optibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores
|
|
- Herbert Goodwin
- 6 years ago
- Views:
Transcription
1 optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d 400 mm at n = 1500 rpm, for Ø d d > 400 mm at v = 30m/sec. Baancing is carried out minus the key on a smooth mandre. Machines where the rotors are baanced with an adjusting spring inserted in the shaft end must be ordered as foows: Baanced with finished bore key on a smooth mandre inserted spring. We recommend baancing in two panes grade G 16 or better if v 30 m/sec. or if the ratio between datum diameter and puey face width d d : b 2 < 4 at v > 20 m/sec. Surcharges for baancing on request. Pease give puey operating speed. We reserve the right to make technica changes. Surcharges for finished bore H7 and keyway to DIN 6885 part 1 Quantity bore up to 30 mm bore 31 mm to 50 mm bore 51 mm to 75 mm Dried and tapped for setscrews 1 to 2 3 to 5 6 to to to 50 over 50 Specia pueys and custom designed pueys on request. ARNTZ OPTIBELT GROUP, GERMANY 5
2 optibet KS V-Grooved Pueys for Bushings Profie SPZ No. No. TB SPZ / * * * * * * * * * * * * * ARNTZ OPTIBELT GROUP, GERMANY
3 optibet KS V-Grooved Pueys for Bushings Profie SPZ No. No x x x x x * * x * * x x x x x x * * x * x x x x x * x * * x * x x x x x * * x * * x x x * x * x x * x x x * x * x x z Face width b x x x x * x * x x x x x x * x Bore d 2 from... to Soid puey Pate puey (with or hoes) x Spoked puey ony for profie 10 Materia: EN-GJL DIN EN 1561 * Non stock items Bore diameters d 2 see page 4 ARNTZ OPTIBELT GROUP, GERMANY 7
4 optibet KS V-Grooved Pueys for Bushings Profie SPA No. No. TB SPA / x ARNTZ OPTIBELT GROUP, GERMANY
5 optibet KS V-Grooved Pueys for Bushings Profie SPA No. No. 1 x x x x x x x x x x x x x x x x x x x x x x x x x z x Face width b x x x x x Bore d 2 from... to x x x x x x Soid puey Pate puey (with or hoes) x Spoked puey ony for profie 13 Materia: EN-GJL DIN EN 1561 Bore diameters d 2 see page 4 ARNTZ OPTIBELT GROUP, GERMANY 9
6 optibet KS V-Grooved Pueys for Bushings Profie SPB No. No. 100 TB SPB / x x ARNTZ OPTIBELT GROUP, GERMANY
7 optibet KS V-Grooved Pueys for Bushings Profie SPB No. No x x x x x x x x x x x x x * x x x x x x x x x x x x x x x x * x x x x x x x x x x * x x x x x x x x x x * x x x x x x x * x x x x x x x * x x x x x * x x x x * x ARNTZ OPTIBELT GROUP, GERMANY 11
8 optibet KS V-Grooved Pueys for Bushings Profie SPB No. No. 3 x x x x x * x x x x x x * x x x x x x * x z Face width b Bore d 2 from... to Soid puey Pate puey (with or hoes) x Spoked puey Materia: EN-GJL DIN EN 1561 ony for profie 17 * Non stock items Bore diameters d 2 see page 4 12 ARNTZ OPTIBELT GROUP, GERMANY
9 optibet KS V-Grooved Pueys for Bushings Profie SPC No. No. TB SPC / * x x x * x x * x x x * x x x * x x x x * * x x x x x * ARNTZ OPTIBELT GROUP, GERMANY 13
10 optibet KS V-Grooved Pueys for Bushings Profie SPC No. No. 3 x x x x x * x x x x x * x x x x x * x x x * x x x * z Face width b Bore d 2 from... to Soid puey Pate puey (with or hoes) x Spoked puey Materia: EN-GJL DIN EN 1561 ony for profie 22 * Non stock items Bore diameters d 2 see page 4 14 ARNTZ OPTIBELT GROUP, GERMANY
11 optibet KS V-Grooved Pueys for Pain Boring Profie SPZ SPZ / x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x z 1 3 x Face width b Soid puey Pate puey (with or hoes) x Spoked puey ony for profie 10 position: one side fush Materia: EN-GJL DIN EN ARNTZ OPTIBELT GROUP, GERMANY 15
12 optibet KS V-Grooved Pueys for Pain Boring Profie SPA SPA / x x x x x x x x x x x x x x x ARNTZ OPTIBELT GROUP, GERMANY
13 optibet KS V-Grooved Pueys for Pain Boring Profie SPA 1 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x z x x x x x x Face width b Soid puey Pate puey (with or hoes) x Spoked puey ony for profie 13 position: one side fush Materia: EN-GJL DIN EN 1561 ARNTZ OPTIBELT GROUP, GERMANY 17
14 optibet KS V-Grooved Pueys for Pain Boring Profie SPB SPB / x x x x x x x x x x ARNTZ OPTIBELT GROUP, GERMANY
15 optibet KS V-Grooved Pueys for Pain Boring Profie SPB 1 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x z Face width b Soid puey Pate puey (with or hoes) x Spoked puey ony for profie 17 position: one side fush Materia: EN-GJL DIN EN 1561 ARNTZ OPTIBELT GROUP, GERMANY 19
16 optibet KS V-Grooved Pueys for Pain Boring Profie SPC SPC /22 1* * * x * x * x * * * * x * x * x * * * x * x * * x * * * * x * x * x * * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x z Face width b * x * x * x * x * x * x * x Spoid puey Pate puey (with or hoes) x Spoked puey * Non stock items position: one side fush Materia: EN-GJL DIN EN ARNTZ OPTIBELT GROUP, GERMANY
Finer stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes.
V-Belt Pulley Finer stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes. V-BELT PULLEY Finer pulleys under go stringent
More informationSIT V-Pulleys V-PULLEYS.
www.sitspa.co SIT V-Pueys on the arket there are various s V-bets, aong which, the ost 'wiesprea are: narrow Sp-Spa-Spb-Spc (iso4184 - Din 7753) cassic -a-b-c (iso 4184 - Din 2215) aerican narrow 3V-5V
More information... Dm mm. ... Dm mm... Dm mm. SPA TAPER BUSH PULLEYS...Dm mm... Dm mm... Dm mm...
Index V-belt pulleys for Taper ushes V-belt pulleys for Taper bushes... SPZ TAPER USH PUEYS...Dm 50-100 mm... Dm 106-170 mm... Dm 180-355 mm... Dm 400-800 mm SPA TAPER USH PUEYS...Dm 63-112 mm... Dm 118-190
More informationHSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationCenter drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationoptibelt ALPHA TORQUE
t Profiles: ß s ht h s T2.5, T5, T10, MXL, XL, L t Profiles: ß h t h s AT5, AT10 s optibelt ALPHA TORQUE POLYURETHANE TIMING BELTS ß s s ß t t h t h t h s1 Profiles: DT5, DT10 maintenance-free, with steel
More informationTaper Lock Pulleys for Z, SPZ, XPZ & QXPZ Belts
3 Taper Lock Pulleys for Z, SPZ, XPZ & QXPZ Belts 031Z0041 56 1 1008 25 1 9 49 28 13 22 60 Z0042 56 2 1108 28 1 1 /8 9 49 35 27 22 60 031Z0051 60 1 1008 25 1 9 22 22 64 Z0052 60 2 1108 28 1 1 /8 9 28 36
More informationShaft Mounted Speed Reducer. Technical Catalogue
Shaft Mounted Speed Reducer Technical Catalogue Where others fit, We perform Contents The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationPOWER TRANSMISSION OIL & GAS
POWER TRANSMISSION OIL & GAS PRODUCTS SPECIALISTS For trouble-free operations. Norbert, 42, engineer WORLDWIDE PARTNER Optibelt provides its customers and corporate partners with engineered drive solutions
More informationGT 2 Timing Belt Pulleys - 3 mm Pitch
GT Timing Bet Pueys - mm Pitch PROFIE AUMINUM OUBE OR NO FANGE / 7.0 /. / MATERIA: Auminum Aoy FINIH: Cear Anoize Cataog Number A AM0F00 A AM07F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00
More informationPOWEr TrANSMISSION INSTALLATION & MAINTENANCE
POWEr TrANSMISSION INSTALLATION & MAINTENANCE 2 rue Claude MONNET 70000 VESOUL Installation and Maintenance Instructions Safety: Before the beginning of any maintenance work, make sure that all machine
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationPOWER TRANSMISSION ROAD CONSTRUCTION
POWER TRANSMISSION ROAD CONSTRUCTION PRODUCTS SPECIALISTS So it holds together well. Norbert, 42, foreman USED WORLDWIDE As a strong partner in the road construction industry, Optibelt not only understands
More informationPOWER TRANSMISSION ROAD CONSTRUCTION
POWER TRANSMISSION ROAD CONSTRUCTION PRODUCTS SPECIALISTS FOR ASPHALT So it holds together well. Norbert, 42, foreman OPTIBELT SUCCESS STORY OPTIMAL PERFORMANCE UNDER EXTREME CONDITIONS The industrial
More informationADJUSTABLE PITCH SERIES
ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available
More informationPrestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
More informationPower Transmission Product Range
Power Transmission Product Range Naismith Engineering & Manufacturing Co P/L www.naismith.com.au Melbourne 149 Heidelberg Rd Northcote, Victoria Australia, 3070 Ph (03) 9489 9811 Fax (03) 9482 1474 Sydney
More informationTownsend Bearings. Rosta Tensioner Devices. Revision 1
Townsend Bearings Rosta Revision 1 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More information60 Drive Design & Maintenance Manual FRICTION BELT DRIVES. Max. Bore Pulley F J K L M N Outside Code Dia (P) Grooves No. Metric Inch Type Dia (O)
Catalogue Pitch No. of Bush Max. Bore Pulley F J K L M N Outside Code Dia (P) Grooves No. Metric Inch Type Dia (O) 031Z0041 56 1 1008 25 1 9 49 28 13 22 60 Z0042 56 2 1108 28 1 1 /8 9 49 35 27 22 60 031Z0051
More informationMATERIAL HANDLING FOOD & BEVERAGE
MATERIAL HANDLING FOOD & BEVERAGE PRODUCTS SPECIALISTS Always a clean solution. Paul, 46, head of engineering design PU konform nach EU-Verordnung 10/2011 und FDA IN WORLDWIDE USE As an experienced partner
More informationShaft Mounted Speed Reducers
s Metric Range Features The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance in the harshest of applications. Shaft mounted drives
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationHydraulic notching machines
Notching & punching Hydrauic notching machines MRA Manua pipe notcher XXFor notching pipes up to 4.5 mm wa thickness XXUp to three pipe diameters can e notched (MRA 2) XXCan e used oth horizontay and verticay
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationDIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
More informationShaft Mounted Speed Reducer Selection
GEARBOX SELECTION PROCEDURE (a) Service Factor From Table 1 select the service factor applicable to the drive. (b) Design Power Multiply the absorbed power (or motor power if absorbed power not known)
More informationCODED SWITCHES SPACERS PART NO. PART NO. SCREWS FOR FIELD ASSEMBLY OF THUMBWHEEL SWITCHES (2 screws needed per assembly nuts)
3P SERIES,.100 THK. (Makes section pitch.400 ) 663602000 663609000 3 SERIES FRONT MOUNT, FITS TYPE 0 & 3,.078 THK. (Makes section pitch 10mm) 410802000 410809000 3 SERIES REAR MOUNT, FITS TYPE 2,.150 THK.
More informationModel PHS (Female Threading Type)
Mode PHS (Femae Threading Type) φ φ Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 W D 1 D 2 B L D JIS Cass 2.1.2.1 PHS 5 35 16 8 M5.8 9 9 11 6 PHS 6 39 18 9 M6 1 11
More informationProdukte & Anwendungen Products & Applications. Profile Sections. Antriebslösungen mit Optibelt Drive solutions with Optibelt
Produkte & Anwendungen Products & Applications e Sections Antriebslösungen mit Optibelt Drive solutions with Optibelt e Sections Kraftschlüssige Leistungsübertragung Frictional Power Transmission Formschlüssige
More informationGatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
PITFALLS OF INTERCHANGING U.S. AND METRIC STANDARD V-BELTS Walter T. Nawrocki Power Transmission Design Magazine September 1995 Specification numbers for V-belts manufactured to different international
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationP r o d u c t R a n g e > > >
Product Range > > > Wrapped V-Belts Kraftbands Raw Edge V-Belts Kraftbands Chloroprene Timing Belts Polyurethane Timing Belts 1 2 3 4 8 optibelt RED POWER 3 High performance wedge belts, 8 optibelt BLUE
More informationAir nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...
Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX
POWER TRANSMISSION FLEXIBLE COUPLINGS 2 FLEXIBLE COUPLINGS Orpex copings are ses compensation copings everywhere where an absotey reiabe torqe transfer is reqired. Orpex copings cover with their types
More informationGEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationProducts & Applications. Cement manufacture- Drive solutions with Optibelt products
Products & Applications Cement manufacture- Drive solutions with Optibelt products Cement manufacture optibelt RED POWER II optibelt Super X-POWER Hammer Crusher Hydraulic Digger Electric Filter Filter
More informationOur policy is one of continuous research and development. We therefore reserve the right
Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can
More informationS.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1
NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer
More informationn Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
More informationAny switch configuration
Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro
More informationDisplacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2
Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................
More informationInnovation. Simplicity. is Simply Better. Rotary Lobe Pumps
Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationGEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationOPTIBELT PRODUCT RANGE
OPTIBELT PRODUCT RANGE OVERVIEW OF ALL PRODUCTS VERSION 1 / 2013 INCLUDING PULLEYS AND BUSHES Page 2 HigH-TECH machinery REQUiRES HigH-TECH DRiVE TECHnOLOgY. Since 1948 the OPtibelt company has been manufacturing
More informationDisplacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1
Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationC-Line Linear guide system
www.bergab.ru adea S.r.. adea GmbH Via Meette, 16 20128 Miano Te. +39 02.27.093.297 Fax +39 02.25.51.768 Internet: www.nadea.it E-Mai: customer.service@nadea.it Rudof-Diese-Straße 28 71154 ufringen Te.
More informationEngineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets
CHAIN & PULLEY TENSIONERS Engineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets ENGINEERING DATA TENSIONING TECHNOLOGY Chain & V-Belt Tensioning Roller chains are power transmission
More informationLintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting
Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationLocker and cloakroom furniture
Locker and coakroom furniture F urnishing with stee furniture Take a ot of wear and tear! Assembed box ockers S 4000 The sturdy cassic ockers with many different compartment sizes... Durabe stee structure
More informationSlide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
More informationProducts & Applications. CarPOWER. Drive solutions with Optibelt
Products & Applications CarPOWER Drive solutions with Optibelt optibelt CarPOWER High technology from original equipment manufacturer! Ribbed Belts RBK Timing Belts ZRK V-belts MARATHON 1 Repair Sets KIT
More information3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
More informationRubber V-BELTS LINEA-X ESAFLEX VARISECT XDV2 CONTRAFOR PLURIBAND
MEGADYNE Rubber ISORAN TIMING BELTS Rubber Timing belts are available in single or double sided version, in classical pitches and RPP profiles. A large range of products available from stock. MXL - XL
More information6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
More informationKENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
More informationAirfincoolers Spare Parts Catalog KELVION NANTES SPARE PARTS OFFER FOR PROCESS AIRFINCOOLERS
KELVION NANTES SPARE PARTS OFFER FOR PROCESS AIRFINCOOLERS 0 Kelvion Thermal Solutions / Services presentation BASICS OF AIR COOLED HEAT EXCHANGERS Plenum Chamber Fan Bundle Bearing Header Shaft Belt &
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units
-GROUP - DRIVE-TECHNOLOGY GROUP KG bevel shaft mounting right angle gear units -GROUP Headoffice Sitz der Maschinenbau GmbH Neue Reihe 44 D - 38162 Schandelah - Germany phone: +49/(0)5306-9221-0 fax: +49/(0)5306-9221-50
More informationV Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
More informationTypes and operating description
22 Flexible jaw and pin & bush couplings 24 69 70 71 72 Selection of standard IEC motors Type PKZ, two-part and PKD, three-part Type PKA, drop-out center design coupling Displacements / elastomer sets
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationAbsorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationSIT BANDED - Narrow (ISO) SPZ - SPA SPB - SPC XPZ - XPA XPB - XPC V-BELTS - BANDED ISO APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL
SIT BANDED - Narrow (ISO) E MC SPZ - SPA SPB - SPC XPZ - XPA XPB - XPC APPLICATIONS For shock loads applications, ideal for pulsating loads, high capacity drives and for short-center, heavy-duty drives.
More informationP0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1
Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4
More informationRT 100 T NEW. Solid carbide spiral-flute deep hole drills for drilling depths up to 40 x D. Now up to 40 x D. Made by Guhring
Soid carbide spira-fute deep hoe dris for driing depths up to 40 x D NEW Now up to 40 x D Made by Guhring ex-stock range Avaiabe ex-stock now: The spirafute deep hoe dri. The program incudes standard dris
More informationSize 00 Size 0-5 Size 6-8. Technical Data. Setscrew 1TF 2TF 3TF 3) 2) R Pilot bore max.
Standard for a torque range up to 6800 Nm Standard zinc-coated and yellow passivated ting possible while in place Asbestos-free and rust-resistant friction linings Securing of the setting nut by locking
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationExtremely uniform liquid distribution Wide flow rate range Large number of available spray angles
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationPUSH BUTTON BOXES AND TERMINAL BOXES
EN PUSH BUTTON BOXES AND TERMINA BOXES PUSH BUTTON BOXES AND TERMINA BOXES 4 PUSH BUTTON BOX MODE APH 8 12 TERMINA BOX MODE ADH slotted and hex screws supplied loose silicone gasket in compliance with
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationMETRIC BALL SCREW JACKS
METRIC BA METRIC BA With over twenty-five years of experience manufacturing precision worm gear screw jacks, Nook Industries has expanded the ActionJac offering to include metric models providing design
More informationACTA-BACK CONTOUR ORDER FORM
ACTA-BACK CONTOUR ORDER FORM PRICING IN CANADIAN DOARS Company Name/ACCT #: Acta-Back Contour 5 Shown with Compass 4 Quick Release 2 Point Hardware. Cover appearance may vary with hardware selection. Acta-Back
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationHTD Pulley & Belt Drives
HTD Pulley & elt Drives HTD timing belts offer optimised load distribution through the rounded tooth form, guaranteeing high power transmission in low speed and high torque applications. apable of transmitting
More informationCHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES)
CHECK VAVES DUA PATE CHECK VAVES (DC SERIES) NOZZE CHECK VAVES (NC SERIES) eading Korean valve manufacturer DUA PATE CHECK VAVE (DC SERIES) Range Size Fluid Application 1 1/2 (40A) ~ 84 (2100A) Water,
More informationIndustrial rivets according to DIN
Industrial rivets according to DIN 134 Industrial rivets according to DIN Industrial rivets Industrial rivets according to DIN are the classical one-piece type of rivets that are handled both-sided of
More informationTreated steel insert. PF: Black Duroplast FS 31 DIN 7708.
1 1 3 1 S F O U R S P O K E S N W E E L W I T S O O T O L E U B oe e 2 h4 h olor 113110601 100 31 5,25 20 18 26 30 16 13,5 Black 113112601 125 37 8 25 28 32 40 22 14 Black 113115601 150 50 10 30 30 55
More informationLQLR Fan. Installation instruction. Outlet: Installation. Inlet:
Installation : LQLZ-04 Protective screen LQLZ-03 counterflange LQLZ-01 flexible connection LQLZ-02 connection piece Inlet: Fig. 1 LQLZ-09 damper LQLZ-06 connection piece LQLZ-05 flexible connection LQLZ-07
More informationParting Line Interlocks
144 Innovative old Interlocks Parting ine Interlocks For accurate alignment between mold halves ll machining can be done from the parting line saving set-up time and machining costs Components can be purchased
More informationCURRIES Tech Manual Door Section. Revised June, 2017
CURRIES Tech Manual Door Section Revised June, 2017 i Index August, 2016 DESCRIPTION PAGE(S) 2-1/4 Thick Door...137 Astragals Flat...89 h Type...125 Z Type...90 Behavioral Healthcare Patient Room Access
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationKRS-819. parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet. Tsurumi Europe GmbH
KRS-89 parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429 Heltorfer
More informationROSTA Tensioner Devices
OSTA Maintenance-free tensioner systems for belt and chain drives Easy to install available in 7 standard sizes wide range of accessories available Customer Benefits from using OSTA SE Guarantees the lowest
More informationReduction ratio. Factor 1)
Max. valve torque to [Nm] 90,000 63,000 125,000 125,000 64,000 250,000 250,000 Valve Flange according to EN ISO 5211 F40 200 F48 250 F60 315 Gearbox/primary Factor 1) Gearbox Turns for 90 Input shaft 2)
More informationPRODUCTS AND APPLICATIONS AGRO POWER
PRODUCTS AND APPLICATIONS AGRO POWER AGRO POWER V-belts Kraftbands Ribbed belts Variable speed belts Owner of any and all copyrights and intellectual property rights as well as other rights of use and
More informationCatalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement
atalog No. 12118E Micro Micro Series PED 2014/68/EU OMPIANT Ideal for oil Spring Replacement Micro Series Introduction DADO produces top quality products at competitive prices and provides a superior level
More informationModular Acoustic Enclosures
Moduar Acoustic Encosures 225 375 kva Range www.fgwison.com The innovative and functiona design of the 225 375 kva range encosures ensures performance in the harshest of environments. Extremey durabe and
More information