JCB MINI EXCAVATORS 8016 & 8018
|
|
- Pearl Williams
- 5 years ago
- Views:
Transcription
1 JCB MINI EXCAVATORS & OPERATING WEIGHT: NETT ENGINE POWER: 59 kg (55 lbs) & kg ( lbs). kw (9 hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model A Sprocket idler centres 7 (-) 7 (-) B Undercarriage overall length (5-) (5-) C Kingpost clearance 7 (-) 7 (-) D Tailswing radius (- ) (- ) E Overall width of superstructure 9 (- ) 9 (- ) F Height over cab (7-7) (7-7) G Ground clearance 5 (-) 5 (-) H Track gauge 7 (-5) 75 to (-5 to -7 ) Machine model I Width over tracks (retracted) 97 (-) 9 (- ) Width over tracks (extended) N/A (-5) J Transport length Standard dipper (- ) (- ) J Transport length Long dipper (- ) 5 (-) J Transport length Gravemaster dipper N/A 9 (- ) K Transport height with FOGS guard (7-7) (7-7) K Transport height without FOGS guard (7- ) (7- ) L Track height (-) (-)
2 JCB MINI EXCAVATORS & ENGINE Machine Model & Model C- Fuel Diesel Cooling Water cooled Gross power ISO 9 kw rpm.7 (9.7) Nett power kw rpm. (9) Gross torque ISO 9 Nm (lbf rpm. (7.) Nett torque Nm (lbf rpm (5.7) Displacement cc Gradeability degrees 5 Starter motor kw (hp). (.) Battery volt / Ampere/hour v / Ah Alternator amps HYDRAULIC SYSTEM Standard gear pump Optional variable pump Pump Triple section Gear Variable ( Ports) / Gear Nominal output lpm 9. (.5 x.5 x.).5 (.9 x.9 x.7) Nominal output UK gal/min. (.95 x.95 x.7) 9. (.5 x.5 x.) Excavator/track main relief bar (psi) () () Slew main relief bar (psi) () () Auxiliary hydraulic flow litres (UK gal).9 (5.9) 9. (.5) Hydraulic motors Piston Piston UNDERCARRIAGE Machine model No of bottom rollers Track width mm (in) (9) (9) Ground bearing pressure kg/cm (lb/in ). (.7). (.55) Ground clearance mm (in) 5 () 5 () Track tensioning Grease Grease Travel speed low kph (mph) (.) (.) Travel speed high kph (mph). (.). (.) Tractive effort kn (lbf). (5). (5) HYDRAULIC SYSTEM Standard gear pump Optional variable pump Pump Triple section Gear Variable ( Ports) / Gear Nominal output lpm. (5.7 x 5.7 x.).9 (7. x 7. x.7) Nominal output UK gal/min 9. (.5 x.5 x.). (.75 x.75 x.) Excavator/track main relief bar (psi) () () Slew main relief bar (psi) () () Auxiliary hydraulic flow litres (UK gal). (.9). (7.5) Hydraulic motors Piston Piston
3 JCB MINI EXCAVATORS & STANDARD EQUIPMENT ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, ISO servo controls, static seat, boom worklight, double acting auxiliary circuit, boom ram protection, triple section gear pump, dozer blade, mm (ft-in) dipper. STANDARD EQUIPMENT ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, speed auto-shift tracking, hydraulically extending undercarriage, ISO servo controls, static seat, boom worklight, double acting auxiliary circuit, boom ram protection, triple section gear pump, extendable dozer blade, mm (ft-in) dipper. OPTIONAL EQUIPMENT ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas strut assisted front screen), suspension seat, dual pattern controls (ISO/SAE change-over), cab/canopy mounted worklights, long dipper, speed auto-shift tracking, long dozer blade, dipper pipework, hand held tool circuit, variable displacement pump, engine fan guard kit, FOGS roof guard, mirror, track pedals, toolkit, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, Datatag (UK, Italy and Holland only), travel alarm, immobiliser, yellow roof moulding, 9 digging buckets mm to 7mm (in to in)), ditching/grading buckets (9mm & mm (5in and 9in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter. OPTIONAL EQUIPMENT ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas strut assisted front screen), suspension seat, dual pattern controls (ISO/SAE change-over), cab/canopy mounted worklights, long dipper, 5mm (ft-in) Gravemaster dipper*, long dozer blade, dipper pipework, hand held tool circuit, variable displacement pump, engine fan guard kit, FOGS roof guard, mirror, track pedals, toolkit, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, Datatag (UK, Italy and Holland only), travel alarm, immobiliser, yellow roof moulding, 9 digging buckets (mm to 7mm (in to in)), ditching/grading buckets (9mm & mm (5in and 9in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter. * Auxiliary pipework is not available with Gravemaster dipper option. I J H
4 JCB MINI EXCAVATORS & A B A B D F E D F E - - C G - - C G Metres Metres Feet Feet Machine model Dipper length (-) (-) A Max digging reach 7 (-7) 9 (-) B Max digging reach on ground 7 (-) 7 (-7 ) C Max digging depth dozer up (- ) (7- ) Max digging depth dozer down 57 (7-9) 57 (-) D Max digging height 9 (-) 5 (-) E Max dump height 5 (- ) 559 (-5) F Max height to dipper nose pivot pin 9 (9-7) 95 (9-9) G Max vertical wallcut depth 59 (5-5) 75 (5-9) H Min. front swing radius (no offset) (5- ) 5 (5-) Min. front swing radius (fully offset) 57 (-9) (-) I Boom swing left degrees J Boom swing right degrees Bucket rotation degrees 9 9 Dipper rotation degrees Bucket tearout kn (lbf). (). () Dipper tearout kn (lbf) (79) 7.5 () Slew speed rpm Machine model Dipper length (-) (-) 5 (-) A Max digging reach 9 (-) (- ) 5 (- ) B Max digging reach on ground 5 (-) 99 (-) (- ) C Max digging depth dozer up (7-) (7-) 77 (- ) Max digging depth dozer down 7 (-) 57 (-5) 5 (9- ) D Max digging height (-) 59 (- ) (-) E Max dump height 5 (-5) (-7) 75 (9- ) F Max height to dipper nose pivot pin 97 (9-9) (9-) 7 (- ) G Max vertical wallcut depth 75 (5-9) 5 (- ) (-) H Min. front swing radius (no offset) 75 (5-7 ) 79 (5- ) 79 (5- ) Min. front swing radius (fully offset) 59 (5-) 55 (5-) 57 (5-) I Boom swing left degrees J Boom swing right degrees Bucket rotation degrees Dipper rotation degrees Bucket tearout kn (lbf). (). () Dipper tearout kn (lbf) 9. (). () Slew speed rpm
5 JCB MINI EXCAVATORS & LIFT CAPACITIES Standard Dozer, mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.m (ft in).5m (ft in) m (ft 7in).5m (ft in) Capacity at maximum reach Height Dozer up Dozer down Dozer up Dozer down Dozer up Dozer down Dozer up Dozer down Dozer up Dozer down m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg.5 (-) * 5* 7* * (-7 ) (-) 99* 5* 99* * 7* 97* * 9 9* 77 (-).5 (-) 55 9* 9 5* 7 * 7 * 9 (-) Ground Level 59 9* * * 9 9* 7 7 * 5 (-).5 (-) 5 * 5 79* 5 7 5* 5 * 5 7* 7 (9-) (-) 5 7* * 9 5* 9* 9* 5 (-) LIFT CAPACITIES Standard Dozer, mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.m (ft in).5m (ft in) m (ft 7in).5m (ft in) Capacity at maximum reach Height Dozer up Dozer down Retracted Extended Dozer up Dozer down Retracted Extended Dozer up Dozer down Retracted Extended Dozer up Dozer down Retracted Extended Dozer up Dozer down Retracted Extended Distance m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg.5 (-) * * * 7* 7 * 5* (-) (-) 5* 5* 5* * 5* 5* 5* * 59* 7* 5* 5* 7* 5* 5 (-5 ).5 (-) * 57* 9 5* 9 5* * 7 5* * 7 7* (-5 ) Ground Level 77 7* 5* 5 5* 7* 7* 9 5* 7* (- ).5 (-) 9* * 5 7 5* 5 7* 7 9* 5 (- ) (-) 7* 7 55 * 7 557* 9* 79 9 * (9-) Lift capacity front and rear. Lift capacity full circle. Notes:. Lifting capacities are based on ISO 57, that is: 75% of minimum tipping load or 7% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.. Lift capacities assume that the machine is on firm, level ground and equipped with an approved lifting point.. A bucket must be fitted when lifting, the weight of this bucket must be deducted from the above lift capacities.. Lift capacities may be limited by local regulations. Please refer to your dealer.
6 JCB MINI EXCAVATORS & OPERATOR ENVIRONMENT External Internal Cab/canopy height with FOGS guard (7-7) 9 (7-5) Cab/canopy height no FOGS guard (7- ) 9 (7-5) Cab/canopy length 7 (-) 7 (-) Cab/canopy width 97 (-) (-) Distance from seat base to roof (-) Door aperture width (- ) MACHINE WEIGHTS Machine model Operating weight* kg (lb) 59 (55) () Transport weight kg (lb) 55 () 57 (99) With canopy kg (lb) - (-7) - (-7) With FOGS guard kg (lb) +5 (+55) +5 (+55) With long dipper kg (lb) + (+ ) + (+ ) With Gravemaster dipper kg (lb) N/A +7 (+5 ) *Operating weight to ISO including cab, rubber tracks, standard dipper, mm (in) bucket, full tanks and a 75kg (5lb) operator. SERVICE CAPACITIES Machine model Fuel tank litres (UK gal).5 (5.).5 (5.) Engine coolant litres (UK gal) 5 (.) 5 (.) Engine oil litres (UK gal) (.9) (.9) Hydraulic system litres (UK gal) (.) (.) Hydraulic tank litres (UK gal) 5 (5.5) 5 (5.5) DOZER BLADE Machine model Standard Long Standard Long Max height (above ground) 7 (-7) 7 (- ) 7 (-7) 7 (- ) Dig depth (below ground) 9 (- ) (-5 ) 9 (- ) (-5 ) Approach angle degrees Width (-) (-) (-) (-) Width (extended) N/A N/A (- ) (- ) Height 5 (-9) 7 (- ) 5 (-9) 7 (- ) Reach in front of tracks (-) (-5 ) (-) (-5 ) JCB cares for the environment. This paper has been JCB Sales Limited, Rocester, Staffordshire ST 5JP. Tel: Fax: Web: produced without the use of elemental chlorine chemicals in the bleaching process. JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5 /5
MINI EXCAVATORS 8014/8016/8020 CTS
MINI EXCAVATORS // CTS OPERATING WEIGHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NETT ENGINE POWER:. kw (9hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model CTS CTS CTS mm (ft-in)
More informationMini Excavator 8018 CTS
NEW Mini Excavator Operating Weight: 1822 kg (4016 lb) Net Engine Power: 14.2 kw (19 hp) A Product of Hard Work MINI EXCAVATORS OPERATING WEIGHT: 1822 kg (4016 lbs) NET ENGINE POWER: 14.2 kw (19hp) K D
More informationJCB MINI EXCAVATORS 8016 & 8018
JCB MINI EXCAVATORS & OPERATING WEIGHT: NET ENGINE POWER: 55 lbs (59 kg) & lbs ( kg) 9 HP (. kw) H I E F K C J A B D G L JCB MINI EXCAVATORS & STATIC DIMENSIONS Machine model A Sprocket idler centers -
More informationJCB MINI EXCAVATORS 8040 & 8045 ZTS
OPERATING WEIGHTS: NET ENGINE POWER: 4300 kg (9480 lb) & 4750 kg (10472 lb) 33.1 kw (45 hp) D F K C G L H E A B I J STATIC DIMENSIONS A Sprocket idler centres 1845 (6-1) 1990 (6-6) B Undercarriage overall
More informationMINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS
OPERATING WEIGHTS: 4300 kg (9480 lb), 4750 kg (10472 lb) & 5253 kg (11511lb) NET ENGINE POWER: 33.1 kw (45 hp) STATIC DIMENSIONS mm (ft-in) mm (ft-in) mm (ft-in) A Sprocket idler centres 1845 (6-1) 1990
More informationJCB MINI EXCAVATORS 8014 / 8016 / 8018 / 8020
J MINI XVTORS / / / OPRTIN WIHT: NTT NIN POWR: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs). kw (9hp) K L H I J STTI IMNSIONS Machine model mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in) Sprocket
More informationMINI EXCAVATORS 8014/8016/8018/8020 CTS
MINI XVTORS /// TS OPRTIN WIHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NTT NIN POWR:. kw (9hp) K L H I J STTI IMNSIONS Machine model TS TS TS TS mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in)
More informationJCB MIDI EXCAVATOR 8065 RTS
JCB MIDI EXCAVATOR OPERATING WEIGHT:, lb (,8 kg) NET ENGINE POWER:. hp (8. kw) Interim Tier IV D F K C G L H E A B I J STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers Rubber - (99) Sprocket Idler
More informationJCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS
OPERATING WEIGHT: 5919 lb (685 kg) 709 lb (317 kg) 8049 lb (3651 kg) NET ENGINE POWER: 6.8 hp (0.1 kw) 6.8 hp (0.1kW) 30.4 hp (.7 kw) Interim Tier IV D F K 805 C C G L H I A B E J STATIC DIMENSIONS ft-in
More informationMINI EXCAVATORS 8025, 8030, 8035 ZTS
MINI EXCAVATORS 8025, 8030, 8035 ZTS Operating weight: 2806 kg / 3217 kg / 3651 kg Net engine power: 20 kw / 22.7 kw PRODUCTIVITY AND PERFORMANCE. THE OFFER TRUE ZERO TAILSWING AND RECOGNISE THE NEED FOR
More information8018 CTS Mini Excavator
NEW 8018 CTS MINI EXCAVATOR Operating Weight: 1822kg Net Engine Power: 14.2kW QUALITY, RELIABILITY AND STRENGTH Small but tough, the JCB 8018 CTS is built to work. Like all JCBs, it boasts exceptional
More informationJCB MIDI EXCAVATOR 8085 ZTS
JCB MIDI EXCAVATOR OPERATING WEIGHT: 17,694 lb (8026 kg) NET ENGINE POWER: 53 hp (39.5 kw) Interim Tier IV F E L G G1 H M D N I J A B C K STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers 7-6 (2280)
More informationCOMPACT EXCAVATOR 8040, 8045 ZTS, 8050, 8055 RTS/ZTS
COMPACT EXCAVATOR 8040, 8045 ZTS, 8050, 8055 RTS/ZTS Operating weight: 400kg/4750kg/525kg/5500kg/5177kg Net engine power.1: kw PRODUCTIVITY AND PERFORMANCE. THERE ARE FIVE KEY THINGS EVERY CUSTOMER LOOKS
More information8014/8016 Conventional Tail Swing Mini Excavator
NEW 8014/8016 CTS MINI EXCAVATOR 8014/8016 Conventional Tail Swing Mini Excavator Operating Weight: 1634kg/1657kg Net Engine Power: 14.2kW QUALITY, RELIABILITY AND STRENGTH SMALL BUT TOUGH, OUR JCB 8014
More informationMINI EXCAVATOR 8026 CTS
NEW 8026 CTS MINI EXCAVATOR MINI EXCAVATOR 8026 CTS Operating weight: 2867kg (6321Ib) Net engine power: 16.5kW (22.1hp) MINI BUT MIGHTY NO ONE KNOWS BETTER THAN JCB HOW TO BUILD A ROBUST EXCAVATOR. THE
More informationNEW Conventional Tail Swing Compact Excavator
NEW 8018 Conventional Tail Swing Compact Excavator Operating Weight: 4017 lbs / 4557 lbs Net Engine Power: 19 HP QUALITY, RELIABILITY AND STRENGTH SMALL BUT TOUGH, OUR JCB 8018 COMPACT EXCAVATORS ARE BUILT
More informationMICRO EXCAVATORS 8008/8010 CTS
MICRO EXCAVATORS 8008/8010 CTS Operating weight: 950kg/1110kg Net engine power: 9.0kW/13.8kW PRODUCTIVITY AND PERFORMANCE. Class-leading power reduces time and manpower of labour-intensive digging jobs
More information8029 CTS Compact Excavator. Operating weight: 6321Ib (2867kg) Net engine power: 22.1hp (16.5kW)
8029 CTS Compact Excavator Operating weight: 6321Ib (2867kg) Net engine power: 22.1hp (16.5kW) MINI BUT MIGHTY NO ONE KNOWS BETTER THAN JCB HOW TO BUILD A ROBUST EXCAVATOR. THE 8029 CTS IS THE PRODUCT
More informationNEW 8029 CTS Compact Excavator
NEW 8029 CTS Compact Excavator Operating Weight: 6321Ib (2867kg) Net Engine Power: 22.1hp (16.5kW) Mini but mighty No one knows better than JCB how to build a robust excavator. The 8029 CTS is the product
More informationJCB MIDI EXCAVATOR l 8065
JCB MIDI EXCAVATOR l 8065 The new benchmark in 6-tonne midi performance THE MIDI EXCAVATOR With a reputation built on constant innovation and on producing machines that are always working for you and your
More informationJCB TRACKED EXCAVATOR JS290LC TIER III
K I C D L M J F E A B H G STATIC DIMENSIONS Dimensions in ft-in (millimetres) LC A Track length on ground 13-1 (3990) B Undercarriage overall length 15-11 (4860) C Track gauge 8-6 (2600) D Width over tracks
More informationMINI EXCAVATOR 16C-1/18Z-1/19C-1
MINI EXCAVATOR 6C-/8Z-/9C- Transport weight: 755-868kg Net engine power: 0.8kW CHOOSE TOUGH. 00% steel bodywork that withstands knocks but is cost effective to repair. THE NEW GENERATION JCB MINI EXCAVATORS
More informationMINI EXCAVATOR 18Z-1/19C-1/19C-1 PREMIUM
MINI EXCAVATOR 8Z-/9C-/9C- PREMIUM Transport weight: 755-868kg Net engine power: 0.8kW CHOOSING A EXCAVATOR TOUG A COMPACT R JUST GOT GHER 00% steel bodywork that withstands knocks but is cost effective
More informationMINI EXCAVATOR 18Z-1/19C-1/19C-1 EP
MINI EXCAVATOR 8Z-/C-/C- EP Transport weight: 7-868kg Net engine power: 0.8kW CHOOSING A COMPACT EXCAVATOR JUST GOT TOUGHER CHOOSE TOUGH CHOOSE TOUGH. THE NEW GENERATION JCB MINI EXCAVATORS HAVE BEEN DESIGNED
More informationTRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.
TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional
More informationTRACKED EXCAVATOR JS145HD
MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track
More informationMINI EXCAVATOR 15C-1/16C-1/18Z-1/19C-1/19C-1 PC
MINI EXCAVATOR 15C-1/16C-1/18Z-1/19C-1/19C-1 PC Transport weight: 1479-1868kg Net engine power: 10.8kW THE NEW GENERATION 1-2 TONNE COMPACT EXCAVATOR RANGE FROM JCB ENCOMPASSES FIVE MODELS INCLUDING FOUR
More informationJCB WHEELED EXCAVATOR JS160W
MAX. OPERATING WEIGHT NETT ENGINE POWER 17770kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width between dual wheels 2490 (8-2) C Ground
More informationJCB TRACKED EXCAVATOR JZ 70
MAX. OPERATING WEIGHT NETT ENGINE POWER 8000kg kw (58hp) D E L F M C G H I A B K STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 00 (7-) B Undercarriage overall length 830
More information301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Net Power 13.2 kw 17.7 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
More information301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Gross Power 17.9 kw 24.3 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
More informationJCB WHEELED EXCAVATOR JS145W
MAX. OPERATING WEIGHT NETT ENGINE POWER 15145kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width over dual wheels 2490 (8-2) C Ground
More informationTRACKED EXCAVATOR JS85. Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: m 3
TRACKED EXCAVATOR JS85 Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: 0.32 0.35m 3 STATIC DIMENSIONS K I L M J F E H G ENGINE Model Type Rated power (net) Torque Piston
More information303E CR. Mini Hydraulic Excavator
303E CR Mini Hydraulic Excavator Engine Weight Gross Power 18.5 kw 24.8 hp Operating Weight with Canopy 3048 kg 6,721 lb Net Power 17.5 kw 23.5 hp Operating Weight with Cab 3267 kg 7,204 lb The Cat 303E
More informationJCB WHEELED EXCAVATOR JS175W MONOBOOM & TAB
MAX. OPERATING WEIGHT NETT ENGINE POWER 18120 kg (39948 lb) 128 kw (172 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External
More informationJCB TRACKED EXCAVATOR JS 460L
MAX. OPERATING WEIGHT: NETT ENGINE POWER: 46820kg (103220lb) 228kW (305hp) E I H K J F M G L C D A B STATIC DIMENSIONS m (ft-in) A Track length on ground 4.40 (14-14) B Undercarriage overall length 5.38
More information303E CR. Mini Hydraulic Excavator. Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp
303E CR Mini Hydraulic Excavator Engine Gross Power 18.5 kw 24.8 hp Net Power 17.5 kw 23.5 hp Weight Operating Weight with Canopy 3310 kg 7,297 lb Operating Weight with Cab 3530 kg 7,782 lb The Cat 303E
More informationMINI EXCAVATOR 48Z-1/51R-1/55Z-1/57C-1
MINI EXCAVATOR 48Z-1/51R-1/55Z-1/57C-1 Operating weight: 4792/5112/5366/5483kg Net engine power: 33.1/33.4kW 51R-1 4 different power modes, auto idle and programmable auxiliary flows. 55Z-1 100% steel
More informationLOADALL / HiViz
LOADALL -/- HiViz MAX. PAYLOAD:. tonnes (lb) MAX. LIFT HEIGHT:. metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A - A - H H D J E K D J E K B F B F G G STATIC
More informationTB216 COMPACT EXCAVATOR. Operating Weight: 1,770 kg. From World First to World Leader
COMPACT EXCAVATOR TB216 From World First to World Leader Operating Weight: 1,770 kg Product Features & Specifications ENGINE - EPA Tier 4 Emission Compliant* - Engine Preheat - Extended Life Coolant -
More informationJCB WHEELED EXCAVATOR JS145W MONOBOOM & TAB
MAX. OPERATING WEIGHT NETT ENGINE POWER 15145 kg (33389 lb) 92 kw (123 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External
More informationJCB MIDI EXCAVATOR 8080ZTS
MX. OPERTING WEIGHT NETT ENGINE POWER 8250kg 44kW (58hp) E D L F1 F2 G M C H I K STTIC DIMENSIONS Dimensions in millimetres (ft-in) Track length on ground 2200 (7-3) Undercarriage overall length 2830 (9-3)
More informationMIDI EXCAVATOR 85Z-1/86C-1
MIDI EXCAVATOR 85Z-1/86C-1 Operating weight: 8300/8600kg Net engine power: 45.4kW QUALITY, RELIABILITY AND DURABILITY. AT JCB, WE VE BEEN BUILDING TRACKED EXCAVATORS FOR 50 YEARS. OUR LATEST 85Z AND 86C
More informationJCB LOADALL HiViz / HiViz
JCB LOADALL - HiViz / - HiViz MAX. PAYLOAD: MAX. LIFT HEIGHT:. tonnes (lb). metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A A H H D J E K D J E K B F B F G
More informationWHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER
MAX. OPERATING WEIGHT: MATERIALS HANDLER 25825kg (56934lb) SCRAP HANDLER 25712kg (56685lb) ENGINE POWER: 128kW (172hp) H A H A L L F B F B J I G J I G E C D K E C D K STATIC DIMENSIONS MATERIALS HANDLER
More informationTRACKED EXCAVATOR JS220 NC/SC/LC
MAX. OPERATING WEIGHT: 22550 kg (49714 lb) NETT ENGINE POWER: 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS220 NC/SC/LC MONOBOOM Dimensions in millimetres (ft-in) NC SC LC A Track length
More information301.7D CR. Mini Hydraulic Excavator
301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating
More informationJCB TRACKED EXCAVATOR JS 200 NC/SC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 21190 kg (46716 lb) 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NC SC LC A Track length on ground 3370 (11-1) 3370
More informationWHEELED EXCAVATOR JS175W
WHEELED EXCAVATOR SW MAX. OPERATING WEIGHT: 820 kg (39948 lb) ENGINE POWER: 28 kw (2 hp) G E F SW W S I H D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels
More informationJCB TRACKED EXCAVATOR JS 235 HD
MAX. OPERATING WEIGHT NETT ENGINE POWER 24222 kg (53400 lb) 128 kw (172 hp) E I H K J F L M G C D B A STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 3420 (11-3) B Undercarriage
More information308E2 CR SB. Mini Hydraulic Excavator with Swing Boom
308E2 CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model* Cat C3.3B Operating Weight with Cab 8400 kg 18,519 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications *Engine
More informationJCB TRACKED EXCAVATOR JS160 NLC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg (39518 lb) 92 kw (123 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS160 NLC/LC MONOBOOM Dimensions in millimetres (ft-in) NLC LC A Track length on ground
More informationJCB TRACKED EXCAVATOR JZ140
MAX. OPERATING WEIGHT NETT ENGINE POWER 15961 kg (16751 kg WITH STABILISING BLADE) 72.8 kw (97.6 hp) E I H K J F JZ140 J Z 1 4 0 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track
More informationTRACKED EXCAVATOR JS115
1 5 TRACKED EXCAVATOR JS115 MAX. OPERATING WEIGHT: 12962 kg (28576 lb) MAX. ENGINE POWER: 73 kw (98 hp) E I H K J F J S1 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length
More informationMini Hydraulic Excavator
302.5 Mini Hydraulic Excavator Cat 3013 Naturally Aspirated Diesel Engine Flywheel Power 17.1 kw 22.9 hp Operating Weight With canopy 2660 kg 5864 lb With cab 2783 kg 6135 lb 302.5 Mini Hydraulic Excavator
More informationWHEELED EXCAVATOR JS200W
WHEELED EXCAVATOR S2W MAX. OPERATING WEIGHT: MONO 2322kg (51151lbs) / TAB 23273kg (5138lbs) ENGINE POWER: 128kW (172hp) G E F S2W W S 2 I H S 2 W D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in)
More informationJCB TRACKED EXCAVATOR JS130 LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 15200 kg 70 kw (94 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2780 (9-1) B Undercarriage overall
More informationJCB TRACKED EXCAVATOR JS160 NLC/LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NLC LC A Track length on ground 3090 (10-2) 3090 (10-2) B Undercarriage
More informationJCB TRACKED EXCAVATOR JS 210 LC
MAX. OPERATING WEIGHT NETT ENGINE POWER 21675 kg 102 kw E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LC A Track length on ground 3660 (12-0) B Undercarriage overall length
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationJCB JS 130 TRACKED EXCAVATOR
JCB JS 130 TRACKED EXCAVATOR MAX. OPERATING WEIGHT: 13900 kg NETT ENGINE POWER: 63 kw (85 hp) GENERAL SPECIFICATION STATIC DIMENSIONS J D E K F F C G L A B H I Dimensions in millimetres (ft. in.) A Track
More informationTB225 COMPACT EXCAVATOR. Operating Weight: 2,400 kg. From World First to World Leader
COMPACT EXCAVATOR TB225 From World First to World Leader Operating Weight: 2,400 kg Product Features & Specifications ENGINE - Engine Preheat - Extended Life Coolant - Auto Deceleration - Double Element,
More informationMIDI EXCAVATOR 90Z-1/100C-1. broekveldt.nl
MIDI EXCAVATOR 90Z-1/100C-1 Operating weight: 8607/9733kg Net engine power: 52.4kW THE STRONGEST CONTENDER. THE JCB 90Z AND 100C ARE QUITE SIMPLY THE TOUGHEST 9 TO 10-TONNE EXCAVATORS WE VE EVER BUILT.
More informationTB240 COMPACT EXCAVATOR. Operating Weight: 4,070 kg. From World First to World Leader
COMPACT EXCAVATOR TB240 From World First to World Leader Operating Weight: 4,070 kg Product Features & Specifications ENGINE - Machine Models 124000003 or Later: EU Stage III A / EPA Tier 4 Emission Compliant
More informationNET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment.
NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC 35MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance and Versatility
More informationOperating Weight : 15,095kg
Operating Weight : 15,095kg TOUGH, POWERFUL, RELIABLE Large Floor with Foot Rest Wraparound Counterweight Triple Flanged Track Rollers LED Work Lights The new TB2150 hydraulic excavator is the largest
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB235-2 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 - Automatic Fuel Bleed System - Dual Element Air Filter - Automatic Idle ELECTRICAL
More informationENGINE HYDRAULICS SWING SYSTEM UNDERCARRIAGE TRACK DRIVE ENVIRONMENT JS220 TRACKED EXCAVATOR. Model
Model Type Nett power (ISO 3046-1NF) Piston Displacement Injection Air Filtration Cooling Starter motor Batteries Alternator Refuelling pump Swing motor Swing brake Final drive Swing speed Swing gear Swing
More informationLubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
More informationMIDI EXCAVATOR 65R-1/67C-1
MIDI EXCAVATOR 65R-1/67C-1 Operating weight: 6625/6760 kg Net engine power: 33.1/38.4 kw QUALITY TIME. JCB S NEW-GENERATION 65R AND 67C ARE THE STRONGEST, MOST DURABLE, HIGH-PERFORMANCE 6-TONNE EXCAVATORS
More information301.5, 301.6, Mini Hydraulic Excavator
301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563
More informationNET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment.
NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. PC18MR-3 C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance
More informationTB240 Compact Excavator
TB240 Compact Excavator Those in the know, know Takeuchi TB210R TB216 TB230 TB240 TB260 TB280FR TB290 TB1140 SERIES 2 ENGINE - - Automatic Fuel Bleed System - Extended Life Coolant - Dual Element Air Filter
More informationTRACKED EXCAVATOR JS460 LONG REACH
MAX. OPERATING WEIGHT: 51408 kg (113335 lb) GROSS ENGINE POWER: 228 kw (305 hp) E K D G F L M H C I J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4400 (14-4) B Undercarriage
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More informationCX75C OPERATOR ENVIRONMENT
CX75C MSR EXCAVATOR STANDARD & OFFSET BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel
More informationA Product of Hard Work COMPACT LOADING SHOVEL 403
A Product of Hard Work Go anywhere, do anything compact performance Compact dimensions allow the 403 to access restricted farm buildings and other sites Hydrostatic transmission makes it easy for anyone
More information300.9D. Mini Hydraulic Excavator
300.9D Mini Hydraulic Excavator Engine Gross Power (ISO 14396) 13.7 kw 18 hp Net Power 9.6 kw 13 hp Weight Operating weight without Safety frame 935 kg 2,061 lb Operating weight with Safety frame 985 kg
More informationJCB TRACKED EXCAVATOR JS220 LONG REACH
MAX. OPERATING WEIGHT NETT ENGINE POWER 22100 kg 102 kw (138 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 3660 (12-0) B Undercarriage overall
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationTRACKED EXCAVATOR JZ140HD
J Z1 TRACKED EXCAVATOR JZ140HD MAX. OPERATING WEIGHT: 17409 kg ENGINE POWER: 73 kw (98 hp) E I H K J F JZ140 HD 4 0HD L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on
More informationTRACKED EXCAVATOR JZ140 LC
TRACKED EXCAVATOR LC MAX. OPERATING WEIGHT: 589 kg (353 lb) 665 kg (3677 lb) WITH BLADE MAX. ENGINE POWER: 73 kw (98 hp) E I H K F HD HD L M G C D A B STATIC DIMENSIONS MONOBOOM Dimensions in millimetres
More informationTRACKED EXCAVATOR JS145LC
S TRACKED EXCAVATOR SLC MAX. OPERATING WEIGHT: 200 kg (330 lb) MAX. ENGINE POWER: 73 kw (98 hp) E I H K F S L M G C D A B STATIC DIMENSIONS SLC MONOBOOM Dimensions in millimetres (ft-in) A Track length
More informationCX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,
More informationJCB TRACKED EXCAVATOR JS 330 LONG REACH
MAX. OPERATING WEIGHT NETT ENGINE POWER 3990 kg (7973 lb) TIER 3 0 kw (71 hp) TIER 17 kw (39 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground
More information325 COMPACT EXCAVATOR SPECIFICATIONS
325 COMPACT EXCAVATOR SPECIFICATIONS F WORKING RANGE D E Standard Arm Long Arm A. Maximum Blade Depth... 16.9" (429 mm)... 16.9" (429 mm) B. Maximum Blade Height... 15.5" (393 mm)... 15.5" (393 mm) C.
More informationTB2150 HYDRAULIC EXCAVATOR. Operating Weight: 15,095 kg. From World First to World Leader
HYDRAULIC EXCAVATOR TB2150 From World First to World Leader Operating Weight: 15,095 kg Product Features & Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - DOC+SCR Exhaust After Treatment
More information302.5C Mini Hydraulic Excavator
302.5C Mini Hydraulic Excavator Engine Rated net power 18.6 kw 24.9 hp (ISO 9249) Weights Operating weight 2745 kg 6,052 lb with canopy Operating weight 2850 kg 6,283 lb with cab Weight with rubber tracks,
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More informationJCB BACKHOE LOADER 3C
MAX. ENGINE POWER 85hp (63kW) F E B C J H D A G STATIC DIMENSIONS JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB260 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed
More informationJCB TRACKED EXCAVATOR JS 330 LC/NLC TIER 3
TIER 3 MAX. OPERATING WEIGHT NETT ENGINE POWER 33288 kg (73387 lb) 202 kw (271 hp) I E H M N J F K L G C D A B STATIC DIMENSIONS JS330 LC/NLC MONOBOOM Dimensions in millimetres (ft-in) LC NLC A Track length
More informationTRACKED EXCAVATOR JS360 LONG REACH
MAX. OPERATING WEIGHT: 42150 kg (92925) lb NETT ENGINE POWER: TIER 3 202 kw (271 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4021 (13-2)
More informationA Product of Hard Work BACKHOE LOADER 1CX SERIES
A Product of Hard Work BAKHOE LOADER X SERIES Big solution in a small package Superb manoeuvrability lets you operate in tight areas Wide choice of loader and backhoe attachments increases versatility
More information305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)
305C CR Mini Hydraulic Excavator Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight) With canopy With cab 35 kw/47.6 hp 5035 kg 5155 kg Caterpillar 305C CR Mini
More informationCX55BMTS OPERATING WEIGHT. Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment: 11,312 lb (5 130 kg)
CX55BMTS COMPACT EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Yanmar 4TNV88-C-PYB Tier 4 Final Certified Cylinders 4 Bore/ 3.46 x 3.54 in (88 x 90 mm) Displacement 133.6 in 3 (2.2 L) Fuel injection Direct
More informationJCB BACKHOE LOADER MINI CX 4x4 SERIES II
MAX. ENGINE POWER: MAX. BAKHOE DIG DEPTH (STANDARD DIPPER): MAX. LOADER APAITY: 16.8kW (22.5hp) 2540mm (8ft 4in) 625kg (1378lb) A B G E F H D 1 STATI DIMENSIONS mm (ft-in) A Overall height to canopy 2170
More information8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW
8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW STRENGTH, DURABILITY & PRODUCTIVITY THE MIDI EXCAVATOR FROM JCB OFFERS COMPACT, VERSATILE PERFORMANCE. EXPERIENCE SUPERB LEVELS
More informationA Product of Hard Work ROUGH TERRAIN FORK LIFT
A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro
More information