G03 Series Dosing Range
|
|
- Berenice Susan Dickerson
- 5 years ago
- Views:
Transcription
1 G03 Series Dosing Range Maximum Flow Rate: Maximum Pressure: up to 462 l/hr (122 gph) up to 103 bar (1500 psi) for Metallic Pump Heads up to 24 bar (350 psi) for Non-metallic Pump Heads AEX G13-M2M with Stainless Steel pump head Meeting & Exceeding API 675 Performance Standards Steady State Accuracy: ±1% Linearity: ±3% (over a 10 to 1 turn-down as per API 675) Repeatability: ±3% Infinite turn-down achievable
2 G03 Series Dosing Range Performance Capacities Flow Max. Pump Input Min. Flow Max. Flow Model rpm gph l/hr gph 103 bar (1500 psi) G03-M2H bar (870 psi) G13-M2M bar (290 psi) G13-M4L G13-M2L Pressure Maximum Inlet Pressure Up to 17 bar (250 psi) for all models Maximum Discharge Pressure Metallic Pump Heads: G03-M2H up to 103 bar ( rpm max. G13-M2M up to 60 bar ( rpm max. G13-M4L up to 20 bar ( rpm max. G13-M2L up to 20 bar ( rpm max. Non-metallic Pump Heads (for all models): Up to 17 bar (250 psi) Polypropylene Up to 24 bar (350 psi) PVDF Performance and specification ratings apply to G03 Kel-Cell and G03 Shaft-driven configurations unless specifically noted otherwise. Pump Head Examples G03 Shaft-driven with Stainless Steel pump head G13 Close-coupled with Polypropylene pump head G13 Close-coupled with Brass pump head 2 G13-M2L with Stainless Steel pump head
3 G03 Series Dosing Range Specifications Flow 103 bar (1500 psi) Model Max. Pump Input Min. Flow Max. Flow rpm gph l/hr gph l/hr G03-M2H Flow 60 bar (870 psi) Model Max. Pump Input Min. Flow Max. Flow rpm gph l/hr gph l/hr G13-M2M Flow 20 bar (290 psi) Model Max. Pump Input Min. Flow Max. Flow rpm gph l/hr gph l/hr G13-M4L G13-M2L Maximum Discharge Pressure Metallic Heads G03-M2H: up to 103 bar ( rpm max. G13-M2M: up to 60 bar ( rpm max. G13-M4L: up to 20 bar ( rpm max. G13-M2L: up to 20 bar ( rpm max. Non-metallic Heads (for all models) Up to 17 bar (250 psi) Polypropylene Up to 24 bar (350 psi) PVDF Maximum Inlet Pressure Up to 17 bar (250 psi) for all models Maximum Operating emperature Metallic Heads: 121 C (250 F) - Consult factory for correct component selection for temperatures from 71 C (160 F) to 121 C (250 F). Non-metallic Heads: 60 C (140 F) Maximum Solids Size Inlet Port Discharge Port 200 microns 1/2 inch BSP 1/2 inch NP 300lb ANSI RF Flange PN40 DN20 DIN Flange 1 inch ri-clamp 3/8 inch BSP 3/8 inch NP 600lb ANSI RF Flange PN100 DN15 DIN Flange 3/4 inch ri-clamp Shaft Diameter (for motor input) G03: 22.2 mm (7/8 inch) G13: 24mm (0.945 inch) hollow shaft G03-M2H: Requires 4kW, IEC 112, 2-Pole, B5 Motor G13-M2M: Requires 1.5kW, IEC 90, 2-Pole, B14 Motor G13-M4L: Requires 0.37kW, IEC 71, 4-Pole, B14 Motor G13-M2L: Requires 0.55kW, IEC 71, 2-Pole, B14 Motor Shaft Rotation Reverse (bi-directional) Bearings Precision ball bearings Oil Capacity G03/G13 Pump Only: 0.95 litres (1.0 US quart) raction Fluid Capacity G03-M2H Gearbox Only: 850 ml (0.9 US quarts) G13-M2M Gearbox Only: 300 ml (0.32 US quarts) G13-M4L Gearbox Only: 160 ml (0.17 US quarts) G13-M2L Gearbox Only: 160 ml (0.17 US quarts) Weight Metallic Heads Non-metallic Heads G03 Pump: 12.7 kg 8.6 kg G03-M2H Assembly: approx. 117 kg approx. 113 kg G13-M2M Assembly: approx. 60 kg approx. 56 kg G13-M4L Assembly: approx. 45 kg approx. 41 kg G13-M2L Assembly: approx. 45 kg approx. 41 kg Net Positive Suction Head (NPSHr) NPSHr (feet of water) Revolutions Per Minute Note: Positive inlet pressure required with PFE diaphragms. Self-priming: Each Hydra-Cell pump has different lift capability depending on model size, cam angle, speed, and fluid characteristics. o ensure that your specific lift characteristics are met, refer to the inlet calculations regarding friction, and acceleration head losses in your Hydra-Cell Installation & Service Manual. Compare those calculations to the NPSHr curves above. G13-M2M with Stainless Steel pump head NPSHr (meters of water)
4 G03 Series Dosing Range General Assemblies Model G03-M2H Dosing range l/hr ( bar (1500 psi) max. G03-M2H Unit Weight = 117 Kg Model G13-M2M Dosing range l/hr ( bar (870 psi) max. G13-M2M Unit Weight = 60Kg
5 G03 Series Dosing Range General Assemblies Model G13-M4L Dosing range l/hr ( bar (290 psi) max. G13-M4L Unit Weight = 45Kg Model G13-M2L Dosing range l/hr ( bar (290 psi) max. G13-M2L Unit Weight = 45Kg 5
6 G03 Series Representative Drawings G13 Models with Metallic Pump Head mm (Inches) (10.14) 4.8 (.19) (6.85) Ø 10.7 (.42) 17.8 (.70) (7.75) 2X 3/8 BSP OULE 18.4 (.73) 81.9 (3.22) 36.8 (1.45) Ø24.0 Ø (6.58) 55.2 (2.18) 1/2 BSP INLE (Primary) (4.00) 3/8 BSP INLE (Secondary) G03 Models with Non-metallic Pump Head mm (Inches) Ø167.1 (6.58) (10.14) 4X Ø 10.7 (.42) (9.94) (7.89) 2X 3/8 BSP OULE 4.8 (.19) 81.9 (3.22) Ø22.2 (.87) 36.8 (1.45) (4.25) 1/2 BSP INLE (Primary) 3/8 BSP INLE (Secondary) (.406) 89.5 (3.53) 57.2 (2.25) 69.9 (2.75) 69.9 (2.75) 85.1 (3.35) (6.85) 23.9 (.94) 20.1 (.79) (5.00) (6.55) 4X X (.406 X.750) Note: Contact factory for additional drawings of specific models and configurations. 6
7 G03 Series Representative Drawings G03 Models with ANSI RF Flanges mm (Inches) 355 (13.97) 271 (10.68) 266 (10.49) Outlet - 3/4 ANSI # RF 51 (2.01) 4.8 (.19) 225 (8.86) 108 (4.25) Ø22.2 (.87) 89.5 (3.53) Inlet - 3/4 ANSI # RF 57.4 (2.26) 69.9 (2.75) 20.1 (.79) 127 (5.00) G03 Models with ri-clamp Flanges mm (Inches) Maximum Discharge Pressure: 80 bar 301 (11.85) 252 (9.92) 217 (8.56) 51 (2.01) 3/4 ri-clamp ferrulle 4.8 (.19) 108 (4.25) Ø22.2 (.87) 1 ri-clamp ferrulle 89.5 (3.53) (4.98) 57.4 (2.26) 69.9 (2.75) 20.1 (.79) 127 (5.00) Note: Contact factory for additional drawings of specific models and configurations. 7
8 G03 Series Representative Drawings G03 Models with DIN Flanges mm (Inches) 361 (14.21) 211 (8.31) 278 (10.94) 260 (10.24) Outlet - DIN PN100 - DN15 44 (1.73) Good Key 4.8 (.19) Ø22.2 (.87) 209 (8.23) Inlet - DIN PN40 - DN20 90 (3.5) Note: Contact factory for additional drawings of specific models and configurations. 8
9 G03 Series How to Order Ordering Information X K A complete G03 Series Dosing Range Model Number contains 15 digits including 13 customer-specified design and materials options, for example: G03XKSHFECAM2L. M Order Digit Code Description 1-3 Pump Configuration G03 G13 G03 Shaft-driven (BSP Ports)* G13 Close-coupled to IEC 90 motor (BSP Ports)* - G13 Option for IEC 80 motor connection (BSP Ports) *Pump/motor adaptors ordered separately. 4 Hydraulic End Cam X Max. 462 l/hr ( rpm 5 Pump Head Version K Kel-Cell BSP Ports - AEX 2014/34/EU Certified, Category 2, Zone 1, Hazardous Liquids - AEX 2014/34/EU Certified, Category 2, Zone 1, Non-Hazardous Liquids - AEX 2014/34/EU Certified, Category 3, Zone 2 Note: All options include Certificate, Oil Level Monitor or Sight Glass, Earth Stud & Secondary AEX Label. 6 Pump Head Material B M P R Brass PVDF Polypropylene 316L Stainless Steel with ANSI RF Flanges, Class 300lb x 600lb - 316L Stainless Steel with DIN Flanges, Class PN40 DN20 x PN100 DN15* S 316L Stainless Steel - 316L Stainless Steel with ri-clamp (1 Inlet & 3/4 Discharge) Flanges polished to 0.8 Ras - 316L Stainless Steel with ri-clamp (1 Inlet & 3/4 Discharge) Flanges polished to 0.4 Ras ri-clamp options include polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers to 0.8 Ra or 0.4 Ra per above, along with SE, Passivation, Surface Finish & Weld Procedure Certificates Hastelloy CW12MW s Selecting this option will result in a Wanner International generated Pump Code, stamped onto the pump. 7 Diaphragm & O-ring Material A Aflas diaphragm / PFE o-ring E EPDM (requires EPDM-compatible oil - Digit 12 oil. code J) G J P FKM PFE Neoprene Buna-N Order Digit Code Description 8 Valve Seat Material C D H S Ceramic ungsten Carbide 17-4 Stainless Steel 316L Stainless Steel Hastelloy C 9 Valve Material C D F Ceramic ungsten Carbide 17-4 Stainless Steel N Nitronic 50 Hastelloy C 10 Valve Springs E S Elgiloy 316L Stainless Steel Hastelloy C 11 Valve Spring Retainers C H M P Y Celcon 17-7 Stainless Steel PVDF Polypropylene Hastelloy C Nylon 12 Hydra-Oil A G J K 10W30 standard-duty oil 5W30 cold-temp severe-duty synthetic oil 20-wt EPDM-compatible oil Food-contact oil Dosing Range (G03) M2H (G13) M2M (G13) M4L (G13) M2L l/hr ( rpm max. Requires a 4kW, IEC 112, 2-Pole B5 Motor (not included but available on request) l/hr ( rpm max. Requires a 1.5kW, IEC 90, 2-Pole B14 Motor (not included but available on request) l/hr ( rpm max. Requires a 0.37kW, IEC 71, 4-Pole B14 Motor (not included but available on request) l/hr ( rpm max. Requires a 0.55kW, IEC 71, 2-Pole B14 Motor (not included but available on request) 9
10 WANNER Partners in over 70 Countries WANNER ENGINEERING - WORLD HEADQUARERS & MANUFACURING Minneapolis USA t: (612) e: sales@wannereng.com WANNER PUMPS Kowloon HONG KONG t: e: sales@wannerpumps.com WANNER ENGINEERING Latin American Office t: +55 (11) e: sales@wannereng.com WANNER PUMPS Shanghai CHINA t: e: sales@wannerpumps.com WANNER INERNAIONAL Hampshire UK t: +44 (0) e: sales@wannerint.com
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
More informationG20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
More informationG20 Series. G20 Close-coupled with Brass pump head ATEX. G20 Version 1 01/15
G20 Series Maximum Flow Rate: 3.8 l/min (1.0 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads AEX G20 Close-coupled with Brass pump head G21
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationG03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More informationG15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.
G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationG04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
More informationG66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that
More informationVersatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationM03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More informationD15/D17 Series psi (172 bar) for Metallic Pump Heads
15/17 Series Maximum Flow Rate: Maximum Pressure: 15.5 gpm (58.7 l/min) 25 psi (172 bar) for Metallic Pump Heads 15/17 Series Performance Capacities Flow Pressure Model Max. Input rpm gpm l/min Max. Inlet
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationD/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationH25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
More informationMT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow
Maximum Flow Rate: Minimum Flow Rate: Maximum Pressure: 8.00 gph (30.28 lph) 0.06 gph (0.227 lph) 3500 psi (241 bar) MT8 with Stainless Steel pump head Hydra-Cell Metering Solutions pumps exceed API 675
More informationModels: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationMODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
More informationModel: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
More informationMODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationModels: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
More informationModels: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
More informationCondensed Catalog. Seal-less Pumps
Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement
More informationHydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationModels: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationP400 Metering Pump. Installation, Operation & Maintenance P C. Metallic pump shown W0014B
TM P400 Metering Pump Installation, Operation & Maintenance P400-991-2400C W0014B Metallic pump shown 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationINDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell Q Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell Seal-less Pumps Contents Page
More informationChemical and Petrochemical Process
Seal-less Pump Technology Chemical and Petrochemical Process Rugged reliability with precision Chemical and Petrochemical - with Dosing, injection, metering, spraying and transfer Compact seal-less Hydra-Cell
More informationSD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:
SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet
More informationSeal-less Pump Technology. Oil and Gas. Robust design - Reliability
Seal-less Pump Technology Oil and Gas Robust design - Reliability Hydra-Cell Oil & Gas Industry Pumps - High reliability, Gas Extraction Produced water injection Produced water disposal Well dewatering
More informationMT8 Metering Pump. Installation, Operation & Maintenance Chestnut Avenue, Minneapolis, MN 55403
TM MT8 Metering Installation, Operation & Maintenance 190-1204 Chestnut Avenue, Minneapolis, MN 55403 T e l : (612) 3 32-5 6 81 F a x : (612) 3 32-6 9 37 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationSD Series. Slurry Duty Pumps. sd - Slurry duty hydra-cell diaphragm pump
sd - Slurry duty hydra-cell diaphragm pump SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify
More informationModels: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions
Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationWANNER ENGINEERING INC
Industrial Pumps WANNER ENGINEERING INC Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to
More informationSelection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
More informationMetering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
More informationMetering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
More informationWater and Waste Water Treatment
Seal-less Pump Technology Water and Waste Water Treatment Economy through Technology Hydra-Cell Water Treatment Pumps Compact, seal-less, Disinfection Sodium Hypochlorite Chlorine Dioxide Hydrogen Peroxide
More informationINDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell Seal-less Pumps Contents Page
More informationPulsation Dampeners NEW! Wanner Engineering Inc
Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially
More informationValve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
More informationReliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace. Oil & Gas Processing
Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace Oil & Gas Processing Hydra-Cell Pumps for Oil & Gas Processing Pressure Injecting and Mixing Transfer Spraying Metering
More informationP200 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P200 Metering Pump Installation & Service P200-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
More informationAccurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products. Engineered Wood
Accurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products Engineered Wood Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell Pumps
More informationC Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line.
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
More informationHigh-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles. Machine Tool Coolant
High-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles Machine Tool Coolant High-Pressure Coolant Delivery Hydra-Cell Pumps for Machine Tool Coolant Compact,
More informationINDUSTRIAL PUMPS PARTS MANUAL. MODELS: C-22, C-23, C-24 Bypass Pressure Regulating Valves WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries about this pump, please mention
More informationElectronic Precision Metering. Built to exceed API 675 performance standards with pulse-free linear flow
Electronic Precision Metering Built to exceed API 675 performance standards with pulse-free linear flow Contents Page(s) Introduction....................................... 3 Markets Served.....................................
More informationOil & Gas Processing. Seal-less Pumps. Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace
Oil & Gas Processing Seal-less Pumps Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell
More informationP100 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P100 Metering Pump Installation & Service P100-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationSB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,10,,20,32,45,64,90,120,0 series 1 2 3 4 5 6 7 8 9 at Nameplate information Mechanical Seal, Minimum inlet pressure - NPSHA Motor Data Max. Operating Pressure and Inlet Pressures Pumped
More informationSB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,,,,32,45,64,90,1,0 series 1 2 3 4 5 6 7 8 9 11 Nameplate information Mechanical Seal, Minimum inlet pressure NPSHA Motor Data Max Operating Pressure and Inlet Pressures Pumped Liquids
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationModels: D35, G35. Installation, Operation & Maintenance D B
Installation, Operation & Maintenance D35-991-2400B Models: D35, G35 W0172B 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationC Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
More informationProMinent ProMus Hydraulic Diaphragm Metering Pumps
Overview: ProMus High pressure chemical process metering (see page 131 for spare parts) The ProMus is a motor driven metering pump with a hydraulically actuated diaphragm. The drive case and the hydraulic
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationModels: D66. Installation, Operation & Maintenance A1
Installation, Operation & Maintenance 210-800A1 Models: D66 W0577A 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationTranquilizer. Surge Suppression for Air-Driven Diaphragm Pumps. Visit our website!
Quality System ISO9001 Certified Environmental Management Systems ISO14001 Certified Tranquilizer Surge Suppression for Air-Driven Diaphragm Pumps Virtually surge-free flows Steadier pressures Less vibration
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationARBO. ARBO Chemical pumps. Pompen en Filters b.v. DIN-EN ISO 2858 with mechanical seal. Product group 1.0
ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585 - ISO 2858 with mechanical seal Product group 1. ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585-ISO 2558 with mechanical seal
More informationPrimus 221 offers optimum dosing accuracy and operating convenience. The dosing flow variation is only ± 1,5 %
Product Information Primus 221 The versatile diaphragm dosing pump Primus 221 offers optimum dosing accuracy and operating convenience The dosing flow variation is only ± 1,5 % Primus 221 doses with a
More informationA200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationS300 L series positive displacement metering pump
S300 SERIES www.signal-pumps.co.uk S300 L series positive displacement metering pump Operating capacities from 1.5 to 22,000 litres/hour from 400 to 5 bar A range of high temperature head materials includes
More informationDurability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications.
Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications. When we say "Simply Built to Last", we mean it! Wanner Engineering Hydra-Cell
More informationIdentity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
More information