"ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria
|
|
- Timothy George
- 6 years ago
- Views:
Transcription
1 "ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria Brick Composits Concrete Natural Masonry drill type Long Life, milled flutes, for percussion and rotary drilling of concrete, brick, natural stone etc. NO. S 94-1 "ALPEN" MASONRY DRILL BIT Item No. Dia. Size O.L. Packing Price (mm / inch) (mm) (pcs/pack) (pc) CDB (1/8) CDB (5/32) CDB (3/16) CDB050L 5.0 (3/16) CDB (7/32) CDB055L 5.5 (7/32) CDB (15/64) CDB060L 6.0 (15/64) CDB060VL 6.0 (15/64) CDB (1/4) CDB065L 6.5 (1/4) CDB (9/32) CDB070L 7.0 (9/32) CDB (5/16) CDB080L 8.0 (5/16) CDB080VL 8.0 (5/16) CDB (11/32) CDB (3/8) CDB100L 10.0 (3/8) CDB100VL 10.0 (3/8) CDB (7/16) CDB (15/32) CDB120L 12.0 (15/32) CDB120VL 12.0 (15/32) CDB (1/2) CDB (9/16) CDB140VL 14.0 (9/16) CDB140VVL 14.0 (9/16) CDB (19/32) CDB (5/8) CDB160VL 16.0 (5/8) CDB160VVL 16.0 (5/8) CDB (23/32) CDB180VL 18.0 (23/32) CDB180VVL 18.0 (23/32) CDB (13/16) CDB200L 20.0 (13/16) CDB (7/8) CDB (15/16) CDB (1) CDB250L 25.0 (1)
2 "ALPEN" / "PROJOBBER" TUNGSTEN CARBIDE-TIPPED DRILLS Concrete Composits Natural Marble High efficiency Profi Beton drill for heavyduty hammer and rotary percussion drilling of natural stone, concrete, brick and for rotary drilling of tiles, ceramics and marble. NO. S 94-2 "ALPEN" BETON TUNGSTEN CARBIDE TIPPED DRILL BIT FOR MARBLE (AUSTRIA) Item No. Dia. Size O.L. Packing Price (mm / inch) (mm) (pcs/pack) (pc) MDB (1/8) MDB (5/32) MDB (3/16) MDB (7/32) MDB (15/64) MDB (1/4) MDB (9/32) MDB (5/16) MDB (11/32) MDB (3/8) MDB (7/16) MDB (15/32) MDB (1/2) MDB (9/16) MDB (19/32) MDB (5/8) MDB (23/32) MDB (13/16) For drilling sheet glass, mirrors, bottles, procelain, ceramics etc. Spear point reduces cutting pressure for cleaner holes. Spear Point NO. S 94-3 "ALPEN" TUNGSTEN CARBIDE TIPPED DRILL BIT FOR GLASS, SPEAR POINT (AUSTRIA) Glass Tiles Roof Tiles Marble Item No. Dia. Size O.L. Shank Packing Price (mm) (mm) (pcs/pack) (pc) GDB /4" GDB /4" GDB /4" GDB /4" GDB /4" GDB /4" GDB mm 10 Rotary Only Spear Point NO. S 94-3X "PROJOBBER" TUNGSTEN CARBIDE TIPPED DRILL BIT FOR GLASS, SPEAR POINT (CHINA) Tungsten carbide-tipped glass drill suitable for drilling sheet glass, ceramics and porcelain. Item No. Dia. Size Overall Lgth Packing Price (mm) (mm) (pcs/pack) (pc) X-GD X-GD X-GD X-GD X-GD X-GD X-GD X-GD
3 "ALPEN" DRILLS - Austria Hard Porcelain/ Gres Tiles For extremely hard porcelain/gres tiles up to Mohs/Ritz hardness 9 and glass. No cooling required. Maximum spindle speed 200 rpm. Not suitable for percussion drilling. Glass NO. S 94-3Y "ALPEN" KERAMO EXTREME GLASS & GRANITE DRILL BIT Item No. Dia. Size O.L. Shank Packing Price (mm / inch) (mm) (mm) (pcs/pack) (pc) Y-K (3/16) Y-K (15/64) Y-K (5/16) Y-K (3/8) Y-K (15/32) Recommended Spindle Speed Rotary Only 239A
4 "ALPEN" SDS-PLUS HAMMER DRILL BITS - Austria NO. S 94-4 "ALPEN" SDS-PLUS (4 GROOVE) SHANK HAMMER DRILL BIT High efficiency drill for heavy-duty SDS hammer drilling of natural stone, concrete, brick etc. Concrete Natural Granite Brick Plate geometry specially developed for drilling through steel reinforcement concrete Item No. Dia. O.L. Flute L Pkg Price (mm) (mm) (mm) (pc/pk) (pc) SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS continue NO. S 94-4 (Continued) Item No. Dia. O.L. Flute L Pkg Price (mm) (mm) (mm) (pc/pk) (pc) SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS SDS * SDS SDS SDS SDS * SDS * SDS * SDS SDS SDS SDS SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS X-SDS * "KING" Brand (Japan) 10 pcs per tube (per tube) 5 pcs per tube (per tube) X-SDS X-SDS X-SDS
5 "ALPEN" DRILL BITS - Austria NO. S 94-5 "ALPEN" F8 SDS-PLUS SHANK HAMMER DRILL BIT WITH 4 SOLID CARBIDE CUTTING EDGE Especially suitable for drilling in reinforced concrete, natural stone and brick-work. Problem-free drilling through reinforced steel, vibrationless running and fast, removal of drilling dust. Concrete Natural Reinforced Granite Concrete Quick discharge Fast removal of drilling dust from the drilling head into the flute Less wear Centering tip Spot drilling with pinpoint accuracy No Slipping One-piece carbide tip with 4 solid carbide cutting edges Precise circular holes drill W ear-reduced geometry Item No. Dia. Size OL Lgth Flute Lgth Packing Price (mm) (mm) (mm) (pcs/box) (pc) F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F pcs per tube (per tube) X-F NO. S 94-6 "ALPEN" PROFI GRANITE DRILL BIT Special drill bits for rotary and percussion drilling of granite and marble. Extremely suitable for drilling all granite types with special drill bit geometry and carbide plate - even the hardest of granite. Marble Granite Item No. Dia. Size OL Lgth Flute Lgth Packing Price (mm) (mm) (mm) (pcs/box) (pc) G G G G G G G
6 "ALPEN" SDS MAX HAMMER DRILLS & DOWEL DRILLS - Austria Concrete Natural Reinforced Granite Concrete High efficiency drill for heavy-duty SDS hammer drilling of natural stone, concrete, brick etc. NO. S 94-7 Packing : 1 pc "ALPEN" SDS MAX (5 GROOVE) SHANK HAMMER DRILL BIT Item No. Dia. Size Overall Lgth Twisted Lgth Price (mm) (mm) (mm) (pc) M M120L M M140L M M150L M M160L M M180L M M190L M M200L M M220L M M250L M M280L M M300L M M320L M M350L M M380L M M400L Natural Wood Flooring Timbers For drilling in soft and hard wood, in chipboards, fibreboards, for drilling dowel holes. NO. S 94-9 "ALPEN" WOOD DOWEL DRILL Item No. Dia. Size Overall Lgth Twisted Lgth Price (mm) (mm) (mm) (pc) WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD WD Packing : mm (10 pcs/box) mm ( 8 pcs/box) 242
7 "ALPEN" / "PROJOBBER" TUNGSTEN CARBIDE-TIPPED DRILLS Extremely versatile and precise drilling even with changing drills in various materials. For precision rotary drilling in tiles, natural stone, metal, wood and plastics. Tiles Natural Wood Brick Steel Plastic Rotary Only NO. S / 10W "ALPEN" MULTI CUT DRILL BIT (AUSTRIA) Item No. Dia. Size Overall Lgth Twisted Lgth Price (mm) (mm) (mm) (pc) S Cylindrical Shank MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD MCD Cylindrical Shank SDS-Plus Shank S 94-10W SDS-Plus Shank W-MCDS W-MCDS W-MCDS W-MCDS W-MCDS W-MCDS Packing : 1 pc Straight Shank for percussion drilling Industrial Grade Tungsten Carbide Tip for long life efficient drilling 118 Point Multi-Functional (Hardness 65 ) Bronze Alloy Brazing for superior heat resistance Milled U-shape Flute for fast, efficient removal of drilling dust Hardened Special Alloy Steel Shaft for maximum strength and longer bit life NO. S 94-10X 248 "PROJOBBER" MULTI-FUNCTIONAL DRILL BIT (CHINA) Tungsten carbide-tipped multi purpose drill suitable for drilling tiles, marble, masonry, wood, metal and plastic. Item No. Dia. Size Overall Lgth Packing Price (mm) (mm) (pcs/pack) (pc) X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD X-MFD
8 "ALPEN" TCT / HSS / SDS-PLUS / HOLZ DRILL BIT SETS - Austria NO. S "ALPEN" 5-PC TCT MASONRY DRILL SETS (STRAIGHT SHANK) Item No. Model Description Price (set) TSS5 TSS 5 TCT Drill Set Sizes : 4, 5, 6, 8, & 10 mm Packing : 10 sets/box NO. S "ALPEN" 9-PC HSS / TCT MASONRY DRILL SET Item No. Model Description Price (set) TM91 TM 9/1 HSS / TCT Drill Set HSS Sizes : 3, 4, 5, 6 & 8 mm TCT Straight Shank Sizes : 4, 5, 6 & 8 mm Packing : 10 sets/box NO. S "ALPEN" 5-PC SDS-PLUS DRILL SET Item No. Model Description Price (set) MB5 MB 5 SDS-PLUS Drill Set Sizes : 5.0x110, 6.0x110, 6.0x160, 8.0x160, 10.0x160 mm Packing : 10 sets/box NO. S "ALPEN" 5-PC HOLZ WOOD DRILL SET Item No. Model Description Price (set) TM5 TM 5 HOLZ Wood Drill Set Sizes : 4, 5, 6, 8, & 10 mm Packing : 10 sets/box 244
DIAMOND HSS PRO GLASS & TILE HAMMER DRILL BITS ROTARY DRILL BITS METAL DRILL BITS WOOD DRILL BITS
110 MASONRY DRILLING A DRILL BIT FOR EVERY MATERIAL SPEEDHAMMER PLUS SPEEDHAMMER POWER SPEEDHAMMER MAX MASONRY GRANITE CORDLESS MULTI GLASS & TILE DIAMOND HSS PRO HSS COBALT HSS TIN TCT TURBOMAX STEP DRILL
More informationDIAGER CONTENTS DIAGER. Masonry Drill Sets...13 Chisels...14 Chisel Selection Guide...15 Diager Technical Section
Diager products have been manufactured in France for over 55 years. Diager manufacture an extensive range of premium high end tungsten carbide, masonry cutting tools for the Construction Industry. CONTENTS
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationBosch: Focusing on progress.
Bosch: Focusing on progress. The concrete and masonry range. Hammer and stone drilling, chiselling 2 Overview Bosch Accessories Accessory range Overview Innovative and efficient products ensure successful
More information"STAR-M" WOOD WORKING TOOLS - Japan
Produced from specially alloyed tool steel. Sharp and precisely hardened cutting edges for easy boring, cleaner holes and longer tool life. Designed for heavy-duty work. NO. S 6-1 Item No. Size O.L Twist
More informationYour guide to the right drill bit
Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool
More informationTHECUTTIN MASONRY 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS PAGE
THECUTTIN MASONRY PAGE 42 SDS PLUS BULK 10 PACKS 42 SDS PLUS SETS 34 Alpha_PG_09.pdf 34 23/12/08 11:01:35 AM GEDGE PAGE 36 MASONRY DRILL BITS 38 COUNTERSINK DEPTH GAUGE 39 UNIDRE MASONRY STRAIGHT 39 UNIDRE
More informationHAMMER DRILL BITS PROFESSIONAL WORK MEANS ECONOMICAL WORK HAMMER DRILL BITS. From Pros for Pros 9
PROFESSIONAL WORK MEANS ECONOMICAL WORK 251 SDS-plus MS5 TURBOHEAD Xpro 12 15 252 SDS-plus W2 TURBOKEIL X-Form 16 253 SDS-plus MS5 TURBOKEIL 17 20 255 SDS-plus MS5 VARIO 21 256 SDS-plus hammer drill bit
More informationRange Catalogue
Hawera Customer consultant team United Kingdom Telephone 0870-770-4275 Fax 0870-770-4274 Your specialist retailer: Scintilla AG P.O. Box 632 CH-450 Solothurn info@hawera.de Subject to technical alterations.
More informationRODIA Diamond Core Drilling RODIA Diamond Drill Bits
Space Welding Cold welding process according to cutting-edge bonding technology: Due to the neutral zone the entire diamond segment is used without waste. SPACE WELDING Wet and dry drilling with new technology:
More informationCordless rotary hammer drill 18,0 V CHE 18.0-EC
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400
More informationSDS-PLUS TCT HAMMER DRILL BITS 2-CUTTER
Quick Information Guide -PLUS TCT HAMMER DRILL BITS 2-CUTTER Centering tip Chisel shaped drill head T hree power breakers Core reinforced geometry Enlarged chamfers for improved resistance against rebar
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationLet our professional customer service and product selection improve your bottom line.
We offer a complete line of diamond tools to suit every cutting need, engineered and designed to make the job easier. Let our professional customer service and product selection improve your bottom line.
More information"MOKUBA" TOOLS - Japan
NO. S 13-1 "MOKUBA" FLAT COLD CHISEL A-1 / A-2 Item No. Bit Width Length Packing (pcs) Price 013-01-FCC07 7mm (1/4") 120 12 240 013-01-FCC10 10mm (3/8") 140 12 240 013-01-FCC13 13mm (1/2") 160 12 180 013-01-FCC16
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCustomer Service Plastics & Composites. Nailembedded Nonferrous. Stainless. Drywall / Plaster. Cement Abrasives. Tile & Wood BEST BETTER
Hole Saws Hole Saw SELECTION GUIDE GOOD BETTER BEST Wood 2 Nailembedded wood Nonferrous METAL Plastics & Composites CARBIDE GRIT CARBIDE TIPPED BI-METAL CARBIDE GRIT Metal Stainless Steel Drywall / Plaster
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationTHEHOLEADVANTAGE 2009PRODUCTGUIDE
THEHOLEADVANTAGE 2009PRODUCTGUIDE PANEL&RIVETSTUB&WIREJOBBERSPOTWELD DOUBLEENDEDPANELLONGSERIESSTEPSPEARPOINT SPADEMASONRYSDSHOLESAWSARBORSBROACH DRILLS&EJECTIONPINSINSERTPOWERDRYWALL DOUBLEENDEDPHILLIPS+SLOTDOUBLEENDED
More informationDiamond Tools For The Stone and Construction Industry
Diamond Tools For The Stone and Construction Industry Globally competitive "Industrial" & "Professional" grade tools with advanced technology, superior inputs, and world class manufacturing process. DIAMOND
More informationSelection guide for drills
CAT_BOSCH_2011-02_EN_bosch_production-tools_catalogus_Pneumatic-Tools-for-Industry_Boormachines pagina 1 van 9 6 Drills and rotary hammer Air Tools for Industry Selection guide for drills Choosing a drill
More informationFast Clip & Traklok Jaw Options (Quick Change Jaws)
Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fastclip Clip up Jaws (standard on machine) Part No.: 1640146 28kg to 68kg/m Rail Fastclip Unclip jaw Jaws standard with Fastclip head 47-68 kg/m Rail,
More informationNote. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min
TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3
More informationfischer hammer drill bits Unstoppable.
fischer hammer drill bits Unstoppable. The new fischer hammer drill bit product range Fast Precise Powerful SDS Max Drill bit head with 4 carbide cutting edges Dynamic main cutting edge with chisel-shaped
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationSolid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
More informationDH18DBL. Impact Wrench WR18DSDL. Impact Wrench WR18DBDL. 125mm Circular Saw C18DBL. Reciprocating Saw CR18DSL. Premium Site Bag
Cordless Rotary Hammers The Hitachi Cordless Solution 18V 6.0Ah Get A Set! Get Naked! All Hitachi cordless sets come standard with two batteries, charger and a carry case. This provides you with what you
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More informationall around precision
all around precision PG Mini Small, universal, but above all absolutely precise: PG Mini, a new line of tools and accessories designed to meet every working need. Cutting, sanding, smoothing, drilling,
More informationACCESSORIES CATALOG
ACCESSORIES CATALOG 2017-2018 CONTENT CATEGORY DESCRIPTION PAGE CATEGORY DESCRIPTION PAGE CATEGORY DESCRIPTION PAGE CATEGORY DESCRIPTION PAGE DRILL BITS & CHISELS CORE BITS & CUTTERS ROUTER BIT SETS 55
More informationStandard program. Drilling tools. ...convincing solutions. Measuring tools, Cutting blades
Standard program Drilling tools Measuring tools, Cutting blades...convincing solutions Twist drills Twist drills DIN 338/HSS type N point angle 118, spiral angle 25-35, Ø-tolerance h 8, of HSS, for drilling
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationBONDED BONDED SANDING FLAP DISCS FLAP DISCS BONDED DIAMOND ABRASIVES
DIAMOND BONDED FLAP DISCS FLAP DISCS SANDING BONDED BONDED ABRASIVES www..co.uk PERFORMANCE SO GOOD IT RAISES YOURS DEMAND DeWALT ABRASIVES All of our EXTREME rated bonded abrasives comprise of: A high
More informationMASONRY SPECIALS VALID THRU Nov. 30, 2006
MASONRY SPECIALS VALID THRU Nov. 30, 2006 14 PARTNER K750 CUT-OFF SAW New Dual Charge engine technology provides an extremely powerful engine with low emissions and excellent fuel economy. Includes manual
More informationINNOVATIVE POWER IS OUR QUALITY
INNOVATIVE POWER IS OUR QUALITY P3 MAXXHEAT 3 - in - 1 Multifunctional heater P11 GIRAFFE AIR Telescopic ladder P14 MAXXPACK 18 V 18 V Li-Ion collection Multifunctional: weeder, hot air gun and BBQ lighter
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationGWS 850 C Professional Angle Grinder
Bosch Power Tools tions 2018 GWS 80 C Professional Angle Grinder The lightweight tool with high performance Order the GWS 80 C (1/230 V) to receive special pricing. Powerful 80 watts with Constant Electronics
More informationVJ Technology Construction Fixings & Tools
VJ Technology Construction Fixings & Tools Own Brand Products Our own brand fixings, tools and ancillaries are made to the highest standards n Superior quality n Independently tested n Technically supported
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationPortable Drills & Accessories
SPECIAL FEATURES Portable Drills & Accessories Fast, accurate hole cutting on the job site or in the shop! CS Unitec's portable magnetic drills are ideal for drilling structural steel and virtually any
More informationSelf tapping fasteners for timber batten to concrete and brickwork
Self tapping fasteners for timber batten to and brickwork Self tapping fasteners for and brickwork Technical information TI Material: S = Austenitic stainless steel, grade 304 (European Standard 1.4301)
More informationMax. Drilling Ø. No Load Speed. Description. Specification Chuck Capacity (mm) Max. Drilling Ø Steel (mm) 10. No Load Speed.
DRILL CORDLESS IMPACT DRILL CORDLESS DRILL Li-ion Tech. Equipped with keyless chuck for quick and easy bit changes Forward and reverse knob for easy operation Equipped with adjustable speed, torque and
More informationDRILLING. 55 years of innovation Hitachi Pneumatics APPLICATION GUIDE FOR PNEUMATICS PNEUMATICS 2015 POWER TOOLS CATALOGUE CORDLESS
APPLICATION GUIDE FOR Application N3804AB3 NT50AE2 NT65M2 NT65MA4 NR90AD NV65AF3 NC65AC Furniture and Upholstry Hand and Hobby Crafts Panelling and Picture Framing Shop Fitting and Cabinet Making Finish
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.morrisflex.co.uk Introduction groupuk Morrisflex is an internationally renowned brand of high quality carbide burrs and forms a key part of ATA Group, a privately owned
More informationDrill and Boring Bits, Adapters
800-544-8436 www.guhdo.com rill and Boring Bits, Adapters Hinge Boring Bit T.C. Z2+V2 30103 25 65 8 30103-5-02500-R 30 65 8 30103-5-03000-R 35 65 8 30103-5-03500-R Two raker teeth, centre point and two
More information18mm SDS Plus Rotary Hammer
18mm SDS Plus Rotary Hammer Product Objectives Designed to suit the needs of demolition crews, concreters, builders, electricians plumbers and any looking to undertake masonry drilling Develop 2 new high
More informationBest of Accessories. October December NEW! Bosch Safety Accessories safety at the work place. Concrete and Stone programme.
Best of Accessories October December 2013 Concrete and Stone programme Page 14 22 Promotions Page 23 28 NEW! Bosch Safety Accessories safety at the work place 2 Overview Best of Accessories 4/2013 Table
More informationL-SERIES CLUTCHES L-SERIES CLUTCHES. Getting Started INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
L-SERIES CLUTCHES INSTALLATION INSTRUCTIONS Thank you for purchasing your new L-Series Clutches. They have been custom-made from the highest quality materials. to the dimensions you specified. With the
More informationCONTINUOUS FLIGHT AUGERS AND BITS
Mobile Standard Construction and HEX-COR augers have been tested in the field and independently tested in the laboratory and are proven to be equal to or stronger than any other auger in the industry.
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION PRODUCT P 1 / 15 Model No. Description HR2455 Rotary Hammer 24mm (15/16") L W CONCEPT AND MAIN APPLICATIONS Model HR2455 has been developed as a sister tool to Model HR2450, the Makita
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More information26mm SDS Plus Rotary Hammer
26mm SDS Plus Rotary Hammer Product Objectives Develop a high class product equipped with built in dust extraction vibration absorbing housing and high power output Designed to suit the needs of builders
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationRotary Hammers and Demolition Hammers
50 Professional Blue Power Tools for Trade & Industry Professional Blue Power Tools for Trade & Industry 51 Immense power for the toughest jobs. With the rotary hammers from 2 11 kg and the demolition
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationCarbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationHR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")
TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for
More informationSaint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS
Saint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS SAINT-GOBAIN ABRASIVES The world s leading abrasives manufacturer Saint-Gobain Abrasives, the world s leading manufacturer of abrasives, offers
More informationSAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.4
SAFETY AND OPERATING MANUAL Original instructions 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems
Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast.
Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories
More informationDIAMOND & CBN WHEELS. Diamond & CBN Grinding Wheels SUPER ABRASIVES TYPICAL APPLICATIONS NORTON DIAMOND & CBN WHEELS
Diamond & CBN Wheels Diamond and CBN (Cubic Boron Nitride) grinding wheels are available in a wide range of Resin, Vitrified and Metal bonds. Diamond and CBN wheels are designed to grind very hard materials
More informationHTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards.
2015 2016 Introduction HTR Precision Cutting Tools is a wholly owned black empowered company incorporated for the purpose of manufacturing and supplying precision cutting tools, in response to the growing
More informationOverburden drilling catalogue
Atlas Copco Ground Engineering Products Overburden catalogue Symmetrix overburden systems Overburden Drilling Catalogue Atlas Copco Overburden Drilling System... 3 The Symmetrix System... 4 Drilling overburden...
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationCATALOGUE 2013/2014.
CATALOGUE 2013/2014 www.perles.com Perles. Challenge of professionals. Partner to Professionals since 1936 The Perles brand name was established in 1936 in Switzerland, when Rudolf Weber established company
More informationHAMMERS NEW. 26mm 3 Mode SDS-Plus Hammer NEW NEW. 28mm 3 mode hammer with QCC. 26mm 3 Mode D Handle Hammer NEW NEW
22mm 2 Mode Hammer D25032K*/ D25033K/D25033C 4 to 22 mm in diameter Large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability Electronic
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More informationIndustrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
More informationVERHUUR - VERKOOP - SERVICE LOCATION - VENTE - SERVICE STANLEY HYDRAULIC TOOLS
STANLEY HYDRAULIC TOOLS INHOUDS- OPGAVE SUMMARY INHOUDSOPGAVE PAG HYDRAULIC GRINDER GR29 3 HYDRAULISCHE SLIJPMOLEN GR29-230MM HYDRAULIC DIAMOND CHAIN SAW DS11 - CONCRETE 4 HYDRAULISCHE KETTINGZAAG DS11
More informationIncreased productivity with higher amp hours Our batteries have a higher amp hour rating than most of our competitors. 2.8 amp hours v. 2.
The Right Tool The Right Batter When it comes to making holes on the jobsite, electrical contractors reach for Greenlee s power tool accessories to get the job done whether it be our Nail Eater Auger Bits,
More informationThe New Products Book
Engineered to Perform The New Products ook January 2017 18v Lithium-ion 18v LXT rushless Combi Drill DHP480 DHP484 Max in Steel 13mm Max in Wood 38mm Max in Masonry 13mm Chuck Capacity 1.5 13mm Torque
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationISSUE NO. 13 RANGE FLYER
ISSUE NO. 13 RANGE FLYER www..ae ROTARY DRILLS MAGNETIC DRILL DWD112-B5/DWD112S-B5 D21160-GB D21520-GB/LX DWE1622K-B5 10mm Rotary Drill with Keyed Chuck 10mm Right Angle Rotary Drill 13mm Mixer and Rotary
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationShaping Tools and Power Tool Accessories
Shaping Tools and Power Tool Accessories 1 TABLE OF CONTENTS THE SIMONDS STORY The year was 1832, only 56 years since America s independence. It was in that year that Abel Simonds set up a small workshop
More informationSAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9
SAFETY AND OPERATING MANUAL 2 Original Instructions General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationSolid Carbide Performance Routers
Solid Carbide Routers Manufactured in Manufactured inthe theus US Distributed in Distributed inthe theuk UK Plastics crylic BS luminium PVC Nylon Polypropylene Polycarbonate Solid Carbide 1-Flute O-Flute
More informationDrills for Industrial Maintenance and Repair Applications
Drills for Industrial Maintenance and Repair Applications Dormer Pramet is your one-stop manufacturer with a comprehensive program of rotary and indexable tooling with more than 150 years of industry experience.
More informationCut cooler, faster and longer. only the best
Cut cooler, faster and longer only the best To drill more holes faster! Innovation is part of our daily activity and as a result most of our drill bits present unique features and benefits that will help
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More informationFLEX cordless tools. Sustainable optimum performance
FLEX cordless tools Sustainable optimum performance EC technology allows you to work efficiently, at high power, for a longer time and, importantly, without the need for any maintenance work. The brushless
More informationD Kg Compact Hammer
D25304 2Kg Compact Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions New Parts E13527 E13528 D25304---A R11388 105 Wiring Diagram Marketing Information Main Menu E13582 E13583
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationFabric Studio Custom Roll Shades Installation Instructions
Fabric Studio Custom Roll Shades Installation Instructions Cassette System Battery Motor Lifting System Inside or Outside Mount Thank you for purchasing your new roll shade. It has been custom-made from
More informationONSITE OFFERS ISSUE 40 MARCH /03/ :17
ONSITE OFFERS ISSUE 40 MARCH 2015 PNEUMATIC NAILERS DEWALT Pneumatic Nailers are the result of years of research on the jobsite. Offering the ultimate combination of productivity, reliability and low maintenance,
More informationTRASH PUMP DREDGE/DEWATERING
TP08 TRASH PUMP DREDGE/DEWATERING TP08 PERFORMANCE GRAPH Discharge Head of Water (feet) The TP08 is a heavy duty submersible and self priming hydraulic trash pump with 4" NPT discharge. 0 500 1000 1500
More informationPOWER TOOLS 2017 / 18. The Power in your hands.
POWER TOOLS 2017 / 18 The Power in your hands www.sparky.eu SPARKY GROUP Our company Professionalism & Excellence With over 50 years of manufacturing experience, their own 40 acre European manufacturing
More informationONE TOOL COMPANY 2018 POWER TOOLS
ONE TOOL COMPANY 2018 POWER TOOLS THE LEGACY DRILLS DRILLS KR5010-10 mm 550 W Single Speed Hammer Drill Power Input Chuck Size Speed Impact Rate 550 W 10 mm 2,800 rpm 47,600 bpm Max Drill Capacity Wood
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationD25203K 2 kg Compact Hammer
D25203K 2 kg Compact Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions New Parts Wiring Diagram Main Menu September 2003 M.Chadwick D25203K In Line D handle, 3 Mode, 2kg
More informationSales, Orders and Enquiries. Tel: Fax: Web:
HEAD OFFICE 1 Ramset Drive Chirnside Park, Victoria 3116 STATE BRANCHES VICTORIA 5/71 Victoria Crescent, Abbotsford 3067 1 Ramset Drive, Chirnside Park 3116 SOUTH AUSTRALIA 115 Sir Donald Bradman Drive,
More information