Product Catalog. Visit Southern California Valve

Transcription

1 Southern California Valve Product Catalog MANUFACTURING FACILITY Maryton Ave. Santa Fe Springs, CA Phone: (562) Toll Free: (800) Fax: (562) Visit SALES AND PROJECT OFFICE 4313 B - FM 2351 Friendswood, TX Phone: (281) Fax: (281) sales@scvvalve.com

2 Complete Product Line Call SCV (281) for all your valve needs or visit us on the Carbon & Stainless Bolted Bonnet Gates Sizes: 2-52 Class: Cast Steel Bolted Cover Piston Checks Sizes: 1-24 Class: Carbon & Stainless 3-Piece Full Port Balls Sizes: 1/4-3 Class: 2000 W.O.G. Carbon & Stainless Pressure Seal Gates Sizes: 2-24 Class: Cast Steel Thru Conduit Slab & Expanding Gates Sizes: 2-48 Class: Carbon & Stainless Bolted Bonnet Globes Sizes: 2-18 Class: Dual Plate Checks Wafer & Flanged Wafer Sizes: Wafer Class: Flanged Sizes: 8-48 Flanged Class: Carbon & Stainless Bolted Cover Full Port Swing Checks Sizes: 2-52 Class: Carbon & Stainless 2-Piece Floating Balls Sizes: 1/2-10 Class: Forged Steel Gates Sizes: 3/8-2 Class: Forged Steel Globes Sizes: 3/8-2 Class: Forged Steel Swing Checks Sizes: 3/8-2 Class: Forged Steel Piston Checks Sizes: 3/8-2 Class: Carbon & Stainless Pressure Seal Globes Sizes: 2-16 Class: Carbon & Stainless Bolted Cover Checks Sizes: 2-52 Class: Carbon & Stainless 2-Piece Trunnion Balls Sizes: 2-36 Class: Carbon & Stainless 3-Piece Trunnion Balls - API 6A Sizes: 2-1/ /8 Pressure: 2000, 3000 & 5000 Cast Steel Dual Seal Expanding Plugs Sizes: 2-24 Class: Cast Steel Lubricated Plugs Sizes: 1/4-24 Class: Carbon & Stainless Pressure Seal Checks Sizes: 2-24 Class: Carbon & Stainless 3-Piece Trunnion Balls - API 6D Sizes: 1-48 Class: Carbon & Stainless Rising Stem Balls Sizes: 2-24 Class:

3 Table of Contents SCV Figure Number Chart i & ii Technical Data for Optional Seal & Seat Selections iii Seal & Seat Pressure Temperature Chart iv Valve ID Tag & Valve Markings Identification v SCV Introduction 01 Carbon & Stainless Steel Wedge Gates 02 Carbon & Stainless Steel Pressure Seal Gates 07 Cast Steel Thru Conduit Slab & Expanding Gates 11 Carbon & Stainless Steel Globes 23 Carbon & Stainless Steel Pressure Seal Globes 28 Carbon & Stainless Steel Standard Swing Checks 32 Carbon & Stainless Steel Full Port Swing Checks 36 Carbon & Stainless Steel Pressure Seal Checks 40 Cast Steel Piston Checks 44 Dual Plate Checks - Wafer & Flanged 49 Forged Steel Gates 55 Forged Steel Globes 57 Forged Steel Piston Checks 59 Forged Steel Swing Checks 61 Cast Steel Pressure Balanced Lubricated Plugs 63 Dual Seal Expanding Plugs 66 Carbon & Stainless Steel 3 - Piece Full Port Balls 70 Carbon & Stainless Steel 2 - Piece Flanged Floating Balls - Full & Reduced Port 73 Carbon & Stainless Steel 2 - Piece Trunnion Mounted Balls - Full & Reduced Port 84 Carbon, Alloy, & Stainless Steel 3 - Piece Trunnion Mounted Balls - API 6A 98 Carbon & Stainless Steel 3 - Piece Trunnion Mounted Balls - API 6D - Full & Reduced Port 107 Carbon & Stainless Steel Rising Stem Balls 125 Pressure Temperature Ratings - ASME B Flange Dimensions - ANSI B16.5 & B Butt-welding Dimensions - ANSI B Industry Standards for Valve Manufacturing 136 Terms & Conditions 137

4 SCV Figure Number Chart Valve Type Bore Size Pressure Class Body/Bonnet Body Material Trim Material ANG = Angle.02 = 1/16.5 = 50 B = Bolted 00 = Cast Iron 10 = CR13 BAL = Ball.03 = 1/8.7 = 75 C = Cryo 02 = LCC 11 = CR13/HF BCK = Ball Check.25 = 1/4 01 = 150 L = Lug 03 = LC2 12 = CR13 HF/HF BFY = Butterfly.50 = 1/2 02 = 200 N = NRS Bolted 05 = Ductile 13 = Steel/ENP CHK = Choke.07 = 9/16 03 = 300 P = Pressure Seal 08 = A216 WCC 14 = Steel/Chrome CTL = Control.08 = 13/16 04 = 400 S = Seal Weld 09 = WC9/F22 15 = LF2/ENP DCK = Dual Wafer Check.75 = 3/4 06 = 600 T = Top Entry 10 = A216 WCB 16 = 416 DSP = Dual Seal Plug 01 = 1 08 = 800 U = Union 11 = A352 LCB 17 = 17 4-PH EPG = Expanding Gate 1.2 = 1-1/16 09 = 900 W = Wafer 12 = A350 LF2 20 = Alloy 20 FCK = Full Port Check 1.3 = 1-1/8 12 = 125 Y = Y-Pattern 13 = A = Alloy 20/HF FPP = Full Port Plug 1.4 = 1-1/4 15 = = LC3/LF3 22 = F-22 GAT = Gate 1.5 = 1-1/2 17 = = A217 C5 25 = Inconel Overlay GLB = Globe 1.8 = 1-13/16 20 = = WC6/F11 28 = Sanicro 28 KIF = Knife 02 = 2 25 = = 17-4 PH 30 = 4130 NEG = Needle Globe 2.2 = 2-1/16 30 = = LF6 31 = 321 NEP = Needle Plug 2.3 = 2-1/8 45 = = Alloy = 304/HF PCK = Piston Check 2.5 = 2-1/2 50 = = F = 304 PLG = Plug 2.7 = 2-9/16 60 = = 254 SMO 35 = 316/HF RSB = Rising Stem Ball 03 = 3 10 = = F5 36 = 316 SCK = Swing Check 3.3 = = = F91 37 = 317/HF TCG = Thru Conduit Gate 04 = 4 27 = C12A 38 = 317 TCK = Tilting Disc Check 4.2 = 4-1/16 28 = Sanicro28 39 = 1040 WCK = Wafer Check 05 = = C12/F9 41 = = = AISI = Full Teflon 08 = = = F44 Duplex 10 = = 321L 47 = = = 304L 48 = 347/HF 14 = = = Carpenter 16 = = 316L 50 = Monel 18 = = = F51 Duplex 20 = = 317L 52 = Nickel Alloy 22 = = = F53 Duplex 24 = = AISI = A516/ENP 26 = = F44 Duplex 56 = A36 ENP 30 = = = A537 ENP 32 = = 347L 60 = Duplex 36 = = Carpenter 61 = Super Duplex 40 = = Monel 62 = 625 Inconel 42 = = F51 Duplex 63 = 600 Inconel 48 = = Nickel Alloy 69 = Naval Brass 50 = = F53 Duplex 70 = Bronze 54 = = ASTM A = Aluminum 60 = = ASTM A36 78 = 718 Inconel 72 = = ASTM A = Alu/Brz 78 = = Duplex 81 = Ni Alu/Brz 61 = Super Duplex 82 = 825 Inconel 62 = 625 Inconel 83 = Hastelloy 63 = Inconel = = Naval Brass 87 = = Bronze 90 = Titanium 71 = Aluminum 91 = Tantalum 78 = 718 Inconel 92 = 925 Inconel 80 = Alu Bronze 93 = Tungsten Carbide 81 = Ni Alu/Brz 96 = Zirconium 82 = 825 Inconel 83 = Hastelloy B 84 = Hastelloy C 86 = AISI = = Titanium 91 = Tantalum 96 = Zirconium i

5 SCV Figure Number Chart Ends Operation Configuration Seal Material Seat Material Body Pieces Special C = Clamp B = Bare Stem 32 = 3 Way 2 Port 4 = 304 Ring D = Devlon 1 = 1 Piece Body By Pass F = Flat D = Dual Acting 3F = 3 Way Floater 6 = 316 Ring G = Graphite 2 = 2 Piece Body Cadium Coat H = Hub E = Electric 3T = 3 Way Trunnion B = Buna K = PCTFE 3 = 3 Piece Body Epoxy Paint J = RTJ G = Gear 43 = 4 Way 3 Port E = EPDM M/S = Metal Stellite Outside WT N = Nipples H = Handwheel 4F = 4 Way Floater F = Fluorosilicone M/TC = Metal Tungsten Carbide QPQ Inturnal O = ODD L = Lever 4T = 4 Way Trunnion G = Grafoil N = Nylon Slam Retard R = RF O = Oil/Gas FF = Full Floater H = HNBR O = Nova Stancoat S = SW S = S/Return FT = Full Trunnion N = Neoprene P = PEEK Sub Sea T = TH Y = Hydraulic L = Lubricated P = Polyuerethane R = RPTFE Teflon Lined W = WE RF = Red, Floater R = NBR S = Stellite Top Extension RT = Red, Trunnion S = Silicone T = Teflon Zinc Base SJ = Steam Jacket T = Teflon U = Floursint V = Viton Figure Number Profile bal b r l ft No. Figure Number Code Description 1 Valve Type Identifies the valve body design (gate, globe, ball, plug, etc.) 2 Bore Size Identifies nominal port size (1/4 to 78 ) 3 Pressure Class Identifies pressure classes ranging from 50 to 15,000 4 Body/Bonnet Identifies body and bonnet material configuration (bolted bonnet, pressure seal, top entry, etc.) 5 Body Material Identifies body material composition (A105, WCB, Stainless Steel, F51, etc.) 6 Trim Material Identifies trim material composition (ENP, 316, F6, Cr13, HF, etc.) 7 Ends Identifies end connection configuration (weld end, RTJ, socket weld, hub, etc.) 8 Operation Identifies valve operation mechanism (electric, gear, hydraulic, lever, etc.) 9 Configuration (ball only) Identifies valve configuration (floater, trunnion, etc.) Sample Figure Numbers & Descriptions Valve Type Sample Figure # Description Trunnion Ball bal0201b1313rlft Ball Valve, 2, 150#, Bolted Bonnet, A105 Body, ENP Trim, Raised Face, Lever Operated, Full Port, Trunnion Mtd. Floating Ball bal0201b1036rlff Ball Valve, 2, 150#, Bolted Bonnet, A216 WCB Body, 316SS Trim, Raised Face, Lever Oper., Full Port, Floating Ball Dual Plate Wafer Check dck0406w1036r Dual Plate Wafer Check, 4, 600#, Wafer Style, A216 WCB Body, 316SS Trim, Raised Face Full Port Swing Check fck0409b1036j Full Port Swing Check, 4, 900#, Bolted Bonnet, A216 WCB Body, 316SS Trim, Ring Type Joint Wedge Gate gat0303p1011rh Wedge Gate, 3, 300#, Pressure Seal, WCB, Cr13/HF, Raised Face, Hand Wheel Operated Globe glb0803b1011rh Globe, 8, 300#, Bolted Bonnet, WCB, Cr13/HF, Raised Face, Hand Wheel Operated Swing Check sck0601b1036r Swing Check, 6, 150#, Bolted Bonnet, WCB, 316SS Trim, Raised Face Lubricated Plug plg0803b1011rl Lubricated Plug Valve, 8, 300#, Bolted Bonnet, WCB, Cr13/HF Trim, Raised Face, Lever Operated Dual Seal Plug dsp0803b1011rg Dual Seal Plug, 8, 300#, bolted Bonnet, WCB, Cr13/HF Trim, Raised Face, Gear Operated Thru Conduit Gate tcg0603b1036rg Thru Conduit Gate, 6, 300#, Bolted Bonnet, WCB, 316SS Trim, Raised Face, Gear Operated Expanding Gate tcg0603b1036rg-exp Thru Conduit Gate, 6, 300#, Bolted Bonnet, WCB, 316SS Trim, Raised Face, Gear Operated, Expanding Rising Stem Ball rsb1006b1036rg Rising Stem Ball, 10, 600#, Bolted Bonnet, WCB Body, 316SS Trim, Raised Face, Gear Operated ii

6 Technical Data for Optional Seal & Seat Selections Optional Seal Selections Code Material Description B BUNA Also called Buna N or Nitrile, this sealing material is widely used because of its compatability with most hydraulic fluid media, including petroleum oils, water, water glycol, Di-Ester based fluids, air, and inactive gases. The temperature of this material ranges from -54C to +135C (-65F to +275F). N NEOPRENE This sealing material is excellent for refrigerants, amonia, and freon. Its temperature range is from -37C to +107C (-35F to +225F). E EPDM Also called Ethylene-Propylene, this sealing material is recommended for low pressure steam, hot water, phosphate ester base fluid, weak alkalines, and acids. This material is not recommended for petroleum service, hydrocarbons, alchohol, and radiation. Its temperature range is -54C to 149C (-65F to +250F). V VITON Also called Fluorocarbon Rubber (FKM), this material is known for being excellent in condition up to +204C (+400F). Viton offers excellent resistence to aggressive fuels and chemicals. T PTFE Teflon has excellent resistence to a wide range of chemicals. It is excellent at pressures below 1500 PSI. It can withstand temperatures up to +204C(+400F). R NBR NBR is typically resistant to mineral oil-based lubricants and greases, hydraulic fluids, hydrocarbons, and water. NBR is not resistant to polar solvents or chlorinated hydrocarbons. The material s temperature range is from -30C to +100C (-22F to +212F). H HNBR HNBR is simply hydrogenated NBR. It is typically resistant to mineral oil-based lubricants and greases, hydraulic fluids, hydrocarbons, and water just like NBR. HNBR is more resistent to heat, o-zone, and aging than NBR. The material s temperature range is from -30C to +100C (-22F to +212F). S SILICONE This material is capable of operating in a wide temperature range and has excellent resistence to o-zone, water, weathering, and aging. This material is generally not resistent to fuels, oils, steams, acids, or high pressures. This materials temperature range is from -65C to +250C (-85F to +482F). F FLUOROSILICONE This material is far more resistent to oils and fules than other silicones. The temperature range, however, is limited from -73C to +177C (-100F to +350F). G GRAPHOIL Grafoil is chemically resistant to attack from nearly all organic and inorganic fluids with exception of highly oxidizing chemicals and highly concentrated oxidizing mineral acids. The material is good up to +538C (+1000F) as well as at cryogenic temperatures. U FLUORSINT This material contains a mica filler and offers superb mechanical properties such as resistence to abrasion, wear, and extrusion. It is ideal for high pressure applications and offers low co-efficient of friction. Its temperature range is from -46C to +343C (-50F to +650F). Note: Additional options available upon request Optional Seat Selections Code Material Description D M-S M-Tc N O P T DEVLON METAL (Stellite) METAL (Tungsten Carbide) NYLON NOVA PEEK TEFLON (VIRGIN PTFE) Devlon is a polyamide with additives which allow it to perform at -46C to +121C (-50F to +250F). This material covers a wide range of applications while having excellent wear poperties, low friction, and improved impact strength. Metal seats hardfaced with Stellite 6 are recommended for use in high temperature fluid and gas applications. The temperature range of the material allows it to get up to the maximum temperature of the valve body material. Metal seats hardfaced with Tungsten Carbide are recommended for use in high temperature fluid and gas applications. The temperature range of the material allows it to get up to the maximum temperature of the valve body material. Nylon is offered for high pressure applications. The material is ideal for use in high pressure air, oil, and other gas media but is not suitable for strong oxidizing agents. The temperature range of this material is -34C to +121C (-29F to +250F). This Teflon based product is filled with glass amorphous carbon powder and graphite. It has a lower thermal contractionexpansion than PTFE and is ideal for steam or thermal fluid applications up to +288C (+550F). Peek offers a unique combination of chemical, mechanical, and thermal properties. This material is excellent for high temperatures up to +260C (+500F). PTFE is a fluorocarbon-based polymer. This material has excellent chemical resistance and co-efficient of friction. The material is not recommended for liquid alkalis and flourine. Its temperature range is good from -34C to +204C (-30F to +400F). K R PCTFE RPTFE Kel-F is a fluorocarbon based polymer offering a unique combination of physical and mechanical characteristics such as nonflamability, chemical resistance, and near zero moisture absorbtion. The temperature range of this material is from -240C to +204C (-400F to +400F). PTFE s mechanical properties are enhanced by adding a percentage of filler material to provide improved strength, stability, and wear resistance. The temperature range of this material is -46C to +232C (-50F to +450F). Note: Additional options available upon request iii

7 Seal & Seat Pressure Temperature Chart This chart depicts pressure and temperature ratings for common plastics and elastomers used in Southern California Valve products PSI Temp F PEEK VITON BUNA EPDM NYLON/DEVLON G-PTFE PTFE iv

8 Valve ID Tag & Valve Markings Identification Valve ID Tag ISO No. Figure Number Code Description 1 Serial Number Identifies certified manufacturers serial number 2 Figure Number Identifies the detailed valve configuration (valve type, bore size, pressure class, materials, etc.) 3 Size Identifies bore size 4 Pressure Class Identifies pressure classifications per API requirements 5 Body Material Identifies body metal material composition (A105, WCB, F51, CF8M, etc.) 6 Stem Material Identifies stem material composition (A105, 410SS, 17-4pH, etc.) 7 Ball/Disc Material Identifies ball/disc material composition (A105, 316SS, ENP, etc.) 8 Seat Material Identifies seat material composition (PEEK, Teflon, Nylon, etc.) 9 Manufacturing Date Identifies the date the valve manufacturing completion date 10 API Conformance Identifies API conformance (600, 6D, 6A, etc.) 11 Maximum Temperature F Identifies the maximum operating temperature in Fahrenheit 12 Max. Operating Pressure Identifies the maximum operating pressure in PSI. Valve Markings No. Valve ID Components 1 Tag 2 Brand 3 Size 4 Pressure Class 5 Body Material 6 Heat Number A105 B113H v

9 13903 Maryton Avenue Santa Fe Springs, CA Phone: Fax: MANUFACTURING FACILITY SCV SALES AND PROJECT OFFICE Friendswood, TX Phone: Fax: COMPANY PROFILE Southern California Valve was established in The primary focus of the Company was to provide full inline field service for valve maintenance as well as in house valve modifications. While serving the Power Industry, Paper & Pulp, Oil & Gas, and the Petro Chemical Industry; through years of dedication and commitment to quality and service, Southern California Valve has become one of the largest West Coast full range, field service companies, with a reputation for superior quality. In the mid 1970s, Southern California Valve entered the valve manufacturing industry, primarily serving the Power Industry. Since that time, Southern California Valve has expanded their products to cover a broad range of valves. Southern California Valve holds the API 6A & API 6D Monogram, API Q1 Quality Management System, and ASME R stamp. The Corporate office and manufacturing facility is located in Santa Fe Springs, California. The Sales and Projects office is located in Friendswood, Texas. The product lines include commodity valves as well as specialty valves in all Sizes & Pressure Classes & Metallurgy; including Carbon Steel, Stainless Steel & Exotic Alloys. The valve types include Gate, Globe, Swing Check - Bolted Bonnet & Pressure Seal Bonnet, Ball - both floating and trunnion, Thru-Conduit Gate - slab and expanding, Swing Check - Full Port, Plugs, Wafer Checks and Butterfly s. Before the SCV name is attached to any valve; Southern California Valve s High Quality Standards demands 100% pressure testing of every valve to insure its reliability. At Southern California Valve, we pride ourselves with high quality products in the commodity and specialty valve lines, as well as, timely deliveries, and competitive prices. Sincerely, Don Bullard, Jr./President 1 Note: SCV reserves the right to modify our products for improvement without prior notice.

10 Standard Wedge Gate Valves Carbon & Stainless Steel Sizes 2-52 Class Design and Manufacturing Standards Basic Design API 600 & ANSI B Shell Wall Thickness API 600 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 2

11 Carbon & Stainless Steel Wedge Gate Valves Class W CARBON & STAINLESS STEEL WEDGE GATE VALVES A3 L W A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A2I7-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 STEM A182-F60 A182-F60 A182 -F6a A182-F6a A182-F304 F316 F347 7 BONNET BUSH A A A A A F316 F347 8 PACKING GLAND A A A A A F316 F347 9 GLAND FLANGE A105 A] 05 A105 A105 A350 - LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C B147-B8 F316 F BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A GLAND BOLT A193-B7 A193-B7 A] 93-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-4 A194-2H A194-8 A HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A HINGE PIN A A A A A F316 F PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 24 LANTERN A A A A A F316 F YOKE A216-WCB 216-WC6 216-WC9 A216-C5 A352-LC1/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A BEARING COMMERCIAL 3

12 CARBON & STAINLESS STEEL WEDGE GATE VALVES CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE in mm A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in S mm in mm Ib kg Ib kg

13 CARBON & STAINLESS STEEL GATE VALVES CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg

14 CARBON & STAINLESS STEEL GATE VALVES CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib Kg CLASS CARBON & STAINLESS STEEL WEDGE gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm In mm in mm In mm in mm in mm in mm lb kg lb kg

15 Pressure Seal Gate Valves Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design ANSI B Face to Face Dimension ANSI B16.10 End Flanges Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 598 7

16 Carbon & Stainless Steel Pressure Seal Gate Valves Class CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES L W W A2 (RTJ) 1 4 Bill of material NO NAME OF PART 3 ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A 105+ HARD FACE A182-F11 A182-F22 A182-F50 A182-F304 F316 F347 5 STEM A182-F6d A182-F60 A182-F6Q A182-F6Q A182-F304 F316 F347 8 PACKING GLAND A A A A A F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A350 - LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C B147-B8 F316 F BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 26 YOKE A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A BEARING COMMERCIAL 32 PACKING WASHER A A A A A F316 F RETA1NER A A A A A F316 F HINGE CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 35 BONNET CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 37 GASKET SPACER A A A A A F316 F347 A3 A1 8

17 CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES CLASS CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm In mm in mm in mm in mm lb kg lb kg CLASS CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib Kg

18 CARBON & STAINLESS STEEL PRESSURE SEAL GATE VALVES CLASS CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL pressure seal gate valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm lb kg lb kg

19 Thru Conduit Slab & Expanding Gate Valves Cast Steel Sizes 2-36 Class Design and Manufacturing Standards Basic Design API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 11

20 Thru Conduit Slab & Expanding Gate Valves Class THRU CONDUIT SLAB GATE VALVES 2-36 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES 35 Bill of Materials No. Part Material 1 Body ASTM A216 WCC 2 Body Drain Port - 3 Body Drain Plug Slab Disc ASTM A105+ENP 5 Seat ASTM A105+ENP+Nylon 6 Sealant Injector Port - 7 Sealant Injector Fitting Seat Spring Inconel x Seat O-Ring Viton 10 Back Seat ASTM A182 F6A+Viton 11 Stem ASTM 182 F6A 12 Bonnet Gasket Stud Bolt ASTM A193 B7M 14 Nut ASTM A194 2HM 15 Bonnet ASTM A216 WCC 16 Bonnet Vent Port - 17 Bonnet Vent Plug Packing Seat Packing Rings PTFE 20 Lantern Ring Packing Injector Port - 22 Packing Injector Fitting Packing Rings PTFE 24 UP Packing Graphite Packing Graphite 26 Stud Bolt ASTM A193 B7M 27 Nut ASTM A194 2HM 28 Yoke ASTM A216 WCC 29 Stem Nut Bronze 30 Bearings Steel 31 Stem Nut Retainer Handwheel Steel 33 Handwheel Nut Steel 34 Stem Protector Steel 35 Stem Indicator Stainless Steel 12

21 Slab Gate Advanced Mechanical Details CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Features Overview Through its simple design and efficient performance, the slab gate s two spring loaded floating seats are pressure energized. This allows for complete sealing, both upstream and downstream. Figure 1 Slab Seats Soft & Metal The spring loaded double O-ring design seats maintain a perfect seal with the gate in both low and high pressure applications. The soft seat inserts help to ensure that the primary sealing occurs at the gate. In the event of soft seat damage, the seating of metal to metal will function as a secondary seal. (Figure 1) Figure 2 Slab Metal-to-metal Contact Seat Ring Double Block When the valve is in the closed position and also has equal or no pressure, both spring loaded seats can shut off line pressure independently of upstream and downstream pressure. This creates a double block scenario. (Figure 2) When line pressure is applied, the pressure forces the slab gate to float against the downstream seat and form a tight seal. At the same time, the upstream line pressure forces the upstream seat on the slab gate to form an upstream seal. (Figure 3) Figure 3 Seat O-ring Slab Body Spring Seat Insert Seat Ring Self Relieving Cavity The double block and bleed slab gate design, in the closed position, may experience an increase in cavity pressure due to thermal expansion. When the cavity pressure exceeds the line pressure, the seat is forced away from the gate surface allowing the excess cavity pressure to be vented into the line. This allows for a pressure balance between the body cavity and the line. (Figure 4) Seat O-ring Body Spring Seat Insert Secondary Sealant Injection System Valves 6 and larger will have secondary sealant injection fittings for the stem and seats. If the seat inserts or stem O-rings become damaged, leakage from the seat and stem can be prevented by injecting sealant into the fittings. (Figure 5) Packing Bonnet Figure 4 Slab Stem Injection Seat Insert Line Pressure Stem Lantern Ring Seat Ring Gate Packing Cavity Pressure Seat O-ring Seat Injection Body 13

22 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Thru Conduit Slab & Expanding Gate Valves Class THRU CONDUIT EXPANDING GATE VALVES Bill of Materials No. Part Material 1 Body ASTM A216 WCC 2 Body Drain Port - 3 Body Drain Plug Expanding Disc Gate ASTM A105+ENP 5 Expanding Disc Segment ASTM A105+ENP 6 Seat ASTM A105+ENP+Nylon 7 Sealant Injector Port - 8 Sealant Injector Fitting O-Ring Viton 10 Back Seat ASTM A182 F6A+Viton 11 Stem ASTM 182 F6A 12 Bonnet Gasket Stud Bolt ASTM A193 B7M 14 Nut ASTM A194 2HM 15 Bonnet ASTM A216 WCC 16 Bonnet Vent Port - 17 Bonnet Vent Plug Packing Seat Packing Rings PTFE 20 Lantern Ring Packing Injector Port - 22 Packing Injector Fitting Packing Rings PTFE 24 UP Packing Graphite Packing Graphite 26 Stud Bolt ASTM A193 B7M 27 Nut ASTM A194 2HM 28 Yoke ASTM A216 WCC 29 Stem Nut Bronze 30 Bearings Steel 31 Stem Nut Retainer Handwheel Steel 33 Handwheel Nut Steel 34 Stem Protector Steel 35 Stem Indicator Stainless Steel 14

23 Expanding Gate Advanced Mechanical Details CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Features Overview The SCV Expanding Gate valve design provides a mechanical seal between the seats and the gate in both high and low pressure applications. The expanding gate valve does not require line pressure to seal and is recommended when a tight mechanical seal is required. Figure 1 Seat Rings Sealant Injector Fitting Disc Segment Stop Full Expanded Closed In the full expanded closed position, the segment stop has engaged with the lower body stop and the gate is wedged downward, expanding the gate and segment to form a tight seal against the upstream and downstream seats. Body cavity venting will assist to provide tight shut off. (Figure 1) Mid Position When operating towards the open position, the gate travels across the wedge angle of the segment. This retracts the assembly so that is will slide freely between the seat faces. (Figure 2) Disc Gate Disc Segment Full Expanded Open In the full expanded open position, the segment stop has engaged the upper body stop and the gate is wedged upward. This expands the segment and the gate into the seats, isolating the flow from the cavity. (Figure 3) Figure 2 Figure 3 15

24 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS (Expanding gate valve dimensions are upon request.) END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

25 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

26 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

27 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

28 CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES HW G2 GW G H H1 L L1 L2 CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM CLASS CAST STEEL thru conduit SLAB & expanding gate valves DIMENSIONS & WEIGHTS END-TO-END CENTER-TO-BOTTOM HANDWHEEL OPERATED GEAR OPERATED RF - L BW - L1 RTJ - L2 H1 H HW G G2 GW WEIGHTS LBS/KG IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

29 Cv Values CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES The flow co-efficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve x x x x x Optional Thermal Relief Modifications With the expanding gate design, it is possible for Thermal Expansion to occur within the body cavity while the valve is in the closed position. A Thermal Relief system is available to allow the body cavity to relieve into the upstream side of the valve. Sample Thermal Relief Configuration 21 SCV installed Thermal Relief system on 16 Class 600 Thru Conduit Gate Valve SCV installed Thermal Relief system on 4 Class 600 Thru Conduit Gate Valves

30 Operating Torques Operating torques and thrusts are based on maximum differential. CAST STEEL THRU CONDUIT SLAB & EXPANDING GATE VALVES Slab Gate Expanding Gate CLASS OPERATING THRUST LBS OPERATING TORQUE FT. LBS TRAVEL IN. MM. TURNS CLASS OPERATING THRUST LBS OPERATING TORQUE FT. LBS TRAVEL IN. MM. TURNS

31 Standard Globe Valves Carbon & Stainless Steel Sizes 2-18 Class Design and Manufacturing Standards Basic Design API 600 & ANSI B Shell Wall Thickness API 600 Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API

32 Carbon & Stainless Steel Globe Valves Class W CARBON & STAINLESS STEEL GLOBE VALVES L W A A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 STEM A182-F60 A182-F6a A182-F60 A182-F6Q A182-F304 F316 F347 6 DISC GLAND A217-CA15 A217-CA15 A217-CA15 A217-CA15 A182-F304 F316 F347 7 BONNET BUSH A A A A A F316 F347 8 PACKING GLAND A A A A A F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A360-LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439 - D2C B147-B8 F316 F BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 15 HANDLE NUT STEEL 16 SET SCREW STEEL 17 SLEEVE GLAND STEEL 19 HANDWHEEL A GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A HINGE PIN A A A A A F316 F PACKING COMMERCIAL 22 GASKET COMMERCIAL 23 GREASE NIPPLE STEEL BRONZE BRONZE 24 LANTERN A A A A A F316 F BEARING COMMERCIAL 30 STOPPER A283-D 31 KEY STEEL 45 WASHER STEEL 48 IMPACT A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 24

33 CARBON & STAINLESS STEEL GLOBE VALVES CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm W in mm 20) in mm lb kg lb kg CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib Kg Ib Kg

34 CARBON & STAINLESS STEEL GLOBE VALVES CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mrn in mm in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mrn in mm in mm in mm in mm in mm in mm Ib kg Ib kg

35 CARBON & STAINLESS STEEL GLOBE VALVES CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg lb kg CLASS CARBON & STAINLESS STEEL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg

36 Pressure Seal Globe Valves Carbon & Stainless Steel Sizes 2-16 Class Design and Manufacturing Standards Basic Design ANSI B Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API

37 Carbon & Stainless Steel Pressure Seal Globe Valves Class & 31 CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES W L W A A2 (RTJ) A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BONNET A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 5 STEM A182-F6Q A182-F60 A182-F60 A182-F60 A182-F304 F316 F347 6 DISC GLAND A217-CA15 A217-CA15 A217-CA15 A217-CA15 A182-F304 F316 F347 8 PACKING GLAND A A A A A F316 F347 9 GLAND FLANGE A105 A105 A105 A105 A360-LF2 CF8M CF8C 10 YOKE SLEEVE A439-D2C A439-D2C A439-D2C A439-D2C A147-B8 F316 F BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 13 GLAND BOLT A193-B7 A193-B7 A193-B7 A193-B7 A320-L7 A193-B8 A193-B8 14 GLAND NUT A194-2H A194-2H A194-2H A194-2H A194-4 A194-8 A HANDLE NUT STEEL 16 SET SCREW STEEL 19 HANDWHEEL A PACKING COMMERCIAL 22 GASKET COMMERCIAL 26 YOKE A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 27 YOKE BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 28 YOKE NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A STOPPER A283-D 31 STOPPER PIN A A A A A F316 F PACKING WASHER A A A A A F316 F RETAINER A A A A A F316 F HINGE CLAMP A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 35 BONNET CLAMP A216-WCB A216-WC6 A216-WC9 A216-C5 A352-LCB/LC2/LC3 CF8M CF8C 37 GASKET SPACER A A A A A F316 F347 29

38 CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES CLASS CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg

39 CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE VALVES CLASS CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm lb kg lb kg CLASS CARBON & STAINLESS STEEL PRESSURE SEAL GLOBE valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) W L in mm in mm in mm in mm in mm in mm in mm Ib kg Ib kg

40 Standard Check Valves Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design ANSI B16.34 Shell Wall Thickness API Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API

41 CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES Carbon & Stainless Steel Standard Check Valves Class A2 (RTJ) 7 A A1 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING Al 05 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 5 HINGE PIN A A A A A F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 8 DISC NUT AISI 304 F316 F347 9 DISC WASHER AISI 304 F316 F BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A EYE BOLT A105 SS SS 20 SPLIT PIN AISI 304 F316 F PLUG GASKET COMMERCIAL 22 GASKET COMMERCIAL 24 PLUG A105 F316 F316 33

42 CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg

43 CARBON & STAINLESS STEEL STANDARD SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib , kg CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL standard SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg

44 Full Port Check Valves Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design API 6D & ANSI B16.34 Shell Wall Thickness API 6D Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 (2 to 24 ) MSS SP-44 (26 & up) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 36

45 Carbon & Stainless Steel Full Port Check Valves Class CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES A A2 (RTJ) A3 Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 BODY SEAT RING Al 05 + HARD FACE A182-F11 A182-F22 A182-F5a A182-F304 F316 F347 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 DISC WASHER AISI 304 F316 F347 5 DISC NUT AISI 304 F316 F347 6 DISC PIN AISI 304 F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 8 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 9 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A BONNET GASKET COMMERCIAL 11 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 12 EYE BOLT A105 SS SS 13 HINGE PIN A A A A A F316 F GASKET COMMERCIAL 15 PLUG A105 F316 F316 37

46 CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A3 in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg

47 CARBON & STAINLESS STEEL FULL PORT SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib , kg CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL FUll port SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg Ib kg

48 Pressure Seal Swing & Tilting Disc Check Valves Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design ANSI B Face to Face Dimension ANSI B16.10 Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API

49 Cast & Stainless Pressure Seal Swing Check Valves Class CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES A2 (RTJ) A Bill of material NO NAME OF PART ASTM SPECIFICATION CARBON STEEL HIGH TEMPERATURE SERVICE LOW TEMPERATURE SERVICE STAINLESS STEEL 1 BODY A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 2 COVER A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC B/LC2/LC3 CF8M CF8C 3 DISC A217-CA15 A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 4 BODY SEAT RING A105 + HARD FACE A182-F11 A182-F22 A182-F5Q A182-F304 F316 F347 5 HINGE PIN A A A A A F316 F347 7 ARM A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LC1/LC2/LC3 CF8M CF8C 8 SET BOLT AISI 304 A193-B8 A193-B8 9 DISC COVER AISI 304 CF8M CF8C 11 BONNET BOLT A193-B7 A193-B16 A193-B16 A193-B16 A320-L7 A193-B8 A193-B8 12 BONNET NUT A194-2H A194-4 A194-4 A194-4 A194-4 A194-8 A EYE BOLT A105 SS SS 21 PLUG GASKET COMMERCIAL 22 GASKET COMMERCIAL 25 PLUG A194-2H A194-2H A194-2H A194-2H A194-4 F316 F RETAINER A A A A A F316 F BONNET CLAMP A216-WCB A217-WC6 A217-WC9 A217-C5 A352-LCB/LC2/LC3 CF8M CF8C 37 GASKET SPACER A A A A A F316 F347 A1 41

50 CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 (RTJ) A3 in mm in mm in mm in mm in mm Ib kg lb kg CLASS CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in mm in mm in mm in mm in mm b kg Ib kg

51 CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK VALVES CLASS CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in mm in mm in mm in mm in mm Ib kg Ib kg CLASS CARBON & STAINLESS STEEL PRESSURE SEAL SWING CHECK valves DIMENSIONS & WEIGHTS VALVE A1 A2 A3 (RTJ) in mm in mm in mm in mm in mm Ib kg Ib kg

52 Piston Check Valves Cast Steel Sizes 1-24 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness ANSI B16.34 Face to Face Dimension As stated Flange End Dimension ANSI B16.5 Inspection & Testing API 6D 44

53 Cast Steel Piston Check Valves Class CAST STEEL PISTON CHECK VALVES H1 A2 (RTJ) A1 45

54 Bill of material CAST STEEL PISTON CHECK VALVES NO NAME OF PART MATERIAL 1 BODY CAST CARBON STEEL, ASTM A-216 WCB CAST ALLOY STEEL, ASTM A-487-N 2 COVER FORGED STEEL, ASTM A-105-GR. 1 FORGED STEEL, ASTM A-105-GR. 2 3 PISTON 11-13% CHROME ALLOY (165 BRINELL HARDNESS) 4 SEAT 11-13% CHROME ALLOY (250 BRINELL HARDNESS) 5 LINER ALLOY IRON (HARD CHROME LINED) 6 PISTON RINGS CAST IRON (CHEMICALLY TREATED) *7 CHECK VALVE (with ball) STAINLESS STEEL WITH CHROME-STEEL BALL *8 ORIFICE PLUG.25 STAINLESS STEEL 9 STUDS ASTM A-193-GR HEX NUTS ASTM A-194-GR 2 11 BODY - COVER - LINER GASKET GRAPHITE ASBESTOS *12 BLEEDER PLUG.25 NPT STEEL (CHEMICALLY TREATED) 13 DRAIN PLUG.25 NPT STEEL 14 API RING GASKET SOFT IRON 15 SEAT LOCKING PIN STAINLESS STEEL 16 IDENTIFICATION PLATE CAST ALUMINUM *17 LIFTING EYE BOLTS STEEL * Indicates parts interchangeable in all sizes. Note: Available in other materials upon request. 46

55 CAST STEEL PISTON CHECK VALVES CLASS CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in mm in mm in mm in mm in mm lb kg CLASS CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in mm in mm in mm in mm in mm lb kg CLASS CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in mm in mm in mm in mm in mm lb kg

56 CAST STEEL PISTON CHECK VALVES CLASS CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in mm in mm in mm in mm in mm lb kg CLASS CAST steel Piston CHECK valves DIMENSIONS & WEIGHTS A1 A2 (RTJ) H1 in mm in mm in mm in mm in mm lb kg

57 Dual Plate Check Valves - Wafer & Flanged Carbon & Stainless Steel Wafer Sizes Class 150 thru 2500 Flanged Sizes 8-48 Class Design and Manufacturing Standards Basic Design API 6D & API 594 Face to Face Dimension API 6D & ANSI B16.10 Flange End Dimension ANSI B16.5 Inspection & Testing API

58 Wafer - Dual Plate Check Valves Class E 1 C 5 WAFER - DUAL PLATE CHECK VALVES A 4 B Bill of material NO NAME OF PART MATERIAL 1 BODY A216-WCB A351-CF8M 2 DISC A217-CA15 A351-CF8M 3 SPRING INCONEL X750 INCONEL X750 4 SEAT 410 SS STELLITE 6 5 HINGE PIN 410 SS 316 SS 6 STOP 410 SS 316 SS DIMENSIONS & WEIGHTS VALVE 1.5 (38 mm) 2 (51 mm) 2.5 (64 mm) 3 (76 mm) 4 (102 mm) PRESSURE RATING END FACING A B C E STUD SELECTION APPROX WT NO DIA LENGTH LB KG 150 RF RF/RJ RF/RJ RF RF/RJ RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ

59 WAFER - DUAL PLATE CHECK VALVES VALVE 5 (127 mm) 6 (152 mm) 8 (203 mm) 10 (254 mm) 12 (305 mm) 14 (356 mm) 16 (406 mm) 18 (457 mm) 20 (508 mm) 24 (610 mm) PRESSURE END STUD SELECTION APPROX WT A B C E RATING FACING NO DIA LENGTH LB KG 150 RF RF RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF/RJ RF RF RF/RJ RJ/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF/RJ

60 WAFER - DUAL PLATE CHECK VALVES VALVE 26 (660 mm) 28 (711 mm) 30 (762 mm) 32 (813 mm) 36 (914 mm) 40 (1016 mm) 42 (1067 mm) 48 (1219 mm) 54 (1372 mm) 60 (1524 mm) 66 (1676 mm) 72 (1829 mm) 78 (1981 mm) 84 (2134 mm) PRESSURE END STUD SELECTION APPROX WT A B C E RATING FACING NO DIA LENGTH LB KG 150 RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF/RJ RF/RJ RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF RF

61 Flanged - Dual Plate Check Valves Class FLANGED - DUAL PLATE CHECK VALVES 1 5 E C A 4 B Bill of material NO NAME OF PART MATERIAL 1 BODY A216-WCB A351-CF8M 2 DISC A217-CA15 A351-CF8M 3 SPRING INCONEL X750 INCONEL X750 4 SEAT 410 SS STELLITE 6 5 HINGE PIN 410 SS 316 SS 6 STOP 410 SS 316 SS DIMENSIONS & WEIGHTS VALVE 8 (203 mm) 10 (254 mm) 12 (305 mm) 14 (356 mm) 16 (406 mm) 18 (457 mm) PRESSURE RATING A B C E STUD SELECTION APPROX WEIGHT NO. DIAMETER LENGTH LB KG

62 FLANGED - DUAL PLATE CHECK VALVES VALVE 20 (508 mm) 24 (610 mm) 26 (660 mm) 28 (711 mm) 30 (762 mm) 32 (813 mm) 36 (914 mm) 40 (1016 mm) 42 (1067 mm) 48 (1219 mm) PRESSURE STUD SELECTION APPROX WEIGHT A B C E RATING NO. DIAMETER LENGTH LB KG t t t t

63 Gate Valves Forged Steel Sizes 3/8-2 Class Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B Inspection & Testing API

64 Forged Steel Gate Valves Class 800 3/8-2 L 1 FORGED STEEL GATE VALVES L1 D2 D1 Socket Weld Ends D Bill of material NO NAME OF PART MATERIAL 1 LOCK NUT CARBON STEEL AISI HANDWHEEL MALLEABLE IRON 3 WASHER ASTM A STEM NUT ASTM A EYE BOLT ASTM A EYE BOLT NUT ASTM A194 2H 7 GLAND FLANGE ASTM A216 WCB 8 PACKING GLAND ASTM A EYE BOLT PIN ASTM A PACKING GRAPHITE 11 BOLT ASTM A193 B7 12 BONNET ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F GASKET GRAPHITE 14 STEM ASTM A WEDGE ASTM A SEAT RING ASTM A HF 17 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE D D1 D2 - in VALVE in mm mm in in A mm mm in in mm mm in in L mm mm in L mm A 56

65 Globe Valves Forged Steel Sizes 3/8-2 Class Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B Inspection & Testing API

66 Forged Steel Globe Valves Class 800 3/8-2 L 2 3 FORGED STEEL GLOBE VALVES 1 4 D2 D L1 Socket Weld Ends D 17 Bill of material NO NAME OF PART MATERIAL 1 LOCK NUT CARBON STEEL AISI HANDWHEEL MALLEABLE IRON 3 WASHER CARBON STEEL AISI STEM NUT ASTM A EYE BOLT ASTM A EYE BOLT NUT ASTM A194 2H 7 GLAND FLANGE ASTM A216 WCB 8 PACKING GLAND ASTM A EYE BOLT PIN ASTM A PACKING GRAPHITE 11 BOLT ASTM A193 B7 12 BONNET ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F GASKET GRAPHITE 14 STEM ASTM A DISC ASTM A SEAT INTEGRAL+HF 17 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE in VALVE in mm mm D in in A mm mm D1 in in mm mm D2 in in L mm mm in L mm A 58

67 Piston Check Valves Forged Steel Sizes 3/8 thru 2 Class Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B Inspection & Testing API

68 Forged Steel Piston Check Valves Class 800 3/8-2 FORGED STEEL PISTON CHECK VALVES D 5 6 A D2 D1 Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193 B7 2 COVER ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 3 GASKET GRAPHITE 4 DISC ASTM A SEAT INTEGRAL+HF 6 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 DIMENSIONS OF SOCKET WELD ENDS VALVE D D1 D2 in VALVE in mm mm in in L1 mm mm in in A mm mm in in mm mm L1 Socket Weld Ends 60

69 Swing Check Valves Forged Steel Sizes 3/8 thru 2 Class Design and Manufacturing Standards Basic Design API 602 & ANSI B16.34 Socket Weld End Dimension ANSI B16.11 Thread End Dimension ANSI B Inspection & Testing API

70 Forged Steel Swing Check Valves Class 800 3/8-2 FORGED STEEL SWING CHECK VALVES 1 H A D D2 D1 L1 Socket Weld Ends Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193 B7 2 COVER ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 3 GASKET GRAPHITE 4 BODY ASTM A105 - Also available in F5, F11, F304, F316, F51, F53, F347, and F321 5 SUPPORTER AISI HINGE PIN ASTM A HINGE ASTM A217 CA15 8 SEAT RING ASTM A HF 9 DISC ASTM A743 CA40 DIMENSIONS OF SOCKET WELD ENDS VALVE DIMENSIONS in VALVE in mm mm D in L1 in mm mm D1 in A in mm mm D2 in in mm mm

71 Pressure Balance Lubricated Plug Valves Cast Steel Sizes 1/2-24 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 63

72 Pressure Balance Lubricated Plug Valves Class / PRESSURE BALANCED LUBRICATED PLUG VALVES Bill of material NO NAME OF PART MATERIAL 1 BOLT ASTM A193-B7, A193-B8, A193-B8M 2 NUT ASTM A194-2H, A194-8, A194-8M 3 COVER ASTM A216-WCB, WCC, C5, A351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 4 GASKET FLEXIBLE GRAPHITE, STAINLESS STEEL, PTFE 5 PLUG ASTM A182-GR. F6A, ASTM A182-F22, ASTM A-351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 6 BODY ASTM A216-WCB, WCC, C5, A351-CF8, CF8M, CF3, CF3M, CF8C, Duplex 7 STEM ASTM A182-GR. F6A, ASTM A182-F22, ASTM A182-F304, F316, F321, F304L, F31 6L, O-RING NBR 9 PACKING FLEXIBLE GRAPHITE, PTFE 10 GLAND Cast 11 OIL NOZZLE Plated 12 CHECK VALVE SS 13 WRENCH ASTM A , A216 WCB L-RF L-BW CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in mm A-BW in mm Ib kg CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in mm A-BW in mm Ib kg

73 PRESSURE BALANCED LUBRICATED PLUG VALVES A-RF A-BW CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in A-BW mm Ib kg CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in A-BW mm Ib kg CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in A-BW mm Ib kg CLASS pressure balanced lubricated plug valves DIMENSIONS & WEIGHTS in mm A-RF in A-BW mm Ib kg

74 Dual Seal Expanding Plug Valves Cast Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D 66

75 Dual Seal Expanding Plug Valves Class DUAL SEAL EXPANDING PLUG VALVES W H A Bill of material NO NAME OF PART ASTM NO NAME OF PART ASTM 1 BODY A216-WCB 11 UP COVER A216-WCB 2 BONNET A216-WCB 12 STEM A182 F6a 3 BUSHING SEAL RING A182 F6a 4 O-RING FPM 14 PACKING 304+GRAPHITE 5 GASKET 304+GRAPHITE 15 PACKING GLAND A216-WCB 6 STUD BOLT A193 B7 16 YOKE A216-WCB 7 NUT A184 2H 17 BUSHING A FPM 8 PLUG A216-WCB 18 GUIDE PIN 17-4 PH 9 SLIP A FPM 19 HANDWHEEL DUCTILE IRON 10 SLIP SEAL VITON

76 DUAL SEAL EXPANDING PLUG VALVES CLASS DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE A H1 W 1 2 in mm in mm in mm in mm in mm Ib kg in mm in mm CLASS DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE A H1 W 1 2 in mm in mm in mm in mm in mm Ib kg in mm in mm

77 DUAL SEAL EXPANDING PLUG VALVES CLASS DUAL SEAL Expanding plug valves DIMENSIONS & WEIGHTS VALVE in mm A in mm H1 in mm in mm W in mm Ib kg in mm in mm CLASS DUAL SEAL EXPANDING plug valves DIMENSIONS & WEIGHTS VALVE in mm A in mm H1 in mm in mm W in mm Ib kg in mm in mm

78 3-Piece Full Port Ball Valves Carbon & Stainless Steel Sizes.25-3 Class 2000 W.O.G Design and Manufacturing Standards Basic Design ANSI B 16.34S EN Thread End Dimension ANSI B Socket Weld End Dimension ANSI B16.11 Inspection & Testing API

79 3-Piece Full Port Ball Valves CARBON & STAINLESS STEEL 3-PIECE FULL PORT BALL VALVES 2000 W.O.G. Threaded Ends (ISO 5211 mounting pad), socket weld ends (ansi b 16.11), & butt weld ends (ansi 16.25) 1/4 thru 2 : 2000 psi W.O.G. 2-1/2 thru 3 : 1500 psi W.O.G. M I X E K J W 37.5 Socket Weld 2 5 D F features 3-piece design for fast, economical in-line maintenance Reinforced TFE seats increase durability Strengthened construction secures 2000 psi rating Bottom-loaded blow-out proof stem Mounting pad complies with ISO 5211 for actuation ease and interchangeability Re, Rp & G Threaded ends comply with BS 21/2779, JIS B-0203/ 0202, DIN259/2999, ISO 228-1, AS / are upon request NPT threaded ends complied with ANSI B Basic design complied with ANSI B16.34 & EN Tested according to API 598 Bill of material A-SW & A-BW NO NAME OF PART STAINLESS STEEL CARBON STEEL 1 BODY ASTMA351-CF8M ASTMA216-WCB 2 END CAP ASTMA351-CF8M ASTMA216-WCB 3 BALL ASTMA351-CF8M/316 ASTMA351-CF8/304 4 SEAT REINFORCED TFE REINFORCED TFE 5 O-RING PTFE PTFE 6 STEM BUSHING PTFE PTFE 7 STEM PACKING PTFE PTFE 8 PACKING GLAND AISI304 AISI304 9 STEM ASTMA ASTMA HANDLE WASHER AIS1304 AISI STEM NUT AISI304 AISI BONNET NUT AISI304/GR. B8 CARBON STEEL/GR.B7 13 WASHER AISI304/GR. 8 CARBON STEEL/ GR.2H 14 BODY STUD AISI304 CARBON STEEL 15 HANDLE AISI304 ZINC PLATED STEEL 16 HANDLE COVER PVC PVC 17 STOP SCREW AIS1304 CARBON STEEL Butt Weld 71

80 CARBON & STAINLESS STEEL 3-PIECE FULL PORT BALL VALVES 3-piece full port ball valves DIMENSIONS VALVE D A-SW A-BW E F I J K G 2000 PSI 1500 PSI in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm mm M5 M5 M5 M5 M5 M5 M6 M6 M8 M8 M W X in mm in mm in mm

81 2-Piece Flanged Floating Ball Valves Full & Reduced Port Carbon & Stainless Steel Sizes 1/2-10 Class Design and Manufacturing Standards Basic Design ANSI B Face to Face Dimension ANSI B Flange End Dimension ANSI B 16.5 Inspection & Testing API 598 Fire Safe Design API 6FA/BS

82 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves - Full & Reduced Port Class

83 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves - Full & Reduced Port Class Bill of Materials No Name of Part Stainless Steel Carbon Steel 1 Body End Cap ASTM A351-CF8M ASTM A216-WCB 2 Nut AISI/ASME 304/GR.8 Carbon Steel/GR.2H 3 Body Joint Bolt AISI/ASME 304/GR.B8 Carbon Steel/GR.B7 4 Body Gasket PTFE PTFE 5 Ball ASTM A351-CF8M/316 ASTM A351-CF8M/316 6 Seat PTFE PTFE 7 Body ASTM A351-CF8M ASTM A216-WCB 8 Stem ASTM A ASTM A Stem Thrustwasher PTFE PTFE 10 Stem Packing PTFE PTFE 11 Gland Flange ASTM A351-CF8 ASTM A351-CF8 12 Handle Stop AISI/ASME 304 AISI/ASME Snapring AISI/ASME 420 AISI/ASME Handle Carbon Steel Carbon Steel 15 Gland Bolt AISI/ASME 304 AISI/ASME Washer AISI/ASME 304 AISI/ASME Cap Screw AISI/ASME 304 AISI/ASME Anti-static Device 316SS 316SS Note: Additional materials available upon request Features Split body design with flanged ends for fast installation, in-line maintenance and rebuilding Solid ball construction provides structural integrity and minimizes flow turbulence Mounting pad complies with ISO 5211 for ease and interchangeability of actuation Bottom-loaded blow-out proof stem Investment cast body & end cap on sizes 1/2 to 4. Sand cast body & end cap on sizes 5 to 10 Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque Basic design complies with ASME/ANSI B16.34 Flanged ends comply with ASME/ANSI B16.5 Face-to-face dimensions comply with ASME/ANSI B16.10 Tested according to ANSI/ASME B16.34 & API

84 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5* MM IN.75* MM IN 1* MM IN 1.5* MM IN 2* MM IN 2.5* MM IN 3* MM IN 4* MM IN 6* MM IN MM IN MM

85 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 2 x 1* MM IN 3 x 2* MM IN 4 x 3* MM IN 6 x 4* MM IN 8 x MM IN 10 x MM

86 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5* MM IN.75* MM IN 1* MM IN 1.5* MM IN 2* MM IN 2.5* MM IN 3* MM IN 4* MM IN MM IN MM IN MM

87 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 2 x 1* MM IN 3 x 2* MM IN 4 x 3* MM IN 6 x 4* MM IN 8 x MM IN 10 x MM

88 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF CLASS piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED FACE OD BOLT CIRCLE DIAMETER FLANGE OD CENTER - TO - TOP LEVER LENGTH D A - RF R C B W WEIGHTS LBS/KG IN.5* / MM / IN.75* / MM / IN 1* / MM / IN 1.5* / MM / IN 2* MM IN 3* MM IN 4* MM IN MM

89 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W d D R C B A - RF CLASS piece flanged floating ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - RAISED BOLT CIRCLE FLANGE CENTER - LEVER END FACE OD DIAMETER OD TO - TOP LENGTH D d A - RF R C B W WEIGHTS LBS/KG IN 3 x 2* MM IN 4 x 3* MM IN 6 x MM

90 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT W D R C B A - RF A - RTJ CLASS piece flanged floating ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END - TO - END RAISED BOLT CIRCLE FLANGE CENTER - LEVER FACE OD DIAMETER OD TO - TOP LENGTH D A - RF A - RTJ R C B W WEIGHTS LBS/KG IN.5* / MM / IN.75* / MM / IN 1* / MM / IN 1.5* / MM / IN 2* MM

91 CARBON & STAINLESS STEEL 2-PIECE FLANGED FLOATING BALL VALVES - FULL & REDUCED PORT 2-Piece Flanged Floating Ball Valves Full & Reduced Port Flow Coefficients Cv Values and Opening Torques for Soft Seats Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port / / / / / / / / / / / / / / / / Opening Torques for Soft Seats The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size ISO Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port / 26 F03/F / / 74 F05/F / / 199 F / / / 4 F10/F / / 8 F / / / 10 F / / / Notes 1 Torques may change with different mediums and trim materials. 2 All valves are at normal temperature with PTFE seats for Class 150 and 300 lbs. Nylon seats for class 600 through All torques are at maximum differential. Safety factor not included. 83

92 2-Piece Trunnion Mounted Ball Valves Full & Reduced Port Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI/ASME B16.5 (2 to 24 ) Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS

93 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves - Full & Reduced Port Class

94 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves - Full & Reduced Port Class Bill of Materials No Name of Part Materials 1 Body ASTM A216, WCB ASTM A351, CF8M ASTM A352, LCC 2 Vent Carbon Steel Stainless Steel 3 Ball ASTM A105, ENP ASTM A182 F316, Seat O-ring NBR/Viton 5 Seat Ring ASTM A105, ENP ASTM A182 F316, Seat Insert PTFE, Nylon 7 Seat Spring Inconel X Flange Adapter Stainless Steel 9 T-bar Cap Stainless Steel 10 T-bar Bolt Stainless Steel 11 T-bar Washer Carbon Steel 12 T-bar Carbon Steel Stainless Steel 13 Gland Flange ASTM A105 ASTM A182 F316, Gland Gasket 304SS + Graphite 316SS + Graphite 15 Stem ASTM A105 ENP ASTM A182 F316, Stem Bushing ASTM A105 ENP ASTM A182 F316, Key ASTM A105 ASTM A182 F316, Stem O-ring NBR/Viton 19 Lever Carbon Steel 20 Fire Gasket 304SS + Graphite 316SS + Graphite 21 Body O-ring NBR, Viton 22 Body Nut ASTM A194 2H ASTM A194 8 ASTM A194 7M 23 Body Stud ASTM A193 B7 ASTM A193 B8 ASTM A320 L7M 24 Drain Carbon Steel Stainless Steel 25 Trunnion ASTM A105 ENP ASTM A182 F316, 410 ASTM A350-LF2 ENP 26 Trunnion Gasket 304SS + Graphite 27 Trunnion Bushing ASTM A105 ENP ASTM A182 F316, 410 ASTM A350-LF2 ENP 28 Trunnion O-ring NBR, Viton 29 Trunnion Plate Carbon Steel 30 Hex Head Screw Carbon Steel Stainless Steel 31 Snapring Flexible Graphite 32 Stop Plate Carbon Steel 33 Stop Screw Stainless Steel 34 Hex Head Screw Stainless Steel Note: Additional materials available upon request 86

95 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF CLASS piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF H1 W1 W2 WEIGHTS LBS/KG IN 2* / 26 MM / 12 IN 3* / 48 MM / 22 IN 4* / 77 MM / 35 IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM /

96 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF CLASS piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* / 37 MM / 17 IN 4 x 3* / 62 MM / 28 IN 6 x / MM / IN 8 x / MM / IN 10 x / MM / IN 12 x / MM / IN 14 x / MM / IN 16 x / MM / IN 18 x / MM / IN 20 x / MM / IN 24 x / MM /

97 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF CLASS piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF H1 W1 W2 WEIGHTS LBS/KG IN 2* / 33 MM / 15 IN 3* / 66 MM / 30 IN 4* / 121 MM / 55 IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM /

98 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF CLASS piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* / 44 MM / 20 IN 4 x 3* / 97 MM / 44 IN 6 x / MM / IN 8 x / MM / IN 10 x / MM / IN 12 x / MM / IN 14 x / MM / IN 16 x / MM / IN 18 x / MM / IN 20 x / MM / IN 24 x / MM /

99 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ CLASS piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ H1 W1 W2 WEIGHTS LBS/KG IN 2* / 77 MM / 35 IN 3* / 121 MM / 55 IN 4* / 224 MM / 102 IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM / IN / MM /

100 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ CLASS piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ H1 W1 W2 WEIGHTS LBS/KG IN 3 x 2* / 86 MM / 39 IN 4 x 3* / 158 MM / 72 IN 6 x / MM / IN 8 x / MM / IN 10 x / MM / IN 12 x / MM / IN 14 x / MM / IN 16 x / MM / IN 18 x / MM / IN 20 x / MM / IN 24 x / MM /

101 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 3* / 121 MM / 55 IN / MM / IN / MM /

102 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 3x2* / 121 MM / 55 IN 4x / MM / IN 6x / MM /

103 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 D H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 2* / 147 MM / 67 IN 3* / 286 MM / 130 IN / MM / IN / MM /

104 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT W2 W1 d D H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END CENTER-TO-BOTTOM LEVER/HANDWHEEL D d A - RF A - RTJ A - WE H1 W1 W2 WEIGHTS LBS/KG IN 2x1.5* / 147 MM / 67 IN 3x2* / 286 MM / 130 IN 4x / MM / IN 6x / MM /

105 CARBON & STAINLESS STEEL 2-PIECE TRUNNION BALL VALVES - FULL & REDUCED PORT 2-Piece Trunnion Ball Valves Full & Reduced Port Flow Coefficients Cv Values & Opening Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size / x x x x / / / / 10 x / / / / / / / / / / / / / / / / / / Opening Torques for Soft Seats The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size ISO Full Port Reduced Port Full Port Reduced Port Full Port Reduced Port Full Port / 26 F03/F / / 74 F05/F / / 199 F / / / 4 F10/F / / 8 F / / / 10 F / / / Notes 1 Torques may change with different mediums and trim materials. 2 All valves are at normal temperature with PTFE seats for Class 150 and 300 lbs. Nylon seats for class 600 through All torques are at maximum differential. Safety factor not included. 97

106 3-Piece Trunnion Ball Valves - API 6A Carbon, Alloy, & Stainless Steel Sizes 2-1/16 thru 13-5/8 Pressure 2000, 3000, 5000 Design and Manufacturing Standards Basic Design API 6A Shell Wall Thickness API 6A Face to Face Dimension API 6A Flange End Dimension API 6A Inspection & Testing API 6A Fire Safe Design API 6FA/BS

107 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API6A Pressure 2000, 3000, 5000 Model I Model E

108 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API6A Pressure 2000, 3000, 5000 Bill of Materials No Name Of Part Materials 1 Body 4130 A182, F316 2 Closure 4130 A182, F316, A351, CF8M 3 Stem AISI 1045 ENP, AISI 4140 ENP AISI 4140 ENP 316 SS, 17-4 PHSS 4 Seat Ring A105 ENP, A106 ENP A350, LF2 ENP 316 SS 5 Ball A105 ENP A350, LF2 ENP A182F316, A351, CF8M 6 Seat Insert Nylon, PEEK 7 Trunnion AIS1 1045, AISI SS, Trunnion Block AIS1 1045, AISI SS, Trunnion Block Pin AISI SS, Gland AIS SS, Adapter Plate AIS SS, Stem O-ring/ Lipseal Viton Viton GLT Viton 11 Stem O-ring Viton Viton GLT Viton 12 Gland O-ring Viton Viton GLT Viton 13 Seat O-ring/Lipseal Viton Viton GLT Viton 14 Seat Subseal Viton, Graphite Viton GLT, Graphite Viton, Graphite 15 Closure O-ring Viton Viton GLT Viton 16 Trunnion O-ring Viton Viton GLT Viton 17 Backup Ring Nylon 18 Gland Seal Graphite Seal 19 Body Seal Graphite Seal 20 Trunnion Seal Graphite Seal 21 Stem Packing Graphite 22 Seat Spring Inconel X-750, 17-4 PHSS 23 Bearing PTFE, Carbon Steel PTFE, 316SS 24 Thrust Washer PTFE, Carbon Steel PTFE, 316SS 25 Sealant Fitting Carbon Steel, SS Ball Check 316SS, SS Ball Check 26 Socket Bolt A SS 27 Hex/Socket Bolt A SS 28 Stud Bolt A193 B7M A320 L7M A193 B8 29 Hex Nut A194 2HM A194 7M A Grounding Pin Stainless Steel 31 Grounding Spring Stainless Steel 32 Key Carbon Steel Stainless Steel 33 Dowel Pin Carbon Steel Stainless Steel 34 Relief Plug Carbon Steel Stainless Steel 35 Drain Plug Carbon Steel Stainless Steel 36 Mounting Plate Carbon Steel Stainless Steel 37 Gear Operator Ductile Iron Case, Carbon Steel Worm Gear 38 Hand Wheel Carbon Steel, Ductile Iron Note: Materials also available in F321, F347, F51, F53, monel, inconel, incolloy and hastelloy. Metal-to-metal seated ball valve designs are available upon request. Note: Additional materials available upon request 100

109 3-Piece Trunnion Ball Valves - API 6A Design Features and Applications CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A SCV s standard ball valves have been designed to API s highest standards. Complete Split body & Fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance. SCV is supplying its products to the Crude oil transport and processing, Power engineering, Water supply systems and Process Industries throughout the world. Seal Feature SCV ball valves are produced with spring-loaded seats. This spring load keeps the seat in contact with the ball even in absence of line pressure and makes very efficient seal at low line pressure.as line pressure increases, the seat area creates a piston effect which forces the seat against the ball, therefore a tight seal becomes effective. If the pressure is higher, the force exerted by the seat on the ball is increased by action of the pipeline pressure. Therefore, the higher the line pressure, the greater the piston action. Ball Seat Insert (Metal) Seat Insert (Metal) Graphite Gasket Graphite Gasket Before Fire Figure 1 Self Lubrication Self lubrication, low friction PTFE is used for trunnion and stem bearings. NYLON or other low friction materials are used for seat inserts. Self lubricating seals and stem bearing give predictable operating torque for the life of the valve. Fire Safe Construction with Secondary Metal Seat SCV s ball valves have been fire tested and can be supplied to API 6FA and API 607. The soft seat inserts, irrespective of their materials, will possibly fail when subjected to sudden high temperature conditions. SCV provides a fire-safe design which may substantially prevent leakages through seals when damaged by high temperature. The function of the seats before and after the fire test is shown on the sketches. If the seat inserts are destroyed or burned out, a metal to metal seal is formed between the lower diameter of the seat and ball, while the seat to body seals, the stem packing and the end connections to body seals are designed to resist high temperature and will remain undamaged. (Figures 1 & 2) Ball After Fire Figure 2 Figure 3 Trunnion Mounting Trunnion mounted stems absorb the thrust from line pressure, preventing excess friction between the ball and seats, so even at full rated working pressure, operating torque stays low. (Figure 3) Body Body Vent and Drain The body cavity may be vented in both open and closed state. (Figure 4) Ball Figure 4 101

110 3-Piece Trunnion Ball Valves - API 6A Design Features and Applications CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A Double Block and Bleed The seats are of both-side-sealing type, which means that they seal both on the upstream or downstream side of the ball valve and inside the valve. Whether in the open or closed position, pressure on each side of the ball is blocked from the body cavity by the seat rings engineered to self relieve. No pressure build up can occur in to body cavity. The body cavity can then be vented to the atmosphere or drained through the body port. (Figure 5) Sealant Fitting Sealant lubrication fittings come as a standard with SCV s design. In the event of seat insert or stem seal damage, external or internal leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant seal around the stem or between the seat and the ball until such time the valve may be properly serviced. (Figures 6, 7 & 8) Antistatic Device The springs provided at the stem allow the static charges to be led to the piping. In this way, an electrostatic charging of the ball is eliminated. (Figure 9) Stem Seal with Blow Out Proof Stem The stem is independent of the ball and is a blow-out proof design. As an integral part, a stem has a flange at its lower side. The stem flange prevents the stem from blowingout. This feature also allows replacement of stem packing while the valve is under pressure.the torque is transmitted to the ball by a generously proportioned mating joint, hence the stem is not affected by the side thrust. Upstream Execution for 2 thru 4 Body Ball Figure 6 Execution for all Sizes Downstream Figure 5 Execution for 4 and Larger Figure 7 Body Adapter Ball Bonnet Figure 8 Body Bonnet Body Stem Ball Figure 9 102

111 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/ IN 2-9/ IN 3-1/ IN 4-1/ IN 7-1/ IN IN IN 13-5/

112 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/ IN 2-9/ IN 3-1/ IN 4-1/ IN 7-1/ IN IN IN 13-5/

113 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A H3 F H1 A - RTJ pressure piece trunnion ball valves - api 6a DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS F A - RTJ H1 H3 LBS/KG IN 2-1/ IN 2-9/ IN 3-1/ IN 4-1/ IN 7-1/ IN IN IN 13-5/

114 CARBON, ALLOY, & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6A 3-Piece Trunnion Ball Valves - API 6A Flow Coefficients Cv Values & Operating Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Pressure PSI Size IN 2-1/16 GPM IN 2-9/16 GPM IN 3-1/8 GPM 1, IN 4-1/16 GPM 1,850 1,760 1,610 IN 7-1/16 GPM 4,400 4,300 4,080 IN 9 GPM 8,450 8,400 7,980 IN 11 GPM 14,250 14,160 13,020 IN 13-5/8 GPM 22,790 21,230 16,910 Operating Torques The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Pressure PSI Size IN 2-1/16 Ft. Lbs. 1,413 1,843 5,749 IN 2-9/16 Ft. Lbs. 1,413 1,843 5,749 IN 3-1/8 Ft. Lbs. 4,103 5,405 9,951 IN 4-1/16 Ft. Lbs. 5,651 10,196 18,427 IN 7-1/16 Ft. Lbs. 12,284 23,095 46,068 IN 9 Ft. Lbs. 24,569 44,224 67,566 IN 11 Ft. Lbs. 43,979 64,864 92,871 IN 13-5/8 Ft. Lbs. 66,216 90, ,388 1 Torques may change with different mediums and trim materials. 2 All torques are at maximum differential. Safety factor not included. Notes 106

115 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Carbon & Stainless Steel Sizes 1-48 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI/AMSE B16.5 (1/2 to 24 ) AMSI/ASMEB16.47 (26 & up) Butt-Weld End Dimension ANSI/ASME B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS

116 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class Bolted Body Construction Model I Model E

117 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class Welded Body Construction Model I Model E

118 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API6D - Full & Reduced Port Class Bill of Materials No Name Of Part Materials 1 Body A105, A350 LF2 A350 LF2 A182, F316 2 Closure A105, A350 LF2 A350 LF2 A182 F316, A351, CF8M 3 Stem A105 ENP A350 LF2 316 SS, 17-4 PHSS, Seat Ring A105 ENP, A106 ENP A350 LF2 ENP 316 SS, Ball A105 ENP A350 LF2 ENP A182F316, A351, CF8M, Seat Insert Nylon, PTFE, PEEK 7 Trunnion AIS1 1045, AISI SS, Trunnion Block AIS1 1045, AISI SS, Trunnion Block Pin AISI SS, Gland AIS SS, Adapter Plate AIS SS, Stem O-ring/ Lipseal Viton Viton GLT Viton 11 Stem O-ring Viton Viton GLT Viton 12 Gland O-ring Viton Viton GLT Viton 13 Seat O-ring/Lipseal Viton Viton GLT Viton 14 Seat Subseal Viton, Graphite Viton GLT, Graphite Viton, Graphite 15 Closure O-ring Viton Viton GLT Viton 16 Trunnion O-ring Viton Viton GLT Viton 17 Backup Ring PTFE, Nylon 18 Gland Seal Spiral Wound Gasket 316SS + Graphite 19 Body Seal Spiral Wound Gasket 316SS + Graphite 20 Trunnion Seal Spiral Wound Gasket 316SS + Graphite 21 Stem Packing Graphite 22 Seat Spring Inconel X-750, 17-4 PHSS 23 Bearing PTFE, Carbon Steel PTFE, 316SS 24 Thrust Washer PTFE, Carbon Steel PTFE, 316SS 25 Sealant Fitting Carbon Steel, SS Ball Check 316SS, SS Ball Check 26 Socket Bolt A SS 27 Hex/Socket Bolt A SS 28 Stud Bolt A193 B7M A320 L7M A193 B8 29 Hex Nut A1942HM A194 7M A Grounding Pin Stainless Steel 31 Grounding Spring Stainless Steel 32 Key Carbon Steel Stainless Steel 33 Dowel Pin Carbon Steel Stainless Steel 34 Relief Plug Carbon Steel Stainless Steel 35 Drain Plug Carbon Steel Stainless Steel 36 Mounting Plate Carbon Steel Stainless Steel 37 Gear Operator Ductile Iron Case, Carbon Steel Worm Gear 38 Hand Wheel Carbon Steel, Ductile Iron Note: Materials also available in F321, F347, F51, F53, monel, inconel, incolloy and hastelloy. Metal-to-metal seated ball valve designs are available upon request. Note: Additional materials available upon request 110

119 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Design Features and Applications SCV s standard ball valves have been designed to API s highest standards. Complete Split body & Fully welded design offers maximum protection against line pressure and thermal distortion with long life and trouble-free performance. SCV is supplying its products to the Crude oil transport and processing, Power engineering, Water supply systems and Process Industries throughout the world. Seal Feature SCV ball valves are produced with spring-loaded seats. This spring load keeps the seat in contact with the ball even in absence of line pressure and makes very efficient seal at low line pressure.as line pressure increases, the seat area creates a piston effect which forces the seat against the ball, therefore a tight seal becomes effective. If the pressure is higher, the force exerted by the seat on the ball is increased by action of the pipeline pressure. Therefore, the higher the line pressure, the greater the piston action.seats are available in PTFE, R-PTFE, NYLON or others upon request. Ball Seat Insert (Metal) Seat Insert (Metal) Graphite Gasket Graphite Gasket Before Fire Figure 1 Self Lubrication Self lubrication, low friction PTFE is used for stem bearings, stem seals, and body seats. NYLON or other low friction materials are used for seat inserts. Self lubricating seals and stem bearing give predictable operating torque for the life of the valve. Ball After Fire Figure 2 Fire Safe Construction with Secondary Metal Seat SCV s ball valves have been fire tested and can be supplied to API 6FA and API 607. The soft seat inserts, irrespective of their materials, will possibly fail when subjected to sudden high temperature conditions. SCV provides a fire-safe design which may substantially prevent leakages through seals when damaged by high temperature. The function of the seats before and after the fire test is shown on the sketches. If the seat inserts are destroyed or burned out, a metal to metal seal is formed between the lower diameter of the seat and ball, while the seat to body seals, the stem packing and the end connections to body seals are designed to resist high temperature and will remain undamaged. (Figures 1 & 2) Figure 3 Trunnion Mounting Trunnion mounted stems absorb the thrust from line pressure, preventing excess friction between the ball and seats, so even at full rated working pressure, operating torque stays low. (Figure 3) Body Ball Body Vent and Drain The body cavity may be vented in both open and closed state. (Figure 4) Figure 4 111

120 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Design Features and Applications Double Block and Bleed The seats are of both-side-sealing type, which means that they seal both on the upstream or downstream side of the ball valve and inside the valve. Whether in the open or closed position, pressure on each side of the ball is blocked from the body cavity by the seat rings engineered to self relieve. No pressure build up can occur in to body cavity. The body cavity can then be vented to the atmosphere or drained through the body port. (Figure 5) Sealant Fitting Sealant lubrication fittings come as a standard with SCV s design. In the event of seat insert or stem seal damage, external or internal leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant seal around the stem or between the seat and the ball until such time the valve may be properly serviced. (Figures 6, 7 & 8) Antistatic Device The springs provided at the stem allow the static charges to be led to the piping. In this way, an electrostatic charging of the ball is eliminated. (Figure 9) Stem Seal with Blow Out Proof Stem The stem is independent of the ball and is a blow-out proof design. As an integral part, a stem has a flange at its lower side. The stem flange prevents the stem from blowingout. This feature also allows replacement of stem packing while the valve is under pressure.the torque is transmitted to the ball by a generously proportioned mating joint, hence the stem is not affected by the side thrust. Upstream Execution for 2 thru 4 Body Ball Figure 6 Execution for all Sizes Downstream Figure 5 Execution for 4 and Larger Figure 7 Body Adapter Ball Bonnet Figure 8 Body Bonnet Body Stem Ball Figure 9 112

121 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x 4* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 26 x MM 650 x IN 28 x MM 700 x IN 30 x MM 800 x IN 36 x MM 900 x IN 42 x MM 1050 x IN 48 x MM 1200 x

122 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x 3* MM 100 x IN 6 x 4* MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 X / / MM 600 x / / IN 36 X / / MM 900 x / / IN 42 X / / MM 1050 x / / IN 48 X / / MM 1200 x / /

123 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x 4* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 26 x MM 650 x IN 28 x MM 700 x IN 30 x MM 800 x IN 36 x MM 900 x IN 42 X / / MM 1050 x / / IN 48 X / / MM 1200 x / /

124 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x 3* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 X / MM 800 x / IN 36 X / MM 900 x / IN 42 X / / MM 1050 x / / IN 48 X / / MM 1200 x / /

125 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x 4* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 26 x MM 650 x IN 28 x MM 700 x IN 30 x MM 750 x IN 36 x MM 900 x IN 42 X / MM 1050 x / IN 48 X / MM 1200 x /

126 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x 3* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 X / MM 800 x / IN 36 X / MM 900 x / IN 42 X / MM 1050 x / IN 48 X / MM 1200 x /

127 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 x / MM 750 x / IN 36 x / MM 900 x /

128 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x 3* MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 X / MM 750 x / IN 36 X / MM 900 x / IN 42 X / MM 1050 x /

129 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port 121 DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 1 x 1* 1.00 / 10.0 / / MM 25 x / 254 / / IN 1.5 x 1.5* 1.50 / 12 / / MM 38 x / 305 / / IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 x / MM 750 x / IN 36 x / MM 900 x /

130 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x IN 30 X / MM 750 x /

131 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - full port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 1 x 1* 1.00 / 14.0 / / 97 / MM 25 x / 356 / / 36 / IN 1.5 x 1.5* 1.50 / / / 130 / MM 38 x / 387 / / 48 / IN 2 x 2* MM 50 x IN 3 x 3* MM 80 x IN 4 x MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x

132 CARBON & STAINLESS STEEL TRUNNION MOUNTED BALL VALVES - API 6D H3 F H1 A - RF A - RTJ A - WE CLASS piece trunnion ball valves - api 6d - reduced port DIMENSIONS & WEIGHTS * = Lever operated BORE END-TO-END BODY DIMENSIONS FLG WEIGHTS BW WEIGHTS F A - RF A - RTJ A - WE H1 H3 LBS/KG LBS/KG IN 3 x 2* MM 80 x IN 4 x MM 100 x IN 6 x MM 150 x IN 8 x MM 200 x IN 10 x MM 250 x IN 12 x MM 300 x IN 14 x MM 350 x IN 16 x MM 400 x IN 18 x MM 450 x IN 20 x MM 500 x IN 24 x MM 600 x

133 3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Flow Coefficients Cv Values & Operating Torques Flow Coefficients Cv Values The Flow Coefficiency (Cv) of a valve is the rate of gallons per minute of water at 60 F through a fully opened valve at a pressure drop of 1 PSI across the valve. Size IN 2 x 2 MM 50 x 50 IN 3 x 2 MM 80 x 50 IN 3 x 3 MM 80 x 80 IN 4 x 3 MM 100 x 80 IN 4 x 4 MM 100 x 100 IN 6 x 4 MM 150 x 100 IN 6 x 6 MM 150 x 150 IN 8 x 6 MM 200 x 150 IN 8 x 8 MM 200 x 200 IN 10 x 8 MM 250 x 200 IN 10 x 10 MM 250 x 250 IN 12 x 10 MM 300 x 250 IN 12 x 12 MM 300 x 300 IN 14 x 12 MM 350 x 300 IN 14 x 14 MM 350 x 350 IN 16 x 14 MM 400 x 350 IN 16 x 16 MM 400 x 400 IN 18 x 16 MM 450 x 400 IN 18 x 18 MM 450 x 450 IN 20 x 18 MM 500 x 450 IN 20 x 20 MM 500 x 500 IN 24 x 20 MM 600 x 500 IN 24 x 24 MM 600 x 600 IN 26 x 26 MM 500 x 450 IN 28 x 28 MM 500 x 500 IN 30 x 30 MM 600 x 500 IN 36 x 36 MM 600 x 600 Class GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM GPM / GPM / / GPM / GPM / / GPM / GPM / / GPM / GPM / / GPM / GPM / / / / / / GPM / / / / / / GPM / / / / / / GPM / / / / / / Operating Torques The operating torques are in foot pounds and are calculated based on soft seats, normal temperatures, and clean media. Size IN MM 2 x 2 50 x 50 Ft. Lbs. IN 3 x 2 Ft. MM 80 x 50 Lbs. IN 3 x 3 Ft. MM 80 x 80 Lbs. IN 4 x 3 Ft. MM 100 x 80 Lbs. IN 4 x 4 Ft. MM 100 x 100 Lbs. IN 6 x 4 Ft. MM 150 x 100 Lbs. IN 6 x 6 Ft. MM 150 x 150 Lbs. IN 8 x 6 Ft. MM 200 x 150 Lbs. IN 8 x 8 Ft. MM 200 x 200 Lbs. IN 10 x 8 Ft. MM 250 x 200 Lbs. IN 10 x 10 Ft. MM 250 x 250 Lbs. IN 12 x 10 Ft. MM 300 x 250 Lbs. IN 12 x 12 Ft. MM 300 x 300 Lbs. IN 14 x 12 Ft. MM 350 x 300 Lbs. IN 14 x 14 Ft. MM 350 x 350 Lbs. IN 16 x 14 Ft. MM 400 x 350 Lbs. IN 16 x 16 Ft. MM 400 x 400 Lbs. IN 18 x 16 Ft. MM 450 x 400 Lbs. IN 18 x 18 Ft. MM 450 x 450 Lbs. IN 20 x 18 Ft. MM 500 x 450 Lbs. IN 20 x 20 Ft. MM 500 x 500 Lbs. IN 24 x 20 Ft. MM 600 x 500 Lbs. IN 24 x 24 Ft. MM 600 x 600 Lbs. IN 26 x 26 Ft. MM 500 x 450 Lbs. IN 28 x 28 Ft. MM 500 x 500 Lbs. IN 30 x 30 Ft. MM 600 x 500 Lbs. IN 36 x 36 Ft. MM 600 x 600 Lbs. Class / / / / / / / / / / / / / / / / / / / / / 125

134 Rising Stem Ball Valves Carbon & Stainless Steel Sizes 2-24 Class Design and Manufacturing Standards Basic Design API 6D Shell Wall Thickness API 6D Face to Face Dimension API 6D Flange End Dimension ANSI B16.5 (1/2 TO 24 ) & ANSI B16.47 (26 AND UP) Butt-Weld End Dimension ANSI B16.25 Inspection & Testing API 6D Fire Safe Design API 6FA/BS

135 Rising Stem Ball Valves Class CARBON & STAINLESS STEEL RISING STEM BALL VALVES W , H3 26, 27 23, 24, , , 9, A1 A1 A2 1 Bill of material 2 NO NAME OF PART MATERIAL NO NAME OF PART MATERIAL 1 BODY A216-WCB 18 O-RING VITON 2 SLEEVE A102 F PACKING WASHER A SEAT F ANTI-FIRE RING GRAPHITE BALL A PACKING BUSHING A SEAT RING PTFE 22 PACKING GLAND A216-WCB 6 O-RING VITON 23 SWING BOLT AISI STEM F316 + N 24 PIN AISI GLAND A36 25 TIGHT PIN AISI TIGHT BOLT 65Mn 26 BOLT AISI NUT AISI GUIDE PIN 17-4PH 11 SLIP PIN 17-4PH 28 BOLT A193 B7 12 YOKE A NUT A194 2H 13 O-RING VITON 30 STEM NUT C ANTI-FIRE RING GRAPHITE DRIVE DEVICE ASSEMBLY 15 BONNET A216-WCB 32 COVER A STUD BOLT A193 B7 33 INDICATOR ROD A36 17 NUT A194 2H 34 INJECTION ASSEMBLY 127

136 CARBON & STAINLESS STEEL RISING STEM BALL VALVES CLASS RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in mm in mm in mm in mm in mm in mm in mm lb kg CLASS RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in mm in mm in mm in mm in mm in mm in mm lb kg

137 CARBON & STAINLESS STEEL RISING STEM BALL VALVES CLASS RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in mm in mm in mm in mm in mm in mm in mm lb kg CLASS RISING STEM BALL valves DIMENSIONS VALVE A1 A2 (HW) H3 (GO) W1 (HW) W2 (GO) in mm in mm in mm in mm in mm in mm in mm lb kg

138 Pressure Temperature Ratings - ASME B Note: Pressures in PSI Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to / / / / / / / / / / 1050 / / / / / 20 / / / 1100 / / / / / 20 / / / 1150 / / / / / 20 / / / 1200 / / / / / 15 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to / / / / / / / / / / 1050 / / / / / 145 / / / 1100 / / / / / 95 / / / 1150 / / / / / 65 / / / 1200 / / / / / 40 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / 130

139 Pressure Temperature Ratings - ASME B Note: Pressures in PSI Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to / / / / / / / / / / 1050 / / / / / 290 / / / 1100 / / / / / 190 / / / 1150 / / / / / 130 / / / 1200 / / / / / 80 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to / / / / / / / / / / 1050 / / / / / 430 / / / 1100 / / / / / 290 / / / 1150 / / / / / 195 / / / 1200 / / / / / 125 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / 131

140 Pressure Temperature Ratings - ASME B Note: Pressures in PSI Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to ASTM 3075 # / / / / / / / / / / 1050 / / / / / 720 / / / 1100 / / / / / 480 / / / 1150 / / / / / 325 / / / 1200 / / / / / 205 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / Temp. F A105 WCB LF2 WCC LCB WC6 LCC C5 C12 C12A 316 CF8M F51 F53-20 to / / / / / / / / / / 1050 / / / / / 1200 / / / 1100 / / / / / 800 / / / 1150 / / / / / 545 / / / 1200 / / / / / 345 / / / 1250 / / / / / / / / / / / / 1300 / / / / / / / / / / / / 1350 / / / / / / / / / / / / 1400 / / / / / / / / / / / / 1450 / / / / / / / / / / / / 1500 / / / / / / / / / / / / 132

141 Flange Dimensions - ANSI B16.5 & B16.47 T L r F R C O P K O Groove Detail Class Flg. Dia. Flg. Thick. Raised Face Dia. Drilling Face Dia. Ring Joint Size Bolt Pitch Grv. Grv. Btm. CIrcle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R C K P L F r R R R R R R R R R R R R / / / / / / R / R / R / R / R / R / R R R R R R R R R R R R R R R R R R R R R98 133

142 Flange Dimensions - ANSI B16.5 & B16.47 T L r F R C O P K O Groove Detail Flg. Dia. Flg. Thick. Circle Raise Drilling Face Dia. Ring Joint Class Size Bolt Pitch Grv. Grv. Btm. CIrcle Dia. # of Hole Dia. Depth Width Radius Ring Bolts Dia. No. O T R C K P L F r R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

143 Butt-welding Dimensions - ANSI B16.25 Nominal Pipe Size Schedule Number or Wall Outside Diameter (Cast Steel Valves) A Nominal Inside Diameter B Machined Inside Diameter C Nominal Wall Thickness t Inches mm Inches mm Inches mm Inches mm 3 xxs 3-19/ xxs 4-5/ / xxs / xxs / xxs / / / / / / /

144 Butt-welding Dimensions - ANSI B16.25 Plain Bevel Butt-welding End for Pipe Wall Thickness is 7/8 (22.23mm) or less. Welding end details for cast components for use without backing ring or with split backing ring. Compound Bevel Butt-welding End for Pipe Wall Thickness Greater than 7/8 (22.23mm). Welding end details for cast components for use without backing ring or with split backing ring. 45 Typical Sections Outside Contour Max Slope Line 45 Typical Sections Outside Contour Max Slope Line _ _ 1 Rad Max t Inside Contour 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A Max 30 3/4 (19mm) 1.5 t Inside Contour _ 2.5 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A Plain Bevel Butt-welding End for Pipe Wall Thickness is 7/8 (22.23mm) or less. Welding end details for cast components for use with continuous rectangular or tapered backing ring. Compound Bevel Butt-welding End for Pipe Wall Thickness Greater than 7/8 (22.23mm). Welding end details for cast components for use with continuous rectangular or tapered backing ring. 45 Typical Sections Outside Contour Max Slope Line 45 Typical Sections Outside Contour Max Slope Line _ _ 1 Rad Inside Contour Max 30 Max 30 1/2 (12.7mm) Min. 1.5 t 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B C A Inside Contour Max 30 3/4 (19mm) _ t 7/32 (5.6mm) 1/16 +_ 1/32 (1.6mm +_ 0.8mm) B A 136

145 Industry Standards for Valve Manufacturing This information is for reference only. American Society of Mechanical Engineers (ASME) ASME Code - Boiler & pressure vessel code ASME A Scheme for the identification of piping systems ASME B1.1 - Unified inch screw threads, UN, & UNR thread form ASME B1.5 - ACME screw threads ASME B1.7M - Nomenclature, definitions, & letter symbols for screw threads ASME B1.8 - Stub ACME screw threads ASME B Class 5 interference - fit thread ASME B Pipe threads, general purpose, inch ASME B Dry-seal pipe threads, inch ANSI/ASME B Cast iron pipe flanges & flanged fittings ANSI/ASME B Pipe flanges & flanged fittings: NPS 1/2-24 ASME B Factory made wrought steel buttwelding fittings ANSI/ASME B Face-to-face & end-to-end dimensions of valves ASME B Forged fittings, socket welding & threaded ASME B Metallic gaskets for pipe flanges: ring joint spiral wound & jacketed ASME B Non-metallic flat gaskets for pipe flanges ASME B Buttwelding ends ANSI/ASME B Manually operated metallic gas valves for use in gas piping systems up to 125 PSI (sizes NPS 1/2-2 ) ANSI/ASME B Power piping ANSI/ASME B Process piping ANSI/ASME B Valves flanged, threaded & welding end ANSI/ASME B Orifice flanges ANSI/ASME B Large metallic valves for gas distribution (manually operated, NPS 2-1/2-12, 125 PSIG maximum) ANSI/ASME B Ductile iron pipe flanges & flanged fittings: classes 150 & 300 ANSI/ASME B Large diameter steel flanges ANSI B Keys & keyseats ANSI B Square & hex nuts ASME B Pipeline transportation systems for liquid hydrocarbons & other ammonia & alcohols ANSI/ASME B Gas transmission & distribution piping systems ANSI/ASME B Welded & seamless wrought steel pipe ANSI/ASME B Stainless steel pipe ANSI FCI-2 - Control valve seat leakage American Society Non-destructive Test (ASNT) ASNT-TC-1A - Recommended practice no. SNT-TC-1A 1996 American Society for Testing and Materials (ASTM) American Petroleum Institute (API) API RP Inspection practices for piping system components API Fire test for evaluation of valve stem packing API RP Process valve qualification procedure API Check valves-flanged, lug, wafer & buttwelding API Steel venturi gate valves, flanged, buttwelding ends API Valve inspection & testing API Metal plug valves - flanged, welding ends API Metallic gaskets for raised-face pipe flanges & flanged connections (double-jacketed corrugated & spiral wound) API Bolted bonnet steel gate valves for petroleum & natural as industries ISO adoption from ISO API Steel gate, globe, & check valves for sizes DN100 and smaller for the petroleum & natural gas industries API Corrosion-resistant, bolted bonnet gate valves-flanged & buttweld ends API Ductile iron gate valves, flanged ends API Large-diameter carbon steel flanges (nominal pipe sizes 26-60, classes 75, 150, 300, 400, 600, & 900 (replaced by ANSI/ASME B16.47) API Compact steel gate valves, extended body (included in API 602) fire test for soft-seated quarterturn valves ISO adoption from ISO API Fire test for soft-seated quarter-turn valves ISO adoption from ISO API Metal ball valves, flanged, threaded, & welding ends API Butterfly valves-double flanged, lug- & wafer-type API RP Steel for hydrogen service at elevated temperatures & pressures in petroleum refineries & petrochemical plants API RP 520, Part 1 - Sizing, selection & installation of pressure relieving devices in refineries API RP 520, Part 2 - Sizing, selection & installation of pressure relieving devices in refineries devices in refineries API Spec 6A - Specification for wellhead & christmas tree equipment API Spec 6D - Specifications for pipeline valves API Spec 14D - Specifications for wellhead surface safety valves & underwater safety valves for offshore service API 5B - Threading, gauging thread inspection of coring, tubing, & line pipe threads API 6AM - Material toughness API 6FA - Fire test for valves API 6FC - Fire test for valves with backseats API 6FD - Specification for fire test for check valves API Q1 - Specification for quality programs for the petroleum, petrochemical, & natural gas National Association of Corrosion Engineers (NACE) MR Sulfide stress cracking resistant metallic materials for oil field equipment MR Materials resistant to sulfide street cracking in corrosive petroleum refining environments British Standards Institute (BS) BS Gate, wedge & double disk valves: steel BS Check valves: steel BS Globe & check valves: steel BS Flanged & buttweld end steel valves BS (withdrawn) Replaced by BS 6755 p.1 steel valves testing (1986) & BS 6755 p.2 (1984) BS Globe & check: cast iron BS Check: cast iron BS Ball: cast iron & carbon steel BS Globe & check: steel BS Gate, wedge & double disk: cast iron BS Ball: steel BS Globe & check: steel BS (withdrawn) Replaced by BS EN 19 (1992) marking: general purpose industrial BS Valve mating details for actuator operation BS Cryogenic BS Guide: installation & use of valves BS 6755: Part 1 - Specification for production pressure testing requirements BS 6755: Part 2 - Specification for fire type-testing requirements BS EN 19 - Marking of general purpose industrial valves Canadian Standards Association B Boiler, pressure vessel, & pressure piping code Z Steel valves CAN3-z Quality assurance program - Category 4 CAN3-z Quality assurance program - Category 3 International Organization for Standardization ISO 5211/1 - Industrial valves- part-turn actuator attachments ISO 5211/2 - Part-turn valve actuator attachment-flange & coupling performance characteristics ISO 5211/3 - Part-turn valve actuator attachment-dimensions of driving components ISO Metal valves for use in flanged pipe systems face-to-face & center-to-face dimensions ISO Quality management systems and fundamentals & vocabulary ISO Quality assurance requirements for measuring equipment Manufacturers Standardization Society SP-6 - Standard finishes for contact faces of pipe flanges & connecting-end flanges of valves & fittings SP-9 - Spot facing for bronze, iron & steel flanges SP-25 - Standard marking system for valves, fittings, flanges & unions SP-42 - Class 150 corrosion resistant gate, globe, angle, & check valves with flanged & buttweld ends SP-44 - Steel pipeline flanges SP-45 - Bypass & drain connections SP-51 - Class 150/w corrosion resistant cast flanges & flanged fittings SP-53 - Quality standard for steel castings & forgings for valves, flanges, & fittings & other piping components: magnetic particle exam method SP-54 - Quality standard for steel castings for valves, flanges, & fittings and other piping components: radiographic examination method SP-55 - Quality standard for steel castings for valves, flanges other piping components-visual method for evaluation of surface irregularities SP-60 - Connecting flange joint between tapping sleeves & tapping valves SP-61 - Pressure testing of steel valves SP-65 - High pressure chemical industry flanges & threaded stubs for use with lens gaskets SP-67 - Butterfly valves SP-69) - ANSI/MSS edition pipe hangers & supports, selection & application SP-70 - Cast iron gate valves, flanged & threaded ends SP-71 - Gray iron swing check valves, flanged & threaded ends SP-72 - Ball valves with flanged or butt-welding ends for general service SP-79 - Socket-welding reducer inserts SP-81 - Stainless steel, bonnetless, flanged knife gate valves SP-82 - Valve pressure testing methods SP-84 - Valves - socket welding & threaded ends SP-85 - Cast iron globe & angle valves, flanged & threaded ends SP-86 - Guidelines for metric data in standards for valves, flanges, fittings & actuators SP-88 - Diaphragm valves SP-91 - Guidelines for manual operation of valves SP-92 - MSS valve user guide SP-93) - Quality standard for steel castings & forgings for valves, flanges & fittings & other piping components- liquid penetrant exam method SP-94 - Quality standard for ferritic & martensitic steel castings for valves, flanges, & fittings and others piping components - ultrasonic exam method SP-96 - Guidelines on terminology for valves & fittings SP-98 - Protective coatings for the interior of valves, hydrants, & fittings SP-99 - Instrument valves SP Part-turn valve actuator attachment-flange and driving component dimensions & performance characteristics SP Multi-turn valve actuator attachment: flange and driving component dimensions & performance characteristics SP Ball valves threaded, socket-welding, solder joint, grooved, & flared ends SP Bellows seals for globe & gate valves SP Compact steel globe and check valves-flanged, flangeless, threaded & welding ends (chemical & petroleum refinery service) SP Flexible graphite packing system for rising stem steel valves (design requirements) SP Qualification testing methods for stem packing for rising stem steel valves 137

146 Terms & Conditions TERMS & CONDITIONS Quotation Validity This quotation is valid for 30 days from the date quotation is sent. Validity on special metals, including Stainless Steel, is 14 days from the date the quotation is sent. All products offered from stock are subject to prior sale. Shipments All items quoted are Ex-Works / FOB our Dock in Santa Fe Springs, CA - West Coast USA. The seller fulfills the obligation to deliver when the goods are made available at the seller s premises. The seller agrees (on the seller s premises) to load the items on the buyers scheduled mode of transportation. The equipment quoted shall be packed in accordance with seller s standard packing procedure. Any additional packaging requesting by the buyer is the responsibility of the buyer, unless otherwise agreed to in writing by the seller. Shipments may be billed either third party billing to the buyer or freight collect. Shipment dates offered above are forecasted delivery lead times and are estimated from the date payment terms (acceptable to seller) are established, clarification is received on all technical information, and resolution of customer s written approval of drawings is received (when required). Force Majeure If in the case of an act of God, war, riot, fire, explosion, flood, or any other circumstances of whatsoever nature which are beyond the control of the seller and which in any way affect the ability of the seller to fulfill its delivery obligations, the delivery is hindered, impeded, or delayed the seller shall be exonerated from all responsibilities and reserves the right to postpone the delivery beyond the original schedule. Payment terms All terms are to be negotiated. Credit cards accepted (Master Card, Visa, American Express). Purchase Orders All buyer s purchase orders supplied to the seller are to be written in the English language. Prices All prices quoted are in USD as per the preceding pricing schedule. The minimum order value is $5, (five thousand dollars), unless otherwise agreed to by seller. If for some reason any items are changed or additions to the order required, seller reserves the right to adjust prices accordingly. All sales are subject to approval of seller s credit department. If buyer fails to meet the agreed upon and established commercial terms of the contract, the seller may with-hold all subsequent deliveries until such time that the original commercial terms of the contract have been met by the buyer (or subsequent commercial terms have been agreed upon by the seller with the buyer). Intellectual Property All specifications, illustrations, drawings, certificates, and other particulars supplied by seller remain the intellectual property of the seller and should not be disclosed to any third party without the prior written consent of seller. Warranty All seller s products are guaranteed against defects in workmanship for a period of twelve (12) months after being placed in service, but not exceeding eighteen (18) months after shipment, when products are properly installed per seller specifications and used within the service and pressure range for which they were manufactured. Full risk of loss shall pass to the buyer upon delivery Ex-works, or destination port in case of CIF. This guarantee is limited to the replacement of any valve parts/components found to be defective either in material or workmanship. This guarantee does not extend to costs of labor, freight, or any other consequential charges. The unauthorized use of third party components and workmanship in seller s products voids this warranty. Limitation of Liability The liability of the seller under this agreement or with respect to any products supplied or services performed pursuant to this agreement, whether in contract, in tort, in strict liability or otherwise, shall not exceed the purchase price paid by the buyer with respect therto. In no event will the seller be liable in contract, in tort, in strict liability or otherwise for any special, indirect, incidental, or consequential damages. This is including but not limited to loss of anticipated profits or revenues, loss of use, non-operation or increased expense of operation of equipment, cost of capital, or claims from customer or buyer for failure or delay in achieving anticipated profits or products. Cancellation No contract may be canceled by the buyer except upon written notice to seller and upon payment to seller of all costs incurred by the contract arising out of, or in connection with, the contract. Export of goods covered hereby is subject to United States Customs Control. Standard stocking items will be subject to a twenty-five percent (25%) restocking and/or cancellation charge. Non-standard stocking items will be subject to a one-hundred percent (100%) restocking and/or cancellation charge. Cancellation Charge The following indicates the rates of cancellation charge of contract value for project manufactured items and/or special engineered items at various stages of production: Time of cancellation: Order Acknowledgement and prior to Engineering engagement. Cancellation Charge: 10% Time of cancellation: After start of engineering but prior to release to production. Cancellation Charge: 30% Time of cancellation: After release to production but prior to completion of fabrication. Cancellation Charge: 80% Time of cancellation: After completion of fabrication. Cancellation Charge: 100% Return of Goods No product shall be returned to seller without written authorization and shipping instructions having been obtained from seller. Products authorized for returns are to be shipped freight pre-paid to the FOB manufacturing point, unless otherwise notified, and are subject to seller s standard re-stocking fees. Documentation MTR s are available at no charge upon request. The seller s standard document package is per ISO B requirements. Additional requested documentation is subject to charge. Inspection The customer or his authorized representative may, with four (4) weeks prior notice given to seller, visually inspect products manufactured by seller. Such seller approved inspections will be carried out in accordance with seller s standard or seller approved customer inspection procedures. If any inspection or documentation requested by the customer is over and beyond the scope and criteria initially agreed to by the seller, any costs incurred by conducting such inspection or preparation of special documents shall be paid by the buyer prior to release of the items for shipment. Witness Hydro-Testing Witness hydro-testing is available at a cost. A scope of buyers inspection request is to be provided to seller at order placement. Late notice of such requested inspection is subject to additional costs. The cost associated with such witness hydro request is to be agreed on prior to any such testing taking place. Payment of this type of testing to be negotiated. Additionally, any costs associated with a third party inspector will not be at the sellers expense. 138

147 13903 Maryton Avenue Santa Fe Springs, CA Phone: Fax: MANUFACTURING FACILITY SCV SALES AND PROJECT OFFICE Friendswood, TX Phone: Fax: