Woody. Woody ø 140 page 584. MaxiWoody compact ø 260 page 590. Miniwoody ø 85 page 584. MaxiWoody ø 315 page 590. design Mario Cucinella

Transcription

1 Woody design Mario Cucinella Miniwoody ø 85 page 584 Woody ø 140 page 584 MaxiWoody compact ø 260 page 590 MaxiWoody ø 315 page 590 Woody Multi Chip installation systems MaxiWoody pole systems Application strip on 90 edge Support for attaching to pole Application strip at 90 angle FrameWoody page iguzzini.com/woody

2 ø 380 page 590 MaxiWoody ø 484 page 590 MultiWoody page 471 CityWoody page 431 Multiple wall support page 471 iguzzini.com/woody 583

3 Miniwoody - Woody Opti Beam LMS IP66 IK07 IK08 03 Floodlight for use with halogen and discharge lamps, monochromatic and RGB s. The fi xture is installed in the ground, wall-mounted (with a fi sher), polemounted, and branch-mounted. The fi xture has an optical assembly and base. Optical assembly, arm, base and frame made of aluminium alloy; sodium-calcium tempered sealing features glass, transparent colourless, 4 mm-thick, and secured with captive screws; silicone gaskets between the glass and outer frame; refl ector made of ultra-pure aluminium. Frame has slots for rainwater drainage. Optical assembly double adjustability. Available in versions with monochromatic Single Chip and C.o.B. and Single Chip with RGB dynamic colour change compatible with light management systems. Luminaire ready for Woody Multichip pass-through wiring. All screws are A2 stainless steel. Optics * Elliptical optics are obtained by installing the specifi c accessory. Miniwoody SS a 8 M a 26 F a 40 E* Woody SS a 8 S a F a E* 584 iguzzini.com/woody

4 Miniwoody - Woody The accessories allow the features of the lighting produced by the single luminaire to be altered, for highly professional lighting effects. The combination of fi lters allows the lamp colour features to be changed to make the most of the objects or space illuminated. Opti Beam Lens Diffuser glass Cylindrical screen at 45 Refractor for elliptical distribution Spill ring The cylindrical screen increases the defi nition of the cone S - Spot for C.o.B versions Miniwoody interchangeable refl ector diffuser glass Spill ring Cylindrical screen at 45 Woody Refractor for elliptical distribution The cylindrical screen increases the defi nition of the cone S - Spot for C.o.B versions Installations Miniwoody and Woody have a wide variety of installation systems, making them highly fl exible. Plate with spike for installation on ground Belt for application on branches Support for mounting on pole (Woody Multi Chip) Application strip on 90 edge (Woody Multi Chip) Application strip on 90 edge (Woody Multi Chip) iguzzini.com/woody 585

5 new Miniwoody 04 BLACK 15 GREY Miniwoody new Available new Opti Beam lens 100 ø K - CRI 80 8W E W E W E K - CRI 80 8W E W E W E Complete with power supply. ø 100 accessories Refractor for elliptical distribution Cylindrical screen at diffuser glassbzd5 65 Prismatic diffuser glass for versions Opti Beam Refractor super spot (8 )X flood (26 )X wide flood (40 )X External spill ring BZD3 04 for BF92-BU78-BU79 Cylindrical screen * For C.o.B. versions, use in combination with prismatic diffuser glass code 6177 is recommended for BU78-BU79 installation systems Stainless steel plate with spike for garden installation B Belt for application on branches Diameter= mm Stainless steel belt with tie-rods for securing to ground Box IP68 for multiple connection Larger diameters can be achieved by linking several belts together B Multiple junction box IP66BZK iguzzini.com/code

6 Woody 04 BLACK 15 GREY Woody C.o.B. Multi Chip 4000K - CRI K - CRI 80 17W BU W BA W BU W BA W BU K - CRI K - CRI 80 12W BA W BU W BA ø W BU W BU Complete with power supply. 165 ø Complete with power supply. RGB - Multi Chip - DMX512-RDM (48-52Vdc) ø 100 Compatible with light management systems in the iguzzini range illustrated on page 749. For system definition, refer to the instruction sheet. ø 100 RGB - DMX 11W BV W BV accessories Refractor for elliptical distribution Cylindrical screen at diffuser glassbzf7 65 Prismatic diffuser glass for versions Cylindrical screen * For C.o.B. versions, use in for BU82-BU83 combination with prismatic diffuser glass code 6181 is recommended Interchangeable reflectors for C. or B. versions spot (10 ) flood (28 ) wide flood (41 ) installation systems Application strip at 90 angle Application strip on 90 edge Belt for application on branches Diameter= mm for BA40-BA41-BA42-BA BV68-BV69 Larger diameters can be achieved by linking several belts together for BU82-BU83-BU84 BU85-BU86-BU87 Support for attaching to pole Diameter=40 60 mm Stainless steel plate with spike for garden installation for BA40-BA41-BA42-BA BV68-BV69 B for BA40-BA41-BA42 BA43-BV68-BV69 B for BU82-BU83-BU84 BU85-BU86-BU87 Stainless steel belt with tie-rods for securing to ground for BU82-BU83-BU84 BU85-BU86-BU87 Data refer to the nominal light fl ow of the source. System values are available in the supplement Code/page reference at the end of the catalogue. Technical information may change alongside technological progress. Consult iguzzini.com for ongoing updates. iguzzini.com/code 587

7 Woody components Electronic power supply designed to mount on a DIN standard profile 120 W VIN=88 264Vac / 47 63Hz VOUT=48 55V (SELV) Dim. 40x114x125h Electronic power supply designed to mount on a DIN standard profile 240 W VIN=88 264Vac / 47 63Hz VOUT=48 55V (SELV) Dim. 63x114x125h Electronic power supply designed to mount on a DIN standard profile 480 W VIN=90 264Vac / 47 63Hz VOUT=48 55V (SELV) Dim. 86x114x125h code colour BZ14 00 for BV68-BV69 BZ15 00 for BV68-BV69 BZ16 00 for BV68-BV69 5-pole connector IP68 5-pole Y connector IP68 For connection between DMX or DALI signal cable and power supply cable Cap for connectors + terminal resistance 120 BZS6 04 for BV68-BV69 BZN7 00 for BV68-BV69 BZQ7 00 for BV68-BV69 Multiple junction box IP68 B for BU82-BU83-BU84 BU85-BU86-BU iguzzini.com/code New Congress Centre - Rome, Italy Architectural project: Massimiliano & Doriana Fuksas Lighting project: Speirs + Major Photo: Moreno Maggi

8 pinterest.com/iguzzini

9 design Mario Cucinella Opti Beam LMS K K IP67 IK08 03 Direct light luminaire for use with metal halide, sodium vapour, and s. The fi xture is installed into the ground, wall-mounted (with a fi sher). The fi xture has an optical assembly and support. Optical compartment and frame in aluminium alloy; clear, colourless sodium-calcium tempered sealing glass, 4 mm thick; super-pure aluminium refl ector. Optical assembly double adjustability. Graduated scale and mechanical aiming lock. High performance optics (Opti Smart) and uniform light distribution. C.o.B versions with Opti Beam refl ector ensuring highly effi cient lighting. Monochromatic version with 24/36- circuit, optics with plastic lenses, glass with customised screen printing, and Vac 50/60Hz built-in electronic power supply. RGB and Tunable white versions complete with power supply and DMX512-RDM electronic control card. Luminaire ready for pass-through wiring. All screws are A2 stainless steel. Retention cable Slots allowing rainwater to run off Optics * Elliptical optics are obtained by installing the specifi c accessory. SS a 6-8 S a M a F a WF a E* 590 iguzzini.com/woody

10 The accessories allow the features of the lighting produced by the single luminaire to be altered, for highly professional lighting effects. The combination of fi lters allows the lamp colour features to be changed to make the most of the objects or space illuminated. Interchangeable refl ectors Diffuser glass Spill ring Cut-Off 60 Cross-bladed louvre Visor The directional fl ap can be fi tted individually or with others (max. 4) depending on lighting design requirements Compact Refractor for elliptical distribution Blade louvre Protective grille The cylindrical screen increases the defi nition of the S - Superspot cone for C.o.B versions MaxiWoody system This range of fl oodlights can be installed on three pole systems: CityWoody (page 431), FrameWoody (page 465), MultiWoody (page 471). MultiWoody horizontal arms Multiple wall support FrameWoody CityWoody Specifi c for street lighting iguzzini.com/woody 591

11 Visual comfort The MaxiWoody system boasts a vast range of accessories for guaranteeing extremely flexible, effective lighting, providing the best solution for visual comfort, avoiding unwanted glare and reducing light pollution. Spill ring full comfort Blade louvre Cross-bladed louvre A broad range of anti-glare Spill Rings to ensure maximum visual comfort. Spill ring circular Cut-Off 45 Spill ring circular Cut-Off 60 Spill ring circular Full Comfort The louvre screening angles apply for all sizes of floodlight 592 iguzzini.com/woody

12 15 GREY new Available from April ø260 - C.o.B. - Spot ø260 - C.o.B. 4000K - CRI 80 - DALI / Push Dim 35W BU K - CRI 80 - DALI / Push Dim 35W BU K - CRI 80 - DALI / Push Dim 35W BU W BU K - CRI V 24W BU K - CRI 80 - DALI / Push Dim 35W BU W BU ø K - CRI V 24W BU89 15 Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. 270 ø K - CRI V 24W BU W BU K - CRI V 24W BU W BU93 15 Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. ø260 - Multi Chip - Spot 4000K - CRI 80 24W K - CRI 80 24W new ø315 - C.o.B. - Spot 4000K - CRI 80 - DALI 52W BV K - CRI 80 - DALI 52W BV ø ø260 HIT-CE (G12) Electronic 35W W W ø K - CRI 85 - On/off - Class II 87W E K - CRI 85 - On/off - Class II 87W E Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. 35W AL W W Compatible with light management systems in the iguzzini range illustrated on page 749. For system definition, refer to the instruction sheet. 70W W AL new ø315 - C.o.B. ø K - CRI 80 - DALI 52W BV W BV K - CRI 80 - DALI 52W BV W BV K - CRI 85 - On/off - Class II 87W E W E K - CRI 85 - On/off - Class II 87W E W E Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. Data refer to the nominal light fl ow of the source. System values are available in the supplement Code/page reference at the end of the catalogue. Technical information may change alongside technological progress. Consult iguzzini.com for ongoing updates. iguzzini.com/code 593

13 15 GREY ø315 - Multi Chip W min W max lm min lm max ø380 Opti Smart - Multipower 4000K - CRI 80 36W BB K - CRI 70 - ST1.2 38W 51W BV K - CRI 80 36W BB K - CRI 70 - ST1.2 38W 51W BT ø RGB - DMX-RDM 34W BV W BV53 15 Tunable white - DMX-RDM 36W BV W BV55 15 Complete with power supply and electronic DMX512-RDM control card. DMX specifications require the insertion of a 120 Ohm terminating resistor (code BZQ7) to be placed between the DATA+ and DATA- cables of the last product in the line. Tunable white: 2700K 6000K 352 ø K - CRI 70 - ST1.0 17W 22W BV K - CRI 70 - ST1.0 17W 22W BT89 15 Additional options: Middle of the Night, Bi-energy. The output lumen and power value of the systems refer to the Profiles with the greatest light efficiency (Profile 1 and 4). ø315 HIT (G12) - HIT-CE (G12) 70W HIT-CE (G12) 70W W ø315 HIT-DE (Rx7s) - HIT-DE-CE (Rx7s) - HST-DE (Rx7s) 70W ST W optic ø380 W optic ø484 HIT (G12) - HIT-CE (G12) HIE (E40) - HSE (E40) ø W W W ø380 HIT-DE (Rx7s) - HIT-DE-CE (Rx7s) - HST-DE (Rx7s) 150W ST ø W W HIT (E40) 250W W W W HIT (E40) - HST (E40) 400W USB pen profiler BZX1 04 Complete with cable and battery for versions HIT-CE (G12) 250W W W iguzzini.com/code

14 ø 260 ø 315 ø 380 ø 484 installation systems Aluminium flange for installation on poles ø 120 mm Flanges with code are in steel Aluminium flange for installation on poles ø 102 mm Reinforcement bracket for application on a pole Multiple support for two floodlights Multiple support for three floodlights * 15 for 1 floodlight for 1 floodlight for 1 floodlight for 1 floodlight * 15 for 2 floodlights for 2 floodlights for 2 floodlights for 2 floodlights for 1 floodlight for 1 floodlight for 1 floodlight for 2 floodlights for 2 floodlights for 2 floodlights Plate for ground anchorage Accessory retainer cable BZF * To be used in combination with reinforcement bracket code 6175 Data refer to the nominal light flow of the source. System values are available in the supplement Code/page reference at the end of the catalogue. Technical information may change alongside technological progress. Consult iguzzini.com for ongoing updates. iguzzini.com/code 595

15 accessories ø 260 ø 315 ø 380 ø 484 Refractor for elliptical distribution BZD for for for and C.o.B. and C.o.B. versions versions diffuser glass BZD for and C.o.B. versions for and for C.or.B. versions for for Prismatic diffuser glass for C.or.B. versions for C.or.B. versions Visor BZE for Cylindrical screen For C.o.B. versions, use in combination with prismatic diffuser glass BZE for BU88 for BV00-BV01-E981-E982 BU89-BU94-BU95 Single directional fin BZE for Circular spill ring Cut-Off 45 Circular spill ring Cut-Off 60 BZD for for for BZE0 04 for BZ09 04 BZ26 04 BZ30 04 for for for Circular spill ring Full Comfort BZE3 04 BZ08 04 BZ25 04 BZ29 04 for for for for Blade louvre BZE4 04 BZ23 04 BZ27 04 BZ31 04 for for for for Cross-bladed louvre BZE5 04 BZ24 04 BZ28 04 BZ32 04 for for for for Interchangeable reflectors for C. or B. versions spot (8 ) flood (30 ) wide flood (48 ) Protection grille \BZE iguzzini.com/code Templo Expiatorio del Sagrado Corazón de Jesús - León, Guanajuato, Mexico Lighting Project: Lighteam Gustavo Avilés Fernando Vazquez Lighting suppliers: Italli Innovación S.A. de C.V. Photo: Fabian Garcilita Ruiz Velasco