatin and Impact conditions. 2. Factor of Operatin Temperature Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature conditions. Cs t=ft Cs Cs t: Dynamic Ratins under the use of Hih- Temperature condition. ft: Coefficient of Temperature Cs: iven in the table Table 3 Temp. ~3 ~4 ~6 ~8 ~9 ~1 ft Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 +1 Copyriht 26, Minebea Co., Ltd. Pae 51
11 ROD END BEARING LUBRICATED PBR-EFN ROD END MALE INSERT LO TORQUE e.com INNER RACE Chrome Molydbenum Steel / Zinc Plated Bearin Steel / Chrome Plated Bearin Steel φb H7 φd ± H ±.13 F ±.5 TH JIS Class 2 L ±.7 α (de.) Basic Limit Basic Dynamic Limit PBR5EFN M PBR6EFN M PBR8EFN M PBR1EFN M PBR12EFN M PBREFN M PBR16EFN M PBR18EFN M PBR2EFN M PBR22EFN M PBR25EFN M PBR3EFN M eiht 1. Made to order only. 2. Lubrication: MIL-PRF-23827(yellow)rease 3. Clearance All Size:.1mm MAX Please consult for availability of bearins in this series. Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 +1 Pae 54 Copyriht 26, Minebea Co., Ltd.
12 ROD END BEARING LUBRICATED PBR-FN ROD END FEMALE INSERT LO TORQUE INNER RACE Chrome Molydbenum Steel / Zinc Plated Bearin Steel / Chrome Plated Bearin Steel e.com C Basic H F TH L φn φp S Basic α Dynamic +.2 Limit eiht H7 ±.5 ±.13 ±.5 JIS Class 2 ±.7 ±.5 ±.5 ±.25 (de.) Limit PBR5FN M PBR6FN M PBR8FN M PBR1FN M PBR12FN M PBRFN M PBR16FN M PBR18FN M PBR2FN M PBR22FN M PBR25FN M PBR3FN M Made to order only. 2. Lubrication: MIL-PRF-23827(yellow)rease 3. Clearance All Size:.1mm MAX Please consult for availability of bearins in this series. Bore size ~3 ~6 ~1 ~18 ~3 +1 Copyriht 26, Minebea Co., Ltd. Pae 55
SBT SPHERICAL SELF-LUBRICATING WIDE Materials
PHERICAL BEARING ELF-LUBRICATING BT PHERICAL ELF-LUBRICATING WIDE RACE BALL LINER 41 tainless teel / Heat Treated 44C tainless teel / Heat Treated Teflon / Fabric MINEBEA No Rotational H α φo tatic Limit
More informationM24X
Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:
More informationFEROGLIDE. Self lubricating bearings TECHNICAL MANUAL
FEROGLIDE Self lubricating bearings TECHNICAL MANUAL www.tenmat.com Page 1 Issue 2 Contents Topic Page Operating Parameters 3 Bearing Load Limits 3 Bearing Wear 4 Velocity Limit 4 Pressure Velocity (PV)
More information...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationSeries BHT. Specifications. B HT 6 pole + PE. B HT 10 pole + PE. B HT 16 pole + PE. B HT 24 pole + PE. Page
Inserts series B HT are made of special hih temperature resistant plastic material, suitable for temperatures up to max. 200 0 C includin natural heatin. Housins of series B HT are made of sea-water resistant
More informationAEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More information[Basic Construction and Calculation Formula of Hydraulic Cylinder]
[Basic Construction and Calculation Formula of Hydraulic Cylinder] [Construction and Mechanism] 1. The pressurized hydraulic fluid through the bottom port extends the cylinder rod, and the fluid on the
More informationBEARING Polyester Fabric, Rod and Piston and Coil
ØD ØD 3 Ød 1 Ød Ød 3 ØD 1 506 BEARIN Polyester Fabric, Rod and Piston and Coil DEIN The Hallite 506 bearing strip is designed to provide an extremely effective, hard wearing, and easy-to-use bearing solution
More informationRoaDyn S635. Force. Wheel force transducer for heavy cars and high performance vehicles. Type 9267A1
Force RoaDyn S635 Wheel force transducer for heavy cars and hih performance vehicles For measurin three forces and three moments on a rotatin wheel; a major constituent in modern vehicle development. Modular
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationHigh Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector
Non-rotating Type High Precision Scale Cylinder Series CEP1 ø12, ø How to Order CEP1 12 0 F9N L F High precision scale cylinder Mounting bracket Direct mounting front tapped type Foot type Front flange
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationTechnical Data Index
Technical Data Index Description Page Product Information 2-3 Specifications 4 Temperature Limits 4 Lubrication Grease 5 Dry Film 6 PTFE Liner 7 Bearing Misalignment 8 Suggested Housing Bores 9-11 Suggested
More informationSpherical and rod-end bearings
Spherical and rod-end bearings Swiss ISO 9001 2000 AECMA-EASE EN 9100 www.schaublin.com www.rbcfrance.com Ed. Jan.2006 Copyright 2006 Schaublin-SA All rights reserved Table of contents Page 4 Page Table
More informationLinear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
More informationPlastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
More informationEXPANSION JOINT SELECTION GUIDE
EXPANSION JOINT SELECTION GUIDE The proper selection and application of an expansion joint is the determining factor in its operation and life. Improper selection and application will lead to problems
More informationCopper Axial Expansion Joint
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 4 Copper Axial Expansion Joint FlexEJ Small
More informationSpherical Plain Bearings Series K
Type S Heavy Duty Re-greasable High Strength Bronze Insert Used for High Revs Type S..SS Stainless Steel Re-greasable High Strength Bronze Insert Stainless Steel Used for High Revs in Corrosive Environments
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationWrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
More informationBasic Static Load Rating of Rolling Contact Bearings
Basic Static Load Rating of Rolling Contact Bearings The load carried by a non-rotating bearing is called a static load. The basic static load rating is defined as the static radial load (in case of radial
More informationSeries CRB2. Rotary Actuator Vane Style. Size: 10, 15, 20, 30, 40 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D- 20- Series Variations.
Rotary Actuator Vane Style Series :,,,, 4 1 Series Variations Standard Vane type Port location Rotating angle Shaft type Fluid (S) ouble vane () Side ported (Nil) Axial ported (E) 9 18 27 ouble shaft W
More informationLPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
More informationHARRISON SILVERDALE LTD
FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationFBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
More information6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125
Symbol Features Ideal for clamping, press-in and under short stroke condition. Can be installed even in a narrow space with a shorter length in axial thrust direction. Easy installation only with bolts.
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationLinear Bushing LBE LBD LBB LM LME LMB
Linear Busin LBLBLBBLMLMLMB Linear Busin is a i precision linear motion rollin uide wic travels alon a saft to acieve endless linear motion. In te external cylinder, a retainer, steel balls, etc. are compactly
More information5 Bearing Load. 5.2 Distribution of Bearing Load. 5.3 Dynamic Equivalent Load Calculation of dynamic equivalent load
5 Bearing Load 5.2 Distribution of Bearing Load Table 5.4 Radial load factor (X) and axial load factor (Y) In order to determine the radial load distribution to each bearing attached to a shaft, use the
More informationThin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
More informationPOSI-LOCK. Connects the Shaft and Hub with the Wedging Action of the Tapered Surface. Mechanical Shaft Lock ETP BUSHINGS
Mechanical Shaft ock POSI-OCK Mechanical Shaft ock POSI-OCK Application Machine tool, pump, molding machine, printing machine, palletizing robot, various jigs and tools Connects the Shaft and Hub with
More informationMaximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM
8 Bearing selection Factors We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such
More informationROD ENDS AND SPHERICAL BEARINGS
144 ROD ENDS AND SPHERICAL BEARINGS SEALMASTER Bearings entered the rod end and spherical plain bearing market in 1956 providing customers a broad product line offering for over 40 years. The product was
More informationEngineered for Performance
Enineered for Performance Intensive development efforts have produced this hih performance rane of cleats that provide unbeatable holdin power while allowin easy cleatin and releasin of control lines in
More informationDAIDYNE DDK05 DAIDYNE DDK05. Major Superior Points to Roller Bearing. Superior Points to Roller Bearing. Physical Characteristics
Major Superior Points to Roller Bearing bearing is free from the skew problem. bearing can also be used for sliding motion in the axial direction. bearing allows very compact equipment design that does
More informationHOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.
HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More information1.7 Backlash. Summary of the backlash is play or clearance between one pair of gear. Fig. 17 Backlash
1.7 Backlash Summary of the backlash is play or clearance between one pair of gear. Fig. 17 Backlash Great care is taken to produce the gear with zero deviation. However we are unable to completely eliminate
More informationSTANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner
More informationBearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More informationSECTION Decora Plus Switches & Receptacles
SECTION Decora Plus Switches & Receptacles 15 & 20A 120/277V AC Commercial rade, Back & Side ired DIEECTRIC OVEROAD TEMP. VOTAE U 20 TEST RISE ithstands 100 cycles of overload 30 C max 1500V at 4.8 times
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, contions Steel types, mechanical properties and contions of EO steel tubes Steel type Tensile strength
More informationELGOGLIDE maintenance-free spherical plain bearings and plain bushes
Not everything that is presented on paper as giving very high performance actually fulfils the expectations raised in practice. Nothing is more annoying than promises that cannot then be kept in technical
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationLong-Life Self-Lubricating Spherical Bearings
Long-Life Self-Lubricating Spherical Bearings ASTRO Division Introduction Long-Life Self-Lubricating Spherical Bearings Featuring NHBB s MK Liner System Introducing the industry s first self-lubricating
More informationDescription of Each Series & Table of Dimensions
The eedle Roller Bearin Series has been produced at a quality level in conformance with ISO- and ISO- usin a production system that reduces neative impact on the lobal environment. This catalo adopts the
More informationBall Screw Support Units. Outline. Compact Support Units. Variation
all Screw s Outline Variation Compact smsu seriesprovide 2 choices of ousin type, which are illow type and Flane type. Fixed side and supported side Units are standardized for each type. In case of illow
More informationProduct program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units
Product program 1 2 3 4 5 6 7 8 Rod ends and spherical bearings Bearings and steel balls ASK Bearing units ASAHI Bearing units Metric cam follower bearings Slide bushes Shaft-hub-connections Clevises and
More informationSECTION 1. Basic Information
SECTION 1 SECTION 1 This section covers both the basic technical information governing bearing selection and the part numbering system used in this catalog. When the part numbering is different from the
More informationFLANGED TYPE LINEAR BEARINGS
FLANED TYPE LINEAR BEARINS Inch and Metric Recirculating Ball SQUARE FLANE (SF) ROUND RANE (RF) Requires no housing, thus reducing costs Requires little installation space Ensures high accuracy upon replacement
More informationDunlop BTL Ltd. Contact us. Manufacturing Facilities +44 (0) (0)
Joints Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44 (0)1233 664440 sales@dunlopbtl.com
More informationN Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
More informationElliptical design for space-savings
Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design
More informationCrossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way
Crossed Roller Ways Description of each series and Table of dimensions Crossed Roller Way Page - to -7 Anti-Creep Cage Crossed Roller Way Page - to - Crossed Roller Way Unit Page - to - In the table of
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationRHN Series Electric Wire Rope Hoists
RHN Series Electric Wire Rope Hoists easy Maintenance control panel IP protection with modern controls. Components mounted on DIN rail. Equipped with main line contactor. adjustable Geared Limit switch
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063W ±100ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0402 Case 402Ω ±1% 0.063 ±100ppm/ C RS Stock No: 716-8721 Product Details RS Pro 0402 thick film surface mount resistor with ±1% tolerance, provides
More informationSine Rodless Cylinder Series RE asic Type/ø, ø, ø, ø, ø3 asic type Sine rodless cylinder (basic type) Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and
More informationSpeed Reducers for Precision Motion Control Reducer Catalog
Speed Reducers for Precision Motion Control Reducer Catalog CSF-mini Excellent Technology for Evolving Industries Harmonic Drive actuators utilize high-precision, zero-backlash Harmonic Drive precision
More informationThin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
More informationLP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51
Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58
More informationHVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
More informationFlexiCase Rotary Seals Introduction
FlexiCase Rotary Seals Introduction Contents Engineering................. -3 Materials................... -6 Product Offering............. -7 What Is a FlexiCase and How Does It Work? FlexiCase FlexiSeal
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
More informationTECHNICAL INFORMATION
Ball Bearing Cages, Retainers, and Ball Separators The ball bearing cage (also known as a bearing retainer or ball separator used interchangeably), is the component in a ball bearing, that separates the
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationTNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
More informationRADIAL NEEDLE ROLLER AND CAGE ASSEMBLIES
RADIAL NEEDLE ROLLER AND CAGE AEMBLIE Technical features Radial needle roller and cage assemblies have a steel cage that provides both inward and outward retention for the needle rollers. The designs provide
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationCharacteristics of strands to Australian and European Standards
STEMA DE POSTESADO Post-Tensioning System Technical Data Characteristics of strands to Australian and European Standards Standard diameter Minimun tensile strengh [MPa] crosssection [mm 2 ] Mass per metre
More informationRADIAL NEEDLE ROLLER AND CAGE ASSEMBLIES
RADIAL NEEDLE ROLLER AND CAGE AEMBLIE Technical features Radial needle roller and cage assemblies have a steel cage that provides both inward and outward retention for the needle rollers. The designs provide
More informationCumulative lead PR1 PR2 PR3 PR4. Table 7.2 Maximum axial play of precision rolled ballscrew Unit: mm
90 S99TE11-0407 7. Rolled screws 7.1 Introduction HIWIN Rolled screws are made by the rolling process of the screw spindle instead of the grinding process. Rolled ballscrews not only have the benefit of
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationRolled Ball Screws RBS series (Normal, Medium, Large, Extra large Lead)
Rolled Ball Screws RBS series (Normal, Medium, Large, Extra large Lead) Series Normal and Medium Lead (φ8~φ40) RBSMA Series Large Lead l=d (φ10~φ40) RBSDA Series Extra large Lead l=2d (φ16~φ32) The method
More informationToll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationDC2-Wire Spatter-Guarded Cylindrical Proximity Switches
DC-Wire Spatter-Guarded Cylindrical Proximity Switches FL7M Series A variety of anti-spatter measures make these switches the optimum for welding processes on the automotive production line. With Teflon
More informationBallscrews. Table of contents
Ballscrews Table of contents 1. Accuracy rade of HIWIN Ballscrews... 1 1-1. International Standard of Accuracy rade for Ballscrews... 1 1-2. Accuracy rade of Precision Ballscrews... 1 1-3. Standard Combination
More informationKVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationcontents Symbols and units in the catalog Engineering data
contents Symbols and units in the catalog Engineering data - 4 Deep groove ball bearings Series.. Series.. Series.. Series.. Series 3.. - Double-row angular contact ball bearings Series 3.. Series 33..
More informationCompact Cylinder/Plate type
Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series
More informationLinear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationHigh visibility laser etched markings provide quick size identification. A secondary hard stamp marking provides permanent identification.
IMPACT SOCKET GUIDE INCLUDES: 1/4",, and 3/4" Drive Open Stock Sockets, Sockets, Bit Sockets, Sets, Extensions & Adapters STRENGTH SPEED TECHNOLOGY Sockets and extensions are made from impact grade Chrome
More informationAmerica rolls on Kendale quality made in the U.S.A.
America rolls on Kendale quality made in the U.S.A. Kendale Industries, Inc. Auburn, Alabama Kendale Industries is a leading producer of semi-precision ball bearings and wheels for powered and gravity-type
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More information