SSS SGG SSG SOG SOS SOF SOJ SOSL
|
|
|
- Amber Randall
- 6 years ago
- Views:
Transcription
1
2 Single Leg Types: S and C CO SSS SGG SSG SOG SOS SOF SOJ SOSL Models: CO Single leg alloy chain sling with alloy master link each end SSS Single leg alloy chain sling with sling hook each end SGG Single leg alloy chain sling with grab hook each end SSG Single leg alloy chain sling with sling hook one end and grab hook other end SOG Single leg alloy chain sling with master link one end and grab hook other end SOS Single leg alloy chain sling with master link one end and sling hook other end SOF Single leg alloy chain sling with master link one end and foundry hook other end SOJ Single leg alloy chain sling with master link one end and J-hook other end SOSL Single leg alloy chain sling with master link one end and self locking hook other end Grade 80 alloy standard on 7/32", 1", and 1-1/4" Hook latch optional on SSS, SSG, and SOS models Nominal Material Width Chain MM Grade 7/32" /32" 1-1/2" 3" 2,100 9/32" /64" 2-1/2" 5" 4,300 3/8" /16" 3" 6" 8,800 1/2" /8" 4" 8" 15,000 5/8" /8" 4" 8" 22,600 3/4" /4" 4" 8" 35,300 7/8" /8" 5-1/4" 10-1/2" 42,700 1" /4" 6 12" 47, /4" " 7 14" 72,300 SOJ model has a maximum rated capacity of 3,600 lbs. and should only be made using 9/32" or 3/8" alloy chain sizes SOSL model only available in 9/32", 3/8", 1/2", 5/8", 3/4", 7/8", and 1" sizes Slings 17
3 Double Leg Type: D DOG Double leg alloy chain sling with master link one end and grab Hook latches optional on DOS model Chain MM Grade DOS Double leg alloy chain sling with master link one end and sling DOF Double leg alloy chain sling with master link one end and foundry Nominal Material Width () 9/32" /64" 2-1/2" 5" 7,400 6,100 4,300 3/8" /16" 3" 6" 15,200 12,400 8,800 1/2" /8" 4" 8" 26,000 21,200 15,000 5/8" /8" 4" 8" 39,100 32,000 22,600 3/4" /4" 4" 8" 61,100 49,900 35,300 7/8" /8" 5-1/4" 10-1/2" 74,000 60,400 42,700 1" /4" 6 12" 82,600 67,400 47, /4" " 7 14" 125, ,200 72,300 DOSL model only available in 9/32", 3/8", 1/2", 5/8", 3/4", 7/8", and 1" sizes 60 DOSL Double leg alloy chain sling with master Link one end and self locking hooks other end Slings 18
4 Triple and Quadruple Leg TOG Triple Leg alloy chain sling with master link one end and grab TOS Triple leg alloy chain sling with master link one end and sling TOF Triple leg alloy chain sling with master link one end and foundry TOSL Triple leg alloy chain sling with master link one end and self locking (Feet - In) QOG Quadruple leg alloy chain sling with master link one end and grab QOS Quadruple leg alloy chain sling with master link one end and sling QOF Quadruple leg alloy chain sling with master link one end and foundry QOSL Quadruple leg alloy chain sling with master link one end and self locking Hook latches optional on TOS model Chain MM Grade Nominal Material (lbs.) Width 9/32" /16" 3" 6" 11,200 9,100 6,450 3/8" /8" 4" 8" 22,800 18,600 13,200 1/2" /4" 4" 8" 39,000 31,800 22,500 5/8" /8" 5-1/4" 10-1/2" 58,700 47,900 33,900 3/4" /8" 6" 12" 91,700 74,900 53,000 7/8" /4" 8" 16" 110,900 90,600 64,000 1" /4" 8" 16" 123, ,200 71, /4" /4" 9" 16" 187, , ,400 TOSL model only available in 9/32", 3/8", 1/2", 5/8", 3/4", 7/8", and 1" sizes Slings 19
5 Single Adjustable Type: SA SAA Single leg adjustable chain sling with master link and style A adjuster, with sling hook other end SAB Single leg adjustable chain sling style master link and style B adjuster, with sling hook other end Hook latches optional Chain MM Grade Nominal Material at 90 Width 9/32" /64" 2-1/2" 5" 4,300 3/8" /16" 3" 6" 8,800 1/2" /8" 4" 8" 15,000 5/8" /8" 4" 8" 22,600 3/4" /8" 5-1/4" 10-1/2" 35,300 7/8" /8" 5-1/4" 10-1/2" 42,700 1" /4" 6" 12" 47, /4" " 7" 14" 72,300 Slings 20
6 Single Adjustable Loop Type: SAL SALA Single leg adjustable loop chain sling with master link and style A adjuster, blank other end SALB Single leg adjustable loop chain sling with master link and style B adjuster, blank other end Chain MM Grade Nominal Material at 60 Width 9/32" /64" 2-1/2" 5" 7,400 3/8" /16" 3" 6" 15,200 1/2" /8" 4" 8" 26,000 5/8" /4" 4" 8" 39,100 3/4" /8" 5-1/4" 10-1/2" 61,100 7/8" /8" 6" 12" 74,000 1" " 7" 14" 82, /4" /4" 8" 16" 125,200 Slings 21
7 Double Adjustable Type: DA DAA Double leg adjustable chain sling with master link and style A adjuster, with sling DAB Double leg adjustable chain sling with master link and style B adjuster, with sling Hook latches optional Chain MM Grade Nominal Material at 60 Width 9/32" /64" 2-1/2" 5" 7,400 3/8" /16" 3" 6" 15,200 1/2" /8" 4" 8" 26,000 5/8" /4" 4" 8" 39,100 3/4" /8" 5-1/4" 10-1/2" 61,100 7/8" /8" 6" 12" 74,000 1" " 7" 14" 82, /4" /4" 8" 16" 125,200 Slings 22
8 Double Adjustable Loop Type: DAL DALA Double leg adjustable loop chain sling with master link and style A adjuster, blank other ends DALB Double leg adjustable loop chain sling with master link and style B adjuster, blank other ends Chain MM Grade Nominal Material at 60 Width 9/32" /16" 3" 6" 11,200 3/8" /8" 4" 8" 22,800 1/2" /4" 4" 8" 39,000 5/8" /8" 5-1/4" 10-1/2" 58,700 3/4" /8" 6" 12" 91,700 7/8" /4" 8" 16" 110,900 1" /4" 8" 16" 123, /4" /4" 9" 16" 187,800 Slings 23
9 ALLOY CHAIN SLING S When you inspect an alloy chain sling, it shall be taken out of service immediately and returned for repair or replacement when any of the below defects are present. Missing or illegible sling identification (tag) Cracks or breaks to any part of the sling Lack of ability of chain or components to hinge freely Excessive wear, nicks, or gouges Weld Splatter Stretched chain links or components Bent, twisted, or deformed chain links or components Damaged hooks per ASME B30.10 Evidence of heat damage Excessive pitting or corrosion Damaged rigging hardware per ASME B30.26 and Any condition that causes doubt about the continued use of the sling Temperature F C Reduction of WHILE at Temperature Grade of Chain Grade 80 (System 8) Grade 100 (System 10) Reduction of Rated Capacity AFTER EXPOSURE to Temperature Reduction of Reduction of AFTER WHILE EXPOSURE at Temperature to Temperature <400 <204 None None None None % None 15% None % None 25% 5% % 5% 30% 15% % 10% 40% 20% % 15% 50% 25% % 20% 60% 30% % 25% 70% 35% >1000 >538 OSHA requires that any chain sling which has experienced temperatures in excess of 1000 F be removed from service. Sources: ASME B30.9 Slings Standard OSHA Slings OSHA Rigging Equipment for material handling Campbell Material Handling Products catalog, August Slings 45
General Information/Alloy Chain and Slings
General Information/Alloy Chain and Slings Performance Characteristics of Chain Slings Safeway Gold Standard Alloy Chain Slings utilize grade 80, 100 and 120 lifting chain, manufactured from special analysis
Maximum Work Load [lbs] of Various Chain Sling Applications
![Maximum Work Load [lbs] of Various Chain Sling Applications](/thumbs/80/81377967.jpg "Maximum Work Load [lbs] of Various Chain Sling Applications")
pewag Maximum Work Load [lbs] of Various Sling Applications Factor 4: Grade 20 Alloy Winner Pro Grade 00 Alloy Winner Grade 80 Alloy Grade 50 Stainless Steel.7.7.7.7.4.4.4.4 2. 2. 2. 2..45.45.45.45 NI720
Grade 80 & 100 Alloy Chain
Grade 80 & 100 Alloy Chain General Information WORKING LOAD LIMIT The Working Load Limit is the maximum load in pounds which should ever be applied to chain, when the chain is new or in as-new condition,
WEIGHT CONTENTS SIZE DESCRIPTION WORKING LOAD LIMIT
rade Chain LENTH S0606 3/8 6 8,800 lbs. 12.5 lbs. S0608 3/8 8 8,800 lbs. 15.5 lbs. S0610 3/8 10 8,800 lbs. 18.5 lbs. S0616 3/8 16 8,800 lbs. 27.3 lbs. S0620 3/8 20 8,800 lbs. 33.3 lbs. S0806 1/2 6 15,000
6-A SECTION INDEX
Buffalo - Headquarters: 71.82.23 FAX: 71.82.4412 SECTION INDEX SECTION ALUMINUM Chain...-20 BINDER Chain Assemblies...-19 (Grade 70) Chain...-18 CHAIN Adjuster, Tire...-22 Aluminum...-20 Attachments...-17
CHAIN SLING USAGE 2, 3 ORDERING SLINGS AND CHAIN STYLES 4 GRADE 80 WORKING LOAD LIMITS 5, 6 GRADE 80 CHAIN AND ATTACHMENTS 7-17
TABLE OF CONTENTS CHAIN SLING USAGE 2, 3 ORDERING SLINGS AND CHAIN STYLES 4 GRADE 80 WORKING LOAD LIMITS 5, 6 GRADE 80 CHAIN AND ATTACHMENTS 7-17 EUROPEAN GRADE 80 CHAIN ATTACHMENTS 18-23 GRADE 100 CHAIN
Vanguard Steel Ltd. Grade 100 Lifting
Vanguard Steel Ltd Grade 100 Lifting GRADE 100 ALLOY TABLE OF CONTENTS Page Chain 1 Clevis Grab Hook 3 Clevis Slip Hook 4 Connecting Links 2 Master Link 5 Master Link Sub-Assembly 6 SC Clevis Hook 7 SL
CHAIN SPECIFICATIONS
CHAIN SPECIFICATIONS Peerless, the Largest U.S. Chain Manufacturer Peerless Chain, established as a manufacturer of tire chains in 1917 eventually expanded into hardware and industrial chain manufacturing,
Toll Free: Website:
Tire Chains Industrial Chains Chain Accessories Toll Free: 800-247-2400 Website: www.centralsands.com Passenger Vehicle TIRE CHAINS Regular Highway Service Bar Reinforced (Packed four pair per master carton
GRADE 8O ALLOY STEEL CHAIN CARE, USE & INSPECTION OF GRADE 80 CHAIN & SLINGS
GRADE 8O ALLOY STEEL CHAIN CARE, USE & INSPECTION OF GRADE 80 CHAIN & SLINGS CARE 1. WORKING LOAD LIMIT - Select the proper size chain for the job keeping within the working load limits shown. The angle
Technical Manual. Inspection Record For: Hoist Model No.: Hoist Serial No.: Hoist Inspection and Maintenance Guide
CPTEN-136 Technical Manual Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model No.: Hoist Serial No.: WARNING! Failure to follow these inspection procedures can cause personal injury
Care, Use & Inspection
Care, Use & Inspection The life and strength of erc-alloy 1000 chain slings depend on proper inspection, maintenance and use. For additional information, refer to ASE 30.9 and OSA 1910.184. Care Chain
Care, Use & Inspection Herc-Alloy 800 Chain...35 Herc-Alloy 800 Slings Herc-Alloy 800 Components Master Link...
are, Use & Inspection....................... 34 Herc-lloy 800 hain.........................35 Herc-lloy 800 Slings......................36-37 Herc-lloy 800 omponents................38-39 Master Link................................40
Alloy Chain Slings WIRE ROPE LP. HOW TO ORDER THE PROPER CHAIN SLING When ordering, please be sure to include the following:
Chain WIRE ROPE LP Alloy Chain Slings HOW TO ORDER THE PROPER CHAIN SLING When ordering, please be sure to include the following: SIZE means diameter of the material from which the link of the body chain
Chain & Accessories CHAIN & ACCESSORIES. With Product Warning and Application Information
& Accessories CHAIN & ACCESSORIES With Product Warning and Application Information CROSBY ELIMINATOR LOOK TO THE CROSBY PLATINUM LINE FOR PREMIUM SLING RIGGING The Top ELIMINATOR Advantages Over The Competition
Provided by: Operating, Maintenance & Parts Manual
Provided by: www.hoistsdirect.com TB681.qxd 11/29/2004 3:04 PM Page 1 Operating, Maintenance & Parts Manual TB603 Manually Lever Operated Chain Hoist 1100 POUNDS MAXIMUM CAPACITY (500 kg) Follow all instructions
SLINGS NYLON SLINGS NYLON SLINGS TWIN PATH SLINGS WIRE ROPE SLINGS CHAIN SLINGS. Your Sling and Rigging Specialists!
A N D Hanes Supply of South Carolina, Inc. DBA Coastal Construction Industrial Supply Co. SLINGS Your and Rigging Specialists! NYLON SLINGS NYLON SLINGS TWIN PATH SLINGS WIRE ROPE SLINGS CHAIN SLINGS HEADQUARTERS/BUFFALO:
THE PLATINUM LINE SETTING THE STANDARD FOR PREMIUM CHAIN FITTINGS. Featuring: CROSBY SPECTRUM 10 GRADE 100 CHAIN FITTINGS
THE PLATINUM LINE SETTING THE STANAR FOR PREMIUM CHAIN FITTINGS Featuring: CROSBY SPECTRUM 10 GRAE 100 CHAIN FITTINGS Scan this QR Code with your smart device to view this brochure electronically. Crosby
Care, Use & Inspection Herc-Alloy 1000 Chain...19 Herc-Alloy 1000 Slings Herc-Alloy 1000 Components Master Link...
Care, Use & Inspection....................... 18 erc-alloy 1000 Chain........................19 erc-alloy 1000 Slings.....................20-21 erc-alloy 1000 Components...............22-23 aster Link................................24
AWRF Associated Wire Rope Fabricators
AWRF Associated Wire Rope Fabricators Recommended Practice and Guideline Disclaimer for version of AWRF Recommended Guideline for Proof Test Procedures for Slings Part I: Alloy Chain Slings Associated
Content. Super Alloy G 80 Quality tested for your safety. Super Alloy Grade 80 37
Content Super Alloy Grade 80 37 Characteristics of Super Alloy G 80 38 Sling Examples 39 Synoptical Table of Available Products 40-41 Super Alloy 42 Super Alloy G 80 Working s 42 Master Links, Sub-Assemblies
PWB Anchor Grade 100 Range
PWB Anchor Grade 100 Range Component selection guide Single Leg Multi Leg Eye Foundry Hook Eye Self- Locking Hook Swivel Self Locking Hook Clevis Self Locking Hook Clevis Sling Hook Clevis Grab Hook Chain
Pipeline Slings Catalog
Bishop Lifting Pipeline Slings Catalog Lowering-in Belts Head Irons Lined Steel Choker Belts Roundslings Rigging Accessories M E M B E R Code of Ethics Bishop Lifting has adopted the Code of Ethics of
Introduction Dan Swenson
Introduction Dan Swenson Started with Total Tool In December of 1991 Performed 1000 s of sling, hardware and crane inspections GM of our overhead crane division for 15years Design of cranes, runways, custom
Gunnebo Lifting Shackles Product Catalog
Gunnebo Lifting Shackles Product Catalog Manufacturing: All Gunnebo Lifting Shackles are produced in ISO 9001 Certified manufacturing plants. Steel Grades for Gunnebo Lifting Shackles: Grade 6 ISO Grade
SHOP RIGGING & OVERHEAD HOIST SAFETY PROGRAM
Purpose & Scope CLIMATE ENGINEERS, INC. (CE) is dedicated to the protection of our employees from occupational injuries and illnesses. The purpose of this program is to provide procedures to be followed
America s Largest Importer/Wholesaler of Wire Rope, Chain and Fittings!
America s Largest Importer/Wholesaler of Wire Rope, Chain and Fittings BLOCKS BINDERS Failure to design and use tackle block systems properly may cause a load to slip or fall - the result could be serious
Lifting Beams & Custom Engineered Lifting Devices
Lifting Beams & Engineered Lifting BASIC INFORMATION Lift-All can provide a unique engineered device for your production requirements. Our custom devices range from large capacity beams to control and
Crane, Hoist, and Sling Safety Program October 24, 2017
1. INTRODUCTION Crane, Hoist, and Sling Safety Program October 24, 2017 1.1. Purpose Indiana University has developed the Crane, Hoist, and Sling Safety Program to protect employees against the hazards
Safety guidelines. General Safety Guidelines. Working Load Limit (WLL) Proof Test. Minimum Breaking Force
Safety guidelines General Safety Guidelines Peerless Industrial Group, as a manufacturer of chain, can only control the specifications of our chain products in accordance with industry and governmental
Lifting Chain & Components
Lifting Chain & Components 1 IWR LIFTING Herc-Alloy 800 Chain Combining the qualities of high strength, low weight and durability resulting in easy, safe handling, Alloy 800 chain is manufactured to the
Roughneck Mesh Slings
Roughneck Slings Roughneck WIRE MESH SLINGS Specialty Slings with Particular Properties and Uses Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web
Hoist: An apparatus for raising or lowering a load, but does not include a car or platform riding in guides or horizontal motion.
Cranes and Hoists University of Tennessee Safety Guide GS-140 Document Contact: EHS-General Safety Date effective: March 1, 2015 Revision Date: March 1, 2015 Purpose Purpose: Many types of cranes, hoists,
winner pro winner Grade 100 product catalog Grade 120 and more Industrial 2014
product catalog Industrial 204 winner pro Grade 20 winner Grade 00 and more Polígono Indutrial O Rebullón s/n. 3646 - Mos - España - rodavigo@rodavigo.com Group History At the core of chain innovation
#908C. Weatherly Index #148. For Transportation and Industry Lifting / Cargo Control / Hardware / Winter Traction Products
#0C Weatherly Index #4 For Transportation and Industry Lifting / Cargo Control / Hardware / Winter Traction Products General Warnings & Information for SCC Products WARNING: The products in this catalog
SECTION 12. Lifting & Spreader Beams
SECTION Lifting & Spreader Beams Lifting beams and spreader bars are below the hook equipment that facilitates safe lifting by spreading the attachment points and allowing for better sling angles. Even
2018 PRODUCT CATALOGUE herculesslr.com
2018 PRODUCT CATALOGUE 1-877-461-4876 herculesslr.com Message From the President Since 1985 Hercules SLR Inc has been supplying quality securing, lifting & rigging products to a broad range of industries
BELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT
BELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT lifting EQUIPMENT HRLB ROLL LIFTING BEAM...Page 44 HMRL MOTORIZED ROLL LIFTER...Page 45 HRGT ROLL GRIPPING TONGS...Page 46 HRLCH ROLL LIFTING C-HOOK...Page
2016 MASTER CATALOGUE
2016 2016 MASTER CATALOGUE ALLOY LIFTING 2 www.vanguardsteelvancouver.com www.vanguardsteel.com ALLOY LIFTING TABLE OF CONTENTS Page Chain 1 Clevis Grab Hook 2 Clevis Slip Hook 3 Connecting Links 4 Master
CX HAND CHAIN HOIST OWNER S MANUAL ¼ Ton and ½ Ton Capacity Effective: May 9, 2017
CX HAND CHAIN HOIST OWNER S MANUAL ¼ Ton and ½ Ton Capacity Effective: May 9, 2017 WARNING This equipment should not be installed, operated or maintained by any person who has not read and understood all
Grade 80 Chain Sling Components. Grade 100 Chain Sling Components
NGER: Overhead lifting presents a very real danger of severe injury or loss of life if lifting equipment is not used properly.lease read and understand all of these instructions prior to using any lifting
Product Information. Air Chain Hoist. MLK Series. Save These Instructions. Form Edition 2 January Ingersoll Rand. (Dwg.
Product Information Air Chain Hoist MLK Series (Dwg. MHP0456) Save These Instructions R Form 47112677 Edition 2 January 2014 2014 Ingersoll Rand Only allow Ingersoll Rand trained technicians to perform
AMY SAYS: Drop Forged Pear Link. Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. Anatomy of an
AMY SAYS: Drop Forged Pear Link Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. AMY Anatomy of an V Sling Full two-ply web bodies which allow for only one splice. (no edge
LX MINI PULLER OWNER S MANUAL 1/4 and 1/2 Ton Capacities Effective: May 19, 2017
LX MINI PULLER OWNER S MANUAL 1/4 and 1/2 Ton Capacities Effective: May 19, 2017 WARNING This equipment should not be installed, operated or maintained by any person who has not read and understood all
Web Slings WEB SLING HARDWARE WARNING. Web Slings Steel Unilink Web Sling Hardware Combination Triangle and Choker Fitting U. S. Patent No.
Web Slings Web Slings Steel Unilink Web Sling Hardware Combination Triangle and Choker Fitting U. S. Patent No. 4789193 WE SLING HARDWARE This forged, high carbon steel fitting, functions as both a triangle
HOIST ARMY TYPE HOIST IMPORTANT
AA-93 15 SECTION AT/A/15 Service Instructions and Maintenance Manual 18:i!ii il HOIST ARMY TYPE HOIST IMPORTANT Keep for Future Reference SERVICE INSTRUCTIONS AND MAINTENANCE MANUAL 1 METRIC TON CAUTION:
PAGE 1 OF 5 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S360 Overhead Cranes & Lifts Procedure REV 4.0 8/14/2012
PAGE 1 OF 5 PURPOSE: OVERHEAD CRANES AND LIFTS PROCEDURE The purpose of this procedure is to define the safety and training requirements for use of overhead cranes and lifts. Procedure: Definitions Designated
Crane and Hoist Safety Program
2017 Crane and Hoist Safety Program Occupational Health, Safety and Injury Prevention 11/28/2017 Subject Matter Expert Lyndsey Beaudin Leb255@cornell.edu 607-255-0205 CONTENTS 1.0 INTRODUCTION... 3 2.0
OPERATOR S MANUAL CHAIN HOIST 0.25 TON 0.5 TON 1 TON 2 TON. These Hand Chain Hoists meet or exceed the following standards: CE ANSI B30.
OPERATOR S MANUAL CHAIN HOIST 0.25 TON 0.5 TON 1 TON 2 TON These Hand Chain Hoists meet or exceed the following standards: CE ANSI B30.16 P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250
OPERATOR S MANUAL LEVER HOIST 0.75 TON 1.5 TON 3 TON. These Lever Hoists meet or exceed the following standards: CE ANSI B30.21
OPERATOR S MANUAL LEVER HOIST 0.75 TON 1.5 TON 3 TON These Lever Hoists meet or exceed the following standards: CE ANSI B30.21 pg.1 P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064 (507) 474-6250 Tech
TONS. Before each shift: Before operating: Before initial operation of hoist:
LEVER HOIST 0.25 9 TONS Manual Notice It is the responsibility of the owner/user to install, inspect, test, maintain, and operate these lever hoists in accordance with ASME B30.21, Safety Standard for
INSTRUCTION MANUAL CONTRX FORKLIFT JIBS JLT, PBJLT, CHJLT
INSTRUCTION MANUAL CONTRX FORKLIFT JIBS JLT, PBJLT, CHJLT INSTALLATION CONTRX Fork Lift Truck Attachments shall be assembled and installed in accordance with the manufacturer's instructions, unless other
HOOKS HOOKS. VANGUARD STEEL LTD.
www.vanguardsteelvancouver.com www.vanguardsteel.com TABLE OF CONTENTS Page Alloy Clevis Grab 1 Alloy Clevis Slip 2 Alloy Clevis Slip with Latch Kit 3 Barrel 4 Carbon Clevis Grab 5 Carbon Clevis Slip 6
Notice. Overhead Crane Safety and Inspection Requirements. Daily Operator Inspection Reuirements. Daily Operator Inspection Requirements
Notice Overhead Crane Safety and Inspection Requirements It is the responsibility of the Owner/User to install, inspect, test, maintain, and operate a crane or associated lifting equipment in accordance
MODEL SHB 1 Ton through 10 Ton Capacity. Code, Lot and Serial Number
EFFECTIVE: September 13, 2017 MANUAL TROLLEY HOIST MODEL SHB 1 Ton through 10 Ton Capacity Code, Lot and Serial Number This equipment should not be installed, operated or maintained by any person who has
Ausbinder V-3 User Manual. Ausbinder V-3 Care and Instruction Manual
Care and Instruction Manual Ausbinder S2 Instruction Page 1 8/31/2010 STEP.1 Get familiar with the D. F. E. Observe these parts and positioning of the Ausbinder V-3 Handle should sit in the upright stowing
Yellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
We have the right product, at the right price, when you need it, on-time, every time
Standard features & benefits Herc-Alloy 800 Easily the best lift in the Grade 80 class When it comes to lifting, you want to be 100% sure that you re using the best there is. And with PWB Anchor s Herc-Alloy
Yellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
BELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT
BELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT lifting EQUIPMENT Tongs HBTF Bar Tong Fixed... Page 62 TONGS HBTA Bar Tong Adjustable... Page 63 lifting EQUIPMENT HBTF BAR TONG FIXED FEATURES This style of
A guide for the selection of alloy steel chain slings DLHONLINE. DLH Online Guides 02/14
A guide for the selection of alloy steel chain slings DLHONLINE Contents Page 3. Overview 4. Chain Systems 5. Stock chain and Components 6. Sling Loadings 7. Certification 8. Identification 9. Chain sling
Capacity (tonnes) 0.25t. No. of Falls 1. Load Chain (mm) Load Chain Grade 80
Capacity (tonnes) Model NO. 0.25t K025 No. of Falls Load Chain (mm) 4 2 Load Chain Grade 80 Pull To Lift Rated Load (N) Test load (tonnes) Hand Chain (mm) Std. lift (ft) Net. Weight (lbs) Gross. Weight
Safe Operating Practices & Maintenance Manual
tcamerican.com sales@tcamerican.com 763-479-7000 11110 Industrial Circle NW, Suite A, Elk River, MN 55330 Safe Operating Practices & Maintenance Manual Section Subject Page A. General 2 B. Operator Qualifications
Owner s Manual Supplement ELECTRIC CHAIN HOIST ED SERIES ED1050
EFFECTIVE: September 29, 2005 Owner s Manual Supplement ELECTRIC CHAIN HOIST ED SERIES ED1050 1050 Lb. Capacity Code, Lot and Serial Number WARNING This equipment should not be installed, operated or maintained
SYNTHETIC SLINGS. ph: 877.STREN-FLEX ( )
SYNTHETIC SLINGS ph: 877.STREN-FLEX (877.787.3635) www.stren-flex.com Ordering Tips Stren-Flex 6295 McDonough Drive Norcross, GA 30093 toll free: 877.STREN-FLEX (877.787.3635) fax: 800.628.3648 fax: 770.441.0326
SERIES 637. Rated Loads: 3/4, 1-1/2, 3, 6 tons (750, 1500, 3000 and 6000kg.) OPERATING, MAINTENANCE & PARTS MANUAL MANUALLY LEVER OPERATED CHAIN HOIST
OPERATING, MAINTENANCE & PARTS MANUAL MANUALLY LEVER OPERATED CHAIN HOIST SERIES 637 Rated Loads: 3/4, 1-1/2, 3, 6 tons (750, 1500, 3000 and 6000kg.) Before installing hoist, fill in the information below.
UNIVERSITY OF TOLEDO
UNIVERSITY OF TOLEDO SUBJECT: CRANE AND HOIST SAFETY PROGRAM Procedure No: S-08-024 PROCEDURE STATEMENT All crane and hoists operated on UT campuses must be adequately maintained and inspected as prescribed
Ryko Solutions, Inc. Crane and Jib Safety Program
Ryko Solutions, Inc. Crane and Jib Safety Program CONTENTS PURPOSE...3 POLICY...3 SCOPE...3 RESPONSIBILITIES...3 FITNESS FOR DUTY...4 INSPECTIONS...4 FREQUENT INSPECTION...4 PERIODIC INSPECTIONS...5 RATED
OPERATOR S MANUAL LEVER HOIST 0.75 TON THROUGH 9 TON. These Lever Hoists meet or exceed the following standards: CE AS ANSI B30.21 ANSI B30.
OPERATOR S MANUAL LEVER HOIST 0.75 TON THROUGH 9 TON These Lever Hoists meet or exceed the following standards: CE AS1418.2 ANSI B30.21 ANSI B30.16 pg.1 P.O. Box 845, Winona, MN 55987 Phone (800) 749-1064
Lineman s Hoist. Operating, Maintenance & Parts Manual. Follow all instructions and warnings for LMST680-2
Lineman s Hoist LMST0- Operating, Maintenance & Parts Manual Lineman s Hoist Follow all instructions and warnings for inspecting, maintaining and operating this hoist. The use of any hoist presents some
MANUAL CHAIN HOIST CF SERIES
EFFECTIVE: April 7, 2017 MANUAL CHAIN HOIST CF SERIES MODEL CF4 1/2 Ton through 5 Ton Capacity Code, Lot and Serial Number This equipment should not be installed, operated or maintained by any person who
Lincoln Hoist. Web Hoist Operating Manual. Lincoln Hoist
Lincoln Hoist Web Hoist Operating Manual Lincoln Hoist Mfg. by Lincoln Precision Machining Company 121 Creeper Hill Road, P.O. Box 458, North Grafton, MA 01536 USA Toll Free (888) 306-7222 Phone (774)
Gunnebo Classic Product Catalog by Gunnebo Lifting
unnebo Classic Product Catalog by unnebo ifting unnebo ifting Your Partner in Safe ifting The unnebo ifting KK all earing Swivel Self-ocking ook Think unnebo ifting when selecting lifting chain and components.
The Little Mule Lineman s Strap Hoist is the preferred hoist of utility industry professionals.
The Little Mule Lineman s Hoist is the preferred hoist of utility industry professionals. Single-line units available with capacities up to 1 ton. Double-line units available with capacities up to 3 tons.
PARTS, OPERATION AND MAINTENANCE MANUAL
Form MHD56028 PARTS, OPERATION AND MAINTENANCE MANUAL for MANUAL CHAIN HOIST MODELS MCH5-005 MCH5-010 MCH5-015 1/2 ton 1 ton 1-1/2 ton MCH5-020 MCH5-030 MCH5-050 2 ton 3 ton 5 ton Unless otherwise noted,
Owner s Manual. ELECTRIC CHAIN HOIST ER and NER SERIES
EFFECTIVE: May 19, 2017 Owner s Manual ELECTRIC CHAIN HOIST ER and NER SERIES 1/8 Ton through 5 Ton Capacity Code, Lot and Serial Number WARNING This equipment should not be installed, operated or maintained
Chain Products Accessories Fittings Blocks Slings Clamps Index
Over the decades, thousands of tough applications and just as many demanding customers have forged the Campbell brand. Today, Campbell industrial rigging solutions stand for strength. Campbell industrial
OPERATORS GUIDE REL-12000H - 6 TON LEVER OPERATED ROLLER CHAIN HOIST INSPECTION RECORD WARNING NOTICE
INSPECTION RECORD Date REMARKS ( Include Parts and Service Required ) Inspector OPERATORS GUIDE SPECIFICATIONS Model REL-12000H Capacity: 12,000 lbs. Travel: 62 inches Headroom: 20 inches Handle: 34 inches
Owner s Manual for Bethlehem Equipment Company Burial Vault Handler
Owner s Manual for Bethlehem Equipment Company Burial Vault Handler Safe and proper operation of a Burial Vault Handler is similar to learning to drive a car for the first time. All the manuals, videos,
MODCO TM FIGURE 500 CLOSURE
CLOSURE SPECIALISTS SINCE 1981 MODCO TM FIGURE 500 CLOSURE INSTALLATION INSTRUCTIONS (!) THE INFORMATION PROVIDED IN THIS DOCUMENT IS VERY IMPORTANT (!) & (!) needs to be shared with everyone involved
Convertible - Rated 3 4-Ton /2-Ton Nylon Strap Hoists Refer to any questions about the use, application, repair or testing of this hoist to:
Operating and Servicing Instructions for Convertible - Rated 3 4-Ton - 1 1 /2-Ton Nylon Strap Hoists Refer to any questions about the use, application, repair or testing of this hoist to: Hubbell / Chance
CM RIGGER. Operating, Maintenance. and Parts Manual. Capacities: 3/4 and 1½ Tons (700 and 1400 Kg.) ! CAUTION-IMPORTANT ! WARNING !
Operating, Maintenance and Parts Manual CM RIGGER Manually Lever Operated Chain Hoist Capacities: 3/4 and 1½ Tons (700 and 1400 Kg.) SAFETY PRECAUTIONS Each CM Rigger Manually Lever Operated Chain Hoist
Wallace Tri-Adjustable Gantry Cranes Square Tube Assembly Instructions
Wallace Tri-Adjustable Gantry Cranes Square Tube Assembly Instructions For any additional information, Please call 1- S 1. Read and understand instructions before using this gantry. 2. Inspect gantry thoroughly
Owner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman Equipment, Inc. 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushman.com
Owner s Manual ELECTRIC CHAIN HOIST ED SERIES
EFFECTIVE: September 25, 2007 Owner s Manual ELECTRIC CHAIN HOIST ED SERIES 125 through 525 Lb. Capacity Code, Lot and Serial Number WARNING This equipment should not be installed, operated or maintained
ELECTRIC CHAIN HOIST SNER SERIES
EFFECTIVE: November 12, 2004 ELECTRIC CHAIN HOIST SNER SERIES 1/4 Ton through 3 Ton Capacity Code, Lot and Serial Number This equipment should not be installed, operated or maintained by any person who
Wire rope slings 2011/12
TransportTransportundund Hebegeräte Hebegeräte Wire rope slings Wire rope slings, 1/2/4-leg... 138 Combined rope/chain suspension gears... 6 Endless wire rope slings... 7 Wire rope sling accessories...
Material Handling - Cranes, Hoists, Slings, Chain Falls, and Ratchet Hoists
Material Handling - Cranes, Hoists, Slings, Chain Falls, and Ratchet Hoists University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob
RIGGING GEAR INSPECTION WEB BASED TRAINING STUDENT GUIDE NCC-RGI-04. For Training Only NCC-RGI-04 1 of 43
RIGGING GEAR INSPECTION WEB BASED TRAINING STUDENT GUIDE NCC-RGI-04 Naval Facilities Engineering Command Navy Crane Center Norfolk Naval Shipyard, Bldg. 491 Portsmouth, VA 23709-5000 Comm. Phone: 757.967.3803,
DIN , DIN
TransportTransportundund Hebegeräte Hebegeräte Chain slings HIT PRO chain system grade 1... 152 HIT PRO grade 1 Advantages... 153 HIT PRO grade 1 Nominal ratings at one glance... 155 Chain slings HIT PRO
Below the Hook Lifting
SECTION INDEX S E C T I O N 1 3 BALE LIFTING TONG...-14 BARRIER GRABS...- 14 BEAM TONGS...-14 BEAM, SPREADER Adjustable...-4 Custom...-5 Fiberglass...-4 Fixed...-3 BEAMS, LIFTING Adjustable Hook...-1 Custom...-5
DISTRIBUTED BY TULSA CHAIN.COM, LLC.
OPERATOR S MANUAL CHAIN HOIST 0.5 TON THROUGH 30 TON These Hand Chain Hoists meet or exceed the following standards: CE AS1418.2 ANSI B30.21 ANSI B30.16 pg.1 P.O. Box 845, Winona, MN 55987 Phone (800)
RENFROE. WARNING: Before putting tool in service, take to your immediate supervisor.
WARNING: Before putting tool in service, take to your immediate supervisor. RENFROE Model M Clamp Application, Operation and Maintenance Manual OM 211-M Operators Manual This Operator s Manual covers the
ROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
RENFROE. WARNING: Before putting tool in service, take to your immediate supervisor. Application, Operation and Maintenance Manual Model DWS
WARNING: Before putting tool in service, take to your immediate supervisor. RENFROE Application, Operation and Maintenance Manual Model DWS OM 211-DWS Operators Manual This Operator s Manual covers the
Owner s Manual MANUAL CHAIN HOIST CF SERIES
EFFECTIVE: December 4, 2007 Owner s Manual MANUAL CHAIN HOIST CF SERIES MODEL CF4 1/2 Ton through 5 Ton Capacity Code, Lot and Serial Number WARNING This equipment should not be installed, operated or
Cumberland SaleS. Company. Serving the industry for over 30 years! Cumberland Sales Co. 30th Anniversary
Cumberland SaleS Company Serving the industry for over 30 years! Cumberland Sales Co. 30th Anniversary Durable. Since 1979, Cumberland Sales Company has offered dependable service and durable products
THEATRICAL CHAIN HOIST TNER SERIES
EFFECTIVE: November 1, 2013 THEATRICAL CHAIN HOIST TNER SERIES 1/2 Ton through 2 Ton Capacity Code, Lot and Serial Number This equipment should not be installed, operated, or maintained by any person who
Company Profile. Our parent Company. KWS A member of the THIELE-Group
Company Profile Our parent Company The company was founded in 935 by August Thiele. Chains were even welded in forge with only 8 employees. Later on automatic bending and welding machines facilitated the
OVERHEAD & GANTRY CRANE / RIGGING
Overhead & Gantry Crane / Rigging OVERHEAD & GANTRY CRANE / RIGGING Overhead and gantry cranes - 1910.179 Crawler locomotive and truck cranes. - 1910.180 Slings. 1910.184 Cranes, like all pieces of heavy