To maximize energy savings in any type of buildings

Transcription

1 To maximize energy savings in any type of buildings THEY HAVE SPECIFIED AND INSTALLED ENERGY SAVING PRODUCTS: Diamond 2 & 3 Dubai Residence Evelyn Singapore The Soil Marine Bay Singapore Tribeca by the Waterfront Singapore Infrared detector

2 TRAFFIC DETECTION, AUTOMATIC DETECTOR DIGITAL PASSAGE DETECTION POWER PACKS DETECTION (See p. 909) Automatically switch on or off the light when user is detected (See p. 909) Can be switched on manually or switched off, automatically override with remote control DETECTORS (See p. 909) To complete installation from 47 to 186 m 2 areas POWER PACKS (See p. 909) Where several circuits are required or for large areas Lighting management selection chart (See p. 909) 3 TECHNOLOGIES The choice of your solution depends on the surface of rooms, the walls and how the rooms are used for (passage, long stay...) PASSIVE INFRARED TECHNOLOGY Passive infrared (PIR) technology senses occupancy by detecting the difference between heat emitted from the human body in motion and background space ULTRASONIC TECHNOLOGY Using the Doppler principle, ultrasonic occupancy sensors work by boucing ultrasonic sound waves off objects in an area and measuring the time it takes for the waves to return DUAL TECHNOLOGY A combination that takes advantage of the best features of both PIR and ultrasonic technologies. Using the Dual Sensing Verification Principle, both sensing technologies must detected occupancy to turn lighting on, while continued detection by only one technology will hold lighting on OTHER LEGRAND SYSTEMS AND RANGES FOR YOUR PROJECTS International standards wiring accessories See p Solutions for office equipment See p Solutions for shared work areas See p VDI equipment and emergency lighting systems See p and

3 select your emergency lighting luminaire Emergency Battery Emergency Cat.Nos Mode IP duration type Lighting source lumen output (in lm) Arcor TM 2 Auto-test Auto-test Addressable M IP 20 1h Ni-Cd Cold cathod NM IP 20 1h Ni-Cd fluorescent tube 45 G5 Standard Auto-test Addressable NM IP 42 1h Ni-Cd 1 x 8 W NM IP 42 1h Ni-Cd 1 x 11 W C IP 42 1h Ni-Cd 2 x 8 W C IP 42 1h Ni-Cd 2 x 8 W NM IP 42 3h Ni-Cd 1 x 8 W NM IP 42 1h Ni-Cd 1 x 8 W C IP 42 3h Ni-Cd 2 x 8 W (1) - NM IP 42 1h Ni-Cd 1 x 8 W (1) (1) NM IP 42 1h Ni-Cd 1 x 8 W (1) (1) NM IP 42 1h Ni-Cd 1 x 8 W (1) (1) NM IP 42 1h Ni-Cd 1 x 11 W (1) (1) NM IP 42 3h Ni-Cd 1 x 8 W (2) (2) C IP 42 1h Ni-Cd 2 x 8 W (2) (2) C IP 42 3h Ni-Cd 2 x 8 W C IP 42 1h Ni-Cd 2 x 8 W 310 Strio 2 Standard Auto-test Addressable NM IP 41 1h Ni-Cd 1 x 8 W M IP 41 1h Ni-Cd 1 x 8 W C IP 41 1h Ni-Cd 2 x 8 W NM IP 41 3h Ni-Cd 1 x 8 W M IP 41 3h Ni-Cd 1 x 8 W C IP 41 3h Ni-Cd 2 x 8 W 130 S8 Standard NM IP 42 1h Ni-Cd 1 x 8 W M IP 42 1h Ni-Cd 1 x 8 W C IP 42 1h Ni-Cd 2 x 8 W NM IP 42 3h Ni-Cd 1 x 8 W M IP 42 3h Ni-Cd 1 x 8 W C IP 42 3h Ni-Cd 2 x 8 W 110 L31 Standard Auto-test Addressable NM IP 42 1h Ni-Mh 1 x 6 W NM IP 42 1h Ni-Mh 2 x 6 W NM IP 42 2h Ni-Mh 1 x 6 W NM IP 42 1h Ni-Mh 2 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W C IP 42 1h Ni-Cd 2 x 6 W C IP 42 2h Ni-Cd 2 x 6 W NM IP 42 3h Ni-Cd 1 x 6 W (3) NM IP 42 1h Ni-Cd 1 x 6 W (3) (3) NM IP 42 1h Ni-Cd 2 x 6 W (3) NM IP 42 3h Ni-Cd 1 x 6 W 75 U21 Standard NM IP 42 1h Ni-Cd 1 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W NM IP 42 1h Ni-Cd 1 x 6 W C IP 42 1h Ni-Cd 2 x 6 W NM IP 42 3h Ni-Cd 1 x 6 W Standard B65 / NT65 Twin spot light M IP 20 1h Ni-Cd 1 x 8 W 70/ M IP 20 3h Ni-Cd 1 x 8 W 30/50 Standard Auto-test Addressable NM IP 65 1h Ni-Cd 1 x 6 W NM IP 65 1h Ni-Cd 1 x 6 W C IP 65 1h Ni-Cd 2 x 6 W C IP 65 1h Ni-Cd 2 x 8 W NM IP 65 1h Ni-Cd 1 x 11 W NM IP 20 1h Ni-Cd 2 x 20 W 2 x NM IP 20 3h Ni-Cd 2 x 20 W 2 x NM IP 55 1h Ni-Cd 2 x 35 W NM IP 45 1h Ni-Cd 2 x 65 W 1500 NM: Non Maintained C: Combined M:Maintained P: Permanent (1) With two signalling LEDs (2) Double sided for suspension or flag mounting (3) V power supply 916 Red catalogue numbers: New products

4 Legrand Vision System (L.V.S.) central control panel for addressable emergency lighting units and conversion kits Legrand Vision System (L.V.S.) monitoring software Pack Cat.Nos Central control panel unit for addressable emergency lighting luminaires and conversion kits Periodically centralises the state of the emergency lighting luminaires and conversion kits Communication between the addressable luminaires and the central control panel is carried out via the remote control line Capacity: Direct connection of 250 addressable products to the central control panel (star configuration or series connection). The longest line is limited to 700 m Extension via repeater Cat.No for more than 250 addressable luminaires or a line longer than 700 m Maximum capacity of the central control panel: 1,023 addressable luminaires or conversion kits Use: Via clear ergonomic menu and contextual keys with display on large LCD screen - Configuration of the parameters of the central control panel - Simple addressing of addressable luminaires - Management of user access rights - Maintenance assistance functions with location of faulty luminaires - Function on front panel of the central control luminaires to directly switch lighting units to rest mode - Permanent backup memory of the configuration of the addressable luminaires installation Signalling: - Central control panel operational - Faulty emergency lighting luminaires Connections: - 19-pin adaptable RS 232 output for connection to PC, modem, or connection interface Possible types of connection: - Via RS 232 serial cord ( 5 m) - Via RS 485 seria link (via RS 232/RS 485 interface, not supplied) - Via Ethernet local area network (via RS 232/IP interfaces, not supplied) pin SUB-D output for printer port Power supply: 230 V - 50 Hz Ni-Cd battery 8.4 V Ah Class II IP 20 Repeater For extending the installation beyond 250 units or for a line 700 m (on central control panel or repeater) up to 250 additional luminaires and on the longest line 700 m Class II Power supply: 230 V - 50 Hz Ni-Cd battery 8.4 V Ah Dim.: 6 x 17.5 mm modules L.V.S. software main screen Spare part list Overview Work sheet Pack Cat.Nos Monitoring software For supervising an installation of addressable self-contained emergency lighting luminaires and conversion kits in one complete site equipped with one or more control panels, irrespective of the size of the installation Simultaneous supervision of the whole site according to the construction configuration (tree structure by buildings, levels, floors or zones) Display of the actual image on each luminaire shown on the background of each zone of the site Backgrounds of the site imported in DXF Autocad format (vectorised) or bitmap (GIF, etc) Direct display of faulty units on plan, with type of luminaire failure New functions for assistance with maintenance - Overview screen of the establishment showing the number and percentage of faulty luminaires for each building and level of the site (in relation to the number of luminaires installed) - Automatic printout of the list of spare parts (descriptions and Legrand catalogue numbers) needed to repair the whole installation - Automatic printout of a repair document locating each faulty luminaire and detailing its repair operations These products are part of emergency lighting systems > See p

5 EMERGENCY LIGHTING >>> Arcor TM 2 Style and safety Arcor TM 2 Self-contained emergency edge lighting luminaires flush-mounting Direct flush-mounting Wall or flag mounting Unit for direct flush-mounting in ceiling or false ceiling Transparent plate for improved light reproduction Life time duration > hours: cold cathode technology Aluminium or white finish These products are part of emergency lighting systems > See p Pack Cat.Nos Self-contained emergency edge lighting luminaires Equipped with long-life cold cathode fluorescent tube ( 50,000 hours) Certified IEC and EN standards Lumen output: 45 lumens Duration: 1 hour Power supply 230 V - 50/60 Hz IP 20 - class II Autotest luminaires incorporate an automatic self-testing system: - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests Autotest and addressable luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat.No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Unit for direct flush-mounting: - on self-supporting ceilings using quick-fit fixing claws - on false ceilings using holding claws and fastening system for safety tie or by 1/4 -turn for threaded rod Shallow depth (80 mm) Option of mounting as wall strip or flag with fixing kit Cat.No / Auto-test addressable Auto-test Maintained Non-maintained Equipped with long life LED standby indicator ( 100,000 hours) Fixing kit for mounting as wall strip or flag Kit comprising: - 1 mounting bracket - 1 casing Aluminium finish White finish 918

6 Arcor TM 2 pictogram plates Arcor TM 2 Self-contained emergency edge lighting luminaires Overall dimensions Standard flush-mounting mm Wall mounting with fixing kit Flag mounting 364 mm Pack Cat.Nos Pictogram plates Polycarbonate plates directly moulded with the pictogram (In-Mold technology) ensuring improved luminous performances and protection against scratches Complying with ISO and ISO 7010 standards For emergency lighting Exit to left or right Exit below Exit For fire-fighting equipment Extinguisher Flush-mounting Fire hose point Flag mounting Wall strip mounting These products are part of emergency lighting systems > See p

7 G5 self-contained emergency lighting luminaires Pack Cat.Nos Non-maintained luminaires Slim luminaires Certified to IEC and EN standards Power supply: 230 V +/- 10% - 50/60 Hz IP 42 - IK 07 class II Suitable for mounting on inflammable surfaces Ni-Cd batteries, high temperature type Recharge time: 24 hours High capacity screw terminals: 2 x 2.5 mm 2 (mains) Charge monitor: 2 high luminosity amber LEDs or 1 green LED Autotest and addressable luminaires incorporate an automatic self-testing system: - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests These autotest luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central conrol panel (Cat. No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Standard Auto-test 8 W luminaires with 2 high luminosity Addressable amber LEDs h - 90 lm h lm h lm h lm 11 W luminaires with 2 high luminosity amber LEDs h lm 8 W luminaires with a green LED h lm h lm h lm 11 W luminaires with a green LED h lm Pack Cat.Nos Combined luminaires Possibility to turn on and off the maintained tube with an external switch (see the technical leaflet) Standard Auto-test 8 W luminaires with a green LED Addressable h lm h lm h lm 8 W double-sided luminaires for suspension or flag mounting h lm h lm h lm Suspension kit To install the luminaires Cat.Nos /47/74/75/76 at 40 cm from the ceiling Chromed colour and metallic accessory Flag kit To install the luminaires Cat.Nos /47/74/75/76 in flag mounting position Chromed colour and metallic accessory These products are part of emergency lighting systems > See p

8 G5 self-contained emergency lighting luminaires Pack Cat.Nos Accessories Double-sided diffuser To replace the one delivered with the luminaire Semi-flush mounting frame To install the luminaire in wall or false ceiling, depth: 52 mm White Steel Pack Cat.Nos Labels x 112 mm x 112 mm x 112 mm x 112 mm Aluminium Bronze Flush-mounting frame To install the luminaire in wall or false ceiling, depth: 64 mm White Steel Aluminium x 112 mm x 112 mm x 112 mm x 112 mm x 112 mm Other signs, please consult us Bronze These products are part of emergency lighting systems > See p

9 G5xxxxxx self-contained emergency lighting luminaires Dimensions (in mm) Optical data Surface mounting Flush-mounting Luminaire spacing, in metres, to provide 1 lux minimum illuminance Semi flush-mounting Double-sided mounting Suspension mounting Lamps and batteries Cat.Nos Emergency lamps Batteries / / / / / / / / / /72/ / / Semi flush-mounting with colored frame Flag mounting Celling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height directly D (m) (m) under D (m) D (m) D (m) luminaire (lux) /41/60/ /42/61/ /62/ /44/63/ / / / / / : consult us 922

10 Distribution of luminous intensity in cd/1 000 lm Cat.No Cat.Nos /41/60/70 Cat.Nos /42/61/71 30 cd 75 cd 50 cd Cat.Nos /62/72 Cat.Nos /44/63/73 Cat.Nos / cd 175 cd 75 cd Cat.Nos /65 Cat.Nos /66 50 cd 100 cd Cat.Nos /74 Cat.Nos /75 Cat.No cd 40 cd 60 cd 923

11 Strio 2 self-contained emergency lighting luminaires Strio 2 self-contained emergency lighting luminaires Dimensions (in mm) Surface mounting Plug-in base plate Pack Cat.Nos 8 W non-maintained, maintained and combined luminaires Certified to IEC and EN standards Power supply: 230 V +/- 10% Hz IP 41 - Class II Plug-in base plate to ease installation and maintenance Lamp and emergency operation with a push-button Suitable for mounting on inflammable surface Ni-Cd batteries, high temperature type Recharge time: 24 hours High capacity screw terminals: 2 x 2.5 mm 2 Charge monitor with a green LED Autotest and adressable luminaires incorporate an automatic self-testing system: - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests These autotest luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat. No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Standard Auto-test 1 h duration addressable Non-maintained 200 Im Maintained 170 Im Combined 200 Im 3 h duration Non-maintained 130 Im Maintained 140 Im Combined 130 Im Ceiling mounting with double-sided diffuser Flush-mounting Flush-mounting with double-sided diffuser 469 Grid Cat.No Accessories Flush-mounting frame Double-sided diffuser Grid Labels (p. 949) 924

12 Optical data Luminaire spacing, in metres, to provide 1 lux minimum illuminance Ceiling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height directly D (m) (m) under D (m) D (m) D (m) luminaire (lux) / / / / / / / / /9 10/ / /3.5 9/ / / / / / / / / / / /33/24/ / / / /2.8 7/ / / / / / / / / /10 2.8/ /2 7.4/8 8.6/9.8 2/ / 6.8/ /8.8 / Distribution of luminous intensity in cd/1 000 Im Cat.Nos /21/23/24/30/31/33/34 (cd/1000 lm) C0 - C180 C90 - C270 Cat.Nos /25/32/ (cd/1000 lm) C0 - C180 C90 - C Lamps and batteries Cat.Nos Emergency lamps Batteries / / / / / /

13 S8 self-contained emergency lighting luminaires S8 self-contained emergency lighting luminaires Dimensions (in mm) Surface mounting Ceiling mounting with double-sided diffuser Flush-mounting Pack Cat.Nos 8 W non-maintained, maintained and combined luminaires Certified to IEC and EN standards Power supply: 230 V +/- 10 % - 50/60 Hz IP 42 - Class II Lamp and emergency operation test with a pushbutton Suitable for mounting on inflammable surfaces Ni-Cd batteries, high temperature type Recharge time: 24 hours High capacity screw terminals: 2 x 2.5 mm 2 Charge monitor with a green LED 1 h duration lm Non-maintained Maintained Combined 3 h duration lm Non-maintained Maintained Combined Accessories Flush-mounting frame Double-sided diffuser 32 With double-sided diffuser 149 Lamps and batteries Cat.Nos 45 Emergency lamps Batteries /01/ /04/ Labels (p. 949) 926

14 Optical data Distribution of luminous intensity in cd/1000 lm Luminaire spacing, in metres, to provide 1 lux minimum illuminance Ceiling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height (m) directly under D (m) D (m) D (m) D (m) luminaire (lux) / / / / / / /5 3.2/ / / /5 2.8/ / / / / / / / / / / / / / / /4.3 2/ / /1.2 Cat.No Cat.No cd 50 cd Cat.No Cat.No cd Cat.No Cat.No cd 30 cd 30 cd 927

15 L31 LUMINAIRES >>> One universal base for 3 different shapes L31 environmental friendly self-contained emergency lighting luminaires Pack Cat.Nos 6 W non-maintained environmental friendly extra slim luminaires Low depth: 43 mm Certified to IEC and EN standards Power supply: 230 V +/- 10% - 50/60 Hz Low consumption with switching power supply incorporated IP 42 - IK 07 Class II Suitable for mounting on inflammable surfaces Ni-MH environment friendly batteries, high temperature type Recharge time: 24 hours Screw terminals capacity: 2 x 1.5 mm 2 Charge monitor with a green LED Autotest and addressable products incorporate an automatic self-testing system - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests These autotest luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat. No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Standard Autotest Addressable h lm (1 x 6 W) h lm (2 x 6 W) h lm (1 x 6 W) h lm (2 x 6 W) Large choice of aesthetic diffusers Extra-slim: 43 mm depth Easy to integrate in walls and ceilings Energy saving thanks to green batteries Non-maintained and combined luminaires These products are part of emergency lighting systems > See p

16 L31 self-contained emergency lighting luminaires Pack Cat.Nos 6 W extra slim luminaires Low depth: 43 mm Certified to IEC and EN standards Low consumption with switching power supply incorporated IP 42 - IK 07 Class II Suitable for mounting on inflammable surfaces Ni-Cd batteries, high temperature type Recharge time: 24 hours Screw terminals capacity: 1 x 1.5 mm 2 Charge monitor with a green LED Autotest and addressable products incorporate an automatic self-testing system - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests These autotest luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat. No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Standard Autotest Power supply: 230 V +/- 10% - 50/60 Hz Addressable h - 70 lm non-maintained (1 x 6 W) h lm non-maintained (1 x 6 W) h lm non-maintained (1 x 6 W) h lm non-maintained (1 x 6 W) h lm combined (2 x 6 W) h lm combined (2 x 6 W) h - 75 lm non-maintained (1 x 6 W) Power supply: from V - 50/60 Hz h lm non-maintained (1 x 6 W) h lm non-maintained (1 x 6 W) h - 75 lm non-maintained (1 x 6 W) Pack Cat.Nos Accessories Universal flush- mounting frame for walls and ceilings Include 2 pieces: box + frame Flush-mounting frame for mounting over C3 box For access with tubes 20 mm Pictogramm plate for transformations in a double side unit Square diffuser Round diffuser Round flush-mounting frame Square flush-mounting frame These products are part of emergency lighting systems > See p Red catalogue numbers: New products 929

17 L31 Self-contained emergency lighting luminaires Dimensions (in mm) Flush-mounting over C3 box Universal surface mounting With pictogramm plate With round diffuser Flush-mounting with round diffuser to Ø Mounting with tubes 20 mm With square diffuser Flush-mounting with square diffuser to Universal flush-mounting Lamps and batteries to Cat.Nos Emergency lamps Batteries /19/ /20/31/ / / / / /

18 Distribution of luminous intensity in cd/1 000 lm Cat.No Cat.Nos /02/19/30 Cat.No cd 35 cd 50 cd Cat.Nos /20/31/33 Cat.Nos /21 Cat.Nos /22 75 cd 75 cd 50 cd Cat.No Cat.Nos /24 Cat.Nos / cd 75 cd 35 cd Cat.Nos /32 25 cd 931

19 L31 xxxxxx Self-contained emergency lighting luminaires Ceiling mounting height (m) Lighting level directly under luminaire (lux) Axial to wall Axial spacing Transverse spacing Transverse to wall D (m) D (m) D (m) D (m) : 70 lm / / / 5 5 / / 4 4 / /02/19/30: 100 lm / / : 160 lm /20/31/33: 200 lm /21: 250 lm

20 L31 xxxxxx Self-contained emergency lighting luminaires (continued) Ceiling mounting height (m) Lighting level directly under luminaire (lux) Axial to wall Axial spacing Transverse spacing Transverse to wall D (m) D (m) D (m) D (m) /22: 160 lm - 2 h : 315 lm /24: 200 lm - Combined /23: 110 lm - 2 h / / /32: 75 lm - 3 h / / / 5 5 / / / 933

21 U21 self-contained emergency lighting luminaires Pack Cat.Nos 6 W luminaires Certified to IEC and EN standards Power supply: 230 V +/- 10% - 50/60 Hz IP 42 - IK 07 Class II Suitable for mounting on inflammable surfaces Ni-Cd batteries, high temperature type Recharge time: 24 hours Screw terminals capacity: 2 x 1.5 mm 2 Charge monitor: 2 high luminosity amber LEDs (non maintained units), 1 red LED (Cat.No ) or 1 green LED (combined units) 6 W fluorescent-non maintained h - 45 lm h lm h lm h lm 6 W fluorescent-combined h - 85 Im Pack Cat.Nos Accessories Flush-mounting frame Box for mounting on walls joint to frame Cat.No Labels (p.949) These products are part of emergency lighting systems > See p

22 U21 self-contained emergency lighting luminaires Dimensions (in mm) Surface mounting Recessed mounting Recessed mounting in walls Optical data Luminaire spacing, in metres, to provide 1 lux minimum illuminance Ceiling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height (m) directly under D (m) D (m) D (m) D (m) luminaire (lux) Distribution of luminous intensity in cd/1000 lm Cat.No Cat.No cd. 25 cd Cat.No Cat.No Lamps and batteries Cat.Nos Emergency lamps Batteries cd cd Cat.No cd

23 5108 self-contained emergency lighting luminaires 5108 self-contained emergency lighting luminaires Dimensions (in mm) Cat.Nos /52 Backplate Cat.No Pack Cat.Nos 8 W maintained exit sign luminaires Certified to IEC and EN standards, For escape route lighting, single or double sided use IP 20 - Class I Ni-Cd batteries, high temperature type Recharge time: 24 hours 5108 M1-1 h duration Power supply: 230 V +/- 10 % - 50/60 Hz Lumen output: 70 lm (single sided), 100 lm (double sided) Charge monitor: green LED 5108 M3-3 h duration Power supply: 240 V +/- 10 % - 50/60 Hz Lumen output: 30 lm (single sided), 50 lm (double sided) Charge monitor: red LED Accessories Backplate Backplate Pictogram plates Dim.: 417 x 167 mm Grid Cat.No Optical data Luminaire spacing, in metres, to provide 1 lux minimum illuminance 152 Ceiling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height (m) directly under D (m) D (m) D (m) D (m) luminaire (lux) (70 lm) single sided (100 lm) double sided / (30 lm) single sided / / / / (50 lm) double sided / / Grid Distribution of luminous intensity in cd/1000 lm Cat.Nos (90 lm) Cat.Nos (100 lm) (30 lm) (50 lm) (cd/1000 lm) C180 C270 C0 C90 (cd/1000 lm) C180 C270 C0 C90 Lamp and battery Cat.Nos Emergency lamp Battery / These products are part of emergency lighting systems > See p

24 B 65 / NT 65 - weatherproof self-contained emergency lighting luminaires B 65 / NT 65 - weatherproof self-contained emergency lighting luminaires Dimensions (in mm) B 65 NT Pack Cat.Nos Weatherproof non-maintained and combined luminaires Certified to IEC and EN standards Power supply: 230 V +/- 10% - 50/60 Hz IP 65 - IK 07 Suitable for mounting on inflammable surfaces Ni-Cd batteries, high temperature type Recharge time: 24 hours Screw terminals capacity: 2 x 1.5 mm 2 Rest mode with remote control unit (Cat.No ) Charge monitor with high luminosity amber LEDs Autotest and addressable products incorporate an automatic self-testing system - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs display the result of the tests These autotest luminaires can operate as addressable luminaires by setting an address on internal microswitches and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat. No ) and can be monitored on the building's plan with Legrand Vision System (LVS) software B 65 Standard Auto-test IP 65 - Class II Addressable W non-maintained - 90 lm W non-maintained lm W combined lm NT 65 IP 65 - Class I Base of light filtting made of stamped sheet W combined Im W non-maintained Im 79 Optical data Luminaire spacing, in metres, to provide 1 lux minimum illuminance Celling Lighting Axial to wall Axial spacing Transverse Transverse mounting level spacing to wall height directly (m) under D (m) D (m) D (m) D (m) luminaire (lux) (90 Im) (155 Im) (400 Im) /67 (165 Im) / / (715 Im) Distribution of luminous intensity in CD / lm Cat.Nos /67 Cat.No Cat.No cd cd Cat.No Lamps and batteries Cat.Nos Emergency lamps Batteries cd cd

25 conversion kits for emergency lighting luminaires Made up with a slim charger/inverter module and a battery pack designed to fit fluorescent luminaires and convert them into stand-by lighting units in case of mains failure Compatible with magnetic and most electronic ballasts In the event of a mains failure, the converted luminaires will remain lit up for the rated duration of 1 hour or 3 hours The luminaires will resume normal operation and the battery will be recharged upon return of the mains supply Certified to EN standard ( Cat.Nos /42/46/48, other Cat.Nos) The conformity of these modules cannot by itself guarantee the overall conformity of the luminaire they are fitted to or incorporated into The installation and incorporation standards of the subassembly as a component must be strictly respected to ensure the overall conformity of the luminaire The converted luminaire manufacturer is responsible for proving the conformity of the overall installation and for ensuring that the relevant standards are met Able to operate either on non-maintained mode Operating ambient temperature: 10 C to 40 C Suitable for incorporation into luminaires with internal temperature up to 50 C To be installed apart in a remote box above 50 C Recharge time: 24 h. Green LED charge indicator. High temperature Ni-Cd batteries For conversion kits with environmental friendly Ni-MH batteries, consult us Automatic terminals Pack Cat.Nos Standard conversion kits 1 h duration V - 50/60 Hz For all lamps 1/ For 6 to 36 W lamps 1/ For 6 to 58 W lamps 1/ For 6 to 58 W lamps For all lamps except T5 tubes 1/ For 10 to 18 W lamps 1/ For 13 to 38 W lamps 1/ For 26 to 58 W lamps 1 h duration V - 50/60 Hz For T5 lamps (with electronic ballasts only) 1/ For 14 to 24 W lamps 1/ For 28 to 54 W lamps 3 h duration - 230/240 V - 50/60 Hz For all lamps 1/ For 6 to 58 W lamps For all lamps except T5 tubes 1/ For 10 to 18 W lamps 1/ For 13 to 38 W lamps 1/ For 26 to 58 W lamps For T5 lamps (with electronic ballasts only) 1/ For 14 to 24 W lamps 1/ For 28 to 54 W lamps Pack Cat.Nos Autotest / L.V.S. (Legrand Vision System) Addressable conversion kits for emergency lighting luminaires Compatible with all electronic ballasts Automatic self-testing system incorporated: - weekly test: emergency operation and lamp check - quarterly test: emergency operation and duration check - green (OK) and yellow (defect) LEDs and a buzzer to indicate the result of the tests These autotest conversion kits can operate as addressable kits by setting an address on internal microswitches (directly accessible on the top of the kits) and wiring a complementary bus line The operating state of the luminaires is controlled by the central control panel (Cat.No ) and can be monitored on the building's plan with Legrand Vision System (L.V.S.) software Power supply: 230 V +/- 10% - 50/60 Hz 1/ For 10 to 58 W lamps - 1 h duration 1/ For 10 to 58 W lamps - 3 h duration These products are part of emergency lighting systems > See p Bold pack quantities: Minimum quantities to be ordered

26 conversion kits for emergency lighting luminaires Dimensions Cat.Nos /42/46/48 Module Cat.Nos /76/77 Module Between holes: B A C D Cat.Nos A B C D Cat.Nos A B C Battery type Stick 4 VTCs Stick 5 VTCs Stick 3 VTCs 1 Stick 4 VTCs Cat.Nos /71/ Battery Battery A B C Module Cat.Nos /79 Module 30 Between holes: Between holes: Battery Battery A B A B Cat.Nos A B Battery type Stick 3 VTD Stick 4 VTD Stick 5 VTD Cat.Nos A B Battery type Sticks 4 VTCs Stick 5 VTS Stick 6 VTS Cat.Nos /74 Module Cat.Nos /81 Module Between holes: Between holes: Battery Battery B A B C A C Cat.Nos A B C Battery type Stick 4 VTD x Sticks 3 VTD Cat.Nos A B C Battery type Sticks 4 VTCs Sticks 4 VTD 939

27 conversion kits for emergency lighting luminaires (continued) Ballast lumen (BLF) selection chart Lamp Wattage BLF (Ballast Lumen Factor) T8 18 W W W T5 14 W W W W W 49 W W PLC 10 W W W W 0.08 PLL 18 W W (2) 0.23 (2) W (2) 0.20 (1) W 0.18 (3) W 0.13 (3) PLT 18 W W W W 2D 10 W 0.40 (1) W 0.48 (1) 0.90 (2) 0.42 (2) W (2) 0.33 (2) W (2) 0.28 (2) W W C 22 W W W (1) 0.19 (2) 0.14 (1) Autonomy to 1h30 (2) Autonomy to 1h45 (3) Autonomy to 45 min (4) It's necessary to remove the switch Batteries Cat.Nos Battery type Battery specification Ni-Cd 6.0 V Ah Ni-Cd 7.2 V - 4 Ah Ni-Cd 3.6 V - 4 Ah Ni-Cd 7.2 V - 4 Ah Ni-Cd 3.6 V - 4/4.5 Ah Ni-Cd 4.8 V - 4/4.5 Ah Ni-Cd 6.0 V - 4/4.5 Ah Ni-Cd 4.8 V - 4/4.5 Ah Ni-Cd 7.2 V - 4/4.5 Ah Ni-Cd 4.8 V - 1.5/1.6 Ah Ni-Cd 6.0 V - 1.5/1.6 Ah Ni-Cd 8.4 V - 1.5/1.6 Ah Ni-Cd 9.6 V - 1.5/1.6 Ah Ni-Cd 13.2 V - 1.5/1.6 Ah Ni-Cd 9.6 V Ah Ni-Cd 9.6 V - 4 Ah 940

28 BLF (Ballast Lumen Factor) / (4) 0.23 (4) 0.11 (4) 0.17 (4) 0.09 (4) 0.14 (4)

29 conversion kits for emergency lighting luminaires (continued) Wiring diagrams for conversion in maintained mode For Cat.Nos /42/46/48 With a conventional ballast and 1 tube L N 8 V min. SW Ballast For Cat.Nos /71/72 (continued) With an electronic ballast and 1 tube L N SW Electronic Ballast Battery With an electronic ballast and 1 tube L N 8 V min. SW Electronic Ballast For Cat.Nos /74 With an electronic ballast and 1 tube L N SW Electronic Ballast Battery For Cat.Nos /71/72 With a conventional ballast L N With an electronic ballast, 6 terminals and 2 tubes L N SW Ballast SW Electronic Ballast Module

30 Wiring diagrams for conversion in maintained mode (continued) For Cat.Nos /76/77 With a conventional ballast L N SW Ballast With an electronic ballast and 1 tube L N SW Electronic Ballast Module For Cat.Nos /79 With an electronic ballast and 1 tube L N SW Electronic Ballast With an electronic ballast, 6 terminals and 2 tubes L N SW Electronic Ballast For Cat.Nos /81 With an electronic ballast and 1 tube L N With an electronic ballast, 6 terminals and 2 tubes L N SW Electronic Ballast SW Electronic Ballast BUS ON ON 50 cm OFF OFF BUS ON ON OFF OFF cm 50 cm 50 cm 943

31 LIPSO, EMERGENCY LIGHTING PILOTS >>> As easy to install as an ordinary switch Signalling Under normal conditions, a decorative element designed to integrate smoothly into any public building Signalling direct lighting to enhance the decor of the building Emergency with a direct lighting Emergency In the event of a power cut, a light path is created to guide the audience to the exit, the perfect complement to emergency lighting These products are part of emergency lighting systems > See p

32 Lipso self-contained emergency lighting pilots 230 V Lipso self-contained emergency lighting pilots dimensions Dimensions Lateral lighting Frontal lighting Self-contained emergency lighting pilots, certified to EN standard Frontal or lateral lighting Aluminium colour zamak finish Class II Leds requiring no maintenance as lamp sources: - For self-contained and centralized pilot lights: 4 high luminosity colour LEDs for signalling and indicating battery charge 3 high luminosity white LEDs for emergency lighting - For 230 V pilot lights: 7 high luminosity colour LEDs Duration: 1 hour Ni-Cd batteries: 2.4 V - 2/3 AAA Charging time: 24h Lumen output: 1.5 lm Screw terminals capacity for 2 x 1.5 mm 2 For installation in their own flush-mounting box, an 60/65 mm box or a plasterboard partition Installation: Flush-mounting on box Cat.No Ø 50 55, , Pack Cat.Nos Self-contained emergency lighting pilots 230 V 10 % - 50/60 Hz IP 44 - IK 07 Lateral Front lighting lighting White emergency lighting, and signalling in: Blue White Red Green Amber IP 66 - IK 08 White emergency lighting, and signalling in: Blue White 230 V lighting pilots IP 44 - IK 07 Lateral Front For 230 VA mains voltage only, with lighting lighting 7 signalling LEDs in: Blue White Accessories Flush-mounting box Adaptor frame for 60/65 mm box Adaptor for plasterboard partition Round frame 68 mm Square frame 68 x 68 mm Accessories: Flush-mounting on 60/65 mm box with box adaptor frame Cat.No Ø Flush-mounting for prefabricated partitions Cat.No Ø mini 30 maxi Flush-mounting on box Cat.No with round frame Cat.No Ø Ø 78 Flush-mounting on box Cat.No with square frame Cat.No Ø These products are part of emergency lighting systems > See p

33 twin spot lights self-contained emergency lighting luminaires halogen spot lights self-contained emergency lighting luminaires Pack Cat.Nos Twin 20 W halogen spot lights non-maintained luminaires Ideal for lighting large open areas or undefined, escape routes Particularly suitable for factory or warehouse areas where premises have high ceilings Certified to IEC and EN Power supply: 230/240 V - 50/60 Hz Steel housing is white epoxy power coated to ensure corrosion resistance Supplied with 2 x 20 W halogen lamps Lumen output: 2 x 400 lm Maintenance free sealed lead acid battery (12 V - 7 Ah, Cat.No ), (1 for 1 h duration, 2 for 3 h duration) Recharge time: 24 h nominal (14 h for 1 h duration) Cable entry: 20 mm conduit knockout at one end Operating temperature: 0 to 25 C BBK h h Pack Cat.Nos Halogen spot lights non-maintained IP 55/IP 45 luminaires Certified to EN standard Power supply: 230 V +6-10% - 50/60 Hz Lamp and emergency operation with a push-button Ni Cd batteries, high temperature type Recharge time: 24 hours Charge monitor with a green LED Grey colour enclosure 2 lamps IP Lumens output Lamp IP x 35 W IP x 65 W 946

34 twin spot lights self-contained emergency lighting luminaires Twin 20 W halogen spot lights non-maintained luminaires Dimensions (in mm) Distribution of luminous intensity in cd/ lm Cat.No cd Distribution of flood light Elevation Elevation Maximum permitted spacing (in metres) to achieve 1 lux luminaire to wall Height (m) Elevation angle Luminaire to Luminaire Luminaire to wael m 8.0 m m 5.7 m m 3.5 m Figures are given for guidance purposes Height, "luminaire to luminaire" figures assume the spolights are mounted in a horizontal attitude, with front faces of each spot pointing at the noted elevation angle and away from each other "Luminaire to Wall" figures can be used to determine the extent of an escape route in any direction from the luminaire In both cases, the center line of the escape route is assumed to pass directly underneath the luminaire with the spots aimed along the centre line of the escape route 4000 cd Halogen spot lights non-maintained IP 55/IP 45 luminaires Dimensions (in mm) Cat.Nos /43 C D A B E Cat.Nos Dimensions (mm) A B C D E