Engineered for Performance
|
|
- Doreen Carpenter
- 5 years ago
- Views:
Transcription
1 Enineered for Performance Intensive development efforts have produced this hih performance rane of cleats that provide unbeatable holdin power while allowin easy cleatin and releasin of control lines in every application and load condition. Throuh the use of advanced composites, these cleats achieve superior performance while overcomin the limitations of metal alloys. Ronstan cam cleats are stron, liht and corrosion free. Desin Optimisation Computer optimised Cam profile results in superior rippin ability over a wide rane of rope sizes. Slotted Bearins Self lubricatin, selfcleanin slotted bearins provide lower frictional resistance and quicker response times than ball bearins which deform under load, as well as superior resistance to sand and salt. MultiCoil Sprin The multicoil sprin recessed in the upper part of the cam enerates near constant torque. This constant torque ensures secure cleatin of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. Carbon Cams Lihtweiht ultra riid carbon fibre composite cams are corrosion free, suffer virtually no tooth wear and are nonrope abrasive. Unique Teeth and Entry Profiles Low entry and exit efforts due to unique teeth and entry profiles. Reversible cams. Advanced Composite Base Base produced from lon fibre reinforced polymer, a result of advanced composite technoloy providin metal replacement. Customisation A comprehensive rane of specialist cleat accessories allow customisation of the cleat setup to optimise performance by controllin inward lead, outward lead, cleatin and uncleatin anle and heiht. Total Control Swivel bases further enhance the function of cleats providin articulation, and with some models, settin of cleatin anle and direction (up or down cleatin) to allow control of lines and sheets from various positions on the boat. 76
2 CCleats & TCleats Team Ronstan Lindsay Irwin / Andrew Perry, International 14 Skiff Photo: Andrea Francolini / RF5000 RF5400 RF5400B RF5400G RF5400Y RF5400R RF5010 RF5410 RF5410B RF5410G RF5410Y RF5410R RF5020 RF5420 RF5420B RF5420G RF5420Y RF5420R RF5011 RF5001 Desin, materials selection and advanced manufacturin methods combine to deliver superior strenth and holdin power, liht weiht and corrosion resistance. Cam profile and multicoil sprin minimise line entry and release effort. Carbon fibre composite cams (CCleats ). Glass fibre composite cams (TCleats ). Carbon fibre composite cam material provides maximum resistance to heat and abrasion. Lon strand lass fibre reinforced polymer base. PTFE imprenated Acetal slotted bear Unique selfcleanin, selflubricatin slotted bearins ensure consistent hih performance even when subjected to hih static loads. TYPE & SIZE CCleats SMALL (RF5000 & RF ) MEDIUM (RF5010 & RF ) LARGE (RF5020 & RF ) TCleats SMALL (RF5001) MEDIUM (RF5011) ROPE HOLE FASTENER CAPACITY SPACING SIZE DIMENSIONS Stainless steel multicoil spr B.L. ROPE HOLE FASTENER CAPACITY SPACING SIZE DIMENSIONS B.L M4 M5 M6 48L x 24W x 20H 66L x 31W x 26H 88L x 41W x 35H /325/16 1/81/2 1/45/8 1 1/16 1 1/2 2 5/32 1/4 1 7/8L x 1W x 3/4H 2 5/8L x 1 1/4W x 1H 3 1/2L x 1 5/8W x 1 3/8H M4 M5 48L x 24W x 20H 66L x 31W x 26H /325/16 1/81/2 1 1/16 1 1/2 5/32 1 7/8L x 1W x 3/4H 2 5/8L x 1 1/4W x 1H
3 Camcleat Accessories SMALL TCleat & CCleat MEDIUM TCleat & CCleat LARGE CCleat Saddle stainless steel RF (0.1) RF (0.3) RF (0.5) Saddle, stainless steel liner RF5013A 8 (0.3) RF5413A 8 (0.3) Front mounted fairlead RF (0.2) RF (0.2) RF (0.5) RF (0.5) Heavy duty front mounted fairlead RF5017 * 20 (0.7) RF5417 * 20 (0.7) Rope uide RF (0.2) RF (0.4) Wede Kit RF (0.2) RF (0.4) Riser/curved surface adapter RF (1.1) * The RF5017 heavy duty fairlead can only be used with medium CCleats and TCleats manufactured from mid2005 indicated by two protrudin vertical lines on the cleat base, located between the entry points for the fairlead stainless steel base wire element. 78
4 Swivel Cleat Bases RF58 RF67 RF60 RF59 RF x 5 ( ) 3 x 5 ( ) 2 x 5 ( ) 4 x 5 ( ) RF1455 RF5 RF4 RF x 5 ( ) 2 x 4 (5/32 ) 4 x 5 ( ) 2 x 5 ( ) RF20175 Lead and cleatin options Lead from below Lead from above RF5 Lead and cleatin options Up or down uncleatin 8:1 Cunninham Uncleat up Uncleat down Uncleat down Uncleat up Swivel cleat bases permit easy cleatin and releasin from any anle. Sheet leads and halyards on dinhies and catamarans. The RF60 features adjustable stops to limit rotation, which can be removed to allow full 360 rotation. Cunninham, van, foreuy, pole toppin lift and other control lines on larer yachts. Cleatin plates are heavy aue alloy for stiffness and minimum distortion under load. Alloy cleatin arms. Deadeyes have flared stainless steel liners for minimum rope wear and lon service life. Grade 316 stainless steel fixtures. Fibre reinforced Nylon body (RF5). The RF5 is manufactured in lihtweiht fibre reinforced composite materials position of sheave can be chaned to feed control line from below. SUITS ROPE SUITS ROPE /32 5/ Swivellin deadeye, cleat unit. Aluminium arm, 360 rotation, medium TCleat & fairlead.*2 Deadeye with stainless steel liner. 14 (9/16 ) hole clearance. Swivellin deadeye, cleat unit. Aluminium arm, adjustable rotation stops, medium CCleat & fairlead.*2 Swivellin deadeye, cleat unit. Aluminium arm, 360 rotation, small TCleat & fairlead.* Up to /8 1/2 Up to 9/16 1/8 1/2 3/32 5/ RF1455 Swivel base with block post socket. 4.8 ( ) diam. p Suits Series 40 & 50 BB & AP blocks. 200 (440); B.L. 1000, (2200) RF2358 Deadeye with stainless steel liner. 16 (5/8 ) hole clearance. Up to Up to 5/8 0.9 RF20175 Swivellin cleat platform. 20 (3/4 ) sheave with stainless steel ball bearins, small TCleat & fairlead. 150 (330); B.L. 300, (660)* /32 1/4 2.8 PRODUCT No. DESCRIPTION RF4 Swivel shackle base. Suits Series 40 & 55 Orbit Block Dyneema links. 4.8 ( ) diam. p 250 (550), B.L. 500 (1100) RF5 Swivellin cleat platform. 28 (1 1/8 ) diam. ball bearin sheave, small TCleat and fairlead. 150 (330); B.L. 300, (660).*1 RF58 RF59 RF60 RF67 *1 Load ratins are for the cleat base assembly and are based upon a 90 chane in line direction. Line load should be limited to: 125 (275), B.L. 250 (550). *2 Line load should be limited to: 175 (385), B.L. 350 (770). *3 Line load should be limited to: 125 (275), B.L. 250 (550). 79
5 Swivel Cleat Bases Conventional head post block discard plastic roller RF7 RF8 Orbit Block use supplied plastic roller when attachin Dyneema link. 4 x 5 ( ) 4 x 5 ( ) RF7 Features RF7KIT Sprin not included Heiht adjustable arm for optimum cleatin anle. Twin ball bearin race minimises friction. Adjustable ratchet system prevents the arm from fallin to leeward. Adjustable heiht and anle of RF7 cleatin arm for optimum control. Twin rows of ball bearins support the RF7 cleatin arm. Stops are provided to limit travel to 260, and can be removed to allow full 360 rotation. An adjustable ratchet in the RF7 base allows the cleatin arm to remain in its most recently used position. The ratchet can be turned off for free swivell Cleat and wede kit can be mounted upside down to help achieve the optimum cleatin anle or suit downward uncleatin if preferred. The swivel arm of the RF8 is fabricated from 8 (5/16 ) alloy plate for heavy duty applications. RF7 suits traditional post/shackle head blocks and Dyneema Link head Orbit Blocks Mainsheet systems on dinhies and sportsboats to 8m (26ft). Fork fittins have a 5 pin to permit direct attachment to the head post of a block (i.e. not usin the shackle). Alloy cleatin arms. Cleat mountin can be reversed on both RF7 and RF8, to fit under the cleatin arm for downward release action. Grade 316 stainless steel fittins. Fibre reinforced Nylon base (RF7). PRODUCT No. DESCRIPTION RF7 RF7KIT RF8 Ball bearin swivellin cleat base, medium CCleat, 5 ( ) pin* Adapter kit to convert pre2008 model RF7 products to suit Orbit Block Dyneema link attachment Swivellin cleat base, medium CCleat, 5 ( ) pin* B.L. B.L *Load ratins are for the cleat base assembly, and are based on a 120 chane in line direction. Line load ratins should be limited to: 175 (385), B.L. 350 (770). 80
6 VCleats 470 Fleet Photo: Victor Kovalenko pnp171 RF x 4 (5/32 ) RF5105 RF5122 RF x 5 ( ) 2 x 6 (7/32 ) RF614 RF5121 RF5121 RF x 4 (5/32 ) RF x 5 ( ) Lihtweiht and corrosion proof. Greater abrasion resistance than traditional plastic cleats. Low, snafree profile. Base profile suits mountin on flat and curved surfaces. Cutaway in base of fairlead cleats can be used as a becket for a 2:1 purchase system (refer diaram above.) PRODUCT No. DESCRIPTION RF5100 RF5101 RF5105 RF5106 RF5110 RF5121 VCleat, small, open VCleat, small, fairlead VCleat, medium, open VCleat, medium, fairlead VCleat, lare, open Trapeze cleat, Aluminium RF5101, RF5106 Becket takeoff for simple 2:1 purchase system RF1317 RF5121 trapeze Clamcleat is made from Hardcoat anodised alloy for maximum wear resistance and incorporates a roller for easy 2:1 adjustment under load (refer diaram above.) RF17 Control lines on dinhies and catamarans. PTFE imprenated, lass and carbon fibre composite cleats. 2:1 ADJUSTABLE TRAPEZE SYSTEM Hardcoat anodised alloy RF5121. FASTENER SIZE HOLE SPACING ROPE SIZE FASTENER SIZE HOLE SPACING ROPE SIZE 1/4 1 7/16 1 7/8 2 5/32 2 9/ /81/4 1/81/4 5/16 5/16 5/161/2 5/325/
CLEATS & ROPE CLUTCHES V-Cleats 67
CLEATS & ROPE CLUTCHES V-Cleats 67 RF5121 RF5100 RF5105 RF5110 2 x 4mm (5/32 ) 2 x 5mm (3/16 ) 2 x 6mm (1/4 ) RF5101 RF5106 PNP171 RF5122 RF5121 RF614 2 x 4mm (5/32 ) 2 x 5mm (3/16 ) RF5101, RF5106 Becket
More information30MM DYNAMIC BLOCKS TECHNICAL 20MM DYNAMIC BLOCKS TECHNICAL USAGE USAGE. 3
20MM DYNAMIC TECHNICAL 30MM DYNAMIC TECHNICAL PRO-STRAP Cold forged strap, gives rope friendly attachment & greater articulation STAINLESS CHEEKS Optimised rope guides with larger windows to reduce weight
More informationCargo Front Loader Order Guide Summary
Caro Front Loader Order Guide Summary Fendt Caro The Fendt Caro is the only front loader specifically desined for the Fendt rane. Enineered and manufactured by the same experienced hands that produce the
More informationWrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
More informationCargo Front Loader Order Guide Summary
Caro Front Loader Order Guide Summary Fendt Caro The Fendt Caro is the only front loader specifically desined for the Fendt rane. Enineered and manufactured by the same experienced hands that produce the
More informationA316 s.steel series CLASSIC LINE
A316 s.steel series CLASSIC LINE This stainless steel series, with a traditional design, is conceived especially for classic boats. The line includes 6 different sizes with diameters from 65 to 180 mm
More informationShort Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
More informationTensioning equipment. Handling and uncoiling blocks 148. Tensioning equipment 149. Hoist ratchet and Guying equipment 151.
Tensionin equipment Handlin and uncoilin blocks 148 Tensionin equipment 149 Hoist ratchet and Guyin equipment 151 Dynamometers 152 Handlin and uncoilin blocks Uncoilin block Groove bottom Cable Workin
More informationSevere Duty - Three-Phase Motors
GENERAL PURPOSE TEFC Foot Mount...A-83 TEFC C-Face Foot Mount...A-90 TEFC C-Face Footless...A-92 IEEE 841 TEFC Foot Mount...A-94 TEFC C-Face Foot Mount...A-98 TEFC C-Face Footless...A-99 CRUSHER DUTY TEFC
More informationW22 Three Phase Motor
Motors Enery Automation Coatins W22 Three Phase Motor Enery savin Increased productivity Extended lifetime Lower maintenance USA0602 www.we.net W22 Efficiency and reliability for industry Hih performance
More informationFeatures of the Cross Roller Table
Features and Types Features of the Table Stopper bolt Rail Clearance adjustment bolt Rail Base Roller Cae Structure and Features Fi.1 Structure of the The is a compact, hihly riid finite linear uide unit
More informationDescription of Each Series & Table of Dimensions
The eedle Roller Bearin Series has been produced at a quality level in conformance with ISO- and ISO- usin a production system that reduces neative impact on the lobal environment. This catalo adopts the
More informationSolutions for Pulp and Paper
Motors Automation Enery Transmission & Distribution Coatins Solutions for Pulp and Paper www.we.net Solutions for Pulp and Paper WEG can offer complete solutions for the whole process in pulp and paper
More informationLinear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
More informationLinear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
More informationopf blocks OPF SERIES
opf blocks OPF SERIES New by Antal the One Piece Frame block, the block without pins or screws, it is a light and strong solution: simply a hard black anodized and teflon coated aluminium frame in one
More informationBG 4 (A) BG 4 (A) BULLSEYE FAIRLEAD (Small) Base 26m. Screw hole pitch 15mm. Suitable for rope up to 6mm. Manufactured from black or white nylon.
BG 1 (B) BG 1 (A) BG 1 (A) BURGEE (STANDARD) Sturdy 3mm dia tough nylon frame with wind vane and aluminium shaft. Flag 140mm X 100mm light terylene material stitched with polyester thread. Balance of Burgee
More informationWEG General Purpose Motors. TEFC W22 and Rolled Steel Motors
WEG General Purpose Motors TEFC W22 and Rolled Steel Motors USGP.2018 TWO SUPERIOR CHOICES ABLOECK AIL ILY AV READ IN ST Rolled Steel Robust base and eyebolts Superior Coolin System Cast Iron C-Flanes
More informationmanipulators + carts the perfect match
manipulators + carts the perfect match esmo manipulators, carts, and test floor equipment excellent cost/performance ratio for most reliable testin All esmo manipulator products are available with standardized
More informationExperience Link-Belt.
Experience Link-Belt. Link-Belt s 71 612 m 2. (770,822 sq. ft). manufacturin facility in Lexinton, Kentucky We are a financially stron, proressive company with cuttin ede technoloy that desins, manufactures,
More informationMotors Automation Energy Transmission & Distribution Coatings. W22 Brake Motor Three-phase Electric Motor
Motors Automation Enery Transmission & Distribution Coatins W22 Brake Motor Three-phase Electric Motor -- Efficiency and reliability for the industry Founded in 1961, WEG is reconized today as one of the
More informationCRIMPING PLIERS. 52 Crimping Pliers also for two-hand operation. Number of crimping positions. Article No mm AWG
52 Crimpin Pliers also for two-hand operation 52 04 for solder-free electrical connections the inenious lever transmission reduces the handforce up to 30 % compared with reular pliers repetitive, hih quality
More informationBlack Magic AirBlocks
Black Magic AirBlocks 1 SLEEK NEW LOOK, SAME POWERFUL PERFORMANCE The entire line of Black Magic AirBlocks has been redesigned with a sleek new look. Their unique, performance-packed These strong, lightweight
More informationThree-Phase General Purpose Motors
TEFC Foot Mount... A-32 TEFC C-Face Foot Mount.... A-42 TEFC C-Face Footless... A-46 ODP Foot Mount... A-50 ODP C-Face Foot Mount... A-56 ODP C-Face Footless.... A-60 ODP Resilient Base.... A-60 IEEE 841
More informationFlat Nose Pliers DIN ISO
Flat Nose Pliers DIN ISO 5745 20 > flat, short, wide jaws > knurled rippin surfaces > Special tool steel, fored, oil hardened 20 01 160 20 02 160 20 05 160 20 06 160 003773 Pliers Head Handles 20 01 125
More informationSafe Tool holding system by Beta. Height-Safe
afe Tool holdin system by Beta Heiht-afe 2 H-FE CTOGUE H-FE Tool holdin system by Beta For jobs to be carried out hih from the round or in the presence of mechanical movin parts, safety is a key factor
More informationRecord Plus. Moulded Case Circuit Breakers. Record Plus. GE Power Controls P. 1
P. 1 Selective and Current Limitin A complete line P. 2 A complete line up to 1600 A FD125 Circuit Breaker 3 and 4 pole 16-125A FE160 & FE250 Circuit Breaker 3 and 4 pole 25-250A FG400 & FG630 Circuit
More informationMotors Automation Energy Transmission & Distribution Coatings. W22 Brake Motor Three-phase Electric Motor
Motors Automation Enery Transmission & Distribution Coatins W22 Brake Motor Three-phase Electric Motor -- Visual index Main motor parts 1 Sealin system 8 Fan 2 Endshields 9 Bride rectifier 3 Bearins 10
More informationInstructions for use I 0375 GB - 1
Instructions for use I INDEX pae 1 - GENERAL...3 1.1 - GENERAL SAFETY REGULATIONS...3 1.1.1 - STANDARD SAFETY DEVICES...3 1.2 - FIELD OF APPLICATION...3 1.3 - OVERALL DIMENSIONS...3 1.4 - TECHNICAL DATA...4
More informationPULLEY BLOCKS & SAIL HANDLING
PULLEY BLOCKS & SAIL HANDLING SAILING PULLEY BLOCKS & ACCESSORIES Pulley Block (Holt Plain Block 60) PRODUCT CODE: SM-0529 PRICE 18.40 Sailing pulley block, Holt Plain Block 60. Line size up to 14mm. Perfect
More informationGerman Test Point Manufacturer. General Info Technical Info Sealing Types. Materials, media, standards. Test point + union 24 DIN female cone
100 0 80 20 500 40 1000 1400 60 Test Points Fittins Hose Hose for Hydraulics General Info Technical Info Sealin Types Company, terms, ISO 9001:2008 4 4 7 Materials, media, standards Stud ends, ports, sealin
More informationELECTRIC HOISTS AIR HOISTS MANUAL HOISTS LEVER HOISTS TROLLEYS PRODUCT CATALOGUE D E F Y G R A V I T Y
ELETRI HOISTS AIR HOISTS MANUAL HOISTS LEVER HOISTS TROLLEYS PROUT ATALOGUE E F Y G R A V I T Y efy Gravity ABOUT KITO s are used y people. That s why the uidin principle ehind everythin we do is - and
More information2 - HANDLING AND HOISTING COMMISSIONING...5
Instructions for use I CONTENTS pae 1 - GENERAL...3 1.1 - GENERAL SAFETY REGULATIONS...3 1.1.1 - STANDARD SAFETY DEVICES...3 1.2 - FIELD OF USE...3 1.3 - OVERALL DIMENSIONS...3 1.4 - SPECIFICATION...4
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger SS11 Subsea Lever Hoist with overload protection with overload protection with clevis adaptor and shackle Main Features DNV GL Verification tested according to NORSOK R-002 Available with slipping
More informationWG20 Geared Motors. Motors Automation Energy Transmission & Distribution Coatings
WG20 Geared Motors Motors Automation Enery Transmission & Distribution Coatins www.we.net WEG Group - Transformin enery into solutions. WEG is a leadin lobal manufacturer and solutions provider of drive
More informationEngineEye NEXT. Reliable Advanced Diagnostics. Cost Savings
Optimize your enine performance NEXT GENERATION EnineEye Cylinder pressure analyzer The EnineEye improves ship uptime and lowers operatin cost by allowin technicians to balance, fine-tune and monitor main
More informationDrive Systems Geared Motors, Motors and Electronic Drives.
Geared Motors, Motors and Electronic Drives. Hih efficiency (IE2, IE3) Hih dynamic Compact desin Low noise Low backlash www.we.net A suitable drive solution for each application Requirements Modular Drive
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationELATECH. isync T - AT. isync
ELATECH In the spirit of continuos innovation, in order to answer to the increased need of industry in power transmission, ELATECH has developed the rane of belts. belts are made with special polyurethane
More informationPortuguês English Español Motores Elétricos
FINAL OPERATION AND MAINTENANCE MANUAL MINA MINISTRO HALES PROJECT ORDEN DE COMPRA H336073-PM031/A 4501190525 FMC TECHNOLOGIES PROJECT B6042 FMC Technoloies Chile Ltda. Callao #2970 Oficina 704 Edificio
More informationKNIPEX Quality Made in Germany. KNIPEX Tool Cases and Tool Kits
KNIPEX Quality Made in Germany KNIPEX Tool Cases and Tool Kits Tool Case Robust34 Electric 26 parts For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant Filled with 26 branded
More informationCompose your nautical experience.
Compose your nautical experience. CARBON STEERING WHEELS Using the technologies acquired over many years of testing and development carbon gangways, GS Composite started producing of carbon steering wheels
More informationEnclosed and Open Starters
Enclosed and Open Starters Start/Stop contacts independent from main contactor and from thermal overload Allows cable connection from rear side of the enclosure Thermal overload reset interated to the
More informationdefining the future in scoreboards
definin the future in scoreboards Video Display Scoreboards HD Video Display Video Display Scoreboards Advanced technoloy and commitment to detail drives Eversan to produce the most innovative scoreboards
More informationHeavy Duty Cargo Blocks
Heavy Duty Cargo Blocks Manufactured in accordance with: B.S. 4018: 1966 A.S. B298-1871 Special Features: Tested and Certified with easy to read W.L.L plate Quick action single snatch facilitates ease
More informationMy family my fields my Fendt.
Fendt E-Series 5185 Fendt kw HP PS 5185 E 129 175 My family my fields my Fendt. You can always rely on your family. Just like on the next eneration of the Fendt E-Series. These redesined combines are equipped
More informationNewness Pre-feeder
Newness 00 Pre-feeder This new patented product has been especially designed for racing yachts. It offers the possibility of easy opening and closing during a headsail hoist, and allows the luff line to
More informationKNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP
-Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG
More informationLinear Bushing LBE LBD LBB LM LME LMB
Linear Busin LBLBLBBLMLMLMB Linear Busin is a i precision linear motion rollin uide wic travels alon a saft to acieve endless linear motion. In te external cylinder, a retainer, steel balls, etc. are compactly
More informationW01 Rolled Steel Integral Horsepower Motor
Motors Automation Enery Transmission & Distribution Coatins Interal Horsepower Motor Technical Cataloue NEMA Market The new eneration of WEG eneral purpose steel motors. The motors of the line are the
More informationCASTORS & WHEELS CATALOGUE
CASTORS & WHEELS CATALOGUE www.castorsandwheels sw.co.uk Power Transmission South West 2015 All rights reserved. No part of this publication may be reprinted or reproduced or utilised in any form or by
More informationEfficient and precisely tailored
Efficient and precisely tailored This is what we stand for. You want to implement your machine and plant concepts efficiently and easily or optimise eistin concepts to reduce costs? Then, Lenze is the
More informationPRODUCT MANUAL 52ST (V.4.0) 52ST FS (V.4.0.F) RON-WPM ST/52STFS-Rev.3
PRODUCT MANUAL 52ST (V.4.0) RON-WPM-710021-52ST/52STFS-Rev.3 52ST (V.4.0) p2 EXPLODED VIEW ITEM. 3 MODEL ST - PART No. 540406 ITEM. 3 MODEL ST FS - PART No. 540411 ITEM. 16 - PART No. 589111 ITEM. 15 -
More informationR i g P o w e r M C C - 1 S e r i e s
R i P o w e r M C C - 1 S e r i e s Rated Up to 1,135 Amps @ 1,000 Volts AC/DC IP68 Inress Protection and with Delue Protection up to DTS01:91 Utilizes Number 24 Shell Also available in an Explosion Proof
More information16. Electricity Hole punches and accessories 642. Cable sheath strippers 624. Wire strippers 626. Physical measurement 650
622 www.facom.com 16. Electricity Cable sheath strippers 624 Hole punches and accessories 642 Pivotin blade sheath strippers... 624 Straiht/helical blade sheath strippers... 624 Multi-function sheath strippers...
More informationONLINE INSTRUCTIONS 40 mm, 57 mm, 75 mm Carbo Ratchets
ONLINE INSTRUCTIONS 40 mm, 5 mm, 5 mm Carbo Ratchets US Tel: (+0) 6-6-0 Web: www.harken.com Email: harken@harken.com Italy Tel: (+) 0.55 Web: www.harken.it Email: techservice@harken.it Strictly follow
More informationDOWNSPOT DESIGN - QUATTROBI TECHNICAL DEPARTMENT
DOWNSPOT Small-sized fixed and adjustable recessed luminaires combine the latest technoloy with a focus on details, i.e. special finishin and colours, to provide decorative solutions which play the main
More informationkva kw kva kw db(a) a 7 db(a)
1 / 8 Technical specifications Diesel Generator Set QIS 10 Voltae: 400/230 V Frequency: 50HZ Genset Imae for illustration purposes only TECHNICAL INFORMATION Standby Power (ESP) Prime Power (PRP) Mechanical
More informationFor maximum performance when removing glass and in the automotive workshop: FEIN SuperCut Automotive.
For maximum performance when removing glass and in the automotive workshop: FEIN SuperCut Automotive. As one of the world s most successful power tools for removing rigidly bonded panes of auto glass,
More informationS Couplers. Series KK. Series KKH. Series KK/KKH. RoHS KQ2 KQB2
Series KK/KK he pullin strenth for the plus and sockets has been improved. wice as stron as the conventional models. Series KK With sleeve lock (Except for ) Effective area 3. to 2 mm 2 Series Series KK
More informationTwinTech & SingleTech Combi Overview
TwinTech & SingleTech Combi Overview Locking a Set of Casters Simultaneously The Combi style of TwinTech and SingleTech casters is the preferred choice when all casters in a set need to be locked simultaneously.
More informationECOLIFT HEAVY-DUTY IN-GROUND LIFT. The superior flexible solution with a lifting capacity of 13,500 kg per scissor and a total of 54,000 kg
HEAVY-DUTY IN-GROUND LIFT ECOLIFT The superior flexible solution with a lifting capacity of 13,500 kg per scissor and a total of 54,000 kg STERTIL SUPERIOR SOLUTIONS Superior Solutions The Stertil Group
More informationNITERIDER MISSION STATEMENT ABOUT US
NiteRider Solas 150 NiteRider Pro 3600 Enduro Remote NITERIDER CEO / FOUNDER Tom Carroll NITERIDER MISSION STATEMENT NiteRider is dedicated to desinin the hihest quality performance products, usin the
More informationCable pulling technology
Cable pulling technology Fish tapes/pulling rods 556 Polyester 556 Perlon 556 Nylon 556 Steel 557 Flex-O-Twist speed flex leader 557 Fibreglass cable pulling rods 557 Cable pulling systems 55 With Polyester
More informationNELDISC Metal seated high performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operating Instructions
NELDISC Metal seated hih performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operatin Instructions 2 L6 70 en 10/2017 2 2 L6 70 en Table of Contents 1 GENERAL...3 1.1 Scope
More informationHOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
More informationW22 Three-Phase Electric Motor
Motors Automation Enery Transmission & Distribution Coatins W22 Three-Phase Electric Motor NEMA Technical Catalo W22 Line The increasin demand for electrical enery to sustain lobal development requires
More informationSingleTech. SingleTech Solus Specifications. SingleTech Engineering
Solus Specifications Body and Wheel Centers Material chosen for light-weight, high load capacity, resistance to abuse, electrical safety and finish characteristics. Body consists of two pressure-diecast
More informationMotor starters up to 150 A
Contents Motor starters up to 50 A TeSys GV, GV3 and GV7 motor circuit-breakers b Thermal-manetic circuit-breakers Selection uide.............................................. pae 30 v Presentation.............................................
More informationD. S. HULL COMPANY, INC
Smooth Center Diamond Pattern Center DP40-B DP40-W Deck Plates Beckson Pry-Out Deck Plates Extra heavy-duty O-ring to assure a watertight fit. Nonskid surfaces on lid. Pry-out plates are to be installed
More informationRBT3E M RBT4E M
2 PIECE ROD END BEARING SELF-LUBRICATING RBT-E e.com ROD END MALE LINER 33 Stainless Steel 44C Stainless Steel Teflon / Fabric SELF- LUBRICATING 2 PIECE H F TH L α φo SφDB Limit eiht H7 ±.5 ±.3 ±.5 JIS
More informationPRODUCT MANUAL 12ST (V.4.0) 12ST FS (V.2.0.F) RON-WPM ST/12STFS-Rev.3
PRODUCT MANUAL 12ST (V.4.0) RON-WPM-710212-12ST/12STFS-Rev.3 12ST (V.4.0) EXPLODED VIEW ITEM No. 3-537551 ITEM. 3 MODEL 1 ST - PART No. 537551 3.1 p2 2 3.2 3 3.3 4 5 ITEM No. 3-537510 ITEM. 5 - PART No.
More informationPRODUCT MANUAL 46ST (V.5.0) 46ST FS (V.5.0.F) 50ST (V.2.0) 50ST FS (V.2.0.F) RON-WPM ST/46STFS/50ST/50STFS-Rev.3
PRODUCT MANUAL RON-WPM-710246-46ST/46STFS/50ST/50STFS-Rev.3 EXPLODED VIEW ITEM. 3 MODEL ST - PART No. 544521 ITEM. 3 MODEL ST FS - PART No. 544530 p2 ITEM. 12 - PART No. 775600/775650 ITEM. 13 - PART No.
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger ROV Chain Block Model No RCB Main Features Available in 3.0t, 10.0t, 15.0t and 20.0t capacity Fully corrosion protected Several choices of interface: o Hydraulic Hot Stab connection type A dual port
More informationMechanical Hoists. Catalog 1100 July Hoists - Mechanical Phone: Web: hubbellpowersystems.
Mechanical Hoists Catalog 1100 Page 1101 RATCHET HOISTS User-friendly operation and construction. Experienced operators prefer CHANCE lever hoists for longterm, dependable performance. Light-weight for
More informationSS11 Tiger Subsea Lever Hoist
SS11 Tiger Subsea Lever Hoist Main Features Range from 800kg 10000kg *NEW* Twin Cam shaped pawl design Proven track record Double switch brake mechanism Marine specific friction discs Meets and exceeds
More informationTiger Lifting Home of the Tiger hoisting, winching and height safety ranges
Tiger Corrosion Resistant Chain Block Model No. SS12 with clevis adaptor and shackle Spark resistant option Main Features Suitable for use in multi-immersion applications DNV GL Verification tested according
More informationkva kw kva kw db(a) a 7 db(a)
1 / 8 Technical specifications QIS 35 Voltae: 400/230 V Frequency: 50HZ Genset Imae for illustration purposes only TECHNICAL INFORMATION Standby Power (ESP) Prime Power (PRP) Mechanical structure Enine
More informationHepcoMotion. SBD Sealed Belt Drive
HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load
More informationSENSOTORK 701 Electronic torque wrench
Torque tools SENSOTOK 70 Electronic torque wrench 2 3 4 6 Advantaes at a lance Slim, compact shape for smaller torques from N m upwards Units of measure: N m, cn m, ft lb, in lb eadins independent of point
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationPRODUCT SPECIFICATION
DATE: June 2014 DESCRIPTION: Deluxe Combination Bar APPLICATION: Jeep Wrangler JK PART NO. & BARCODE : Refer Table Page 2 PRODUCT GROUP & FITTING: Refer Table Page 2 AVAILABILITY DATE: PRODUCT SPECIFICATION
More informationModified Screw Jack for Lifting Operation in Industrial Setting Benjamin Ezurike 1a*, Modestus Okwu 2b
International Journal of Enineerin and Technoloies Submitted: 017-10-11 ISS: 97-63X, Vol. 13, pp 39-50 Revised: 017-11-30 doi:10.1805/www.scipress.com/ijet.13.39 Accepted: 017-1-0 017 SciPress Ltd., Switzerland
More informationCOLUMBUS McKINNON CORPORATION
COLUMBUS McKINNON CORPORATION INNOVATIVE ENGINEERING DESIGNED FOR YOU To create the best ratchet lever hoist on the market, Columbus McKinnon started with a fundamental question how do people use ratchet
More informationModula Plus. Technical documentation Ver 1.01
Modula Plus Technical documentation Ver 1.01 Table of contents Introduction Overview 2 General characteristics Main characteristics 4 Functional sements of a column 6 Main components of a functional 8
More informationProduct catalog. Stepper motors Linear actuators Stepper motor drivers.
Product catalo Stepper motors Linear actuators Stepper motor drivers www.nanotec.com 1 Overview of contents bout us 5 Facts, fiures and essential information 6 2-phase stepper motors SP0618 - SP5575 14
More informationBall Screw Support Units. Outline. Compact Support Units. Variation
all Screw s Outline Variation Compact smsu seriesprovide 2 choices of ousin type, which are illow type and Flane type. Fixed side and supported side Units are standardized for each type. In case of illow
More informationApron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty
Apron Feeders TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders Terex Jaques Apron Feeders use heavy-duty
More informationProduct Line Overview/Comparison
Product Line Overview/Comparison Design types Series Sizes Raceway diameters Maximum torque 1) Maximum tilting moment 1) 2) Static axial load rating Load carrying capacity 1) Static radial load rating
More informationCatalogue 2018 Mobile Security
ABUS l Auust Bremicker Söhne www.abus.com Cataloue 2018 Mobile Security Motorbike and Scooter Locks ULTIMATE SECURITY PACKAGES 59/12HKS170 + 8077 + 71950 59/12HKS170black l. 8077 reen 71949 59/12HKS170black
More informationXT winches. simple opening. new XT system. vertical knurling. CNC base. of cleaning and maintenance.
XT winches simple opening new XT system vertical knurling min friction max friction chrome plated (CH) CNC base hard black anodized aluminium (AL) 14 new self-tailing winches available in the following
More informationGravity conveyors the cost effective solution for transporting
Gravity conveyors the cost effective solution for transporting unit loads. Gravity conveyors are the cost effective solution to many materials handling needs. The rollers reduce surface friction and allow
More informationROTACTION Sockets and bits for Industrial power tools
ROACION s an bits for Inustrial power tools ROACION the professional Atlas Copco solution for safer tihten Atlas Copco offers a new eneration of covere sockets: ROACION. he trensett, avance ROACION concept
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationPosition detectors.
Position detectors Pressure decay sensor 00 % pneumatic Also available in ATEX version for use in potentially explosive atmospheres in accordance with 94/9/EC Directive Pressure decay sensor 8 04 0 Operatin
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationkva kw kva kw db(a) a 7 db(a)
1 / 8 Technical specifications QIS 25 Voltae: 400/230 V Frequency: 50HZ Genset Imae for illustration purposes only TECHNICAL INFORMATION Standby Power (ESP) Prime Power (PRP) Mechanical structure Enine
More informationBlower Drive B-1 Section Contents. Page. Drive Belts B-2. Belt Length Chart B-3. Sprockets B-4. Sprockets B-5. Sprocket Sectional Views B-6
Blower Drive B-1 Section Contents Drive Belts Belt Length Chart Sprockets Sprockets Sprocket Sectional Views 14mm Overdrive Chart 8mm Overdrive Chart 8mm Overdrive Chart 11mm Overdrive Chart Idler Pulleys
More informationResearch of the Bus Secondary Hydraulic Transmission System under Variable Pressure Rail
Research of the Bus Secondary Hydraulic Transmission System under Variable Pressure Rail Zan Faye 1, Wan Yon 1 Department of Enineerin Mechanical, Shandon University, Jinan, China Shandon Jiaoton University,
More informationÉlectronics. "Micro-TechJ" screwdrivers
"Micro-TechJ" screwdrivers "Micro-TechJ" screwdrivers Électronics Efficient The screwdriver end is desined to provide an effective pressure area in each of the three micro-enineerin screwdriver positions.
More information