JCB GROUNDHOG ENGINE SUSPENSION BRAKES ELECTRICAL SYSTEM TRANSMISSION OPERATOR ENVIRONMENT TURNING CIRCLE TYRES OPERATING WEIGHTS STANDARD EQUIPMENT
|
|
- Maximillian Long
- 5 years ago
- Views:
Transcription
1 CARGO CAPACITY: 500kg (1102lb) ENGINE POWER GROUNDHOG 4x4: 19.5kW (26hp) GROUNDHOG 6x4: 15.3kW (20.5hp) MAX. TRAVEL SPEED: GROUNDHOG 4x4: 50kph (31mph) (with Bear Claw tyres) GROUNDHOG 6x4: 29kph (18mph) B C F D E A STATIC DIMENSIONS mm (ft-in) A Overall length 2914 (9-7) B Max. height (over ROPS) 1954 (6-5) C Ground clearance 228 (0-9) D Overall width 1491 (4-11) E Wheel base 1950 (6-5) F Wheel track front and rear 1229 (4-0) Tipping angle degrees 55 Cargo deck Length mm (ft-in) 1046 (3-5) Width mm (ft-in) 1384 (4-6) Depth mm (ft-in) 235 (0-9) Capacity kg (lb) 500 (1102) Volume m³ (ft³) 1.34 (47)
2 ENGINE 3 Cylinder Diesel Capacity litres (in³) (62.7) Bore mm (in) 75 (2.9) Stroke mm (in) 77.6 (3.0) Aspiration Natural Cylinders 3 Rated power ISO (SAE J1995 Gross) Gross power kw (hp) 19.5 (26) Torque rating Gross torque Nm (lbf-ft) 60.5 (44.62) Exhaust emissions certified to EU NRMM 97/68/EC Stage 3A EPA Tier III. TRANSMISSION Continuously Variable Transmission (CVT) Gear selection High/Low/Reverse/Neutral Differential lock Rear hand selectable 4 wheel drive Selectable Road speed 0 to 50kph (0 to 31mph) (with Bear Claw tyres) TYRES Terratrac (Turf/Road), Polartrac (Intermediate off road) Front 23 x Rear 23 x Bear Claw (Off road) Front 25 x Rear 25 x SERVICE FILL CAPACITIES Fuel tank litres (gal) 39 (8.6) Engine oil sump & filter (max.) litres (gal) 2.6 (0.6) Transmission system Gearbox litres (gal) 1.2 (0.3) Transmission system Front diff litres (gal) 1.0 (0.2) Transmission system Rear diff litres (gal) 1.0 (0.2) Engine coolant system litres (gal) 4.0 (0.9) SUSPENSION Front: Independent Macpherson strut. Rear: Independent with trailing arm and variable rate springs. Service: Dual circuit hydraulic system with discs all round. Park brake: Lever with cable operation on rear callipers. BRAKES ELECTRICAL SYSTEM System voltage volt 12 Alternator output Amp hour 50 Battery capacity Amp hour 60 OPERATOR ENVIRONMENT Fully adjustable drivers seat, with fixed passenger seat. Glove box and storage space under passenger seat and bonnet. Side grab handles and also on ROPS frame passenger side. Good all round visibility. ROPS frame as standard. Clearance radius 7440mm (24ft 5in) TURNING CIRCLE OPERATING WEIGHTS Unladen weight (including fuel and fluids and ROPS frame) kg (lb) 850 (1875) Maximum payload (including 2 operators at 100kg each) kg (lb) 700 (1543) Towing capacity (Unbraked) kg (lb) 500 (1102) STANDARD EQUIPMENT Engine: Tier III compliant. Steering: Rack and pinion with a turning clearance circle of 7440mm (24ft 5in). Body: Steel front and underbody protection. Cargo Deck: 10 gauge floor plate steel load bay with fold-down and removable sides. Electrics: Basic front lights. ROPS frame. OPTIONAL EQUIPMENT ROPS mounted canopy. Hydraulic tip. Roadlights. Worklights. Front winch. Front tool mount. Trailer electrics and hitch. Rear towball. Hard or soft sided cab.
3 GROUNDCARE B2 B1 C E A G F D STATIC DIMENSIONS mm (ft-in) A Overall length 2800 (9-2) B1 Max. height 1179 (3-10) B2 Max. height (with ROPS) 1963 (6-5) B2 Max. height (with hard cab) 1963 (6-5) C Ground clearance 196 (0-8) D Overall width 1610 (5-3) D Overall width (with hard cab) 1610 (5-3) E Wheel base 2078 (6-10) F Wheel track front 1265 (4-2) G Wheel track rear 1210 (3-7) Tipping angle degrees 53 Cargo deck Length mm (ft-in) 1124 (3-8) Width mm (ft-in) 1280 (4-2) Depth mm (ft-in) 220 (0-9) Capacity kg (lb) 500 (1102) Volume m 3 (ft 3 ) 0.32 (11.3)
4 ENGINE 3 Cylinder Diesel Capacity litres (in 3 ) (46.5) Bore mm (in) 67 (2.6) Stroke mm (in) 72 (2.8) Aspiration Natural Cylinders 3 Rated power ISO (SAE J1995 Gross) Gross power kw (hp) 15.6 (20.9) Torque rating Gross torque Nm (lbf-ft) 50 (37) Exhaust emissions certified to 97/68/EC Stage II. TYRES Turf, Dirt Dog (Chevron), Scorpion (Knobbly), Bear Claw (Off road) Front x 10-8 Rear 4 25 x 12-9 SERVICE FILL CAPACITIES Fuel tank litres (gal) 20 (4.4) Engine oil sump & filter (max.) litres (gal) 3.05 (0.7) Transmission system litres (gal) 4.5 (1.0) Engine coolant system litres (gal) 3.5 (0.8) TRANSMISSION SUSPENSION Gear selection Differential lock Main drive through a kevlar drive belt for extended life Road speed Continuously Variable Transmission (CVT) Forward/Reverse/Neutral Hand operated as standard 0 to 29kph (0 to 18mph) Front: Independent spring over single arm swing shock. Rear: 4 high-flotation, low pressure tyres. BRAKES Service: Internal wet disc. Park brake: Hand operated.
5 ELECTRICAL SYSTEM System voltage volt 12 Alternator output Amp hour 60 Battery capacity Amp hour 20 OPERATING WEIGHTS Unladen weight (including fuel and fluids no ROPS) kg (lb) 630 (1388) Unladen weight (including fuel and fluids and ROPS) kg (lb) 665 (1466) Unladen weight (including fuel and fluids and hard cab) kg (lb) 820 (1808) Maximum payload (including 2 operators at 100kg each) kg (lb) 700 (1543) Towing capacity (Unbraked) kg (lb) 500 (1102) OPERATOR ENVIRONMENT Fully adjustable drivers seat, with fixed passenger seat. Open storage compartment with twin cup holder space. Easily accessible with spacious leg room, with side hand rails and protection. Good all round visibility. Optional ROPS structure with seatbelts. TURNING CIRCLE STANDARD EQUIPMENT Engine: Tier III compliant. Steering: Rack and pinion with a turning clearance circle of 8500mm (27ft 10in). Body: Adjustable drivers seat. Operator storage facilities. Cargo Deck: 16 gauge steel load bay. Electrics: Basic kit featuring front lights with horn. Clearance radius 8500mm (27ft 10in) OPTIONAL EQUIPMENT Worklight kit with front lights, horn and ROPS mounted worklights. Road light kit with front light, horn, worklights, indicators, fog light, reverse light and alarm and 12v power socket located at the front. Optional beacon and trailer socket and ball. ROPS frame (ISO 3471 and EN 13510) safety structure. Hard cab. Soft sided cab. Electric hoist. Hydraulic hoist. Nudge bar. Front towball.
6 A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into Britain s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of more than 650 dealers and agents, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the world s most impressive success stories. Printed in the UK on paper made from sustainable forests. The pulp used in the manufacture of this paper is made from renewable timber produced on a fully sustainable basis, and is bleached without the use of chlorine gas (ECF Elemental Chlorine Free). This paper is suitable for recycling. JCB Utility Products, Cecilly Mills, Oakamoor Road, Cheadle, Staffordshire, United Kingdom ST10 4QT Tel: +44 (0) Fax: +44 (0) JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5105 1/09 Issue 3
JCB LOADALL HiViz / HiViz
JCB LOADALL - HiViz / - HiViz MAX. PAYLOAD: MAX. LIFT HEIGHT:. tonnes (lb). metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A A H H D J E K D J E K B F B F G
More informationJCB BACKHOE LOADER MINI CX 4x4 SERIES II
MAX. ENGINE POWER: MAX. BAKHOE DIG DEPTH (STANDARD DIPPER): MAX. LOADER APAITY: 16.8kW (22.5hp) 2540mm (8ft 4in) 625kg (1378lb) A B G E F H D 1 STATI DIMENSIONS mm (ft-in) A Overall height to canopy 2170
More informationJCB MINI EXCAVATORS 8040 & 8045 ZTS
OPERATING WEIGHTS: NET ENGINE POWER: 4300 kg (9480 lb) & 4750 kg (10472 lb) 33.1 kw (45 hp) D F K C G L H E A B I J STATIC DIMENSIONS A Sprocket idler centres 1845 (6-1) 1990 (6-6) B Undercarriage overall
More informationMINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS
OPERATING WEIGHTS: 4300 kg (9480 lb), 4750 kg (10472 lb) & 5253 kg (11511lb) NET ENGINE POWER: 33.1 kw (45 hp) STATIC DIMENSIONS mm (ft-in) mm (ft-in) mm (ft-in) A Sprocket idler centres 1845 (6-1) 1990
More informationMini Excavator 8018 CTS
NEW Mini Excavator Operating Weight: 1822 kg (4016 lb) Net Engine Power: 14.2 kw (19 hp) A Product of Hard Work MINI EXCAVATORS OPERATING WEIGHT: 1822 kg (4016 lbs) NET ENGINE POWER: 14.2 kw (19hp) K D
More informationJCB LOADALL / /
MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A
More informationLOADALL / HiViz
LOADALL -/- HiViz MAX. PAYLOAD:. tonnes (lb) MAX. LIFT HEIGHT:. metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A - A - H H D J E K D J E K B F B F G G STATIC
More informationJCB FASTRAC 2155/2170
ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. C A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 m (ft-in) A Height to cab 2.88 (9-5) B
More informationFASTRAC 3200/3230 XTRA
ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB P-TRONIC TRANSMISSION. A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.17 (10-5) 3.09
More informationJCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS
JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS
More informationJCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS
OPERATING WEIGHT: 5919 lb (685 kg) 709 lb (317 kg) 8049 lb (3651 kg) NET ENGINE POWER: 6.8 hp (0.1 kw) 6.8 hp (0.1kW) 30.4 hp (.7 kw) Interim Tier IV D F K 805 C C G L H I A B E J STATIC DIMENSIONS ft-in
More informationJCB MIDI EXCAVATOR 8065 RTS
JCB MIDI EXCAVATOR OPERATING WEIGHT:, lb (,8 kg) NET ENGINE POWER:. hp (8. kw) Interim Tier IV D F K C G L H E A B I J STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers Rubber - (99) Sprocket Idler
More informationTELETRUK TLT30D 4x4 / TLT35D 4x4
ENGINE FUEL TYPE: DIESEL LIFT CAPACITY: UP TO 3.5 TONNES C A Q D B L K M E O P J H N G F STATIC DIMENSIONS Model TLT30D 4x4 TLT35D 4x4 A Lift height mm 4000 4350 B Free lift (standard) mm 1560 1350 C Height
More informationJCB MINI EXCAVATORS 8016 & 8018
JCB MINI EXCAVATORS & OPERATING WEIGHT: NET ENGINE POWER: 55 lbs (59 kg) & lbs ( kg) 9 HP (. kw) H I E F K C J A B D G L JCB MINI EXCAVATORS & STATIC DIMENSIONS Machine model A Sprocket idler centers -
More informationJCB MIDI EXCAVATOR 8085 ZTS
JCB MIDI EXCAVATOR OPERATING WEIGHT: 17,694 lb (8026 kg) NET ENGINE POWER: 53 hp (39.5 kw) Interim Tier IV F E L G G1 H M D N I J A B C K STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers 7-6 (2280)
More informationTRACKED EXCAVATOR JS145HD
MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track
More informationJCB TRACKED EXCAVATOR JS290LC TIER III
K I C D L M J F E A B H G STATIC DIMENSIONS Dimensions in ft-in (millimetres) LC A Track length on ground 13-1 (3990) B Undercarriage overall length 15-11 (4860) C Track gauge 8-6 (2600) D Width over tracks
More informationJCB BACKHOE LOADER 3C
MAX. ENGINE POWER 85hp (63kW) F E B C J H D A G STATIC DIMENSIONS JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All
More informationJCB WHEELED EXCAVATOR JS160W
MAX. OPERATING WEIGHT NETT ENGINE POWER 17770kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width between dual wheels 2490 (8-2) C Ground
More informationJCB WHEELED EXCAVATOR JS145W
MAX. OPERATING WEIGHT NETT ENGINE POWER 15145kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width over dual wheels 2490 (8-2) C Ground
More informationJCB LOADALLS 506C, 506C HL, 508C SPEC LIFT AND PLACE TELESCOPIC HANDLERS. Construction Equipment. Courtesy of Crane.Market
C LOADALLS 06C, 06C HL, 08C SPC LIT AND PLAC TLSCOPIC HANDLRS Construction quipment C TLSCOPIC HANDLR 06C MAX. PAYLOAD: 6000lbs (2722kg) MAX. LIT HIGHT: 36ft 0in (11.0 meters) C TLSCOPIC HANDLR 06C C A
More informationJCB BACKHOE LOADER 2CX 12 FT
JCB BACKHOE LOADER 1 FT B C F E H D A G STATIC DIMENSIONS JCB 1FT features four wheel drive, four wheel steering, four equal sized tires, a heavy duty one piece mainframe, componentized driveline and fully
More informationWHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER
MAX. OPERATING WEIGHT: MATERIALS HANDLER 25825kg (56934lb) SCRAP HANDLER 25712kg (56685lb) ENGINE POWER: 128kW (172hp) H A H A L L F B F B J I G J I G E C D K E C D K STATIC DIMENSIONS MATERIALS HANDLER
More informationJCB BACKHOE LOADER 2CX AIRMASTER
MAX. ENGINE POWER 51.5kW (69hp) E D C B F A G STATIC DIMENSIONS JCB Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component
More informationTRACKED EXCAVATOR JS460 LONG REACH
MAX. OPERATING WEIGHT: 51408 kg (113335 lb) GROSS ENGINE POWER: 228 kw (305 hp) E K D G F L M H C I J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4400 (14-4) B Undercarriage
More informationJCB WHEELED EXCAVATOR JS175W MONOBOOM & TAB
MAX. OPERATING WEIGHT NETT ENGINE POWER 18120 kg (39948 lb) 128 kw (172 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External
More informationJCB WHEELED EXCAVATOR JS145W MONOBOOM & TAB
MAX. OPERATING WEIGHT NETT ENGINE POWER 15145 kg (33389 lb) 92 kw (123 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External
More informationJCB BACKHOE LOADER 3CX SITEMASTER
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 56kW (75hp) or 68.5kW (92hp) 5.46 metres (17ft 11in) MAX. LOADER CAPACITY: 1.0m 3 (1.32yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature
More informationA Product of Hard Work COMPACT LOADING SHOVEL 403
A Product of Hard Work Go anywhere, do anything compact performance Compact dimensions allow the 403 to access restricted farm buildings and other sites Hydrostatic transmission makes it easy for anyone
More informationA Product of Hard Work ROUGH TERRAIN FORK LIFT
A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro
More informationJCB MINI EXCAVATORS 8016 & 8018
JCB MINI EXCAVATORS & OPERATING WEIGHT: NETT ENGINE POWER: 59 kg (55 lbs) & kg ( lbs). kw (9 hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model A Sprocket idler centres 7 (-) 7 (-) B Undercarriage
More informationWHEELED EXCAVATOR JS200W
WHEELED EXCAVATOR S2W MAX. OPERATING WEIGHT: MONO 2322kg (51151lbs) / TAB 23273kg (5138lbs) ENGINE POWER: 128kW (172hp) G E F S2W W S 2 I H S 2 W D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in)
More informationJCB BACKHOE LOADER 3CX CONTRACTOR
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 74.5kW (100hp) 5.46 metres (17ft 11in) MAX. LOADER CAPACITY: 1.0m 3 (1.32yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one
More informationMINI EXCAVATORS 8014/8016/8020 CTS
MINI EXCAVATORS // CTS OPERATING WEIGHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NETT ENGINE POWER:. kw (9hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model CTS CTS CTS mm (ft-in)
More informationJCB TRACKED EXCAVATOR JS 460L
MAX. OPERATING WEIGHT: NETT ENGINE POWER: 46820kg (103220lb) 228kW (305hp) E I H K J F M G L C D A B STATIC DIMENSIONS m (ft-in) A Track length on ground 4.40 (14-14) B Undercarriage overall length 5.38
More informationJCB BACKHOE LOADER 3CX SUPER SITEMASTER
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 68.6kW (92hp) 5.93 metres (19ft 5in) MAX. LOADER CAPACITY: 1.0m 3 (1.32yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one
More informationRough Terrain Fork Lift
ROUGH TERRAIN FORK LIFT Rough Terrain Fork Lift Engine Power: 55kW (74hp) Operating Capacity: 2.6 to 4 tonnes Operating Weight: 5910kg to 7500kg Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes
More informationJCB BACKHOE LOADER 4CX
JCB BACKHOE LOADER MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 74.2kW (100hp) 4.67 metres (15ft 4in) MAX. LOADER CAPACITY: 1.3m 3 (1.7yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature
More informationWHEELED EXCAVATOR JS175W
WHEELED EXCAVATOR SW MAX. OPERATING WEIGHT: 820 kg (39948 lb) ENGINE POWER: 28 kw (2 hp) G E F SW W S I H D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels
More informationJCB BACKHOE LOADER 4CX SITEMASTER
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 74.2kW (100hp) 5.88 metres (19ft 4in) MAX. LOADER CAPACITY: 1.3m 3 (1.70yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one
More informationJCB BACKHOE LOADER 3CX CONTRACTOR
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 74.2kW (100hp) 5.97 metres (19ft 7in) MAX. LOADER CAPACITY: 1.0m 3 (1.32yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one
More informationSKID STEER LOADER 135 HD/155 HD
SKID STEER LOADER 135 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 34 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH
More informationJCB TRACKED EXCAVATOR JS 460LC
MAX. OPERATING WEIGHT: NET ENGINE POWER: 103220lb (46820kg) 305hp (228kW) E I H J F K M L C D A B STATIC DIMENSIONS ft-in (m) ft-in (m) A Track length on ground 14-5 (4.40) G Counterweight clearance 4-6
More informationTRACKED EXCAVATOR JS360 LONG REACH
MAX. OPERATING WEIGHT: 42150 kg (92925) lb NETT ENGINE POWER: TIER 3 202 kw (271 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4021 (13-2)
More informationJCB BACKHOE LOADER 3CX
14FT 14FT STATIC DIMENSIONS JCB Backhoe Loaders feature a heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All fluid and component compartments are lockable
More informationAn All-Terrain, All-Weather, All-Fire Class, First Response Compact Fire Vehicle.
An All-Terrain, All-Weather, All-Fire Class, First Response Compact Fire Vehicle. 2 3 RescueMax Two leading quality technologies; one first-class WORKMAX all terrain fire response vehicle, one low pressure
More informationJCB TRACKED EXCAVATOR JS 330 LONG REACH
MAX. OPERATING WEIGHT NETT ENGINE POWER 3990 kg (7973 lb) TIER 3 0 kw (71 hp) TIER 17 kw (39 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground
More informationJCB JS 130 TRACKED EXCAVATOR
JCB JS 130 TRACKED EXCAVATOR MAX. OPERATING WEIGHT: 13900 kg NETT ENGINE POWER: 63 kw (85 hp) GENERAL SPECIFICATION STATIC DIMENSIONS J D E K F F C G L A B H I Dimensions in millimetres (ft. in.) A Track
More informationJCB MINI EXCAVATORS 8014 / 8016 / 8018 / 8020
J MINI XVTORS / / / OPRTIN WIHT: NTT NIN POWR: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs). kw (9hp) K L H I J STTI IMNSIONS Machine model mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in) Sprocket
More informationCOMPACT TRACK LOADER. From World First to World Leader
COMPACT TRACK LOADER From World First to World Leader TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After
More informationROPS and FOPS canopy provides A large comfortable operators area. Machines with a cab get air conditioning as standard
Fully tilting hood for easy engine access designed to get your job done. Tier 3 94hp (70kw) charge air cooled engine for smooth and economical operation ROPS and FOPS canopy provides A large comfortable
More informationA Product of Hard Work BACKHOE LOADER 1CX SERIES
A Product of Hard Work BAKHOE LOADER X SERIES Big solution in a small package Superb manoeuvrability lets you operate in tight areas Wide choice of loader and backhoe attachments increases versatility
More information8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW
8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW STRENGTH, DURABILITY & PRODUCTIVITY THE MIDI EXCAVATOR FROM JCB OFFERS COMPACT, VERSATILE PERFORMANCE. EXPERIENCE SUPERB LEVELS
More informationJCB TRACKED EXCAVATOR JS220 LONG REACH
MAX. OPERATING WEIGHT NETT ENGINE POWER 22100 kg 102 kw (138 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 3660 (12-0) B Undercarriage overall
More information9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")
9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator
More informationJCB TRACKED EXCAVATOR JZ 70
MAX. OPERATING WEIGHT NETT ENGINE POWER 8000kg kw (58hp) D E L F M C G H I A B K STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 00 (7-) B Undercarriage overall length 830
More informationTL12V-2 COMPACT TRACK LOADER. Operating Weight: 5,985 kg. From World First to World Leader
COMPACT TRACK LOADER TL12V-2 From World First to World Leader Operating Weight: 5,985 kg Product Features && Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - Turbocharged and Intercooled
More informationJCB TRACKED EXCAVATOR JS 200 NC/SC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 21190 kg (46716 lb) 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NC SC LC A Track length on ground 3370 (11-1) 3370
More informationJCB FASTRAC 3200/3230
FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. STATIC DIMENSIONS A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.15
More informationJCB TRACKED EXCAVATOR JS130 LC
MAX. OPERATING WEIGHT MAX. ENGINE POWER 13428 kg (29604 lb) 73 kw (98 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2865 (9-5) B Undercarriage
More information303E CR. Mini Hydraulic Excavator
303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E
More informationJCB TRACKED EXCAVATOR JS 235 HD
MAX. OPERATING WEIGHT NETT ENGINE POWER 24222 kg (53400 lb) 128 kw (172 hp) E I H K J F L M G C D B A STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 3420 (11-3) B Undercarriage
More informationWheeled Loading Shovel 403. Max. engine power: 28kW (37.5hp) Max. operating weight: 2115kg Max. loader capacity: 0.3m³
Wheeled Loading Shovel 403 Max. engine power: 28kW (37.5hp) Max. operating weight: 2115kg Max. loader capacity: 0.3m³ Go anywhere, do anything compact performance Compact dimensions allow the 403 to access
More informationTRACKED EXCAVATOR JS220 NC/SC/LC
MAX. OPERATING WEIGHT: 22550 kg (49714 lb) NETT ENGINE POWER: 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS220 NC/SC/LC MONOBOOM Dimensions in millimetres (ft-in) NC SC LC A Track length
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationThose in the know, know Takeuchi. TL12V2 Track Loader TL12V2
Those in the know, know Takeuchi TL12V2 Track Loader TL8 TL10 TL12 TL12V2 ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After Treatment - Active
More informationJCB WHEELED LOADING SHOVEL 426 ZX
MAX. ENGINE POWER: MAX. OPERATING WEIGHT: 113kW (152hp) 14120kg (31135lb) MAX. LOADER CAPACITY: 2.7m 3 (3.5yd 3 ) G J F E H1 H B C D A STATIC DIMENSIONS mm (ft-in) A Overall length with standard bucket
More informationTELESCOPIC ARTICULATED LOADERS T750
TELESCOPIC ARTICULATED LOADERS T750 PERFORMANCE POWER and PERFORMANCE REACH NEW HEIGHTS WITH GEHL 4'8" EXTENSION EXTENDED HEIGHT A telescopic lift arm takes maximum lift height from 12'10" (3911 mm) and
More informationSKID STEER LOADER 135 HD/155 HD
SKID STEER LOADER 15 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 4 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH
More informationJCB TRACKED EXCAVATOR JS160 NLC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg (39518 lb) 92 kw (123 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS160 NLC/LC MONOBOOM Dimensions in millimetres (ft-in) NLC LC A Track length on ground
More informationTLB840R. Tier 4 final 74hp (55kw) charge air cooled engine for smooth and economical operation designed to get your job done.
TLB840R Fully tilting hood for easy engine access Tier 4 final 74hp (55kw) charge air cooled engine for smooth and economical operation designed to get your job done. Solid cast nose provides improved
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Specifications TOUGH, POWERFUL, RELIABLE Pressure Relieving Coupler Flat Faced Couplers High Flow Hydraulics
More informationJCB TRACKED EXCAVATOR JS 330 LC/NLC TIER 3
TIER 3 MAX. OPERATING WEIGHT NETT ENGINE POWER 33288 kg (73387 lb) 202 kw (271 hp) I E H M N J F K L G C D A B STATIC DIMENSIONS JS330 LC/NLC MONOBOOM Dimensions in millimetres (ft-in) LC NLC A Track length
More informationWORKMAN GTX UTILITY VEHICLE SIMPLY SUPERIOR
UTILITY VEHICLE SIMPLY SUPERIOR SIMPLY SUPERIOR We set out to build a utility vehicle that is simply superior to the rest. The result is the grounds and turf crossover Workman GTX. It boasts an unequalled
More informationMODEL Mechron2200 Mechron 2200PS Mechron2240 ENGINE CANOPY/WINDSHIELD DRIVE TRAIN HITCH HYDRAULICS SUSPENSION STEERING PROTECTION
2200 / 2240 Where Work and play come Together MECHRON The MECHRON Whether you need a worker on the farm or a way into the woods, the KIOTI MECHRON 4X4 Utility Vehicle gets all your jobs done. With 4-wheel,
More informationTRACKED EXCAVATOR JZ140HD
J Z1 TRACKED EXCAVATOR JZ140HD MAX. OPERATING WEIGHT: 17409 kg ENGINE POWER: 73 kw (98 hp) E I H K J F JZ140 HD 4 0HD L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on
More information303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp
303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E
More informationNET HORSEPOWER 40.3 kw rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SKID STEER LOADER. Photos may include optional equipment.
NET HORSEPOWER 40.3 kw 54 HP @ 2800 rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SK 820 SKID STEER LOADER Photos may include optional equipment. SK820-5 S KID S TEER L O ADER WALK-AROUND Maximum Performance
More informationTechnical Specifications
140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus
More informationTRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.
TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional
More informationJCB TRACKED EXCAVATOR JS130 LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 15200 kg 70 kw (94 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2780 (9-1) B Undercarriage overall
More informationDL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
More informationSKID STEER LOADER From World First to World Leader
TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance
More informationJCB TRACKED EXCAVATOR JS160 NLC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NLC LC A Track length on ground 3090 (10-2) 3090 (10-2) B Undercarriage
More informationWA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.
WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL
More informationWith Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Product Features & Specifications ENGINE --Four Cylinder Turbocharged Deutz Diesel Engine -U.S. - EPA FINAL
More informationTL12R-2 COMPACT TRACK LOADER. Operating Weight: 5,710 kg. From World First to World Leader
COMPACT TRACK LOADER TL12R-2 From World First to World Leader Operating Weight: 5,710 kg Product Features & Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - Turbocharged and Intercooled
More informationGO ANYWHERE DO ANYTHING SCOUT SC-50 TRACKED UTILITY VEHICLE
GO ANYWHERE DO ANYTHING SCOUT SC-50 TRACKED UTILITY VEHICLE THERE ARE NO BOUNDARIES At home, on a jobsite, working your ranch or grooming trails, the Scout can take you there like no other vehicle. This
More informationJCB TRACKED EXCAVATOR - Tier 4i JS 330 LC
MAX OPERATING WEIGHT: 73,37 lb (33,2 kg) NET ENGINE POWER: 29 hp (200 kw) E I H M N J F K L G C A STATIC DIMENSIONS Dimensions in ft-in (mm) LC A Track Length on Ground 12- (39) B Undercarriage Overall
More informationTRACKED EXCAVATOR JZ140 LC
TRACKED EXCAVATOR LC MAX. OPERATING WEIGHT: 589 kg (353 lb) 665 kg (3677 lb) WITH BLADE MAX. ENGINE POWER: 73 kw (98 hp) E I H K F HD HD L M G C D A B STATIC DIMENSIONS MONOBOOM Dimensions in millimetres
More informationTL8 Compact Track Loader
Those in the know, know Takeuchi TL8 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After
More information906H. Compact Wheel Loaders
906H Compact Wheel Loaders Cat Cat C3.4 Engine Net Power (SAE J1349) 52 kw 70 hp Weights Operating Weight 5630 kg 12,412 lb Buckets Bucket Capacities 0.75 1.2 m 3 1.0 1.6 yd 3 906H Features Loader Linkage
More informationWith Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal
More informationCat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.
Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator
More informationTRACKED EXCAVATOR JS115
1 5 TRACKED EXCAVATOR JS115 MAX. OPERATING WEIGHT: 12962 kg (28576 lb) MAX. ENGINE POWER: 73 kw (98 hp) E I H K J F J S1 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length
More informationL1361 KUBOTA DIESEL TRACTOR
L KUBOTA DIESEL TRACTOR L1361 The L1361 is a versatile and easy to operate utility tractor with a powerful engine and a choice of manual or HST transmission. Introducing Kubota s all-new L1361, providing
More informationDX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
More informationJCB TRACKED EXCAVATOR JZ140
MAX. OPERATING WEIGHT NETT ENGINE POWER 15961 kg (16751 kg WITH STABILISING BLADE) 72.8 kw (97.6 hp) E I H K J F JZ140 J Z 1 4 0 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More information